0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector"

Transcription

1 .4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 3 contacts: 5 locations / 4 contacts: 7 locations / 5 contacts: 9 locations Grounding connection Grounding connection between receptacle connector and PCB 3 contacts: 1 locations / 4 contacts: 12 locations / 5 contacts: 14 locations Features 1. Space saving design Utilizing its.4 mm pitch, this horizontal connector offers a space saving design and a low height of.9 mm in a single row connector. 2. High speed transmissions Designed to optimize transmission speeds, the DF81 series provides superior signal characteristics. edp TM [Embedded DisplayPort TM ] Ver. 1.3 compatible 5.4 Gbps MIPI (D-PHY) 3.Enhanced shielding Shielding capacity has increased by providing multiple grounding points (see Figure 1). 4. Positive locking structure The positive locking structure utilizes a rotary latch that prevents incomplete mating. (Figure 2) 5. Excellent mating operation Excellent self-alignment allows for easier mating. (Figure 3) 6. Accepts both micro coaxial cable and discrete wire Its versatility allows micro coaxial cable and discrete wire to be used together on a single connector. 7. Solder wicking prevention Nickel barriers are strategically placed between the receptacle s contact area and the soldered lead area to prevent solder wicking. 8. RoHS compliant, Halogen-free Chlorine and bromine are not used in these connectors and do not exceed standard values. * It is defined according to IEC Br: 9 ppm or less, Cl: 9 ppm or less, Br + Cl: 1,5 ppm or less Figure 1 Grounding connection Positive lock by using the latch Unlocking is possible by rotating the latch. Figure 2 ±.45mm Z Y ±.15mm Grounding connection Excellent mating operability Wide self-alignment (X direction: ±.45, Z direction: ±.15) X Figure

2 Product specifications Ratings Rated Current Rated Voltage [Discrete wire] AWG #34:.8 A AWG #36:.8 A [Micro coaxial cable] AWG #36:.8 A AWG #4:.3 A AWG #42:.25 A AWG #44:.2 A AWG #46:.15 A 1 V AC/DC (Note 3) (Note 4) Operating Temperature Range Operating Humidity Range Storage Temperature Range Storage Humidity Range -35 to 85ç(Note 1) 2 to 8ç -1 to 6ç (Note 2) 4 to 7ç(Note 2) Items Specifications Conditions 1. Insulation Resistance 5 mø or greater Measured at 1 V DC 2. Withstanding Voltage No flashover or breakdown Conduct 25 V AC for one minute 3. Contact Resistance Signal: 8 mø or lower GND: 8 mø or lower Measured at 1 ma (DC or 1, Hz) 4. Vibration Resistance No electric outage of 1μs or greater 1 cycles in each of three directions at frequency 1-55 Hz, single amplitude.75 mm 5. Moisture Resistance 6. Temperature Cycles 7. Mating Cycles 8. Solder Heat Resistance Contact resistance (amount of change from the initial state): 5 mø or lower Insulation resistance: 25 Mø or greater Contact resistance (amount of change from the initial state): 5 mø or lower Insulation resistance: 25 Mø or greater Contact resistance (amount of change from the initial state): 5 mø or lower There should be no dissolution of the resin part which will influence the performance. Temperature: 4± 2 C, Humidity: 9 to 95%, Leave 96 hours (-55 C: 3 minutes 5 to 35 C: 2 to 3 minutes 85 C: 3 minutes 5 to 35 C: 2 to 3 minutes) 5 cycles 3 cycles Reflow: According to the Recommended Temperature Profile Hand soldering: Soldering iron temperature of 35 C for 3 seconds (Note 1) Temperature rise at the time of electrification is included. (Note 2) The term storage refers to the long-term storage of unused products in its original packaging before PCB mounting. Operating Temperature/Humidity Ranges are applied to the deenergized state after mounting of PCB and the temporary storage state during transportation. (Note 3) Current will vary depending on use conditions. (Note 4) Rated current value is set only using the temperature rise value of the connector. (Note 5) The above specifications are representative of this series. Please refer to the specifications for approval for official individual agreement. Materials Product Parts Materials Treatment UL Recognition Insulator LCP Black UL94V- Receptacle Contact Phosphor bronze Gold plating Metal fitting Stainless steel Partially gold plated Insulator LCP Black UL94V- Plug Contact Phosphor bronze Gold plating Outer shell Stainless steel Partially gold plated Shell Outer shell Stainless steel Partially gold plated Latch Locking bar Stainless steel / polyester Product Number Structure Refer to the chart below when searching for the part number nomenclature. Please make a selection from the connectors listed on pages 3 to 6 of this catalog when placing orders. lconnector DF 81 * S.4 H (* *) ❶ ❷ ❸ ❹ ❺ ❻ ❼ DF 81 * P SHL ❶ ❷ ❸ ❹ ❽ ❶ Series Name: DF ❷ Series No.: 81 ❸ Numbers of Contacts: 3, 4, 5 ❹ Connector type S: Receptacle P: Plug ❺ Contact pitch:.4mm ❻ Termination Type H: Right Angle SMT SD: Solder wire termination ❼ Packaging Type (51): Embossed packaging ❽ Parts for Assembly SHL: Outer shell LCH: Latch 2

3 Receptacle (SMT) Contact No ± ±.2.65±.2 P=.4±.5.8±.15 A±.2 B±.1.9±.1.82±.2 C±.2 D±.2 (Note 2) BRecommended PCB mounting pattern (1.285) 2.57±.2.9±.2 (Note1) 1.34±.2.77±.2.255±.2 GND Area or Resist.89±.3 Contact No.1 E MIN F±.3 G±.3 H±.1 No Component Mounting Area (Note2) (Note2) 2.4±.3.6±.3 7.2±.3(Note2) 12±.3(Note2).2±.2 P=.4±.2.635±.3(Note2) B±.2.6±.3 J±.3.7±.3 K±.3 L±.3 M±.3 N MIN Product No. HRS No. No. of contacts A B C D DF81-3S-.4H(**) CL ** DF81-4S-.4H(**) CL ** DF81-5S-.4H(**) CL ** ±.2.25±.2 2.4MIN 2.44MIN [Specification Number] -**, (**) (51): Embossed packaging (Note 1) Please place your orders for embossed packaged products in full reel quantities (8, connectors per reel). (Note 2) Indicates the center line of the connector with the size of 2.37±.2. This matches to the center line of the connector with the size of 2.57±.2 shown in the recommended pattern schematic. Product No. HRS No. No. of contacts B E F G H J K L M N DF81-3S-.4H(**) CL ** DF81-4S-.4H(**) CL ** DF81-5S-.4H(**) CL ** (Note 1) Indicates the center line of the connector with the size of 2.57±.2. This matches to the center line of the connector with the size of 2.37±.2 shown in the connector diagram. (Note 2) The amount of space occupied depends on the pin count. This schematic represents the 4 contact connector. 3

4 Plug 2.64± ±.2 Contact No.1 P=.4±.5 A±.1.82±.1.66±.1 (.3) B±.1 C±.1 D±.1 E±.1 F±.1 1±.5 (1.5).3±.5 G±.1 (.35) (.4) [Specification Number] -**, (**) (51): Embossed packaging Product No. HRS No. No. of contacts A B C D E F G H DF81-3P-.4SD(**) CL ** DF81-4P-.4SD(**) CL ** DF81-5P-.4SD(**) CL ** (Note 1) Please place your orders for embossed packaged products in full reel quantities (8, connectors per reel). (Note 2) Outer shell (DF81-*P-SHL)/latch (DF81-*P-LCH) is required when connecting wires. BRecommended micro coaxial cable preparation H±.1 A±.15 P=.4±.7 J Ø.25±.2 (dielectric) 1.15±.5.7±.5 Ø.38±.2.51±.3 J(FREE).1MAX.4±.5.5MAX Core cable (Soldered) (Exposed length of outer conductor) (Grounding bar application thickness) (Note 1) Lead free pre-soldering is required to center conductors before termination. 4

5 Outer shell A±.1.69±.1 (2) (1.5) 1±.5.3±.5 B±.1 C±.1 Product No. HRS No. No. of contacts A B C DF81-3P-SHL CL DF81-4P-SHL CL DF81-5P-SHL CL (Note 1) Please place your orders in full reel quantities (1, shells per reel). Latch (A) (Ø.5) (4.1) Product No. HRS No. No. of contacts A DF81-3P-LCH CL DF81-4P-LCH CL DF81-5P-LCH CL (Note 1) Please place your orders by full box quantities (1, latches per box). 5

6 BEmboss tape dimensions (conforms to JIS C 86) lreceptacle lreel Condition Dimensions 4±.1 2±.1 Ø ± ±.1 (1.5) Ø13±.2 Part No. Label Ø1.5 sprocket hole far side.2±.5 Product No. HRS No. No. of contacts A B C D E DF81-3S-.4H(51) CL DF81-4S-.4H(51) CL DF81-5S-.4H(51) CL (Note 1)Sprocket hole for 3 contacts is provided only on one side.(only a Ø1.5 hole on the top of the diagram) BEmboss Tape Dimensions lplug lreel Dimensions 4±.1 2±.1 8±.1 Ø B±.1 C±.3 A± ±.1 (1.4) Ø13±.2 Part No. Label Ø1.5 sprocket hole far side (Ø79) Ø382MAX B±.1 C±.3 A±.1 (Ø79) Ø382MAX Ø21±.8 2±.5 D +2 E MAX R Unreeling direction Ø21±.8 2±.5 D +2 E MAX.2±.5 R Unreeling direction Product No. HRS No. No. of contacts A B C D E DF8-3P-.5SD(51) CL DF8-4P-.5SD(51) CL DF8-5P-.5SD(51) CL (Note 1)Sprocket hole for 3 contacts is provided only on one side.(only a Ø1.5 hole on the top of the diagram) 6

7 BPrecautions 1. Recommended Temperature Profile (Compatible with lead-free soldering) 25 MAX 25ç 22 22ç 2 Temperature(ç) ç 18ç 9 to 12 seconds Preheating time within 6 seconds Soldering time Time (seconds) [Applicable Conditions] 1. Peak temperature: max. 25 C 2. Heating unit: no less than 22 C, within 6 seconds 3. Preheating unit: 15 to 18 C for 9 to 12 seconds 4. Number of times: no more than 2 times * Solder composition: Sn-3Ag-.5Cu (Note 1) This temperature profile is a recommended value. 2. Recommended Hand Soldering Conditions 3. Recommended Screen Thickness and Aperture Ratio (Pattern surface ratio) 4. Warpage of the Board 5. Cleaning Conditions Temperature of soldering iron: max. 35, soldering time: within 3 seconds Thickness:.1 mm, aperture ratio: 8% for lead section, 5% to 9% for grounding section (See the separate specifications for approval.) A maximum of.2 mm at the center of connector, as measured from either end of the connector IPA cleaning is allowed. (Cleaning is not recommended because cleaning may change the mating/unmating feeling etc. Please contact us when you use other cleaning agents. ) Precautions when mating/ unmating Handling Precautions Inserting the connector 1.Latch position The latch needs to begin on the top side of the connector. If not, you will not be able to engage the locking mechanism and the mating process cannot be completed. 7

8 [Temporary insertion: Acceptable] The case hole of the plug selfalignment section and the tip of the plug contact cannot be seen. Handling Precautions 2.Temporary insertion Position the plug so that it is parallel to the receptacle. Align the plug, and then gently insert the plug into the receptacle. The plug can now be inserted effortlessly until it reaches the bottom of the temporary insertion position. [Temporary insertion: Not acceptable] Insufficient insertion. The case hole of the plug self-alignment section and the tip of the plug contact can be seen. Plug self-alignment section Enlarged view of section A Case hole Tip section of plug contact Section A Locking Rotating the bail latch engages the locking/unlocking mechanism. 1.How to Lock Rotate the bail latch to lock. Make sure that the bail latch rides over the latch holding section located on each end of the receptacle.(2 locations in total) Enlarged view of section B B [Latch engagement: Acceptable] The bail latch is riding over the latch holding section on the receptacle. 2.How to Unlock Rotate the bail latch to unlock. [Latch engagement: Not acceptable] The bail latch is not riding over the latch holding section on the receptacle. For details on mating/unmating procedures, see the separate mating/unmating procedure sheet. Please note that mating/unmating without mounted on a PCB may cause damage and contact deformation to the connector. Please note that mating/unmating with excessive force in wrong directions may cause damage to the connector. During hand soldering, do not apply flux which will cause flux migration on connector. 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi ,JAPAN TEL: Fax: The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 3/213. Contents are subject to change without notice for the purpose of improvements.

0.5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors

0.5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors .5mm Pitch, Vertical Connection Board-to-Micro Coaxial Cable Connectors DF8 Series Excellent mating workability ±1mm ±1mm Z Y X Figure 1 Features 1. High speed signal connector With its excellent signal

More information

0.6mm Pitch Board-to-Fine-Coaxial Cable Connectors

0.6mm Pitch Board-to-Fine-Coaxial Cable Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

USB3.0 Micro-B Connector

USB3.0 Micro-B Connector USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As

More information

0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector

0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector 0.5 mm Pitch, 1.5 mm Above-the-Board, High-Speed Transmission FPC Connector FH55 Series FH55 Differential Impedance 70ps rise time(20-80%) 100+15%[ø] 100[ø] 100-15%[ø] Dimensional Diagram: 40 pins Characteristics

More information

Subminiature, LAN Modular Jack Connectors

Subminiature, LAN Modular Jack Connectors Subminiature, LAN Modular Jack Connectors TMR-5M Series Features.Fast Ethernet Support Conforms to the TIA/EIA-568-A data wiring standard and meets requirements of CAT5 transmission performance for,-3,6

More information

1.25mm Pitch Super Low profile Crimping Connector

1.25mm Pitch Super Low profile Crimping Connector All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.5mm Pitch SMT Board to Board Connector

0.5mm Pitch SMT Board to Board Connector 0.5mm Pitch SMT Board to Board Connector DF12 Series Correspond to automatic mounting The vacuum pick-up area secures the automatic mounting machine for pick and place. Features 1. Broad Variations of

More information

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height

Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height Lightweight SMT Miniature Coaxial Connectors 1.4 mm Mated Height N.FL Series Mated height comparison (With U.FL-LP(V) ) Features 1. Low profile Nominal mated height is 1.4 mm (Max. 1.5 mm) 2. Small size:

More information

0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors

0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors 0.mm pitch, 0.mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH1C & FH1SC Series Actuator color: Brown FH1SC FPC/FFC thickness: 0.±0.0mm Actuator color: Black Features

More information

SD Memory Card Connectors

SD Memory Card Connectors SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion

More information

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors 0.mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors FH26 Series Space saving(51 pos. shown) 1.0mm.2mm.8mm Metal fittings do no protrude outside of the connector body Features

More information

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz

HMCC SERIES. With SMT PCB Mating Jacks. Electronics LLC. Features: Applications: Low Profile Mated Height: (2.4mm) High Frequency Performance to 6 GHz HMCC SERIES Features: Low Profile Mated Height: (2.4mm) Ultra small PCB profile and surface area High Frequency Performance to 6 GHz Highly Shielded, Ultra-fine Coaxial Cable Three different sizes available

More information

0.3 mm Pitch, 1.0 mm Height FPC Connector

0.3 mm Pitch, 1.0 mm Height FPC Connector 0.3 mm Pitch, 1.0 mm Height FPC Connector FH26 Series Space saving(51 pos. shown) 1.0mm 3.2mm Apr.1.20 Copyright 20 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Low-profile 0.3 mm pitch FPC

More information

Modular Plug Connectors compliant to Cat.6 A Standard

Modular Plug Connectors compliant to Cat.6 A Standard Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact

More information

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz

Subminiature Coaxial Switch 1.6 mm High, DC to 6 GHz All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.

0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. 0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts

More information

SOCKETS FOR SD MEMORY CARD (R TYPE)

SOCKETS FOR SD MEMORY CARD (R TYPE) Enhanced robustness and EMI resistance achieved by the laser-welded double-sided metal shell (SDHC card compatible, with card jump-out and wrong insertion prevention functions) AXA2R SOCKETS FOR SD MEMORY

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors

MAXIMUM SOLUTIONS. Mill-Max Offers New SuperSpeed USB 3.0 Connectors MAXIMUM SOLUTIONS Mill-Max Offers New SuperSpeed USB 3.0 Connectors Mill-Max has expanded its USB family to include four new USB 3.0 connectors. USB 3.0, SuperSpeed USB, provides a 10 X faster data transfer

More information

Interface Connectors for CDMA Type Cellular Phones

Interface Connectors for CDMA Type Cellular Phones Interface Connectors for CDM Type Cellular Phones MQ/SF178 Series Two interface configurations 1X Key 1X EV-DO Key Signal contacts Coaxial connector Features 1. Complies with the requirements of NC-R1-18

More information

UMCC Ultraminiature Coax Connector and Cable Assembly Series

UMCC Ultraminiature Coax Connector and Cable Assembly Series UMCC Ultraminiature Coax Connector and Cable Assembly Series Product Facts Ultra low profile (2.0 mm or 2.5 mm maximum mated height) Easy snap on/off mating Small footprint on PCB (3 mm x 3 mm) Excellent

More information

Interface RF Connector with Switch

Interface RF Connector with Switch NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight

More information

Micro-USB connectors meeting requirements of USB 2.0 Standard

Micro-USB connectors meeting requirements of USB 2.0 Standard NEW Micro-USB connectors meeting requirements of USB 2.0 Standard ZX Series Note: Contact us to ascertain whether a TID number has been acquired for an individual product. Overview Extremely small high

More information

Directory chapter 04

Directory chapter 04 M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................

More information

Amphenol Taiwan Branch

Amphenol Taiwan Branch for Board to Board and wire to Board use. Other cable lengths and customer design available. RoHS compliance. USB 3.0 Type A, Right Angle, Plug, SMT, Standard Type Co-planarity: 0.08mm max. Voltage: 30.0

More information

SOCKETS FOR SD MEMORY CARD (SUPPORTS SDIO)

SOCKETS FOR SD MEMORY CARD (SUPPORTS SDIO) (AXA) UPPER/LOWER METAL SHELL CONSTRUCTION FOR SUPERIOR DURABILITY AND EVEN BETTER ABILITY TO WITHSTAND STATIC ELECTRICITY SOCKETS FOR SD MEMORY CARD (SUPPORTS SDIO) Standard mounting type SDIO grand tab

More information

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors

0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors 0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small

More information

RJ45 Modular Jack Connectors with Pulse Transformers

RJ45 Modular Jack Connectors with Pulse Transformers All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%

Operating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80% All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

Waterproof Connectors for Outdoor Use

Waterproof Connectors for Outdoor Use Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight

More information

0.3 mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors

0.3 mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors 0.3 mm Pitch, Vertical mating, Board-to-Micro Coaxial Cable Connectors DF56 Series High contact reliability Features 1.Small mated height and board occupied space Small pitch (0.3mm) and mated height (1.25mm)

More information

UMCC Ultraminiature Coax Connector & Cable Assembly Series

UMCC Ultraminiature Coax Connector & Cable Assembly Series DESCRIPTION Ultra-Miniature Coax Connector & Cable Assembly Series Extremely low profile Surface mount technology 360 degree mated rotation Excellent price-to-performance ratio APPLICATIONS Wireless LAN,

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,

More information

Product Specification

Product Specification Product Specification Model No.: DC-240-L01-00-TR Description: H=3.00mm Horizontal SMD DC Power Jacks Pin Shaft Diameter: 0.65mm Packing Method: Tape & Reel (600pcs./R) 1. General 1a. Scope The jacks should

More information

RJ45 Modular Jack Connectors with Pulse Transformers

RJ45 Modular Jack Connectors with Pulse Transformers RJ Modular Jack Connectors with Pulse Transformers TMRD - TANA Series Pulse Transformer Circuit Diagram TD+ TX- RD+ RD- 8 GRAND PCB Insulated transformer Circuit Choke coil TX+ TX- RX+ RX- 8 RJ Features.

More information

1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors

1 mm Contact Pitch, Board-to-Cable, Board-to-FPC, Board-to-Micro-coaxial Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height

Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

ZIF Connector & Flat Flexible Cable

ZIF Connector & Flat Flexible Cable ZIF Connector & Flat Flexible Cable 09/08-1 ZIF Connector & Flat Flexible Cable As the demand for higher density in electronic equipment increases, the use of Flexible Flat Cable (FFC) or Flexible Printed

More information

COAX/SIGNAL HYBRID MICRO-D CONNECTORS

COAX/SIGNAL HYBRID MICRO-D CONNECTORS COAX/SIGNAL HYBRID MICRO-D CONNECTORS Omnetics high reliability Micro-D connectors are available with mixed coax/signal contact layouts. The number of coax and signal contacts may be specified to provide

More information

Dielectric withstanding voltage

Dielectric withstanding voltage onnectors LV series onnectors for Mobile Equipment for Mobile Equipment Outline This series of connectors is best suited for wiring within ultra miniature electronic equipment such as cellular phones,

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down

More information

0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors

0.3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors .3mm Pitch 1.1mm Height Top and Bottom Contact Back-Flip actuator Flexible Printed Circuit Connectors FH39 Series 3.45mm Depth 1.1mm Features 1. Low-profile.3mm pitch connector with top and bottom contact

More information

0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC

0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC 0.5mm pitch, 2.5mm above the board,high speed transmission connector for shielded FFC FH41 Series THine Electronics, Inc. Next-generation chipset (V-by-One HS*) Compatible connector Features 1. Compatibility

More information

Modular Plug Connectors Compliant to Enhanced Category 5 Standards

Modular Plug Connectors Compliant to Enhanced Category 5 Standards Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B

More information

0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors

0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors .4 mm Pitch, 1.5 to 4. mm Height, Board-to-Board and Board-to-FPC Connectors DF4 Series Space saving Space saving Features 1. High density mounting Space saving design that has a minimum connector width,

More information

Mini USB Header USCAR 30

Mini USB Header USCAR 30 Product Specification 108-94402 03 SEP 13 Rev A Mini USB Header 180 - USCAR 30 1. SCOPE This specification covers the performance, tests and quality requirements on a Mini-USB 180 Vertical PCB header,

More information

RoHS. UMCC Ultraminiature Coax Connector & Cable Assembly Series. Ready DESCRIPTION

RoHS. UMCC Ultraminiature Coax Connector & Cable Assembly Series. Ready DESCRIPTION RoHS Ready UMCC Ultraminiature Coax Connector & Cable Assembly Series DESCRIPTION Tyco Electronics introduces the Ultraminiature Coax Connector and Cable Assembly series products. The UMCC series is an

More information

.093 [2.36] Commercial Pin and Socket Connectors

.093 [2.36] Commercial Pin and Socket Connectors Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting

More information

Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts

Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according

More information

PTS645 Series 6 mm Tact Switches

PTS645 Series 6 mm Tact Switches PTS5 Series mm Tact Switches Features/enefits Compact size x mm Variety of actuator lengths Choice of actuation force RoHS compliant and compatible Typical Applications Consumer products Instrumentation

More information

edac Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference EJ/1115/V2

edac Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference EJ/1115/V2 edac EJ/1115/V2 Magnetic and Modular RJ45 Jacks Connect with Us... Experience Makes the Difference edac Our Capabilities We have been designing and manufacturing interconnect products for over 50 years.

More information

The SMT/QuickGrip VSWR

The SMT/QuickGrip VSWR Connectors Product Facts Solderless Cable Termination [.118] Mated Height Excellent Cable Retention Usable With Flexible and Semi-Rigid Micro-Coaxial Cables Tape and Reel Packaging system. The design provides

More information

SIMPLE WIRE-PRESS CONNECTORS (AXF1, 2)

SIMPLE WIRE-PRESS CONNECTORS (AXF1, 2) SIMPLE WIRE-PRESS CONNECTORS SIMPLE WIRE-PRESS CONNECTORS (Compliant with e-con) New Wire connection plug 2. The structure is designed to temporarily hold inserted wires before crimping, allowing for high

More information

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES

1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES POWER RELAY 1 POLE 5 A (CADMIUM FREE CONTACTS TYPE) NY SERIES RoHS compliant FEATURES Ultra slim type with 5 mm thickness Good for high density mounting Low power consumption and high sensitivity Nominal

More information

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing.

Product shall be of the design, construction and physical dimensions specified on the applicable product drawing. Product Specification 108-1403 07Nov08 Rev A All Paragraphs Revised AMPOWER* Wave Crimp System Self-Aligning Header and Receptacle Assemblies 1. SCOPE 1.1. Content This specification covers performance,

More information

I-PEX MHF4 Micro Coaxial Connector

I-PEX MHF4 Micro Coaxial Connector PRODUCT SPECIFICATION I-PEX MHF4 Micro Coaxial Connector Plug P/N 20448-001R-81 Receptacle P/N 20449-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376

More information

MICRO COAXIAL CONNECTOR

MICRO COAXIAL CONNECTOR MICRO COAXIAL CONNECTOR Applicable for IEEE802.11a/b/g/n, UWB, WiMAX, Bluetooth, iburst, ZigBee and MIMO(Multiple Input and multiple output) RoHS Compliance Halogen - Free *1 MHF SERIES Easy Cable termination

More information

08. SEK IDC CONNECTORS

08. SEK IDC CONNECTORS . IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these

More information

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.

More information

POWER/SIGNAL HYBRID MICRO-D CONNECTORS

POWER/SIGNAL HYBRID MICRO-D CONNECTORS POWER/SIGNAL HYBRID MICRO-D CONNECTORS Omnetics high reliability Micro-D connectors are available with mixed power/signal contact layouts. The number of power and signal contacts may be specified to provide

More information

8D with High Frequency Coaxial Contact

8D with High Frequency Coaxial Contact 8D Series M Coaxial Contacts 8D with High Frequency Coaxial Contact robust and powerfull coaxial High Frequency transmission (M) now available in any size 8 SOURIU insert of D38999 Series III. Spring HF

More information

QMA Connectors. RF Coax Connectors. Snap-On SMA Series of RF Connectors Product Facts

QMA Connectors. RF Coax Connectors. Snap-On SMA Series of RF Connectors Product Facts QMA Connectors Snap-On SMA Series of RF Connectors Product Facts Positive snap-on interface facilitates assembly Intermateable with competitor product Excellent RF performance to 6 GHz Ideal for Communications

More information

PCB TYPE CONNECTORS (AXP)

PCB TYPE CONNECTORS (AXP) AXP FOR PC BOARD TO FLAT CABLE PCB TYPE CONNECTORS (AXP) Low profile 5.7mm Mini-dip type IC type FEATURES 1. High density mounting can be done. Because of its 5.7mm high and low profile, its effectiveness

More information

SMASH The high density interconnect system for harsh environment applications

SMASH The high density interconnect system for harsh environment applications 66 Amphenol Board Level Interconnect products SMASH The high density interconnect system for harsh environment applications The SMASH connector offers extremely high robustness where signal integrity is

More information

Universal MATE-N-LOK Connectors

Universal MATE-N-LOK Connectors Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00

More information

Outside Plant Precision Cooling Site Monitoring and Services

Outside Plant Precision Cooling Site Monitoring and Services Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity

More information

Make sure that the MUTE button on your phone is depressed during the voice explanations.

Make sure that the MUTE button on your phone is depressed during the voice explanations. Make sure that the MUTE button on your phone is depressed during the voice explanations. 1 What will we talk about Contact pitch 2 mm and smaller Contact pitch larger than 2.5 mm DF19 ( 1 mm pitch ) DF20

More information

Welcome to the Hirose Board-to-Board and Board-to-FPC Connector Product Training Module (PTM). This module is intended to introduce the various

Welcome to the Hirose Board-to-Board and Board-to-FPC Connector Product Training Module (PTM). This module is intended to introduce the various Welcome to the Hirose Board-to-Board and Board-to-FPC Connector Product Training Module (PTM). This module is intended to introduce the various connectors manufactured by Hirose and to discuss some of

More information

SB 175 Connectors - up to 280 Amps

SB 175 Connectors - up to 280 Amps Connectors - up to 280 Amps 2 Pole Wires sizes from #12 (3.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB series. The 3 pole adds an additional position for power or grounding.

More information

400 Series - Mini USB Buccaneer

400 Series - Mini USB Buccaneer IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,

More information

A8GS-T Minimum size class in the industry Remote Reset Rocker Switch with Delay OFF Function

A8GS-T Minimum size class in the industry Remote Reset Rocker Switch with Delay OFF Function New Product Delay Rocker Switch A8GS-T Minimum size class in the industry Remote Reset Rocker Switch with Delay Function Rocker switch with Delay Function. Switch is kept to turn, even if button is operated

More information

SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 )

SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) Rotor. Wiper. Cover. Pin S T - 2 T A 1 0 0 Ω ( 1 0 1 ) SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) COPAL ELECTRONICS RoHS compliant INTERNAL STRUCTURE 8 4 7! 5! 9 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7

More information

DDR4 DIMM Sockets, Halogen-free

DDR4 DIMM Sockets, Halogen-free Available in Press-fit, SMT and Through-hole mounting, sockets offer significant assemblyprocessing compatibility and cost savings in high-speed server memory applications Meeting JEDEC specifications,

More information

Anti-Sulfurated Thick Film Chip Resistors 0402, 0603, 0805, 1210

Anti-Sulfurated Thick Film Chip Resistors 0402, 0603, 0805, 1210 Anti-Sulfurated Thick Film Chip Resistors 42, 63, 85, 121 : ERJ S2, S3, S6, S14 Auti-Sulfurated Thick Film Chip Resistors n Features l The chip resistor with a special construction to avoid open failure

More information

SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version

SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These

More information

Battery Interconnects

Battery Interconnects Battery Interconnects Product Facts Total interface solution Current capacity 7 Amps/ single contact at 30 C T-Rise Choice of right-angle or vertical mount headers with left, right or keyless polarization

More information

AMPSEAL* Automotive Plug Connector and Header Assembly

AMPSEAL* Automotive Plug Connector and Header Assembly AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2

More information

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type "K" only)

1 POLE - 16A 80A Inrush type. (b) Contact configuration A : 1 form A (SPST-NO) C : 1 form C (SPDT) (standard type K only) FTR-K1 SERIES POWER RELAY 1 POLE - 16A 80A Inrush type FTR-K1 Series FEATURES Peak 80A inrush current (1 form A type) Low profile (height: 15.7mm) HIGH INSULATION Insulation distance (between coil and

More information

1 POLE - 5A SLIM POWER RELAY

1 POLE - 5A SLIM POWER RELAY POWER RELAY POLE - A SLIM POWER RELAY FTR-MY Series RoHS compliant FEATURES Width mm, height mm,(% smaller than NY series) area mm, super slim, low power, compact and light weight.gr. Nominal power: mw

More information

Quadrax for Full Duplex Ethernet Link

Quadrax for Full Duplex Ethernet Link 8D Series Quadrax Contacts Quadrax for Full Duplex Ethernet Link Quadrax contacts with robust MIL-DTL-38999 compliant screw coupling system for networks and high vibration environments. High speed One

More information

ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant

ST-2 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) FEATURES PART NUMBER DESIGNATION S T - 2 T A 1 0 0 Ω ( 1 0 1 ) RoHS compliant SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 8 4 7 FEATURES RoHS compliant Compact and low-profile mm single turn type Sealed construction 4 5 7 8 9!! 5 Part name Housing

More information

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions

More information

2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J circuits 3 to 20 circuits

2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J circuits 3 to 20 circuits XH CONNECTOR Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape 5 JST The XH connector was developed based on the high reliability and versatility of our NH series connectors. The

More information

APPROVAL SHEET MANUFACTURE SIGNATURE CUSTOMER SIGNATURE DATE: 09/03/09 DATE: 09/03/09 DATE: 09/03/09 DATE:

APPROVAL SHEET MANUFACTURE SIGNATURE CUSTOMER SIGNATURE DATE: 09/03/09 DATE: 09/03/09 DATE: 09/03/09 DATE: APPROVAL SHEET CUSTOMER: PART NAME: Mini PCI Express Connector PART NO.: CUSTOMER P/N: MANUFACTURE SIGNATURE SALES REP. R&D DEPT. QA DEPT. CUSTOMER SIGNATURE Jeff 万军 Sally liu DATE: 09/0/09 DATE: 09/0/09

More information

SSL - Cable Plug. Series 9159 APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER XXX

SSL - Cable Plug. Series 9159 APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER XXX The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring

More information

DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant

DISCONTINUED (1998) MINIATURE RELAY 1 POLE 1 to 2 A (FOR SIGNAL SWITCHING) FBR211 SERIES. RoHS compliant MINIATURE RELAY POLE to 2 A (FOR SIGNAL SWITCHING) FBR2 SERIES RoHS compliant FEATURES 2 A maximum carrying current Capable of 2 A maximum continuous carrying current in the contact Superior reliability

More information

A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant

A SERIES. 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) MINIATURE RELAY. RoHS compliant MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) A SERIES RoHS compliant FEATURES Extremely low profile and light weight Height: 5 mm Weight: approximately 1.2 g Meet FCC (Part 68) standard Conforms

More information

Board-to-Cable Connector for High-speed Transmission HD Series Connector

Board-to-Cable Connector for High-speed Transmission HD Series Connector COMPONENTS PRODUCT INFORMATION NEW Board-to-Cable Connector for High-speed Transmission HD Series Connector CONNECTOR MB-0247-1 June 2012 RoHS Compliant Features 40 position 30 position JAE has recently

More information

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0. ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)

More information

Coaxial Line Stretchers

Coaxial Line Stretchers All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Flexibility. Housing. GRID Chevron grid Staggered grid. NUMBER OF ROWS 6 rows / 8 rows. For specific pitches or arrangements, consult us.

Flexibility. Housing. GRID Chevron grid Staggered grid. NUMBER OF ROWS 6 rows / 8 rows. For specific pitches or arrangements, consult us. 58 Interconnect products SMASH Advanced SEM E modular connector The SMASH connector offers extremely high robustness where signal integrity is required. Based on an aluminium shell with 1, 2 or 3 bays,

More information

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C

1 POLE - 16A / Inrush 120A relay. (a) Relay type FTR-K1 : FTR-K1 Series (b) Contact configuration A : 1 form A C : 1 form C FTR-K1 SERIES POWER RELAY 1 POLE - 16A / Inrush 120A relay FTR-K1-KS Series FEATURES 1 pole 16A, 1 form A or 1 form C Peak inrush current 120A / TV-8 Coil power 400mW High insulation in small package (between

More information

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors .4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted

More information

Physical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C

Physical. Electrical. Environmental. Insulation: Contact: Plating: Temperature Rating: -55 C to +85 C M I/O Interconnect System 2.0 mm for IEEE 194 Wiremount Receptacle (Female) E206 Series Designed to mate to all M I/O Interconnect System 2.0 mm for IEEE 194 Boardmount Plugs Polarized to provide proper

More information

A8GS Minimum size class in the industry Rocker switch with reset function

A8GS Minimum size class in the industry Rocker switch with reset function New Product Remote Reset Rocker Switch A8GS Minimum size class in the industry Rocker switch with reset function Zero standby power by Reset function. High inrushcurrent durability. Conforming to TV8 rating.

More information

February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA]

February 2015. Chip Beads. For power line. HF-ACC Series. HFxxACC3216. * Dimensions Code JIS[EIA] E M C C o m p o n e n t s February 2015 Chip Beads For power line HF-ACC Series HFxxACC3216 [1206 inch]* * Dimensions Code JIS[EIA] (2/8) REMINDERS FOR USING THESE PRODUCTS Before using these products,

More information

Design Objective. USB Type-C Connector. 15-Otc-2015 Rev 3

Design Objective. USB Type-C Connector. 15-Otc-2015 Rev 3 15-Otc-2015 Rev 3 USB Type-C Connector 1 Scope : 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of TE Connectivity USB type

More information

µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex

µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance

More information

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement

XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can

More information