Max Top Load = 20 lb.

Transcription

1 HO9290R0TX-WALNUT/ HO9292R0TX-ANTIQUE WHITE HO9291R0TX-BLACK Fold-out Convertible Desk Assembly Instruction For assistance with assembly contact: Southern Enterprises Inc. Customer Service PO# PATENT NUMBER D Max Top Load = 20 lb.

2 HO9290R0TX-WALNUT/HO9292R0TX-ANTIQUE WHITE/HO9291R0TX-BLACK 1 Fold-out Convertible Desk Parts List Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing hardware. Using a screw that is too long will cause damage. Before beginning assembly, separate each type of screw. Carefully study the screw diagrams below. You may receive extra hardware with your unit. 2 Of 2 3 Of 8 Cabinet Shelf Shelf Holder 4 Of 4 5 Of 23 6 Of 3 Plastic Anchor Flat washer 1/4 x5/8 Screw 5/32 x Bracket Screw 5/32 x3/4 Screw 5/32 x1-1/4 10 Level Care and Cleaning Instructions: Before using, wipe with a clean, dry cloth. Periodically apply furniture wax to renew the finish on wood part. Avoid rubbing or scratching the surface with rough or abrasive objects. For replacement parts or questions, please call Customer Service at Please call manufacturer for assistance, questions or parts. Assembly Tool Required No.2 Phillips Screw Driver

3 HO9290R0TX-WALNUT/HO9292R0TX-ANTIQUE WHITE/HO9291R0TX-BLACK Assembly Instruction Step 1: Locate fold-out convertible desk on a solid wall and at a comfortable height off the floor, normally eye level. Step 2: Measure the wall and mark the width and height of desk as Figure 1. Step 3: Measure the wall and mark the location of the center of each mounting holes. See Figure 2. Must be attached to wall stud NOTICE The top 2 screws must be attached to wall studs. Using the level, make sure that all marks are level on the wall. Use Wall Anchors Step 4: Using power drill (with 3/16 drill bit) drill holes on bottom two marks.

4 Step 5: Attach bracket (7) by using screw (8) to the bottom of the unit as shown. Step 6: Insert plastic anchors (4) into the two bottom mounting holes. (When doing this, you will need a hammer help you). Step 7: With an assistant, open and attach cabinet (1) to wall using washer (5), screw (6/9) as shown. Before using the work surface, please make sure the hinges' notch sits right on the gear so that the leg can be fixed. You may need a little push to secure it

5 Step8: Insert pin (3) into the hole of cabinet (1) as shown then put on shelf (2). Place level on top surface to make sure product is level

6 Parts Replacement Form Customer Information Name Address City/State/Zip Code Phone Number Please indicate where you purchased this item: Store/Website/Catalog Please indicate color/size/style number: Style No Parts Letter Parts Description Needed Please immediately examine this product carefully. Any request for missing parts or damage replacement must be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s) and we are not responsible for any damages due to product modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise. Please contact Southern Enterprises at or in Dallas / 9am 4pm Mon-Fri Central time if you have product issues or us at Please ask for customer service representative for issues involving damages or replacement parts. Please ask for technical assistance representative for any issues with product and assembly/construction Please contact the retailer that you purchased from for returns. Customer Service Southern Enterprises, Inc. 600 Freeport Parkway, Suite 200 Coppell, Texas 75019