USB 3.0 & SATA III Combo Card. Features. Description. Placement. System Requirement. Dimensions. Transcend Information Inc.

Transcription

1 Description This device is designed to add revolutionary new USB 3.0 ports and SATA III ports to any desktop computer with a PCI Express slot. Its PCI Express 2.0 x1 connection interface is compatible with virtually all current motherboards, and guarantees unrestricted two-way communication between your PC and any USB/ SATA devices you plug into the card. Placement Features Works in any PCI Express slot Support two external USB3.0 ports and two internal SATA III ports Connection USB 3.0 bandwidth up to 5Gb/s and SATA bandwidth up to 6Gb/s Backwards compatible with USB 1.1/ 2.0 and SATA I/II devices Fully compatible with PCI Express 2.0 xhci compliant SATA interface support NCQ command and AHCI mode Supports PCI bus power management interface rev. 1.2 System Requirement Desktop computer with an available PCIe slot. W Operating System: Windows XP, Windows Vista, Windows 7 (32bit or 64bit) Note: Internet access to download the device driver L Dimensions Side Millimeters Inches L W

2 Block Diagram 2

3 USB 3.0 Pinouts Pin No. Pin Name Function 1 VBUS Power 2 D- USB 2.0 differential pair 3 D+ 4 ID OTG identification 5 GND Ground for power return 6 MicB_SSTX- SuperSpeed transmitter differential pair 7 MicB_SSTX+ 8 GND_DRAIN Ground for SuperSpee signal return 9 MicB+SSRX- SuperSpeed receiver differential pair 10 MicB+SSRX+ PCIe 2.0 Pinouts Pin No. Pin Name Top Side Function 1 +12V 12V power 2 +12V 12V power 3 +12V 12V power 5 SMCLK SMBus clock 6 SMDAT SMBus data 7 GND Ground V 3.3V power 9 JTAG1 TRST# (Test Reset) resets the JTAG interface Vaux 3.3V auxiliary power 11 WAKE Signal for Link reactivation 12 RSVD Reserved 13 GND Ground 14 PETp0 Transmitter differential 15 PETn0 pair 16 GND Ground 17 PRSNT2 Hot-Plug presence detect 18 GND Ground SATA III Pinouts Pin No. Pin Name Function 1 GND Ground 2 A+ Transmit + 3 A- Transmit - 5 B- Receive - 6 B+ Receive + 7 GND Ground Pin No. Bottom Side Pin Name Function 1 PRSNT1 Hot-Plug presence detect 2 +12V 12V power 3 +12V 12V power 5 JTAG2 TCK (Test Clock), clock input for JTAG interface 6 JTAG3 TDI (Test Data Input) 7 JTAG4 TDO (Test Data Output) 8 JTAG5 TMS (Test Model Select) V 3.3V power V 3.3V power 11 PERST Fundamental Reset 12 GND Ground 13 REFCLK+ Reference Clock 14 REFCLK- (differential pair) 15 GND Ground 16 PERp0 17 PERn0 Receiver differential pair 18 GND Ground 3

4 Specifications Environment Dimensions (PCB size) 120mm (L) 63mm (W) Operating Temperature 0 (32 ) to 70 (158 ) Power Input Standard 4-pin / 15-pin SATA Power Connector USB Bus Power Output 5V DC, 900mA (max) per port PC Interface PCI Express 2.0 single lane (x1) USB Ports 2 external (supports USB 1.1 / 2.0 / 3.0) SATA Ports 2 Internal (supports SATA 1.5G/ 3G/ 6G) USB 3.0 Connection Bandwidth Up to 5 Gbits per second SATA III Connection Bandwidth Up to 6 Gbits per second Weight 70g Certificates CE, FCC, BSMI Warranty 2-years limited 4

5 1. The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. 2. For specific capacity, performance, and reliability requirement, please contact with sales. TAIWAN No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C TEL Fax USA Los Angeles: Maryland: CHINA GERMANY HONG KONG JAPAN THE NETHERLANDS United Kingdom 5