DGPS / Genset general description. > Soundproof genset with automatic startup, control card allows automatic, manual or signal start-up

Transcription

1 Measures: L : 2775 mm H : 1690 mm W: 1100 mm H Weight: 1800 kg W L Hz 50 Hz V 400/230 V Water cooled Diesel Illustrative image r.p.m Soundproof CE Conformity 1 / Genset general description GENERAL TECHNICAL DATA Engine Alternator STAMFORD UCI 274C Performance class G3 Frequency 50Hz Voltage 400 / 230 V Control panel DSE 6020 Fuel tank (L) 260 Noise level (dba@7m) 69 > Soundproof genset with automatic startup, control card allows automatic, manual or signal start-up POWER 1 PRP (kva / KW) 100 / 80 ESP (kva / KW) 110 / 88 Voltage (V) PRP (KVA/KW) ESP (KVA/KW) Amperage (A) 415/ /80 110/ / /80 110/ / /80 110/ / /80 110/ / /80 110/ / /80 110/ PRP: Continuous power ( Prime Power ) ISO standard. ESP: Emergency power ( Emergency Standby Power ) ISO standard.

2 2 /Engine specifications Engine general data Manufacturer / Model r.p.m > diesel engine, inline 4-cylinders, 4-stroke, turbocharged, electronically regulated by LCS system. Complying TIER 2 and EU Stage II emissions. Max. Power ESP (kva) 111,9 Power PRP (kva) 101,4 Fuel Diésel Number of cylinders 4 Engine capacity 4400 Compression ratio 18,23:1 Cooling system Regulation type Engine type / injection / suction type Liquid Electronic (LCS) Diesel / direct / turbocharged Fuel Fuel type Diesel Fuel tank capacity (L) / Fuel feed system > Direct injection system, fuel filter included that prevents the passage of particles, original parts from the engine manufacturer. Tablas de consumos % Load Consumption PRP Consumption ESP L/h Autonomy (h) L/h Autonomy (h) 50% 11, % 17,1 15,2 18,8 13,8 100% 22,6 11,5 24,9 10,4 Cooling system Fan airflow (m 3 /min) 165,6 Fan power consumption (kw) 1,5 Engine + radiator capacity (L) 12,6 2.2 / Cooling system > Cooling by fully distributed coolant in a closed circuit driven by a pump activated by the engine. Tropicalized radiator. Original parts from the engine manufacturer. Lubrication system Total oil capacity (L) / Lubrication system > Lubrication system driven by the crankshaft driven pump. Filter on top with full flow cartridge inserted, front crankcase. Original parts from the engine manufacturer. Air intake system Combustion air flow (m³/min) / Air intake system > Turbocharged air intake system including two-stage filter. Original parts from the engine manufacturer.

3 Electrical start system Number of batteries 1 Battery features 12V 60Ah Starting voltage (V) 12V 2.5 / Start system > Start system by electric motor, battery (without maintenance) with disconnector and charging alternator driven by the starter motor (3kW, 12V), original parts from the engine manufacturer. Exhaust system Exhaust gas flow (m³/min) 15,2 Exhaust gas temperature (ºC) / Exhaust system > Attenuation level -30dB(A). Complying TIER 2 and EU Stage II emissions. Exhaust external diameter (mm) 64 Max. exhaust backpressure (kpa) 18 3 /Alternator specifications Alternator General Data Brand/model STAMFORD UCI 274C No. poles 4 Insulation class H Number of wires 12 Mechanical protection degree IP23 Voltage regulator AVR SX460 Voltage regulator ±1,5% ESP power rating 27ºC (kva) 110 PRP power rating 40ºC (kva) 100 Number of phases 3 Power factor (cos φ) 0,8 Efficiency at 100% Load η (%) 90,3 Efficiency at 110% Load η (%) 89,8 > Alternator STAMFORD 4-poles, brushless, robust mechanical structure with easy access to connections and components, insulation class H, 12-wires, winding with 2/3 pitch and autoexcited AVR. Protection with Premium epoxy resins, high voltage parts are impregnated under vacuum allowing always an excellent insulation. The alternator complies with the following standards: - AS IEC BS EN VDE BS CAN/CSA-C NEMA MG1-32 Low wave distortion: - THD (100% load) = 2% - THF < 2% - Complying with EN , EN standards on radio interference.

4 4 / Bench specifications Genset mounted over an electro-welded bench made of high-strength steel, painted with electrostatic epoxy polyester powder paint. Union assembly to the bench by anti-vibration shock absorbers. Fuel tank located on the bench, provided with measuring gauge and fuel installation to the engine. Tested in saline mist chamber according to the ASTM B , 500h resistance. 5 / Canopy specifications Electro-welded canopy made of galvanized high-strength steel, painted with electrostatic powderbased epoxy-polyester paint. Interior soundproofing with acustical and fireproof isolating rock wool. Efficient residential exhaust -30dB(A) for the evacuation of gases to the outside with rain cap. Tested in saline mist chamber according to the ASTM B standard, 720h resistance. Mechanical protection degree IP44 6 / Control panel Including protection devices, distribution with DSE 6020 control card, that allows to operate in automatic, manual or by signal starting modes. 6.1 / Main elements of the control panel: - EMERGENCY STOP BUTTON. - DEEP SEA BATTERY CHARGER: Designed to be permanently connected to the battery and keep 100% of the load. The charger switches to float mode when the load is complete. - PROTECTIONS: 4-pole magnetothermic protection against overloads and shortcircuits. Protection fuses for the control assembly. Protection switch Manufacturer / model Schneider Easypact CVS160B+TM-G 160 4P 6.2 / Control card DSE 6020 DEEP SEA control card, with mains grid monitor. The genset will automatically start up when detecting a fault in the electric power network and it will turn off automatically as well, when the electrical supply is re-established. It can also work in manual mode and by signal. It allows you to monitor a wide range of generator parameters and display information alerts, status and alarms. The module includes USB communication ports, 4 configurable digital inputs, 3 analog inputs, 6 configurable outputs, emergency stop button, 8-35 V battery charger. It has 132x64p illuminated LCD display with 4 lines of text, 5-key navigation through menus, programmable clocks and alarms, reading and displaying parameter values, including RMS values. > The control card complies with the following environmental tests: - BS EN (electromagnetic compatibility) - BS EN (electromagnetic compatibility) - BS EN (electrical safety) - BS EN (Temperature) - BS EN (Vibration) - BS EN (Humidity) - BS EN (Shock) The entire module is easily configurable via PC using the DSE specific software configuration. Different operating modes: AUTOMATIC mode, MANUAL mode, SIGNAL mode and TEST mode. Other alternative configurations are available upon request to extend the capabilities of the operation modes.

5 Menu navigations Main status an instrumentation display Alarm indicator Transfer to mains (Manual mode only) Transfer to generator (Manual model only) Start engine (manual mode only) Stop genset Mute alarm Manual mode Test on load mode Select Auto mode / Allowing reading Engine Mains Alarm detected Turning speed Mains Voltage (L-N) Start-up failure Low fuel level Oil pressure Mains Voltage (L-L) High coolant temperature High/Low generator frequency Battery Voltage Mains Frequency Low oil pressure Overload Hours counter Over/low speed engine Charging alternator failure Coolant temperature High/low generator voltage Maintenance interval External emergency stop Generator Voltage generator (L-N) Generator frequency Power factor Voltage generator (L-L) Generator intensity Generator load (kw, kva, kwh, kvah) > Genset reponse to a fully configurable alarm via DSE software.

6 The genset can be provided with an automatic transfer, as an optional device Investor table IV poles (A) 10 kva kva 25 >The table below shows the different amperage rating of the magneto thermal switches and investors cabinets. - ATS by contactors: A - Motorized ATS: 125 A 25 kva kva kva kva kva 125 GENSET POWER 90 kva kva kva kva kva kva kva kva kva 800 Regulations ENVIRONMENTAL CONDITIONS ISO :2005 standard: 25ºC, 100kPa and 30% relative humidity: PRIME POWER (PRP): Electrical power data available at variable load for unlimited hours per year. A 10% overload is permissible for 1 hour every 12 hours according to ISO :2005. EMERGENCY STANDBY POWER (ESP): Electrical power data available at variable load in an emergency according to ISO :2005. The DAGARTECH genset has CE marking which includes the following directives: /42 Machinery safety /95/CE Electrical Safety /108/CE Electromagnetic compatibility /88/CE Noise emissions in the environment outdoors