MICRO SWITCH Premium Miniature Basic Switches. V7 Series. Datasheet

Transcription

1 MICRO SWITCH Premium Miniature Basic Switches V7 Series Datasheet

2 MICRO SWITCH V7 Series Premium Miniature Basic Switches Honeywell s MICRO SWITCH V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies. The V7 switch is available as a pin plunger style or with optional integral or auxiliary levers to actuate the switch and offer versatility in the application. The switch requires as little as 0,5 Newtons [approximately ½ ounce] to operate for extremely sensitive applications or an operating force of almost 4 Newtons [4 ounces] where higher forces are required. The V7 switch can reliably control logic level electrical loads from less than 0. A to power duty switching up to 25 A. Agency certifications for the MICRO SWITCH V7 switches are provided through CSA, ENEC, and UL for global use around the world. What makes our switches better? Certified with CSA, ENEC, and UL for global acceptability Reliable snap-spring mechanism with more than 60 years of proven service Available with pin plungers, integral levers (fitted two positions), or auxiliary levers to meet equipment requirements Electrical ratings from 0. A up to 25 A for design flexibility in one package size Big performance in a small package. 2 sensing.honeywell.com COST OPTIMIZATION RELIABILITY PERFORMANCE GLOBAL ACCEPTANCE

3 Features and Benefits ACTUATION ON TIME MICRO SWITCH V7 Series basic switches operate with forces as low as 5 g and carry options to increase to 97 g, and can thereby easily accommodate different actuator mechanisms. Global acceptance: UL, CSA, ENEC RELIABLE PERFORMANCE IN HARSH CONDITIONS Switches feature industry-leading temperature ranges of -40 C to 75 C [-40 F to 47 F] to allow for years of reliable performance in harsh conditions. LONG LIFE CYCLE RATING The long life cycle rating (up to 0,000,000 cycles) reduces the need to replace switches over the life of OEM platform applications, therefore reducing total system cost. DESIGN FLEXIBILITY Available with pin plungers, integral levers (fitted 2 positions), and auxiliary levers to meet a variety of equipment requirements, MICRO SWITCH V7 Series switches also boast electrical ratings from 0. A up to 25 A for design flexibility in one package size. Potential Applications VENDING MACHINE MOTORS Switch controls motors or solenoids in vending machines for dispensing of product. MICROWAVE DOOR INTERLOCK Switch in door interlock of microwave that disconnects power if door opened. OVEN CLEANING LATCH Switch in door latch for oven clean operation. PRESSURE SWITCH ASSEMBLY Pressure switch senses incoming water pressure for power washer. sensing.honeywell.com

4 V7 Series PRODUCT NOMENCLATURE V7 C 7 D8 Switch Type V7 Series Miniature Basic Switch 2 Operating Force 50 g max. 75 g max. (V & J electrical rating) 225 g max. (K & Z electrical rating) 75 g max. 50 g max. Electrical Rating,6 A B C D E North America Europe (ENEC) A 0 A A 5 A 2 Circuitry Code SPDT SPNO SPNC Mounting/ Construction 4,6 50 C [02 F] 2,9 mm [0. in] 50 C [02 F], mm [0.2 in] 85 C [85 F] 2,9 mm [0. in] 85 C [85 F], mm [0.2 in] 85 C [85 F] 2,9 mm [0. in] Termination Style (Inches) D8 E8 D9 E9 P x 0.02 quick connect 0.87 x 0.02 quick connect spread x 0.02 quick connect x 0.02 quick connect spread Left angle PCB 002 Straight 22, mm [0.87 in] Lever Style 2 Straight 5,6 mm [.4 in] Roller 20,6 mm [0.8 in] Roller 4,0 mm [.4 in] Sim. roller 2,8 mm [.29 in] Special Designator Use only if this switch has a special feature. Could be any number g max. 5 g max. F H No rating 0 A 85 C [85 F], mm [0.2 in] 77 C [50 F] w/ 2,9 mm [0. in] P07 SPNO on edge PCB Formed quick-connect terminals available Tall sim. roller 4,0 mm [.4 in] Straight 59,4 mm [2.4 in] 6 6 oz to 4 oz max. J 9 6 A 66 Paddle 9,5 mm [5.5 in] oz max. 85 g max. 00 g max. K S V W X Z A A 6 A 20 A O N L Y Not all combinations of model code are available. Please contact your Honeywell provider/representative for assistance. Formed levers available NOTES: Not all possible combinations are available, these are only guidelines 2 Lever length measured from center of back mounting hole to end of straight lever or center of roller All ratings are UL/CSA, and where noted are also European-rated ENEC 4 Consider the temperature required and the mounting hole size when making this selection 5 Electric ratings W x X only used with A Mounting Construction and vice versa 6 European ENEC rating requires Mounting Construction code 9 or 0 4 sensing.honeywell.com

5 MICRO SWITCH Premium Miniature Basic Switches Table. Specifications Characteristic Parameter Circuitry SPDT, SPNC, SPNO Operating force 0,25 N to,9 N [5 g to 97 g] Termination Actuators quick connect; 4,75 mm x 0,5 mm [0.87 in x 0.02 in] quick connect: 6,5 mm x 0,8 mm [0.25 in x 0.02 in] PCB (printed circuit board) pin plunger, integral lever options, auxiliary lever options Agency certification Operating temperature Mechanical life Contact material Housing material CSA, ENEC, UL; RoHS compliant -40 C to 85 C [-40 F to 85 F], options for 75 C [47 F] up to 0 million cycles silver, gold plated, gold alloy high strength thermoplastic Table 2. Electrical Ratings Rating code UL, CSA ENEC A B C E F 5 A, 250 Vac, 277 Vac () A, 250 Vac 2 /0 HP 250 Vac A / HP, 250 Vac or 277 Vac /2 A 25 Vdc; /4 A 250 Vdc 0 () A, 250 Vac 2 4 A L 5. A /2 HP, 250 Vac or 277 Vac /2A 25 Vdc /4 A 250 Vdc; 5 A L 0 A / HP, 250 Vac or 277 Vac /2 A 25 Vdc 5 (2) A, 250 Vac 2 /4 A 250 Vdc, 4 A L A, 250 Vac, 277 Vac /0 HP 250 Vac S 0. A, (0.05) A, 250 Vac 2 V 2 A HP, 250 Vac, 277 Vac 2 HP 250 Vac, 277 Vac 6 (4) A, 250 Vac 2 W 5. A, 250 Vac, 277 Vac Z 25 A, 277 Vac HP, ; 2 HP, 250 Vac 20 (5) A, 250 Vac 2 Incandescent lamp rating 2 XX(Y) - XX = max. rated resistive value in amps, and (Y) = max. rated inductive value in amps European ENEC rating requires Mounting Construction code 9 or 0. See page four, Mounting Construction column sensing.honeywell.com 5

6 V7 Series PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Pin plunger BZ/BA Type Catalog Listing Elect. Rating UL/CSA (CE) Elect. Rating Spec. (page 4) Contacts O.F. max. newtons [grams] O.P. nominal mm [inches] P.T. max. mm [inches] O.T. min. mm [inches] V7-2S7DB 0. A (---) S SPDT 0,79 [75] 4,7 [0.578],9 [0.047],27 [0.050] V7-S7D8 0. A (---) S SPDT,47 [50] 4,7 [0.578],9 [0.047],27 [0.050] V7-5F7D8 A (---) F SPDT 0,5 [5] 4,7 [0.578],9 [0.047],27 [0.050] V7-4A7D8 5 A (---) A SPDT 0,25 [25] 4,7 [0.578],9 [0.047],27 [0.050] V7-E7D8 0 A (---) E SPDT 0,49 [50] 4,7 [0.578],9 [0.047],27 [0.050] V7-B7D8 A (---) B SPNC,47 [50] 4,7 [0.578],9 [0.047],27 [0.050] V7-2B7D8 A (---) B SPDT 0,74 [75] 4,7 [0.578],9 [0.047],27 [0.050] V7-2B7E9 A (---) B SPDT 0,74 [75] 4,7 [0.578],9 [0.047],27 [0.050] V7-7B7D8 A (---) B SPDT 2,22 [227] 4,7 [0.578],9 [0.047],27 [0.050] V7-C7D8 5 A (---) C SPDT,47 [50] 4,7 [0.578],9 [0.047],27 [0.050] V7-C7E9 5 A (---) C SPDT,47 [50] 4,7 [0.578],9 [0.047],27 [0.050] V7-C7B8 5 A (---) C SPNC,47 [50] 4,7 [0.578],9 [0.047],27 [0.050] V7-V9E9 2 A (6 A) V SPDT,72 [75] 4,7 [0.578],9 [0.047],27 [0.050] V7-V29E9 2 A (6 A) V SPNO,72 [75] 4,7 [0.578],9 [0.047],27 [0.050] V7-V9E9 2 A (6 A) V SPNC,72 [75] 4,7 [0.578],9 [0.047],27 [0.050] V7-Z9E9 25 A (20 A) Z SPDT 2,2 [225] 4,7 [0.578],9 [0.047],27 [0.050] V7-Z29E9 25 A (20 A) Z SPNO 2,2 [225] 4,7 [0.578],9 [0.047],27 [0.050] V7-Z20E9* 25 A (20 A) Z SPNO 2,2 [225] 4,7 [0.578],9 [0.047],27 [0.050] O.F. Operating force R.F. Release force P.T. Pretravel O.T. Overtravel D.T. Differential travel O.P. Operating position D.T. mm [inches] Lever 22, mm [0.87 in] V7-C7D A (---) C SPDT,57 [60] 5,2 [0.600],52 [0.060] 0,89 [0.05] 0,6 [0.05] max. V7-C7E A (---) C SPDT,57 [60] 5,2 [0.600],52 [0.060] 0,89 [0.05] 0,6 [0.05] max. *, mm mtg holes V7-6C8D8-002* 5 A (---) C SPDT 4,05 [4] 5,2 [0.600],52 [0.060] 0,89 [0.05] 0,6 [0.05] max. 6 sensing.honeywell.com

7 MICRO SWITCH Premium Miniature Basic Switches PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Elect. Rating UL/CSA (CE) Elect. Rating Spec. (page 4) Contacts O.F. max. newtons [grams] O.P. nominal mm [inches] P.T. max. mm [inches] O.T. min. mm [inches] O.F. Operating force R.F. Release force P.T. Pretravel O.T. Overtravel D.T. Differential travel O.P. Operating position D.T. mm [inches] V7-S7D A (---) S SPDT 0,8 [85] 5,2 [0.60],04 [0.20] 2,6 [0.085] 0,76 [0.00] max. V7-S7D A (---) S SPDT 0,29 [0] 5,2 [0.60],04 [0.20] 2,6 [0.085] 0,76 [0.00] max. Lever 5,6 mm [.40 in] V7-S7E A (---) S SPDT 0,29 [0] 5,2 [0.60],04 [0.20] 2,6 [0.085] 0,76 [0.00] max. V7-B7D8-022 A (---) B SPDT 0,80 [82] 5, [0.60],04 [0.20],70 [0.067] 0,69 [0.027] max. V7-B9D8-022 A (0 A) B SPDT 0,80 [82] 5, [0.60],25 [0.28],78 [0.070] 0,7 [0.028] max. V7-2B7D8-022 A (---) B SPDT 0,40 [4] 5, [0.60],04 [0.20],70 [0.067] 0,7 [0.027] max. V7-6B9E9-022 A (0 A) B SPDT 2, [25] 5,2 [0.60],25 [0.28],5 [0.05] 0,76 [0.00] max. V7-S7D A (---) S SPDT 0,6 [6] 5, [0.60] 5,97 [0.25],00 [0.8],27 [0.050] max. Lever 59,4 mm [2.4 in] V7-2B7D8-048 A (---) B SPDT 0,20 [20] 5, [0.60] 5,97 [0.25] 2,92 [0.5],27 [0.050] max. V7-C7D A (---) C SPDT 0,44 [45] 5,2 [0.60] 5,94 [0.24] 4,9 [0.65],52 [0.060] max. V7-V9E A (6 A) V SPDT 0,54 [55] 5,4 [0.605] 6,5 [0.250],05 [0.20],40 [0.055] max. V7-9WAE9-048** 5 A (---) W SPDT 0,88 [90] 5,2 [0.60] 6,5 [0.250],5 [0.24],7 [0.054] max. V7-S7D A (---) S SPDT 0,88 [90] 8,54 [0.70] 2,79 [0.0],90 [0.075] 0,76 [0.00] max. Lever Sim. Roll 2,8 mm [.29 in] V7-E9E A (5 A) E SPDT 0,2 [] 8,54 [0.70] 2,54 [0.00],90 [0.075] 0,76 [0.00] max. V7-B7D8-26 A (---) B SPDT 0,88 [90] 8,54 [0.70] 2,79 [0.0],52 [0.060] 0,76 [0.00] max. V7-C7D A (---) C SPDT 0,89 [9] 8,54 [0.70] 2,79 [0.0],55 [0.06] 0,6 [0.024] max. V7-V29E A (6 A) V SPNO,08 [0] 8,49 [0.728] 2,90 [0.4],62 [0.064] 0,64 [0.025] max. V7-Z0E9-26* 25 A (20 A) Z SPDT, [6] 8,49 [0.728] 2,90 [0.4],62 [0.064] 0,64 [0.025] max. Lever, Roller 20,57 mm [0.8 in] V7-2S7D A (---) S SPDT 0,88 [90] 20,57 [0.80],9 [0.047],02 [0.040] 0,8 [0.05] max. V7-6B9E9-20 A (0 A) B SPDT 4,50 [459] 20,52 [0.808],42 [0.056] 0,86 [0.04] 0, [0.0] max. V7-7B7D8-20 A (---) B SPDT 2,78 [28] 20,52 [0.808],42 [0.056] 0,86 [0.04] 0, [0.0] max. V7-C7D A (---) C SPDT,72 [75] 20,57 [0.80],9 [0.047] 0,8 [0.02] 0.0 [0.02] max. Lever, Roller 4,04 mm [.4 in] V7-S7D A (---) S SPDT 0,8 [85] 20,57 [0.80] 2,84 [0.2] 2,0 [0.080] 0,76 [0.00] max. V7-2A7D A (---) A SPDT 0,42 [4] 20,57 [0.80] 2,92 [0.5],52 [0.060] 0,64[0.025] max. V7-B7D8-207 A (---) B SPDT 0,8 [85] 20,57 [0.80] 2,92 [0.5],52 [0.060] 0,76 [0.00] max. *, mm mtg holes ** 77 C [50 F] V7-C7D A (---) C SPDT 0,88 [90] 20,57 [0.80] 2,92 [0.5],52 [0.060] 0,64[0.025] max. V7-V9E A (6 A) V SPDT 0,98 [00] 20,52 [0.808],07 [0.2],65 [0.065] 0,76 [0.00] max. sensing.honeywell.com 7

8 V7 Series AVAILABLE TERMINALS Quick Connect (QC) Printed Circuit Board (PO2) D8 Terminals: 0.87 in wide x in thick. E8 Terminals: 0.87 in wide x in thick. These terminals interface with snap-on receptacles and other components from AMPMODU interconnection system. E9 Terminals: in wide x 0.02 in thick. STANDARD ACTUATOR OPTIONS 0, , Straight Lever (-002) Roller Lever (-20) 0, , ,8 0. 2,8 00.,0.04 2,90 Ø hole (,0/.22 option) 0.4 2,8 0., ,9 0.5 Straight Lever (-022) Roller Lever (-207) COM NC NO 8,2 max ,90 dia 0.4, opt,20 dia 0.26, opt 22, ,8.4 Straight lever (-022) 2, , ,8 () 0.0 Straight Lever (-048) Simulated Roller Lever (-26) ACCESSORIES Part Number Description 5PA77-V7 Insulator packet: 500 pieces of 0,46 mm [0.08 in] thick varnished fiberglass 5PA260 Plunger boot seal: Elastomer, dust and splash resistant (Switch not included) 8 sensing.honeywell.com

9 9 sensing.honeywell.com MICRO SWITCH Premium Miniature Basic Switches This Honeywell datasheet supports the following MICRO SWITCH V7 Series Basic Switch Listings V7-C7D8-002 V7-C7D V7-6C8D8-002 V7-C27D V7-CD V7-C9D8-002 V7-C7E9-002 V7-6C28E9-002 V7-B7D8-022 V7-B9D8-022 V7-C7D8-022 V7-S7E9-022 V7-6B9E9-022 V7-S7D8-022 V7-2B7D8-022 V7-S7D8-022 V7-B29P V7-C8E9-022 V7-E7E9-022 V7-2B27D8-022 V7-2S7D8-022 V7-9WAE9-022 V7-Z9E9-022 V7-2B7D8-048 V7-V9E9-048 V7-C7D8-048 V7-X2AD8-048 V7-9WAE9-048 V7-B7D8-048 V7-S7D8-048 V7-9W2AE9-048 V7-7B7D8-048 V7-A7D8-048 V7-2B29E9-048 V7-2B9E9-048 V7-6C8D8-048 V7-B27D8-048 V7A7D8048 V7-C7D8-20 V7-7B7D8-20 V7-CD8-20 V7-2B7D8-20 V7-C7E9-20 V7-2S7D8-20 V7-6B9E9-20 V7-S7D8-20 V7-7B7D V7-D9D8-20 V7-A7D8-20 V7-D0E9-20 V7-V7D8-20 V7-C7D8-207 V7-B7D8-207 V7-2B7D8-207 V7-C7E9-207 V7-2A7D8-207 V7-V9E9-207 V7-B0E9-207 V7-A27D8-207 V7-7D7D8-207 V7-2S7D8-207 V7-S7D8-207 V7-C7D8-26 V7-B7D8-26 V7-6C7D8-26 V7-Z0E9-26 V7-S7D8-26 V7-C27E9-26 V7-V29E9-26 V7-E9E9-26 V7Z0E9-26 V7-7B9D8-26 V7-S8D8-26 V7-B7D8-26 V7-A7D8-26 V7-B78-26 V7-A27D8-66 V7-C7D8 V7-2B7D8 V7-V9E9 V7-Z9E9 V7-B7D8 V7-2S7D8 V7-C7E9 V7-C7D8 V7-Z29E9 V7-E7D8 V7-5F7D8 V7-7B7D8 V7-S7D8 V7-V9E9 V7-E7E9 V7-Z20E9 V7-4A7D8 V7-5F27E9 V7-Y9E9 V7-V29E9 V7-D0D8 V7-2B7E9 V7-6C7D8 V7-4S7D8 V7-Y9E9 V7-C27E9 V7Z0E9 V7-B7D8 V7-6B9D8 V7-C8D8 V7-A7D8 V7-2B29D8 V7-5D7E9 V7-A7D8 V7-4S7D8 V7-7B9E9 V7-Z0E9 V7-2A7E9 V7-5F27D8 V7-S7E9 V7-S0D8 V7-Z9E9 V7-2B27E9 V7-E9E9 V7-A7P02 V7-4S27D8 V7-7B27D8 V7-ZE9 V7-Z0E9 V7-2A27D8 V7-7A9D8 V7-2B7E9 V7-C29D8 V7-CE9 V7-A8D8 V7-9W2AE9 V7-4A8E9 V7-9WAE9 V7-A28D8 V7-B9E9 V7-K29E9 V7-2B7-D8 V7-E0E8 V7-6C7E9-06 V7-C27D94 V7-C7D8-295 V7-C29D7 V7-ZE99 V7-V9E9-269 V7-6CD8-2 V7-6B9D8-057 V7-2B7D8-62 V7-4A29E8-424 V7-C7D844 V7-B7D8-22 V7-C7D V7-7A9D8-74 V7-4A7D8-407 V7-5F7D8-289 V7-6C7D8-057 V7-2B29D8-84 V7-XAD8-04 V7-6C7D8-62 V7-A2E9-72 V7-X2AD9C2 V7-C27E9-292 V7-2S7E9-420 V7-C7D8-294 V7-7B7D8-07 V7-S7D8-48 V7-7C9D8-640 V7-V9E V7-A7D8-057 V7-E7D8-66 V7-5F7D8-6 V7-C7E9-292 V7-6A7D8-057 V7-2E7E9-420 V7-6C7D8-49 V7-XAD9C V7-7B0D8-274 V7-7B9D8-426 V7-E7D8-48 V7-A28D882 V7-7B29D88 V7-7B7D8-48 V7-2E7E9-66 V7-C29E7 V7-S9D8-69 V7-7B9D8-640 V7-7B7D8-40 V7-X2AE9-292 V7-ZE987 V7-X2AD8-294 V7-6B9D8-672 V7-7B29E9-05 V7-V20E94 V7-B9D8-69 5PA77-V7 5PA260

10 V7 Series ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: Product installation instructions Product range guide Product nomenclature tree Product application-specific information Application note: Electronic sensors and electromechanical switches in valves and flow meters Application note: Electronic sensors and MICRO SWITCH switches in industrial air compressors Application note: Sensors and switches for HVAC/R applications Application note: Sensors and switches in oil rig applications Application note: Sensors and switches in sanitary valves Application note: Sensors and switches for valve monitors and valve indicators Application note: Treadmill equipment Application note: V7 available terminals Technical bulletin: Applying precision switches Technical bulletin: Low energy switch guide WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. 0 sensing.honeywell.com

11 Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell s sensing and control products, call or , visit sensing.honeywell.com, or inquiries to info.sc@honeywell.com Sensing and Control Honeywell 985 Douglas Drive North Golden Valley, MN honeywell.com EN IL50 GLO June 204 Copyright 204 Honeywell International Inc. All rights reserved.