MRP-64 MRP-64. Multi-Room Control Processor. Key Features. Description. Call w w w. r t i c o r p. c o m

Transcription

1 MRP-64 MRP-64 The MRP-64 embraces a new concept in distributed audio by acting as the interface between today s multi-zone audio/video receiver and an assortment of RTI in-wall and handheld controllers. Never before has such a robust distributed audio system been possible at such an affordable price. The MRP-64 allows the homeowner to take full advantage of the multi-zone features built into their surround receiver expanding the entertainment Key Features Expands virtually any home theater/multi-zone receiver into a distributed audio system. beyond the media room. With the MRP-64 all of the audio/video sources from the media room can now be accessed anywhere in the home with the simple touch of a button. Six keypad inputs to provide power and communication. Two RS-232 ports for bi-directional communication. Compatible with RTI Zigbee Transceiver Module for two-way communication. Preprogrammed RS-232 drivers for popular multi-zone receivers. Three programmable 12VDC trigger outputs. Three assignable voltage sense inputs. IR input for IR pass-through or control. Four addressable IR emitter ports are compatible with industry standard IR emitters and repeater systems. One addressable high IR output for connecting additional IR connecting block/emitters. All output ports incorporate both short-circuit and overload protection. Variable power on all IR output ports. Programmed using TheaterTouch Designer software. Non-volatile Flash memory stores your system configuration even when power is not present. Description The MRP-64 is a powerhouse of control in a small package. Loaded with features, the MRP-64 has six keypad ports for RTI In-wall controllers, four independent IR output ports, three voltage trigger outputs, three voltage sense inputs and an IR signal input. The MRP-64 also comes equipped with advanced features such as an Ethernet port for control and programming, two-way RS-232 communication, support for Zigbee wireless communication, and other expansion capabilities. An IR input insures compatibility with all RTI in-wall and handheld controllers as well as industry standard IR repeater systems. No special programming is necessary since the bi-directional RS-232 drivers are preprogrammed and developed as part of RTI s Integration Partner Program. USB and Ethernet programming. Call w w w. r t i c o r p. c o m

2 STATUS USB RS-232 KEYPADS LINK ETHERNET RTI EXPANSION / IR +12VDC TRIGGER +3-24VDC SENSE PORT PORT 2 IR OUTPUT LEVEL PORT 3 PORT 4 Specifications Power Supply...+12V DC, 4A IR Output Ports...Four 3.5mm jacks... Compatible with industry standard IR emitters IR Output Drive...100mA maximum (per port, adjustable)...200ma maximum (high IR output port) Infrared Frequency Transmission Range... 15kHz - 460kHz Infrared Input...Compatible with industry-standard repeaters and receivers Trigger Outputs... Three, 12 VDC, 100mA max each Sense Inputs...Three, 3-24VDC RS-232 Ports...Two, Bi-directional RJ45 Connections Ethernet Port... 10/100Base-T, RJ45 Connection USB Ports...1 Programming Control Port...RS-485 / IR / Pwr, RJ45 Connection RTI Com Port...Two-way Zigbee Communication Port, RJ45 Connection Keypad Ports...Six, RS-485 / IR/ Pwr Mounting...Wall-mount or free standing Dimensions (W x H x D) (208mm) x 1.3 (33mm) x 5.2 (132mm) Weight... 2 lb. (907g) Warranty... One Year (Parts & Labor) All specifications subject to change without notice Accessories RM-433 RF Receiver ZM-24 Zigbee Transceiver Module ECB-5 IR Emitter Connecting Block CB-4 Touchpanel Connecting Block RCM-12 Relay Control Module Other RTI Products T1 Universal System Controller M2 Universal System Controller T2+ Universal System Controller T2-Cs Universal System Controller T2-C Universal System Controller T3 Universal System Controller T3-V Universal System Controller T4 Universal System Controller U1 Waterproof Controller Installation Diagram U2 Waterproof Controller RTI Keypad RTI Keypad Multi-Zone Receiver RKM-1 RK1 In-Wall Multi-room Audio Keypad In-Wall Keypad Controller Receiver RK2 In-Wall Touchscreen Controller RK3 In-Wall Touchscreen Controller 12VDC Triggered Devices K4 In-Wall Touchscreen Controller Amplifer IR-PRO Infrared Capture System Model MRP-64 Amplifier + 12VDC SIGNAL IN HIGH OUT TRIGGER OUT 1 TRIGGER OUT 2 TRIGGER OUT 3 SENSE INPUT 1 SENSE INPUT 2 SENSE INPUT 3 IR Controlled Devices IR Receiver CD Player RM-433 RM-433 Receiver DVD Player Digital Satellite TheaterTouch Designer Programming Software

3 RCM-12 RCM-12 Relay Control Module The RCM-12 Relay Control Module provides twelve addressable relays for controlling everything from amplifiers to window coverings. Adjustable device IDs allow easy expendability for larger projects. With both an IR input and a control port, each relay can be triggered from RTI in-wall or handheld controllers, control processors or even thirdparty infrared repeater systems. Each relay can be used in a normally open or normally closed configuration and 12VDC is supplied if voltage triggers are needed. Key Features Twelve individually addressable relays. Relays capable of switching up to 28VDC@5A. Discrete set of IR codes and an IR input allows relays to be triggered from virtually any IR programmable system. Control port for connection to RTI Control Processors. Relays can be used in a normally open or normally closed configuration. Relays create a dry contact or a 12VDC connection is supplied if a voltage trigger is required. Programmable momentary relay hold times. Adjustable device ID for installations that require more than twelve relays. Sturdy steel construction. 12VDC power supply included. Description With twelve individually addressable relays and an adjustable device ID, the RCM-12 Relay Control Module is flexible and expandable enough to provide relay control for projects of any size. Each relay has a removable terminal block with connections for either a normally open or normally closed configuration. Using the supplied 12VDC output, it is also possible to use any relay as a voltage trigger. An IR input and an RS-485 port allow the RCM-12 to be triggered from many different sources, including RTI in-wall or handheld controllers, control processors or third-party infrared repeater systems. IR commands trigger open and close functions as well as adjustable hold times for momentary relay operation. Call w w w. r t i c o r p. c o m

4 CONTROL STATUS DEVICE ID PWR / IR RELAY 7 RELAY 1 RELAY 8 RELAY 2 RELAY 9 RELAY 3 RELAY 10 RELAY 4 RELAY 11 RELAY 5 RELAY 12 RELAY 6 STATUS USB RS-232 KEYPADS LINK ETHERNET RTI EXPANSION / IR +12VDC TRIGGER +3-24VDC SENSE PORT PORT 2 IR OUTPUT LEVEL PORT 3 PORT 4 Specifications Processors / Accessories Power Supply...+12V DC, 1.25A Infrared Input...Compatible with industry-standard repeaters and receivers Relays...Twelve, 28 VDC@5A Control Port...RS-485/IR/Pwr Device IDs... Eight, Rotary switch Mounting...Wall-mount or free standing Dimensions (W x H x D) (209mm) x 1.3 (33mm) x 5.2 (132mm) Weight... 2 lb. (907g) Warranty... One Year (Parts & Labor) All specifications subject to change without notice RP-1 RP-6 MRP-64 XP-8 CB-4 ECB-5 Remote Control Processor Remote Control Processor Advanced Control Processor Touchpanel Connecting Block IR Emitter Connecting Block Other RTI Products Relay Control Module Curtain Controller RCM-12 Installation Diagram T1 Universal System Controller M2 Universal System Controller T2+ Universal System Controller T2-Cs Universal System Controller T2-C Universal System Controller T3 Universal System Controller T3-V Universal System Controller T4 Universal System Controller U1 Waterproof Controller U2 Waterproof Controller RKM-1 In-Wall Multi-Room Audio Keypad RK1 In-Wall Keypad Controller RK2 In-Wall Touchscreen Controller RK3 In-Wall Touchscreen Controller K4 In-Wall Touchscreen Controller IR-PRO Infrared Capture System +12VDC GND IR IN Relay Controlled Devices Projection Screen Amplifier Model MRP VDC SIGNAL IN HIGH OUT TRIGGER OUT 1 TRIGGER OUT 2 TRIGGER OUT 3 SENSE INPUT 1 SENSE INPUT 2 SENSE INPUT 3 IR Receiver RM-433 RTI Keypad TheaterTouch Designer Programming Software

5 ZM-24 ZM-24 Zigbee Transceiver Module The ZM-24 transceiver module provides bi-directional communication between two-way enabled RTI remote controls and control processors utilizing Zigbee wireless communication. Capable of being configured in two different modes, the ZM-24 can be hard-wired directly to a control processor as the coordinator or be used as a wireless repeater device to create an ultra-reliable, self-healing mesh network. Key Features Enables bi-directional Zigbee communication. Wireless Zigbee communication range between ZM-24 modules up to 100 feet. Connects to a central processor from up to 1000 feet away using standard Cat5 cable. Can be used in coordinator mode or create a self-healing mesh network by adding modules configured in repeater mode. Utilizes IEEE wireless Zigbee communication at 2.4Ghz. Durable plastic enclosure and adjustable antenna. Receives power from an RTI control processor or from the included power supply. Easy mounting with a detachable wall bracket. Description Utilizing the latest in wireless technology, the ZM-24 Zigbee Transceiver Module is capable of more than just receiving signals - it can transmit signals as well. This creates a bi-directional communication link between Zigbee enabled RTI control processors and handheld remote controls. Feedback, such as song meta-data or volume level from supported devices can now be viewed on the remote control. The ZM-24 is easy to install, since only one module needs to be hardwired to the control processor. This device becomes the coordinator, while additional repeater modules can be added by simply powering them from any electrical outlet within communication range of other modules. The ZM-24 units will then create a self-healing mesh network which adapts to changes or problems with the communication path.

6 STATUS USB RS-232 KEYPADS LINK ETHERNET RTI EXPANSION / IR +12VDC TRIGGER +3-24VDC SENSE PORT 1 PORT 2 IR OUTPUT LEVEL PORT 3 PORT 4 Specifications Power...+9VDC to +16VDC, 60mA RTI Com Port... Two-way Zigbee Communication Port, RJ45 Connection... Drives up to 1000 ft (300 m) of wire Wireless Networking... IEEE Zigbee network compliant RF Frequency Range Ghz - 2.5Ghz Operating Temperature F to +122 F (0 C to +50 C) Operating Humidity...5% to 95% Non-condensing Device Capability... Total number of devices is limited only by memory Communications...OTA (Over-the-air) Programmable Enclosure...High-impact molded ABS plastic, black Mounting...Detachable bracket Dimensions - Antenna Flat (WxHxD) (89mm) x 4.0 (101mm) x 1.1 (28mm) Dimensions - Antenna Extend. (WxHxD) (89mm) x 7.25 (184mm) x 1.1 (28mm) Weight... 4 oz (113g) Warranty...One Year (Parts & Labor) All specifications subject to change without notice Installation Diagram Zigbee Mesh Network Repeater Repeater Model ZM-24 Model ZM-24 Model ZM-24 Zigbee Module Zigbee Module Zigbee Module Control Systems MRP-64 XP-8 Advanced Control Processor Other RTI Products T1 Universal System Controller T2+ Universal System Controller M2 Universal System Controller T2-Cs Universal System Controller T2-C Universal System Controller T3 Universal System Controller T3-V Universal System Controller T4 Universal System Controller U1 Waterproof Controller U2 Waterproof Controller RKM-1 In-Wall Multi-Room Audio Keypad RK1 In-Wall Keypad Controller RK2 In-Wall Touchscreen Controller RK3 In-Wall Touchscreen Controller K4 In-Wall Touchscreen Controller IR-PRO Infrared Capture System RTI Com Model MRP VDC SIGNAL IN HIGH OUT TRIGGER OUT 1 TRIGGER OUT 2 TRIGGER OUT 3 SENSE INPUT 1 SENSE INPUT 2 SENSE INPUT 3 Two-way Enabled Devices TheaterTouch Designer Programming Software Media Center Receiver