Imperial Positive Drive Timing Belts and Pulleys

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Imperial Positive Drive Timing Belts and Pulleys"

Transcription

1 Imperial Positive Drive Timing Belts an Pulleys linear & rotary motion control

2 P.I.E.S. Australia Pty t is the leaing Australasian istributor for Synchronous timing belts an pulleys. A wholly Australian owne, family business forme in 7, PIES is the sole Australian agents for Synchroflex, Breco an Brecoflex polyurethane belting proucts. Pies also esign, manufacture, import an export timing belts an pulleys. CONTENTS PAGE No. Introuction 3 X (0.0 ) Belts 4 X (0.0 ) Pulleys 5 (3/ ) Belts 6 (3/ ) Pilot Bore Pulleys 7 (3/ ) Taper ock Pulleys 9 H (1/2 ) Belts H (1/2 ) Pilot Bore Pulleys H (1/2 ) Taper ock Pulleys XH (7/ ) Belts 17 XH (7/ ) Pilot Bore Pulleys 1 XH (7/ ) Taper ock Pulleys XXH (1. ) Belts 17

3 Imperial ubber Timing Belts The synchronous belt rives, also calle timing rives because of their geometry, represent the most moern an efficient power transmission system. They are esigne to provie a practical alternative, in many application fiels, to chain an, sometimes, gear rives. This rive system offers an outstaning application versatility that can be easily taken from the table. This catalogue has been tailore to provie esigners with general an specific information, incluing construction an esign features. The synchronous rives, working with a efinite pitch that ensures positive synchronous conitions, have the torque rating transmitte through the tooth engagement. There is no nee for high installation tension an consequently, less loa on bearings is provie. The strong structure of the synchronous belts allow the realization of rives that can transmit high power transmission ratings with compact esign an a quieter cleaner operation. Applications: Aggregate machinery Packaging machinery Paper inustry machinery Office equipment arm machinery Textile machinery Printing trae machinery 3

4 PIES X ubber Timing Belts X (Extra ight) 1/5 pitch (5.0mm) Stanar Belt withs 3/ = 037 Example Part Number 1X Pitch length X Extra ight Pitch type 0.0" Wie 0.09" Belt No ength Inches Single Sie No. Of Teeth Belt No ength Inches Double sie No. Of Teeth X Single sie X037 X037 X037 X037 X X037D X037D X037D X037D X037D XD 1/5 pitch (5.0mm) 0X037 X037 1X037 1X037 2X X037D X037D 1X037D 1X037D X037D X037 1X037 1X037 1X037 0X X037D 1X037D 1X037D 0X037D 0X037D " 0.0" 0X037 2X037 2X037 2X037 2X X037D 2X037D 2X037D 0X037D 0X037D XD Double sie Proucts marke * : Minimum quantity may apply. Inbetween lengths are available, minimum quantity may apply. Also available in Polyurethane, minimum quantity may apply. Nonstanar withs available. Contact sales epartment for prices 2X037 0X037 0X037 2X037 2X037 2X037 0X037 3X037 3X037 2X X037D 2X037D 2X037D 0X037D 3X037D* 3X037D* 3X037D* 3X037D* 3X037D* 3X037D* X037 3X037 3X037 4X037 5X037* X037D* 4X037D* 6X037D* 0X037D* X037* 6X037* 7X037* Also available is a range of MX (0.0 / 2.0mm) Pitch timing belts an pulleys. Please see the PIES Polyurethane Timing Belt Catalogue or contact our sales epartment for sizes an availability. 4

5 PIES X Pulleys X 1/5 Pitch X037 Pilot Bore Pulley Pulley No. Type teeth () X037 X037 X037 X037 X Weight X037 X037 X037 X037 X X037 X037 X037 X037 X037 AUMINIUM Type Type 6 as above without flanges X037 X037 X037 X037 44X X037 X037 X In between sizes can be specially manufacture. All X pulleys are stocke in aluminium, but some steel ones are available. Please enquire with our sales staff. (61) () () Type 5

6 PIES ubber Timing Belts (ight) 3/ pitch (9.5mm) Stanar Belt withs 1/2 = 0 3/4 = 0 1 = Example Part Number 5.5 Pitch length 0.3" ight Pitch type Wie 0." Belt No ength Inches Single Sie No. Of Teeth Belt No ength Inches Double sie No. Of Teeth Single sie D D 17 D 2 D 2 D D 3/ pitch (9.5mm) D 5 D 2 D 5 D 0 D 2 D 3 D 7 D 3 D 4 D " 0.3" D Double sie * D 4 D 5 D 5 D 0 D 6 D * * Proucts marke * : Minimum quantity may apply. Inbetween lengths are available, minimum quantity may apply. Also available in Polyurethane, minimum quantity may apply. Nonstanar withs available. Contact sales epartment for prices Pulleys have a Phosphate finish. 6

7 7 3/ Pitch Type Type Type Type as above no flanges Pulley No. Type teeth Weight Pilot Bore Pulley Pulley No. Type teeth Weight Pilot Bore Pulley PIES Timing Pulleys STEE ION STEE ION

8 PIES Timing Pulleys 3/ Pitch Pilot Bore Pulley Pulley No. Type teeth Weight STEE ION Type Type Type as above no flanges Type

9 PIES Timing Pulleys 3/ Pitch 0 Taper ock Bore Pulley Pulley No. Type teeth Weight STEE Type W 7W ION Taper ock Bore Pulley Pulley No. Type teeth Weight Type W STEE W 3W Type 7W ION 3A Type Type 3 Type 3W Type 3A 9

10 PIES Timing Pulleys 3/ Pitch Taper ock Bore Pulley Pulley No. Type teeth S Weight STEE W 9W ION 3A 3A 3A 3A Type Type 5W Type 9W Type 3A

11 PIES H ubber Timing Belts H (HEAVY) 1/2 pitch (.7mm) Stanar Belt withs 3/4 = 0 1 = 1.5 = 2 = 0 3 = 0 Example Part Number 0H0 0.0 Pitch length 0.0" H Heavy Pitch type Wie 0." Belt No ength Inches Single Sie No. Of Teeth Belt No ength Inches Double sie No. Of Teeth H Single sie 2 H 0 H 2 H 0 H 3 H H D 2 H D 0 H D 3 H D 3 H D HD 1/2 pitch (.7mm) 3 H 3 H 4 H 0 H 4 H H D 4 H D 0 H D 4 H D 5 H D H 5 H 5 H 5 H 5 H H D 5 H D 0 H D 6 H D 6 H D " 0.0" 0 H 6 H 6 H 0 H 7 H H D 0 H D 0 H D H D 0 H D HD Double sie 0 H 0 H H 0 H 9 H H D 00 H D H D H D H D Inbetween lengths are available, minimum quantity may apply. Also available in Polyurethane, minimum quantity may apply. Nonstanar withs available. Contact sales epartment for prices Pulleys have a Phosphate finish. 0 H H 00 H H H H

12 Pulley No. Type teeth Weight H07 H07 H07 17H07 1H07 H07 H07 H07 H07 H07 H07 H07 H07 H07 H07 H07 H07 H07 35H07 H07 H07 H07 44H07 H H0 Pilot Bore Pulley Type Type Type Type as above no flanges H Pilot Bore Pulley H 1/2 Pitch PIES H Timing Pulleys STEE ION Pulley No. Type teeth Weight H H H 17H 1H H H H H H H H H H H H H H 35H H H H 44H H H H H H H STEE ION

13 13 Type Type Type Type as above no flanges H Pilot Bore Pulley H0 Pilot Bore Pulley H 1/2 Pitch PIES H Timing Pulleys Pulley No. Type teeth Weight H H H 17H 1H H H H H H H H H H H H H H 35H H H H 44H H H H H H H H STEE ION Pulley No. Type teeth Weight H0 H0 H0 17H0 1H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 35H0 H0 H0 H0 44H0 H0 H0 H0 H0 H0 H0 H STEE ION

14 Pulley No. Type teeth Weight H0 H0 H0 17H0 1H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 H0 35H0 H0 H0 H0 44H0 H0 H0 H0 H0 H0 H0 H Type Type H0 Pilot Bore Pulley H 1/2 Pitch PIES H Timing Pulleys STEE ION

15 PIES H Timing Pulleys H 1/2 Pitch H Taper ock Bore Pulley Pulley No. Type teeth Weight H0 1H H H H H H H H H STEE H H H H H 5W 5W Type H H 5W 3W H H H H 17 H17 ION H Taper ock Bore Pulley Pulley No. Type teeth Weight 1H H H H H Type 5W H H H H H STEE H H H H H 5W 5W 5W H 5W H H H H 17 H17 ION Type 3W Type Type

16 PIES H Timing Pulleys H 1/2 Pitch H0 Taper ock Bore Pulley Pulley No. Type teeth Weight 1H0 H0 H0 H0 H H0 H0 H0 H0 H0 STEE H0 H0 H0 H0 H0 5W 5W Type H017 H0 17 H0 17 H0 17 H0 17 H017 ION 5W H0 Taper ock Bore Pulley Pulley No. Type teeth Weight H0 H0 H0 H0 H H0 H0 H0 H0 H0 STEE Type 5W H017 H017 H017 H W H0 17 H0 17 H0 17 H0 H0 ION Type 4 Type 4W Type

17 PIES XH / XXH ubber Timing Belts XH EXTA HEAVY PITCH 7/ (.2mm) Stanar Belt withs 2 = 0 3 = 0 4 = 0 5 = 0 Example Part Number 9XH Pitch length XH Extra Heavy Pitch type 0." Wie Belt No ength No. Of 0.44" XH Single sie 7XH 5XH 6XH 0XH 7XH Single Sie Inbetween lengths are available, minimum quantity may apply. Also available in Polyurethane, minimum quantity may apply. Nonstanar withs available. Contact sales epartment for prices XH 9XH 1XH XH XH Pulley imensions on next page. Pulleys are nonstocke an are mae to orer. XH XH XXH DOUBE EXTA HEAVY PITCH 1. (31.mm) 1.0" Stanar Belt withs 2 = 0 3 = 0 4 = 0 5 = 0 Example Part Number 0XXH0.0.0 Pitch length XXH Double Extra Heavy Pitch type Wie 0.62" XXH Single sie Belt No ength No. Of 0 XXH 0 XXH 0 XXH 0 XXH 0 XXH Single Sie 56 Inbetween lengths are available, minimum quantity may apply. Also available in Polyurethane, minimum quantity may apply. Nonstanar withs available. Contact sales epartment for prices XXH XXH XXH or Pulley imensions please contact our sales epartment. Pulleys are nonstocke an are mae to orer. 17

18 1 Pulley No. Type teeth Weight 1XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 7XH0 XH0 2XH0 XH0 XH0 XH0 XH0 XH Pulley No. Type teeth Weight 1XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 XH0 7XH0 XH0 2XH0 XH0 XH0 XH0 XH0 XH Type Type Type Type as above no flanges XH0 Pilot Bore Pulley XH0 Pilot Bore Pulley XH 7/ Pitch PIES XH Timing Pulleys

19 PIES XH Timing Pulleys XH 7/ Pitch XH0 Pilot Bore Pulley Pulley No. Type teeth Weight 1XH0 XH0 XH0 XH0 XH XH0 XH0 XH0 XH0 XH XH0 XH0 XH0 XH0 XH XH0 XH0 XH0 XH0 XH XH0 7XH0 XH0 2XH0 XH XH0 XH0 XH0 XH Type Type Type as above no flanges Type

20 PIES XH Timing Pulleys XH 7/ Pitch Pulley No. Type teeth 1XH017 XH017 XH017 XH017 XH017 XH017 XH017 XH017 XH0 XH0 4W 4W 4W 4W 9W XH0 Taper ock Bore Pulley XH XH XH XH XH Type XH0 Taper ock Bore Pulley Pulley No. Type teeth 1XH017 XH017 XH017 XH017 XH XH0 XH0 XH0 XH0 XH0 4W 9W XH XH XH0 XH0 XH Type 4W XH0 Taper ock Bore Pulley Pulley No. Type teeth 1XH017 XH017 XH017 XH0 XH0 XH0 XH0 XH0 XH03535 XH W 9W XH0 XH0 XH0 XH0 XH Type Type Type 9W

21 NOTES

22 PIES Australia are also suppliers of: Synchroflex Timing Belts & Pulleys Breco & Brecoflex Timing Belts Gooyear Inustrial Air Springs Gooyear Automotive Air Springs Poggi ight Angle Gearboxes AeroGo Aerocastors ocking Devices Hour Breakown Service stribute by P.I.E.S. AUSTAIA PTY TD 49 reight Drive, Somerton Tel: ax:

Standard Gears. Enquiry CD Contents. Power Transmission Solutions. Catalogue Selection INDEX CROSS+MORSE

Standard Gears. Enquiry CD Contents. Power Transmission Solutions. Catalogue Selection INDEX CROSS+MORSE Stanar Gears Inex Gear Proucts Overview 2 evel an Mitre Gear Selection -.P. evel an Mitre Gears Metric evel Gears 7- Metric Mitre Gear 6 Straight Racks Spur Gears - Spur Gear Selection 9 atalogue Selection

More information

TIMING PULLEYS & BELTS

TIMING PULLEYS & BELTS TIMING PULLEYS & ELTS 2012 INDEX FETURES OF TIMING PULLEY DRIVES Page 3 LSSIL TIMING PULLEY & ELT DRIVES Page 4 LSSIL TIMING ELTS Page 5-6 LSSIL TIMING PULLEYS PILOT ORE Page 7-12 LSSIL TIMING PULLEYS

More information

Townsend Bearings. TransDev Synchronous Belts. Revision 1

Townsend Bearings. TransDev Synchronous Belts. Revision 1 Townsend Bearings TransDev Synchronous Belts Revision 1 INTRODUCTION CONTENTS Transdev company profile 2 Synchroflex, Breco M, Breco V and Brecoflex belt types 4 Timing belt profile types 6 New Development

More information

Belt Drive Products Metric Sheaves & Timing Pulleys

Belt Drive Products Metric Sheaves & Timing Pulleys Drive Products Metric Sheaves & Timing Pulleys Metric V- T SP Sheaves PTI offers a full line of these widely used Metric V- Sheaves from stock. These European standard sheaves, (coonly known as V-pulleys

More information

B 205 B PULLEYS TENSIONERS CLAMPS SLIDER BEDS

B 205 B PULLEYS TENSIONERS CLAMPS SLIDER BEDS B 205 B PULLEYS TENSIONERS CLAMPS SLIDER BEDS PULLEYS TENSIONERS CLAMPS SLIDER BEDS BRECO and BRECOFLEX timing belts are extensively covered in our various catalogs listed below. This catalog covers timing

More information

POLYURETHANE TIMING BELTS

POLYURETHANE TIMING BELTS B212 POLYURETHANE TIMING BELTS BRECOflex CO., L.L.C. translates the customers needs into new and expanded product lines. We are committed to partner with our customers in providing unique solutions and

More information

Precision Motion Control Pulleys

Precision Motion Control Pulleys Precision Motion Control Pulleys EXPRESS SERVICE Automated design tools Instant quoting Fastest delivery QUALITY Belt and pulley know how Consistent design standards World class LEAN manufacturing Precise

More information

Power Transmission Product Range 2012

Power Transmission Product Range 2012 Power Transmission Product Range 2012 Naismith Engineering & Manufacturing Co P/L www.naismith.com.au Melbourne 149 Heidelberg Rd Northcote, Victoria Australia, 3070 Ph (03) 9489 9811 Fax (03) 9482 1474

More information

Timing Belt Drives - Overview Contents

Timing Belt Drives - Overview Contents Timing Belt Drives - Overview Contents Description and selection guide......................... 111 Calculation (dimensioning)......................... 112-113 Performance Figures T-Profile...........................

More information

your reliable partner EAS -Compact Backlash-free Torque Limiting Clutches K.490.V14.EN

your reliable partner EAS -Compact Backlash-free Torque Limiting Clutches K.490.V14.EN ES -Compact Backlash-free Torque Limiting Clutches K.490.V4.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one

More information

Timing Belt Welding within 24h-Service. Timing Belt Drives - Overview

Timing Belt Welding within 24h-Service. Timing Belt Drives - Overview Timing Belt Drives - Overview Contents Page Description and selection guide... Calculation (dimensioning)... Performance Figures T-Prile... Performance Figures AT-Prile... Performance Figures HTD 3M and

More information

Stock Timing Pulleys STOCK TIMING PULLEYS 1/5" - 7/8" PITCH QD TAPER BUSHED AND STOCK BORE

Stock Timing Pulleys STOCK TIMING PULLEYS 1/5 - 7/8 PITCH QD TAPER BUSHED AND STOCK BORE Stock Timing Pulleys STOC TIING PUYS /5" - 7/8" PITC QD TAPR BUSD AND STOC BOR Stock Bore Taper Bushed QD PITC PUY IN. DSIGNATION 5" X (xtra ight) 3 8" (ight) 2" (eavy) 7 8" X (xtra eavy) artin Timing

More information

Design Manual. Timing Belt. https://www.mitsuboshi.co.jp/english/sien/sien_dl.html. Belt Application Designing Program can be downloaded at:

Design Manual. Timing Belt. https://www.mitsuboshi.co.jp/english/sien/sien_dl.html. Belt Application Designing Program can be downloaded at: V832-C ENGLISH Design Manual Timing Belt To give attentive consideration to both humanity and nature. Belt Application Designing Program can be downloaded at: https://www.mitsuboshi.co.jp/english/sien/sien_dl.html

More information

Works with all belt types and materials E207 UNIVERSAL BELT TENSION METER - SM4. Toll Free: 1-888-463-1400 Fax: 1-732-542-6725 Web: www.brecoflex.

Works with all belt types and materials E207 UNIVERSAL BELT TENSION METER - SM4. Toll Free: 1-888-463-1400 Fax: 1-732-542-6725 Web: www.brecoflex. Works with all belt types and materials E07 UNIVERSAL BELT TENSION METER - SM4 1 UNIVERSAL BELT TENSION METER - SM4 The new SM4 Tension Meter is designed to measure the static tension of all belts (timing

More information

Aluminium worm geared motors. 90W to 2.2kW. Modular system with easy mounting. Lenze. ideas in motion

Aluminium worm geared motors. 90W to 2.2kW. Modular system with easy mounting. Lenze. ideas in motion luminium worm geared motors 90W to 2.2kW Modular system with easy mounting Lenze ideas in motion luminium worm geared motors compact and economic Standard hollow shaft Ouput shaft single or double S or

More information

Centrigard Overload Clutch

Centrigard Overload Clutch Centrigard Overload Clutch Centric products have long been known as the most durable overload clutches on the market. Today we have added a maintenance friendly clutch that provides zero backlash. This

More information

LOW VOLTAGE D.C. MOTORS & GEARBOX UNITS

LOW VOLTAGE D.C. MOTORS & GEARBOX UNITS LOW D.C. MOTORS & GEARBOX UNITS Printed on 100% recycled paper. 918D SERIES SINGLE RATIO METAL GEARBOX (RE280 MOTOR/RE 280/1 MOTOR) NEW! NEW! NEW! NEW! NEW! WITH 2mm OUTPUT SHAFT (15:1 ONLY) WITH 4mm OUTPUT

More information

Belt Drives and Chain Drives. Power Train. Power Train

Belt Drives and Chain Drives. Power Train. Power Train Belt Drives and Chain Drives Material comes for Mott, 2002 and Kurtz, 1999 Power Train A power train transmits power from an engine or motor to the load. Some of the most common power trains include: Flexible

More information

Manufacturers of Power Transmission and Motion Control Components. Precise. Reliable. Trusted.

Manufacturers of Power Transmission and Motion Control Components. Precise. Reliable. Trusted. Manufacturers of Power Transmission and Motion Control Components Precise. Reliable. Trusted. Concentric Maxi Torque Revolutionary Keyless Hub-to-Shaft Connection System CMT Experience Maintenance, Vibration

More information

Super G3 FAX Board-AE1 PARTS CATALOG SEPTEMBER 12, 2009 REV. 0. CANON Super G3 FAX Board-AE1 REV. 0 PRINTED IN U.S.A.

Super G3 FAX Board-AE1 PARTS CATALOG SEPTEMBER 12, 2009 REV. 0. CANON Super G3 FAX Board-AE1 REV. 0 PRINTED IN U.S.A. Super G FAX Boar-AE1 PARTS CATAOG SEPTEMBER 12, 2009 REV. 0 COPYRIGHT 2009 CANON INC. CANON Super G FAX Boar-AE1 REV. 0 PRINTED IN U.S.A. PREFACE This Parts Catalog contains listings of parts use Diagrams

More information

14. Belt and Chain Drives. Objectives. Introduction. Introduction

14. Belt and Chain Drives. Objectives. Introduction. Introduction 14. Belt and Chain Drives August 15, 007 1 August 15, 007 Objectives Introduction Understand principles of operation of flexibledrive systems. Determine allowable forces and torques for flexible-drive

More information

DEVELOPMENT OF TIMING BELT DRIVES

DEVELOPMENT OF TIMING BELT DRIVES Blaža Stojanović, Nenad Miloradović DEVELOPMENT OF TIMING BELT DRIVES UDC: 621.83/.85 INTRODUCTION Timing belt drive is relatively new conception of power transfer, accepted in all areas of industry today.

More information

Bevel and Mitre Gears

Bevel and Mitre Gears evel and Mitre ears evel and Mitre ears are used to transmit power between shafts intersecting at 90, on low speed, high torque applications where pitch line velocity does not exceed m/s. ll ross+morse

More information

Belt Drives. the mark of engineering excellence

Belt Drives. the mark of engineering excellence Belt Drives Belt Drives Belts Pulleys Chains Sprockets Shaft Fixings Couplings Geared Drives Belts Pulleys Chains Sprockets Shaft Fixings Couplings the mark of engineering excellence the mark of engineering

More information

Worms and wheels Gears Pulleys Chain sprockets Racks Screw jacks Ball screws Lead screws Gearboxes Springs

Worms and wheels Gears Pulleys Chain sprockets Racks Screw jacks Ball screws Lead screws Gearboxes Springs Worms and wheels Gears Pulleys Chain sprockets Racks Screw jacks Ball screws Lead screws Gearboxes Springs Linear shafts Shock absorbers Ball pins Hand wheels Universal joints Couplings Screws and fasteners

More information

Hyspecs Transmissions Ltd. Mechanical Power Transmission Solutions

Hyspecs Transmissions Ltd. Mechanical Power Transmission Solutions Hyspecs Transmissions Ltd Mechanical Power Transmission Solutions Introduction HYTRANS (Hyspecs Transmissions Ltd) is a division of Hyspecs Holdings Ltd. Hyspecs Holdings Ltd is made up of: HYTRANS (Hyspecs

More information

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B T e l + 4 4 ( 0 ) 2 6 0 0 F a + 4 4 ( 0 ) 2 2 0 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for Pitch British Standard Chains Type 06B Simple Chain 06B- - Tooth Width B -.mm

More information

How to use the Technical Timing Belt Calculation Program

How to use the Technical Timing Belt Calculation Program How to use the Technical Timing Belt Calculation Program The Timing Belt Calculation Program is made for beginners as well as for experts. It is designed in a clear and comprehensible way and guides the

More information

2. DRILLING MACHINE. 2.1 Introduction. 2.2 Construction of a drilling machine. 2.3 Types of drilling machines Portable drilling machine

2. DRILLING MACHINE. 2.1 Introduction. 2.2 Construction of a drilling machine. 2.3 Types of drilling machines Portable drilling machine 2.1 Introduction 2. DRILLING MACHINE Drilling machine is one of the most important machine tools in a workshop. It was designed to produce a cylindrical hole of required diameter and depth on metal workpieces.

More information

The FRT all aluminium universal mount worm geared motor units are outstanding examples

The FRT all aluminium universal mount worm geared motor units are outstanding examples FRT-MNT FRT-MNA FRT-MAL The FRT all aluminium universal mount worm geared motor units are outstanding examples of the diverse range and product performance that has built the CMG name. The FRT series ranges

More information

TECHNICAL SECTION. Table 26 Overall Belt Thickness Dimensions. Table 25 Center Distance Tolerances. Table 27 Overall Belt Thickness Tolerances

TECHNICAL SECTION. Table 26 Overall Belt Thickness Dimensions. Table 25 Center Distance Tolerances. Table 27 Overall Belt Thickness Tolerances Table 25 Center Distance Tolerances Belt Length Center Distance Tolerance Up to 10 Up to 254 ±.008 ±.20 Over 10 To 15 Over 15 To 20 Over 20 To 30 Over 30 To 40 Over 40 To 50 Over 50 To 60 Over 60 To 70

More information

Synchro-Power. Open-end and endless polyurethane synchronous belts. First class performance on both power transmission and linear applications

Synchro-Power. Open-end and endless polyurethane synchronous belts. First class performance on both power transmission and linear applications E2/20133 Synchro-Power Gates Synchro-Power polyurethane belts provide maximum power transmission combined with perfect tooth meshing and tight and accurate tolerances. Polyurethane is extremely wear and

More information

PTY LTD ROD ENDS COMPREHENSIVE RANGE OF ROD ENDS AND SPHERICAL BEARINGS FROM THE WORLD S LEADING MANUFACTURERS.

PTY LTD ROD ENDS COMPREHENSIVE RANGE OF ROD ENDS AND SPHERICAL BEARINGS FROM THE WORLD S LEADING MANUFACTURERS. RO ENS COMPREENSIVE RANGE OF RO ENS AN SPERICAL EARINGS FROM TE WORL S LEAING MANUFACTURERS www.linearbearins.com.au GENERAL Ro ens are available in riht or left han threa, male or female esin. Shank (threa)

More information

Contents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125

Contents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125 ELATECH Polyurethane belts 2 Introduction to ELATECH polyurethane belts 2 Page Contents ELATECH M and V 3 Introduction 4 Tension cords 4 Products certifications 4 Mechanical and chemical properties 4 Executions

More information

Sliding Door Drives DC-21 Series

Sliding Door Drives DC-21 Series Sliding Door Drives DC-21 Series DICTAMAT 00-21 / 3400-21 The DC-21 series of door operators is made up of modular components with DC-motor. It has especially been designed for automatising sliding doors

More information

S O M T A C A T A L O G U E P 1 2

S O M T A C A T A L O G U E P 1 2 S O M T A C A T A L O G U E P 1 2 Manufacturers & Suppliers of Drills, Reamers, En Mills, Bore Cutters, Taps & Dies, Toolbits, Soli Carbie Tooling, Carbie Insert Tooling, Custom Tools an Surface Coatings

More information

iglidur PRT Slewing Ring Bearing

iglidur PRT Slewing Ring Bearing igliur igliur Slewing Ring Bearing Stanar range Completely maintenance-free Easy installation, intercangeable sliing pas ig wear resistance For ig loa capacity, ig stiffness Available as stainless steel

More information

New lineup for MEGA TORQUE series

New lineup for MEGA TORQUE series V623-C New lineup for MEGA TRQUE series NEW High-Accuracy Positioning Timing Belt NEW High Torque Timing Belt CNCEPT More compact design, lower operating noise and longer service life MEGA TRQUE G Compact

More information

PFEIFER INDUSTRIES, LLC.

PFEIFER INDUSTRIES, LLC. TIMING BELT DRIVE NOISE AND COMMON CAUSES Most engineers in the power transmission field know that the main drawback of timing belts is that they are inherently noisy. This noise is quieter than chain

More information

TIMING PULLEY TIMING PULLEY (NON-STOCK ITEM 60 DAYS TO 90DAYS DELIVERY)

TIMING PULLEY TIMING PULLEY (NON-STOCK ITEM 60 DAYS TO 90DAYS DELIVERY) TIMING PULLY (NONSTOCK ITM 6 DAYS TO 9DAYS DLIVRY) Timing Pulleys Designation (in) / 5 / Pulleys Designation XL(xtra Light) L( Light) H(Heavy) XH(xtra heary) Size XXL.(/ 8 ) XXH(/ 4 ). Available as madetoorder.

More information

GESIPA Fasteners Innovation for the customers...

GESIPA Fasteners Innovation for the customers... GESIPA Fasteners Innovation for the customers... We specialize in Blin Riveting Systems. We have many years of eperience in manufacturing as well as istribution worlwie. This allows us to offer you the

More information

BetaBots Alpha. Teacher s Guide

BetaBots Alpha. Teacher s Guide BetaBots Alpha Introduction BetaBots Alpha is a small scale robotics challenge designed to teach students the fundamentals of robotics. It is heavily focussed on 3D design, and has students send custom

More information

wheels, drives, stops and miscellaneous movements used in machine construction; types of power saws.

wheels, drives, stops and miscellaneous movements used in machine construction; types of power saws. SECTION IV Noa. 49-34 wheels, drives, stops and miscellaneous movements used in machine construction; types of power saws. MECHANICAL MODELS 25 Section IV 49. Ratchets, pawls and stops. Ratchet mechanisms

More information

FEATURES/BENEFITS. QUANTIS ILH C-Face Reducer / Integral Gearmotor

FEATURES/BENEFITS. QUANTIS ILH C-Face Reducer / Integral Gearmotor FEATURES/BENEFITS QUANTIS ILH C-Face Reducer / Integral Gearmotor QUANTIS 1 3 4 QUANTIS GOLD 5 2 ILH 6 1. Multiple input options C-Face adapters for mounting of NEMA and IEC motors Integral Gearmotors

More information

Mechanical Principles

Mechanical Principles Unit 4: Mechanical Principles Unit code: F/60/450 QCF level: 5 Credit value: 5 OUTCOME 3 POWER TRANSMISSION TUTORIAL BELT DRIVES 3 Power Transmission Belt drives: flat and v-section belts; limiting coefficient

More information

S O M T A C A T A L O G U E P 1 2

S O M T A C A T A L O G U E P 1 2 S O T A C A T A L O G U E P 1 anufacturers & Suppliers of Drills, Reamers, En ills, Bore Cutters, Taps & Dies, Toolbits, Soli Carbie Tooling, Carbie Insert Tooling, Custom Tools an Surface Coatings Somta

More information

Shell Mill Holders. Scan these QR Codes Featured Video. Current Promotion

Shell Mill Holders. Scan these QR Codes Featured Video. Current Promotion www.lynexnikken.com Shell Mill Holers Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers Current Promotion Scan these QR Coes Feature Vieo 73 www.lynexnikken.com Shell Mill Holers Shell Mill Holers

More information

LEGO Mindstorms RIS 2.0 Gears, Pulleys, Wheels, and Tires

LEGO Mindstorms RIS 2.0 Gears, Pulleys, Wheels, and Tires California State University, Chico Intelligent Systems Laboratory Chico, CA 95929-0410 http://www.gotbots.org LEGO Mindstorms RIS 2.0 Gears, Pulleys, Wheels, and Tires B.A. Juliano and R.S. Renner September

More information

Introductory Curriculum

Introductory Curriculum Introductory Curriculum v11.30.08 Introductory Curriculum TABLE OF CONTENTS Activity #1 ED the Robot...... 1 Activity #2 Belt Drives........ 5 Activity #3 Gearing Down..... 8 Activity #4 Gears, Belts,

More information

MECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 2 BELT DRIVES

MECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL 2 BELT DRIVES MECHANICAL PRINCIPLES OUTCOME 4 MECHANICAL POWER TRANSMISSION TUTORIAL BELT DRIVES Simple machines: lifting devices e.g. lever systems, inclined plane, screw jack, pulley blocks, Weston differential pulley

More information

rgab.ru Берг 30 АБ Тел. (495) , факс (495) 22

rgab.ru Берг 30 АБ Тел. (495) , факс (495) 22 rgab.ru 4. Берг Calculation АБ bergab@ya.ru of Bearing Тел. (495)-228-06-21, Load факс (495) 22 4. Calculation of Bearing Load In order to obtain the values of loads applied to a bearing, all of weight

More information

ABS The robust plastic piping system. Product Range effective Pipe, fittings, valves and accessories. Export

ABS The robust plastic piping system. Product Range effective Pipe, fittings, valves and accessories. Export Prouct Range effective 1.1.2006 Export ABS The robust plastic piping system Pipe, fittings, valves an accessories Table of Contents Page Metric Pipe 18 Ahesive Jointe Fittings 19 Aaptor Fittings 27 Unions

More information

Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units

Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units 왎 Hydraulically actuated clutches and spring-applied brakes clutch/brake combined units Or tlinghaus Plates. Clutches. Brakes. Systems. Hydraulically actuated clutches and spring-applied brakes clutch/brake

More information

Mechanical Analysis Belt and chain drives

Mechanical Analysis Belt and chain drives Mechanical Analysis and Design ME 2104 Lecture 3 Mechanical Analysis Belt and chain drives Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room CG25, Phone: 8780, E-Mail: a.kovacevic@city.ac.uk

More information

BERGES variable drive units...

BERGES variable drive units... BERGES variable drive units...... a universal product range to cover the whole spectrum of drive engineering applications! The product range: - Double pulley drives RF b for wide V-belts up to 160 kw -

More information

Gears, Velocity Ratios and Mechanical Advantage

Gears, Velocity Ratios and Mechanical Advantage Gears, Velocity Ratios and Mechanical Advantage What are gears and why are they so Gears are toothed wheels which interlock to form simple machines. The tighter the joint, the less chance of slipping Gears

More information

Innovation Union means: More jobs, improved lives, better society

Innovation Union means: More jobs, improved lives, better society The project follows the Lisbon an Gothenburg Agenas, an supports the EU 2020 Strategy, in particular SMART Growth an the Innovation Union: Innovation Union means: More jobs, improve lives, better society

More information

SKF Power Transmission products

SKF Power Transmission products SK Power Transmission products SK is a registered trademark of the SK Group. ytrel is a registered trademark of DuPont. Dacromet and Dacrotized are registered trademarks of Metal Coatings International

More information

STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH

STROKE BUSH SLIDE ROTARY BUSH STROKE BUSH STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN

More information

FLOOR TYPE MILLING-BORING CENTRE

FLOOR TYPE MILLING-BORING CENTRE FP FLOOR TYPE MILLING-BORING CENTRE FP FLOOR TYPE MILLING-BORING CENTRE MULTI-PURPOSE MILLING AND BORING MACHINE IMPROVED FLEXIBILITY AND DYNAMICS High performance and productivity FP FLOOR TYPE MILLING-BORING

More information

New Science Curriculum. Forces: Investigate levers, pulleys and gears used in real situations

New Science Curriculum. Forces: Investigate levers, pulleys and gears used in real situations New Science Curriculum Forces: Investigate levers, pulleys and gears used in real situations New Science Curriculum Levers Pulleys Gears LEVERS Levers: a simple way of achieving mechanical advantage

More information

Enterprise Resource Planning

Enterprise Resource Planning Enterprise Resource Planning MPC 6 th Eition Chapter 1a McGraw-Hill/Irwin Copyright 2011 by The McGraw-Hill Companies, Inc. All rights reserve. Enterprise Resource Planning A comprehensive software approach

More information

HepcoMotion. BSP ballscrew premier

HepcoMotion. BSP ballscrew premier HepcoMotion SP ballscrew premier ontents INTROUIN TH HepcoMotion SP NUT/SRW OMINTIONS ccuracy SUPPLY OPTIONS SPS SRIS Rapid espatch Programme 3 SPH SRIS High Lead Screws 4 SPM SRIS Miniature Screws H RIN

More information

INTRODUCTION INTRODUCTION TO TYC 3 ROLLER CHAIN PARTS 5 CHAIN TYPES & FEATURES 7

INTRODUCTION INTRODUCTION TO TYC 3 ROLLER CHAIN PARTS 5 CHAIN TYPES & FEATURES 7 INTRODUCTION ANSI STANDARD ROLLER CHAINS 2 10 CONTENTS DOUBLE - PITCH ROLLER CHAINS STANDARD ROLLER CHAINS AGRICULTURAL CHAINS LEAF CHAINS SPECIAL CHAINS CHAIN PARTS 31 37 43 49 53 74 1 2 8/2/05, 1:42

More information

WEAR TESTING AND MEASUREMENT TECHNIQUES FOR POLYMER COMPOSITE GEARS

WEAR TESTING AND MEASUREMENT TECHNIQUES FOR POLYMER COMPOSITE GEARS WEAR TESTING AND MEASUREMENT TECHNIQUES FOR POLYMER COMPOSITE GEARS N. A. Wright and S. N. Kukureka Wear, 250, 1567, (2001) Presented at 13 th International Wear of Materials Conference, Vancouver, 2001.

More information

Products no longer available

Products no longer available Technical ata sheet R6..R haracterize control valves, 2-way, with flange PN 6 for open an close col an warm water systems for moulating control on the water sie of air-hanling an heating systems air bubble-tight

More information

DESIGNING AND MAKING A STONE TUMBLING MACHINE

DESIGNING AND MAKING A STONE TUMBLING MACHINE DESIGNING AND MAKING A STONE TUMBLING MACHINE In several industries, small component parts are tumbled in a machine either to get rid of rough edges etc. or to polish them. The tumbling machines usually

More information

Shaft Design. Shaft Design. Shaft Design Procedure. Chapter 12

Shaft Design. Shaft Design. Shaft Design Procedure. Chapter 12 Shaft Design Chapter 1 Material taken from Mott, 003, Machine Elements in Mechanical Design Shaft Design A shaft is the component of a mechanical device that transmits rotational motion and power. It is

More information

L Timing Belt Pulleys - 3/8 Pitch

L Timing Belt Pulleys - 3/8 Pitch L Timing elt Pulleys - 3/8 Pitch ALUMINUM OUL FLANG W S SRW O...56 For 0- Teeth.59 For - Teeth MATRIAL: Aluminum Alloy FINISH: lear Anodized FOR /" LTS atalog Number A 6A 4-0F050 A 6A 4-0F0506 A 6A 4-F050

More information

Using Gates Idler Hardware in Belt Drive Systems

Using Gates Idler Hardware in Belt Drive Systems burde Volume 58, No. 2 February 2011 Using Gates Idler Hardware in Belt Drive Systems Idler pulleys and sprockets can be valuable belt drive components. Gates idler hardware line now provides drive designers

More information

The hydromechanical ETP principle

The hydromechanical ETP principle Designing with... ...ETP hub-shaft connections The ETP hub-shaft connections are today regarded as the natural range to choose from for professional machine design. They represent the optimal cost/performance

More information

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle DUGARD Machine Tools Since 1939 CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle www.dugard.com Structure Design Assures Outstanding Stability

More information

ANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A.

ANGLgear. right angle drives Inch and Metric Series. The Original Right Angle Gear Drive Made in the U.S.A. ANGLgear right angle drives Inch and Metric Series The Original Right Angle Gear Drive Made in the U.S.A. INDEX INTRODUCTION Intro to ANGLgear Inch & Metric Series pg. 2-3 2 Flange Units, Inch Series pg.

More information

STANDARD PROGRAM.

STANDARD PROGRAM. STANDARD PROGRAM www.nozag.ch About us What counts is success We can help you with it Today clear competitive advantages and opportunities lie in the flexibility, speed, innovation and continuous improvement.

More information

ERIKS UK, Amber Way, Halesowen, West Midlands. B62 8WG Tel: Fax:

ERIKS UK, Amber Way, Halesowen, West Midlands. B62 8WG Tel: Fax: Belt Drives Couplings Chain DRIVES MOTORS & INVERTERS GeaRBOXES Shaft Fixings Fenner, Fenaflex and Trantorque are registered trade marks of J. H. Fenner & Co. Authorised Distributor Belts Pulleys Chains

More information

HIGH PRESSURE GEAR PUMP W1500

HIGH PRESSURE GEAR PUMP W1500 HIGH PRESSURE GEAR PUMP W1500 HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide THE POWER OF THE W1500 A SERIES Haldex Hydraulics is one of the world s leading

More information

Control and Rod End Bearings

Control and Rod End Bearings ontrol an Ro En earings Ro En RO EN EARINGS Nomenclature REP Series, Ro Ens, External Threa......... 114 REP Series, Ro Ens, Internal Threa......... 115 REP Series, Ro Ens, Hollow an Soli Shank.. 116 RA/RR

More information

Ozone, mineral oil HLP to DIN , triglyzeride (rape seed oil) HETG, synthetic ester HEES to VDMA

Ozone, mineral oil HLP to DIN , triglyzeride (rape seed oil) HETG, synthetic ester HEES to VDMA Company standard Flexible rotary Type KD AB-E - 2001-08-27 Replaces: Issue 2000-01-27 1 Description Flexible rotary coupling are used to compensate for radial, angular and axial misalignment of the shafts

More information

SWMS Science Department

SWMS Science Department Honors Physical Science Chapter 9 Simple Machines - Notes Section 1- Types of Simple Machines A machine is a device with moving parts that work together to accomplish a task. A machine accomplishes output

More information

Chapter 42 Thread and Gear Manufacturing THREAD MANUFACTURING SCREW THREAD STANDARDS 10/16/2014. MET Manufacturing Processes.

Chapter 42 Thread and Gear Manufacturing THREAD MANUFACTURING SCREW THREAD STANDARDS 10/16/2014. MET Manufacturing Processes. MET 33800 Manufacturing Processes Chapter 42 Thread and Gear Manufacturing Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. THREAD MANUFACTURING Screw

More information

Worm Gears. Direction of Rotation and Thrust Right Hand. Right Hand Worm and Gear. Single, Double, Quadruple Thread Worms G-57

Worm Gears. Direction of Rotation and Thrust Right Hand. Right Hand Worm and Gear. Single, Double, Quadruple Thread Worms G-57 Worm Gears Originally, worm gearing was used to secure, by compact means, a large reduction of speed between driving and driven shafts with a proportionate increase (except for frictional loss) in the

More information

Section 4: Synchronous Belt Drives

Section 4: Synchronous Belt Drives SYNCHRONOUS Drives Section : 4 Section 4: Synchronous Drives Offering high power transmission combined with accurate positioning in a compact drive envelope, Fenner synchronous drives continue to push

More information

MF Power Resistor Ltd 1

MF Power Resistor Ltd  1 Silicon Coate Wire-Woun Power Resistor with mounting fixture - These resistors are suitable as loaing resistors, braking resistor, capacitor ischarge, Resistive oa simulation, Machinery, Machinery an Equipment

More information

CONTI SYNCHROBELT Synchronous Drive Belts

CONTI SYNCHROBELT Synchronous Drive Belts ContiTech Power Transmission Systems CONTI SYNCHROBELT Synchronous Drive Belts ContiTech Division of Continental AG ContiTech Specialist in rubber and plastics technology The ContiTech Division is a development

More information

PLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE

PLQE. The base of the economy gearboxes with square output flange. Economy Line. Formerly PLE 20 ormerly PL The base of the economy gearboxes with square output flange The PL series with square output flange. A powerful alternative for additional higher radial and axial loads. Low backlash High

More information

Machine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX

Machine Design II Prof. K.Gopinath & Prof. M.M.Mayuram. Module 2 - GEARS. Lecture 17 DESIGN OF GEARBOX Module 2 - GEARS Lecture 17 DESIGN OF GEARBOX Contents 17.1 Commercial gearboxes 17.2 Gearbox design. 17.1 COMMERCIAL GEARBOXES Various commercial gearbox designs are depicted in Fig. 17.1 to 17.10. These

More information

Different versions of BF40 & BF Order Code BF40 E ,7 - RH1. index. different versions of bf40 & bf80 & Order code

Different versions of BF40 & BF Order Code BF40 E ,7 - RH1. index. different versions of bf40 & bf80 & Order code Belt Conveyor Svanemærket tryksag 541-713 index different versions of bf40 & bf80 & Order code Different Versions of BF40 & BF80 Index Belt Conveyor Type BF40E Different versions of BF40 & BF80... 3 Order

More information

Gearing group, all types of gearing used in machine construction, gear combinations.

Gearing group, all types of gearing used in machine construction, gear combinations. SECTION V \s. 65 80 Gearing group, all types of gearing used in machine construction, gear combinations. MECHANICAL MODELS 31 Section V 65. Spur gears. Gears are used to transmit power from one shaft

More information

CONTI SYNCHROBELT HTD Synchronous Drive Belts

CONTI SYNCHROBELT HTD Synchronous Drive Belts ContiTech Power Transmission Systems CONTI SYNCHROBELT HTD Synchronous Drive Belts ContiTech Division of Continental AG ContiTech Specialist in rubber and plastics technology The ContiTech Division is

More information

3Pallet. Handling Conveyor. No.3of 7. Designed for flexibility and heavy duty usage - up to 1500kg per pallet

3Pallet. Handling Conveyor. No.3of 7. Designed for flexibility and heavy duty usage - up to 1500kg per pallet 3Pallet No.3of 7 Handling Conveyor Designed for flexibility and heavy duty usage - up to 1500kg per pallet 2 3 4 Belt Conveyor For careful and extremely low noise conveying. 1 Lineshaft Powered Roller

More information

L1 (Standard Motor Length) L2 (Brake Motor Length) Nm :1 SBD

L1 (Standard Motor Length) L2 (Brake Motor Length) Nm :1 SBD HepcoMotion S Motor onnections Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and

More information

Machinist Level 3 Rev. January 2001

Machinist Level 3 Rev. January 2001 Level 3 C3 Trade Mathematics III Duration: 24 hours 24 hours 0 hours This unit introduces the Machinist apprentice to the principles of trade mathematics and is designed to meet the requirements of the

More information

LECTURE 15: LINEAR ARRAY THEORY - PART I

LECTURE 15: LINEAR ARRAY THEORY - PART I LECTURE 5: LINEAR ARRAY THEORY - PART I (Linear arrays: the two-element array; the N-element array with uniform amplitue an spacing; broa - sie array; en-fire array; phase array). Introuction Usually the

More information

GLYDEA TM DIRECT DRIVE MOTORIZED CURTAIN TRACK SPECIFICATION DOCUMENT

GLYDEA TM DIRECT DRIVE MOTORIZED CURTAIN TRACK SPECIFICATION DOCUMENT GLYDEA TM DIRECT DRIVE MOTORIZED CURTAIN TRACK SPECIFICATION DOCUMENT 1.- GLYDEA TM SYSTEM. DEFINITION AND BENEFITS 1.1.- GLYDEA TM SYSTEM OVERVIEW 1.2.- GLYDEA M SYSTEM BENEFITS 2.- ARCHITECTS SPECIFICATIONS

More information

A Novel Speed Control Strategy for Five Phases Permanent Magnet Synchronous Motor with Linear Quadratic Regulator

A Novel Speed Control Strategy for Five Phases Permanent Magnet Synchronous Motor with Linear Quadratic Regulator International ournal of Computer an Electrical Engineering A Novel Spee Control Strategy for Five Phases Permanent Magnet Synchronous Motor with inear Quaratic egulator N. Venkata amana, V.. N. Sastry2*

More information

Lead Screws with Plastic Nuts. Resin Lead Screws. Combination of Shaft nominal dia. & Lead

Lead Screws with Plastic Nuts. Resin Lead Screws. Combination of Shaft nominal dia. & Lead Screws with Plastic Nuts SUS3SUS33 MRH MRH eatures he Shaft is manufacture from SUS3 or SUS33, which gives excellent corrosion resistance. Wie range of combination of Shaft ia. an are available. MRH incorporates

More information

SOLID MECHANICS DYNAMICS TUTORIAL PULLEY DRIVE SYSTEMS. This work covers elements of the syllabus for the Edexcel module HNC/D Mechanical Principles.

SOLID MECHANICS DYNAMICS TUTORIAL PULLEY DRIVE SYSTEMS. This work covers elements of the syllabus for the Edexcel module HNC/D Mechanical Principles. SOLID MECHANICS DYNAMICS TUTORIAL PULLEY DRIVE SYSTEMS This work covers elements of the syllabus for the Edexcel module HNC/D Mechanical Principles. On completion of this tutorial you should be able to

More information

Automatic Belt Tensioners WARNING: NEVER ATTEMPT TO DISASSEMBLE A BELT TENSIONER, AS SERIOUS INJURY CAN OCCUR! Tensioner Pulley 5054 N/A

Automatic Belt Tensioners WARNING: NEVER ATTEMPT TO DISASSEMBLE A BELT TENSIONER, AS SERIOUS INJURY CAN OCCUR! Tensioner Pulley 5054 N/A Automatic Belt Tensioners Belt tensioners maintain constant tension on the belt to extend both belt and accessory drive bearing life. We offer a full product line covering domestic and import vehicles.

More information

GEAROLOGY 2-1 SPUR GEARS SPUR GEARS

GEAROLOGY 2-1 SPUR GEARS SPUR GEARS GEAROLOGY 2-1 2 2-2 GEAROLOGY COMMON APPLICATIONS: Spur gears are used to Now that you ve been introduced to both Boston Gear and some of the basics of our Gearology course which we like to call Power

More information

Tooling concepts Gear milling

Tooling concepts Gear milling Tooling concepts Gear milling Complete gear-cutting solutions optimized for your needs About ninety percent of all gear wheel manufacturing involves metal cutting. Your main opportunities for rationalizing

More information