Ediz.: Issue: Firma Signature. Data Date. Sardo G. (DT/MT/) ASI 1 x
|
|
|
- Delphia Maxwell
- 8 years ago
- Views:
Transcription
1 Tipo Doc.: Doc.Type: N Doc.: Doc. N : PROCEDURE N DRD: DRD N : NA Di Of Titolo : Title : Preparato da: Prepared by: Nome & Funzione Name & Function Zambra R (DT/MT/) Firma Signature Data Date LISTA DI DISTRIBUZIONE DISTRIBUTION LIST Interna / Internal N A I Approvato da: Approved by: Cinquepalmi C. (PC/CC/) Legraman S. (PA/SF) Molina M. (DT/MT/) Olivier M. (DT/MT/) Applicazione autorizzata da: Application authorized by: Sardo G. (DT/MT/) Esterna / External ASI x Customer / Higher Level Contractor Accettato da: Accepted by: Approvato da: Approved by: N=Numero copie A=Applicazione I=Informazione N=Number copy A=Application I=Information Gestione documenti: Data Management: Firma / Signature Data / Date File: _issue_.doc Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA: Tutti i ritti sono riservati All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
2 2 EDIZIONE ISSUE DATA DATE REGISTRAZIONE DELLE MODIFICHE / CHANGE RECORD AUTORIZZAZIONE CHANGE AUTHORITY First emission OGGETTO DELLA MODIFICA E SEZIONI AFFETTE REASON FOR CHANGE AND AFFECTED SECTIONS Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
3 3 LISTA DELLE PAGINE VALIDE / LIST OF VALID PAGES PAGINA PAGE EDIZIONE ISSUE PAGINA PAGE EDIZIONE ISSUE PAGINA PAGE EDIZIONE ISSUE PAGINA PAGE EDIZIONE ISSUE PAGINA PAGE EDIZIONE ISSUE - Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
4 4 TABLE OF CONTENT LIST OF TABLES...5 LIST OF FIGURES...5. SCOPE DOCUMENTS APPLICABLE DOCUMENTS REFERENCE DOCUMENTS ACRONYMS TESTED ITEMS TEST OBJECTIVE FACILITY DESCRIPTION TEST SETUP SHAKER CHARACTERISTICS SLIDING TABLE CHARACTERISTICS FIXTURE CHARACTERISTICS ACCELEROMETER CHARACTERISTICS TEST CONDITIONS TEST RESPONSIBILITY SUCCESS CRITERIA OPERATIONAL RESTRICTIONS PARTICIPANTS REQUIRED GENERAL QA WITNESS OF TESTS AND SIGN-OFF NON-CONFORMANCE AND FAILURES CALIBRATION REQUIREMENTS MEASUREMENT ACCURACY TEST PROCEDURE VARIATION SHEET GENERAL PROCEDURE TEST LEVELS RANDOM TEST LEVEL TEST LEVEL FOR RESONANCE SEARCH UUT ACCELEROMETER DISPOSITION: RICH FM FLOWCHART: VIBRATION TEST PROCEDURE (STEP BY STEP) Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
5 5 LIST OF TABLES Table 9-: Success criteria... 2 Table 6-: Maximum Expected Flight Levels for the Alpha Magnetic Spectrometer 02 X Axis... 6 Table 6-2: Maximum Expected Flight Levels for the Alpha Magnetic Spectrometer 02 Y Axis... 6 Table 6-3: Maximum Expected Flight Levels for the Alpha Magnetic Spectrometer 02 Z Axis... 6 Table 7-: Accelerometers sposition... 9 LIST OF FIGURES Figure 4-: Model the UUT...7 Figure 6-: Shaker in position for the X and Y rections test...8 Figure 6-2: Shaker in position for the Z rection test...8 Figure 6-3: Fixture Envelope...9 Figure 6-4: Fixture Pattern... 0 Figure 6-: Test Random Vibration Levels X, Y and Z axes... 7 Figure 7-: Pilot Accelerometers sposition... 9 Figure 7-2: Accelerometers sposition Figure 7-3: Accelerometers sposition Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
6 6. SCOPE This document defines the procedure to test the RICH SYSTEM FM for the vibration environment. Qualification the design shall be accomplished using Flight Model hardware. The objectives the test shall be to verify all the specified performance the hardware assembled with flight materials and components under applicable mechanical environment and I/F contions: - No structural yielng or failures. (AD ). - No functional degradation due to vibration loads (AD ). 2. DOCUMENTS 2. APPLICABLE DOCUMENTS AD # Document Number Issue/Date Rev. Title/Applicability JSC DEC, 200 B Alpha Magnetic Spectrometer 02 Structural Verification Plan for the Space Transportation System and the International Space Station 2.2 REFERENCE DOCUMENTS RD # Document Number Issue/Date Rev. Title/Applicability 3. ACRONYMS A.D. FEM FM I/F MEFL QM R.D. UUT APPLICABLE DOCUMENTS FINITE ELEMENT MODEL FLIGHT MODEL INTERFACE MAXIMUM EXPECTED FLIGHT LEVEL QUALIFICATION MODEL REFERENCE DOCUMENTS UNIT UNDER TEST Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
7 7 4. TESTED ITEMS Tested item, called UUT is: MODEL ITEM C.I. Drawing Number/Part Number S/N NOTES FM RICH-SYS - See Figure 4- Z X Figure 4-: Model the UUT Y For the UUT, mass property and envelope are: Mass: 80Kg Dimension: 405mm length, 40mm width and 69.4mm height Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
8 8 5. TEST OBJECTIVE This test is required to demonstrate the unit to withstand the MEFL, to verify the absence material-workmanship defects and to verify the requirements. The UUT shall be subject to a visual inspection. Functional check shall be performed before and after test campaign by the collaboration. 6. FACILITY DESCRIPTION The vibration tests shall be executed at an external laboratory in a proper area. 6. TEST SETUP A sketch the shaker and sling table is shown in the following figures Figure 6-: Shaker in position for the X and Y rections test Figure 6-2: Shaker in position for the Z rection test Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
9 9 6.2 SHAKER CHARACTERISTICS For Z rection vibration a shaker shall be used, for X and Y rection a sling table shall be used. The shaker and sling table characteristics shall be annexed to the test data report as provided by the test laboratory. 6.3 SLIDING TABLE CHARACTERISTICS For Z rection vibration a shaker shall be used, for X and Y rection a sling table shall be used. The shaker and sling table characteristics shall be annexed to the test data report as provided by the test laboratory. 6.4 FIXTURE CHARACTERISTICS The test adapter is designed to guarantee that the input vibration levels are transmitted from the exciter to the UUT without relevant amplification/degradation: the picture the fixture envelope is shown in Figure 6-3, and the pattern is shown in Figure mm 600mm 30mm Figure 6-3: Fixture Envelope Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
10 0 Figure 6-4: Fixture Pattern Threaded inserts for NAS 35-5 bolts shall be used. Threaded inserts length shall be 2d minimum. Fixture envelope is: Dimension: 600mm length, 600mm width and 30mm height. Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
11 6.5 ACCELEROMETER CHARACTERISTICS The accelerometer characteristics shall be annexed to the test data report as provided by the test laboratory. 7. TEST CONDITIONS The UUT shall be mounted on the vibrator exciter by bolting it onto a rigid fixture in launch configuration. The transmissibility characteristic the rigid fixture will guarantee that the input vibration levels are transmitted from the exciter to the unit without relevant amplification/degradation (Table 9-). The UUT shall be powered OFF for all the test duration. Unless otherwise specified, all the measurements are to be performed at the following ambient contions: Temperature: Relative humity: Pressure: Cleanliness 20 C ±5 C 60% ±20% RH Ambient Visibly clean 8. TEST RESPONSIBILITY CGS is responsible for the application all requirements stated in the applicable documents. The technical responsibilities for testing and test results is the Engineering department. Project and test managers are responsible for the test program. The test engineer is responsible for the correct execution the test program and for the fulfillment the requirements, for measurement and recorng and for the preparation the test report. Laboratories General sposition shall be applied to maximize personnel safety from potential hazards. Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
12 2 9. SUCCESS CRITERIA The random vibration tests shall be performed in the following way (for each axis): FM Fixture calibration Resonance search before random vibration WM level random vibration Resonance search after random vibration SUCCESS CRITERIA The transmissibility characteristic the rigid fixture will guarantee that the input vibration levels are transmitted from the exciter to the unit without relevant amplification/degradation. Cross talks shall not exceed the input Identification the first frequency No structural yielng or failure No performance degradation No screpancies wrt previous RS Table 9-: Success criteria Functional tests shall be carried out before and after the overall vibration test campaign. 0. OPERATIONAL RESTRICTIONS All used instruments shall meet the necessary accuracy and shall not degrade the UUT performance. Latex gloves will be used. Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
13 3. PARTICIPANTS REQUIRED. GENERAL All tests shall be performed under QA surveillance in accordance with and following detailed procedure CGS PA Plan. Skilled personnel shall be employed. The test shall be notified to the Customer as applicable..2 QA WITNESS OF TESTS AND SIGN-OFF QA inspector, or its delegate, shall witness all tests described in this procedure and shall sign the test data sheet, only for flight models. 2. NON-CONFORMANCE AND FAILURES Any malfunction occurred during the tests shall be processed accorng to the Non-Conformance Procedure. 3. CALIBRATION REQUIREMENTS All instruments used for testing shall be calibrated. Evidence certification shall be provided by a label attached to the instruments itself, showing the calibration date, the expire date and the signature the operator. Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
14 4 4. MEASUREMENT ACCURACY Test parameter tolerances shall be as follows: Resonance search. sweep rate = 2 oct/min ±5%. ( sweep-up and down ), amplitude g Random vibration. frequency: ±2% power spectral density: - 20 to 500 Hz (filter bandwidth 25 Hz or narrower) ±.5 db to 2000 Hz ±3.0 db - Overall g RMS ±.5 db 5. TEST PROCEDURE VARIATION SHEET In case that for any reason the test procedure has to be changed, the change shall be described in a Procedure Variation Sheet (PVS) as shown in the next page. The PVS shall contain: Reference to the test procedure to be changed Reference to the relevant test, procedure page and paragraph Description the change, possibly in the form was.is.. Reason for change Test Engineer, QA, Test conductor signatures and dates Customer signature and date (when required). Each PVS shall be identified by a reference number provided in sequential order. All the generated PVS shall be collected in a decated section the Test Report. Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
15 5 PROCEDURE VARIATION SHEET ref. N : Test Procedure Ref.: Revised: Paragraph Revised: Description Change: Reason for Change: CONCURRENCE Test Cond. QA System Eng. Customer Date Date Date Date Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
16 6 6. GENERAL PROCEDURE 6. TEST LEVELS In the next pages the complete test sequence to be followed during the test is reported. It shall be properly filled during test performance and form part - in adtion to test results and analysis - the relevant test report. 6.. RANDOM TEST LEVEL The Table 6-3 shows the Maximum Expected Flight Levels (MEFL) test environment for UUT (from AD) X Axis Frequency (Hz) PSD (g^2/hz) slope (db/oct.) Composite: 3. g RMS Duration: 60 sec Direction: X axis. Table 6-: Maximum Expected Flight Levels for the Alpha Magnetic Spectrometer 02 X Axis Y Axis Frequency (Hz) PSD (g^2/hz) slope (db/oct.) Composite: 2.3 g RMS Duration: 60 sec Direction: Y axis. Table 6-2: Maximum Expected Flight Levels for the Alpha Magnetic Spectrometer 02 Y Axis Z Axis Frequency (Hz) PSD (g^2/hz) slope (db/oct.) Composite: 3.2 g RMS Duration: 60 sec Direction: Z axis. Table 6-3: Maximum Expected Flight Levels for the Alpha Magnetic Spectrometer 02 Z Axis Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
17 7 TEST LEVELS PSD [g^2/hz] MEFL X Axis 3.2 grms MEFL Y Axis 2.28 grms MEFL Z Axis 3.24 grms FREQ [Hz] Figure 6-: Test Random Vibration Levels X, Y and Z axes Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
![000 0 00 000 0000 FREQ [Hz] Figure 6-: Test Random Vibration Levels X, Y and Z axes Questo](/docs-images/45/2442332/images/page_17.jpg "documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati.")
18 TEST LEVEL FOR RESONANCE SEARCH The program for the shaker is explained in the following operations: Linear Frequency Scan Band: HZ Scan Speed 2 oct/min (Sweep Up Only) Level 0.3 g (Peak) Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
19 9 7. UUT ACCELEROMETER DISPOSITION: SENSOR LOCATION DESCRIPTION MEASURED AXIS REFERNCE TO FIGURE REMARKS CP FIXTURE Excited axis Figure 7- Pilot CP 2 FIXTURE Excited axis Figure 7- Pilot MP UUT raators X, Y and Z Figure 7-2 MP 2 UUT external structure X, Y and Z Figure 7-2 MP 3 UUT external structure X, Y and Z Figure 7-2 MP 4 UUT reflector X, Y and Z Figure 7-3 Table 7-: Accelerometers sposition CP 2 CP Figure 7-: Pilot Accelerometers sposition Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
20 20 MP 3 MP 2 MP Z X Y Figure 7-2: Accelerometers sposition MP 4 Figure 7-3: Accelerometers sposition Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
21 2 8. RICH FM FLOWCHART: BEGIN FM FINAL INTEGRATION IN CIEMAT (MADRID) AND FUNCTIONAL TEST FUNCTIONAL TEST (CARRIED OUT BY COLLABORATION PERSONNEL) FM TRANSPORTATION TO TEST FACILITY VIBRATION TEST SETUP RESONANCE SEARCH BEFORE MEFL RANDOM ( X DIRECTION) MEFL RANDOM IN X DIRECTION RESONANCE SEARCH AFTER MEFL RANDOM ( X DIRECTION) RESONANCE SEARCH BEFORE MEFL RANDOM (Y DIRECTION) MEFL RANDOM IN Y DIRECTION RESONANCE SEARCH AFTER MEFL RANDOM (Y DIRECTION) VIBRATION TEST REPORT RESONANCE SEARCH BEFORE MEFL RANDOM ( Z DIRECTION) MEFL RANDOM IN Z DIRECTION RESONANCE SEARCH AFTER MEFL RANDOM ( Z DIRECTION) FM TRANSPORTATION TO CIEMAT (MADRID) FOR FUNCTIONAL TEST OK ON FUNCTIONALITY (ISSUED BY COLLABORATION PERSONNEL FUNCTIONAL TEST (CARRIED OUT BY COLLABORATION PERSONNEL END Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
22 22 9. VIBRATION TEST PROCEDURE (STEP BY STEP) This paragraph explains all the procedures that shall be performed on the models. Each test activity is defined in sequence and task by task, inclung measurement recorng to be made. In the sequence procedure is also contained the statement that the test article shall be tested in accordance with the approved procedure to be signed and dated by Test Conductor, Quality Assurance Representative and Customer Representative (where applicable). Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
23 23 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS. UUT QUALIFICATION VIBRATION TEST IN X DIRECTION.. RESONANCE SEARCH BEFORE MEFL RANDOM... SCREW THE FIXTURE TO THE SLIDING TABLE FOR VIBRATION IN X DIRECTION OK..2. INSTALL UUT ON FIXTURE FOR X DIRECTION VIBRATION (NAS 35-5 screw torque 35 Nm) OK..3. FIX CONTROL ACCELEROMETERS (CP) TO THE FIXTURE AS PER Figure 7- OK..4. FIX ACCELEROMETERS TO UUT AS PER Figure 7-2 AND Figure 7-3 OK..5. PERFORM A RESONANCE SEARCH (PROGRAM SHAKER ACCORDING TO 6..2 ) IF MULTIPOINT INPUT CONTROL IS USED SELECT HIGHEST POINT STRATEGY..6. ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
24 24 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS.2. MEFL RANDOM VIBRATION IN X DIRECTION.2.. PROGRAM SHAKER ACCORDING TO Table 6- OK IF MULTIPOINT INPUT CONTROL IS USED SELECT MAXIMUM POINT STRATEGY.2.2. PERFORM THE RANDOM VIBRATION TEST OK.2.3. VISUAL INSPECTION OF THE TEST ARTICLE.2.4. ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK No visual damages detected DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
25 25 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS.3. RESONANCE SEARCH AFTER MEFL RANDOM VIBRATION.3.. PERFORM A RESONANCE SEARCH AFTER RANDOM (PROGRAM SHAKER ACCORDING TO 6..2 ) See chap ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK.3.3. REMOVE UUT MOUNTED ACCELEROMETERS OK.3.4. CHECK I\F BOLTS TORQUE OK.3.5. REMOVE UUT FROM FIXTURE OK.3.6. REMOVE FIXTURE OK DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
26 26 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS 2. UUT QUALIFICATION VIBRATION TEST IN Y DIRECTION 2.. RESONANCE SEARCH BEFORE MEFL RANDOM 2... SCREW THE FIXTURE TO THE SLIDING TABLE FOR VIBRATION IN Y DIRECTION OK INSTALL UUT ON FIXTURE FOR Y DIRECTION VIBRATION (NAS 35-5 screw torque 35 Nm) OK FIX CONTROL ACCELEROMETERS (CP) TO THE FIXTURE AS PER Figure 7- OK FIX ACCELEROMETERS TO UUT AS PER Figure 7-2 AND Figure 7-3 OK PERFORM A RESONANCE SEARCH (PROGRAM SHAKER ACCORDING TO 6..2 ) IF MULTIPOINT INPUT CONTROL IS USED SELECT HIGHEST POINT STRATEGY ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
27 27 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS 2.2. MEFL RANDOM VIBRATION IN Y DIRECTION PROGRAM SHAKER ACCORDING TO Table 6-2 OK IF MULTIPOINT INPUT CONTROL IS USED SELECT MAXIMUM POINT STRATEGY PERFORM THE RANDOM VIBRATION TEST OK VISUAL INSPECTION OF THE TEST ARTICLE ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK No visual damages detected DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
28 28 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS 2.3. RESONANCE SEARCH AFTER MEFL RANDOM VIBRATION PERFORM A RESONANCE SEARCH AFTER RANDOM (PROGRAM SHAKER ACCORDING TO 6..2 ) See chap ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK REMOVE UUT MOUNTED ACCELEROMETERS OK CHECK I\F BOLTS TORQUE OK REMOVE UUT FROM FIXTURE OK REMOVE FIXTURE OK DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
29 29 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS 3. UUT QUALIFICATION VIBRATION TEST IN Z DIRECTION 3.. RESONANCE SEARCH BEFORE MEFL RANDOM 3... SCREW THE FIXTURE TO THE SLIDING TABLE FOR VIBRATION IN Z DIRECTION OK INSTALL UUT ON FIXTURE FOR Z DIRECTION VIBRATION (NAS 35-5 screw torque 35 Nm) OK FIX CONTROL ACCELEROMETERS (CP) TO THE FIXTURE AS PER Figure 7- OK FIX ACCELEROMETERS TO UUT AS PER Figure 7-2 AND Figure 7-3 OK PERFORM A RESONANCE SEARCH (PROGRAM SHAKER ACCORDING TO 6..2 ) IF MULTIPOINT INPUT CONTROL IS USED SELECT HIGHEST POINT STRATEGY ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
30 30 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS 3.2. MEFL RANDOM VIBRATION IN Z DIRECTION PROGRAM SHAKER ACCORDING TO Table 6-3 IF MULTIPOINT INPUT CONTROL IS USED SELECT MAXIMUM POINT STRATEGY OK PERFORM THE RANDOM VIBRATION TEST OK VISUAL INSPECTION OF THE TEST ARTICLE ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK No visual damages detected DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
31 TEST PROCEDURE REFERENCE TEST REPORT REFERENCE UUT DATA : Model Item C.I. S/N STEP n TEST SEQUENCE EXPECTED VALUE MEASURED VALUE REMARKS 3.3. RESONANCE SEARCH AFTER MEFL RANDOM VIBRATION PERFORM A RESONANCE SEARCH AFTER RANDOM (PROGRAM SHAKER ACCORDING TO 6..2 ) See chap ANNEX TO THE TEST REPORT THE RECORDING CHART AND SAVE FILE OK REMOVE UUT MOUNTED ACCELEROMETERS OK CHECK I\F BOLTS TORQUE OK REMOVE UUT FROM FIXTURE OK REMOVE FIXTURE OK DATE: TEST CONDUCTOR QA CUSTOMER Questo documento contiene informazioni proprietà CARLO GAVAZZI SPACE SpA. Tutti i ritti sono riservati. All information contained in this document are property CARLO GAVAZZI SPACE SpA. All right reserved.
EXECUTIVE SUMMARY TFD-TN-CGS-004
New Methods and Systems for Time and Frequency Distribution via Satellite Issue ESTEC Contract N. 1447/00/NL/PB Space Engineering S.p.A. TIME AND FREQUENCY Tipo Doc.: Doc.Type: N Doc.: Doc. N : TECHNICAL
Herschel PACS Test Procedure STM PACS-KT-PR-011 Issue: 1 Revision: -
CASE GmbH Westendstrasse 125 80339 München Herschel PACS Test Procedure STM 1 Revision: - i Document Approval Sheet Title: Herschel PACS Subtitle: Test Procedure STM Doc. No: 1 Revision: - Prepared:......
Ediz.: Issue: Firma Signature. Data Date 07/11/2014 07/11/2014 07/11/2014
Tipo Doc.: Doc.Type: N Doc.: Doc. N : TECHNICAL NOTE N DRD: DRD N : NA 1 Di Of Titolo: Title : Preparato da: Prepared by: Nome &Funzione Name & Function MWI Team Firma Signature Data Date LISTA DI DISTRIBUZIONE
Ediz.: Issue: draft GLASNOWMAP INFORMATION SERVICE - USER REQUIREMENTS DOCUMENT. Firma Signature. Data Date
Tipo Doc.: Doc.Type: N Doc.: Doc. N : Titolo : Title : N DRD: DRD N : 22-02-2002 NA - 1 Di Of 15 Nome & Funzione Name & Function Firma Signature Data Date LISTA DI DISTRIBUZIONE DISTRIBUTION LIST N A I
Ediz.: Issue: HERSCHEL DPUs/ICU PACS DPU UNIT DECLARED PROCESSES LIST. Firma Signature. Data Date. Ricciu A. (DP/OI) Conte M.
Tipo Doc.: Doc.Type: LIST DRD: DRD : A Doc.: Doc. : 1-01-005 Pagin a 1 Di Of 5 Titolo : Title : ome & Funzione ame & Function Firma Signature Data Date LISTA DI DISTRIBUZIOE DISTRIBUTIO LIST A I Preparato
SPECIFICATION ENVIRONMENTAL ACCEPTANCE TESTING
National Aeronautics and Space Administration Lyndon B. Johnson Space Center Houston, Texas 77058 REVISION C MAY 17, 2001 REPLACES REVISION B SPACE SHUTTLE SPECIFICATION ENVIRONMENTAL ACCEPTANCE TESTING
Vibration and Shock tests on a typical Current Transformer Set
Vibration and Shock tests on a typical Current Transformer Set FR409P11 Mastering Electricity www.eleq.com Nationaal Lucht- en Ruimtevaartlaboratorium National Aerospace Laboratory NLR NLR-CR-2009-412
MetOp-SG MWI. General Design and Interfaces Requirements for MWI reflectors and feed assemblies REGISTRAZIONE DELLE MODIFICHE / CHANGE RECORD
Ez.: 2 EDIZIONE ISSUE DATA DATE REGISTRAZIONE DELLE MODIFICHE / CHANGE RECORD AUTORIZZAZIONE CHANGE AUTHORITY First release OGGETTO DELLA MODIFICA E SEZIONI AFFETTE REASON FOR CHANGE AND AFFECTED SECTIONS
NON CLASSIFICATO (Unclassified)
FUNCTION/DEPARTMENT : BU Sistemi Comunicazione Professionali CAGE CODE: TIPO DOCUMENTO: DOCUMENT TYPE COMPOSTO DI PAGINE: COMPOSED OF PAGES 8 TITOLO: TITLE A N D W A R R A N T Y CODICE: CODE Ediz.: ISSUE
ENERGY STAR Program Requirements Product Specification for Data Center Storage. Draft 2 Test Method March 2013
ENERGY STAR Program Requirements Product Specification for Data Center Storage Draft 2 Test Method March 2013 1 2 3 4 1 OVERVIEW The following test method shall be used for determining compliance with
28924 Verbania Fondotoce (VB) Italia 29/04/2008 Page 1 of 5 CLIENTE Customer SHIELD s.r.l. Strada Provinciale, 21/A 28010 Cavaglietto (NO) COMMESSA Contract CO006908-23/04/2008 RAPPORTO DI PROVA Test Report
Similar benefits are also derived through modal testing of other space structures.
PAGE 1 OF 5 PREFERRED RELIABILITY PRACTICES MODAL TESTING: MEASURING DYNAMIC STRUCTURAL CHARACTERISTICS Practice: Modal testing is a structural testing practice that provides low levels of mechanical excitation
Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
Address for Correspondence
International Journal of Advanced Engineering Technology E-ISSN 0976-3945 Research Paper DEVELOPMENT OF LOW COST SHAKE TABLES AND INSTRUMENTATION SETUP FOR EARTHQUAKE ENGINEERING LABORATORY C. S. Sanghvi
RANDOM VIBRATION AN OVERVIEW by Barry Controls, Hopkinton, MA
RANDOM VIBRATION AN OVERVIEW by Barry Controls, Hopkinton, MA ABSTRACT Random vibration is becoming increasingly recognized as the most realistic method of simulating the dynamic environment of military
ISO/IEC 17025 QUALITY MANUAL
1800 NW 169 th Pl, Beaverton, OR 97006 Revision F Date: 9/18/06 PAGE 1 OF 18 TABLE OF CONTENTS Quality Manual Section Applicable ISO/IEC 17025:2005 clause(s) Page Quality Policy 4.2.2 3 Introduction 4
W1 Connector W1 Adapter W1 Termination
Data Sheet W1 Connector W1 Adapter W1 Termination DC to 110 GHz A complete coaxial connector system with mode-free performance to 110 GHz Features Excellent RF Performance to 110 GHz 50Ω Impedance Low
R&S ZCxxx Millimeter-Wave Converters Specifications
ZCxxx_dat-sw_en_3607-1471-22_v0200_cover.indd 1 Data Sheet 02.00 Test & Measurement R&S ZCxxx Millimeter-Wave Converters Specifications 21.07.2015 15:09:16 CONTENTS Definitions... 3 General information...
ENVIRONMENTAL TEST REPORT
INFN - Roma doc: UG crate FM - ESS date: 9/12/08 pag: 1 /12 ENVRPT33_S3019R-UG crate FM_ESS- date: December 09, 2008 Prot: 001-09/SERMS signature test report prepared by: test report controlled by: 09/12/08
Transducer Mounting and Test Setup Configurations. Rick Bono The Modal Shop
Transducer Mounting and Test Setup Configurations Rick Bono The Modal Shop 1 Transducer Mounting Mechanical connection method Stud mount Adhesive mount Magnetic mount Press-fit friction mount Test parameter
Methods to predict fatigue in CubeSat structures and mechanisms
Methods to predict fatigue in CubeSat structures and mechanisms By Walter Holemans (PSC), Floyd Azure (PSC) and Ryan Hevner (PSC) Page 1 Outline Problem Statement What is fatigue? Cyclic loading and strength
Design Validation and Improvement Study of HVAC Plumbing Line Assembly under Random Loading Condition
Design Validation and Improvement Study of HVAC Plumbing Line Assembly under Random Loading Condition Rakesh Jakhwal Senior Engineer Chrysler Group LLC RMZ Millenia II, Perungudi Chennai 600096, India
Keywords: Torque, calibration, uncertainty, torque tools, torque testers. Contents
Measurement uncertainty in torque calibration Luca G. Bochese, ASQ CQE, CRE (Boch - Milano), info@boch.net, www.boch.net Dr. A. Bochese ( Feanor - Tallinn), info@feanor.com, www.feanor.com Keywords: Torque,
AMP CO Plus Insert for Cat. 6 A Applications
Product Specification 108-93039 10/Mar/2011 Rev F AMP CO Plus Insert for Cat. 6 A Applications 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP* CO Plus
AE.MA.ASU.PL.008 Issue 02 Page 2 of 20 INTENTIONALLY BLANK
Page 2 of 20 INTENTIONALLY BLANK Page 3 of 20 CONTENTS CONTENTS...3 1. INTRODUCTION...5 2. APPLICABLE DOCUMENTS...5 3. OPERATION...6 3.1 General Description...6 3.2 Physical Data...6 3.3 Electrical Bonding...6
First Article Inspection (FAI) Training
First Article Inspection (FAI) Training What is the purpose an FAI? The purpose of the First Article Inspection is to provide objective evidence that all engineering design and specification requirements
102 26-m Antenna Subnet Telecommunications Interfaces
DSMS Telecommunications Link Design Handbook 26-m Antenna Subnet Telecommunications Interfaces Effective November 30, 2000 Document Owner: Approved by: Released by: [Signature on file in TMOD Library]
Measurement of RF Emissions from a Final Coat Electronics Corrosion Module
Engineering Test Report No. 37802-02 Rev. A Measurement of RF Emissions from a Final Coat Electronics Corrosion Module For : Canadian Auto Preservation, Inc. 390 Bradwick Drive Concord, Ontario CANADA
Comparison of the Response of a Simple Structure to Single Axis and Multiple Axis Random Vibration Inputs
Comparison of the Response of a Simple Structure to Single Axis and Multiple Axis Random Vibration Inputs Dan Gregory Sandia National Laboratories Albuquerque NM 87185 (505) 844-9743 Fernando Bitsie Sandia
TAC I/NETTM MR-VAV-AX. Application Specific MicroRegulator TM
TAC I/NETTM TM TAC s TM has an extensive range ofpre-engineered VAV control sequences, which combined with a fully integrated actuator and airflow transducer, makes it a low Total Installed Cost solution
AS9100 Quality Manual
Origination Date: August 14, 2009 Document Identifier: Quality Manual Revision Date: 8/5/2015 Revision Level: Q AS 9100 UNCONTROLLED IF PRINTED Page 1 of 17 1 Scope Advanced Companies (Advanced) has established
BOARD-LEVEL TEST PROCEDURE GYROSCOPE SUSPENSION SYSTEM (GSS) HV AMPLIFIER AND BRIDGE (HVA) ASSEMBLY. GP-B Procedure P0829 Rev A
P0829 Rev. A September 26, 2001 W. W. Hansen Experimental Physics Laboratory STANFORD UNIVERSITY STANFORD, CALIFORNIA 94305-4085 Gravity Probe B Relativity Mission BOARD-LEVEL TEST PROCEDURE GYROSCOPE
Testing of 10 GHz Instantaneous Bandwidth RF Spectrum Monitoring at Idaho National Labs
Testing of 10 GHz Instantaneous Bandwidth RF Spectrum Monitoring at Idaho National Labs Scott H. Bekker, Aaron S. Traxinger, Colton R. Stiffler, Alex J. Woidtke, Michael D. Chase, Wm. Randall Babbitt,
Gulfstream Production Certificate Operations
SUPPLIER QUALITY ASSURANCE SYSTEM REQUIREMENTS SQAR 0001 REV D Supplier s Quality System David H. Trucksis Donald A. Strickland R. Christiansen PREPARED BY: REVIEWED BY: APPROVED BY: Robert W. Mullen Jr.
The entire document shall be read and understood before proceeding with a test. ISTA 3B 2013 - Page 1 of 35
Packaged-Products for Less-Than-Truckload (LTL) Shipment ISTA 3 Series General Simulation Performance Test PROCEDURE VERSION DATE Last TECHNICAL Change: NOVEMBER 2012 Last EDITORIAL Change: JANUARY 2013
Outer Diameter 23 φ mm Face side Dimension 20.1 φ mm. Baffle Opening. Normal 0.5 Watts Maximum 1.0 Watts Sine Wave.
1. MODEL: 23CR08FH-50ND 2 Dimension & Weight Outer Diameter 23 φ mm Face side Dimension 20.1 φ mm Baffle Opening 20.1 φ mm Height Refer to drawing Weight 4.0Grams 3 Magnet Materials Rare Earth Size φ 9.5
MINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB-TIER SUPPLIERS
MINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB-TIER SUPPLIERS CONTENTS 1. CONTROL PLANS 2. PROCESS APPROACH 3. PERFORMANCE 4. INTERNAL AUDITING 5. CONTROL OF NON-CONFORMING PRODUCT 6.
How To Ensure Quality Assurance
1001 Robb Hill Road Oakdale, PA 15071-3200 412/923-2670 PROCUREMENT SPECIFICATION: SUPPLIER QUALITY MANAGEMENT SYSTEM REQUIREMENTS Specification Number: ATI-QA-703, Rev 4 Date: 11/12/13 Page: 1 of 7 Written
Active noise control in practice: transformer station
Active noise control in practice: transformer station Edwin Buikema 1 ; Fokke D. van der Ploeg 2 ; Jan H. Granneman 3 1, 2, 3 Peutz bv, Netherlands ABSTRACT Based on literature and extensive measurements
MATRIX TECHNICAL NOTES
200 WOOD AVENUE, MIDDLESEX, NJ 08846 PHONE (732) 469-9510 FAX (732) 469-0418 MATRIX TECHNICAL NOTES MTN-107 TEST SETUP FOR THE MEASUREMENT OF X-MOD, CTB, AND CSO USING A MEAN SQUARE CIRCUIT AS A DETECTOR
APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS BUILDING AN EFFECTIVE, HIGH PERFORMANCES, 2 WAY, 12 LOUDSPEAKER SYSTEM
APPLICATION NOTE PROFESSIONAL LOUDSPEAKERS BUILDING AN EFFECTIVE, HIGH PERFORMANCES, 2 WAY, 12 LOUDSPEAKER SYSTEM KEY FEATURES GENERAL SPECIFICATIONS THIELE SMALL PARAMETERS > An effective, high performance
Fluid structure interaction of a vibrating circular plate in a bounded fluid volume: simulation and experiment
Fluid Structure Interaction VI 3 Fluid structure interaction of a vibrating circular plate in a bounded fluid volume: simulation and experiment J. Hengstler & J. Dual Department of Mechanical and Process
5.2.7.4 CONCRETE: CONTRACTOR S QUALITY CONTROL PLAN
5.2.7.4 CONCRETE: CONTRACTOR S QUALITY CONTROL PLAN NOTE: This document is generally written in the imperative mood. The subject, "the Contractor" is implied. Also implied in this language are "shall",
200350 and 200355 Accelerometers
and Accelerometers Bently Nevada Asset Condition Monitoring Description The and Accelerometers are general purpose, casemounted seismic transducers designed for use with Trendmaster Pro Constant Current
AUTOMATIC NETWORK ANALYZER PROCEDURES FOR 5045 KLYSTRON CAVITIES * J.G. Judkins
Introduction SLAC-TN-91-10 July 1991 AUTOMATIC NETWORK ANALYZER PROCEDURES FOR 5045 KLYSTRON CAVITIES * J.G. Judkins Stanford Linear Accelerator Center Stanford University, Stanford, CA 94309 This Note
ECE 435 INTRODUCTION TO THE MICROWAVE NETWORK ANALYZER
ECE 435 INTRODUCTION TO THE MICROWAVE NETWORK ANALYZER Latest revision: October 1999 Introduction A vector network analyzer (VNA) is a device capable of measuring both the magnitude and phase of a sinusoidal
Environment-Laboratory Ambient Conditions
ISSUE 3.0: MADE MINOR CLARIFICATION CHANGES. FOR CLIENT LABS Purpose To assure laboratory conditions are stable during the performance of testing and data collection. Why this requirement is important?
Department of Electrical and Computer Engineering Ben-Gurion University of the Negev. LAB 1 - Introduction to USRP
Department of Electrical and Computer Engineering Ben-Gurion University of the Negev LAB 1 - Introduction to USRP - 1-1 Introduction In this lab you will use software reconfigurable RF hardware from National
UNCONTROLLED COPY FOR REFERENCE ONLY
CLOVER MACHINE AND MFG. 800 MATHEW ST. #101 SANTA CLARA, CA 95050 727-3380 727-7015 fax REVISION: DATE: PAGE 1 OF 45 QUALITY POLICY MANUAL DISTRIBUTION LIST: President Purchasing Manager Vice President
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
MPC 4. Machinery Protection Card Type MPC 4 FEATURES. Continuous on-line Machinery Protection Card
Machinery Protection Card Type FEATURES Continuous on-line Machinery Protection Card Real-time measurement and monitoring using state-of-the-art DSP techniques Fully VME-compatible slave interface Fully
Explosion proof enclosures
1 of 7 Explosion proof enclosures DE8 C 2 of 7 The Ex d enclosures are rugged and designed for harsh environment like: Oil and gas industry Chemical industry Pharmaceutical industry Agribusiness Without
When printed the document is for reference only and is considered uncontrolled - refer to the Document Control System for the most current version
QM-1 SUPPLEMENT QUALITY MANAGEMENT SYSTEMS MANUAL Revision 6 Page: 1 of 6 APPROVED BY: TITLE DATE Electronic Signature on file Quality Director 10/3/15 D. Picciotti Page: 2 of 6 DOCUMENT REVISION HISTORY
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-P series I PN = 6, 10, 25 A Ref: HO 6-P, HO 10-P, HO 25-P For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary
Quality Management System General
Audit Date: Quality Management System General Requirement: 4.1 and 4.2.2-QMS General Verify Scope Comments/Evidence/Findings: Verify the Exclusions is applicable and justified How are the processes in
Agilent X/P/K281C Adapters
Agilent X/P/K281C Adapters Including Options 006, 012, 013, 106 Operating and Service Manual Contents 1 Introduction 7 Product Overview 8 Options 8 Instruments Covered by Manual 10 2 Installation 11 Initial
Precision Miniature Load Cell. Models 8431, 8432 with Overload Protection
w Technical Product Information Precision Miniature Load Cell with Overload Protection 1. Introduction The load cells in the model 8431 and 8432 series are primarily designed for the measurement of force
INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES. Interpretations of the FTP
INTERNATIONAL ASSOCIATION OF CLASSIFICATION SOCIETIES Interpretations of the FTP CONTENTS FTP1 Adhesives used in A or B class divisions (FTP Code 3.1, Res A.754 para. 3.2.3) June 2000 FTP2 Pipe and duct
Design Verification. Introduction
Design verification is an essential step in the development of any product. Also referred to as qualification testing, design verification ensures that the product as designed is the same as the product
Quality Management System Manual Revision L
This Page 1 of 35 of the Quality Management System Manual If issued as a controlled copy, the serial number of this copy is Quality Management System Manual Certified to AS9100 Revision C Printed copies
CalMod Design-Build Electrification Services
SECTION 28 16 00 INTRUSION DETECTION SYSTEM PART 1 - GENERAL 1.1 DESCRIPTION A. This section describes the detailed technical requirements for the Intrusion Detection System (IDS), where the Contractor
Company Quality Manual Document No. QM Rev 0. 0 John Rickey Initial Release. Controlled Copy Stamp. authorized signature
Far West Technology, Inc. ISO 9001 Quality Manual Document No.: QM Revision: 0 Issue Date: 27 August 1997 Approval Signatures President/CEO Executive Vice President Vice President/CFO Change Record Rev
Decoding an Accelerometer Specification. What Sensor Manufacturer s Don t Tell You! David Lally VP Engineering PCB Piezotronics, Inc.
Decoding an Accelerometer Specification Sheet What Sensor Manufacturer s Don t Tell You! David Lally VP Engineering PCB Piezotronics, Inc. IMAC-XXVII February 2008 1 Overview Specification Sheet Provides
ASTM E 90: Laboratory Measurement of Airborne Sound Transmission of Building Partitions and Elements
ASTM E 90: Laboratory Measurement of Airborne Sound Transmission of Building Partitions and Elements 1 of 8 TEST : Whisper Industries, L.L.C. Report Date: August 14, 2008 Date: July 9, 2008 Number: RESULT
ENCLOSURE DESIGN I S 2008
ENCLOSURE DESIGNS 2008 Beyma introduces a new range of enclosure designs created for obtaining the best performance from our latest loudspeakers and following the current trends in the market. The new
14.5GHZ 2.2KW CW GENERATOR. GKP 22KP 14.5GHz WR62 3x400V
14.5GHZ 2.2KW CW GENERATOR GKP 22KP 14.5GHz WR62 3x400V UTILIZATION OF GKP 22KP GENERATOR With its characteristics of power stability whatever the load, very fast response time at a pulse, low ripple,
zseries 18-Slot Chassis 18-Slot 3U PXI Express Chassis with AC Up to 8 GB/s
TECHNICAL SPECIFICATIONS zseries 18-Slot Chassis 18-Slot 3U PXI Express Chassis with AC Up to 8 GB/s 2015 LitePoint, A Teradyne Company. All rights reserved. The LitePoint zseries 18-slot chassis is an
How To Use A Corona Mdi 110
CORONA MDI 110 APPLICATION Domestic water meter FEATURES 4 Modular multi-jet domestic meter with inductive scanning (without magnetic influence) 4 System capability, with standard applicable pulse output
Test Report No. C829QPEN
Institut für Solartechnik Hochschule für Technik Rapperswil Oberseestrasse 10, CH 8640 Rapperswil Tel +41 55 222 48 21, Fax +41 55 222 48 44 www.solarenergy.ch Ordered by: Westech Components Wuxi Co.,
MYRICOM, INC. TEST REPORT FOR THE SERVER RACK, 10G-PCIE2-8B2-2S & 10G-PCIE2-8B2-2QP FCC PART 15 SUBPART B SECTIONS 15.107 AND 15.109 CLASS A TESTING
TESTING CERT #803.01, 803.02, 803.05, 803.06 MYRICOM, INC. TEST REPORT FOR THE SERVER RACK, 10G-PCIE2-8B2-2S & 10G-PCIE2-8B2-2QP FCC PART 15 SUBPART B SECTIONS 15.107 AND 15.109 CLASS A TESTING DATE OF
How To Use A Sound Card With A Subsonic Sound Card
!"## $#!%!"# &"#' ( "#' )*! #+ #,# "##!$ -+./0 1" 1! 2"# # -&1!"#" (2345-&1 #$6.7 -&89$## ' 6! #* #!"#" +" 1##6$ "#+# #-& :1# # $ #$#;1)+#1#+
IMQ RULES. Contents. IMQ Rules - Product certification
IMQ RULES PRODUCT CERTIFICATION "ELECTRIC ENERGY METERS AND METER UNITS" PRODUCT OF NEW MANUFACTURING Contents IMQ Rules - Product certification Particular Rules for the Electric energy meters and meter
Opportunities for HALT/HASS in designing robust electronics
Opportunities for HALT/HASS in designing robust electronics Isabelle Vervenne Flanders Mechatronics Engineering Centre Katholieke Hogeschool Brugge-Oostende Outline Introduction HALT HASS/HASA Predominant
VISIT US ON OUR WEBSITE @ WWW.PSI-PCI.COM
VISIT US ON OUR WEBSITE @ WWW.PSI-PCI.COM SIZE: 49.25'' in ID x 72.29'' in length Updated August 2011 SIZE: 1250.95 mm ID x 1836.17 mm length The tank assembly is a hemispherical pressure vessel of all
Active Vibration Isolation of an Unbalanced Machine Spindle
UCRL-CONF-206108 Active Vibration Isolation of an Unbalanced Machine Spindle D. J. Hopkins, P. Geraghty August 18, 2004 American Society of Precision Engineering Annual Conference Orlando, FL, United States
Specification of 5 Wire Analog Touch Panel
Specification of 5 Wire Analog Touch Panel 5 WIRE ANALOG RESISTIVE TOUCH PANEL A. Application This specification applies to the 5 Wire Analog Resistive Touch Panel. B. Environmental Conditions 1. Operating
THE VOLLRATH COMPANY, L.L.C. VSWI NUMBER
THE VOLLRATH COMPANY, L.L.C. VOLLRATH SYSTEM WORK INSTRUCTION VSWI NUMBER PAGE 1 of 19 SUBJECT DATE ISSUED Packaging Test Procedure for Purchased Products 04/30/10 SUPERSEDES New AUTHOR APPROVED BY REVIEW/APPROVED
Time Domain and Frequency Domain Techniques For Multi Shaker Time Waveform Replication
Time Domain and Frequency Domain Techniques For Multi Shaker Time Waveform Replication Thomas Reilly Data Physics Corporation 1741 Technology Drive, Suite 260 San Jose, CA 95110 (408) 216-8440 This paper
Lecture 1-10: Spectrograms
Lecture 1-10: Spectrograms Overview 1. Spectra of dynamic signals: like many real world signals, speech changes in quality with time. But so far the only spectral analysis we have performed has assumed
An internal gyroscope minimizes the influence of dynamic linear acceleration on slope sensor readings.
TECHNICAL DATASHEET #TDAX06070X Triaxial Inclinometer with Gyro ±180⁰ Pitch/Roll Angle Pitch Angle Rate Acceleration SAE J1939, Analog Output or RS-232 Options 2 M12 Connectors, IP67 with Electronic Assistant
Continuous, remote monitoring and logging of electromagnetic fields
MULTI-BAND EMF AREA MONITOR AMB-8057 Continuous, remote monitoring and logging of electromagnetic fields Discrimination of GSM and UMTS contributions to total emf values Magnetic fields monitoring from
9000 Series Accelerometers Specifications
Technical Data 9000 Series Accelerometers Specifications Catalog Numbers EK-43781I, EK-43782I, EK-46255I, EK-45890I, EK-43784I, EK-47086I, EK-43792I, EK-47090I, EK-43799I, EK-43794I, EK-43795I, EK-43797I,
High Performance Visible Laser Diode Scanners
A B ALLEN-BRADLEY High Performance Visible Laser Diode Scanners (Catalog No. 27-LD4z1, -LD4z4 27-LD8z1, -LD8z4) Product Data These high performance, fixed-mount scanners use a Visible Laser Diode (VLD)
NI USB-5681 RF Power Meter Specifications
NI USB-568 RF Power Meter Specifications General This document lists specifications for the NI USB-568 RF power meter. Minimum or maximum specifications are warranted under the following conditions: hour
DfRSoft 2-Day Course Shock & Vibration: Test, Design, and Design Assurance
DfRSoft 2-Day Course Shock & Vibration: Test, Design, and Design Assurance Understanding of vibration and shock stresses is important for the design of reliable products for diverse applications, ranging
Quality Management System Manual
Quality Management System Manual Assurance ISO / AS Manual Quality Management System EXCEEDING ALL EXPECTATIONS Since our inception in 1965, Swiss-Tech has supplied the medical, aerospace, hydraulic, electronic
Section 10.9 STRUCTURAL STEEL AND MISCELLANEOUS METAL COMPONENTS
Section 10.9 STRUCTURAL STEEL AND MISCELLANEOUS METAL COMPONENTS 10.9.1 Purpose The purpose of this procedure is to provide a process for the evaluation and acceptance of fabricated structural steel and
Vector Network Analyzer Techniques to Measure WR340 Waveguide Windows
LS-296 Vector Network Analyzer Techniques to Measure WR340 Waveguide Windows T. L. Smith ASD / RF Group Advanced Photon Source Argonne National Laboratory June 26, 2002 Table of Contents 1) Introduction
\ srl High Technology Gear Reducers and Cardan Shafts CERTIFIED QUALITY SYSTEM: UNI ISO EN 9001:2008 ICIM 2779/2; IQNET N. IT-28236 UNIVERSAL SHAFT
UNIVERSAL SHAFT CAT CERTIFICATION CARDAN SHAFTS - COUPLINGS Alongside with the production of special gearboxes, our company has developed the production of Universal shafts, with the same high quality
Bogue Machine Company, Inc. Business Instruction
Bogue Machine Company, Inc. Business Instruction Document Title: Supplier Quality Control Requirements Document Number: Revision: Document Owner: Mark Bogue Backup Owner: Craig Bogue Parent Document: PURP-004,
2.5-inch Hard Disk Drive with High Recording Density and High Shock Resistance
2.5-inch Hard Disk Drive with High Recording Density and High Shock Resistance By KUSUMOTO Tatsuharu, TODA Akio Toshiba has developed the MQ01ABD100 dual-platter 2.5-inch hard disk drive (HDD) with a capacity
EMERGENCY EGRESS LIGHTING POWER SUPPLY PART NO. 5925-6 COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST
EMERGENCY EGRESS LIGHTING POWER SUPPLY PART NO. WITH ILLUSTRATED PARTS LIST Initial Issue: June 16, 1995 33-51-80Page 1 May 20/2010 RECORD OF REVISIONS REV. NO. ISSUE DATE A 01-26-96 B 09-21-99 C 10-26-09
Nederland België / Belgique
Cronus Brochure 2 Introduction Cronus: The first spectrometer and colorimeter in one The Cronus is world s first spectrocolorimeter combining a high en VIS spectrometer with a high speed XYZ colorimeter.
Check-list for auditors. Audit visit at candidate registered laboratories
Check-list for auditors Audit visit at candidate registered laboratories 1 Contents Introduction Laboratory documentation required by the standard(s), available for inspection by the auditor Items to be
THE STRUCTURAL HEALTH MONITORING SYSTEM OF THE RION ANTIRION BRIDGE CHARILAOS TRIKOUPIS. Akis Panagis
InnoWeek on RES July 03,2013, Patras, Greece THE STRUCTURAL HEALTH MONITORING SYSTEM OF THE RION ANTIRION BRIDGE CHARILAOS TRIKOUPIS Akis Panagis Monitoring engineer Gefyra S.A. INDEX 1. Introduction-Structure
Section 100 Contractor Quality Control Program
7/21/2014 AC 150/5370-10G Section 100 Contractor Quality Control Program 100-01 General. When the specification requires a Contractor Quality Control Program, the Contractor shall establish, provide, and
OVERVIEW OF STANDARD 7E & STANDARD 20
Standard for Thermal Transport Packaging Used in Parcel Delivery System Shipment 7E 2 010 ISTA 7E Usage Modes VERSION DATE OCTOBER 2010 Initial Release ISTA, Distributing Confidence, Worldwide ISTA 7-Series
AIR QUALITY SURVEILLANCE BRANCH ACCEPTANCE TEST PROCEDURE (ATP) FOR. Teledyne Advanced Pollution Instruments Model 400 E Ozone Analyzer AQSB ATP 002
AIR QUALITY SURVEILLANCE BRANCH ACCEPTANCE TEST PROCEDURE (ATP) FOR Teledyne Advanced Pollution Instruments Model 400 E Ozone Analyzer AQSB ATP 002 First Edition MONITORING AND LABORATORY DIVISION August
MoveInspect HF HR. 3D measurement of dynamic processes MEASURE THE ADVANTAGE. MoveInspect TECHNOLOGY
MoveInspect HF HR 3D measurement of dynamic processes MEASURE THE ADVANTAGE MoveInspect TECHNOLOGY MoveInspect HF HR 3D measurement of dynamic processes Areas of application In order to sustain its own