Laser Diode Modules. Laser Diodes. Beijing RealLight Technology Co., Ltd.
|
|
- Tyrone Patterson
- 7 years ago
- Views:
Transcription
1 Laser Diode Modules Beijing RealLight Technology Co., Ltd. 1
2 Introduction Beijing RealLight Technology Co., Ltd. is a high technology enterprise specializing in research, development and manufacturing of fiber-pigtailed semiconductor lasers. RealLight s staff consists of a team of laser industry veterans with many years of experience in the assembly and fiber-coupling of semiconductor lasers with various output powers & wavelengths into a variety of package types. RealLight s laser products find a wide range of applications in many fields such as printing, medical treatment and laser pumping. Production takes place in RealLight s own 400 squaremeter clean-room. In addition, a strategic business partner relationship was established in June 2012 between RealLight and Han s TianCheng Semiconductor Co., Ltd. Under the terms of the agreement, RealLight will assume responsibility for marketing and sales of TianCheng s product line of high-power diode lasers. RealLight strives to be your reliable and long term laser supplier, manufacturing high-quality products using advanced manufacturing technologies, combined with delivering a high level of customer service, all at a highly competitive cost. 2
3 660nm 5-50mW Laser Diode Modules G660-5mWF-03BCK-S G660-10mWF-03BCK-S G660-30mWF-03BCK-S G660-50mWF-06BCK-ST Features Output power: 5mW,10mW,30mW,50mW Wavelength: 660nm(635nm optional) Fiber core diameter: 4μm single model 0.13NA Applications Pilot light Medical use Holography technology 660nm Characteristics (25 Power Voltage PD, 50mW) 3
4 Typical Device Performance (25 ) Optical Electrical Fiber Symbol G660-5mWF-03 BCK -S Typical Value G660-10mWF-03 G660-30mWF-03 G660-50mWF-06 Unit BCK -S BCK -S BCK -ST CW Output Power P op mw Center Wavelength λ c 660±5 nm Spectral Width (90% of Power) λ <3 nm Wavelength Shift with Temperature λ/ T 0.2 nm/ Threshold Current I th ma Operating Current I op ma Operating Voltage V op V TEC Max Current I t A TEC Max Voltage V t V (K Ω)/β Thermistor R t ±5%/3477 (25 ) Slope Efficiency η es mw /m A Core Diameter d core 4 μm Cladding Diameter d clad 125 μm Buffer Diameter d buffer 250 μm Numerical Aperture NA Connector FC, ST, SMA905 - Other s Operating Temperature / Storage Temperature / Storage Relative Humidity /% Lead Soldering Temperature, 10s max/ Min Max Package Dimensions (mm) Pin Function 1 Laser (-) Laser (+) ; 2 PD N 3 PD P Pin Function 1 Thermistor 2 Laser (+) 3 TEC (+) 4 TEC (-) 5 Laser (-) 6 Thermistor 2 4
5 793nm 16W Laser Diode Module Functions: PD, Thermistor M793±3-16-F105/22-C1 Features High output power up to16w 105μm core multimode optical fiber 0.22NA Laser pumping Medical use Application 793nm Characteristics (25, 16W) 16.0 Power P-I Curve Volatge V-I Curve Power (W) Voltage (V) Operating Current (A) Wavelength (nm) 3 5
6 Typical Device Performance (25 ) Symbol Typical M793±3-16-F105/22-C1 Unit CW Output Power P op 16 W Optical Center Wavelength λ c 793±3 nm Spectral Width (90% of Power) λ <3.0 nm Wavelength Shift with Temperature λ/ T 0.35 nm/ Threshold Current I th 0.5 A Operating Current I op 2.5 A Electrical Operating Voltage V op 16.0 V Slope Efficiency η es 8.0 W / A Power Conversion Efficiency η ep 40 % Fiber Core Diameter d core 105 μm Fiber Cladding Diameter d clad 125 μm Fiber Fiber Buffer Diameter d buffer 250 μm Other s Numerical Aperture NA Fiber Length L 1.0 m Operating Operating Relative Storage Storage Relative Lead Soldering Temperature, Temperature / Humidity/% Temperature / Humidity/% 10s max/ Min Max Package Dimensions(mm) Pin Function Pin Function 1 Laser(+) 5 Thermistor 2 Laser( -) 6 Thermistor 3 PD (N) 7 NA 4 PD (P) 8 NA 6
7 808nm 2-4W Laser Diode Modules Function: PD G808-2WF-04LTR G808-4WF-04LTR Features a t u r e s Output power: 2-4W Fiber core diameter: 105/200μm 0.22NA Medical use Laser pumping Material processing Applicationss 808nm Characteristics (25,4W) Power VVolta Voltage ge 5 7
8 Typical Device Performance (25 ) Optical Electrical Fiber Symbol Typical Value G808-2WF -04LTR G808-4WF -04LTR Unit CW Output Power P op 2 4 W Center Wavelength λ c 808±3,808±10 nm Spectral Width (90% of Power) λ <3 nm Wavelength Shift with Temperature λ/ T 0.3 nm/ Threshold Current I th A Operating Current I op A Operating Voltage V op V Slope Efficiency η es W / A Core Diameter d core 105,200 μm Cladding Diameter d clad 125,220 μm Buffer Diameter d buffer 250,400 μm Numerical Aperture NA Connector - ST,FC,SMA905 - Other s Operating Storage Storage Relative Lead Soldering Temperature, Temperature / Temperature / Humidity /% 10s max/ MTBF/h Min Max Package Dimensions (mm) Pin Function 1 Laser (+) 2 Laser (-) 3 PD N 4 PD P 8
9 808nm 2-8W Laser Diode Modules Functions: PD, TEC, Thermistor G808-2WF-09HHL-T G808-4WF-09HHL-T G808-5WF-09HHL-T G808-8WF-09HHL-T Features Output Power: 2~8W Wavelength: 808nm Fiber core diameter: 105/200/400μm 0.22NA Applications Medical Use Laser Pumping Material Processing 808nm Characteristics 25,8W Power Voltage 7 9
10 Typical Device Performance (25 ) Optical Electrical Fiber Typical Value Symbol G808-2WF -09 HHL -T G808-4WF -09 HHL -T G808-5WF -09 HHL -T G808-8WF -09 HHL -T Unit CW Output Power P op W Center Wavelength λ c 808±3,808±10 nm Spectral Width (90% of Power) λ <3 nm Wavelength Shift with Temperature λ/ T 0.3 nm/ Threshold Current I th A Operating Current I op A Operating Voltage V op V Slope Efficiency η es W / A PD I mo ma TEC Max Current I t A TEC Max Voltage V t 9.8 V Thermistor Rt 10±5%/3477 (K Ω)/β(25 ) Core Diameter d core 105,200,400 μm Cladding Diameter d clad 125,220,440 μm Buffer Diameter d buffer 250,400,600 μm Numerical Aperture NA Connector - ST,FC,SMA905 - Other s Operating Temperature / Storage Temperature / Package Dimensions (mm) Storage Relative Humidity /% Lead Soldering Temperature, 10s max/ MTBF/h Min Max Pin Function Pin Function 1 TEC(-) 6 Laser(-) 2 Case 7 PD P 3 Laser(+) 8 PD N 4 Thermistor 9 TEC (+) 5 Thermistor 10
11 808nm 7.5W Detachable Laser Diode Module Functions: PD,TEC,Thermistor,Detachable Fiber,Aiming Beam, Fiber Detector G WD-14HHL-PTFS Features Features Output power: 7.5W Wavelength: 808nm Aiming beam: 650nm Fiber coupling for: 200μm,0.22NA Fiber detector Applications Applications Medical use Material processing 808nm Characteristics (25 Power,7.5W) Power Voltage 9 11
12 Typical Device Performance (25 ) Optical Pilot beam Electrical Connector Date Other s Package Dimensions (mm) Symbol Typical Value G WD - 14HHL - PTFS CW Output Power P op 7.5 W Center Wavelength λ c 808±3, 808±10 nm Spectral Width (90% of Power) λ <3 nm Wavelength Shift with Temperature λ/ T 0.3 nm/ Output Power P a >2 mw Wavelength λ a 650±10 nm Voltage V a 2.2, 5.0 V Current <30 ma I a Threshold Current I th 0.6 A Operating Current I op 12 A Operating Voltage V op 1.9 V Slope Efficiency η es W / A PD I mo ma TEC Max Current I t 6 A TEC Max Voltage V t 9.8 V Thermistor R t 10±5%/3477 (K Ω)/β(25 ) Design For Fiber Core Diameter d core 200,400 μm Design For Fiber Numerical Aperture NA Connector - ST,FC,SMA905 - Operating Temperature / Storage Temperature / Storage Relative Humidity /% Lead Soldering Temperature, 10s max/ Unit MTBF/h Min Max Pin Function Pin Function 1 Case 8 TEC None - 2 Laser + 9 Fiber Detection PDP 3 Thermistor 10 Fiber Detection LED(-) 4 Thermistor 11 Fiber Detection LED(+) Fiber Detection PDN 5 Laser - 12 Aiming Beam LD + 6 PD(P) 13 Aiming Beam LD - 7 PD(N) 14 TEC
13 830nm SLED Functions: TEC,Thermistor GS830-1mWF-14DIP-S Features Wavelength: :830±10nm SLED SLED High stability 14DIP Package package Fiber and connector available for customer for customer design design TEC & driver integrated Fiber sensor OCT Smart grid Optical measurement Applications 830nm SLED Characteristics (25 ) Driver Module P 11 13
14 Typical Device Performance (25 ) Optical Electrical Fiber Symbol CW Output Power and stability P op Typical Value GS830-1mWF-14DIP-S Unit >1 mw ±1.5% Center Wavelength λ c 830±10 nm Spectral Width λ >30 nm Operating Current I op 120 ma Operating Voltage V op 1.9 V PD Current I mo - ua TEC Max Current I t 1.8 A TEC Max Voltage V t 3.2 V - (8hour) Thermistor R t 10±5%/3477 (K Ω)/β(25 ) Fiber Type - Single Mode - Fiber Tail Length L 0.3 m Connector - ST,FC,SMA905 - Other s Operating Operating Relative Storage Relative Lead Soldering Temperature, Storage Temperature / Temperature / Humidity /% Humidity /% 10s max/ Min Max Package Dimensions (mm) Pin Function Pin Function 1 TEC(+) Laser (-) 3-10 Laser (+) 4-11 Thermistor 5 Laser (+) 12 Thermistor TEC( -) 12 14
15 830nm 1W Laser Diode Module G830-1WF-02BCK Features Output power: 1W Wavelength: 830nm Fiber core diameter: 60μm 0.14NA Printing Applications 830nm Characteristics(25,1W) Power Voltage 13 15
16 Typical Device D evice Performance(25 ) Optical Electrical Fiber Symbol Typical Value Unit G830-1WF-02BCK CW Output Power P op 1 W Center Wavelength λ c 830±10 nm Spectral Width (90% of Power) λ <3 nm Wavelength Shift with Temperature λ/ T 0.3 nm/ Threshold Current I th 0.2 A Operating Current I op 1.4 A Operating Voltage V op 2.1 V Slope Efficiency η es 0.8 W / A Core Diameter d core 60 μm Cladding Diameter d clad 125 μm Buffer Diameter d buffer 250 μm Numerical Aperture NA Connector - ST - Other s Operating Temperature / Storage Temperature / Storage Relative Humidity /% Lead Soldering Temperature, 10s max/ MTBF/h Min Max Package Dimensions(mm) Pin Function 1 Laser(+) 2 Laser(-) 16
17 976nm 10W Detachable Laser Diode Module Functions:PD,TEC,Thermistor,Detachable Fiber, Aiming Beam,Fiber Detector G980-10WD-14HHL-PTFS Features Output power: 10W Wavelength: 976nm Aiming beam: 650nm Fiber coupling for: 200μm,0.22NA Fiber detector Applications Medical use Material processing 976nm Characteristics (25,10W) 15 17
18 Typical Device Performance (25 ) Optical Pilot beam Electrical Connector Date Other s Package Dimensions (mm) Symbol Typical Value G980-10WD-14HHL -PTFS CW Output Power P op 10 W Center Wavelength λ c 976±3, 976±10 nm Spectral Width (90% of Power) λ <3 nm Wavelength Shift with Temperature λ/ T 0.3 nm/ Output Power P a >2 mw Wavelength λa 650±10 nm Voltage V a 2.2, 5.0 V Current <30 ma I a Threshold Current I th 0.6 A Operating Current I op 12 A Operating Voltage V op 1.9 V Slope Efficiency η es W / A PD I mo ma TEC Max Current I t 6 A TEC Max Voltage V t 9.8 V Thermistor R t 10±5%/3477 (K Ω)/β(25 ) Design For Fiber Core Diameter d core 200,400 μm Design For Fiber Numerical Aperture NA Connector - ST,FC,SMA905 - Operating Temperature / Storage Temperature / Storage Relative Humidity /% Lead Soldering Temperature, 10s max/ Unit MTBF/h Min Max Pin Function Pin Function 1 Case 8 TEC None - 2 Laser + 9 Fiber Detection PDP 3 Thermistor 10 Fiber Detection LED(-) 4 Thermistor 11 Fiber Detection LED(+) Fiber Detection PDN 5 Laser - 12 Aiming Beam LD + 6 PD(P) 13 Aiming Beam LD - 7 PD(N) 14 TEC
19 9XXnm 25-30W Laser Diode Module M9XX±10-25-F105/15-T3 M M9XX±10-30-F105/22-T3 M Features High output power: 25W, 30W 105μm core multimode optical fiber 0.15NA, 0.22NA Fiber laser feedback protection 915nm, 940nm and other 9XXnm wavelength Electrically isolated housing Laser pumping Medical use Material processing Applications 915nm Characteristics 25, 25W 25 Power P-I Curve Volatge V-I Curve Power (W) Voltage (V) Operating Current (A) Wavelength (nm) 19
20 Typical Device Performance (25 ) Symbol M9XX±10-25-F105/15-T3 Typical M9XX±10-30-F105/22-T3 Unit CW Output Power P op W Center Wavelength λ c 915,940 and other 9XX wavelength,±10 nm Optical Spectral Width (90% of Power) λ <6.0 nm Wavelength Shift with Temperature λ/ T 0.35 nm / Feedback Protection ( nm) FP >40 db Threshold Current I th 0.65 A Operating Current I op A Electrical Operating Voltage V op V Slope Efficiency η es 2.7 W / A Power Conversion Efficiency η ep 48 % Fiber Core Diameter d core 105 μm Fiber Cladding Diameter d clad 125 μm Fiber Fiber Buffer Diameter d buffer 250 μm Numerical Aperture NA Fiber Length L 1.0 m Other s Operating Operating Relative Storage Storage Relative Lead Soldering Temperature, Temperature / Humidity /% Temperature / Humidity /% 10s max/ Min Max Package Dimensions (mm) Pin Function 1 Laser(+) 2 Laser( -) 20
21 9XXnm 35-40W Laser Diode Modules M9XX±10-35-F105/15-T4S M9XX±10-40-F105/22-T4S Features High output power: 35W,40W 105μm core multimode optical fiber 0.15NA, 0.22NA Fiber laser feedback protection 915nm, 940nm and other 9XXnm wavelength Electrically isolated housing Applications Laser pumping Medical use Material processing 915nm Characteristics (25, 35W) Power P-I Curve Volatge V-I Curve Power (W) Voltage (V) Operating Current (A) Wavelength (nm) 19 21
22 Typical Device Performance (25 ) Typical Symbol Unit M9XX±10-35-F105/ 15-T4S M9XX±10-40-F105/22 -T4S CW Output Power P op W Center Wavelength λ c 915,940 and other 9XX wavelength,±10 nm Optical Spectral Width (90% of Power) λ <6.0 nm Wavelength Shift with Temperature λ/ T 0.35 nm/ Feedback Protection ( nm) FP >40 db Threshold Current I th 0.65 A Operating Current I op A Electrical Operating Voltage V op V Slope Efficiency η es 3.6 W / A Power Conversion Efficiency η ep 48 % Fiber Core Diameter d core 105 μm Fiber Cladding Diameter d clad 125 μm Fiber Fiber Buffer Diameter d buffer 250 μm Numerical Aperture NA Fiber Length L 1.0 m Other s Operating Temperature / Operating Relative Humidity /% Storage Temperature / Storage Relative Humidity /% Lead Soldering Temperature,10s max/ Min Max Package Dimensions mm Pin Function 1 Laser(+) 2 Laser( -) 22
23 9XXnm 70W High Power Laser Diode Module Functions: PD, Thermistor M9XX±10-70-F105/22-C1 Features High output power: 70W 105μm core multimode optical fiber 0.22NA Electrically isolated housing Fiber laser feedback protection 915nm,940nm and other 9XXnm wavelength optional Laser pumping Medical use Material processing Applications 915nm Characteristics 25, 70W Power P-I Curve Volatge V-I Curve Power (W) Voltage (V) Operating Current (A) Wavelength (nm) 21 23
24 Typical Device Performance (25 ) Typical Symbol Unit M9XX±10-70-F105/22-C1 CW Output Power P op 70 W Optical Center Wavelength λc 915,940 or other 9XX wavelength ±10 nm Spectral Width (90% of Power) λ <6.0 nm Wavelength Shift with Temperature λ/ T 0.35 nm/ Feedback Protection( nm) FP >40 db Threshold Current I th 0.65 A Operating Current I op 10 A Electrical Operating Voltage V op 14 V Slope Efficiency η es 7.5 W / A Power Conversion Efficiency η ep 50 % Fiber Core Diameter d core 105 μm Fiber Cladding Diameter d clad 125 μm Fiber Fiber Buffer Diameter d buffer 250 μm Numerical Aperture NA Fiber Length L 1.0 m Other s Operating Temperature / Operating Relative Humidity/% Storage Temperature / Storage Relative Humidity/% Lead Soldering Temperature, 10s max/ Min Max Package Dimensions(mm) Pin Function Pin Function 1 Laser(+) 5 Thermistor 2 Laser( -) 6 Thermistor 3 PD (N) 7 NA 4 PD (P) 8 NA 24
25 976nm 9W wavelength-stabilized Laser Diode Module Functions: PD, Thermistor M976±0.5-9-F105/22-T1 Narrow line width<0.5nm 976nm wavelength locked Output power: 9W 105μm core 0.22NA multimode optical fiber Fiber laser feedback protection Electrically t isolated hous housing Laser pumping Features Applications 976nm Wavelength Locked Characteristics (25, 9W) Powe r Vo ltage Power (W) Voltage (V) Operating Current (A)
26 Typical Device Performance (25 ) Symbol Typical Unit CW Output Power P op 9.0 W Optical Electrical Fiber Center Wavelength λ 976±0.5 nm Spectral Width (90% of Power) λ <0.5 nm Wavelength Shift with Temperature λ/ T 0.02 nm / Wavelength Shift with Current λ/ I op 0.05 nm / A Feedback Protection ( nm) FP >40 db Threshold Current I th 0.65 A Operating Current I op 12.0 A Operating Voltage V op 1.8 V Slope Efficiency η es 0.80 W / A Power Conversion Efficiency η ep 42 % Fiber Core Diameter d core 105 μm Fiber Cladding Diameter d clad 125 μm Fiber Buffer Diameter d buffer 250 μm Numerical Aperture NA Fiber Length L 1.0 m Other s Operating Temperature / Operating Relative Humidity /% Storage Temperature / Storage Relative Humidity /% Lead Soldering Temperature, 10s max/ Min Max Package Dimensions (mm) Pin Function 1 Laser(+) 2 Laser( -) 3 Thermistor 4 Thermistor 5 PD (N) 6 PD (P) 26
27 976nm 35W wavelength-stabilized Laser Diode Module M976± F105/22-T4S Features Narrow line width<0.5nm 976nm wavelength locked Output power: 35W 105μm core 0.22NA multimode optical fiber Fiber laser feedback protection Electrically isolted housing Fiber laser pumping Applications 976nm Wavelength Locked Characteristics (25, 35W ) P-I Power Curve V-I Volatge Curve Power (W) Voltage (V) Operating Current (A)
28 Typical Device Performance (25 ) Symbol Typical Unit CW Output Power P op 35.0 W Center Wavelength λ 976±0.5 nm Optical Electrical Fiber Spectral Width (90% of Power) λ <0.5 nm Wavelength Shift with Temperature λ/ T 0.02 nm / Wavelength Shift with Current λ/ I op 0.05 nm / A Feedback Protection ( nm) FP >40 db Threshold Current I th 0.65 A Operating Current I op 12.0 A Operating Voltage V op 7.0 V Slope Efficiency η es 3.2 W / A Power Conversion Efficiency η ep 42 % Fiber Core Diameter d core 105 μm Fiber Cladding Diameter d clad 125 μm Fiber Buffer Diameter d buffer 250 μm Numerical Aperture NA Fiber Length L 1.0 m Other s Operating Temperature / Operating Relative Humidity /% Storage Temperature / Storage Relative Humidity /% Min Lead Soldering Temperature, 10s max/ Min Package Dimensions (mm) Pin Function 1 Laser (+) 2 Laser (-) 28
29 976nm 60W wavelength-stabilized Laser Diode Module Functions: PD, Thermistor M976± F105/22-C1 High output power: 60W Narrow line width<0.5nm 976nm wavelength locked 105μm core 0.22NA multimode optical fiber Electrically isolated housing Fiber laser feedback protection Fiber laser pumping Features Applications 976nm Wavelength Locked Characteristics (25, 60W) 27 29
30 Typical Device Performance (25 ) Typical Symbol M976± F105/22-C1 Unit CW Output Power P op 60 W Center Wavelength λc 976±0.5 nm Optical Spectral Width (90% of Power) λ <0.5 nm Wavelength Shift with Temperature λ/ T 0.02 nm/ Wavelength Shift with Current λ/ I op 0.05 nm / A Feedback Protection( nm) FP >40 db Threshold Current I th 0.65 A Operating Current I op 11 A Electrical Operating Voltage V op 14 V Slope Efficiency η es 5.8 W / A Power Conversion Efficiency η ep 40 % Fiber Core Diameter d core 105 μm Fiber Cladding Diameter d clad 125 μm Fiber Fiber Buffer Diameter d buffer 250 μm Numerical Aperture NA Fiber Length L 1.0 m Other s Operating Operating Relative Storage Storage Relative Lead Solderi ng Temperature, Temperature/ Humidity /% Temperature / Humidity /% 10s max/ Min Max Package Dimensions (mm) Pin Function Pin Function 1 Laser(+) 5 Thermistor 2 Laser(- ) 6 Thermistor 3 PD (N) 7 NA 4 PD (P) 8 NA 30
31 Fiber Bundled Modules Features Output power: by customer design Wavelength: 6XXnm,808nm,9XXnm,1064nm,1550nm Fiber bundle diameter: 400/800μm, NA:0.22 Pilot light, PD, thermistor, TEC Optional Applications Medical use IIIumination Material processing Pumping source Typical Device Performance (25 ) Symbol Typical value Unit Optical Electrical Fiber Other Functions Center Wavelength λ c 6XX 808 9XX nm CW Output Power P op ~3 ~30 ~30 ~18 ~6 W λ Tolerance - ±3,±10 ±15 nm Wavelength Shift with Temperature λ/ T 0.3 nm/ Threshold Current I th ~0.6 ~0.6 ~ A Operating Current I op ~1.2 ~5.5 ~ A Operating Voltage V op ~14 V Slope Efficiency η es ~7 W / A Fiber Bundle Diameter d core 400/800 μm Numerical Aperture NA Connector - ST,FC,SMA905 - Pilot light, PD, Thermistor, TEC Optional 29 31
32 GCTP Series V-groove Fiber Array GCTP-32-S(D) GCTP-64-S(D) Features NA: , Customer design service available Fiber number: 32, 64; Single array or double array CTP printing Medical use Applications Typical Device Performance (25 ) Typical Value GCTP -32-S(D) GCTP -64-S(D) Unit Fiber center interval 127 μm Horizontal precision of fiber position ±1.5 μm Vertical precision of fiber position ±3 μm Transmission >90 % Fiber numbers Fiber Core Diameter 60 μm Fiber Cladding Diameter 125 μm Numerical Aperture Fiber Length <5 m Connector ST\FC\SMA905 - Package Dimensions (mm) Fiber Number: 32 Fiber Number:
33 High Power Red Collimated Laser Functions: PD, TEC, Thermistor G808-2WF-09HHL-T G808-4WF-09HHL-T Engineering Sample G808-5WF-09HHL-T G808-8WF-09HHL-T Features 29 Output power: 3~4W Wavelength: 635nm (660nm Optional) Window output: 4 4mm Beam divergence: <2mrad Laser display Medical use Applications Typical Device Performance (25 ) Symbol Typical Value Unit CW Output Power P op 3~4 W Center Wavelength λ c 635±5 nm Optical Spectral Width (90% of Power) λ <3 nm Wavelength Shift with Temperature λ/ T 0.3 nm/ Threshold Current I th 50 ma Electrical Operating Current I op 165 ma Operating Voltage V op 81~108 V Emitting Area Dimensions W H 4 4 mm Beam Divergence θ <2 mrad Package Dimension L W H mm Other s Operating Storage Storage Relative Lead Soldering Temperature, Temperature / Temperature / Humidity /% 10s max/ MTBF/h Min Max
34 Work Shop Facility Quality Control 12/15 / V4 / HW / real-light/high-power-laser-diodes 34
SpectraTec II. Polarized Multi-Laser Source BLUE SKY RESEARCH WAVELENGTHS. The SpectraTec II
BLUE SKY RESEARCH The SpectraTec II, two wavelength laser module is a highly integrated system comprised of two lasers, individual driving and temperature control electronics, wavelength combining, and
More informationUn-cooled Multimode Pump Laser Module for Telecom Applications
Un-cooled Multimode Pump Laser Module for Telecom Applications BMUT series Features: High fiber output power, up to 6.0W 0.22NA, 105μm core multimode fiber pigtail Hermetically sealed 2 pin package Floating
More informationVertical Cavity Surface Emitting Laser OPV300, OPV310, OPV310Y, OPV314, OPV314Y
Features: 850nm Technology Data rates up to 2.5 Gbps High thermal stability Low drive current / high output density Narrow and concentric beam angle Recommended for mul mode fiber applica ons Burned in
More informationHIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS
NEW HIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS Features: New! Reduced size and cost versions Reliable high power handling: As much as 80 Watts High Isolation, up to 50dB isolation possible from
More informationAir-Cooled, Direct-Diode Laser System. IDL Series
Air-Cooled, Direct-Diode Laser System IDL Series www.lumentum.com Data Sheet IDL Series air-cooled, direct-diode laser systems combine our high-reliability L4 diode lasers with a unique fused-fiber individual-emitter
More informationDIRECTIONAL FIBER OPTIC POWER MONITORS (TAPS/PHOTODIODES)
Features: DIRECTIONAL FIBER OPTIC POWER MONITORS (TAPS/PHOTODIODES) PATENT NUMBERS: CANADA 2,494,133, USA 7095931, 7295731 AND CHINA 1672073 Telcordia GR-468 qualified Available in versions for any wavelength
More informationHigh-Reliability Diode Lasers for Gesture Recognition. Applying Telecommunications Reliability Design to Consumer Electronics
High-Reliability Diode Lasers for Gesture Recognition Applying Telecommunications Reliability Design to Consumer Electronics www.lumentum.com Application Note A wide range of consumer-electronics applications
More informationL-LAS-TB-CL serie. laser light curtains for inline measuring tasks
L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output
More informationSINGLEMODE OR MULTIMODE FIBER OPTIC PATCHCORDS
Features: SINGLEMODE OR MULTIMODE FIBER OPTIC PATCHCORDS Low insertion loss < 0.2 db Excellent repeatability FC/PC, SC, ST, LC, MU, E2000 termination available Custom ferrule termination available Designed
More informationSingle Photon Counting Module COUNT -Series
Description Laser Components COUNT series of s has been developed to offer a unique combination of high photon detection efficiency, wide dynamic range and ease of use for photon counting applications.
More informationHigh Brightness Fiber Coupled Pump Laser Development
High Brightness Fiber Coupled Pump Laser Development Kirk Price, Scott Karlsen, Paul Leisher, Robert Martinsen nlight, 548 NE 88 th Street, Bldg. E, Vancouver, WA 98665 ABSTRACT We report on the continued
More information3.0mm (1.2") 8 8 Hyper Red Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-30881XVB
.mm (.") Hyper Red Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-XVB Spec No: WA/B Rev No: V. Date:Sep// Page of Features:.inch (.mm) Matrix height. Colors: Hyper Red. Flat package and light
More information100-W, 105-µm, 0.15NA Fiber Coupled Laser Diode Module
Copyright 29 Society of Photo-Optical Instrumentation Engineers. This paper was published in the proceedings of the SPIE Photonics West 29, Vol. 7198-29 (29), High-Power Diode Laser Technology and 1-W,
More informationTechnical Data Sheet 3mm Infrared LED, T-1
Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength p=85nm 2.54mm Lead spacing Low forward voltage Pb free HIR24 Descriptions EVERLIGHT s infrared
More informationPhoto Modules for PCM Remote Control Systems
Photo Modules for PCM Remote Control Systems Available types for different carrier frequencies Type fo Type fo TSOP183 3 khz TSOP1833 33 khz TSOP1836 36 khz TSOP1837 36.7 khz TSOP1838 38 khz TSOP184 4
More informationReflective Optical Sensor with Transistor Output
Reflective Optical Sensor with Transistor Output Description The NY7 has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence
More informationHow To Use A Kodak Kodacom 2.5D (Kodak) With A Power Supply (Power Supply) And Power Supply
Reflective Optical Sensor with Transistor Output Description The CNY7 has a compact construction where the emitting light source and the detector are arranged in the same direction to sense the presence
More informationLuckylight. 3.0mm (1.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-30881XUYB
3.mm (.") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-388XUYB Spec No: W88A/B Rev No: V. Date:Sep/3/8 Page: OF 6 Features:.inch (3.mm) Matrix height. Colors: Super Yellow.
More informationDIODE PUMPED CRYSTALASER
DIODE PUMPED CRYSTALASER Ultra-compact CW & Pulsed Turnkey Systems UV Visible to IR High Reliability High Stability High Efficiency TEMoo & SLM Low Noise Low Cost ULTRA-COMPACT DIODE-PUMPED CRYSTAL LASER
More informationMillijoules high master-slave pulse ratio 532 nm picosecond laser
Millijoules high master-slave pulse ratio 532 nm picosecond laser Zhao You Fan Zhongwei 1, Bai Zhenao 12, Zhang Guoxin 2, Lian Fuqiang 12, Zhao You 3, Shen Ming 3 1 Academy of Opto-Electronics, Chinese
More informationM-D,T,Q-series BroadLighter. Benchtop Broadband Light Source with Extended Bandwidth. Technical Product Specification
M-D,T,Q-series BroadLighter. Benchtop Broadband Light Source with Extended Bandwidth. Technical Product Specification Document ID: SL.RD.04.002.150723 July 2015 Revision: 001 ATTENTION ELECTROSTATIC SENSITIVE
More informationMore colors, more power, more applications... Solid state laser Diode laser Line laser Multicolor laser Laser diode driver Cooling modules
PEGASUS Linienlaser Diodenlaser Festkörperlaser PEGASUS LASERSYSTEME GMBH More colors, more power, more applications... Solid state laser Diode laser Line laser Multicolor laser Laser diode driver Cooling
More informationData Sheet. HFBR-0600Z Series SERCOS Fiber Optic Transmitters and Receivers
HFBR-0600Z Series SERCOS Fiber Optic Transmitters and Receivers Data Sheet SERCOS SERCOS is a SErial Realtime COmmunication System, a standard digital interface for communication between controls and drives
More information3.0*3.0mm (1.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-R30881XUYB
3.*3.mm (.2") 8 8 Super Yellow Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-R388XUYB Spec No: W288A/B Rev No: V.2 Date: Sep/8/27 Page: OF 6 Features:.2inch (3.7mm) Matrix height. Colors:Super
More informationQuasi-Continuous Wave (CW) UV Laser Xcyte Series
COMMERCIAL LASERS Quasi-Continuous Wave (CW) UV Laser Xcyte Series Key Features 355 nm outputs available Quasi-CW UV output Field-proven Direct-Coupled Pump (DCP ) TEM00 mode quality Light-regulated output
More informationEMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16290(LED TYPES) EXAMINED BY : FILE NO. CAS-10251 ISSUE : JUL.03,2001 TOTAL PAGE : 7
EXAMINED BY : FILE NO. CAS-10251 EMERGING DISPLAY ISSUE : JUL.03,2001 APPROVED BY: TECHNOLOGIES CORPORATION TOTAL PAGE : 7 VERSION : 1 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 16290(LED TYPES) FOR
More information8.5Gb/s SFP+ Fibre Channel Optical Transceiver
8.5Gb/s SFP+ Fibre Channel Optical Transceiver Features Up to 8.5Gb/s bi-directional data links Hot Pluggable SFP+ footprint Built-in digital diagnostic functions 1310nm FP laser transmitter Duplex LC
More informationY.LIN ELECTRONICS CO.,LTD.
Features Current transfer ratio (CTR 50~600% at I F =5mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Creepage distance >7.62 mm Operating temperature up to +110 C Compact
More informationDATA SHEET DVI - HDCP Extension Cable
DATA SHEET DVI - HDCP Extension Cable Contents Description Features Absolute Maximum Ratings Recommended Operating Conditions Electrical Power Supply Characteristics Receiver Electrical Interface Specifications
More informationHigh-Performance Wavelength-Locked Diode Lasers
Copyright 29 Society of Photo-Optical Instrumentation Engineers. This paper was published in the proceedings of the SPIE Photonics West 29, Vol. 7198-38 (29), High-Power Diode Laser Technology and High-Performance
More informationOptical Power Meter. Specification & User Manual
Optical Power Meter Specification & User Manual Page 1 of 9 Copyright 2011 reserves the right to modify specifications without prior notice Table of Contents 1. Description and Features.......3 2. Specification......4
More informationAMPLIFIED HIGH SPEED FIBER PHOTODETECTOR USER S GUIDE
AMPLIFIED HIGH SPEED FIBER PHOTODETECTOR USER S GUIDE Thank you for purchasing your Amplified High Speed Fiber Photodetector. This user s guide will help answer any questions you may have regarding the
More informationBar Code Reader Series BCL 20 A flexible reader for a variety of applications
Bar Code Reader Series BCL 20 A flexible reader for a variety of applications PRODUCT INFORMATION The benchmark for flexibility. Laser scanners of the BCL 20 series as variable as your requirements demand.
More informationLuckylight. 1.9mm (0.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-20882XWB-Y
.9mm (.8") 8 8 White Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-88XWB-Y Spec No: W88C/D Rev No: V. Date: Sep// Page: OF Features:.8inch (.mm) Matrix height. Colors: White. Flat package
More informationIntroduction to Optical Link Design
University of Cyprus Πανεπιστήµιο Κύπρου 1 Introduction to Optical Link Design Stavros Iezekiel Department of Electrical and Computer Engineering University of Cyprus HMY 445 Lecture 08 Fall Semester 2014
More informationWavelength stabilized high-power diode laser modules
Wavelength stabilized high-power diode laser modules Bernd Köhler *, Thomas Brand, Matthias Haag, Jens Biesenbach DILAS Diodenlaser GmbH, Galileo-Galilei-Str. 10, 55129 Mainz-Hechtsheim, Germany ABSTRACT
More informationModule 13 : Measurements on Fiber Optic Systems
Module 13 : Measurements on Fiber Optic Systems Lecture : Measurements on Fiber Optic Systems Objectives In this lecture you will learn the following Measurements on Fiber Optic Systems Attenuation (Loss)
More informationGuideline Laser Series
Guideline Laser Series Highly visible alignment laser for visually demanding surfaces Red / Green long visible lines Equal brightness across length of the line Uniform Line (no fading at ends of the line)
More informationOptical Fiber Switches
Optical Fiber Switches volume 2 contents 1 introduction 3 Piezo electrically driven optical switches 3 2 technology 4 Important parameters to characterize an optical fi ber switch 4 Multimode switches
More information155Mbps/1250Mbps SFP Bi-Directional Transceiver, 40km Reach 1310nm TX / 1550 nm RX
Features 155Mbps/1250Mbps SFP Bi-Directional Transceiver, 40km Reach 1310nm TX / 1550 nm RX 1310nm FP laser and PIN photodetector for 40km transmission Compliant with SFP MSA and SFF-8472 with simplex
More informationLuckylight. 60.20mm (2.4") 8 8 RGB color Dot Matrix LED Displays Technical Data Sheet. Model No.: KWM-50884XRGBB
6.2mm (2.4") RGB color Dot Matrix LED Displays Technical Data Sheet Model No.: KWM-54XRGBB Spec No: W23A/BRGB Rev No: V.2 Date:Sep//29 Page: OF 9 Features: 2.4inch (6.2mm) digit height. Excellent segment
More information0.28" Quadruple Digit Numeric Displays. Technical Data Sheet. Model No.: KW4-281XSB
.28" Quadruple Digit Numeric Displays Technical Data Sheet Model No.: KW4-281XSB Spec No.:W2841C/D Rev No.: V.2 Date:Sep/3/29 Page: 1 OF 6 Features:.28 (inch) digit height. Excellent segment uniformity.
More informationTransmissive Optical Sensor with Phototransistor Output
TCST11. up to TCST23. Transmissive Optical Sensor with Phototransistor Output Description This device has a compact construction where the emitting-light sources and the detectors are located face-to-face
More informationSURFACE MOUNT LED LAMP STANDARD BRIGHT 0606
PACKAGE DIMENSIONS 0.075 (1.9) 0.063 (1.6) 0.035 (0.9) TOP 0.047 (1.2) 0.012 (0.3) 0.032 [0.8] SIDE 0.043 [1.1] 1 3 0.020 [0.5] 2 4 BOTTOM CATHODE MASK 1 2 3 4 HER / AlGaAs Red / Yellow (for-34) Green
More informationFiber Optics. Integrated Photo Detector Receiver for Plastic Fiber Plastic Connector Housing SFH551/1-1 SFH551/1-1V
Fiber Optics Integrated Photo Detector Receiver for Plastic Fiber Plastic Connector Housing SFH551/1-1 Features Bipolar IC with open-collector output Digital output, TTL compatible Sensitive in visible
More information# 2. Selecting and Using Thermistors for Temperature Control
# 2 Selecting and Using Thermistors for Temperature Control Selecting and Using Thermistors for Temperature Control Thermally sensitive resistors (thermistors) are used widely in laser diode and detector
More informationHigh-Power Diode Laser Expertise
1 2 3 High-Power Diode Laser Expertise DILAS, the diode laser company, manufactures high-power diode laser components and systems in a wide range of output powers and wavelengths including fiber-coupled,
More information10Gb/s SFP+ LRM 1310nm FP with PIN Receiver 220meters transmission distance
Feature 10Gb/s serial optical interface compliant to 802.3aq 10GBASE-LRM Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module SFP+
More informationSFP-SX with DOM 1.25Gb/s Multi-Mode SFP Transceiver 1000BASE-SX 1.0625Gb/s Fiber Channel
Product Features Compliant to IEEE Std 802.3-2005 Gigabit Ethernet 1000Base-SX, with DOM Specifications according to SFF-8074i and SFF-8472, revision 9.5 Digital Diagnostic Monitoring 850nm Vertical Cavity
More informationHow To Connect A 10Gbps Sfp+ Bi-Directional Transceiver To A Single Mode Fiber With A Single Power Cell (Sfp+) To A Power Cell With A Power Source (Sf) (Sfl) (
Features 10Gbps SFP+ Bi-Directional Transceiver, 20km Reach 1270/1330nm TX / 1330/1270 nm RX Supports 9.95Gb/s to 10.3Gb/s data rates Simplex LC Connector Bi-Directional SFP+ Optical Transceiver Single
More informationSENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression
Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output
More informationSingle Mode Fiber Lasers
Single Mode Fiber Lasers for Industrial and Scientific Applications T h e P o w e r t o T r a n s f o r m T M IPG s Single Mode Fiber Lasers Advantages IPG's YLR-SM Series represents a break-through generation
More informationHDO700 P FIBRE OPTIC TRANSMITTER
Timo Rantanen 18.1.2011 1(5) HDO700 P FIBRE OPTIC TRANSMITTER HDO700 P is a high performance, extremely linear externally modulated 1550 nm transmitter for HDO fibre optic CATV link. This transmitter type
More informationDiscontinued. LUXEON V Portable. power light source. Introduction
Preliminary Technical Datasheet DS40 power light source LUXEON V Portable Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability
More informationLONGLINE 10Gbps 10km SFP+ Optical Transceiver
LONGLINE 10Gbps 10km SFP+ Optical Transceiver Features Optical interface compliant to IEEE 802.3ae 10GBASE-LR Electrical interface compliant to SFF-8431 Hot Pluggable 1310nm DFB transmitter, PIN photo-detector
More informationILX Lightwave Corporation www.ilxlightwave.com
# 14 Optimizing TEC Current Optimizing TEC Drive Current This Application Note discusses methods for optimizing the TEC drive current for optimum operation in heating and cooling applications. BACKGROUND
More informationSPEC NO: DSAJ8637 REV NO: V.6B DATE: JUL/01/2016 PAGE: 1 OF 5 APPROVED:
1.0X0.5mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APHHS1005ZGC Green Features 1.0mmX0.5mm SMD LED, 0.5mm thickness. Low power
More informationBarcode Reader Series BCL 31, BCL 32, BCL 34
P R O D U C T I N F O R M A T I O N Barcode Reader Series BCL 31, BCL 32, BCL 34 BCL 31, BCL 32 and BCL 34: Barcode readers for universal use in conveyor and storage technology. 3 models: numerous advantages.
More information550-xx05-004. 5mm LED CBI. Circuit Board Indicator Square Back Housing, Quad Block. 5 5 0 - x x 0 5-0 x 4
5mm LED CBI Circuit Board Indicator Square Back Housing, Quad Block 5.9 [.235] 3.8 [.145].35 [.250].35 [.250] 25 [.985].35 [.250] Red Cathode for Red/Green Bi-Color Cathode for /Green Bi-Color RECOMMENDED
More informationDTSB35(53)12L-CD20 RoHS Compliant 1.25G 1310/1550nm(1550/1310nm) 20KM Transceiver
产 品 规 格 书 Product Specification Sheet DTSB35(53)12L-CD20 RoHS Compliant 1.25G 1310/1550nm(1550/1310nm) 20KM Transceiver PRODUCT FEATURES Up to 1.25Gb/s data links FP laser transmitter for DTSB35(53)12L-CD20
More informationLZC-00MC40. LedEngin, Inc. High Luminous Efficacy RGB LED Emitter. Key Features. Typical Applications. Description
Key Features High Luminous Efficacy RGB LED Emitter LZC-MC4 Ultra-bright, Ultra-compact 4W RGB LED Full spectrum of brilliant colors with superior color mixing Small high density foot print 9.mm x 9.mm
More informationEMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 16400(LED TYPES) EXAMINED BY : FILE NO. CAS-10068 ISSUE : JAN.19,2000 TOTAL PAGE : 7 APPROVED BY:
EXAMINED BY : FILE NO. CAS-10068 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE : JAN.19,2000 TOTAL PAGE : 7 VERSION : 3 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 16400(LED TYPES) FOR
More informationTechnical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz
Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz The Giga-tronics Model 8003 Precision Scalar Network Analyzer combines a 90 db wide dynamic range with the accuracy and linearity
More informationAutomatisierte, hochpräzise Optikmontage Lösungen für die Industrie
Automatisierte, hochpräzise Optikmontage Lösungen für die Industrie Alexander Steinecker, CSEM Trends in Micro Nano, HSLU, Horw, 5. Dezember 2013 High power laser sources Motivation Laser manufacturing
More informationBPW34. Silicon PIN Photodiode VISHAY. Vishay Semiconductors
Silicon PIN Photodiode Description The is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement of TO-5
More informationThru-Beam 80 to 320 mm 0.05 to 0.08 mm
Series 7069A Fiber Optics The 7069A coupled with the appropriate cable forms a fiber optic sensor controller system capable of detecting objects as small as 0.01mm dia. and color marks on backgrounds of
More informationThe Optical Submarine Repeater and Its Associated Technologies
The Optical Submarine Repeater and Its Associated Technologies YAMAGUCHI Shohei, MIKAMI Satoshi, AIDA Ryuji, NAGASAWA Toshihide Abstract The key to meeting the increasing needs of submarine cable systems
More informationAgilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet
Agilent AEDB-9140 Series Three Channel Optical Incremental Encoder Modules with Codewheel, 100 CPR to 500 CPR Data Sheet Description The AEDB-9140 series are three channel optical incremental encoder modules
More informationTube Liquid Sensor OPB350 / OCB350 Series
Features: Can identify if liquid is present in clear tubes that have an outside diameter of 1/16 [1.6mm], 1/8" [3.2mm], 3/16" [4.8 mm] or 1/4" [6.3 mm] Opaque plastic housing enhances ambient light rejection
More informationEMERGING DISPLAY CUSTOMER ACCEPTANCE SPECIFICATIONS 20400 (LED TYPES) EXAMINED BY : FILE NO. CAS-10184 ISSUE : DEC.01,1999 TOTAL PAGE : 7 APPROVED BY:
EXAMINED BY : FILE NO. CAS-10184 APPROVED BY: EMERGING DISPLAY TECHNOLOGIES CORPORATION ISSUE : DEC.01,1999 TOTAL PAGE : 7 VERSION : 2 CUSTOMER ACCEPTANCE SPECIFICATIONS MODEL NO. : 20400 (LED TYPES) FOR
More informationGaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package
GaAs/GaAlAs IR Emitting Diodes in ø 5 mm Package Description TSIL64 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear, bluegrey tinted plastic packages. In comparison
More informationFiber Optics and Liquid Level Sensors Line Guide
Fiber Optics and Liquid Level Sensors Line Guide Excellence, through every fiber. Honeywell Sensing and Control (S&C) offers fiber optic sensors manufactured with SERCOS (Serial Real-time Communication
More informationLED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6
L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution
More information50W EdiStar. Approved By Customer. Designer Checker Approval. Ultra High Power LED
Ultra High Power LED 50W EdiStar EdiStar Emitter Approved By Customer Designer Checker Approval Date:2006/12/04 Version:Preliminary V0.1 4F, No. 800, Chung-Cheng Rd, Chung-Ho, Taipei 235, Taiwan Tel: 886-2-8227-6996
More informationAmplified High Speed Fiber Photodetectors
Amplified High Speed Fiber Photodetectors User Guide (800)697-6782 sales@eotech.com www.eotech.com Page 1 of 7 EOT AMPLIFIED HIGH SPEED FIBER PHOTODETECTOR USER S GUIDE Thank you for purchasing your Amplified
More informationSurface Mount 905 nm Pulsed Semiconductor Lasers High Power Laser-Diode Family for Commercial Range Finding
Preliminary DATASHEET Photon Detection Surface Mount 5 nm Pulsed Semiconductor Lasers Near field profile Excelitas pulsed semiconductor laser produces very high peak optical pulses centered at a wavelength
More informationMeasuring of optical output and attenuation
Measuring of optical output and attenuation THEORY Measuring of optical output is the fundamental part of measuring in optoelectronics. The importance of an optical power meter can be compared to an ammeter
More informationHarvatek Surface Mount CHIP LED Data Sheet HT-380FCH-ZZZZ
Harvatek Surface Mount CHIP LED Data Sheet Official Product HT Part No. Customer Part No. Data Sheet No. Tentative Product **************** **************** May. 14, 2007 Version of 1.1 Page 1/15 DISCLAIMER...
More information3528 SMD LED. Applications. Signal & Symbol Indicators. Illuminations(illuminated advertising & general lighting). Amusement Machines.
Applications Signal & Symbol Indicators. Illuminations(illuminated advertising & general lighting). Amusement Machines. LCD Backlighting. Indoor & Outdoor Displays. Automobile Interior Lighting. Edition:
More informationIR Edixeon Emitter. 1W Edixeon
High Power LED 1W Edixeon IR Edixeon Emitter Date:2006/06/01 Version:2.0 Device No. : 3-RD-01-E0009 Believe SRL Via Lago di Trasimeno, 21 - Schio (VI) - Italy TEL: +39/0445/579035 FAX: +39/0445/575708
More informationPower over Fiber. Technical Note
Technical Note Power over Fiber This technical note provides guidelines to ensure the proper operation and optimum performance of the JDSU power over fiber (PoF) product family, which consists of a photovoltaic
More information155Mbps ATM-Single Mode Transceiver
SFP, Duplex LC Connector, 1310nm FP LD for Single Mode Fiber, ohs Compliant Features 1310nm FP LD Data ate: 155Mbps, NZ Single +3.3V Power Supply ohs Compliant and Lead-free AC/AC Differential Electrical
More informationLS-1 Series Tungsten Halogen Light Sources Installation and Operation Instructions
LS-1 Series Tungsten Halogen Light Sources Installation and Operation Instructions Description The LS-1 Series of tungsten halogen light sources are versatile, white-light lamps optimized for use in the
More informationKit Highlights and Key Features
AF-OLK6 Series Fiber Optic Test kit (Data Storage Kit) Product: OLK6 Series Date: Aug:2007 Rev: 01 Description The AF-OLK6 series test kits are the complete solution necessary for the installer to test,
More informationIR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications
IR Sensor Module for Reflective Sensor, Light Barrier, and Fast Proximity Applications MECHANICAL DATA Pinning: = OUT, 2 = GND, 3 = V S 2 3 6672 APPLICATIONS Reflective sensors for hand dryers, towel or
More informationSPECIFICATION. PART NO. : MT0380-UV-A 5.0mm ROUND LED LAMP. 3Northway Lane North Latham,New York 12110.
3Northway Lane North Latham,New York 12110. Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION PART NO. : MT0380-UV-A LAMP ATTENTION OBSERVE PRECAUTION
More informationHLCP-J100, HDSP-4820, HDSP-4830 & HDSP-4832 10-Element Bar Graph Array. Features
HLCP-J, HDSP-, HDSP- & HDSP- -Element Bar Graph Array Data Sheet Description These -element LED arrays are designed to display information in easily recognizable bar graph form. The packages are end stackable
More informationHEDS-9000/9100 Two Channel Optical Incremental Encoder Modules. Features. Applications
HEDS-9000/9100 Two Channel Optical Incremental Encoder Modules Data Sheet Description The HEDS-9000 and the HEDS-9100 series are high performance, low cost, optical incremental encoder modules. When used
More informationHigh Performance Visible Laser Diode Scanners
A B ALLEN-BRADLEY High Performance Visible Laser Diode Scanners (Catalog No. 27-LD4z1, -LD4z4 27-LD8z1, -LD8z4) Product Data These high performance, fixed-mount scanners use a Visible Laser Diode (VLD)
More informationWaveReady CFM. Optical Link Monitoring System: Continuous Fiber Monitor
WaveReady CFM Optical Link Monitoring System: Continuous Fiber Monitor www.lumentum.com Data Sheet The Lumentum Continuous Fiber Monitor (CFM) offers a compact, modular solution for performance monitoring
More informationAP1509. 150KHz, 2A PWM BUCK DC/DC CONVERTER. Description. Pin Assignments V IN. Applications. Features. (Top View) GND GND. Output AP1509 GND GND
Description Pin Assignments The series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external
More information155Mbps DFB SFP Optical Transceiver, 120km Reach
155Mbps DFB SFP Optical Transceiver, 120km Reach Features Data-rate of 155Mbps operation DFB 1550nm wavelengths laser and PIN photo detector for 120km transmission Compliant with SFP MSA and SFF-8472 with
More informationSmall Optical Encoder Modules 480lpi Digital Output. Features. Applications VCC 3 CHANNEL A 2 CHANNEL B 4 GND 1
HEDS-9730, HEDS-9731 Small Optical Encoder Modules 480lpi Digital Output Data Sheet Description The HEDS-973X is a high performance incremental encoder module. When operated in conjunction with either
More informationCD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate
CD4001BC/CD4011BC Quad 2-Input NOR Buffered B Series Gate Quad 2-Input NAND Buffered B Series Gate General Description The CD4001BC and CD4011BC quad gates are monolithic complementary MOS (CMOS) integrated
More information550-xx04. 5mm LED CBI Circuit Board Indicator Top View, Single. 5 5 0 x x 0 4 0 1 0 6-9. Features. Custom For custom LEDs contact factory.
.10 [.240] 5mm LED CBI Circuit Board Indicator Top View, Single.10 [.240] RECOMMENDED P.C. HOLE PATTERN A 3.43 [.135] for -0204 to -0404, 5.0 [.197] for all others B.35 [.025] for -0504 to -0704,.508 [.020]
More information: 5050 White LED PKG. Specification Sheet
5050 White LED PKG Specification Sheet For General Lighting 1 / 12 _ 5050 White LED Specification Sheet Approved rank specification for NC LED Iv: Min 5,000mcd (500mcd Sorting) Vf: 3.0 ~ 3.4V (0.1V Sorting)
More informationUSER MANUAL FIBER OPTIC ANALOG TRANSMITTER AND RECEIVER MODULE
USER MANUAL FIBER OPTIC ANALOG TRANSMITTER AND RECEIVER MODULE Table of Contents 1. INTRODUCTION... 3 2. PREFACE... 4 2.1 Transmitter... 4 2.2 Optical fiber... 4 2.3 Receiver... 5 2.4 Advantage of Optical
More informationPhotolink- Fiber Optic Receiver PLR135/T1
Features High PD sensitivity optimized for red light Data : NRZ signal Low power consumption for extended battery life Built-in threshold control for improved noise Margin The product itself will remain
More informationHP 70950B OPTICAL SPECTRUM ANALYZER
HP 71450B, 71451B, and 71452B Optical Spectrum Analyzers Technical Specifications Spectral Measurements from 600 to 1700 nm HP 70950B OPTICAL SPECTRUM ANALYZER OPTICAL INPUT The HP 71450B, 71451B, and
More informationILV. Laser Welding: Line Scanners for Beam Shaping and Guiding. Alfred G. Arlt. Sulzbacher Str. 4 65824 Schwalbach/Taunus DIPL.-ING. ALFRED G.
Laser Welding: Line Scanners for Beam Shaping and Guiding Alfred G. Arlt Ingenieurbüro für Lasertechnik +Verschleißschutz (ILV) Sulzbacher Str. 4 65824 Schwalbach/Taunus aga@ilv-arlt.de lt History of ILV:
More information