CNC Video Measuring System inexiv VMA Series. CNC Video Measuring System. VMA Series. Reaching the peak of video measuring systems

Transcription

1 CNC Video Measuring System inexiv VMA Series CNC Video Measuring System VMA Series Reaching the peak of video measuring systems

2 Aiming for new heights, Nikon offers the ultimate in usability for a wide variety of measuring applications with the large FOV, long XYZ stroke inexiv VMA series. VMA Series Nikon CNC video measuring system inexiv VMA automatically measures various components, such as mechanical, plastic injection-molded and electronic parts, with high accuracy and repeatability. The wide actual field of view of maximum 13 mm (W) x 10 mm (H) at the lowest magnification enables easy confirmation of measurement points. In addition, the 3.5 mm-working-distance objective lens and extended mm Z-axis stroke allows measurements of tall and uneven objects with the very little possibility of collision between the objective lens and samples. Three models in the inexiv VMA series are available, each with a different XY-stroke. A touch probe version of each model is also available. Wide field of view and sharp, clear images A wide FOV of up to 13 mm x 10 mm (at 0.35x) allows easy search and alignment of measuring targets. The 10x zoom with five specific steps provides accurate measurement as well as highresolution images. An excellent Apochromat objective lens with high NA (0.11) and low distortion has been specially designed for the inexiv series, providing crisp, clear images. Optical magnification FOV size on stage 1/3" CCD size Horizontal x vertical (mm) Horizontal x vertical (mm) 13.3 x Video magnification 36 Total magnification on video window (640 x 40 pixels)* Pixel size (μm) Size of objects on video window (640 x 40 pixels) 0.01 (mm) 0.1 (mm) 1 (mm) * On a 24-inch WUXGA (19 x 1 pixels) monitor, recommended for the VMA series. Sample: Ø23.5 mm coin Standard stroke model Middle stroke model Large stroke model 2 (X) (Y) (Z) mm 4 (X) 400 (Y) (Z) mm 6 (X) 5 (Y) (Z) mm 13.3 mm (W) x 10.0 mm (H). mm (W) x 5. mm (H) 4. mm (W) x 3.5 mm (H) 2.6 mm (W) x 1.9 mm (H) 1.33 mm (W) x 1.0 mm (H) inexiv VMA-25V/ VMA-25 A space-saving, low-cost model that is suited to measurement of small parts inexiv VMA-4540V/ VMA-4540 For measurement of a wide range of objects, such as molded and pressed parts * The touch probe can only be attached to the VMA-25/4540/6555, and not to the VMA-25V/4540V/6555V inexiv VMA-6555V/ VMA-6555 For measurement of large samples and simultaneous measurement of multiple parts Robust 3.5 mm working distance A long 3.5 mm working distance minimizes the possibility of contact between the objective lens and valuable parts. It is ideal for measuring large step heights, tall bosses and deep holes. Working distance 3.5 mm Large XY stroke and long Z stroke Three models with different XY strokes are available to suit user requirements; 2 x mm, 4 x 400 mm and 6 x 5 mm. The three models enable measurements of various samples, ranging from small parts to large PCBs and panels, and also long parts and simultaneous measurements of multiple parts. An extended mm Z-axis stroke is perfect for tall workpieces. 2 3

3 Tools for realizing non-stop automatic measurement Fast and accurate vision AF (Auto Focus) The inexiv VMA series is equipped with highly repeatable vision AF that offers high-speed, high-precision focusing and height/depth measurement. Non-contact measurement using vision AF does not damage or deform parts, and does not necessitate fixing. Top surface of implant Touch probe for measurement of imperceptible parts from top and bevel angle (option) Mid-depth of implant Mid-depth of implant Bottom of implant Even the bottom of a small diameter hole can be brought into correct focus. Laser AF (option) Options for expanding measurement possibilities The VMA-25/4540/6555 is touch-probe ready and accommodates optional Renishaw TP or TP touch probes. Touch probes provide measurements of 3D shapes parts where vision AF cannot be used, such as the inner diameter of an oil seal or the clearance angle of an indexable insert. The touch probe offsets from the optical axis, but works coaxially in the same XYZ coordinate system as the optical axis using inexiv VMA TP AutoMeasure software. Inner diameter of oil seal * The VMA-25V/4540V/6555V is only for video measuring. Versatile illuminations The Laser AF with a long mm working distance is optionally available, enabling height measurement of flat surfaces with high repeatability, in keeping a wide FOV at a low magnification. The inexiv VMA series is equipped with episcopic (top), diascopic (bottom) and -segment ring (with 1-degree oblique angle) LED illuminators. Combining these illuminators with superior optics provides accurate detection of low contrast edges. Top light Ring light from left side Clearance angle of insert TP Extended 1.5x high-magnification (option) Ring light from rear side Ring light from right side Each model can be modified before shipment to extend magnification to 1.5x, powerful enough for precise measurement of minute electronic parts. * Video measuring images are slightly darker with the 1.5x high-magnification option, even with the same light intensity setting (0 - ). 0.52x 0.9x 1.5x 2.x 5.2x.9 mm (W) x 6. mm (H) 5.2 mm (W) x 3.9 mm (H) 3.1 mm (W) x 2.3 mm (H) 1.9 mm (W) x 1.3 mm (H) 0.9 mm (W) x 0.6 mm (H) mm working distance Any -segment light can be selected for effective edge detection. Sample: Ø23.5 mm coin Intelligent search Recorded image Even when a workpiece is misaligned, the system automatically searches the target location based on the target image recorded in a teaching file, enabling accurate, automatic measurement by eliminating possible detection errors. Dedicated software to meet measurement requirements User-friendly standard software inexiv VMA AutoMeasure 1 Target is detected 2 Searching the misaligned target 3 Target is detected Misaligned target can be automatically detected using intelligent search XY coordinate Digital chart comparator Deviation of contours can be checked by overlaying charts generated digitally from 2D CAD data onto video images. Digital charts always accompany video images. The VMA AutoMeasure software provides enhanced ease of use and versatility based on Nikon s years of extensive experience in developing the NEXIV series. XY coordinate after searching the target Main program layout Teaching file selection with interactive guides Optional software inexiv VMA Profiler/CAD Reader: 2D profile shape analysis program inexiv VMA Virtual AutoMeasure: CAD interface off-line teaching support program Gear evaluation software: Analysis of flat gears in terms of pitch deviations, tooth profile errors, tooth space run out, base tangent length, dimension over pin NEXIV EDF/Stitching Express: Image analysis and archiving program for creating an all-in-focus EDF (Extended Depth of Focus) image from multiple images at different Z axis. This also generates a stitched image with super wide FOV from multiple images on the same XY plane. 4 NEXIV EDF/Stitching Express 5

4 Three models with different XYZ strokes to suit various sample sizes Standard stroke model Measurement range with TP with 10 mm stylus PC rack (for all models) (without MCR) 400 ø (with MCR) X-Y direction ø x M6 Depth C T 0 Z direction (single column type) 2 (Measurement range) 4 2 (X) x (Y) x (Z) mm (Measurement range) inexiv VMA inexiv VMA-25V Measurement range with TP with 10 mm stylus (without MCR) Vision measurement range (X stroke) () (Y stroke) 6 (Stage glass) () 0 1-M Depth (X stroke) MADE IN JAPAN 390 (with MCR) Measurement range (Stage glass) Suitable for large samples (4 x 400 x mm or larger) and simultaneous measurement of multiple parts. High cost-performance with the same strong cast-iron body and direct bearing as the top-end model in the NEXIV VMZ-R series. Measurement range with TP with 10 mm stylus 10 Y direction (without MCR) X-Y direction (bridge type) (X) x 5 (Y) x (Z) mm 10 9 inexiv VMA x M Depth inexiv VMA-6555V (with MCR) 56 (Stage glass) Suitable for midsize samples (2 x x mm 4 x 400 x mm) and simultaneous measurement of multiple small parts. High cost-performance with the same strong cast-iron body and direct bearing as the top-end model in the NEXIV VMZ-R series. Large stroke model 4 10 Y direction 90.5 X-Y direction (bridge type) 16 4 (X) x 400 (Y) x (Z) mm (Y stroke) (Stage glass) Measurement range inexiv VMA inexiv VMA-4540V Middle stroke model () 0 5 High-performance, compact and affordable model that is suitable for small samples (within 2 x x mm) * The touch probe can only be attached to the VMA-25/4540/6555, and not to the VMA-25V/4540V/6555V 6

5 Specifications Main body inexiv VMA-25V/25 inexiv VMA-4540V/4540 inexiv VMA-6555V/6555 (X x Y x Z) 2 x x mm 4 x 400 x mm 6 x 5 x mm Measurement range with TP (Touch Probe)* 1 Measurement range with TP & MCR* 2 x x mm (TP) x x 10 mm (TP) 2 x x mm (with Vision AF) 15 x x mm (TP) 15 x x 10 mm (TP) 225 x x mm (with Vision AF) 400 x 400 x mm (TP) 400 x 400 x 10 mm (TP) 4 x 400 x mm (with Vision AF) 325 x 400 x mm (TP) 325 x 400 x 10 mm (TP) 35 x 400 x mm (with Vision AF) Minimum readout 0.1 µm Maximum workpiece weight 15 kg 40 kg kg Maximum workpiece weight (accuracy guaranteed) 5 kg kg kg Maximum permissible error* 3 EUX,MPE EUY,MPE EUXY,MPE EUZ,MPE (L = Length in mm) Camera Working distance Magnification FOV size on stage Auto focus Illumination Contour illumination Surface illumination Oblique illumination Video resolution Touch probe (optional) * 1 Power source Power consumption Dimensions & weight Main body with table (W x D x H) Controller Operational environment Temperature Humidity Accuracy guaranteed temperature Host computer CPU Memory OS Interface 2+L/0 µm 3+L/0 µm 3+L/ µm 2+6L/0 µm 3+6L/0 µm 3+L/ µm 1/3-in. progressive scan b/w camera (standard), 1/3-in. progressive scan color camera (optional) 3.5 mm ( mm with Laser AF) Optical: 0.35 to 3.5x (0.52x to 5.2x high magnification is available as an option) On screen: 12.6 to 126x with 24-inch WUXGA (19 x 1 pixels) monitor 13.3 x 10 mm to 1.33 x 1 mm (.9 x 6. mm to 0.9 x 0.6 mm with high-magnification option) Vision AF and optional Laser AF White LED diascopic illumination White LED episcopic illumination -segment white LED ring illumination 640 x 40 (pixels) Renishaw TP/TP V-240 V, / Hz 5A(V) - 2.5A(240V) 6 x 00 x 155 mm, 110 kg x 400 x 390 mm, 14 kg 10 C to 35 C 0% or less ±0.5K Intel CoreTM 2 Duo CPU or faster 4GB or more Windows 32bit USB2.0 / IEEE1394 *1 The touch probe can only be attached to the VMA-25/4540/6555, and not to the VMA-25V/4540V/6555V. *2 The inexiv-dedicated MCR can be used for both TP and TP. *3 Nikon's in-house test at C ±0.5k 0 x 10 x 1553 mm, 0 kg x 400 x 390 mm, 14 kg 0 x 5 x mm (TP) 0 x 5 x 10 mm (TP) 6 x 5 x mm (with Vision AF) 525 x 5 x mm (TP) 525 x 5 x 10 mm (TP) 55 x 5 x mm (with Vision AF) 1 x 1640 x 1553 mm, 665 kg x 400 x 390 mm, 14 kg Laser AF is a Class 1 Laser Product Class 1 Laser Product N.B. Export of the products* in this catalog is controlled under the Japanese Foreign Exchange and Foreign Trade Law. Appropriate export procedure shall be required in case of export from Japan. *Products: Hardware and its technical information (including software) Specifications and equipment are subject to change without any notice or obligation on the part of the manufacturer. July WARNING TO ENSURE CORRECT USAGE, READ THE CORRESPONDING MANUALS CAREFULLY BEFORE USING YOUR EQUIPMENT. Company names and product names appearing in this brochure are their registered trademarks or trademarks. 6-3, Shin-Yurakucho Nishiohi 1-chome, Bldg., 12-1, Shinagawa-ku, Yurakucho 1-chome, Tokyo Chiyoda-ku, 140-1, Tokyo Japan -331, Japan phone: fax: , Nishiohi 1-chome, Shinagawa-ku, Tokyo 140-1, Japan (Industrial) phone: fax: (Bio Science) phone: fax: NIKON METROLOGY, INC. 11 Grand River Avenue, Brighton, MI 4116 U.S.A. phone: fax: Sales.US.NM@nikon.com NIKON METROLOGY EUROPE NV Geldenaaksebaan 329, 01 Leuven, Belgium phone: fax: Sales.Europe.NM@nikon.com NIKON INSTRUMENTS (SHANGHAI) CO., LTD. CHINA phone: fax: (Beijing branch) phone: fax: (Guangzhou branch) phone: fax: , Nishiohi 1-chome, Shinagawa-ku, Tokyo 140-1, Japan phone: fax: NIKON SINGAPORE PTE LTD SINGAPORE phone: fax: NIKON MALAYSIA SDN BHD MALAYSIA phone: fax: NIKON INSTRUMENTS KOREA CO., LTD. KOREA phone: fax: NIKON INDIA PRIVATE LIMITED INDIA phone: fax: NIKON INSTRUMENTS S.p.A. ITALY phone: fax: NIKON METROLOGY UK LTD. UNITED KINGDOM phone: fax: Sales.UK.NM@nikon.com NIKON METROLOGY SARL FRANCE phone: fax: Sales.France.NM@nikon.com NIKON METROLOGY GMBH GERMANY phone: fax: Sales.Germany.NM@nikon.com 6-3, Nishiohi 1-chome, Shinagawa-ku, Tokyo 140-1, Japan (Industrial) phone: fax: (Bio Science) phone: fax: En Printed in Japan (140-04)T Code No. 2CE-IJBH-1 This brochure is printed on recycled paper made from 40% used material.