EVOKE GEL SYSTEM by Odyssey. Base Gel:

Size: px
Start display at page:

Download "EVOKE GEL SYSTEM by Odyssey. Base Gel:"

Transcription

1 EVOKE GEL SYSTEM by Odyssey Base Gel: Even our products are formulated to adhere to the natural nail as well as to existing enhancement. Bonder will increase the adhesion to the nail plate for all of our products. Bonder should be used sparingly! The nail should look moist and a little glossy! All Purpose Crystal It is our strongest gel! All Purpose Crystal is self-leveling, crystal clear, hard, flexible and strong. All Purpose Crystal can be used on any client with any type of nail. All Purpose Crystal is also a great product to be used with clients who have allergies. Please call us and we can help you determine if the All Purpose Crystal can be used on a sensitive client. Uses: Fills and full sets Builder: Transparent Pink Builder is a phenomenal product and has been touted as a nail material that out performs any acrylic! It is great for doing Full-sets, fills or repairs. Put it in place and it will hold! Builder is not self-leveling and should be applied sparingly. There is little heat generated with the Builder! It is a great product to get an acrylic user to start using gels! Builder adheres to the natural nail and will need to be filed and buffed to shape. Finisher or 1- Step need to be applied over the Builder for a shine. Recommended uses for the Builder: Full-sets and fills Converting acrylic nail technicians to gels Sculpting or forming a nail Ski-jump and thin nails French Tip French Tip is a nice, attractive, white gel for creating awesome looking tips. French Tip is not self-leveling and can be formed into a tip, put on a glue-on tip, or over existing product such as Builder, acrylic or fiberglass. Recommended uses for French Tip are: French manicures Sculpting or forming a tip White Art Great for doing a French manicure fill! White Art is a very bright white with a sharp white look! This is an easy product to work with. White Art is self-leveling, won t yellow and makes doing a French Manicure on a fill a bit easier than using the French Tip. It is not designed to sculpt with on a form, but it can be applied over

2 tips, or existing product. White Art should be applied as thick as a sheet of paper. Recommended uses: French Manicure over tips, natural nail, or over other products such as Extreme, Builder, acrylic or other enhancements DO NOT USE White Art TO FORM A TIP ON THE NAIL, apply over free-edge that was formed with a clear gel such as Extreme Gel. Hints & Trouble Shooting: Applying the White Art too thick can lead to lifting problems at the free-edge or sidewall because of insufficient curing. This is best avoided by starting out applying thin amounts to the nail, and as you become accustomed to the White Art, applying thicker amounts that are more desirable. Top GEL Top Gel is an UV cured material coat that produces a very high shine. It must be put on a buffed, cleansed nail. The shine can last up to four weeks without yellowing! Uses: Apply Top Gel coat over gels for a high shine Apply Top Gel coat over acrylics or fiberglass wraps Natural nail manicure Hints & Trouble Shooting: If there are dull streaks in the Top Gel it was not cured long enough in your lamp. Buff the surface of the nail, cleanse and re-apply the Top Gel. Consider that it may be time to change your bulbs. Top Gel can be applied to acrylic nails, but it must be mentioned that the use of Cleanser on the acrylic after filing or buffing the surface of the acrylic will lead to adhesion failure. Cleanse the acrylic prior to buffing the surface, buff and then dust the nail with a clean DRY cleansing pad. Apply Top Gel to the nail and cure. EVOKE Color Arts The Evoke Color Arts are spectacular colored gel that can be used to replace polish and has no dry time! Evoke Color Arts can be used to create wonderful nail art! Apply the Evoke Color Arts gel in two thin coats before the Finisher to get the desired coverage. There is no wearing of the free-edge of the nail and the color will not chip or crack! Can be applied over sticky residue or etched, dusted and cleansed surface. Evoke Color Arts adhere to any enhancement as well as natural nails. Great for pedicures! Application: Curing Light Curing lights are the most crucial aspect of using gels. The proper lamp AND bulb is the most critical aspect that will make the gel work or fail. We strongly recommend the use of 9-watt bulbs manufactured by SLI, Phillips or Sylvania UK only! Anything other than these manufacturers will cause failure and dissatisfaction with the product. The results of the wrong bulb being used are lifting, soft product, lack of shine and luster and allergies. The bulb must be used in a good quality lamp. The quality of the lamp has a great effect on the longevity of the bulb, cure strength and satisfaction of the performance of the gel product. Cure times for all of the products should be 2 minutes and no less than 90 seconds with good quality bulbs. Bulbs should be changed every 6-12 months. It is past the time to change bulbs when: 1. The All Purpose Crystal, finishing Gel or Top Gel does not cure to a high shine. 2. The product is lifting or is soft. 3. There is a grey band at the base of the bulb (remove bulb from lamp to examine). It is much better to change the bulbs before they MUST be changed. If the above circumstances are seen, then the repairs on the poorly cured nails will be time consuming and extensive.

3 Cleansing of the Nail- Gel Cleanser A good quality cleansing agent is very important for good adhesion. Do not use anything that contains: Fragrance Dye or color Water The use of isopropyl alcohol, acetone, methyl ethyl ketone, isobutyl ketone, ethyl acetate, methyl acetate, butyl acetate is strongly recommended. The most cost effective cleansing agents to use are isopropyl alcohol and acetone. Be sure to use the highest grade of solvent available. Do not use recycled solvents because they may contain oils used in paints. Nail Preparation Nail preparation is the cornerstone for the rest of the enhancement. Without good nail preparation, the enhancement will fail. We recommend a very specific nail preparation procedure that will increase your success tremendously and if you follow this procedure, you will become successful at UV cured nails in much less time than if you do not follow these directions. Keep in mind that your client has been touching things throughout the day prior to her arrival at your salon. She may have oils on her hands from lunch, lotion, or from her body. These oils can be removed from her fingers by the use of soap and water, but this leaves soap residue. We recommend that you cleanse her nails with a clean cleansing pad and Evoke Gel Cleanser completely before you begin to file on her nails. Throw this cleansing pad away; if you re-use it you will contaminate her nails with the residue you removed originally. 1) Push back the cuticle and remove eponychium 2) Cleanse the nail thoroughly with Evoke Gel Cleanser and a Wipe. 3) Remove the shine from the nail then etch the surface of the nail with a new 150 grit file. 4) Cleanse the nail thoroughly with Gel Cleanser. 5) Inspect each nail for a uniform white appearance. The nail should have a white powder-like appearance. If the nail looks powdery, then you have done a great nail preparation job! Forming of Tips The use of a form to create a tip is a difficult method to create an extension, but the result is worth the effort. The first step in using a form is most crucial. The form must fit tightly between the nail and the tip of the finger. Often the form needs to be cut in the back to allow the opening or closing of the form around the knuckle. This allows the form to be adjusted so that it continues with the slope of the nail as to create a proper extension. The use of a stick is common to help adjust the placement of the form to ensure its proper fit between the finger tip and the nail. Once the form is in place, apply the French Tip or Natural Tip to the nail by rolling the product from the brush onto the free-edge of the nail and the form. Gently push the product around the smile line and pull it over the nail and form so that the block of the form can be seen through the product. The black blocks should appear as a very light gray. If you can not see the blocks, then the product will not cure completely and this can cause lifting. Once the form is removed, the product will appear as the white or the natural color you desire. Nail Finishing When finishing the nail, be sure to shape an arch and curve into the nail. It is critical that the sidewalls of the nail are not filed too thin because this can lead to cracking in the stress area and lifting at the sidewalls. Gels file much easier and faster than acrylics so the nail technician must be careful not to file away the gel or file the gel so thin that it leads to cracking. Please use caution when filing the gels. Do not feel the nail with your finger while filing. This will deposit oils onto the surface of the nail and will lead to lifting and a blotchy appearance.

4 Suggested Full-Set Methods Full-Set with Tips Prepare the nail apply the tip to the nail and etch the tip with your file (do not cleanse the tip this will remove the etching of the tip and cause lifting) Apply Builder gels or Crystal Gel (for arch and curve) Reapply Crystal Gel (for thickness and strength), Cleanse, shape, Cleanse, Cleanse (Do Not Cleanse the Top Gel) Full-Set Sculpting with Forms Prepare the nail (see Nail Preparation ) Apply the form Apply Builder gels or Crystal Gel (for arch and curve) Reapply Crystal Gel (for thickness and strength), Cleanse, shape, Cleanse, Cleanse (Do Not Cleanse the Top Gel) Suggested Fill Methods Natural Look Prepare the nail (see Nail Preparation ) Builder gels or Crystal Gel (for thickness and strength), Cleanse (Do Not Cleanse the Top Gel) French Manicure Prepare the nail (see Nail Preparation ) Apply White Art (for a white tip) Apply All Purpose Crystal (for thickness and strength), Cleanse, shape, Cleanse, Cleanse (Do Not Cleanse the Top Gel)

5 Trouble Shooting, Handling & Storage Trouble Shooting Guide Lifting in cuticle area Cleanse the nail prior to filing in the preparation phase. Do not touch the skin or cuticle with the product Make sure all of the shine is removed when preparing the nail Cleanse the nail with Evoke Gel Cleanser prior to preparing the nail Cleanse the nail with Evoke Gel Cleanser after preparing the nail Look closely at the nail before beginning to apply the product to make certain that the nail looks white and chalky Apply an extremely thin amount of Bonder to the nail Replace your bulbs Lifting at the free-edge Cleanse the nail prior to filing in the preparation phase. Cap the free-edge on every coat of product If using a white product, apply a thinner coat of French Tip, Natural Tip or Ultra-White Replace your bulbs Apply an extremely thin amount of Bonder to the nail Make sure all of the shine is removed when preparing the nail Be sure to etch the edge of the free-edge of the nail Cleanse the nail with Evoke Gel Cleanser prior to preparing the nail Cleanse the nail with Evoke Gel Cleanser after preparing the nail Look closely at the nail before beginning to apply the product to make certain that the nail looks white and Chalky "Burning" or Heat Sensation Reduce the amount of material placed on the nail Insert the hand into the light for 3 seconds and out for 3 seconds. Repeat this two more times Cracking Make the application thicker in the stress area Shape the nail so that there is a smooth and continual curve from the stress area to the cuticle, free-edge and sidewalls Use Fiber Make sure that the side-wall of the nail is prepared properly with the file Round shapes are much stronger than flat shapes Make sure you are using a Evoke approved lamp and good bulbs. Be sure to cover all of sidewalls with product. Soft Product Use a Evoke approved lamp Change bulbs immediately Cure product twice the recommended period of time

6 White Circle in Stress Area Use a Evoke approved lamp Change bulbs immediately Apply thinner coats of product Cure product twice the recommended period of time Handling and Storage Skin Contact: Try to avoid or reduce contact with the skin. This is quite important because some people can develop allergies to any chemical, Evoke included. When you cleanse the nail, cleanse only the nail and pull the product off the tip of the nail rather than cleanse in a swirling or stroking motion. Storage: Avoid exposure to UV light including but not limited to sunlight, UV light from the lamp, some compact fluorescent bulbs, inert gases and flame. Containers Only use opaque containers or amber glass bottles. Do not use containers made of styrene or polyethylene. Use of containers that are clear or blue tinted glass will result in curing of the gel within the container.

Client s hand and nails should be properly placed far enough under. lamp bulbs

Client s hand and nails should be properly placed far enough under. lamp bulbs TROUBLESHOOTING UV GEL Problem: Undercuring Gel enhancements feel sticky after curing and wiping Improper hand placement Gel may have been applied too thickly Client s hand and nails should be properly

More information

Pink & White Gel Tip Overlay Rules, Judges Instructions & Criteria Student Division Competition Rules

Pink & White Gel Tip Overlay Rules, Judges Instructions & Criteria Student Division Competition Rules Competition Rules 1. Total time allowed 3 hours (180 minutes) 2. These are traditional square style competition nails. 3. The nails must be applied with Tips and Gel overlay 4. The competitor must apply

More information

About Perfect Nails Advanced Gel System - frequently asked questions.

About Perfect Nails Advanced Gel System - frequently asked questions. About Perfect Nails Advanced Gel System - frequently asked questions. What is Perfect Nails Advanced Gel System? The system uses four major components to create gel nail enhancements. A Bonder Gel to ensure

More information

Step-by-Step Guide. ENHANCEMENTS Brisa UV Gel Enhancements Rebalancing. STEP 1: Cleanse

Step-by-Step Guide. ENHANCEMENTS Brisa UV Gel Enhancements Rebalancing. STEP 1: Cleanse Step-by-Step Guide ENHANCEMENTS Brisa UV Gel Enhancements Rebalancing 1 HOUR Rebalancing is a method of maintaining the balance and beauty of the enhancement while the natural nail grows. Proper rebalancing

More information

TrūShine Gel Enamel FAQs

TrūShine Gel Enamel FAQs Q. Is TrūShine Gel Enamel 5-Free? TrūShine Gel Enamel FAQs Yes. All TrūShine Gel Enamel formulas are without DBP, Formaldehyde, Toluene, Formaldehyde Resin, and Camphor. Q. Can Host Rewards be applied

More information

PRODUCT FACTS. Copyright 2012 Artistic Nail Design, All rights reserved. 17

PRODUCT FACTS. Copyright 2012 Artistic Nail Design, All rights reserved. 17 17 Soak Off Bonding Gel ARTISTIC SOAK OFF BONDING GEL creates the adhesion between the natural keratin in the nail plate and the artificial gel products. No primer needed prior to application. This product

More information

Q&A. SHELLAC SYSTEM: XPRESS5 Top Coat

Q&A. SHELLAC SYSTEM: XPRESS5 Top Coat XPRESS5 TOP COAT SHELLAC SYSTE M FORMULA 1. What does the name XPRESS5 mean? The SHELLAC XPRESS5 Top Coat name reflects the speed of removal in just 5 minutes. 2. Does XPRESS5 Top Coat have the Yes, XPRESS5

More information

Brisa UV Gel Enhancements Sculpted on a Tip

Brisa UV Gel Enhancements Sculpted on a Tip Step-by-Step Guide Brisa UV Gel Enhancements Sculpted on a Tip 90 MIN A service designed for problem nails with no natural nail extension edge, requiring length and re-design. STEP 1: P.R.E.P. f. Apply

More information

Leave the past behind Be in a league of your own. Application Guide. en Vogue Sculptured Nail Systems Inc.

Leave the past behind Be in a league of your own. Application Guide. en Vogue Sculptured Nail Systems Inc. Leave the past behind Be in a league of your own Application Guide 1 Registered Trademark en Copyright Vogue Sculptured 2013 Nail by Systems en Vogue Inc. Sculptured Nail Systems Inc. 2 TABLE OF CONTENTS

More information

SHELLAC Brand Application & Removal

SHELLAC Brand Application & Removal Step-by-Step Guide SHELLAC Brand & Removal 45 MIN SHELLAC Brand 14+ Day Nail Color combines the ease of polish with incomparable high-performance wear and stunning crystal shine. A true innovation in chip-free,

More information

GEL FX: Frequently asked Questions

GEL FX: Frequently asked Questions GEL FX: Frequently asked Questions Q1. Is Gel FX formulated without Formaldehyde Toluene and DBP? A. At ORLY International, we provide our clients with finest ingredients and best products on the market.

More information

Gel Manicures and Pedicures

Gel Manicures and Pedicures Gel Manicures and Pedicures Gel Manicures and Pedicures While gel systems for manicures and pedicures have been available for more than three decades, their recent popularity is driven by technological

More information

Almond SPAMANICURE. Step-by-Step Guide INDULGENT AND RELAXING

Almond SPAMANICURE. Step-by-Step Guide INDULGENT AND RELAXING Step-by-Step Guide Almond SPAMANICURE INDULGENT AND RELAXING 60 MIN A journey cradled in sweet almond and jojoba oils and vitamin E. A soothing menu entrée to comfort and indulge clients time after time.

More information

CHOOSING THE RIGHT RESIN POLYESTER RESIN

CHOOSING THE RIGHT RESIN POLYESTER RESIN CHOOSING THE RIGHT RESIN POLYESTER RESIN Polyester is a liquid which will cure to a solid when the is added. It has been specially formulated to cure at room temperature. The, MEKP (Methyl Ethyl Ketone

More information

SC4000 CEMENT BONDING PROCEDURES

SC4000 CEMENT BONDING PROCEDURES Pg.1 SC4000 CEMENT BONDING PROCEDURES The REMA TIP TOP SC4000 Bonding System is free of chlorinated hydrocarbons (CFC), and consists of the following products: REMA TIP TOP Cement SC4000 + E40 Hardener

More information

How To Make BIG HOLE BEADS

How To Make BIG HOLE BEADS Fine Folly Glassworks Presents How To Make BIG HOLE BEADS also known as European Charm Beads, Pandora, Biagi & Troll Beads SO, WHAT ARE THEY CALLED? These beads have many names Pandora beads, Biagi and

More information

DASH KIT INSTALLATION

DASH KIT INSTALLATION ÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿ ÿÿÿÿÿ ÿÿ ÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿ ÿÿÿÿ ÿÿ ÿÿÿÿÿ ÿÿÿÿÿÿÿÿ PROUDLY MADE IN THE USA DASH KIT INSTALLATION These instructions are aimed at the do-it-yourself installer. Read

More information

Surface Decoration. Design techniques used to put on the surface of the pottery. Slip Oxides Glaze Embossed Incised Wax on wet Altered from the wheel

Surface Decoration. Design techniques used to put on the surface of the pottery. Slip Oxides Glaze Embossed Incised Wax on wet Altered from the wheel Surface Decoration Design techniques used to put on the surface of the pottery. Slip Oxides Glaze Embossed Incised Wax on wet Altered from the wheel Slip How to apply slip Colored slip is intended to add

More information

VC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised

VC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised Page 1 of 6 instructions VC 104+ Rigid Grade / VC 104+ Rigid Grade Imagine / (for the rest of this document referred to as VC 104) can be applied to new and used trucks and trailers with painted rigid

More information

SC2000 CEMENT BONDING PROCEDURES

SC2000 CEMENT BONDING PROCEDURES Pg.1 SC2000 CEMENT BONDING PROCEDURES Widely recognized as the world s finest cold vulcanizing cement REMA SC2000 is the solution to your industrial bonding problems. By using REMA UTR20 hardener with

More information

1-800-862-2731 Administration of Meropenem For Child

1-800-862-2731 Administration of Meropenem For Child 1 Drug Name: _Meropenem 1-800-862-2731 Administration of Meropenem For Child Dosage: milligrams every hours over 5 minutes Key Points: FLUSHING: Meropenem Heparin flush 1. Always wash your hands with an

More information

Tractor Painting Tips

Tractor Painting Tips Keeping your tractor or equipment well kept & free from rust & corrosion will extend the life of your investment & help retain its value for a longer period of time. It can be difficult, in many cases,

More information

R44 SERVICE BULLETIN SB-89 (supersedes R44 Safety Alert dated 23 February 2015)

R44 SERVICE BULLETIN SB-89 (supersedes R44 Safety Alert dated 23 February 2015) R44 SERVICE BULLETIN SB-89 (supersedes R44 Safety Alert dated 23 February 2015) Page 1 of 6 DATE: 30 March 2015 TO: R44 & R44 II Owners, Operators, and Maintenance Personnel SUBJECT: Main Rotor Blade Modification

More information

1-800-862-2731. Administration of Meropenem 2 Grams

1-800-862-2731. Administration of Meropenem 2 Grams 1 1-800-862-2731 Administration of Meropenem 2 Grams Drug Name: _Meropenem_2 grams Dosage: 2grams every hours over 10 minutes Key Points: FLUSHING: Saline Meropenem Saline Heparin 1. Always wash your hands

More information

Fletching Instructions

Fletching Instructions Fletching Instructions An Archer s guide to Adhesion AMB- Version 12-2012 CHEMISTRY DIVISION Prepare Check your work area (table, area and hands) for possible adhesion contaminants: oil, food, silicones,

More information

BLADE REPAIR INSTRUCTION BOOKLET

BLADE REPAIR INSTRUCTION BOOKLET BLADE REPAIR INSTRUCTION BOOKLET Contents Section I: Section II: Section III: Section IV: Section V: Section VI: Removing a Blade Refer to this section if you need to remove the blade from an oar shaft.

More information

Matrix 2360 Blade Sharpening Instructions

Matrix 2360 Blade Sharpening Instructions Matrix 2360 Blade Sharpening Instructions P/N 12-037947 C Revision: C June 2009 Matrix 2360 Blade Sharpening Instructions Proprietary Notice and Liability Disclaimer The product described in this document

More information

Wood Finishing & Refinishing

Wood Finishing & Refinishing extension.usu.edu Fact Sheet #7 Sealing, Staining, and Filling Wood Finishing & Refinishing Dr. Leona K. Hawks Home Furnishings and Housing Specialist 1995 HI 27 Many people today find satisfaction in

More information

Acrylic Walls Installation Instructions

Acrylic Walls Installation Instructions Acrylic Walls Installation Instructions IMPORTANT Please read carefully the following instructions before installing your shower acrylic walls. If you have any questions on this shower acrylic walls installation

More information

Roppe Vinyl Stair Treads

Roppe Vinyl Stair Treads Maintenance 7.1.1 Required Initial Maintenance DO NOT scrub or mop the stair treads for at least 72 hours after the installation is completed to allow the adhesive, Quik-Stik Adhesive Tape and ROPECC Epoxy

More information

Instructions for use: Repatha (ri-path-a) (evolocumab) Single-Use Prefilled Syringe. Guide to parts

Instructions for use: Repatha (ri-path-a) (evolocumab) Single-Use Prefilled Syringe. Guide to parts Instructions for use: Repatha (ri-path-a) (evolocumab) Single-Use Prefilled Syringe Before use Plunger rod Guide to parts Used plunger After use Used syringe barrel Medicine Syringe barrel Used Needle

More information

1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time

1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time How to apply Arctic Alumina Premium Ceramic Thermal Adhesive 1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure

More information

1-800-862-2731 Administration of IV Medications Using an Minibag Plus System

1-800-862-2731 Administration of IV Medications Using an Minibag Plus System 1-800-862-2731 Administration of IV Medications Using an Minibag Plus System Drug Name: Volume and Rate: Schedule: FLUSHING: Saline Drug Saline Heparin KEY POINTS: 1. Always wash your hands with an antibacterial

More information

Electronics and Soldering Notes

Electronics and Soldering Notes Electronics and Soldering Notes The Tools You ll Need While there are literally one hundred tools for soldering, testing, and fixing electronic circuits, you only need a few to make robot. These tools

More information

Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a

Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a professional-looking paint job for hundreds of dollars less

More information

Selection, Use, and Care of Brushes

Selection, Use, and Care of Brushes Wood Finishing & Refinishing Fact Sheet #2 Selection, Use, and Care of Brushes Dr. Leona K. Hawks Home Furnishings and Housing Specialist 1995 HI 22 Good results in wood refinishing depend to a large extent

More information

QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS

QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine TM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical

More information

CHROME FX PUMP SYSTEM APPLICATION GUIDE

CHROME FX PUMP SYSTEM APPLICATION GUIDE CHROME FX PUMP SYSTEM APPLICATION GUIDE The ChromeFX Pump System, uses a silver nitrate deposition process, to create a mirror finish, on nearly any surface. Unlike traditional so-called chrome paints

More information

Scotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013

Scotch-Weld TM. Acrylic Adhesives. DP8405NS Green. Product Data Sheet. Date: March 2014 Supersedes: August 2013 Scotch-Weld TM Product Data Sheet Acrylic Adhesives Date: Supersedes: August 2013 Product Description 3M TM Scotch-Weld Acrylic Adhesives are high performance, twopart acrylic adhesives that offer good

More information

Chica and Jo

Chica and Jo Presented by Chica and Jo www.chicaandjo.com INSTRUCTIONS FOR Magic Folding Photo Cube Hello! We re so excited that you want to make a folding photo cube! You can find more info on our website here: http://chicaandjo.com/photo-cube

More information

Training Manual 4th Edition

Training Manual 4th Edition Training Manual 4th Edition TM TABLE OF CONTENTS Introduction.... 2 Nail Anatomy / Zone Map.... 3 Choosing the Correct Enhancement System.... 4 10-Step Quick Prep.... 5 Application of Nail Tips & Forms....

More information

PR11 Plastic Repair, Adhesive

PR11 Plastic Repair, Adhesive Uniform Procedures For Collision Repair PR11 Plastic Repair, Adhesive 1. Description This procedure describes methods for making adhesive repairs to most types of exterior and interior automotive plastics.

More information

1995 HI 26. There are two kinds of abrasives used in smoothing wood. They are steel wool and sandpaper.

1995 HI 26. There are two kinds of abrasives used in smoothing wood. They are steel wool and sandpaper. extension.usu.edu Fact Sheet #6 SANDING Wood Finishing & Refinishing Dr. Leona K. Hawks Home Furnshings and Housing Specialist 1995 HI 26 You might spend many hours staining, finishing, and polishing,

More information

Dr Marvey the secret to marvelous nails... Nail treatment line offers the latest advancements in nail care with better-for-you plant based formulas

Dr Marvey the secret to marvelous nails... Nail treatment line offers the latest advancements in nail care with better-for-you plant based formulas For Immediate Release Contact: Heather Johnson Alternatives 212 239-0600 heather@altny.com Dr Marvey the secret to marvelous nails... Nail treatment line offers the latest advancements in nail care with

More information

Gelatin Bubbles. Tami Utley. www.sugarartbytami.com. Materials:

Gelatin Bubbles. Tami Utley. www.sugarartbytami.com. Materials: Gelatin Bubbles By Tami Utley www.sugarartbytami.com Materials: Water Balloons Unflavored Gelatin Luster Dust (Super pearl or others) Toothpick or tweezers Small microwave safe bowl Duct tape Styrofoam

More information

The purpose of major case prints is to record all friction ridge detail

The purpose of major case prints is to record all friction ridge detail Chapter 12 Major Case Prints The purpose of major case prints is to record all friction ridge detail so that complete and accurate finger and palm print comparisons can be completed. This includes the

More information

Crystal Clear Sealant

Crystal Clear Sealant Crystal Clear Sealant Technical Data February, 2012 Product Description 3M Crystal Clear Sealant is a one component thermoplastic elastomer which forms permanent elastic bonds when used in surface sealing

More information

Tuning. Prepared by Shane and Kristen

Tuning. Prepared by Shane and Kristen Prepared by Shane and Kristen For a quality tune and wax job, there are several things one must do. In this report you will learn how to tune and wax your skis with easy instructions and photos. Tuning

More information

Instructions for Use Aranesp (Air-uh-nesp) (darbepoetin alfa) Injection Single-Dose Prefilled Syringe (SingleJect )

Instructions for Use Aranesp (Air-uh-nesp) (darbepoetin alfa) Injection Single-Dose Prefilled Syringe (SingleJect ) Instructions for Use Aranesp (Air-uh-nesp) (darbepoetin alfa) Injection Single-Dose Prefilled Syringe (SingleJect ) Guide to parts Before use After use Plunger rod Used plunger rod Finger grip Label and

More information

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1. 212 F (100 C) calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1. 212 F (100 C) calculated VOC-US/Hong Kong. US EPA method 24 (tested) Not approved 2063;2064 1,2 2063 ^(ValidationDate) 1 Product description This is a two component solvent free polyamine cured coating. It is a general purpose tank lining with good chemical resistance.

More information

Cedar-Strip Canoe Part 2: Stripping the canoe with cedar strips

Cedar-Strip Canoe Part 2: Stripping the canoe with cedar strips Cedar-Strip Canoe Part 2: Stripping the canoe with cedar strips Now the fun really begins - building the cedar hull and covering it with fiberglass. You ve done the tedious but necessary groundwork, building

More information

HARD SURFACE PAPERS INSTRUCTION GUIDE

HARD SURFACE PAPERS INSTRUCTION GUIDE HARD SURFACE PAPERS INSTRUCTION GUIDE I Contents Page Paropy...2 Paropy I...3 Paropy...4 Acrylic...5 Cardboard Puzzles...6 Ceramic Mugs...7 Ceramic Tiles...9 Crystal...10 Glass...10 Leather...11 Magnets...11

More information

You can paint polish over your NSI nails. However, always use a NON-Acetone based nail polish remover.

You can paint polish over your NSI nails. However, always use a NON-Acetone based nail polish remover. BLUSH AFTERCARE ADVICE NSI Gel, Gelish, Natural Nails Please read the following advice as a guide to the aftercare for your treatment at BLUSH. The following guidelines are to help ensure that you get

More information

Your simple guide to. French polishing

Your simple guide to. French polishing Your simple guide to French polishing Manufacturer of quality finishes With over 100 years experience of treating wood Liberon s heritage lies in the manufacture and development of traditional finishes

More information

Sterile Dressing Change with Tegaderm CHG for Central Venous Catheter (CVC)

Sterile Dressing Change with Tegaderm CHG for Central Venous Catheter (CVC) Sterile Dressing Change with Tegaderm CHG for Central Venous Catheter (CVC) The dressing protects your catheter site. It also helps prevent infection at the site. Keep your dressing clean and dry at all

More information

SC, FC and ST * Hot Melt Fiber Optic Connectors

SC, FC and ST * Hot Melt Fiber Optic Connectors SC, FC and ST * Hot Melt Fiber Optic Connectors Instructions September 1998 78-8073-7873-8 2 Contents 1.0 Safety and Helpful Hints...4 2.0 Field Termination Kit Contents...4 3.0 STÑInstallation on 900

More information

Clay Feature Tutorial

Clay Feature Tutorial Clay Feature Tutorial This tutorial can be used to apply any type of feature to a vinyl doll. Keep in mind that baked clay will be NON-flexible whereas, vinyl will remain flexible. In the following photos,

More information

AT WORK AT SCHOOL AT HOME. Whiteboard, Blackout Blind, Sticky Notes and Blackboard on a roll! Clings using static!

AT WORK AT SCHOOL AT HOME. Whiteboard, Blackout Blind, Sticky Notes and Blackboard on a roll! Clings using static! AT WORK AT SCHOOL AT HOME Whiteboard, Blackout Blind, Sticky Notes and Blackboard on a roll! Clings using static! About Magic Whiteboard Products................................ 3 Magic Whiteboard...............................................

More information

Cutting Clay with Your Klic-N-Kut

Cutting Clay with Your Klic-N-Kut Cutting Clay with Your Klic-N-Kut by Judy Keating January 31, 2010 There are many types of items that can be made from polymer clay that has been cut with the Klic-N-Kut cutter. Those include buttons,

More information

Active and Passive Sash Replacement

Active and Passive Sash Replacement for Andersen Gliding Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete the procedure, call Andersen at 1-888-888-7020 for

More information

FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH

FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH FINGERPRINT CLEAN HANDS ONLY DRY HANDS THOROUGHLY ROLL FINGERS FROM NAIL-TO-NAIL NOTE THE CORES AND DELTAS TAKE IMPRESSIONS IN CORRECT ORDER PRODUCE

More information

Screen Melts. Introduction. Selecting Screen Material. Prefire Before Using. Spalling. Kiln Shelf

Screen Melts. Introduction. Selecting Screen Material. Prefire Before Using. Spalling. Kiln Shelf Introduction There are two terrific reasons for melting glass through screens. First because screen melts produce uniquely intricate patterns not possible any other way and second because it does it using

More information

HENKEL DUCK TAPE PRODUCT RANGE DIY TAPE RANGE SUMMARY

HENKEL DUCK TAPE PRODUCT RANGE DIY TAPE RANGE SUMMARY DUCK TAPES 1500 0401 Waterproof Duck 50mm x 10m Silver Polyethylene coated cloth tape for 1500 0402 Waterproof Duck 50mm x 50m Silver Polyethylene coated cloth tape for 1500 0403 Waterproof Duck 50mm x

More information

Reconditioning your Maserati s leather Ivan Ruiz February 2005 Updated May 2009

Reconditioning your Maserati s leather Ivan Ruiz February 2005 Updated May 2009 Reconditioning your Maserati s leather Ivan Ruiz February 2005 Updated May 2009 Maserati has traditionally employed high quality Connolly leather in their interiors. There are different grades of Connolly

More information

Drafting Tools page Fig 3-1. Drafting Board. Fig 3-2. T-Square. fig 3-3 Triangles

Drafting Tools page Fig 3-1. Drafting Board. Fig 3-2. T-Square. fig 3-3 Triangles DRAWING BOARD The DRAWING BOARD, fig. 3-1, provides the smooth, flat surface needed for drafting. The tops of many drafting tables are designed for this purpose. Individual drawing boards are manufactured

More information

FRAMED & MOUNTED TILE MURAL

FRAMED & MOUNTED TILE MURAL Page 1 of 5 There is no denying that tile murals have taken the sublimation industry by storm. The unique ability to take a customer s artwork or high resolution photograph, tile it using your software

More information

Copyright: Maarten Beerten Maycodesign.nl specifically made for University of Rotterdam.

Copyright: Maarten Beerten Maycodesign.nl specifically made for University of Rotterdam. This tutorial is presented to you by Maarten Beerten. www.maycodesign.nl maarten@maycodesign.nl In this tutorial I am going to show you a couple of examples of how to make your drawing different. In my

More information

POWERSANDING WOOD BOWLS by John Franklin

POWERSANDING WOOD BOWLS by John Franklin POWERSANDING WOOD BOWLS by John Franklin We have all been taught to consider sanding a less than desirable function when turning wood. Although skill with your tools will normally reduce the need to do

More information

Recommended Procedures for Use of YSI Water Quality Monitoring Instruments during Oil Spills

Recommended Procedures for Use of YSI Water Quality Monitoring Instruments during Oil Spills Recommended Procedures for Use of YSI Water Quality Monitoring Instruments during Oil Spills Overview: This is a guidance document that is intended for users of YSI 6-Series sondes and handheld instruments

More information

IDENTIFICATION OF POLYMERS 1998 by David A. Katz. All rights reserved

IDENTIFICATION OF POLYMERS 1998 by David A. Katz. All rights reserved IDENTIFICATION OF POLYMERS 1998 by David A. Katz. All rights reserved David A. Katz Chemist, Educator, Science Communicator, and Consultant 133 N. Desert Stream Dr., Tucson, AZ 85745 Voice/Fax: 520-624-2207

More information

Written By: Walter Galan

Written By: Walter Galan ipad 2 GSM Rear Camera Replacement Replace the rear camera in your ipad 2 GSM. Written By: Walter Galan INTRODUCTION Use this guide to replace a broken rear camera. TOOLS: ifixit Opening Picks set of 6

More information

Approved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong

Approved. Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong Approved 8380;8500 2 8380 phenolic/novolac epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. Specially designed tank coating with excellent

More information

Written By: Walter Galan

Written By: Walter Galan ipad 2 GSM LCD Replacement Replace the LCD in your ipad 2 GSM. Written By: Walter Galan INTRODUCTION Use this guide to replace a broken LCD. TOOLS: iopener (1) Phillips #00 Screwdriver (1) Plastic Opening

More information

Caring for Your PleurX Pleural Catheter

Caring for Your PleurX Pleural Catheter Caring for Your PleurX Pleural Catheter A PleurX Pleural Catheter has been placed in your chest through a small incision in your skin into the pleural space (see picture below). This allows you to drain

More information

Laser Cutter User Manual

Laser Cutter User Manual Laser Cutter User Manual frequently asked questions... the laser is cutting weird! it s cutting a thick line or not cutting through at all! Table Of Contents Section 1: Materials Guide 1.1 Can I Cut this?

More information

Tech Notes. PATCHING A GEL COAT Recommended Procedure. INTERPLASTIC CORPORATION Thermoset Resins Divison ISSUE 3

Tech Notes. PATCHING A GEL COAT Recommended Procedure. INTERPLASTIC CORPORATION Thermoset Resins Divison ISSUE 3 INTERPLASTIC CORPORATION Thermoset Resins Divison ISSUE 3 3 Tech Notes PATCHING A GEL COAT Recommended Procedure Issue Date: 9/20/2012 Document ID: TN-TS-03E 2012 Interplastic Corporation Patching a Gel

More information

Ruth s Beauty Wig Maintenance Instructions

Ruth s Beauty Wig Maintenance Instructions Ruth s Beauty Wig Maintenance Instructions Courtesy of www.ruthsbeauty.com and www.ruthsbeautyshop.com Ruth s Beauty encourages you to learn how to care for your purchases. As specialty items, our products

More information

Breathable Treatment + Color

Breathable Treatment + Color CHAPTER 5 SECTION 6 3 Breathable Treatment + Color breathable treatment + color Introducing the first ever Professional Treatment + Color. ORLY Breathable Treatment + Color offers strength-boosting benefits

More information

Ignition Coil Sealing Instructions Revision 1.0

Ignition Coil Sealing Instructions Revision 1.0 Ignition Coil Sealing Instructions Revision 1.0 Parts Required (available at your local auto parts store): - Dielectric Grease - High Temp RTV Silicone - Waterproof crimp on terminals. 0.250" female, sealed,

More information

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 30 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 30 C calculated VOC-US/Hong Kong. US EPA method 24 (tested) Approved 3140;3240;4320 1,2 3140 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very

More information

Document Library TS Data Sheet 46012 46013 46014

Document Library TS Data Sheet 46012 46013 46014 Document Library TS Data Sheet 46012 46013 46014 Rev:2 Effective: 01/11/2002 3M Marine High Strength Repair Filler Data Sheet Status: Active 3M Part No.(s) 46012 46013 46014 3M Part Descriptor(s) Pint

More information

California State Board Cosmetology Exam

California State Board Cosmetology Exam code 94527 California State Board Cosmetology Exam Task 1 Basic Facial 1 Sanitizes Hands before beginning procedure 2 Drapes Client before beginning procedure 3 Drapes client's hair before beginning procedure

More information

Objective. Quality Printing

Objective. Quality Printing Objective Quality Printing Gotham Ink Corporation Water Based Ink Handout Quality Printing Flexographic Printing Ink Printing Press Substrate Printing Ink Types of Ink Water-Based Ink Solvent-Based Ink

More information

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)

Approved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method 1 28 C calculated VOC-US/Hong Kong. US EPA method 24 (tested) Approved 735;739 1 735 phenolic/novolac epoxy ^(ValidationDate) 1 Product description This is a two component polyamine cured phenolic/novolac epoxy coating. It is a specially designed tank lining with

More information

PRT-ES Tubing Installation (ZT03-98-001)

PRT-ES Tubing Installation (ZT03-98-001) PRT-ES Tubing Installation (ZT03-98-001) Background When a heat shrinkable jacket is applied over a cable the jacket creates a secondary protective barrier that provides additional mechanical and electrical

More information

Kontax Stirling Engines KS90 instructions

Kontax Stirling Engines KS90 instructions Kontax Stirling Engines KS90 instructions This document covers the following: Tools required Parts list Assembly instructions Operating instructions Maintenance Contact details: www.stirlingengine.co.uk

More information

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C Other Technical Data Sheet 8744;8745 6 8744 VValidationDate). 1 Product description This is a two component fairing compound/filler. It is an ultra lightweight, solvent free product. It has excellent sanding

More information

Technical Data Sheet February 2014

Technical Data Sheet February 2014 Scotch-Weld Technical Data Sheet February 2014 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened products

More information

CALIFORNIA COSMETOLOGY PRACTICAL EXAMINATION CANDIDATE INFORMATION BULLETIN

CALIFORNIA COSMETOLOGY PRACTICAL EXAMINATION CANDIDATE INFORMATION BULLETIN CALIFORNIA COSMETOLOGY PRACTICAL EXAMINATION CANDIDATE INFORMATION BULLETIN Please visit www.barbercosmo.ca.gov for the most current bulletin prior to testing. This bulletin contains important information

More information

Paper Chromatography: Separation and Identification of Five Metal Cations

Paper Chromatography: Separation and Identification of Five Metal Cations Paper Chromatography: Separation and Identification of Five Metal Cations Objectives Known and unknown solutions of the metal ions Ag +, Fe 3+, Co 2+, Cu 2+ and Hg 2+ will be analyzed using paper chromatography.

More information

WET CLEANING MANUAL. Wet Cleaning instructions Wet Cleaning best practices Liquid Solution Maintenance

WET CLEANING MANUAL. Wet Cleaning instructions Wet Cleaning best practices Liquid Solution Maintenance WET CLEANING MANUAL Wet Cleaning instructions Wet Cleaning best practices Liquid Solution Maintenance For Products: Sensor Clean VDust Plus Smear Away Green Ultra MXD-100 Swabs Orange DHAP Fabric Swabs

More information

How to Build a Printed Circuit Board. Advanced Circuits Inc 2004

How to Build a Printed Circuit Board. Advanced Circuits Inc 2004 How to Build a Printed Circuit Board 1 This presentation is a work in progress. As methods and processes change it will be updated accordingly. It is intended only as an introduction to the production

More information

Having trouble getting a brilliant finish with Shellawax or Shellawax Cream? STOP BLAMING THE POLISH AND READ THIS!

Having trouble getting a brilliant finish with Shellawax or Shellawax Cream? STOP BLAMING THE POLISH AND READ THIS! Having trouble getting a brilliant finish with Shellawax or Shellawax Cream? STOP BLAMING THE POLISH AND READ THIS! INFO TIPS AND TRICKS for Shellawax & Shellawax Cream From the inventor Neil Ellis Shellawax

More information

PPG HI-TEMP 1027 PRODUCT DATA SHEET. June 30, 2014 Revision of January 28, 2014 DESCRIPTION

PPG HI-TEMP 1027 PRODUCT DATA SHEET. June 30, 2014 Revision of January 28, 2014 DESCRIPTION DESCRIPTION One component, high-build heat-resistant inert multipolymeric matrix coating to prevent corrosion under insulation (CUI) of carbon and stainless steel to temperatures ranging up to 650 C (1200

More information

Salter Industries, Spiral Stair

Salter Industries, Spiral Stair Salter Industries, Spiral Stair Adjustable Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4", 3/16", 3/8" 3. Socket Set 4. Tape Measure

More information

Camouflage Makeup for Party-Perfect Skin

Camouflage Makeup for Party-Perfect Skin Camouflage Makeup for Party-Perfect Skin by Jill Glaser Clinical, or camouflage makeup, is defined as makeup specifically formulated to provide effective coverage for those with serious skin discolorations.

More information

How to Paint a Bee. What you ll need. Select a rock. Paint - White, bright yellow, and black. Brushes Assortment of small and medium brushes

How to Paint a Bee. What you ll need. Select a rock. Paint - White, bright yellow, and black. Brushes Assortment of small and medium brushes How to Paint a Bee What you ll need Paint - White, bright yellow, and black Brushes Assortment of small and medium brushes Other Chalk, pencil, and stylus Photo 1 A simple bee painted on different shaped

More information

Polishes. Compounds, & Buffing Pads

Polishes. Compounds, & Buffing Pads Polishes Compounds, & Buffing Pads Table of Contents Section Page Compounds, Polishes & Buffing Pads...5-19 Accessories...5 Headlight Lens Restoration...6 Rubbing Compounds...7-9 Polishes...9-12 Buffing

More information

Etching using chemicals

Etching using chemicals Etching using chemicals Free tutorial Artsandtechniques.com Arts and Techniques School RJDS inc. Etching using chemicals There are several ways to etch metal, this technique uses a chemical. The etching

More information

INSTRUCTIONS FOR USE HUMIRA 40 MG/0.8 ML SINGLE-USE PEN

INSTRUCTIONS FOR USE HUMIRA 40 MG/0.8 ML SINGLE-USE PEN INSTRUCTIONS FOR USE HUMIRA (Hu-MARE-ah) (adalimumab) 40 MG/0.8 ML SINGLE-USE PEN Do not try to inject HUMIRA yourself until you have been shown the right way to give the injections and have read and understand

More information