C 091 D. Main Features
|
|
|
- Godfrey Ward
- 7 years ago
- Views:
Transcription
1 Main Features Precision metal construction. Ingress Protection class IP 6. Threaded coupling acc. to IEC Number of contacts are 3 to 8, and. Internal metal strain relief. Complete EMI shielding in the fully mated and locked position (EMI security). Male and female cable connectors: solder in 3 to 8,, positions; crimp in 3 to 8 positions; cable outlet in PG for diameter of 6 mm; cable outlet in PG 9 for diameter of 8 mm ; straight cable entry; metal coupling nickel plated Male and female receptacles for panel mount: front or rear mounting, solder in 3 to 8,, positions; crimp in 3 to 8 positions; PCB mounting, vertical, using dip solder termination with multiple tail lengths. The connectors are registered under File # E UL. UNDERWRITERS LABORATORIES INC. Amphenol 3
2 38 Amphenol
3 Characteristics General Characteristics Standard Characteristics Number of contacts Stereo 6 8 View on termination side of contact insert Contact arrangement acc. to DIN Contact arrangement acc. to IEC Electrical Characteristics Rated voltage Rated impulse withstand voltage Pollution degree Installation category Insulation group Test voltage Current rating Insulation resistance Contact resistance Climatical Characteristics Climatic category Temperature range Mechanical Characteristics IP-degree Insertion and withdrawal forces Mechanical operation N 90.oz 30 N 110.oz - 40 C C / - 40 F F * Remark for gold plated contacts To avoid brittle intermetallic connections gold-plated soldering terminals must be pre-tinned before soldering. Amphenol / 85 / IEC V ~ V ~ 300 V ~ 150 V ~ IEC V 00 V 1500 V 00 V IEC IEC IEC I 3 IEC V ~ 60 V ~ 980 V ~ 60 V ~ IEC Test 5 b 5 A / + 40 C / F 3 A / + 40 C / F IEC Test 3 a > 10 IEC < 5 m Test 2 a IEC IEC IEC IEC 605- Test 13 b IEC Test 9 a IP 6, cable diameter PG : , PG 9: N 5.oz 50 N 180.oz 55 N 200.oz Silver 500 mating cycles Gold 0 mating cycles Materials Housing material die cast, nickel plated Dielectric material thermoplastic Sealing material neoprene plated / gold plated * Further Characteristics Termination technique solder, crimp Wire gauge solder 0,5 mm 2 (20-26 AWG), crimp 0, 1,0 mm 2 (26-18 AWG) Flammability UL 94 V0 Locking system IEC metal screw coupling Characteristics Do not connect or disconnect under load. Metal housing parts shall be securely incorporated to protected ground. 60 N 220.oz 50 N 180.oz solder 0,25 mm/24 AWG
4 Male cable connector Male cable connector. Max. cable outlet 6 mm, contact plating: or gold. Male cable connector. Max. cable outlet 8 mm, contact plating: or gold. PG PG 9 1) Please order crimp contacts separately, see page 46 2) see remark page 39 solder termination C091 31H003 2 C091 31H004 2 C091 31H005 2 C091 31H105 2 C091 31H006 2 C091 31H00 2 C091 31H10 2 C091 31H008 2 C091 31H0 2 C091 31H0 2 C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H Assembling instruction Drehmoment Torque 0,5 0, Nm / oz PG Torque 0,5 Drehmoment - 1Nm/ 1.8 0,5-3.6.oz - 1Nm PG 9 2,5 20 2, Amphenol
5 Female cable connector Female cable connector. Max. cable outlet 6 mm, contact plating: or gold. Female cable connector. Max. cable outlet 8 mm, contact plating: or gold. PG PG 9 1) Please order crimp contacts separately, see page 46 2) see remark page 39 solder termination C091 31D003 2 C091 31D004 2 C091 31D005 2 C091 31D105 2 C091 31D006 2 C091 31D00 2 C091 31D10 2 C091 31D008 2 C091 31D0 2 C091 31D0 2 C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D Assembling instruction Drehmoment Torque 0,5 0, Nm / oz PG Torque Drehmoment 0,5-1Nm / 0, oz 1Nm PG 9 2,5 20 2, Amphenol 41
6 Female receptacle for front mounting Assembling instruction Panel Cutout contact plating: or gold, termination: straight dip solder, contact plating: or gold, pin length 15 mm ( + contacts: 18 mm) from flange, solder termination C091 31N003 2 C091 31N004 2 C091 31N005 2 C091 31N105 2 C091 31N006 2 C091 31N00 2 C091 31N10 2 4) C091 31N008 2 C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 31N ) C091 31N ) C091 61N C091 61N C091 11N C091 11N C091 11N C091 11N C091 11N C091 11N C091 11N C091 11N termination: straight dip solder, contact plating:, termination: straight dip solder, contact plating:, C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N ) Please order crimp contacts separately, see page 46 2) see remark page 39 4) Available upon request. Min. order qty. pcs/type. 42 Amphenol
7 Female receptacle for rear mounting Assembling instruction Panel Cutout contact plating: or gold, termination: straight dip solder, contact plating: or gold, pin length 10.5 mm ( + contacts:13.5 mm) from flange, solder termination C091 31G003 2 C091 31G004 2 C091 31G005 2 C091 31G105 2 C091 31G006 2 C091 31G00 2 C091 31G10 2 C091 31G008 2 C091 31G0 2 C091 31G0 2 C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 31G C091 31G C091 61G C091 61G C091 11G ) C091 11G C091 11G ) C091 11G C091 11G ) C091 11G ) C091 11G C091 11G termination: straight dip solder, contact plating:, termination: straight dip solder, contact plating:, C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G ) Please order crimp contacts separately, see page 46 2) see remark page 39 4) Available upon request. Min. order qty. pcs/type. Amphenol 43
8 Female receptacle for flange mounting Panel Cutout square flange, termination: solder, contact plating: or gold, with sealing gasket. solder termination C091 31T003 2 C091 31T004 2 C091 31T005 2 C091 31T105 2 C091 31T006 2 C091 31T00 2 C091 31T10 2 4) C091 31T008 2 C091 31T C091 31T C 091 D Male receptacle for front mounting Assembling instruction Panel Cutout Male receptacle, contact plating: or gold, sealing with O-Ring. solder termination C091 31W003 2 C091 31W004 2 C091 31W005 2 C091 31W105 2 C091 31W006 2 C091 31W00 2 C091 31W10 2 C091 31W008 2 C091 31W C091 31W ) Please order crimp contacts separately, see page 46 2) see remark page 39 4) Available upon request. Min. order qty. pcs/type. C091 11W C091 11W C091 11W C091 11W C091 11W C091 11W C091 11W C091 11W Amphenol
9 Male receptacle for rear mounting Assembling instruction Panel Cutout Male receptacle, contact plating: or gold, sealing with O-Ring. solder termination C091 31C003 2 C091 31C004 2 C091 31C005 2 C091 31C105 2 C091 31C006 2 C091 31C00 2 C091 31C10 2 C091 31C008 2 C091 31C C091 31C C091 11C ) C091 11C ) C091 11C ) C091 11C ) C091 11C ) C091 11C C091 11C ) C091 11C C 091 D Male receptacle for flange mounting Panel Cutout Male receptacle, square flange, termination: solder, contact plating: or gold, with sealing gasket. solder termination C091 31S003 2 C091 31S004 2 C091 31S005 2 C091 31S105 2 C091 31S006 2 C091 31S00 2 C091 31S10 2 C091 31S008 2 C091 31S C091 31S ) Please order crimp contacts separately, see page 46 2) see remark page 39 4) Available upon request. Min. order qty. pcs/type. Amphenol 45
10 C 091 Crimp contacts Pin contact Socket contact Typ of Contact Contact Ø Wire Gauge max. Insul. Ø Supplied as Pcs. gold Pin contact 1.5 mm mm 2 AWG mm single contact VN (1) VN (2) contacts on reel 200 ZN (1) ZN (2) 2000 HN (1) HN (2) mm 2 AWG mm single contact VN (1) VN (2) contacts on reel 200 ZN (1) ZN (2) 2000 HN (1) HN (2) Socket contact 1.5 mm mm 2 AWG mm single contact VN (1) VN (2) contacts on reel 200 ZN (1) ZN (2) 2000 HN (1) HN (2) mm 2 AWG mm single contact VN (1) VN (2) contacts on reel 200 ZN (1) ZN (2) 2000 HN (1) HN (2) For more information upon crimping tools please contact factory or order our catalogue. Minimum retention forces according to IEC Wires Wires Wire size Minimum retention force Crimp hight (average values) Wire size Minimum retention force Crimp hight (average values) h max mm 2 N mm mm 2 AWG N h max mm AWG AWG These min. values are based on the copper wire tensile strength with B 230 N/mm Amphenol
11 C 091 Accessories Description for Series Drawing Spanner wrench for receptacles with ring nut. C 091 A C 091 B C 091 D N Spanner wrench for male and female cable connectors. C 091 A C 091 B C 091 D FH Protective cover for male cable connectors and male receptacles. C 091 A C 091 D for male cable concectors C U000 2 L = L flat sealing for male receptacles C U L = 80 Protective cover for female cable connectors and female receptacles. C 091 A C 091 D for female cable connectors C V000 2 L = L for female receptacles C V L = 80 Safety washer for male and female receptacles. Packaging unit: 25 pieces C 091 A C 091 B VN (1) Colored back-shells C 091 A C 091 B Colour blue red yellow green Pieces T X T C T X T C T X T C T X T C Amphenol 4
12 C 091 Summary of s Page Page Page Page Page Page C U C U C V C V C091 11C C091 11C C091 11C C091 11C C091 11C C091 11C C091 11C C091 11C C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11D C091 11G C091 11G C091 11G C091 11G C091 11G C091 11G C091 11G C091 11G C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11H C091 11N C091 11N C091 11N C091 11N C091 11N C091 11N C091 11N C091 11N C091 11W C091 11W C091 11W C091 11W C091 11W C091 11W C091 11W C091 11W C091 31C C091 31C C091 31C C091 31C C091 31C C091 31C C091 31C C091 31C C091 31C C091 31C C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31D C091 31G C091 31G C091 31G C091 31G C091 31G C091 31G C091 31G C091 31G C091 31G C091 31G C091 31G C091 31G C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31H C091 31N C091 31N C091 31N C091 31N C091 31N C091 31N C091 31N C091 31N C091 31N C091 31N C091 31S C091 31S C091 31S C091 31S C091 31S C091 31S C091 31S C091 31S C091 31S C091 31S C091 31T C091 31T C091 31T C091 31T C091 31T C091 31T C091 31T C091 31T C091 31T C091 31T C091 31W C091 31W C091 31W C091 31W C091 31W C091 31W C091 31W C091 31W C091 31W C091 31W C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61G C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N C091 61N FH HN (1) 46 HN (2) 46 HN (1) 46 HN (2) 46 HN (1) 46 HN (2) 46 HN (1) 46 HN (2) 46 N T C 4 T X 4 T C 4 T X 4 T C 4 T X 4 T C 4 T X 4 T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T Amphenol
13 C 091 Summary of s Page Page Page Page Page Page T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T Amphenol 49
14 C 091 Summary of s Page Page Page Page Page Page T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T T VN (1) 4 VN (1) 46 VN (2) 46 VN (1) 46 VN (2) 46 VN (1) 46 VN (2) 46 VN (1) 46 VN (2) 46 ZN (1) 46 ZN (2) 46 ZN (1) 46 ZN (2) 46 ZN (1) 46 ZN (2) 46 ZN (1) 46 ZN (2) Amphenol
15 Representatives: Europe Amphenol Benelux BV Peppelkade 2 a NL-3992 AK Houten Phone +31 / 30 / Fax +31 / 30 / info@amphenol-nl.com Amphenol Ges. m. b. H. Johnstraße 42, Top 3A A-1150 Wien Phone +43 / 1 / Fax +43 / 1 / Telex amphw a info@amphenol-at.com Amphenol Ibérica Calle Cuba No. 6, 2-5 E Coslada Madrid, Spain Phone +34 / 91 / 63 / Fax +34 / 91 / 64 / info@amphenol-nl.com Amphenol Italia S.p.A. Galleria Gandhi, 2/2 I-2001 Mazzo di Rho (Milano) Phone +39 / 2 / Fax +39 / 2 / info@amphenol-it.com Amphenol Limited Thanet Way, Whitstable GB-Kent CT5 3JF Phone +44 / 2 / Fax +44 / 2 / 1 3 Telex Amphenol Poland 18 Niedurnego St Swietochlowice (Katowice), Poland. Phone +48 / 32 / Fax +48 / 32 / Mobile +48 / 601 / info@amphenol-at.com Amphenol Scandinavia Johanneslundsvägen 2 S Upplands Väsby Phone +46 / 8 / Fax +46 / 8 / info@amphenol-se.com Amphenol Socapex France 11 Avenue Durbonnet BP 5 F-9240 Courbevoie Cedex Phone +33 / 1 / Fax +33 / 1 / Telex MSTH F Amphenol Switzerland Route du Roule 41 CH-123 Marly Phone +41 / 26 / Fax +41 / 26 / info@amphenol-nl.com Representatives: North America Amphenol Corporation Corporate Headquarters 358 Hall Avenue Wallingford, CT Phone +1 / 2 03 / 2 65 / Fax +1 / 2 03 / 2 65 / Amphenol-Tuchel Electronics Representative Office 6900 Haggerty Road Suite 200 Canton, Michigan 4818 Phone +1 / 34 / Fax +1 / 34 / Representatives: Asia Representatives: Australia & New Zealand Amphenol East Asia Limited Units 3-19, 10/F & 11/F Wah Luen Industrial Centre Wong Chuk Yeung Street Fotan, Shatin, N T, Hong Kong Phone / / Fax / / 09 4 Telex AMPEA HX Amphetronix Limited Plot No. 105 Bhosari Industrial Area Pune India Phone +91 / 2 / Fax +91 / 2 / Telex Amphenol Japan, K.K , Kudan Minami Chiyoda-Ku Tokyo 102 Japan Phone +81 / 3 / / Fax +81 / 3 / 52 6 / 0 59 Amphenol Kai Jack No. 110, Sec 1 Bao-An Road Ren-Der Shiang Tainan, Taiwan Phone +886 / 6 / 266 / 1011 Fax +886 / 6 / 266 / 4633 Amphenol Australia Ltd. 248 Wickham Road, Moorabbin Victoria 3189, Melbourne Australia Phone +61 / 3 / 9555 / 1566 Fax +61 / 3 / 9553 / 3801 Your engineering sales representative: ATE 201 B Amphenol-Tuchel Electronics GmbH August-Haeusser- Str. 10. D-4080 Heilbronn. Phone +49 /(0)131/ Telefax +49 /(0)131/ Printed on chlorin-free bleached paper. Specifications may be changed without notice. Copyright 02/00 by Amphenol-Tuchel Electronics GmbH, Germany
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH C 091 A Main Features Metal threaded coupling acc. to IEC. Number of contacts are 2 to 8, 12 and 14. Internal metal strain relief
400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors Series C 16-1/ C 16-3
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors Series C 6-/ C 6-3 The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
Standard Buccaneer - Ethernet
IP6 rated compliant PUR jacket on cable Shielded system shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB mounted panel connector IDC termination panel connector Earth lead version
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
7000 Series Buccaneer
The all plastic and metal construction of the - circular that combine the ease of use of a quick coupling mechanism with proven environmental sealing for signal and mains power. Designed and independently
TINY xlr... 4. Plugs... 6. Jacks... 8. Phono "RCA" & DIN Connectors... 10. Patch Box & Stage Box... 12. Dual Banana Plug... 14. Technical Data...
Product Guide 2010 C o n t e n t P a g e TINY xlr... 4 Plugs... 6 Jacks... 8 Phono "RCA" & DIN Connectors... 10 Patch Box & Stage Box... 12 Dual Banana Plug... 14 Technical Data... 15 2 R E A N With the
HARTING Ethernet Cabling 8-poles Overview
Ethernet Cabling 8-poles Overview RJ45 Connectors [on page 8] System cables [on page 12] Distribution modules and Outlets [on page 17] Connectors [on page 20] System cables [on page 26] Panel feed-throughs
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
Jack to Jack adapters Plug to Plug U-Link connectors PCB Right angle plastic PCB Right angle - metal. Ordering Codes
BNC 75Ω RF CONNECTORS BNC 75Ω RF CONNECTORS To meet the need for higher performance, impedance matched cable interconnections, Amphenol offers a full line of 75 ohm BNC connectors. These connectors can
Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.
Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11
Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
Amphenol Amphenol-Tuchel Electronics GmbH
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors easier and quicker to assemble mate by Amphenol The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation.
ODU MEDI-SNAP. Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal. www.odu.de
Miniature Circular Connectors with Push-Pull Locking Made of Plastic or Metal Miniature Circular Connectors with Push-Pull Locking for Medical Applications Applications Medical Test and measure equipment
ODU MINI-SNAP. Miniature Cylindrical Connectors with Push-Pull-Locking Series F
Catalogue Nr.: 5--a-e ODU MINI-SNAP Miniature Cylindrical Connectors with Push-Pull-Locking Series F ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße, D-85 Mühldorf/Inn Telefon: +9/86 /6 56-, Telefax:
EPIC CIRCON M23 Series Circular Signal Connectors
Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel
Standard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
SMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
IEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
Directory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding
circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),
DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures
DEUTSCH DL AND DBA SERIES CONNECTORS QUALIFIED TO MIL-DTL-83723 SERIES III Weight-saving aluminum connectors designed for rugged use and high temperatures DEUTSCH DL AND DBA SERIES CONNECTORS Weight-saving
The Wild Children of D38999
micro38999 Series High Vibration Miniature Connectors The Wild Children of D38999 A complete range of space saving compact connectors with all of the features and capabilities of D38999 for harsh applications.
VEAM PowerLock Box. Interconnect Solutions
VEAM PowerLock Box Interconnect Solutions Features & Benefits Following the highly successful ITT Veam NRG Box, the new PowerLock Box offers an economical option with many of the same functions contained
Assembly Instruction CAI- Connector with universal Endbell
CANNON STANDARD Seite 1 von 17 CAI- Connector with universal Endbell Shell size 10 to 36 with APK contact / Trident T2P - contact Illustration and assembly exemplary of CAI Layout 20-0306 with APK / Trident
.093 [2.36] Commercial Pin and Socket Connectors
![.093 [2.36] Commercial Pin and Socket Connectors](/thumbs/40/21560042.jpg ".093 [2.36] Commercial Pin and Socket Connectors")
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
SMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
UTS discrete wire sealing
Technical characteristics Mechanical Durability: 250 matings & unmatings Vibration resistance: Sinusoidal vibrations per CEI 605-4 - from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105
SOURIAU s discrete wire sealing
SOURIAU s discrete wire sealing Description Using proven grommet technology from SOURIAU s extensive knowledge of harsh environments, the UTO & UTS connectors with grommet garantie a discrete wire sealing
AmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
PAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
SMZ type 43 INTRODUCTION. The Radiall Type 43 coaxial connector range. Type 43 series - Features and benefits
INTRODUCTION The Radiall Type 43 coaxial connector range The Radiall range of Type 43 series connectors is fully approved (where applicable) to BT (British Telecom) standards as well as to British Standard
AMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
CONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
369 SERIES CONNECTORS
DEUTSCH 369 SERIES CONNECTORS High-Reliability, Lightweight, Compact Connectors Suited To Harsh Aerospace Environments DEUTSCH 369 SERIES CONNECTORS DEUTSCH Lightweight, 369 Series Compact Connectors Connectors
14 PHOENIX CONTACT Courtesy of Power/mation. 1310 Energy Lane, Saint Paul, MN 55108. info@powermation.com - 800-843-9859 - www.powermation.
14 PHOENIX CONTACT PLUSCON circular is a circular connector for use in industrial automation. The range of design sizes available is varied, starting with the design sizes M5 to M8 and M1, for sensor/actuator
How To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
Trapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
NYS216. Technical Information. Product. Electrical. Mechanical. Material. Environmental. Product specific
NYS216 3 pole horizontal 1/4'' jack, all contacts switched, plastic housing with nut and washer Technical Information hide Product Title NYS216 Electrical Dielectric strength Insulation resistance Rated
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
AMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
Industrial circular connectors
Industrial circular connectors M 16 M 58 010 CONINVERS - M16 to M58 circular connectors for industrial applications CONINVERS GmbH, an independent company, is the specialist for M16 to M58 circular connectors
Quick Connect Boxes Inside Gloveboxes
ULC Series Junction Boxes Quick Connect Boxes Inside Gloveboxes The ULC quick connect junction boxes are the essential elements to optimize the cabling inside gloveboxes. Large range Designed for nuclear
SMA Series Subminiature RF Connectors
SMA Series Subminiature RF Connectors Screw-on mating Frequency range DC-18 GHz High performance Rugged construction ONLINE CATALOG 104 John W. Murphy Drive P.O. Box 510 New Haven, CT 06513 www.aepconnectors.com
SMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
HARTING Ethernet Cabling 4-poles Overview
Ethernet Cabling 4-poles Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] Connectors [on page 22] System cables [on page 24] Panel feed-throughs
Glenair Military and Industrial Power and Signal Connectors
Glenair Military and Industrial Power and Signal Connectors Series ITS (And FRITS) 5015 Type Reverse Bayonet Connectors Derived from MIL-DTL-5015 and VG95234 Mating mechanism (3 reverse bayonets at 120
01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS
. HARTING RJ INDUSTRIAL ETHERNET CONNECTORS Ethernet is is coming up to standard industrial interface. Therefore, automation devices such as controllers, sensors and actuators feature possess on one or
6000 Series Buccaneer
Robust, instant connections for harsh environments 6000 Series Buccaneer - circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available
Waterproof Connectors for Outdoor Use
Waterproof Connectors for Outdoor Use HR41A Series Mated condition diagram Nut-tightening rear mount type (panel thickness=mm) 70.5 Features 1. Waterproof connector designed for outdoor use Light-weight
ANOISON HPQN SERIES HPQN CONNECTORS INTERFACE DIMENSIONS. Description. Interface Dimensions 21 Characteristics
SERIES HPQN CONNECTORS DESCRIPTION CONTENT Designed by James Qu at Anoison in 2006, the HPQN is a quick locking version of the widely used type N connector. By replacing the threaded interface of the original
Figure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
CIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
Technical. Specifications. fischer Rugged Flash Drive. New. Rugged Solution for Safe Data Storage in Harsh Environment
fischer Rugged Flash Drive New Rugged Solution for Safe Data Storage in Harsh Environment Headquarters Fischer Connectors SA Ch. du Glapin 20 1162 Saint-Prex Switzerland Phone +41 21 800 95 95 mail@fischerconnectors.ch
Givare NC-SRS 280 och 880
Givare NC-SRS 280 och 880 Aratron AB/Nordic Control, 02 03 SRS280SEALED ROTARY SENSOR PERFORMANCE ±2 Resistance ±20% Hysteresis (repeatability) Accuracy Applied voltage maximum Resolution Output smoothness
* Please visit the product pages on our website for the most up-to-date product information. Con-X Molded Cable Assembly Checklist...
TABLE OF CONTENTS Custom Molded Cable Assemblies and Connectors..........................2 Capabilities.....................................................................3 Standard Connector Products.......................................................4
FASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
Universal MATE-N-LOK Connector System
Universal MATE-N-LOK Connector System 2011 Tyco Electronics Corporation. All Rights Reserved. MATE-N-LOK, TE Connectivity, TE Connectivity (logo) and TE (logo) are trademarks. Other logos, products and/or
CCM05 SD, MMC & minisd
For one of the most common card formats, we offer various reading options in a small and sturdy packaging. This includes the smaller standard of the minisd, designed for the mobile communication needs.
Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...
Magnetic and Hydraulic-Magnetic Circuit Breaker 840-G2... Description Single, two and three pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast
SlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
STANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
HARAX circular connector
Show navigation HARAX circular connector Technical characteristics Specifications IEC 60 352-4 IEC 60 9475-2 Approvals HARAX M8-S/M12-S Rated voltage Rated current Diameter of individual strands Conductor
.062 [1.57] Commercial Pin and Socket Connectors
![.062 [1.57] Commercial Pin and Socket Connectors](/thumbs/40/21560048.jpg ".062 [1.57] Commercial Pin and Socket Connectors")
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
HARTING Ethernet Cabling 4-poles Overview
Overview RJ45 Connectors [on page 8] System cables [on page 10] Distribution modules and Outlets [on page 20] HARTING PushPull Connectors [on page 22] System cables [on page 24] Panel feed-throughs [on
Anderson Power Products
Anderson Power Products Anderson Power Products APP s philosophy is to provide products and services within the trading markets of our customers. We currently serve our world-wide customer base from customer
picomax The Pluggable Connection System
picomax The Pluggable Connection System TECHNOLOGY THIS SPECIALIZED CAN T MEET ALL REQUIREMENTS. YES IT CAN. CONTENTS picomax Pin spacing: 3. mm/0.138 in;.0 mm/0.197 in; 7. mm/0.29 in Versatile Pluggable
VG96929 Reverse Bayonet Single-Pole Connectors
Reverse Bayonet Single-Pole High-Current, Low-Voltage Power for Ruggedized Military and Industrial Applications United States United Kingdom Germany France Nordic Italy Spain Japan High Voltage Electrical
PowerLine. Single Pole Connectors
PowerLine Single Pole Connectors Ten 47 Limited Unit 2B Frances Industrial Park Kirkcaldy, Scotland, UK KY1 2XZ Tel: +44 (0)1592 655725 Fax: +44 (0)1592 651049 Email: sales@ten47.com INTRODUCTION BACKGROUND
0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N
55 Series - General purpose relays 7-10 A Features 55.12 55.13 55.14 Printed circuit mount, general purpose 2, 3 & 4 Pole relays 55.12-2 Pole 10 A 55.13-3 Pole 10 A 55.14-4 Pole 7 A AC coils & DC coils
MDM. High performance Microminiature connectors, ESA qualified, for space applications.
Microminiature Connectors High performance Microminiature connectors, ESA qualified, for space applications. Suitable for Board-to Board, Board-to Cable or Cable-to Cable applications. Space/High reliability
Powermate Range Pitch 7.62
owermate Range itch 7.62 in headers Socket connectors CB connection Solder connection SV 7.62/90 500 V / 43 A SV 7.62/180 500 V / 41 A.2.4 Cable connection Clamping yoke connection Tension clamp connection
Cable Plug acc. to DIN EN 175301-803, Form A
Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with
This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
Series Connectors for PCB
HE 8 / 127 Series Connectors for PCB MAIN CHARACTERISTICS Main features The 127 series circuit board connectors are available in 3 different versions: HE 801 / 127: E 301/B From 17 to 144 signal contacts,
Agilent T-1 3 / 4 (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
Agilent T-1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-36, HLMP-361
ZS6-S Screw Clamp Terminal Blocks Disconnect with blade
Technical Datasheet SNK646D00 Catalogue Page SNK646S00 ZS6-S Screw Clamp Terminal Blocks Disconnect with blade - Ease your disconnect operations with the disconnect blade operated by hand or with a screwdriver,
Signaling Lights. LH Series Surface Mount Indicators. Part Numbers. Jumbo Dome (one color) Jumbo Dome (two color)
Innovative indicators in a slim & stylish design. uces installation space. LH Series Surface Mount Indicators Key features of the LH series include: Direct mounting on surfaces such as panels, aluminum
gesis IP + Heavy Duty Class I, Zone 2
gesis IP + Heavy Duty gesis IP+ 20i HD Z2 Heavy-Duty Connectors for Class 1, Zone 2 Hazardous Locations Catalog 2012 Catch the Next Wave in Modular Connections Plug & Go Heavy-Duty Connectors for areas
Fakra. Coaxial connectors. DC 6 GHz
C-Blue D-Bordeaux GPS application GSM/Mobil Phone The FAKRA (Automobile Expert Group) has therefore defined a standardised connector system for the various communication applications in cars. Our FAKRA-compliant
19-PIN. PLS 19-pin connector series. Features: SOLDER TYPE CRIMP TYPE PLS-5219LM PLS-5219CLM PLS-5219CLF PLS-5219LF PLS-5219SM PLS-5219CSM
PLS -pin connector series SOLDER TYPE CRIMP TYPE PLS-LM PLS-CLM PLS-LF PLS-CLF PLS-SM PLS-CSM strain relief PLS-SF PLS-CSF Features: - Rugged die-casted aluminum alloy shells, with black non-conduc ve
M8 / M12 CONNECTOR SYSTEM
M8 / M12 CONNECTOR SYSTEM EVERY CONNECTION COUNTS TE CONNECTIVITY S M8 / M12 Connector System for machine industrial automation and control applications provides a solution that safely and reliably ensures
XG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
The STRIKE Connector System
I N D U S T R I A L The STRIKE Connector System The STRIKE Connector System The STRIKE Connector System is designed for heavy duty equipment. It combines technical know how of DEUTSCH in connectors with
MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors
MP Economy Power (EP) Connectors Table of Contents 2 Introduction This catalog has been designed to assist you, our customer, identify products to satisfy your connector needs for printed circuit board
A Division Of AVX Corporation. DIN Connectors
A Division Of AVX Corporation DIN Connectors Index by DIN Style Introduction & Applications 4 Press-Fit 7 Design Aids 8 Approvals 8 Technical Specifications 11 Plating 12 Military Cross Reference 12 STYLE
ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket
Technical Datasheet SNK636D00 Catalogue Page SNK636S00 ZS-SF-T Screw Clamp Terminal Blocks For x 0 and x fuses - with test socket - Protect your circuit with x and x0 fuse terminal blocks (fuse not supplied
QM (1.78mm-.070") CONNECTORS-"MICRO 70"
QM (1.78mm-.070") CONNECTORS-"MICRO 70" General Designed to fill the needs of high density and miniature interconnection, the QM series are Super-Small IDC Connection. This IDC plug uses I/O Cable
ODU MINI-SNAP PC. Miniature Cylindrical Connectors with Push-Pull-Locking in Plastic
Catalogue No. 1005 PC-d-e ODU MINI-SNAP PC Miniature Cylindrical Connectors with Push-Pull-Locking in Plastic ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone:
RJF TV Ethernet connection system for harsh environment
RJF TV Ethernet connection system for harsh environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
2010-2011. Shortform Catalogue. Solutions for appliance & electronic applications. rocker switches. lever. switches. push. switches.
2010-2011 Solutions for appliance & electronic applications Shortform Catalogue rocker lever push vandal resistant slide door snap-action & safety rotary IEC sockets fuseholders indicators A trading name
FOR BOARD-TO-CABLE CONNECTION
FOR OARD-TO-ALE ONNETION 230 SERIES (FOR FLAT ALE ONNETION) FEATURES Two 1.27 mm (0.050 in.) pitch flat cables can be used. 1.27 mm (0.05 in.) pitch contact arrangement in two rows and terminal arrangement