Industrial Modem Line. Worldwide remote access to machines and systems

Transcription

1 Industrial Modem Line Worldwide remote access to machines and systems

2 Industrial Modem Line The complete range The Industrial Modem Line can be used to connect to machines and systems worldwide for efficient remote maintenance, continuous data acquisition, and automatic alarm generation. Universal data links worldwide and control-independent Secure communication integrated security functions offer manipulation and expertise protection Efficient remote access solutions reliable and high-performance use in harsh industrial environments The Industrial Modem Line provides optimum remote access for every application. What is 3G? 3G refers to the third generation of mobile phone standards. UMTS (Universal Mobile Telecommunications System) is a widely used and important standard of this new generation. Due to the significantly higher transmission speed, this new 3G is particularly suitable for applications with high volumes of data. 2 Analog dial-up connections Access remote control systems and network devices directly using the telephone network, which is available worldwide.

3 Industrial s for all interfaces For I/O signals For serial interfaces For Ethernet networks DSL high-speed permanent lines Use existing copper cables for transmission speeds of up to 30 Mbps. 3G mobile phone connection Communicate wirelessly at high speed with up to 7.2 Mbps. GSM Internet communication Transmit your data via a VPN connection using the mobile phone network. 3

4 Remote maintenance Remote maintenance via dial-up connection Worldwide, direct access to control systems and Ethernet networks enables maintenance and service work to be carried out quickly and efficiently. Analog telephone network (PSTN) Analog USB FL MGUARD security router GPRS VPN tunnel Internet GSM/3G mobile phone network (GPRS/EDGE/3G) SHDSL connection 20 km SHDSL Ethernet SHDSL Ethernet 4

5 Remote control Alarm generation Remote control via a permanent line The secure and continuous transmission of process data to the control center means that even remote external stations and substations can be monitored and controlled. Automatic alarm generation Proactive and precise early warning messages via SMS or enable fast troubleshooting and thus minimize production downtimes. Analog telephone network Universal data links via the public telephone network Analog Ethernet Serial data up to 33.6 kbps Direct access to control systems and login into remote Ethernet networks Analog V.24 (RS-232) GPRS / EDGE/3G 3G /router IPC TCP / IP data up to 7.2 Mbps Ethernet switch k GPRS Universal, packet-oriented data link via the GSM mobile phone network Encrypted VPN connection via the Internet High-speed DSL connection Permanent data links using copper cables up to 20 km in length 20 km SHDSL Ethernet Data rates of up to 30 Mbps depending on the cables Transparent connections for Ethernet, PROFIBUS, and serial applications 5

6 Serial ethernet i/o Machine/system interfaces Secure remote access Ethernet Serial I/O Access protection Internet security Access to remote industrial networks Serial interfaces Inputs Outputs Password protection Selective call acceptance Call-back function Security functions X Industrial Ethernet CHAP protocol Analog X X X V.24 (RS-232) 1 1 X V.24 (RS-232) X USB GSM/GPRS/3G X X X Industrial Ethernet 6 4 Firewall, IPsec or OpenVPN encryption X X X Industrial Ethernet 6 4 Firewall, IPsec or OpenVPN encryption X X X V.24 (RS-232) 2 1 Firewall function X 6 4 X 6 4 X X Industrial Ethernet 2 DSL X X PROFIBUS 2 X X V.24 (RS-232), RS-422, RS Accessories Programming adapter for coupling to S7-300/400 controllers PSI-MPI / RS232-PC Modem antennas for GSM and UMTS networks PSI-GSM / UMTS-QB-ANT Remote control software for extending Phoenix Contact controllers RESY-DATA-A LIC Security router with firewall and VPN support FL MGUARD RS VPN (Additional accessories can be found on pages 10 and 11) 6

7 The complete range Designation Order No. Short description The Industrial Modem Line is optimized for harsh industrial environments and thus provides reliable and secure data links worldwide and control-independent. PSI-MODEM-ETH PSI-DATA/FAX-MODEM / RS PSI-DATA/BASIC-MODEM / RS PSI-MODEM-BASIC/USB Analog Ethernet for dial-up operation, V DC supply voltage Analog with V.24 (RS-232) interface for dial-up and permanent line operation, V DC/16-40 V AC supply voltage Analog with V.24 (RS-232) interface for dial-up operation (up to 56 kbps), V DC supply voltage Analog with USB interface for dial-up operation (up to 56 kbps), supply voltage via USB connection PSI-MODEM-3G/ROUTER PSI-MODEM-GSM/ETH PSI-GPRS/GSM-MODEM/RS232-QB PSI-MODEM-SMS-REL/6 DI/4DO/AC PSI-MODEM-SMS-REL/6ADI/4DO/DC G router with tri band UMTS (HSPA) and quad band GPRS/EDGE with security and VPN functions, V DC supply voltage Quad band for GPRS/EDGE and GSM with security and router functions, V DC supply voltage Quad band for GPRS and GSM, V DC supply voltage Compact SMS remote control and signaling system, digital inputs, V AC supply voltage Compact SMS remote control and signaling system, digital and analog alarm inputs, V AC supply voltage PSI-MODEM-SHDSL/ETH PSI-MODEM-SHDSL/PB PSI-MODEM-SHDSL/SERIAL SHDSL permanent line with Ethernet interface, V DC supply voltage SHDSL permanent line with PROFIBUS interface, V DC supply voltage SHDSL permanent line with serial interface, V DC supply voltage PSM-KA9SUB9 / BB / 2METER PSI-CAB-GSM/UMTS-5M CSMA-LAMBDA/4-2.0-BS-SET DT-TELE-RJ V.24 (RS-232) D-SUB cable, 2 m GSM and UMTS antenna extension, 5 m GSM and UMTS surge protection DSL surge protection Phoenix Contact provides support during startup and offers practical help: Brief instructions and user manuals Technical consultation The entire product range for "Remote control and remote maintenance", together with technical documentation, can be found on the Internet at: 7

8 Optimum remote access solutions for all applications Cable-based communication Remote maintenance via analog dial-up connection PC for remote maintenance For efficient maintenance and service work worldwide, analog dial-up connections can be used to temporarily access remote control systems and network devices. USB Analog Analog telephone network MPI programming adapter Analog Analog V.24 MPI (RS-232) Ethernet Permanent data transmission with SHDSL permanent lines The plant's own permanent lines can be used to transmit large volumes of data, for example to access control systems in remote pumping stations. SHDSL Any 2-wire cable SHDSL 20 km Ethernet Web panel SHDSL Ethernet 8

9 Mobile phone communication Remote access via Internet and mobile phone network Control room Permanently communicate with your machines and systems via the mobile phone network, which is available worldwide. For example, traffic management systems can be continuously and reliably monitored and controlled. FL MGUARD security router DSL Internet Mobile phone network (GPRS/EDGE/3G) VPN tunnel 3G / router Web panel GPRS/EDGE Ethernet Ethernet Alarm generation via SMS Service technicians can be informed of any faulty states or errors worldwide. This enables fast troubleshooting and ensures that downtimes are minimized. PSI-MODEM-SMS-REL/6DI/4DO/AC Ord.-No SMS relay Mobile phone network PSI-MODEM-SMS-REL/6DI/4DO/AC Ord.-No SMS relay 9

10 Industrial accessories Antennas and interface converters PSI-GSM/UMTS-ANT-OMNI-2-5 and PSI-GSM/ UMTS-QB-ANT multiband antennas are designed for GSM networks with 850 MHz, 900 MHz, 1800 MHz, and 1900 MHz, as well as UMTS networks. The PSI-GSM/UMTS-ANT-OMNI-2-5 antenna is designed for wall and mast mounting outdoors. The PSI-GSM/UMTS-QB-ANT antenna is ideal for mounting on a control cabinet or control box. Outdoor antenna Control cabinet antenna Description Type Order No. Pkt. Type Order No. Pkt. Multiband antenna for wall and mast mounting outdoors for UTMS and quad band GSM, with omnidirectional characteristics, 5 m antenna cable with SMA round connector PSI-GSM/UMTS-ANT-OMNI Multiband antenna for UTMS and quad band GSM, with omnidirectional characteristics, 2 m antenna cable with SMA round connector, IP65 protection, dimensions: 76 x 20 mm PSI-GSM/UMTS-QB-ANT Antenna extension cables and surge protection Antenna extension cables, available in lengths of 5 m and 10 m, enable the optimum positioning of antennas. The surge protection is designed for GSM networks with 850 MHz, 900 MHz, 1800 MHz, and 1900 MHz, as well as for UMTS networks. Antenna extension cable Description Type Order No. Surge protection for coaxial cables Pkt. Type Order No. Pkt. Antenna extension cable for UTMS and quad band GSM, 5 m in length, antenna cable with SMA connector and SMA coupling PSI-CAB-GSM/UMTS-5M Antenna extension cable for UTMS and quad band GSM, 10 m in length, antenna cable with SMA connector and SMA coupling PSI-CAB-GSM/UMTS-10M Surge protection for UTMS and quad band GSM antennas, with SMA connector and SMA coupling CSMA-LAMBDA/4-2.0-BS-SET

11 Programming adapter The MPI adapter can be used to convert a serial V.24 (RS-232) interface to an MPI bus (19.2 or kbps). It is used to couple s, Bluetooth converters, and FL COM SERVER devices to the programming interface of a Siemens SIMATIC S7 300/400 controller. Programming adapter Programming set Description Type Order No. Pkt. Type Order No. Pkt. MPI adapter for coupling to the programming interface of a Siemens SIMATIC S7-300/400 controller PSI-MPI/RS232-PC Programming set for the remote control of Siemens SIMATIC S7-300/400 controllers, comprising preconfigured analog, V.24 (RS-232) cable, and MPI adapter Outdoor antenna PSI-MODEM-MPI-SET Interface converter and SHDSL surge protection Interface converter Enables switching to a second termination device with V.24 (RS-232) interface. SHDSL surge protection Surge protection for broadband communication devices. Interface converter SHDSL surge protection Description Type Order No. Pkt. Type Order No. Pkt. Interface converter for switching between two V.24 (RS-232) interfaces PSI-MODEM-SPLITTER V.24 (RS-232) flat-ribbon connecting cable between and PSI-MODEM-SPLITTER PSI-CA-MODEM-SPLITTER DATATRAB, surge protection for two signal wire pairs of the DSL telecommunications interface DT-TELE-RJ

12 Further information on the products presented here and on the world of the solutions from Phoenix Contact can be found at Industrial Connection Technology, Marking Systems and Mounting Material CLIPLINE Connection Technology for Field Devices and Field Cabling PLUSCON Or contact us directly! Device Connection Technology and Electronic Housings COMBICON GmbH & Co. KG Blomberg, Germany Phone: Fax: Components and Systems AUTOMATION Power and Signal Quality TRABTECH Signal Converters, Switching Devices, Power Supply Units INTERFACE MNR / Printed in Germany 2011