PR2 Relay Base for: Industrial DPDT or 4PDT Relays

Transcription

1 PR Relay Base for: Industrial DPDT or 4PDT Relays Universal Modular System The 7 mm* (.06 in. wide PR relay base range is a modular system consisting of PR-B... relay bases, robust REL-IR... electromechanical industrial relays with DPDT and 4PDT contacts, and a comprehensive range of accessories. These include: Plug-in input/interference suppression modules Relay retaining bracket with labeling field and eject function Labels Continuous jumpers Depending on the application, complete coupling relays can be created, which are optimized in terms of cost and function. Base Versions The relay bases are available in three versions - the flat / level PR-BSC type with screw connections, and the logical / level PR-BSC with screw connections and PR-BSP with spring-cage connections. The logical versions have coil and contact connections that are located opposite one another and thus meet the requirements of modern control cabinet concepts with clear isolation of control signals and load. Robust, Cost-Effective Industrial Relays Industrial relays are used in many sectors of industry due to their robust structure, which has.6 mm (0. in. flat pins. The main features of the REL/IR... series include the fully automated manufacture of products in conjunction with the high degree of product stability and global availability. The following versions are available: With two A PDT contacts With four 5 A 4PDT contacts In all popular AC and DC coil voltages Considerably wider and more expensive miniature contactors can thus be replaced cost-effectively in many applications without adversely affecting machine or system operation. All industrial relays have the following standard features: Manual test key (AC coil = red key, DC coil = blue key Mechanical switch setting display LED status indicators Free-wheeling diode (only DC types Power contacts with solid gold coating (only types with 4PDT contacts a c Nominal voltage U Nominal current I b Conductor cross section Solid Flexible American Wire Gauge Connection type PR-BSC... PR-BSC... PR-BSP V AC A x.5 mm x.5 mm x 4 AWG 00 V AC A x.5 mm x.5 mm x 4 AWG 00 V AC A x.5 mm x.5 mm x 6 AWG Approvals C A C A C A Stripping length Height (a with retaining bracket: EL-P5 Depth (b Width (c M M 8 mm (0. in. 8 mm (0. in. mm (0.47 in. 84 mm (.07 in. 75 mm (.95 in. 7 mm (.06 in. -5 C C (- F F 86 mm (.86 in mm (.09 in. 7 mm (.06 in. -5 C C (- F F The maximum electrical data is relay dependent. Details on request. Two spring-cage connections per terminal point. 84 mm (.07 in. 95 mm (.740 in. mm (.0 in. -5 C C (- F F * Spring-cage version is mm (.0 in. wide Phoenix Contact GmbH & Co. KG 85 Blomberg, Germany Phone Fax Local Contact: Phoenix Contact page of 5

2 PR Relay Base for Industrial DPDT or 4PDT Relays PR-B relay base, for REL-IR Industrial DPDT or 4PDT Relays, / level version, screw connections, optional connection of input/interference suppression module, for mounting on, including MP markers, pcs. per pack PR-BSC/4x 8 56 PR-B relay base, for REL-IR Industrial DPDT or 4PDT Relays, / level version, screw connections, optional connection of input/interference suppression module, for mounting on,including MP markers, pcs. per pack PR-BSC/4x PR-B relay base, for REL-IR Industrial DPDT or 4PDT Relays, / level version, spring-cage connections, optional connection of input/interference suppression module, for mounting on, including MP markers, pcs. per pack PR-BSP/4x Relay retaining bracket, with eject function and integrated device marking area (8 x 5 mm [0.5 x in.], suitable for PR relay base: For 5 mm (.78 in. high industrial relays EL-P Device marker: Suitable for PR-BSP, 6 x 5 mm (0.6 x 0.59 in. marking area Suitable for PR-BSC, 9 x 5 mm (0.54 x in. marking area MP MP Plug-in module, for mounting on PR and PR, with free-wheeling diode and yellow LED, polarity: A +, A - 4 V DC ±0% V DC ±0% V DC ±0% LDP--4DC LDP-48-60DC LDP-DC Plug-in module, for mounting on PR and PR, with free-wheeling diode and yellow LED, polarity: A, A + (Japanese standard - 4 V DC ±0% V DC ±0% V DC ±0% LDM--4DC LDM-48-60DC LDM-DC Plug-in module, for mounting on PR and PR, with varistor and yellow LED, input voltage: - 4 V AC/DC ±0% V AC/DC ±0% 0-0 V AC/ V DC ±0% LV--4UC LV-48-60UC LV-0-0AC/ DC (0 V varistor (75 V varistor (75 V varistor Plug-in module, for mounting on PR and PR, with varistor - 4 V AC/DC ±0% V AC/DC ±0% 0-0 V AC/DC ±0% V--4UC V-48-60UC V-0-0UC (0 V varistor (75 V varistor (75 V varistor Plug-in module, for mounting on PR and PR, with RC element - 4 V AC/DC ±0% V AC/DC ±0% 0-0 V AC/DC ±0% RC--4UC (0 nf/0 Ω RC-48-60UC (0 nf/0 Ω RC-0-0UC (0 nf/470 Ω Wire jumper, 50-pos., can be separated, maximum jumpering distance of 60 mm (.6 in., 0.5 mm (0 AWG, insulation: Blue Black Gray Might not be required, as LED and freewheeling diode are already integrated in the REL-IR/LD... relays. DB BU DB BK DB GY Phoenix Contact page of 5

3 Plug-In Industrial Relays With DPDT Contacts, Suitable for PR Relay Base Plug-in industrial relays with power LED, free-wheeling diode, mechanical switch setting display, polarity: A +, A V DC 4 V DC V DC REL-IR/LDP-DC/x REL-IR/LDP-4DC/x REL-IR/LDP-48DC/x REL-IR/LDP-DC/x Plug-in industrial relays with power LED, free-wheeling diode, mechanical switch setting display, polarity: A, A + (Japanese standard V DC 4 V DC V DC Plug-in industrial relays with power LED, mechanical switch setting display 4 V AC 0 V AC 0 V AC Representation without LED and free-wheeling diode. Contacts,, and 4 are led to relay base connections 4, 4, and 44. REL-IR/LDM-DC/x REL-IR/LDM-4DC/x REL-IR/LDM-48DC/x REL-IR/LDM-DC/x REL-IR/L-4AC/x REL-IR/L-0AC/x REL-IR/L-0AC/x Technical Data Coil Side DC Coils Typical input current at U N Typical response time at U N Typical release time at U N DC coil resistance at 0 C (68 F Coil Side AC Coils (50 Hz/60 Hz Typical input current at U N (50 Hz/60 Hz Typical response time at U N (depending on phase relation Typical release time at U N (depending on phase relation DC coil resistance at 0 C (68 F Contact Side Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power (ohmic load Minimum switching power General Data Test voltage: Nominal operating mode Mechanical service life Standards/specifications Winding/contact Contact/contact Approvals Mounting position/mounting Further voltage versions, lockable test key, etc. on request. 50 V AC V DC 4 V DC 48 V DC V DC 75 ma 8 ma 9 ma ma ms ms ms ms 5 ms 5 ms 5 ms 5 ms 60 Ω ±5% 60 Ω ±5% 560 Ω ±5% 0 Ω ±5% 4 V AC 0 V AC 0 V AC 54 ma/46 ma ma/9 ma 5 ma/4 ma 4 - ms 4 - ms 4 - ms - ms - ms - ms 80 Ω ±5% 440 Ω ±5% 8790 Ω ±5% REL-IR...x Single contact, PDT contacts Ag 50 V AC/5 V DC 5 V A 0 A (5 ms ma 500 VA For additional data, see diagram on page 5 5 mw kv, 50 Hz, minute kv, 50 Hz, minute -55 C to +70 C (-67 F to +58 F 0% ED 5 x 7 cycles IEC /IEC A/DIN VDE 0, degree of pollution, Surge Voltage Category II UL; CSA; VDE Any/can be mounted without spacing Phoenix Contact page of 5

4 Plug-In Industrial Relays With 4PDT Contacts, Suitable for PR Relay Base Plug-in industrial relays with power contacts, test key, status LED, freewheeling diode, mechanical switch setting display, polarity: A +, A V DC 4 V DC V DC Plug-in industrial relays with power contacts, test key, status LED, freewheeling diode, mechanical switch setting display, polarity: A, A + (Japanese standard V DC 4 V DC V DC Representation without LED and free-wheeling diode. REL-IR/LDP-DC/4xAU REL-IR/LDP-4DC/4xAU REL-IR/LDP-48DC/4xAU REL-IR/LDP-DC/4xAU REL-IR/LDM-DC/4xAU REL-IR/LDM-4DC/4xAU REL-IR/LDM-48DC/4xAU REL-IR/LDM-DC/4xAU Plug-in industrial relays with power contacts, test key, status LED, mechanical switch setting display 4 V AC 0 V AC 0 V AC REL-IR/L-4AC/4xAU REL-IR/L-0AC/4xAU REL-IR/L-0AC/4xAU Technical Data Coil Side DC Coils Typical input current at U N Typical response time at U N Typical release time at U N DC coil resistance at 0 C (68 F Coil Side AC Coils (50 Hz/60 Hz Typical input current at U N (50 Hz/60 Hz Typical response time at U N (depending on phase relation Typical release time at U N (depending on phase relation DC coil resistance at 0 C (68 F Contact Side Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power (ohmic load Minimum switching power General Data Test voltage: Nominal operating mode Mechanical service life Standards/specifications Winding/contact Contact/contact Approvals Mounting position/mounting Further voltage versions, lockable test key, etc. on request. 50 V AC V DC 4 V DC 48 V DC V DC 75 ma 8 ma 9 ma ma ms ms ms ms 5 ms 5 ms 5 ms 5 ms 60 Ω ±5% 60 Ω ±5% 560 Ω ±5% 0 Ω ±5% 4 V AC 0 V AC 0 V AC 54 ma/46 ma ma/9 ma 5 ma/4 ma 4 - ms 4 - ms 4 - ms - ms - ms - ms 80 Ω ±5% 440 Ω ±5% 8790 Ω ±5% REL-IR...4xAU Single contact, 4 PDT contacts AgNi + µ Au 50 V AC/5 V DC V 5 A A (5 ms ma 50 VA For additional data, see diagram on page 5 mw kv, 50 Hz, minute kv, 50 Hz, minute -55 C to +70 C (-67 F to +58 F 0% ED 5 x 7 cycles IEC /IEC A/DIN VDE 0, degree of pollution, Surge Voltage Category II UL; CSA; VDE Any/can be mounted without spacing Phoenix Contact page 4 of 5

5 Diagrams for REL-IR... Industrial Relays REL-IR...x (DPDT Contacts Operating voltage range T u = T coil Coil voltage U/U N & $ & $ $ % & [ C] Shutdown power AC, ohmic load AC, cos ϕ = 0.4 DC, ohmic load 4 DC, L/R = 7 ms 4 % Switching voltage [V] Cycles $ $ & 50 V AC, ohmic load 0 V DC, ohmic load REL-IR...4xAU (4PDT Contacts Operating voltage range T u = T coil Coil voltage U/U N & $ & $ $ % & [ C] Shutdown power % AC, ohmic load AC, cos ϕ = 0.4 DC, ohmic load 4 DC, L/R = 7 ms 4 Switching voltage [V] TNR: F 0/5/05 Phoenix Contact Cycles $ 50 V AC, ohmic load 0 V DC, ohmic load Phoenix Contact page 5 of 5