Seals the curtain ends. Includes 1 square steel mounting frame, loretex curtain material, and hardware Sidewall Retaining System 8

Transcription

1 CURTAINS Roll-Up Curtains - Center Roll Designed for greenhouses with taller gutter heights and is normally used on sidewalls and endwalls for ventilation. The curtain is motorized with a counter balance gear motor and includes a steel rolling tube and hardware. Growers can control the curtain with thermostats or automated environmental controllers. In addition, it can be opened incrementally with the proper controls Center Roll Curtain System Used in openings to 10. Has a unique aluminum rolling tube located in the center of the system with a weighted pipe at the bottom to eliminate billowing. Applicable for use on the RB+ or System Includes aluminum rolling tube, tube splices, bottom weight tube and hardware. Intended for motorization (sold separately) but can be operated manually. Requires poly material & eave and base extrusions Mount Assembly Includes gear motor mounting kit (motor sold separately), counter weight assembly and mounting assembly to curtain Rainbow Plus End Baffle Seals the curtain ends. Includes 1 square steel mounting frame, loretex curtain material, and hardware Sidewall Retaining System 8 Uses 1 round steel tube placed 6 on center to secure the curtain system. Includes mounting hardware Curtain Skirt Seals roll-up curtains at the base. Includes poly material, cable ties, monofilament and end clamps. Requires additional base extrusions and Polylock. Center Roll curtain applications

2 Roll-Up Curtains -Even Roll This system is designed for any type of greenhouse sidewall and endwall. It rolls from the bottom with a hand crank, though motorization options are available. The Even Roll curtain system includes an aluminum rolling tube, stainless steel Polylock-with-a-twist wire and rolling tube splices Even Roll Curtain Includes aluminum rolling tube, wire insert and rolling tube splices. System PowerHouse End Baffle Seal the curtain ends on your PowerHouse or other Quonset growing houses. Includes reinforced poly and mounting hardware Rainbow Plus End Baffle Seals the curtain ends. Includes 1 square steel mounting frame, loretex curtain material, and hardware PowerHouse Retaining System Uses UV resistant retaining straps to secure your curtain. The straps retain the curtain and aid the rolling of the curtain materials. Straps are placed 6 on center to secure the curtain Sidewall Retaining System 8 system. Includes mounting hardware. Uses 1 round steel tube placed 6 on center to secure the curtain system. Includes mounting hardware Curtain Skirt Seals roll-up curtains at the base. Includes poly material, cable ties, monofilament and end clamps. Requires additional base extrusions and Polylock. Even Roll curtain applications

3 Roll-Up Curtains- System Components Item # Description Even Roll Bottom Roller Rainbow Plus Roll-Up Curtain Crank with Adaptor P3263 Roll-Up Curtain Crank Assembly Only P3238 Snap-Lock Crank Handle 8 P32381 Snap-Lock Crank Handle 5 Telescoping Curtain Make your greenhouse more efficient by automating your roll up curtains. Ideal for sidewall or endwall curtains measuring between 60 and 160 feet long, these roll up shafts for fixed motors are built to last. Drop Curtains These curtain systems are an excellent way to ventilate greenhouses and Stuppy makes using them easy by configuring the curtains for sidewall and endwall use. In open position, our drop curtains allow for natural ventilation, saving you energy dollars. And when in closed position, they allow growers to use automatic ventilation and cooling equipment when needed.

4 Curtain Corner Covers NOTE: Corners are for use ONLY with drop curtain systems. Item # Description Outside Corner Cover Inside Corner Cover (Right) Inside Corner Cover (Left) Outside Corner Cover Inside Corner Cover (Right) Inside Corner Cover (Left) Rainbow Plus Winch Stations Note: Winch stations are for use ONLY with drop curtain systems. Includes 1.90 O.D., 14-gauge pipe, 9 6, pulley assembly, and winch with brake and hardware Winch Station, In-Ground, Sidewall Mount up to Winch Station, In-Ground, Endwall Mount up to Winch Station, Above Ground, 6 Sidewall Winch Station, Above Ground, 8 Sidewall Drop Curtain Extrusions Polylock Curtain Top 16 Lengths Polylock Curtain Eave Endwall 16 Lengths Polylock Curtain Eave Sidewall 12 Lengths Curtain Coverings Item # Description Unit of Measure x Custom Length Sq. Ft x Custom Length Sq. Ft x Custom Length Sq. Ft x Custom Length Sq. Ft. Loretex FSC 1000 UV x Custom Length Sq. Ft. Curtain Material 2503 Custom width x Custom Length Sq. Ft Loretex Hem Charge (3.5 /1.66 Pipe) L. Ft 2507 Loretex Repair Tape Each 2509 Grommets Each 2516 Griffolyn TX mil Clear 6 Sq. Ft Griffolyn T55 6mil Black/White Sq. Ft Griffolyn 6mil Clear 4 Sq. Ft.

5 Drop Curtain Components 1090 Polylock Baseboard 12 Aluminum Used as a baseboard for attaching roof or sidewall polyethylene on ground to ground or raised sidewall greenhouses. Designed to span 4 between supports or attach to a continuous support. Requires one 1000 Girt/Baseboard Splice 6 run of Mark III inserts (#1044). Used to splice lengths of Aluminum Girt (#1001) and Polylock Baseboard (#1090). Requires four Tec Screws (#1231) per splice Poly Fiber Splice w/ Twist 16 Used when transitioning from poly to rigid covering on sides or ends. Requires wire (#10082) Polylock Curtain Top Curtain Eave Polylock w/ Twist 12 Used as a cent member on curtain. Mate piece to Curtain Eave (#10254) and Capped Curtain Extrusion (#P2568). Pieces are spliced together using 6 splice and secured with Tec Screws and hung by cable attached to winch assembly. Used for eave members on Rainbow Plus sidewall. Attaches at every L connector flange with two 5/16 x1 Hex Head Bolt (#1340) with locknuts. Requires one run of Mark III inserts (#1044) Curtain Eave Spacer Corner spacer for #10254 curtain eave (3-3/8 ) P2568 Capped Curtain Extrusion 16 Used on Rainbow Plus endwalls with rigid covering. Spliced together with Wing Leading Edge Splice (#10286) and secured with 5/16 x3/4 carriage bolts (#1338) Curtain Eave End Wall 16 Used on Rainbow Plus Endwall (1.90 vertical). Requires one run of Mark III inserts (#1044) Mark III w/ Beige Vinyl Replacement Beige Vinyl Replacement Black Vinyl 1026 Polylock Installation Tool Designed with soft vinyl nose-piece (beige is standard). Makes securing one or more layers of poly film or shade fabric east even if wrinkles are present. Standard-Beige for double poly film layer. Oversized for single poly. Used to install and remove inserts. Two required Utility Cable Steel, Galvanized cable 1/8 7x7 main Note: Use for lengths up to Main Cable Steel, Galvanized cable 3/16" 7x7 main Note: Use for lengths over Cable Steel, Galvanized cable 1/4 7x7 main Curtain Strap Black polypropylene 2-3/4 x Curtain Strap Black polypropylene 2-3/4 x Curtain Strap Clamp 1.75" Requires one run of Mark III inserts.

6 10286 Wing Leading Edge Splice 1038 Roller Retainer Bracket 1-1/ Outside Retainer Bracket 6" Splice 1x1x1/8 Used for curtain eave extrusion (#10252) only. Keeps cable from sliding off of the roller P1571 Stainless Steel Axle 3/8"O.D. x 7/8" long 1383 Curtain Tiller Clamp Clamps onto a wire cable, acts as a stop for the cable hooks cable to curtain top 1389 Aluminum Ferrule 3/16 x 1/8" For curtains over 150 Z1203 Nylon Bushing.625 O.D. x.380 I.D. For Curtain Eave Extrusion (#10252) only. P1513 Alum Stop Sleeve For 1/8 cable