SPECIAL PAINT. I-CanNano TM

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SPECIAL PAINT. I-CanNano TM"

Transcription

1 SPECIAL PAINT 210

2 Nano Anti-sticking Paints DESCRIPTION: It is a Nanotechnology based Nano Water base & Nano PU/Epoxy/Enamel paint of finest quality. It is durable, anti-graffiti and stain-resistant. The paint behaves as a water/dirt repellent paint for a wide variety of exterior and interior surfaces, especially in public buildings. BENEFITS: The benefits of the paint are varied. Resistance to sticking of bills on the surface, resistance to stains (e.g. betel spits etc.), resistance to abrasion, easy clean, water/dirt repulsion, washability, low maintenance, outstanding adhesion due to very high surface area of nano-materials for which it gets embedded in the surface (not a film like), high resistance to weathering (UV, Fungus, water etc.) and blistering, low/zero VOC, easy application, quick drying, thermal insulation are the benefits of the paint in a nutshell. It is a Nano Water Base Paint. It boasts of robust performance due to inorganic, structurally defect-free nanoparticles, incorporated in the paint matrix. SUITABLE FOR: Interior / Exterior Nano Water Base Nano PU Base (Clear Coat) TYPE: Nano Water base and Nano PU/Epoxy/Enamel Base Paint COLORS AVAILABLE: For Nano Water Base, color of base is white. The base material may be tinted with universal colorants to a full range of custom colors. I-CanNano has 250+ standard color shades and also metallic finishes. Most other color shades can easily be manufactured and hence provided. For Nano PU/Epoxy/Enamel Base RAL colors, metallic finish and transparent finish available. PRACTICAL COVERAGE: Practical coverage is of sq. ft. per kg anti-graffiti finish, sq. ft./kg for primer & other finish depending on the porosity of the substrate. LIMITATIONS: Not recommended for floors or decks. SURFACES: Nano Water Base can be applied to plaster, drywall, concrete, cement fiber boards, hardboards, gypsum boards and masonry surfaces. Nano PU/Epoxy/Enamel Base can effectively be applied to Mild Steel, Stainless Steel, Aluminum, Wood etc. surfaces. SURFACE PREPARATION: Nano Water Base - Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with I-CanNano water base nano crack filler for best results. All patch work should be spot primed with I-CanNano nano primer. Glossy, glazed or dense surfaces must be dulled. Nano PU/Epoxy/Enamel Base - Emery paper must be used to remove rusts, if any. I- CanNano rust cleaner must be used to remove rusts completely. I-Can nano Epoxy/PU/Enamel primer is recommended for use in order to achieve best results. 211

3 NEW WORK: Nano Water Base - For maximum durability of exterior application, prime new plaster, drywall, hardboard siding, cement boards and masonry, with I-CanNano Primer and for interior application use I-CanNano water base nano wall putty (filler) & prime. Apply antigraffiti finish with application of brush and after drying apply anti-sticking top-coat finish. Nano PU/Epoxy/Enamel Base - I-Can nano Primer should be applied. On new metallic surface, one coat nano primer, 2 coats of color finish, clear coat anti-graffiti/anti-sticking rough finish should be used. REFINISH WORK: Nano Water Base - Conditions listed above should be strictly followed. Previously painted, glossy surfaces should be lightly sanded. Cracks should be filled with I- CanNano water base crack filler for best results. All patched areas should be spot primed with water base nano primer. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed. Nano PU/Epoxy/Enamel Base - Previously painted, glossy surfaces should be lightly sanded and special thinner must be used to remove rusts completely. I-CanNano rust removing chemical and paint peeler chemical for removal of rusts & existing paints should be used. I-Can nano primer must be used and all primers should be allowed to dry thoroughly before application of finish coats. SURFACE TEMPERATURE: For best results, ambient temperature is preferred. Frost, fog, or damp conditions must be avoided. APPLICATION: Paint must be stirred well before use.brush is recommended for application of the paint. Nano Water Base -One coat primer, one coat anti-graffiti finish and one antisticking top-coat finish should be applied. Nano PU/Epoxy/Enamel Base One coat primer, one coat of color finish and anti-graffiti/anti-sticking top-coat finish must be applied. THINNING: Formulated for use at package consistency. Thinning is required for roller application. Only clean water (300 ml) must be used for Nano Water Base. Special thinner for Nano PU/Epoxy/Enamel Base is recommended for use. DRYING TIME: Nano Water Base dries naturally dust free in 4 hours. Recoating should be done only after 4 hours. Nano PU/Epoxy/Enamel Base dries naturally, data sheet must be referred for further details. Drying time may vary depending on temperature and humidity. 212

4 DATA SHEET Nano PU/Epoxy/Enamel Base Anti-graffiti/anti-sticking Finish Type PU/Epoxy based air drying 2-pack system Enamel Base 1-pack system Coverage a) Spray 50 sq.ft/liter ---- Mixed Ratio As specified on container Drying Time Surface Dry 1 hr Tack Dry 3-4 hrs Hard Dry 3 days Viscosity o C Minimum recoat time 4 hrs Sp. Gravity 1.33 Temperature resistance 150 o C % of solid contain by volume 66.5% Salt Spray hrs Pot life 18hrs Humidity 1000+hrs Hot pot stability Pass IS UV Stability 400+ hrs Flash point Pass IS Gloss Semi gloss/matt Method of application Brush/Spray Scratch Resistance 3 kg + Application temperature o C Impact Resistance Direct Indirect Application Viscosity Acid Resistance Passed IS+ a) Spray o C ---- Dry film thickness Alkali Resistance Passed IS+ a) Spray 30μ ---- CLEAN UP: Application equipment must be cleaned with soap/water/thinner. STORAGE: Paint should be stored in a cool & dry place. PACKING: 1/5/25 Liters 213

5 Nano Water based Anti-graffiti Paint I-CanNano TM DESCRIPTION: It is a Nanotechnology based Nano Water base paint of finest quality. It is durable, anti-graffiti and stain-resistant. The paint behaves as a water/dirt repellent paint for a wide variety of exterior and interior surfaces, especially in public buildings. BENEFITS: The benefits of the paint are varied. Resistance to sticking of bills on the surface, resistance to stains (e.g. betel spits etc.), resistance to abrasion, easy clean, water/dirt repulsion, washability, low maintenance, outstanding adhesion due to very high surface area of nano-materials for which it gets embedded in the surface (not a film like), high resistance to weathering (UV, Fungus, water etc.) and blistering, low/zero VOC, easy application, quick drying, thermal insulation are the benefits of the paint in a nutshell. It is a Nano Water Base Paint. It boasts of robust performance due to inorganic, structurally defect-free nanoparticles, incorporated in the paint matrix. SUITABLE FOR: Interior / Exterior plaster surfaces, gypsum board TYPE: Nano Water base Anti graffiti Paint COLORS AVAILABLE: Color of base is white. The base material may be tinted with universal colorants to a full range of custom colors. I-CanNano has 250+ standard color shades and also metallic finishes. Most other color shades can easily be manufactured and hence provided. PRACTICAL COVERAGE: Practical coverage is of sq. ft. per liter anti-graffiti finish, LIMITATIONS: Not recommended for floors or decks. SURFACES: It can be applied to plaster, drywall, concrete, cement fiber boards, hardboards, gypsum boards and masonry surfaces. SURFACE PREPARATION: Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Cracks and other holes should be repaired with I- CanNano water base nano crack filler for best results. All patch work should be spot primed with I-CanNano nano primer. Glossy, glazed or dense surfaces must be dulled. NEW WORK: For maximum durability of exterior application, prime new plaster, drywall, hardboard siding, cement boards and masonry, with I-CanNano Primer and for interior application use I-CanNano water base nano wall putty (filler) & prime. Apply anti-graffiti finish with application of brush and after drying apply anti-sticking top-coat finish. REFINISH WORK: Conditions listed above should be strictly followed. Previously painted, glossy surfaces should be lightly sanded. Cracks should be filled with I-CanNano water base crack filler for best results. All patched areas should be spot primed with water base nano primer. All primers should be allowed to dry thoroughly before application of finish coats. Chalky surfaces should be thoroughly washed. SURFACE TEMPERATURE: For best results, ambient temperature is preferred. Frost, fog, or damp conditions must be avoided. APPLICATION: Paint must be stirred well before use.brush is recommended for application of the paint. One coat primer, one coat anti-graffiti finish and one anti-sticking top-coat finish should be applied. THINNING: Formulated for use at package consistency. Thinning is required for roller application. Only clean water (300 ml) must be used for Nano Water Base. DRYING TIME: It dries naturally dust free in 4 hours. Recoating should be done only after 4 hours. 214

6 Nano Water Base Metallic Finish Paint I-CanNano TM DESCRIPTION: Nanotechnology based water base, anti-corrosive paints of finest quality are durable, UV resistant, high scratch/ impact resistant, bacteria resistant, and hence provide finish for a wide variety of metallic surfaces. BENEFITS: Outstanding adhesion, high anti-corrosive (1000+ hrs salt spray), resistance to weathering (UV, Fungus, water etc.) and blistering, impact & scratch resistance,, low VOC are only a few of the benefits that these paints provide. They provide high coverage of area with a desirable ease of application. Robust performance due to inorganic, structurally defect-free nano-particles, incorporated in the paint matrix gives these paints an edge over other paints being used. FINISH/USAGE: Mild Steel, CI, DI, Aluminium, SS surfaces TYPE: Water Base Metallic finish paint COLORS AVAILABLE: Any desired shade. PRACTICAL COVERAGE: square feet per liter, depending on the porosity of the substrate. SURFACES: Mild Steel, CI, DI, Aluminium, SS surfaces SURFACE PREPARATION: Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Emery paper must be used to remove rusts, if any. To remove rusts completely use of Special Thinner is mandatory. NEW WORK: On new metallic surface, one coat finish must be used. REFINISH WORK: Conditions listed above should be strictly followed. Previously painted, glossy surfaces should be lightly sanded and special thinner must be used to remove rusts completely. Only one coat finish needs to be applied. SURFACE TEMPERATURE: For best results, ambient temperature is preferred. Frost, fog, or damp conditions must be avoided in order to achieve best results. APPLICATION: The paint should be stirred well before use. Spray or brush for application of paint is recommended. THINNING: Formulated for use at package consistency. Thinning is required for brush/spray application. DRYING TIME: Air drying at ambient temperature is recommended. 215

7 DATA SHEET I-CanNano TM Type Water Base metallic finish Viscosity 170 o C Sp. Gravity % of solid contain by volume 65-67% Hot pot stability Pass IS Flash point Pass IS Method of application Brush/Spray Application temperature o C Application Viscosity zz) Brush aaa) Spray o C o C Dry film thickness 30 μ μ Coverage sq ft/liter 90 sq ft/liter Drying Time 20 min Temperature resistance 700 o C Salt Spray hrs Humidity 1000+hrs UV Stability 400+ hrs Gloss Gloss/semi gloss Scratch Resistance 3 kg + Impact Resistance Direct Indirect Acid Resistance Passed IS+ Alkali Resistance Passed IS+ CLEAN UP: Application equipments must be thoroughly cleaned with solvent. STORAGE: Paint should be stored in a cool & dry place. PACKING: 1/4/20 liter 216

8 Nano Pollutant Absorbent Paint BENEFIT: Outstanding adhesion, high anti-corrosion (1000 to 4500 hours of salt spray), thermally conducting, pollutant adsorbent (SOX,NOX,COX) in particulate form, resistance to weathering (UV, Fungus, water etc.) and blistering, impact & scratch resistance, high thermal stability, low VOC, high coverage area with a desirable ease of application characterize this paint. Robust performance due to patented porous honeycomb pollutant adsorbent nano-structure incorporated in the paint matrix; enhance the utility of the paint. APPLICATION: Application of one coat primer and one coat finish is advisable. Use of spray or brush is recommended for application of the paint. SURFACES: Mild Steel, CI, DI, Aluminium, SS, plaster surfaces PRACTICAL COVERAGE: square feet per liter approx. TYPES: Epoxy/Alkyd based. USAGE: Exhaust Pipes, Road tunnels, generator rooms etc. CLEAN UP: Application equipment should be cleaned with solvent. STORAGE: Paint should be stored in a cool & dry place. PACKING: 1/ 5/25 liters 217

9 DATA SHEET I-CanNano TM Sl. No Properties Alkyd Base Epoxy Base 1 Type Alkyd based air drying one pack system Epoxy based air drying two pack system 2:1 2 Viscosity o C o C 3 Sp. Gravity % of solid contain by volume 39% 66.5% 5 Pot life 1 year 18hrs 7 Hot pot stability Pass IS Pass IS 8 Flash point Above 38 o C Pass IS 9 Method of application Brush/Spray Brush/Spray 10 Application temperature o C o C 11 Application Viscosity bbb) Brush ccc) Spray 12 Dry film thickness 13 Coverage As such o C 25μ 30 μ sq ft/kg 100 sq ft/kg o C o C 30μ μ sq ft/kg 100 sq ft/kg 14 Drying Time Surface Dry 2 hrs 1 hr Tack Dry 1 day 3-4 hrs Hard Dry 3 days 3 days 15 Minimum recoat time 1 day 6 hrs 16 Temperature resistance 150 o C 150 o C+ 17 Salt Spray hrs hrs 18 Humidity 1000+hrs 1000+hrs 19 UV Stability 400+ hrs 400+ hrs 20 Gloss Matt Semi gloss 21 Scratch Resistance 3 kg + 3 kg + 22 Impact Resistance Direct Indirect 23 Acid Resistance Passed IS+ Passed IS+ 24 Alkali Resistance Passed IS+ Passed IS+ 218

10 Nano Soundproof Paint DESCRIPTION: Nanotechnology based soundproof paints of finest quality are durable, UV resistant, high scratch/ impact resistant, bacteria resistant, thermally stable and hence can be used as primer & finish for a wide variety of metallic surfaces. BENEFITS: Outstanding adhesion, high anti-corrosive ability, resistance to weathering (UV, Fungus, water etc.) and blistering, impact & scratch resistance, sound proof, high thermal stability, high coverage area with a desirable ease of application, characterize this paint. This paint provides robust performance due to inorganic, structurally defect-free nanoparticles, incorporated in the paint matrix. TYPE: Nano Sound Proof paint COLORS AVAILABLE: Grey, black, white PRACTICAL COVERAGE: square feet per liter approx., depending on the porosity of the substrate. SURFACES: Mild Steel, CI, DI, Aluminium, SS surfaces SURFACE PREPARATION: Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Emery paper should be used to remove rusts, if any. Special thinner should be used to remove rusts completely. NEW WORK: For maximum durability, application of only one coat Primer is advisable. On new metallic surface, use of one coat nano primer & two coats finish is recommended. REFINISH WORK: Conditions listed above should be strictly followed. Previously painted, glossy surfaces should be lightly sanded.use of I-CanNano Rust Remover is recommended to remove rusts completely. I-Can nano primer should be used. All primers should be allowed to dry thoroughly before application of finish coats. SURFACE TEMPERATURE: For best results, ambient temperature is preferred. Frost, fog, or damp conditions should be avoided. APPLICATION: Paint should be stirred well before use. Spray or brush should be used for application of the paint. THINNING: Formulated for use at package consistency. Thinning is required for brush/spray application. Use of only special thinner in accordance with the technical data sheet is recommended. DRYING TIME: Stove drying at 200 Deg C temperature for 20 min is recommended. Air drying is also possible. CLEAN UP: Application equipment should be cleaned with solvent. STORAGE: Paint should be stored in a cool & dry place. PACKING: 1/5/25 liter 219

11 DATA SHEET I-CanNano TM Type Stove drying one pack system Viscosity High Sp. Gravity 1.26 % of solid contain by volume 36-42% Shelf life 6 months Hot pot stability Pass IS+ Flash point Pass IS+ Method of application Brush Application temperature o C Application Viscosity ddd) Brush eee) Spray o C o C Dry film thickness Coverage 30μ μ sq ft/liter sq ft/liter Drying Time (Stoving at 200 Deg C) 20 min. Minimum recoat time 8 hrs Temperature resistance 400 o C+ Salt Spray hrs Humidity 1000+hrs UV Stability 400+ hrs Gloss Matt gloss Scratch Resistance 3 kg+ Impact Resistance Direct Indirect Acid Resistance Passed IS + Alkali Resistance Passed IS + 220

12 Nano Thermal & Electrical Insulating Paints I-CanNano TM DESCRIPTION: Nanotechnology based thermal insulating anti-corrosive paints of finest quality are durable, UV resistant, high scratch/ impact resistant, bacteria resistant, electrical shock resistant and hence can be used as finish for a wide variety of metallic surfaces. BENEFITS: Outstanding adhesion, high anti-corrosive (2000+ hrs salt spray) property, resistance to weathering (UV, Fungus, water etc.) and blistering, impact & scratch resistance, thermal insulation of upto 600 o C-750 o C, electrical insulation (up to 2000 Volts) high coverage area with desirable ease of application characterize this paint. Robust performance due to inorganic structurally defect-free nano-particles, incorporated in the paint matrix, add to the utility value of the paint. SUITABLE FOR: metal surfaces FINISH/USAGE: Mild Steel, CI, DI, Aluminium, SS surfaces TYPE: Nano high temperature resistant paint COLORS AVAILABLE: Silver Aluminum available. PRACTICAL COVERAGE: 90 square feet per liter, depending on the porosity of the substrate. SURFACES: Mild Steel, CI, DI, Aluminium, SS surfaces SURFACE PREPARATION: Surface must be clean, dry, free of wax, grease, oil, loose or peeling paint, and other foreign materials. Emery paper should be used to remove rusts, if any. Use of special thinner is advisable to remove rusts completely. NEW WORK: On new metallic surface, two coats finish should be used. REFINISH WORK: Conditions listed above should be strictly followed. Previously painted, glossy surfaces should be lightly sanded and special thinner should be used to remove rusts completely. Application of one coat finish is recommended. SURFACE TEMPERATURE: For best results, ambient temperature is preferred. Frost, fog, or damp conditions should be avoided. APPLICATION: Paint should be stirred well before use. Use of spray or brush for application of paint is recommended. THINNING: Formulated for use at package consistency. Thinning is required for brush/spray application. Use of only special thinner in accordance with the technical data sheet is advisable. DRYING TIME: Stove drying at 230 Deg C temperatures for 20 min is recommended. Air drying at ambient temperature is also permissible. 221

13 DATA SHEET I-CanNano TM Type Thermal & Electrical Insulating Paints Viscosity 170 o C Sp. Gravity % of solid contain by volume 65 67% Hot pot stability Pass IS Flash point Pass IS Method of application Brush/Spray Application temperature o C Application Viscosity fff) Brush ggg) Spray o C o C Dry film thickness 30 μ μ Coverage 90 sq ft/liter 90 sq ft/liter Drying Time (stove drying 230 Deg C) 20 min. Temperature resistance 600 o C Salt Spray hrs Humidity 1000+hrs UV Stability 400+ hrs Gloss Matt Scratch Resistance 3 kg + Impact Resistance Direct Indirect Acid Resistance Passed IS+ Alkali Resistance Passed IS+ Fire Resistance 1+ hr. CLEAN UP: Application equipment should be cleaned with solvent. STORAGE: Paint should be stored in a cool & dry place. PACKING: 1/5/20 liters 222

14 Nano Thermal Conducting Paint DESCRIPTION: Nanotechnology based Heat Conductive Paint is a complete Epoxy based material that is durable, water repellent, crack resistant, UV resistant, fungus/ algae/ bacteria resistant and high heat conductive. BENEFITS: Outstanding adhesion by virtue of which it gets embedded in the surface, it makes surface smooth & impact resistant, outstanding heat conduction, resistance to water, anti-bacterial property is what makes this paint perfectly tailored for use on metal surfaces. Nano-materials have been used for smooth application & high coverage. Being oil-free (dry/wet) in nature release of oil due to dampness and peel-off of paint on the surface is unlikely to happen. It contains flexible nano-materials, that can resist crack formation and hence it is an excellent crack filler material. FINISH/USAGE: Any Metal Surface, Wood Surface TYPE: Heat Conductive Paint in liquid form. COLORS AVAILABLE: White, any color. PRACTICAL COVERAGE: Practical coverage of 70 square feet per liter (approximately) may vary with respect to thick coating depending on roughness, leveling of surface and porosity of the substrate. SURFACES: Any Metal Surface SURFACE PREPARATION: Surface must be clean, dry, and free of wax, grease, oil, loose or peeling paint, and other foreign materials. Metal panels and emery paper should be used to remove undulations on the surface and loose dust particles. In case surface is still loose, application of I-CanNano Heat Conductive Paint to firm up the loose dusts is recommended. In case of cracks on surface, the cracks should be opened up a little and then these cracks together with other dents / holes should be filled with nano Heat Conductive Paint for best results. In case of salt formation on surface, I-CanNano salt arresting chemical (solvent base) must be applied on primed surfaces before application on any Wood or Metal Surface. NEW WORK: For maximum durability and smooth surface finish, double coat of Heat Conductive Paint should be used. REFINISH WORK: Conditions listed above should be strictly followed. Previously painted, glossy surfaces should be lightly sanded. Cracks should be filled with I-CanNano Epoxy base Expansion joint Sealant for best results. Chalky surfaces should be thoroughly washed. SURFACE TEMPERATURE: For best results, ambient temperature is preferred. Frost, fog, or damp conditions should be avoided for best results. APPLICATION: Special Thinner should be mixed with Epoxy base Heat Conductive Paint before use, if necessary. The paint should be applied immediately to avoid drying up of the same. Use of brush for application of Paint on Wood or Metal surface is strongly recommended. THINNING: If necessary, thinner should be mixed with Epoxy base Heat Conductive Paint. If required, the paint can be thinned further by the application of Thinner. 223

15 DRYING TIME: Dries naturally in 24 hours. After drying of Heat Conductive Paint and before application of Heat Conductive Paint, Emery paper must be used to remove unevenness of surface, if any. CLEAN UP: Application equipment must be thoroughly cleaned with Thinner. STORAGE: Paint should be stored in a cool & dry place. PACKING: 1/5/25 liters DATA SHEET Sl. No Properties Result 1 Type Epoxy based air drying one pack system 3 Viscosity o C 4 Sp. Gravity % of solid contain by volume 50-54% 6 Thinning Ratio Mix Thinner to form brushable liquid 7 Flash point Pass IS 8 Method of application By Brush Or Conventional Spray 9 Application temperature o C 10 Application Viscosity o C 11 Dry film thickness 50μ 12 Coverage 70 sq ft/liter 13 Drying Time Surface Dry 2 hrs Tack Dry 1 day Hard Dry 3 days 14 Minimum recoat time 1 day 15 UV Stability 400+ hrs 16 Gloss Glossy 17 Scratch Resistance 2 kg+ 224

PUTTY & POWDER. I-CanNano TM

PUTTY & POWDER. I-CanNano TM PUTTY & POWDER 17 18 Nano Wall Putty DESCRIPTION: Nanotechnology based Nano Filler (Wall Putty) is complete water based material that is durable, water repellent, crack resistant, UV resistant, fungus/

More information

Epotec Primer Surfacer

Epotec Primer Surfacer Product Data 408 Epotec Primer Surfacer PRODUCTS Epotec Primer Surfacer Epotec Primer Hardener Thinners 408-Pack A 414-9105 Pack B R202-Normal conditions, R270-Hot conditions Product Description A polyamide

More information

PPG HI-TEMP 1027 PRODUCT DATA SHEET. June 30, 2014 Revision of January 28, 2014 DESCRIPTION

PPG HI-TEMP 1027 PRODUCT DATA SHEET. June 30, 2014 Revision of January 28, 2014 DESCRIPTION DESCRIPTION One component, high-build heat-resistant inert multipolymeric matrix coating to prevent corrosion under insulation (CUI) of carbon and stainless steel to temperatures ranging up to 650 C (1200

More information

DOCUMENT AP-D121 APAS SPECIFICATION BY KEY WORD. roof 1720/2 Encapsulation system for asbestos cement sheeting (5yr life)

DOCUMENT AP-D121 APAS SPECIFICATION BY KEY WORD. roof 1720/2 Encapsulation system for asbestos cement sheeting (5yr life) Materials Science & Engineering Div. Highett, Victoria, Australia +61 3 9252 6000 DOCUMENT AP-D121 APAS SPECIFICATION BY KEY WORD Editorial Note: This version of the document is in the new format and reflects

More information

1. Concrete. 2. Steel. 3. Galvanized metal. 4. Aluminum (not anodized or otherwise coated). 5. Wood. 6. Gypsum board.

1. Concrete. 2. Steel. 3. Galvanized metal. 4. Aluminum (not anodized or otherwise coated). 5. Wood. 6. Gypsum board. SECTION 099123 - INTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Walls Low sheen: They are cleaned more often but are susceptible to critical lighting.

Walls Low sheen: They are cleaned more often but are susceptible to critical lighting. Stage 3: Fixing/Pre-Paint Stage Information on Painting The First Coat of Paint is the Most Important Most project homes are specified with a 2 coat finish. Master Painters of Australia recommends 3 coats,

More information

TECHNICAL DATA SHEET & PROCESS GUIDE

TECHNICAL DATA SHEET & PROCESS GUIDE U-POL s RAPTOR Truck Bed Liner is a durable 2K urethane coating that provides surfaces with a protective barrier. RAPTOR Tintable Truck Bed Liner is also available. One Kit of RAPTOR includes: 4 x 750ml

More information

RAPTOR TRUCK BED LINER - BLACK

RAPTOR TRUCK BED LINER - BLACK 4 x 750ml RAPTOR base coating x L RAPTOR hardener TECHNICAL DATA SHEET & U-POL s RAPTOR Truck Bed Liner is a durable K polyurethane coating that provides surfaces with a protective barrier. RAPTOR Tintable

More information

Imron Industrial Strength Low VOC Polyurethane Primer

Imron Industrial Strength Low VOC Polyurethane Primer Imron Industrial Strength Low VOC Polyurethane Primer Product Data Sheet Description: DuPont Imron Industrial Strength is the next generation of Imron technology. Based upon unique DuPont formulations

More information

INDUSTRIAL PRIMERS CORROSION PROTECTION PRIMER HK - BB - 011

INDUSTRIAL PRIMERS CORROSION PROTECTION PRIMER HK - BB - 011 INDUSTRIAL COATINGS INDUSTRIAL PRIMERS CORROSION PROTECTION PRIMER HK - BB - 011 It is designed to protect structures and equipment of ferrous metals operating in conditions of severe atmospheric corrosion

More information

High-pressure (3000 p.s.i.) power washer with turbo tip. Condensation test material: Several one-foot square transparent pieces of plastic Duct tape

High-pressure (3000 p.s.i.) power washer with turbo tip. Condensation test material: Several one-foot square transparent pieces of plastic Duct tape Application Guide Type EP Epoxy Overview Supplies Needed Ramuc Type EP Epoxy offers a hard, tough, durable finish, providing stain, chemical, and abrasion resistance for protection of concrete, plaster,

More information

( II ) INDUSTRIAL & PROTECTIVE SYSTEM

( II ) INDUSTRIAL & PROTECTIVE SYSTEM ( II ) INDUSTRIAL & PROTECTIVE SYSTEM (A) ALKYD BASE QUICK PAINT AUTO GLOSS PAINT GLOSS PAINT VARNISH TOP WOOD VARNISH ALUMINUM TOP RED OXIDE ZINC CHROMATE PRIMER RED OXIDE PRIMER AUTO GLOSS ZINC CHROMATE

More information

Alumigrip 4200 Application Process Instruction

Alumigrip 4200 Application Process Instruction Application Procedure Characteristics Product Information is a 3-component high solid durable polyurethane topcoat that provides premium gloss and distinctness of image (DOI) designed to meet and exceed

More information

WOOD Paints. Unleash your Imagination

WOOD Paints. Unleash your Imagination دهانات األخشاب WOOD PAINTS WOOD Paints Unleash your Imagination MIDO HEADQUARTERS : New Borg El-Arab city, 2nd Industrial Zone Alexandria, Egypt. Tel.: +203 4593 555 Fax: +203 4592 655 contact@midoco.com

More information

SC2000 CEMENT BONDING PROCEDURES

SC2000 CEMENT BONDING PROCEDURES Pg.1 SC2000 CEMENT BONDING PROCEDURES Widely recognized as the world s finest cold vulcanizing cement REMA SC2000 is the solution to your industrial bonding problems. By using REMA UTR20 hardener with

More information

Epoxy/Urethane Concrete Coating System

Epoxy/Urethane Concrete Coating System Epoxy/Urethane Concrete Coating System Application Guide Endura offers a coating system for concrete floors consisting of an epoxy primer and a urethane topcoat. It can be used on garage, warehouse and

More information

PRODUCT DATA SHEET DESCRIPTION:

PRODUCT DATA SHEET DESCRIPTION: DESCRIPTION: is a range of surface coatings based on State of the Art epoxy chemistry. is similar to SP-2888 R.G. but has high temperature operating capability. The cathodic disbonding resistance of is

More information

SC4000 CEMENT BONDING PROCEDURES

SC4000 CEMENT BONDING PROCEDURES Pg.1 SC4000 CEMENT BONDING PROCEDURES The REMA TIP TOP SC4000 Bonding System is free of chlorinated hydrocarbons (CFC), and consists of the following products: REMA TIP TOP Cement SC4000 + E40 Hardener

More information

Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.)

Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Saint Gobain Gyproc India Ltd. (Formerly India Gypsum Ltd.) Gyproc Plasters The cracks in cement sand plaster are an inherent feature which cannot be completely prevented but can only be controlled and

More information

LIFETM. "14" Series High Solids Epoxy Concrete Sealer. Product Specifications

LIFETM. 14 Series High Solids Epoxy Concrete Sealer. Product Specifications LIFETM Product Specifications "14" Series High Solids Epoxy Concrete Sealer Description: A premium quality 2-part water base epoxy concrete sealer that provides epoxy toughness, chemical resistance and

More information

Product Information/Specifications

Product Information/Specifications BARN & FENCE PAINT NO. 25 BARN RED Smooth or rough sawn exterior vertical wood surfaces such as plywood, fences, shingles, shakes, siding. laminates, masonry and stucco surfaces. AVAILABLE IN: Gallon Only

More information

INDEPENDENTS AIL RET 2012

INDEPENDENTS AIL RET 2012 RETAIL INDEPENDENTS 2012 Contents Introducing 2 new colours to the Hammerite range: Direct To Rust Metal Paint 4-5 Metalcare - Task Specific Products 6-7 Metalcare - Primers & Converters 8-9 Muted Clay

More information

Overview. Prior Repairs. Gaps in Panels. Turned Bolts. Paint/Body Defects 2

Overview. Prior Repairs. Gaps in Panels. Turned Bolts. Paint/Body Defects 2 Overview 0 Paint & Body Defects is one of the 3 most consistent indicators when inspecting for prior repairs that could ultimately indicate structural repairs, existing damage or alterations. 0 Use this

More information

2.2 APPLICATION: Apply one or two coats by spray, brush or roller.

2.2 APPLICATION: Apply one or two coats by spray, brush or roller. TECHNICAL DATA SHEET 1. IDENTIFICATION OF PRODUCT AND COMPANY 1.1 Product name : BLACK JACK Water based rust converter / primer 1.2 Company : MOMAR, Div of CANSA (Pty) Ltd, 8 Induland Crescent, Lansdowne,

More information

WHAT S ON THE MARKET?

WHAT S ON THE MARKET? extension.usu.edu Smart Shopping for Home Furnishings Selecting Paint Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 13 Shopping for paint? When shopping for paint, you will find many different

More information

Contract drawings, Division 0, Conditions of the Contract, and Division1, General Requirements, apply to the Work of this Section

Contract drawings, Division 0, Conditions of the Contract, and Division1, General Requirements, apply to the Work of this Section SECTION 09900 - PAINTING Contract drawings, Division 0, Conditions of the Contract, and Division1, General Requirements, apply to the Work of this Section PART 1 - GENERAL 1.1 SUMMARY A. Provide materials,

More information

Acrylic Enamel Topcoat

Acrylic Enamel Topcoat Acrylic Enamel Topcoat ACRYL-GLO TECHNICAL DATA SHEET The ACRYL-GLO single-stage acrylic enamel paint system provides a durable finish that is easy to apply and suitable for both commercial and passenger

More information

Metalshield PRODUCT GUIDE COMPLETE METAL PROTECTION. Worth doing, worth Dulux.

Metalshield PRODUCT GUIDE COMPLETE METAL PROTECTION. Worth doing, worth Dulux. I N D U S T R I A L Metalshield PRODUCT GUIDE COMPLETE METAL PROTECTION Worth doing, worth Dulux. Metalshields PRODUCT GUIDE Dulux Dulux has been manufacturing and supplying superior coatings for over

More information

IMRON 3.5 HG HIGH GLOSS POLYURETHANE (formerly Imron 333M )

IMRON 3.5 HG HIGH GLOSS POLYURETHANE (formerly Imron 333M ) HIGH GLOSS POLYURETHANE (formerly Imron 333M ) Imron 3.5 HG high gloss aliphatic polyurethane enamel is a high-solids, two-package, VOC conforming product (3.5 lbs./gal.) based on patented DuPont resin

More information

CROWN PAINTING SCHEDULE

CROWN PAINTING SCHEDULE CROWN PAINTING SCHEDULE ALL PAINTS AVAILABLE THROUGH SHERWIN-WILLIAMS PAINT STORES. PLEASE GO TO sherwinwilliams.com store locator to find the store closest to you. These paints are mainly commercial/industrial

More information

Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a

Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a Summit Racing Equipment s Paint and Auto Refinishing System was developed specifically for the home enthusiast and small shop owner wanting a professional-looking paint job for hundreds of dollars less

More information

Note: Minor color change may occur in exposed service, but corrosion protection will not be compromised

Note: Minor color change may occur in exposed service, but corrosion protection will not be compromised DESCRIPTION One component, high-build heat-resistant inert multipolymeric matrix coating to prevent corrosion under insulation (CUI) of carbon and stainless steel to temperatures ranging up to 650 C (1200

More information

Tractor Painting Tips

Tractor Painting Tips Keeping your tractor or equipment well kept & free from rust & corrosion will extend the life of your investment & help retain its value for a longer period of time. It can be difficult, in many cases,

More information

STUCCO PATCHING AND REPAIR. B. Stucco Crack Repair

STUCCO PATCHING AND REPAIR. B. Stucco Crack Repair STUCCO PATCHING AND REPAIR Existing system: 2-coat stucco system with a polymer-based system finish coat. The base system is a product similar to a LaHabra Fastwall 100 with an El Rey Stucco PermaFlex

More information

Specifically designed for concrete basins and porous substrates

Specifically designed for concrete basins and porous substrates Specifically designed for concrete basins and porous substrates Team@thermalspraysolutions.com POLYX LINER is a modified thermoplastic copolymer sheet specifically for the use on concrete or other porous

More information

TECHNICAL DATA SHEET HAMMERITE METAL PAINT. Smooth Hammered Satin Aerosol

TECHNICAL DATA SHEET HAMMERITE METAL PAINT. Smooth Hammered Satin Aerosol TECHNICAL DATA SHEET HAMMERITE METAL PAINT Smooth Hammered Satin Aerosol TENDER ITEM NO (Where applicable) Hammerite Products Ltd. ICI Paints, Wexham Road Slough, Berkshire, SL2 5DS. Telephone (01753)

More information

PHOENIX 370-120 Product Data Sheet (Updated on 14-Jan-2012) www.phoenixasia.com.hk

PHOENIX 370-120 Product Data Sheet (Updated on 14-Jan-2012) www.phoenixasia.com.hk DESCRIPTION A water borne thin film intumescent coating for the fire protection of structural steelwork. PRODUCT FEATURES AND RECOMMENDED USES Provides up to 120 minutes fire resistance to structural steelwork.

More information

360 6th Street, Daveluyville, Quebec G0Z 1C0 CanaDa Toll free: Fax:

360 6th Street, Daveluyville, Quebec G0Z 1C0 CanaDa Toll free: Fax: INDUSTRIAL COATINGS MANUFACTURER Painting Guide Problems, causes and solutions 360 6th Street, Daveluyville, Quebec G0Z 1C0 CanaDa Toll free: 1 866 815-4080 Fax: 819 367-4030 www.sunamco.net info@sunamco.net

More information

BLACK JACK ALL WEATHER ROOF COATING

BLACK JACK ALL WEATHER ROOF COATING PAGE: 1 of 6 PRINT DATE: 16/09/2004 BLACK JACK ALL WEATHER ROOF COATING DESCRIPTION BLACK JACK ALL WEATHER ROOF COATING is a solvent based, full bodied black brushable compound with added fibres for reinforcement.

More information

ONBOARD MAINTENANCE PAINT GUIDE

ONBOARD MAINTENANCE PAINT GUIDE ONBOARD MAINTENANCE PAINT GUIDE CONTENT Page A practical Onboard Maintenance Paint Guide 1.0 2.0 3.0 INSPECTION AND PLANNING 4 HSE 6 SURFACE PREPARATION 8 The purpose of this guide is to provide easy and

More information

PLASTERING, PAINTING AND POLISHING

PLASTERING, PAINTING AND POLISHING Plastering, Painting and Polishing :: 95 13 PLASTERING, PAINTING AND POLISHING 13.1 INTRODUCTION After the completion and making the building infrastructure strong in order to save it and its fittings

More information

4. Preparatory Work. preparatory work 4.1 PLANNING 4.2 SURFACE PREPARATION

4. Preparatory Work. preparatory work 4.1 PLANNING 4.2 SURFACE PREPARATION 4. Preparatory Work 4.1 PLANNING Quality control starts with good planning and management. An Inspection and Test Plan, ITP (refer to Appendix D) which lists down the project s inspection and testing requirements

More information

SECTION EXTERIOR PAINTING

SECTION EXTERIOR PAINTING SECTION 09911 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

PRODUCT DATA SHEET DESCRIPTION:

PRODUCT DATA SHEET DESCRIPTION: DESCRIPTION: is a range of surface coatings based on State of the Art epoxy / urethane chemistry. The urethane polymer is pre-bonded to the epoxy resin rendering the coating isocyanate free. The synergistic

More information

Th- 525 Exterior Coating / Silicone modified. Th-530 Interior Coating / Silicone modified. Th-523 Flex Exterior Coating / Silicone modified

Th- 525 Exterior Coating / Silicone modified. Th-530 Interior Coating / Silicone modified. Th-523 Flex Exterior Coating / Silicone modified Th-550 Roof Guard / Silicone modified Water-Borne matt coating, based on Elastomeric Acrylic Polyurethane emulsion and modified by silicone resin for roofs. All types of exterior mineral facades (Masonry,

More information

General Surface Preparation

General Surface Preparation General Surface Preparation Proper surface preparation will contribute significantly to the longevity of Ace Paint products. Follow these general guidelines for best results. CLEAN: Paint will not adhere

More information

Color for Metal. Paint and coating solutions for metal surfaces

Color for Metal. Paint and coating solutions for metal surfaces Color for Metal Paint and coating solutions for metal surfaces Tambour for metal surface Resistant to worldwide weather conditions Hammerton Hammered - Ready made shades Medium Green 654-314 Azure 654-319

More information

ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials

ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials ARDEX GUIDE SPECIFICATION ARDEX Exterior Concrete Repair & Resurfacing Polymer-Modified, Cement-Based, Patch & Horizontal Overlay Materials SECTION 03 92 50 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings,

More information

PRODUCT DATA SHEET DESCRIPTION:

PRODUCT DATA SHEET DESCRIPTION: DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.

More information

MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES

MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES Liquid Coating Properties Composition VOC Content, ASTM D2369 Water Content, ASTM D4017 Physical Properties Calculating Physical Constants of Coatings, ASTM D5201 Density, ASTM D1475 Flash Point, ASTM

More information

PRODUCT DATA SHEET DESCRIPTION:

PRODUCT DATA SHEET DESCRIPTION: DESCRIPTION: Pipe Coating is based on the latest Zero VOC Novalac Technology. The product cures to a highly cross-linked coating for high temperature service in the Oil and Gas Industry [cathodic disbonding

More information

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C

Property Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1 35 C Other Technical Data Sheet 528;529 1,2 528 epoxy mastic VValidationDate). 1 Product description This is a two component amine cured epoxy mastic coating. It is a surface tolerant, high solids, high build

More information

09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS

09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS 09990 MOLD REMEDIATION, LEAD-BASED PAINT ABATEMENT AND ENCASEMENT OF ASBESTOS PDS SE-160 01-2006 1. PRODUCT NAME SE-160 Clear Surface Coating (water-based copolymer) Specialty Elastomeric Topcoat 2. MANUFACTURER

More information

Index: Introduction To Auto Air Colours. Introduction Required Materials Preparation Application Curing Coating ===================================

Index: Introduction To Auto Air Colours. Introduction Required Materials Preparation Application Curing Coating =================================== Index: Introduction Required Materials Preparation Application Curing Coating =================================== Introduction To Auto Air Colours Createx auto air colours are base coat graphic paints

More information

PRODUCT DATA SHEET SP-4888 DAMP SURFACE COATING

PRODUCT DATA SHEET SP-4888 DAMP SURFACE COATING DESCRIPTION: ADVANTAGES: USES: APPLICATION: SP-4888 Damp Surface Coating is a two-component epoxy coating developed specifically for application on wet or damp steel surfaces. In addition, it may be applied

More information

Application Instructions for Keystone Kool Deck on Existing Concrete

Application Instructions for Keystone Kool Deck on Existing Concrete Application Instructions for Keystone Kool Deck on Existing Concrete REQUIRED MATERIALS Keystone Kool Deck PTA Bonding Agent Water 20 Mesh Marble Sand White Portland Cement OPTIONAL TOOLS Mortex Ad-Tex

More information

Triarch Products Over Various Interior Substrates

Triarch Products Over Various Interior Substrates Triarch products work well over a variety of substrates, both for interior and exterior settings. This document will only discuss interior substrates and is not intended to be a technical discussion of

More information

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests Product Data Sheet Edition 05/12/2014 Identification no: 020204030010000044 Sikadur -41 CF Rapid 3-part thixotropic epoxy patching mortar Construction Product Description Uses Characteristics / Advantages

More information

Section Painting and Finishes (General)

Section Painting and Finishes (General) Section 099100 Painting and Finishes (General) PART 1 - GENERAL 1.01 Conditions A. The general provisions of the Contract, including General Conditions and Special Provisions apply to the work specified

More information

Material Product Data Sheet Sealers for Thermal Spray Coatings

Material Product Data Sheet Sealers for Thermal Spray Coatings Material Product Data Sheet Sealers for Thermal Spray Coatings Thermal Spray Products: AP, APT Thinner, ERS, SA, URS, Metco 185 Sealer 1 Introduction Sealers are materials that penetrate the pores of thermal

More information

Contents. Complete wall installation. Cladding installation guidelines. Grooving & bending guidelines (corner)

Contents. Complete wall installation. Cladding installation guidelines. Grooving & bending guidelines (corner) Contents Complete wall installation Cladding installation guidelines Grooving & bending guidelines (corner) Complete Wall Installation Wall Cladding Installation Before you start IMPORTANT NOTE Palopaque/Palopaque

More information

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II

TCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II SECTION 099113 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification

More information

BESSEY Training BESSEY Tools North America Alvin Products

BESSEY Training BESSEY Tools North America Alvin Products BESSEY Training BESSEY Tools North America Alvin Products Page 1-1 Lab Metal A ready to use, aluminum filled metal repair, filler and patching compound. Easy to use Ready to use straight out of the can.

More information

SECTION EXTERIOR PAINTING

SECTION EXTERIOR PAINTING New Football Stadium 09.91.13-1 PART 1 GENERAL 1.01 SECTION INCLUDES A. Surface preparation. B. Field application of paints. SECTION 09.91.13 EXTERIOR PAINTING C. Scope: Finish exterior surfaces exposed

More information

Color for Wood. Paint and coating solutions for wood and wood accessories

Color for Wood. Paint and coating solutions for wood and wood accessories Color for Wood Paint and coating solutions for wood and wood accessories Advancing to water based paint and coatings FAST Drying DURRABLE Over a long period of time Odorless ALL THE BENEFITS OF WATER BASED

More information

Unit PO06K Knowledge of Repairing Minor Paint Defects

Unit PO06K Knowledge of Repairing Minor Paint Defects Assessment Requirements Unit PO06K Knowledge of Repairing Minor Paint Defects Content: Minor surface defects to include: i. scratches ii. chips iii. dents iv. corrosion v. contamination vi. blisters (including

More information

G4 is browny translucent in colour and is effected by UV light. Therefore it is for internal use unless top coated to protect it from UV light

G4 is browny translucent in colour and is effected by UV light. Therefore it is for internal use unless top coated to protect it from UV light G4 Damp Seal is a polyurethane that hardens with moisture. It is browny tranclucent in colour. G4 provides a tough, highly durable non-porous seal on most porous materials. Since G4 is hardened by moisture

More information

SECTION PAINTING AND COATING

SECTION PAINTING AND COATING SECTION 09 9000 PART 1 GENERAL 1.01 SECTION INCLUDES A. Surface preparation. B. Field application of paints, stains, varnishes, and other coatings. C. Scope: Finish all interior and exterior surfaces exposed

More information

RUBBER SYNTHETIC RUBBER COATING PAINTING INSTRUCTIONS FOR PAINT GUN. comp

RUBBER SYNTHETIC RUBBER COATING PAINTING INSTRUCTIONS FOR PAINT GUN. comp RUBBER comp SYNTHETIC RUBBER COATING PAINTING INSTRUCTIONS FOR PAINT GUN The original RUBBERcomp synthetic rubber coating forms a thick, tough film. The material is based on special rubber polymer coating,

More information

SECTION PAINTS and COATINGS MASTER ARCHITECTURAL PAINTING SPECIFICATION

SECTION PAINTS and COATINGS MASTER ARCHITECTURAL PAINTING SPECIFICATION SECTION 09 90 00 PAINTS and COATINGS MASTER ARCHITECTURAL PAINTING SPECIFICATION December 2, 2014 Behr Process Corporation 3400 W. Segerstrom Avenue, Santa Ana, California 92704 (714) 545-7101 SECTION

More information

- MINI - APPLICATION GUIDE THE PROVEN PERFORMER THAT NEVER LETS GO REV

- MINI - APPLICATION GUIDE THE PROVEN PERFORMER THAT NEVER LETS GO REV The solution. - MINI - APPLICATION GUIDE THE PROVEN PERFORMER THAT NEVER LETS GO REV 04/11 Australian Made & Owned INTRODUCTION BondCrete the proven performer has evolved since 1951 into the most versatile

More information

Installation System. Existing Resilient Sheet Floors

Installation System. Existing Resilient Sheet Floors Vinyl Composition Tile Installation System Product Adhesive/Full Spread Adhesive/Tile-On Comment Imperial Texture MultiColor RAVE Stonetex Companion Square Feature Tile/Strips ARTEFFECTS SAFETY ZONE Vinyl

More information

SECTION 09900 PAINTS AND COATINGS. Display hidden notes to specifier by using "Tools"/"Options"/"View"/"Hidden Text".

SECTION 09900 PAINTS AND COATINGS. Display hidden notes to specifier by using Tools/Options/View/Hidden Text. A PPG Brand SECTION 09900 PAINTS AND COATINGS Display hidden notes to specifier by using "Tools"/"Options"/"View"/"Hidden Text". PART 1 GENERAL 1.1 SECTION INCLUDES A. Surface preparation and field painting

More information

Primer-Sealers Solutions

Primer-Sealers Solutions Guide to Primer-Sealers Solutions for interior and exterior use Create a ready-to-paint surface, while sealing in odors and stains, and ensure the durability, appearance and success of your job. Why Prime-Seal

More information

3 MASTICS & FILLERS... 6 4 NON-SKID PAINT... 7 5 THINNERS... 7

3 MASTICS & FILLERS... 6 4 NON-SKID PAINT... 7 5 THINNERS... 7 1 ANTIFOULINGS... 1 1.1 HARD MATRIX ANTIFOULINGS... 2 1.2 SELF POLISHING ANTIFOULINGS... 2 1.3 RACING BOTTOM PAINTS... 2 1.4 ANTIFOULINGS FOR ALUMINIUM BOATS... 3 1.5 ANTIFOULING FOR PROPELLERS... 3 1.6

More information

Technical Information

Technical Information Technical Information Choosing Your Antifouling Marine fouling growth will affect all vessels, although the type and density will be dependent on many factors including how often the vessel is used, where

More information

Application of Exterior Wood Finishes

Application of Exterior Wood Finishes Application of Exterior Wood Finishes The following information is excerpted from the publication, Exterior Wood in the South Selection, Applications, and Finishes by Daniel L. Cassens and William C. Feist;

More information

TIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings.

TIGER Drylac U.S.A., Inc. 3855 Swenson Avenue St Charles, IL T 800 243 8148 F 877 926 8148 office.us@tiger-coatings.us www.tiger-coatings. Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel

More information

RIW TOUGHSEAL. Toughseal is a solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in premeasured BENEFITS

RIW TOUGHSEAL. Toughseal is a solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in premeasured BENEFITS CI/SfB Vn6 L6814 April 2014 RIW TOUGHSEAL is a solvent free polymer modified epoxide coating, supplied as a two part pack of base and hardener in premeasured proportions. BENEFITS l Water and water vapour

More information

Prior to beginning work, Contractor shall furnish to Owner the following:

Prior to beginning work, Contractor shall furnish to Owner the following: DIVISION 8 PAINTING SPECIFICATIONS 8.1 General 8.1.1 Scope Contractor shall provide all labor, material, and equipment and perform all operations necessary for all painting work specified including the

More information

DuPont ChromaOne Acrylic Urethane Single Stage

DuPont ChromaOne Acrylic Urethane Single Stage cdupont Automotive Finishes ChromaSystem Technical Manual Description ChromaOne is a productive acrylic urethane designed for spot, panel and overall repairs of OEM Single Stage finishes, both solids and

More information

Spray applied pure Polyurea membrane

Spray applied pure Polyurea membrane Product Data Sheet Edition 07/08/2008 Identification no: 02 07 02 03 001 0 000020 Sikalastic -841 ST Spray applied pure Polyurea membrane Construction Product Description Uses Characteristics / Advantages

More information

Combination well done

Combination well done Combination well done Zinc rich primers with micaceous iron oxide. Libuse Hochmannová. Micaceous iron oxide (MIO) is widespread in protective coatings due to its outstanding anticorrosive properties. A

More information

Corrosion Control Metalizing Brief Overview

Corrosion Control Metalizing Brief Overview Corrosion Control Metalizing Brief Overview Contact: Dave Wixson TMS Metalizing Systems, Ltd. The Metalizing Source January 2015 1 Presentation Content Metalizing Overview Standards & Surface Preparation

More information

family of products is really Reichhold s answer to the growing need to meet more stringent regulations and performance requirements.

family of products is really Reichhold s answer to the growing need to meet more stringent regulations and performance requirements. Alkyd performance. Water cleanup. Beckosol AQ is a new platform of low VOC alkyd latex resins made from renewable resources. We take conventional alkyd chemistry and emulsify it in water to deliver a unique

More information

DIVISION 9 FINISHES 09900-1 PAINTING

DIVISION 9 FINISHES 09900-1 PAINTING DIVISION 9 FINISHES 09900-1 DESIGN STANDARDS 1. GENERAL: This section includes cleaning and touch-up painting of structural steel connections and miscellaneous metals, painting, and finishing of interior

More information

Guide to Maximizing Spray Paint Adhesion

Guide to Maximizing Spray Paint Adhesion Guide to Maximizing Spray Paint Adhesion Introduction The world of paint has come a long way since its origin. We not only have a myriad of color options, but there are also far more paint types available

More information

WATERPROOFING OF WET ROOMS

WATERPROOFING OF WET ROOMS WATERPROOFING OF WET ROOMS Waterproofing under tiles For longterm enjoyment of a wetroom area a complete and resistant waterproofing system is an important precondition. Most tiles are by themselves waterproof

More information

Window and Door Care and Maintenance

Window and Door Care and Maintenance Window and Door Care and Maintenance 1. Installation 2. Paint/Stain 3. Hardware/Operation/Adjustment 4. Initial Cleaning 5. Ongoing Maintenance 6. Avoid 7. Problems/Trouble-Shooting 1. Installation: Your

More information

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C

Property Test/Standard Description Solids by volume. ISO 3233 Flash point ISO 3679 Method 1 130 C Other Technical Data Sheet 8744;8745 6 8744 VValidationDate). 1 Product description This is a two component fairing compound/filler. It is an ultra lightweight, solvent free product. It has excellent sanding

More information

Flooring. Product Selection Guide. Visit

Flooring. Product Selection Guide. Visit Flooring Product Selection Guide Visit www.sherwin-williams.eu Product Selection Guide for Flooring Sherwin-Williams flooring finishes Sherwin-Williams parquet coating systems offer endless possibilities,

More information

Maintenance Guide. Heveatech Decking

Maintenance Guide. Heveatech Decking Maintenance Guide Heveatech Decking Table of Content Introduction 3 Daily Cleaning 4 Removing Mold 5 Recoating 6 Introduction Once you have decided to invest in a decking with Heveatech, there are some

More information

Epoxy Floor Coating Problem Solving Guide

Epoxy Floor Coating Problem Solving Guide Table of Contents: Page: Troubleshooting Issue: 2. Color Differential 3. Fish Eye 4. Milky or Cloudy Coatings 5. Orange Peel 6. Peeling or Delamination 8. Delamination between Coats 9. Pinholes/Bubbling

More information

Most commonly Liquid Tub Liners are used for restoration of bathtubs.

Most commonly Liquid Tub Liners are used for restoration of bathtubs. Most commonly Liquid Tub Liners are used for restoration of bathtubs. Due to that, the provided below detailed instruction is for restoration of the bath tubs. Quite the same way can be used for restoration

More information

Building Owners Guide to a Duro-Last System!

Building Owners Guide to a Duro-Last System! Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof

More information

3.8 HSP (High Solids Polyurethane)

3.8 HSP (High Solids Polyurethane) Description is a single-stage topcoat designed for commercial and automotive refinishing. This product provides Superior UV durability as well as commercial grade chemical resistance. 3.8 HSP has excellent

More information

Making Professional Coating Results A Reality

Making Professional Coating Results A Reality Game-Changing Application System Making Professional Coating Results A Reality Hillyard Concrete Defense changes the way coatings are applied - delivering professional results without the cost of professional

More information

Wonder Wood Stain (WWS)

Wonder Wood Stain (WWS) Wonder Wood Stain (WWS) Exterior Stain Product Overview Sales Version Wonder Wood Stain Waterborne Exterior Semi-Transparent Stain What does the professional stain contractor look for in a stain? No problems

More information

PART 1. GENERAL 1.01 Requirements: A. Any changes from this standard shall be submitted to and be approved by the Project Manager.

PART 1. GENERAL 1.01 Requirements: A. Any changes from this standard shall be submitted to and be approved by the Project Manager. December 2013, Rev. 01 09 9100 - Painting PART 1. GENERAL 1.01 Requirements: A. Any changes from this standard shall be submitted to and be approved by the Project Manager. B. All design, remodeling and

More information

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND.

SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. SECTION 623 CONCRETE BONDING COMPOUND, EPOXY MORTAR AND EPOXY POLYMER CONCRETE OVERLAY SECTION 623.10 CONCRETE BONDING COMPOUND. 623.10.1 Description. This work shall consist of preparing the surface,

More information