MRP. line. Standard range dedicated to servo-applications requiring precision, robustness and economy
|
|
|
- Polly Lindsey
- 7 years ago
- Views:
Transcription
1 MRP line Standard range dedicated to servo-applications requiring precision, robustness and economy Up to 90 Nm rated Satellite gears are cantilever supported on hardened and ground shafts Output shaft is supported by ball bearings in order to increase radial load capability and lifetime Backlash: from 15 to 8 arc-minutes Output end mounting face features 8 threaded holes Efficiency: from 91% to 96%* Up to 13 standard ratios / custom ratios available Great choice of interfaces (8 threaded mounting face holes & shaft hole) Easy 1 minute clamping onto any motor shaft (self-locating input flange) Standard case temperature range is 0 C to +90 C - Consult us for higher or lower temperature use Protection rated IP 54 standard Optional lubrication for food-processing or pharmaceutical industries Estimated life time hours *depending upon ratio and size 1
2 MRP 050 Ratio ( Rated / max speed rpm / (consult us if you require higher input speed) Rated power Kw Rated torque Nm Accel. torque Nm ( Rated torque Nm Accel. torque Nm ( Inertia Kgm x10-5 ( Max. backlash arc-min Weight Kg Radial load N ( 700 Axial load N 700 Ø (1 Stage) / 97 ( Stages) * 4,5 Ø44 M4x8Dp. * 30 * 18 4 x 4 x 16 Max. Ø11 Ø 1k6 Ø 35 h6 Ø17mm. 55 min / max * 5 * 4 M4 DIN 33 D
3 MRP 070 Ratio ( Rated / max speed rpm / (consult us if you require higher input speed) Rated power Kw Rated torque Nm Accel. torque Nm ( Rated torque Nm Accel. torque Nm ( Inertia Kgm x10-5 ( Max. backlash arc-min Weight Kg 1.5 Radial load N ( Axial load N Ø (1 Stage) / 119 ( Stages) * 36 Ø6 M5x10Dp. 38 * x 5 x 5 Max. Ø16 Ø 16k6 Ø 5 h6 Output view 3 * 5 M5 DIN 33 D 3
4 MRP 090 Ratio ( Rated / max speed rpm / (consult us if you require higher input speed) Rated power Kw Rated torque Nm Accel. torque Nm ( Rated torque Nm Accel. torque Nm ( Inertia Kgm x10-5 ( Max. backlash arc-min Weight Kg 3 4 Radial load N ( 500 Axial load N 000 Ø (1 Stage) / 160 ( Stages) * 46 Ø80 M6x1Dp. * x 6 x 3 Ø k6 Ø 68 h6 Max. Ø19 Ø40mm. 90 min / max * 40 * 5 M8 DIN 33 D Output view 4
5 MRP 10 Ratio ( Rated / max speed rpm / (consult us if you require higher input speed) Rated power Kw Rated torque Nm Accel. torque Nm ( Rated torque Nm Accel. torque Nm ( Inertia Kgm x10-5 ( Max. backlash arc-min Weight Kg 7 9 Radial load N ( Axial load N Ø (1 Stage) / 0 ( Stages) * 70 Ø108 M8x15Dp x 8 x 50 Max. Ø3 4 Ø 3k6 Ø 90 h6 Output view 5 * 6 M1 DIN 33 D 5
6 MRP 155 Ratio ( Rated / max speed rpm 000 / (consult us if you require higher input speed) Rated power Kw Rated torque Nm Accel. torque Nm ( Output Rated torque Nm Accel. torque Nm ( Inertia Kgm x10-5 ( Max. backlash arc-min Weight Kg Radial load N ( Axial load N Ø 154,5 160 (1 Stage) / 0 ( Stages) * 97 Ø140 M10x0Dp. * x 8 x 60 Max. Ø38 6 Ø 40k6 Ø 10 h6 Ø65mm. 150 min / max * 6 * 8 M16 DIN 33 D 6
PLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE
20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l
D C S e r v o S y s t e m s RH Mini Series Total Motion Control Harmonic Drive acutator P r e c i s i o n G e a r i n g & M o t i o n C o n t r o l Precision Gearing & Motion Control DC SERVO ACTUATORS
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
D.C. Motors. Products and specifications subject to change without notice.
D.C. Motors Order/Technical Support - Tel: (8) 677-5 / FAX: (8) 677-865 / www.crouzet-usa.com / DC Motors Selection guide Gearbox Speed Torque max (Nm).5. Type of Gearbox 8 8 8. Power usable (w) Torque
PSA-G Precision Gearheads
Zero Backlash High Torque PSA-G Precision Gearheads High Precision When your applications require accurate positioning and precise motion control, Harmonic Drive Technologies offers the perfect solution.
Tool Turrets and Tool Discs
Our other products Automatic Tool Changer Chucking Cylinders Tool Discs Indexing Tables Tool Turrets and Tool Discs Pragati Automation Pvt. Ltd. 1, IV Phase, 11th Cross, Peenya Industrial Area Bangalore
MACHINE TOOL SPINDLE DRIVE GEARBOXES MSD RAM-MSD
RX_GB_019_5:RAM - RAM MSD 1/07/2009 1:5 Page 2 MACHINE TOOL SPINDLE DRIVE GEARBOXES MSD RAM-MSD RX_GB_019_5:RAM - RAM MSD 1/07/2009 1:5 Page MSD & RAM-MSD REDEX ANDANTEX Spirit Overview - Products Range
Planetary and Right Angle
Planetary and Right Angle Gearboxes Precision gearboxes Economical precision gearboxes. Can be supplied with interfaces to complement the intelligent Reliance Cool Muscle Motor. Planetary Gearboxes Standard
Quick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
DryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
TECHNICAL DATASHEET Incremental Encoder RI 58-H
Through hollow shaft High accuracy by means of integrated flexible coupling Safe shaft mounting Applications: textile machines, motors, drives, copiers NUMBER OF PULSES 1 / 2 / 3 / 4 / 5 / 10 / 15 / 20
Ultra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
IP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
ANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.
ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX INTRODUCTION Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg.
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Housing diameter Shaft diameter 1. Flange (Mounting of housing) Protection class shaft input (EN 60529) Protection class housing (EN 60529)
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
Description. Dimensions. Features. www.pwb-encoders.com. precision works better
Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature
HPF Hollow Shaft Unit Type
HPF Hollow Shaft Size Model: 25, 32 Peak torque Model: 25= 100 Nm Model: 32 = 220 Nm Small backlash Standard: 3 min. or less Types Reduction ratio 1 11 Inside diameter of the hollow shaft Model: 25 = 25
ECO 80 PRODUCT DESCRIPTION FEATURES. Power output S1 100% Adjustable air nozzle. Liquid cooling. Minimalmengenschmierung MMS retrofit
A PRODUCT DESCRIPTION Power output S6 40% Power output S1 100% Rotation speed Diameter Spindlehousing Spindle interface 3.0 kw 2.5 kw to 40.000 rpm 80 mm Stainless steel HSK - E25 FEATURES Adjustable air
Series 7500 Torque Sensor
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW
ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
Synchronous servo motors. IndraDyn S MSK for all requirements
IndraDyn S MSK for all requirements 2 Bosch Rexroth AG Electric Drives and Controls Compact and powerful Documentation Project planning manual Application description for potentially explosive areas Maximum
Borstlösa DC-motorer. Promoco Scandinavia AB
Borstlösa DC-motorer Promoco Scandinavia AB BL Series Brushless DC Motors with Integral Drive 24, 54, 68, and 70 mm diameters, 2W up to 110W output power Allied Motion s BL series of small brushless DC
ANDANTEX USA INC. 2 Speed Spindle Gearboxes MSD RAM-MSD
NDNTEX US INC. 2 Speed Spindle Gearboxes SD R-SD CHINE TOOL Spindle Drive Gearboxes SD & R-SD Overview - Principle IPROVING THE PRODUCTI- VITY WHILE KEEPING THE HIGHEST PRECISION REDEX-NDNTEX s two speed
DIAMOND Gear Company, LTD. an ERIKS Company. Installation, Maintenance, & Operation Manual Declutchable Worm Gear
DIAMOND Gear Company, LTD. an ERIKS Company Installation, Maintenance, & Operation Manual Declutchable Worm Gear 2016 DECLUTCHABLE WORM GEAR INSTRUCTIONS This is an instructional manual which provides
HB Stepping Motor and HB Stepping Gearmotor
HB Stepping Motor and HB Stepping Gearmotor Product Number Code For Hybrid Stepping Motor FL - Shaft Type: A=Single, B=Double MA=0.9Degree,Single;MB=0.9Degree,Double DA=.Degree,Single; DB=.Degree,Double
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque
Encoder WDG 58B. www.wachendorff-automation.com/wdg58b
Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
Torque motors. direct drive technology
Torque motors direct drive technology Why Direct Drive Motors? Fast and effective Direct-drive technology in mechanical engineering is defined as the use of actuators which transfer their power directly
AC Servo Motors and Servo Rated Gearheads
AC Servo Motors and Servo Rated Gearheads for the automation industry Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8)
Internal gear pump PGF Series 2X and 3X
Internal gear pump GF eries 2X and 3X RE 23 Edition: 4.24 Replaces: 5.2 Fixed displacement Frame sizes, 2 and 3 izes.7 to 4 Maximum pressure 25 bar Displacement.7 to 4 cm 3 H758 Features ow operating noise
TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD
Direct mounting without coupling Flexible hollow shaft design up to diameter 4 mm Through hollow shaft or as end shaft (blind shaft) Easy installation by means of clamping shaft or blind shaft Short overall
Systematic Optimisation of Gearboxes for Hybrid and Electric Vehicles in Terms of Efficiency, NVH and Durability
Systematic Optimisation of Gearboxes for Hybrid and Electric Vehicles in Terms of Efficiency, NVH and Durability Dr. Artur Grunwald GKN Driveline 1 Content of presentation Scope and introduction Gearbox
How To Power A Schen
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Automation / Mini Type SCH32F Hollow Shaft Encoder - Ø 32 mm Hollow Bore: Ø 6 mm to Ø 3/8 inch Resolution up to 5000 ppr IP 65 (IP 50 for IDC connector option) Electrical Specifications Code: Resolution:
BoWex SD, SD1 and SD2 Operating-/Assembly Instructions
D-807 Rheine 0111 E 1 curved-tooth gear couplings are flexible shaft connections. They are able to compensate for shaft displacement caused by, as an example, inaccuracies in production, heat expansion,
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
ZF W325 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
Specifications for Volkswagen Industrial Engine
Volkswagen 1 industrial engine Specifications for Volkswagen Industrial Engine AFD 1.9 ltr. TDI diesel engine EURO 2 Volkswagen AG, Wolfsburg Volkswagen AG reserves the right to introduce amendments or
ORTHOBLOC 3000. Drive systems. Installation. This manual is to be given to the end user. 3996 en - 2013.04 / k. R max - 5 mm.
en - 01.0 / k 1 en This manual is to be given to the end user --> B7 (0 to 0 ) R max - mm R min + mm ORTHOBLOC 000 Installation LEROY-SOMER Ot 000 en - 01.0 / k NOTE LEROY-SOMER reserves the right to modify
TECHNICAL DATASHEET Incremental Encoder RI 80-E
Incremental 30-45 hollow shaft Rugged mechanical design Unbreakable disc Integrated diagnostic system Wide voltage range DC 5-30 V Isolated shaft NUMBER OF PULSES 1024 / 2048 / 2500 / 4096 / 5000 / 10000
ZF W320 Vertical offset, direct mount marine transmission.
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
NORD GEARED MOTORS F 1000. Getriebebau NORD. www.nord.com D R I V E S Y S T E M S
I N T E L L I G E N T D R I V E S Y S T E M S, W O R L D W I D E S E R V I C E S NORD GEARED MOTORS F 1000 GB www.nord.com Getriebebau NORD D R I V E S Y S T E M S Unicase Housing: The Optimal Design Getriebebau
Material: Weight: Bearing Life: Shaft Loads: Operating Temp.: Storage Temp.: Shock: Vibration: Bump: Humidity: Enclosure Rating: Cable: Cable Glands:
Oil & Gas / Heavy Industry EX-Proof Stainless Steel Shaft Encoder - Ø 68 mm Shaft - Ø 10 mm to Ø 5/8 inch Resolution up to 10,000 ppr IP 66 (IP 67 option) ATEX certified EX-Proof IECEx certified EX-Proof
Leading-edge technology for machine tools
Leading-edge technology for machine tools We combine five specialists in one Improving productivity and successfully distinguishing themselves from the competition are key objectives for machine tool
MINEX -S. Magnetic coupling. You will find continuously updated data in our online catalogue at www.ktr.com
MINEX - 171 Table of contents NEW MINEX - 171 Coupling description 173 Technical description 174 s A 22/4 to B 60/8 with containment shroud made of stainless steel 175 s A 75/10 to F 250/38 with containment
Siemens AG 2009. Spindle solutions. Spindle motors and motor spindles for every requirement. Brochure October 2009. Motors. Answers for industry.
Spindle solutions Spindle motors and motor spindles for every requirement Brochure October 2009 Motors Answers for industry. The right spindle solution for any task The function, performance and accuracy
United Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
ABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
Miniature High-Torque, DC Servomotors and DC Gearmotors
typical applications Robotics Factory automation Medical equipment Computer peripherals and office equipment Portable, battery-operated equipment Textile machinery Packaging machinery Actuators Miniature
Small Coreless DC Motors
CL Series 3 to 25 W Coreless DC Motors Smooth-running, optimized-performance coreless DC motors Small Coreless DC Motors Allied Motion s CL series of small coreless DC motors provides maximized performance
Highly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
BMD. Permanent Magnet AC Synchronous Motors
BMD Permanent Magnet AC Synchronous Motors Power, control and green solutions About us 3 Bonfiglioli, one name for a large international group. It was back in 1956 that Clementino Bonfiglioli established
DT Media Newsletter. New impetus for drive systems: Newly developed generation of geared motors provides a pivotal link for consistent drive solutions
New impetus for drive systems: Newly developed generation of geared motors provides a pivotal link for consistent drive solutions Geared motors are encountered in practically every sector of industry.
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES
THREE-PHASE SQUIRREL CAGE ASYNCHRONOUS MOTORS AL SERIES IE2 FRAMES 80 355 0,75 315kW (1500rpm) FOR INVERTER DUTY Code Declaration of conformity The motors described in this catalogue satisfy the essential
Profile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
3-PHASE STEPPING MOTOR. VRDM 39x. Document: 100000116 Edition: d013, 2005.02
-PHASE STEPPING MOTOR VRDM 9x Edition: d, 5. Features common to all motor types Test voltage to DIN EN 64 part Insulation class F Run-out and perpendicularity to DIN 4955 N Paint: black RAL 95 Security
Water-cooled three-phase asynchronous motors. Type series K21B / K23B
Water-cooled three-phase asynchronous motors Type series K21B / K23B Contents Page Introduction 3 Standards and regulations 4 Design version 4 Water cooling 5 Degree of protection 5 Drain holes 5 Vibration
Ball Rail Tables TKK. with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company
with Ball Rail Systems and Ball Screw Drive R310EN 2501 (2008.04) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
Johnson Power Ltd. / MAINA GEAR COUPLINGS
PGE 1 Johnson Power Ltd. / MIN GER OUPLINGS Johnson Power, Ltd. is now pleased to offer Maina gear couplings. Maina designs and manufactures a complete line of gear couplings and spindles for industrial
Machine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX
Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These
Fixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
TECHNICAL DATASHEET Incremental Encoder RI 58-O / RI 58-T
Universal industry standard encoder Up to 40 000 steps with 0 000 pulses High signal accuracy Protection class up to IP67 Flexible due to many flange and configuration variants Suitable for high shock
Actuators and positioning drives
Actuators and positioning drives distributed by www.laumans.com Actuators and positioning drives FlexiDrive product range type MDBA 42 MSQA 46 MSAA 42 Actuator Actuator Actuator motor brush DC motor brush
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Mobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6*M Denison Vane Technology, fixed displacement Contents GENERAL Series T6 Mobile, Denison Vane Pumps Features...3 Instructions...3 Minimum & maximum speeds...4 Pressure ratings...4
THE COMPOSITE DISC - A NEW JOINT FOR HIGH POWER DRIVESHAFTS
THE COMPOSITE DISC - A NEW JOINT FOR HIGH POWER DRIVESHAFTS Dr Andrew Pollard Principal Engineer GKN Technology UK INTRODUCTION There is a wide choice of flexible couplings for power transmission applications,
TORQUE LIMITERS COMPACT AND BACKLASH FREE. SERIES SK + ES 0.1 2,800 Nm. single-position multi-position load holding full disengagement
COMPACT AND BACKLASH FREE. single-position TORQUE LIMITERS SERIES SK + ES 0.1 2,800 Nm THE ULTIMATE COUPLING FROM 0.1 2,800 Nm BACKLASH-FREE TORQUE LIMITERS Areas of application Machine tools CNC machining
STANDARD BALL SCREWS. Standard High Precision Ball Screws Available From Stock For Immediate Delivery Machined and Delivered in Days
STNDRD B SCRWS 2004 Release www.danahermotion.com Standard High Precision Ball Screws vailable From Stock For Immediate Delivery Machined and Delivered in Days Ball Screw products of Warner lectric and
STATIC STIFFNESS ANALYSIS OF HIGH FREQUENCY MILLING SPINDLE
STATIC STIFFNESS ANALYSIS OF HIGH FREQUENCY MILLING SPINDLE Anandkumar Telang Assistant.Professor, Mechanical Engg Department, BKIT, Bhalki, Karnataka, India Abstract Compared with conventional spindles,
SIMOTICS Low-Voltage Motors
SIMOTICS Low-Voltage Motors 'LVWULEXWLRQ RIIHULQJ 7KLV WHFKQLFDO EURFKXUH IRFXVHV RQ D VHOHFWHG PRWRU VSHFWUXP VSHFLILFDOO\ GHILQHG IRU WKH GLVWULEXWLRQ EXVLQHVV FRYHULQJ DOO PDLQ VWDQGDUG DSSOLFDWLRQV
SVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
industrial drive systems PM LINE Permanent magnet single-surface brake 86 611..H00 86 621..H00
industrial drive systems PM LINE Permanent magnet single-surface brake 86 611..H00 86 621..H00 PM LINE Kendrion (Aerzen) GmbH, Germany Kendrion (Villingen) GmbH, Germany Kendrion Magnetic (Suzhou) Co.
A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
SBL/K Motor Catalogue 2002
SBL/K Motor Catalogue 2002 Brushless Servomotors up to 32Nm Motor Technology Ltd. Motec House Chadkirk Ind. Est. Romiley Stockport Cheshire SK6 3LE England Tel. +44(0)161 427 3641 Fax. +44(0)161 427 1306
Linear Systems. Main Catalog
Linear Systems Main Catalog MOVITEC Linear Systems The Italian company Impex Tecniche Lineari designs and manufactures a wide range of products under the brand name MOVITEC: Electromechanical and pneumatic
SPINDLE PROGRAMME MILLING MILLING SPINDLES BEST SELECTION. WEISS Spindeltechnologie GmbH A Siemens Company
SPINDLE PROGRAMME MILLING MILLING SPINDLES BEST SELECTION WEISS Spindeltechnologie GmbH A Siemens Company GSS GLOBAL SPINDLE SOLUTIONS MILLING SPINDLES MILLING FOR EVERY APPLICATION MORE THAN 1,000 DRIVE
Engineering Data CSD-2UF/2UH Units
Engineering Data CSD-2UF/2UH Units QUICKLINK www.harmonicdrive.de/2070 Contents 1. General... 03 1.1 Description of Safety Al.ert Symbol.s...04 1.2 Discl.aimer and Copyright...04 2. Safety and Instal.l.ation
LENORD. +BAUER... automates motion. PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space
PowerDRIVE-Positioning GEL 6109 Compact positioning drive for installation situations with limited space LENORD +BAUER... automates motion. Technical information Version 2014-09 General The PowerDRIVE-Positioning
High Pressure Gear Motors KM 1
High Pressure Gear Motors KM 1 2 KRACHT GmbH Gewerbestr. 2 58791 Werdohl, Germany fon +49()23 92/935- fax +49()23 92/935 29 mail info@kracht.eu web www.kracht.eu Construction 1 5 8 9 1 2 6 4 7 3 1 Housing
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
maxon sensor maxon sensor
Sensor Spindle drive Gearhead E Motor (BLD Motor) D Motor X Drives (configurable) Motor control obust encoders, D tachometers, and resolvers with high accuracy and high signal resolution. Due to resonance,
ZF 301 A. Marine Propulsion Systems
Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Description Robust design also withstands continuous duty in workboat applications. Fully works tested, reliable and simple to
Mounting Instructions. Torque Transducer. A0329 3.2 en
Mounting Instructions Torque Transducer T5 T5 Contents 3 Page Safety instructions.............................................. 4 1 Measuring characteristics..................................... 7 2 Mounting.....................................................
Stepper Motor and Driver Package AZ Series Equipped with Battery-Free Absolute Sensor ADVANCED
Z DVNCED Z Z PS HPG Z TS DVNCED 3 Z BZO MEXE Z Z 6 Z Z Z 7 Z66C Z66C 1 8 6 Z66C 8 MEXE MEXE MEXE 9 Z MEXE MEXE MEXE 1 11 Z DG TS PS HPG ES Z EZS Z EC Z Z TS PS HPG TS PS HPG "System Configuration Built-in
Encoder WDGI 58H. www.wachendorff-automation.com/wdgi58h
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
Compact Dynamic Brushless Servo motors CD Series
Compact Dynamic Brushless Servo motors CD Series Low inertia, compact length servo motors for highly dynamic applications Rev. A, May What moves your world Introduction Whenever the highest levels of motion
Pressure and flow control system
Pressure and flow control system RE 30030/04.09 1/32 Replaces: RE 30024/11.03 RE 30027/06.04 RE 30030/01.04 Type SYDFE1, SYDFEE, SYDFEC, SYDFEn Size 18 to 140 Component series 2X Maximum operating pressure
EC303 0608701017 50 1/4" quickchange 0608800630 EC303 0608701017 740. 3GE27 0608720053 50 3/8" square with 0608800631 EC303 0608701017 1.
2 Bosch Rexroth AG Electric Drives and Controls Documentation Output drives Measurement transducer Gearboxes EC motor Advantages: For tight drill holes Standard tool mounts Flange connection for easy assembly
United Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson, Dover, Pacific Scientific, Portescap,