Water & Wastewater Coatings & Linings Environmentally Friendly Coatings Protection From Collection to Storage

Transcription

1 Water & Wastewater Coatings & Linings Environmentally Friendly Coatings Protection From Collection to Storage Coatings - Linings - Fireproofing

2 Collections & Transportation Manholes, Fittings, Penstocks, Pipes, Pump Stations, Valves, and Wet Wells Increasing levels of hydrogen sulfide and various loading parameters have led to cracking and corrosion in manholes, sewer interceptors and lift stations. Coatings with hydrogen sulfide resistance and dynamic crack bridging capabilities are necessary to restore the wastewater infrastructure Carboline offers manhole restoration systems that not only restore deteriorated structures but also provide superior performance that will handle these more aggressive conditions down the road. High performance coatings using advanced technologies can restore and preserve structures from further breakdown with peace of mind protection. Concrete Restoration Products: Carboguard 510 Series Carboguard 510 Series is an epoxy modified cementitious mortar that can be sprayed. This product is a high performance aggregate filled reinforced mortar designed for resurfacing, patching and filling voids, honeycombs, and bug holes in concrete. Carbocrete 522 Carbocrete 522 is a spray-grade, economical, shrinkage-compensated, repair mortar, and surfacing compound that exhibits excellent bond strength to concrete. It is ideally suited for substrate resurfacing concrete and waterproofing barrier and can be topcoated by Carboline s lining systems. Reinforced Durable Epoxy Linings for Severe Service: Plasite 5371 Series Plasite linings have a long reputation for outstanding chemical resistance and long term performance. The Plasite 5371 Series epoxies provide a tough, durable protective barrier between your concrete and waste streams. Plasite 4500 Series Plasite 4500 solvent-free epoxy series have wide versatility over both steel and concrete substrates as single-coat, ultra high-build coatings with excellent chemical resistance. Plasite 4550 Series The Plasite 4550 Series high performance epoxy novolac linings offers a significant step up in aggressive chemical resistance in a solvent-free technology, single-coat system, that is not only environmentally friendly; but also friendly to your bottom line. Rapid Curing Polyureas, Polyurethanes, and Hybrids: Polyclad Series Polyclad 777, 767, and 757 are Carboline s family of high performance structural polyurethane coatings. These coatings are used for corrosion protection of steel, ductile iron, and concrete pipelines. Reactamine Series A family of products that includes aromatic polyurea and polyurethane hybrid elastomeric coatings. This product line provides protection against corrosion caused by hydrogen sulfide and microbiological induced corrosion. Reactamine has excellent barrier properties with extreme abrasion resistance properties. Those features combined with fast-cure capabilities makes Reactamine an excellent choice for wastewater service.

3 Wastewater Treatment Aeration Tanks, Bar Screens, Chemical Storage, Clarifiers, Digesters, Secondary Containment, Grit Tanks, Headworks, Settling Tanks, and Trickle Filter Specialized manufacturing processes require individualized wastewater treatment procedures. Denitrification, ph adjustments and heavy metal removal are just a few of the procedures which demand corrosion control solutions. Carboline offers a wide breadth of products to protect waste water treatment structures from abrasive conditions and severe chemical exposure. There is no single product to handle all conditions from a performance or economic standpoint. That is why proper product selection and history of performance are so important when selecting the right product for the right requirement. Water Immersion Coatings: Bitumastic 300 Series Bitumastic Series coal-tar epoxies have a very long history of use in wastewater exposures and continue to offer the user one of the most cost-effective solutions. Carboguard Series Versatile epoxy products with excellent chemical protection and easy application properties. Reactamine Series A family of products that includes aromatic polyurea and polyurethane hybrid elastomeric coatings. This product line provides protection against corrosion caused by hydrogen sulfide and microbiological induced corrosion. Reactamine has excellent barrier properties with extreme abrasion resistance properties. Those features combined with fast-cure capabilities makes Reactamine an excellent choice for wastewater service. Chemical Resistant Linings: Plasite 4550 Series The Plasite 4550 Series high performance epoxy novolac linings offers a significant step up in aggressive chemical resistance in a solvent-free technology, single-coat system, that is not only environmentally friendly; but also friendly to your bottom line. Secondary Containment: Semstone Series The eco-friendly Semstone Series of secondary containment coatings protects your concrete surfaces from chemical attack and prevents toxic chemicals from infiltrating the soil or ground water. Reactamine Series A family of products that includes aromatic polyurea and polyurethane hybrid elastomeric coatings. This product line provides protection against corrosion caused by hydrogen sulfide and microbiological induced corrosion. Reactamine has excellent barrier properties with extreme abrasion resistance properties. Those features combined with fast-cure capabilities makes Reactamine an excellent choice for wastewater service.

4 Water Storage Interior & Exterior Tanks (Steel or Concrete), & Dam Gates Atmospheric corrosion and years of continuous use create the need for ultra durable, high performance coatings for steel and concrete water tanks. Interior linings need certification per ANSI / NSF Standard 61 as well as maintenance free extended service lives. Carboline offers durable ultra-weatherable finishes for exterior of both above and below ground water storage. There are a variety of solutions to meet the various application demands such as low temperature cure products, surface tolerant mastics as well as moisture tolerant coatings to meet your design and application needs. Carboguard Series Versatile epoxy products with excellent chemical protection and easy application properties. Phenoline 341 Series A solvent-less, epoxy lining for water, potable water, and wastewater. It is acceptable for use as a lining for potable water tanks 75 gallons or larger and pipe diameters 16 inches or larger. Reactamine 760 Reactamine elastomeric urethane provides both a water/wastewater resistant barrier and crack-bridging capability over concrete surfaces. Extreme abrasion resistant properties with fast-cure capability makes Reactamine quite versatile and popular in these exposures. Corrosion Resistant Primers For New Construction & Maintenance: Carbozinc Series Zinc rich primers that protect through galvanic action for long-term corrosion protection. Carbomastic Series High build surface tolerant epoxy mastics with excellent adhesion over rusted surfaces and old coatings providing long-term corrosion protection. Weathering Finishes: Carbothane Series Polyurethane finish coats available in a wide variety of colors. Carbothane products provide excellent color and gloss retention. Carboxane Series Ultra-durable weathering finishes providing the ultimate in color and gloss retention far superior to the best formulated polyurethanes. Includes flurourethane and polysiloxane coatings for long term protection. Carbocrylic Series Advanced waterborne and low VOC acrylic technology with the weathering and chemical performance of solvent based systems.

5 Proven Products from an Industry Leader Industry Leader Carboline has been a leader in the industrial paint, coatings and linings since Our comprehensive product line offers many different solutions for a variety of applications. Carboline s highly regarded product lines are well established in the Water Storage industry. With a team of individuals focused on the needs of the Water and Wastewater industry, Carboline has the experience to service all of your coatings needs. Product Line Carboline offers products for EVERY stage of Water and Wastewater management, from high performance coatings for exteriors of steel and concrete tanks, and interior linings for water and highly corrosive chemical storage, to coatings and linings for pipes and valves. Some of the advantages to using our products include: UL and NSF certified / approved products ISO Certified Since 1993 Industry Leading 100% Solids Technology VOC and HAP s Free Coating Solutions Direct To Metal (DTM) Products Ease of Application and Fast Curing Excellent Weathering Excellent Corrosion and Chemical Resistance FDA Compliant Carboline s goal is to offer coatings that are easy to use by the applicator, and provide long lasting protection for the owner. Contact us:

6 Global Leader in Service and Support Coatings - Linings - Fireproofing GLOBAL REPRESENTATION Sales offices and service centers Quality Products Backed by Quality Service Carboline Company has been solving tough corrosion and fireproofing problems since 1947 Major service centers and sales offices located around the world Over 20 worldwide manufacturing locations with a global network of sales and technical support Industry leading field service and technical engineering support team Over 40 different coatings technologies, representing over 500 active products Certified to ISO 9001

7 Coatings - Linings - Fireproofing Carboline Company 2150 Schuetz Road St. Louis, MO USA PH: