PR1 Relay Base for: Relays With SPDT or DPDT Contacts Solid-State Relays With the Same Structure

Transcription

1 PR Relay Base for: Relays With SPDT or DPDT Contacts Solid-State Relays With the Same Structure Universal Modular System The 5 mm (0.59 in.) wide PR relay base range is a modular system consisting of PR-B... relay bases, compact electromechanical relays with SPDT or DPDT contacts, solid-state relays, and a comprehensive range of accessories. These include: Plug-in input/interference suppression modules Relay retaining bracket with labeling field and eject function Labels Continuous jumpers Depending on the application, complete coupling relays can be created, which are optimized in terms of cost, function, and service life. a c Base Versions The relay bases are available in two versions with screw connections 3 ) - the flat / level PR-BSC and the logical /3 level PR-BSC3. The second version has coil and contact connections that are located opposite one another and thus meets the requirements of modern control cabinet concepts with clear isolation of control signals and load. Both bases can be extended in terms of functions through the use of keyed plug-in modules with various display and interference suppression elements. Cost-Effective Electromechanical Relays Powerful and cost-effective REL-MR electromechanical miniature power relays are recommended for standard applications. They are available in the following versions: With one 6 A PDT contact With two 8 A PDT contacts In all popular AC and DC coil voltages In power contact and gold contact versions Additional suitable standard and special relays (e.g., for lamp loads) are available on request 4 ). Alternative: Wear-Resistant Solid-State Relays In critical applications, electromechanical relays reach their maximum service life relatively quickly. This is why, as an alternative, PR-B... bases can be fitted with OPT wear-resistant solid-state relays with the same structure. These relays provide optimum service life for applications with a high switching frequency and/or for switching high DC loads. Nominal voltage U ) Nominal current I ) Conductor cross section Solid Flexible American Wire Gauge Connection type b PR-BSC V AC A x.5 mm x.5 mm x 4 AWG PR-BSC V AC A x.5 mm x.5 mm x 4 AWG Approvals ) C A C A Stripping length Height (a) with retaining bracket: EL-P6 EL-P5 Depth (b) Width (c) M 3 M 3 8 mm (0.3 in.) 8 mm (0.3 in.) 63 mm (.480 in.) 7 mm (.795 in.) 75 mm (.953 in.) 5.5 mm (0.6 in.) -5 C C (-3 F F) 66 mm (.598 in.) 79 mm (3. in.) 78.5 mm (3.09 in.) 5.5 mm (0.6 in.) -5 C C (-3 F F) ) The maximum electrical data is relay dependent. ) Details on request. 3 ) Spring-cage connections on request. 4 ) See INTERFACE catalog. Phoenix Contact GmbH & Co. KG 385 Blomberg, Germany Phone Fax Local Contact: Phoenix Contact page of 5

2 PR Relay Base for Miniature Power Relays With SPDT or DPDT Contacts PR relay base, for miniature power relays or miniature switching relays with SPDT or DPDT contacts or solid-state relays with a similar structure, / level version, screw connections, optional connection of input/ interference suppression module, for mounting on 3, safe isolation of I/Os, including MP markers, pcs. per pack PR relay base, for miniature power relays or miniature switching relays with SPDT or DPDT contacts or solid-state relays with a similar structure, /3 level version, screw connections, optional connection of input/ interference suppression module, for mounting on 3, safe isolation of I/Os, including MP markers, pcs. per pack Relay retaining bracket, with eject function and integrated device marking area (7.5 x 5 mm [0.95 x 0.59 in.]), suitable for PR relay base: For 6 mm (0.630 in.) high miniature power relays and solid-state relays ) For 5 mm (0.984 in.) high miniature switching relays ) and solid-state relays ) PR-BSC/x PR-BSC3/x EL-P6 EL-P Device marker, 6 x 5 mm (0.36 x 0.59 in.) marking area MP Plug-in module, for mounting on PR and PR, with free-wheeling diode and yellow LED, polarity: A +, A - 4 V DC ±0% V DC ±0% V DC ±0% ) ) LDP--4DC LDP-48-60DC LDP-DC Plug-in module, for mounting on PR and PR, with free-wheeling diode and yellow LED, polarity: A, A + (Japanese standard) -4 V DC ±0% V DC ±0% V DC ±0% LDM--4DC LDM-48-60DC LDM-DC Plug-in module, for mounting on PR and PR, with varistor and yellow LED, input voltage: - 4 V AC/DC ±0% V AC/DC ±0% 0-30 V AC/ V DC ±0% LV--4UC LV-48-60UC LV-0-30AC/ DC (30 V varistor) (75 V varistor) (75 V varistor) Plug-in module, for mounting on PR and PR, with varistor - 4 V AC/DC ±0% V AC/DC ±0% 0-30 V AC/DC ±0% V--4UC V-48-60UC V-0-30UC (30 V varistor) (75 V varistor) (75 V varistor) Plug-in module, for mounting on PR and PR, with RC element - 4 V AC/DC ±0% V AC/DC ±0% 0-30 V AC/DC ±0% RC--4UC (0 nf/0 Ω) RC-48-60UC (0 nf/0 Ω) RC-0-30UC (0 nf/470 Ω) Wire jumper, 50-pos., can be separated, maximum jumpering distance of 60 mm (.36 in.), 0.5 mm (0 AWG), insulation: Blue Black Gray DB BU DB BK DB GY ) See INTERFACE catalog Phoenix Contact page of 5

3 REL-MR Plug-In Miniature Power Relays ) With SPDT Contact, Suitable for PR Relay Base Plug-in miniature power relays, with power contact, SPDT contact, suitable for PR-B... base V DC 4 V DC V DC REL-MR- DC/HC REL-MR- 4DC/HC REL-MR- 60DC/HC REL-MR-DC/HC V AC 0 V AC 30 V AC A A 4 REL-MR- 4AC/HC REL-MR-0AC/HC REL-MR-30AC/HC As above, but with solid gold coating, SPDT contact V DC 4 V DC V DC Pin assignment: view of the connections. REL-MR- DC/HC AU REL-MR- 4DC/HC AU REL-MR-DC/HC AU V AC 0 V AC 30 V AC REL-MR- 4AC/HC AU REL-MR-0AC/HC AU REL-MR-30AC/HC AU Technical Data Coil Side DC Coils Permissible range Typical input current at U N Typical response time at U N Typical release time at U N DC coil resistance at 0 C (68 F) Coil Side AC Coils (50 Hz/60 Hz) Permissible range (with reference to U N ) Typical input current at U N (50 Hz/60 Hz) Typical response time at U N (depending on phase relation) Typical release time at U N (depending on phase relation) DC coil resistance at 0 C (68 F) Contact Side Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power (ohmic load) Minimum switching power General Data Test voltage: Winding/contact Nominal operating mode Mechanical service life Standards/specifications 50 V AC Approvals Mounting position/mounting ) Alternative: For REL/KSR miniature switching relay, OPT solid-state relay, see INTERFACE catalog. V DC 4 V DC 60 V DC V DC 33 ma 7 ma 8. ma 4. ma 7 ms 7 ms 7 ms 7 ms 3 ms 3 ms 3 ms 3 ms 360 Ω ±% 440 Ω ±% 7340 Ω 5+35% 6600 Ω 5+35% 4 V AC 0 V AC 30 V AC 3 ma/4 ma 7 ma/5 ma 3 ma/.5 ma 3 - ms 3 - ms 3 - ms - 9 ms - 9 ms - 9 ms 350 Ω ±% 80 Ω ±5% 3500 Ω ±5% REL-MR...HC REL-MR...HCAU Single contact, Form C contact Single contact, Form C contact AgNi AgNi + 5 µ Au ) 50 V AC/DC 30 V AC/36 V DC(50 V AC/DC) V 0 mv ( V) 6 A 50 ma (6 A) 30 A (300 ms) 50 ma (30 A, 300 ms) 0 ma ma (0 ma) 4000 VA (4000 VA) For additional data, see diagram on page 5. W 0 µw (. W) 5 kv, 50 Hz, minute -40 C to +85 C (-40 F to +85 F) 0% ED 3 x 7 cycles IEC 60 55/DIN VDE 0435 (in relevant parts), DIN EN 50 78/ VDE 060 (in relevant parts), EN /DIN VDE 063, IEC /IEC A/DIN VDE 0, degree of pollution 3, Surge Voltage Category III UL; CSA; VDE Any/can be mounted without spacing ) If the specified maximum values are exceeded, the gold coating will be damaged. In subsequent operation, the maximum values given in brackets will apply. This can then result in reduced service life, similar to simple power contacts. Phoenix Contact page 3 of 5

4 REL-MR Plug-In Miniature Power Relays ) With DPDT Contacts, Suitable for PR Relay Base Plug-in miniature power relays, with power contacts, DPDT contacts V DC 4 V DC V DC REL-MR- DC/- REL-MR- 4DC/- REL-MR- 60DC/- REL-MR-DC/ V AC 0 V AC 30 V AC A A 4 4 REL-MR- 4AC/- REL-MR-0AC/- REL-MR-30AC/ As above, but with solid gold coating, DPDT contacts V DC 4 V DC V DC Pin assignment: view of the connections. REL-MR- DC/- AU REL-MR- 4DC/- AU REL-MR- 60DC/- AU REL-MR-DC/- AU V AC 0 V AC 30 V AC REL-MR- 4AC/- AU REL-MR-0AC/- AU REL-MR-30AC/- AU Technical Data Coil Side DC Coils Permissible range Typical input current at U N Typical response time at U N Typical release time at U N DC coil resistance at 0 C (68 F) Coil Side AC Coils (50 Hz/60 Hz) Permissible range (with reference to U N ) Typical input current at U N (50 Hz/60 Hz) Typical response time at U N (depending on phase relation) Typical release time at U N (depending on phase relation) DC coil resistance at 0 C (68 F) Contact Side Contact type Contact material Maximum switching voltage Minimum switching voltage Limiting continuous current Maximum inrush current Minimum switching current Maximum shutdown power (ohmic load) Minimum switching power General Data Test voltage: Nominal operating mode Mechanical service life Standards/specifications Winding/contact Contact/contact Approvals Mounting position/mounting ) Alternative: For REL/KSR miniature switching relay, see INTERFACE catalog. 50 V AC V DC 4 V DC 60 V DC V DC 33 ma 7 ma 8. ma 4. ma 7 ms 7 ms 7 ms 7 ms 3 ms 3 ms 3 ms 3 ms 360 Ω ±% 440 Ω ±% 7340 Ω 5+35% 6600Ω -5+35% 4 V AC 0 V AC 30 V AC 3 ma/4 ma 7 ma/5 ma 3 ma/.5 ma 3 - ms 3 - ms 3 - ms - 9 ms - 9 ms - 9 ms 350 Ω ±% 80 Ω ±5% 3500 Ω ±5% REL-MR...- REL-MR...-AU Single contact, Form C contacts Single contact, Form C contacts AgNi AgNi + 5 µ Au ) 50 V AC/DC 30 V AC/36 V DC(50 V AC/DC) 5 V 0 mv (5 V) 8 A 50 ma (8 A) 5 A (300 ms) 50 ma (5 A, 300 ms) ma ma ( ma) 000 VA (000 VA) For additional data, see diagram on page 5 50 mw 0 µw (50 mw) 5 kv, 50 Hz, minute.5 kv, 50 Hz, minute -40 C to +85 C (-40 F to +85 F) 0% ED 3 x 7 cycles IEC 60 55/DIN VDE 0435 (in relevant parts), DIN EN 50 78/ VDE 060 (in relevant parts), EN /DIN VDE 063, IEC /IEC A/DIN VDE 0, degree of pollution 3, Surge Voltage Category III UL; CSA; VDE Any/can be mounted without spacing ) If the specified maximum values are exceeded, the gold coating will be damaged. In subsequent operation, the maximum values given in brackets will apply. This can then result in reduced service life, similar to simple power contacts. Phoenix Contact page 4 of 5

5 Diagrams for REL-MR... Miniature Power Relays REL-MR...HC... (SPDT Contact) Operating voltage range T u = T coil Coil voltage U/U N & & &! # % & ' [ C] Shutdown power #!! # %! Switching voltage [V] Cycles % 3 #! # % & '! # DC coils AC coils AC, ohmic load DC, ohmic load 3 DC, L/R = 40 ms 50 V AC, ohmic load (DC coils) 50 V AC, ohmic load (AC coils) Service life reduction factor with varying cos ϕ Reduction factor ' & % #! ' & % #! cos ϕ REL-MR (DPDT Contacts) Operating voltage range T u = T coil Coil voltage U/U N & & &! # % & ' [ C] Shutdown power #! 4! # %! Switching voltage [V] Cycles 3 # %! # % & '! # DC coils AC coils AC, ohmic load DC, ohmic load, contacts in series 3 DC, ohmic load 4 DC, L/R = 40 ms 50 V AC, ohmic load (DC coils) 50 V AC, ohmic load (AC coils) Service life reduction factor with varying cos ϕ Reduction factor ' & % #! ' & % #! cos ϕ TNR: GB /30/04 Phoenix Contact Phoenix Contact page 5 of 5