Series # Flanged Cast Steel Gate Valve Features

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Series # Flanged Cast Steel Gate Valve Features"

Transcription

1 Series # Flanged Cast Steel Gate Valve Features SHARPE - SERIES # Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Tongue and groove between body and bonnet Applicable Standards: Gate valves API 600 Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

2 2" - 12" Dimensions, Parts & Materials I 15 SHARPE - SERIES # Flanged Cast Steel Gate Valve & & 23 D C Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes / G F A E B H No. Part Name Material 1 Body Carbon Steel ASTM A216 2 Seat A105 & STL.6 3 Wedge Carbon Stee & Stainless Steel 4 Stem A182 - F6a 5 Gasket 304 Stainless Steel & Graphite 5A Bolt B7 Steel ASTM A193 6 Bonnet Carbon Steel ASTM A216 7 Back Seat 410 Stainless Steel 8 Gland Packing 304 Stainless Steel & Graphite 9 Gland Packing Flexible Graphite 10 Gland 410 Stainless Steel 11 Gland Flange Carbon Steel ASTM A Stem Nut A439-D2 13 Gland Nut Carbon Steel 14 Handwheel Ductile Iron 15 Lock Nut Carbon Steel 16 Grease Nipple Carbon Steel 17 Eye Nut B7 Steel ASTM A Eye Bolt 2H Steel ASTM A Pin Carbon Steel 20 Bolt B7 Steel ASTM A Nut 2H Steel ASTM A Name Plate 304 Stainless Steel 23 Rivet 304 Stainless Steel

3 14" - 24" Dimensions, Parts & Materials I SHARPE - SERIES # Flanged Cast Steel Gate Valve D E Size A B C D E F G H I Num of Bolt Holes G F A B A C H No. Part Name Material 1 Body Carbon Steel ASTM A216 2 Seat A105 & STL.6 3 Wedge Carbon Stee & Stainless Steel 4 Stem A182 - F6a 5A Bolt B7 Steel ASTM A193 6 Bonnet Carbon Steel ASTM A216 7 Back Seat 410 Stainless Steel 8 Gland Packing 304 Stainless Steel & Graphite 9 Gland Packing Flexible Graphite 10 Gland 410 Stainless Steel 11 Gland Flange Carbon Steel ASTM A Stem Nut A439-D2 13 Gland Nut Carbon Steel 14 Handwheel Ductile Iron 15 Lock Nut Carbon Steel 16 Grease Nipple Carbon Steel 17 Eye Nut B7 Steel ASTM A Eye Bolt 2H Steel ASTM A Pin Carbon Steel 20 Bolt B7 Steel ASTM A Nut 2H Steel ASTM A Name Plate 304 Stainless Steel 23 Rivet 304 Stainless Steel 24 Nut 2H Steel A Axletree 26 Yoke Carbon Steel ASTM A Gasket 304 Stainless Steel & Graphite

4 Technical Information SHARPE - SERIES # Flanged Cast Steel Gate Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Carbon Steel Size Series Class Ends Body Material Options Flange 4 Carbon Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

5 Series # Flanged Cast Steel Gate Valve Features SHARPE - SERIES # Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Gate valves API 600 Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

6 2" -12" Dimensions, Parts & Materials I SHARPE - SERIES # Flanged Cast Steel Gate Valve & & 24 Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes / G F E A B C D H No. Part Name Material 1 Body Carbon Steel ASTM A216 2 Seat A105 & STL.6 3 Wedge Carbon Stee & Stainless Steel 4 Stem A182 - F6a 5 Gasket 304 Stainless Steel & Graphite 6 Bonnet Carbon Steel ASTM A216 7 Back Seat 410 Stainless Steel 8 Gland Packing 304 Stainless Steel & Graphite 9 Distance Ring 410 Stainless Steel 10 Gland Packing Flexible Graphite 11 Gland 410 Stainless Steel 12 Gland Flange Carbon Steel ASTM A Stem Nut A439-D2 14 Gland Nut Carbon Steel 15 Lock Nut Carbon Steel 16 Handwheel Ductile Iron 17 Grease Nipple Carbon Steel 18 Eye Nut B7 Steel A Eye Bolt 2H Steel A Pin Carbon Steel 21 Bolt B7 Steel A Nut 2H Steel A Name Plate 304 Stainless Steel 24 Rivet 304 Stainless Steel

7 12" - 24" Dimensions, Parts & Materials I H SHARPE - SERIES # Flanged Cast Steel Gate Valve Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes G F E A B C D No. Part Name Material 1 Body Carbon Steel ASTM A216 2 Seat A105 & STL.6 3 Wedge Carbon Steel & Stainless Steel 4 Stem A182 - F6a 5 Gasket 304 Stainless Steel & Graphite 6 Bonnet Carbon Steel ASTM A216 7 Back Seat 410 Stainless Steel 8 Gland Packing 304 Stainless Steel & Graphite 9 Distance Ring 410 Stainless Steel 10 Gland Packing Flexible Graphite 11 Gland 410 Stainless Steel 12 Gland Flange Carbon Steel ASTM A Axletree 14 Gland Nut Carbon Steel 15 Stem Nut A439-D2 16 Lock Nut Carbon Steel 17 Handwheel Ductile Iron 18 Grease Nipple Carbon Steel 19 Eye Bolt 2H Steel A Eye Nut B7 Steel A Yoke Carbon Steel ASTM A Pin Carbon Steel 23 Bolt B7 Steel A Nut 2H Steel A Bolt B7 Steel A Nut 2H Steel A Name Plate 304 Stainless Steel 28 Rivet 304 Stainless Steel

8 Technical Information SHARPE - SERIES # Flanged Cast Steel Gate Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Carbon Steel Size Series Class Ends Body Material Options Flange 4 Carbon Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

9 Series # Flanged Cast Steel Gate Valve Features SHARPE - SERIES # Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Gate valves API 600 Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

10 2" - 6" Dimensions, Parts & Materials I SHARPE - SERIES # Flanged Cast Steel Gate Valve & & 24 Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes / G F E A B C 0.25 D H No. Part Name Material 1 Body Carbon Steel ASTM A216 2 Seat A105 & STL.6 3 Wedge Carbon Stee & Stainless Steel 4 Stem A182 - F6a 5 Gasket 304 Stainless Steel & Graphite 6 Bonnet Carbon Steel ASTM A216 7 Back Seat 410 Stainless Steel 8 Gland Packing 304 Stainless Steel & Graphite 9 Distance Ring 410 Stainless Steel 10 Gland Packing Flexible Graphite 11 Gland 410 Stainless Steel 12 Gland Flange Carbon Steel ASTM A Stem Nut A439-D2 14 Gland Nut Carbon Steel 15 Lock Nut Carbon Steel 16 Handwheel Ductile Iron 17 Grease Nipple Carbon Steel 18 Eye Nut B7 Steel A Eye Bolt 2H Steel A Pin Carbon Steel 21 Bolt B7 Steel A Nut 2H Steel A Name Plate 304 Stainless Steel 24 Rivet 304 Stainless Steel

11 8" - 24" Dimensions, Parts & Materials I H SHARPE - SERIES # Flanged Cast Steel Gate Valve Size A B C D E F G H I Num of Bolt Holes G F E A B C D No. Part Name Material 1 Body Carbon Steel ASTM A216 2 Seat A105 & STL.6 3 Wedge Carbon Stee & Stainless Steel 4 Stem A182 - F6a 5 Gasket 304 Stainless Steel & Graphite 6 Bonnet Carbon Steel ASTM A216 7 Back Seat 410 Stainless Steel 8 Gland Packing 304 Stainless Steel & Graphite 9 Distance Ring 410 Stainless Steel 10 Gland Packing Flexible Graphite 11 Gland 410 Stainless Steel 12 Gland Flange Carbon Steel ASTM A Stem Nut A439-D2 14 Gland Nut Carbon Steel 15 Lock Nut Carbon Steel 16 Handwheel Ductile Iron 17 Grease Nipple Carbon Steel 18 Eye Bolt 2H Steel A Eye Nut B7 Steel A Yoke Carbon Steel ASTM A Pin Carbon Steel 22 Bolt B7 Steel A Nut 2H Steel A Bolt B7 Steel A Nut 2H Steel A Name Plate 304 Stainless Steel 27 Rivet 304 Stainless Steel

12 Technical Information SHARPE - SERIES # Flanged Cast Steel Gate Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Carbon Steel Size Series Class Ends Body Material Options Flange 4 Carbon Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

13 Series # Flanged Stainless Steel Gate Valve Features SHARPE - SERIES # Flanged Stainless Steel Gate Valve Outside screw and yoke Bolted bonnet Flexible wedge, fully guidedtegrated seats Rising stem and non-rising hand-wheel Applicable Standards: Gate valves API 603 Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

14 1/2" - 12" Dimensions, Parts & Materials H 12 SHARPE - SERIES # Flanged Stainless Steel Gate Valve C D E F A Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes 1/ / / / G I B No. Part Name Qty Material 1 Body Stainless Steel 2 Disc Stainless Steel 3 Bonnet Bolt Stainless Steel 4 Bonnet Nut Stainless Steel 5 Bonnet Stainless Steel 6 Hinge Pin Stainless Steel 7 Eye Bolt Stainless Steel 8 Gland Stainless Steel 9 Eye Nut Stainless Steel 10 Hand Wheel 1 Carbon Steel 11 Nut 1 Brass 12 Stem Stainless Steel 13 Name Plate Stainless Steel 14 Spring 1 Brass 15 Yoke Sleeve 1 Brass 16 Gland Packing 1 PTFE 17 Packing 1 PTFE 18 Gasket 1 15%R + PTFE

15 14" - 24" Dimensions, Parts & Materials H C SHARPE - SERIES # Flanged Stainless Steel Gate Valve Size A B C D E F G H I Num of Bolt Holes B I G A F E D No. Part Name Material 1 Body 316 Stainless Steel 2 Seal Face 316 Stainless Steel 3 Wedge 316 Stainless Steel 4 Stem 316 Stainless Steel 5 Gasket Solid Metal Serrated Gasket 6 Bonnet 316 Stainless Steel 7 Bonnet Bolt B8 A193 8 Bonnet Nut Gr. 8 A194 9 Stem Packing Graphite 10 Gland 316 Stainless Steel 11 Gland Flange CF8 A Gland Eyebolt B8 A Gland Nut Gr. 8 A Yoke 316 Stainless Steel 15 Stem Nut Steel 16 Hand Wheel Ductile Iron 17 Lock Nut ANSI 1020

16 Technical Information SHARPE - SERIES # Flanged Stainless Steel Gate Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Stainless Steel Size Series Class Ends Body Material Options 1/ Flange 1 Flange Stainless Steel X Oxygen Service 3/4 2 Butt weld SF Silicon Free 1 RTJ Ring Type Joint Flange 1-1/ / Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

17 Series # Flanged Stainless Steel Gate Valve Features SHARPE - SERIES # Flanged Stainless Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

18 2" - 12" Dimensions, Parts & Materials D SHARPE - SERIES # Flanged Stainless Steel Gate Valve C E F G A Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes / H I B & No. Part Name Qty Material 1 Body Stainless Steel 2 Disc Stainless Steel 3 Bonnet Bolt Stainless Steel 4 Bonnet Nut Stainless Steel 5 Bonnet Stainless Steel 6 Hinge Pin Stainless Steel 7 Eye Bolt Stainless Steel 8 Gland Stainless Steel 9 Eye Nut Stainless Steel 10 Hand Wheel 1 Carbon Steel 11 Nut 1 Brass 12 Stem Stainless Steel 13 Name Plate Stainless Steel 14 Spring 1 Brass 15 Yoke Sleeve 1 Brass 16 Gland Packing 1 PTFE 17 Packing 1 PTFE 18 Gasket Graphite

19 14" - 20" Dimensions, Parts & Materials H SHARPE - SERIES # Flanged Stainless Steel Gate Valve Size A B C D E F G H I Num of Bolt Holes / / / / /8 24 B I G A F E D C No. Part Name Material 1 Body 316 Stainless Steel 2 Seal Face 316 Stainless Steel 3 Wedge 316 Stainless Steel 4 Stem 316 Stainless Steel 5 Gasket Solid Metal Serrated Gasket 6 Bonnet 316 Stainless Steel 7 Bonnet Bolt B8 A193 8 Bonnet Nut Gr. 8 A194 9 Stem Packing Graphite 10 Gland 316 Stainless Steel 11 Gland Flange CF8 A Gland Eyebolt B8 A Gland Nut Gr. 8 A Yoke 316 Stainless Steel 15 Stem Nut Steel 16 Hand Wheel Ductile Iron 17 Lock Nut ANSI 1020

20 Technical Information SHARPE - SERIES # Flanged Stainless Steel Gate Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Stainless Steel Size Series Class Ends Body Material Options 1/ Flange Stainless Steel X Oxygen Service 3/4 2 Buttweld SF Silicon Free 1 RTJ Ring Type Joint Flange 1-1/ / Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

21 Series # Flanged Cast Steel Globe Valve Features SHARPE - SERIES # Flanged Cast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge Connection meets API 600 Pull Test Welded Seat Yoke Integrated with Bonnet Lose Disc Renewable Seat Rings Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

22 2" - 6" Dimensions, Parts & Materials I H SHARPE - SERIES # Flanged Cast Steel Globe Valve Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes / G F E A B C D No. Part Name Qty Material 1 Body 1 Carbon Steel ASTM A216 2 Seat 1 A105 & STL.6 3 Disc 1 A105 & 410 Stainless Steel 4 Thrust Plate Stainless Steel 5 Disc Cover Stainless Steel 6 Stem 1 A182 F6a 7 Gasket Stainless Steel & Flexible Graphite 8 Bonnet 1 Carbon Steel ASTM A216 9 Bolt 1 B7 Steel A Nut 1 2H Steel A Pin 1 Carbon Steel 12 Gland Flange 1 Carbon Steel 13 Eye Bolt 1 B7 Steel A Eye Nut 1 2H Steel A Stem Nut 1 D-2 16 Gasket Stainless Steel 17 Nut 1 Carbon Steel 18 Handwheel 1 Ductile Iron 19 Screw 1 Carbon Steel 20 Gland Stainless Steel 21 Packing Stainless Steel & Graphite 22 Packing 1 Flexible Graphite 23 Back Seat Stainless Steel 24 Rivet Stainless Steel 25 Name Plate Stainless Steel

23 8" - 16" Dimensions, Parts & Materials I H SHARPE - SERIES # Flanged Cast Steel Globe Valve Size A B C D E F G H I Num of Bolt Holes G F E A B C D No. Part Name Qty Material 1 Body 1 Carbon Steel ASTM A216 2 Seat 1 A105 & STL.6 3 Disc 1 A105 & 410 Stainless Steel 4 Disc Cover Stainless Steel 5 Stem 1 A182 F6a 6 Gasket Stainless Steel & Flexible Graphite 7 Bonnet 1 Carbon Steel ASTM A216 8 Bolt 1 B7 Steel A193 9 Nut 1 2H Steel A Pin 1 Carbon Steel 11 Gland Flange 1 Carbon Steel 12 Eye Bolt 1 B7 Steel A Eye Nut 1 2H Steel A Stem Nut 1 D-2 15 Gasket Stainless Steel 16 Nut 1 Carbon Steel 17 Handwheel 1 Ductile Iron 18 Screw 1 Carbon Steel 19 Gland Stainless Steel 20 Packing Stainless Steel & Graphite 21 Packing 1 Flexible Graphite 22 Back Seat Stainless Steel 23 Rivet Stainless Steel 24 Name Plate Stainless Steel

24 Technical Information SHARPE - SERIES # Flanged Cast Steel Globe Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Carbon Steel Size Series Class Ends Body Material Options Flange 4 Carbon Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required. 10/12

25 Series # Flanged Cast Steel Globe Valve Features SHARPE - SERIES # Flanged Cast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge Connection meets API 600 Pull Test Welded Seat Yoke Integrated with Bonnet Lose Disc Renewable Seat Rings Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

26 I 2" - 6" Dimensions, Parts & Materials H SHARPE - SERIES # Flanged Cast Steel Globe Valve Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes / G F E A B C D No. Part Name Qty Material 1 Body 1 Carbon Steel ASTM A216 2 Seat 1 A105 & STL.6 3 Disc 1 A105 & 410 Stainless Steel 4 Thrust Plate Stainless Steel 5 Disc Cover Stainless Steel 6 Stem 1 A182 F6a 7 Gasket Stainless Steel & Flexible Graphite 8 Bonnet 1 Carbon Steel ASTM A216 9 Bolt 1 B7 Steel A Nut 1 2H Steel A Pin 1 Carbon Steel 12 Gland Flange 1 Carbon Steel 13 Eye Bolt 1 B7 Steel A Eye Nut 1 2H Steel A Stem Nut 1 D-2 16 Gasket Stainless Steel 17 Nut 1 Carbon Steel 18 Handwheel 1 Ductile Iron 19 Screw 1 Carbon Steel 20 Gland Stainless Steel 21 Packing Stainless Steel & Graphite 22 Distance Ring Stainless Steel 23 Packing 1 Flexible Graphite 24 Back Seat Stainless Steel 25 Rivet Stainless Steel 26 Name Plate Stainless Steel

27 8" - 16" Dimensions, Parts & Materials I H SHARPE - SERIES # Flanged Cast Steel Globe Valve Size A B C D E F G H I Num of Bolt Holes G F A B E C D No. Part Name Qty Material 1 Body 1 Carbon Steel ASTM A216 2 Seat 1 A105 & STL.6 3 Disc 1 A105 & 410 Stainless Steel 4 Thrust Plate Stainless Steel 5 Disc Cover Stainless Steel 6 Stem 1 A182 F6a 7 Gasket Stainless Steel & Flexible Graphite 8 Bonnet 1 Carbon Steel ASTM A216 9 Bolt 1 B7 Steel A Nut 1 2H Steel A Pin 1 Carbon Steel 12 Gland Flange 1 Carbon Steel 13 Eye Bolt 1 B7 Steel A Eye Nut 1 2H Steel A Stem Nut 1 D-2 16 Gasket Stainless Steel 17 Nut 1 Carbon Steel 18 Handwheel 1 Ductile Iron 19 Screw 1 Carbon Steel 20 Gland Stainless Steel 21 Packing Stainless Steel & Graphite 22 Distance Ring Stainless Steel 23 Packing 1 Flexible Graphite 24 Back Seat Stainless Steel 25 Rivet Stainless Steel 26 Name Plate Stainless Steel

28 Technical Information SHARPE - SERIES # Flanged Cast Steel Globe Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Carbon Steel Size Series Class Ends Body Material Options Flange 4 Carbon Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

29 Series # Flanged Cast Steel Globe Valve Features SHARPE - SERIES # Flanged Cast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge Connection meets API 600 Pull Test Welded Seat Yoke Integrated with Bonnet Lose Disc Renewable Seat Rings Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

30 2" - 6" Dimensions, Parts & Materials I SHARPE - SERIES # Flanged Cast Steel Globe Valve Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes / G F E E A B C D H No. Part Name Material 1 Body Carbon Steel ASTM A216 2 Seat A105 & STL.6 3 Disc A105 & 410 Stainless Steel 4 Thrust Plate 410 Stainless Steel 5 Disc Cover 410 Stainless Steel 6 Stem A182 F6a 7 Gasket 304 Stainless Steel & Flexible Graphite 8 Bonnet Carbon Steel ASTM A216 9 Bolt B7 Steel A Nut 2H Steel A Pin Carbon Steel 12 Gland Flange Carbon Steel 13 Eye Bolt B7 Steel A Eye Nut 2H Steel A Stem Nut D-2 16 Gasket 410 Stainless Steel 17 Nut Carbon Steel 18 Handwheel Ductile Iron 19 Screw Carbon Steel 20 Gland 410 Stainless Steel 21 Packing 304 Stainless Steel & Graphite 22 Distance Ring 410 Stainless Steel 23 Packing Flexible Graphite 24 Back Seat 410 Stainless Steel 25 Rivet 304 Stainless Steel 26 Name Plate 304 Stainless Steel

31 8" - 12" Dimensions, Parts & Materials I H SHARPE - SERIES # Flanged Cast Steel Globe Valve Size A B C D E F G H I Num of Bolt Holes G F E E A B C D No. Part Name Qty Material 1 Body 1 Carbon Steel ASTM A216 2 Seat 1 A105 & STL.6 3 Disc 1 A105 & 410 Stainless Steel 4 Disc Cover Stainless Steel 5 Stem 1 A182 F6a 6 Gasket Stainless Steel & Flexible Graphite 7 Bonnet 1 Carbon Steel ASTM A216 8 Bolt 1 B7 Steel A193 9 Nut 1 2H Steel A Pin 1 Carbon Steel 11 Gland Flange 1 Carbon Steel 12 Eye Bolt 1 B7 Steel A Eye Nut 1 2H Steel A Stem Nut 1 D-2 15 Gasket Stainless Steel 16 Nut 1 Carbon Steel 17 Handwheel 1 Ductile Iron 18 Screw 1 Carbon Steel 19 Gland Stainless Steel 20 Packing Stainless Steel & Graphite 21 Distance Ring Stainless Steel 22 Packing 1 Flexible Graphite 23 Back Seat Stainless Steel 24 Rivet Stainless Steel 25 Name Plate Stainless Steel

32 Technical Information SHARPE - SERIES # Flanged Cast Steel Globe Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Carbon Steel Size Series Class Ends Body Material Options Flange 4 Carbon Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

33 Series # Flanged Stainless Steel Globe Valve Features SHARPE - SERIES # Flanged Stainless Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge Connection meets API 600 Pull Test Welded Seat Yoke Integrated with Bonnet Lose Disc Renewable Seat Rings Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

34 1/2" - 12" Dimensions, Parts & Materials H SHARPE - SERIES # Flanged Stainless Steel Globe Valve Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes 1/ / / / B I G A F E D No. Part Name Qty Material 1 Body Stainless Steel 2 Disc Stainless Steel 3 Seat Ring Stainless Steel 4 Stem Stainless Steel 5 Bonnet Bolt Stainless Steel 6 Gasket Stainless Steel & Graphite 7 Bonnet Stainless Steel 8 Gland Packing 1 PTFE 9 Pin Stainless Steel 10 Gland Sleeve 1 PTFE 11 Eye Bolt Stainless Steel 12 Gland Stainless Steel 13 Nut Stainless Steel 14 Yoke Sleeve 1 Brass 15 Handwheel 1 Ductile Iron 16 Washer Stainless Steel 17 Nut Stainless Steel C

35 Parts & Materials H H C C SHARPE - SERIES # Flanged Stainless Steel Globe Valve B Size A B C D E F G H I Num of Bolt Holes I G A F E D No. Part Name Material 1 Body 316 Stainless Steel 2 Seal Facing 316 Stainless Steel 3 Disc 316 Stainless Steel 4 Disc Nut 316 Stainless Steel 5 Stem 316 Stainless Steel 6 Gasket 316 Stainless Steel & Graphite 7 Bonnet 316 Stainless Steel 8 Bonnet Bolt B8 Stainless Steel 9 Bonnet Nut Grade 8 Nut 10 Stem Packing Graphite 11 Gland 316 Stainless Steel 12 Gland Flange 316 Stainless Steel 13 Gland Eyebolt B8 Stainless Steel 14 Gland Nut Grade 8 Nut 15 Stem Nut Steel 16 Hand Wheel Ductile Iron 17 Gear Box Ductile Iron

36 Technical Information SHARPE - SERIES # Flanged Stainless Steel Globe Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Stainless Steel Size Series Class Ends Body Material Options Flange Stainless Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

37 Series # Flanged Stainless Steel Globe Valve Features SHARPE - SERIES # Flanged Stainless Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge Connection meets API 600 Pull Test Welded Seat Yoke Integrated with Bonnet Lose Disc Renewable Seat Rings Flexible wedge, fully guided integrated seats Rising stem and non-rising hand-wheel Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

38 1/2" - 6" Dimensions, Parts & Materials D C SHARPE - SERIES # Flanged Stainless Steel Globe Valve E F G A Size A B C D E F G H I Num of Bolt Holes 1/ / / / H I B No. Part Name Qty Material 1 Body Stainless Steel 2 Disc Stainless Steel 3 Seat Ring Stainless Steel 4 Stem Stainless Steel 5 Bonnet Bolt Stainless Steel 6 Gasket Stainless Steel & Graphite 7 Bonnet Stainless Steel 8 Gland Packing 1 PTFE 9 Pin Stainless Steel 10 Gland Sleeve 1 PTFE 11 Eye Bolt Stainless Steel 12 Gland Stainless Steel 13 Nut Stainless Steel 14 Yoke Sleeve 1 Brass 15 Handwheel 1 Ductile Iron 16 Washer Stainless Steel 17 Nut Stainless Steel

39 8" - 16" Parts & Materials H H C C SHARPE - SERIES # Flanged Stainless Steel Globe Valve B Dimensions (Inches) Size A B C D E F G H I Num of Bolt Holes I G A F E D No. Part Name Material 1 Body 316 Stainless Steel 2 Seal Facing 316 Stainless Steel 3 Disc 316 Stainless Steel 4 Disc Nut 316 Stainless Steel 5 Stem 316 Stainless Steel 6 Gasket 316 Stainless Steel & Graphite 7 Bonnet 316 Stainless Steel 8 Bonnet Bolt B8 Stainless Steel 9 Bonnet Nut Grade 8 Nut 10 Stem Packing Graphite 11 Gland 316 Stainless Steel 12 Gland Flange 316 Stainless Steel 13 Gland Eyebolt B8 Stainless Steel 14 Gland Nut Grade 8 Nut 15 Stem Nut Steel 16 Hand Wheel Ductile Iron 17 Gear Box Ductile Iron

40 Technical Information SHARPE - SERIES # Flanged Stainless Steel Globe Valve Ordering Shell Test Water Seat Test Water Seat Test Air Fig: Description: 8 - Series # Flange Ends - Stainless Steel Size Series Class Ends Body Material Options Flange Stainless Steel X Oxygen Service 2-1/2 2 Buttweld SF Silicon Free 3 RTJ Ring Type Joint Flange Temperature F Working Pressure -20 to /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

41 Series # Flanged Cast Steel Check Valve Features SHARPE - SERIES # Flanged Cast Steel Check Valve Bolted Cover Swing Type Horizontal or Vertical lines Welded Seat Renewable Seat Rings Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598 Technical Information Temperature F Working Pressure -20 to

42 Dimensions, Parts & Materials 4 & Above SHARPE - SERIES # Flanged Cast Steel Check Valve 10/12 Size A B C D E F G Num of Bolt Holes / Ordering Fig: Description: 8 - Series # Flange Ends - Cast Steel G F E A B C D Size Series Class Ends Body Material Options Flange 4 Cast Steel X Oxygen Service 2-1/ Buttweld SF Silicon Free 3 18 RTJ Ring Type Joint Flange Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required. No. Part Name Material 1 Body Carbon Steel A216 2 Seat A105 & STL.6 3 Disc A105 & 410 Stainless Steel 4 Hinge Carbon Steel A216 5 Gasket A Nut A Pin A Rivit 304 Stainless Steel 9 Name Plate 304 Stainless Steel 10 Gasket F304 & Flexible Graphite 11 Bonnet Carbon Steel A Bolt B7 Steel A Nut 2H Steel A Gasket Soft Iron 15 Plug 410 Stainless Steel 16 Pin 304 Stainless Steel 17 Eyebolt Carbon Steel 18 Gasket F304 & Flexible Graphite 19 Bolt Carbon Steel 20 Gland Carbon Steel

43 Series # Flanged Cast Steel Check Valve Features SHARPE - SERIES # Flanged Cast Steel Check Valve Bolted Cover Swing Type Horizontal or Vertical lines Welded Seat Renewable Seat Rings Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598 Temperature F Working Pressure -20 to

44 Dimensions, Parts & Materials 4 & Above & SHARPE - SERIES # Flanged Cast Steel Check Valve G Size A B C D E F G Num of Bolt Holes / Ordering F E A B C D Fig: Description: 8 - Series # Flange Ends - Carbon Steel Size Series Class Ends Body Material Options Flange 4 Cast Steel X Oxygen Service 2-1/ Buttweld SF Silicon Free 3 16 RTJ Ring Type Joint Flange No. Part Name Material 1 Body Carbon Steel A216 2 Seat A105 & STL.6 3 Disc A105 & 410 Stainless Steel 4 Hinge Carbon Steel A216 5 Gasket A Nut A Pin A Rivit 304 Stainless Steel 9 Name Plate 304 Stainless Steel 10 Gasket F304 & Flexible Graphite 11 Bonnet Carbon Steel A Bolt B7 Steel A Nut 2H Steel A Gasket Soft Iron 15 Plug 410 Stainless Steel 16 Pin 304 Stainless Steel 17 Eyebolt Carbon Steel 18 Gasket F304 & Flexible Graphite 19 Bolt Carbon Steel 20 Gland Carbon Steel 10/12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

45 SHARPE - SERIES # Flanged Cast Steel Check Valve Series # Flanged Cast Steel Check Valve Features Bolted Cover Swing Type Horizontal or Vertical lines Welded Seat Renewable Seat Rings Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598 Temperature F Working Pressure -20 to

46 Dimensions, Parts & Materials 4 & Above SHARPE - SERIES # Flanged Cast Steel Check Valve Ordering G Size A B C D E F G Num of Bolt Holes / Fig: Description: 8 - Series # Flange Ends - Cast Steel F E A B C D Size Series Class Ends Body Material Options Flange 4 Cast Steel X Oxygen Service 2-1/ Buttweld SF Silicon Free 3 16 RTJ Ring Type Joint Flange No. Part Name Material 1 Body Carbon Steel A216 2 Seat A105 & STL.6 3 Disc A105 & 410 Stainless Steel 4 Hinge Carbon Steel A216 5 Gasket A Nut A Pin A Rivit 304 Stainless Steel 9 Name Plate 304 Stainless Steel 10 Gasket F304 & Flexible Graphite 11 Bonnet Carbon Steel A Bolt B7 Steel A Nut 2H Steel A Gasket Soft Iron 15 Plug 410 Stainless Steel 16 Pin 304 Stainless Steel 17 Eyebolt Carbon Steel 18 Gasket F304 & Flexible Graphite 19 Bolt Carbon Steel 20 Gland Carbon Steel 10/12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

47 Series # Flanged Stainless Steel Check Valve Features SHARPE - SERIES # Flanged Stainless Steel Check Valve Bolted Cover Swing Type Horizontal or Vertical lines Welded Seat Renewable Seat Rings Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

48 1/2" - 14" Dimensions, Parts & Materials C SHARPE - SERIES # Flanged Stainless Steel Check Valve H B Size A B C D E F G H Num of Bolt Holes 1/ / / / G A F E D No. Part Name Material 1 Body 316 Stainless Steel 2 Disc 316 Stainless Steel 3 Nut 304 Stainless Steel 4 Arm Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket PTFE 7 Washer 304 Stainless Steel 8 Bolt 304 Stainless Steel 9 Bonnet 316 Stainless Steel 10 Bolt 304 Stainless Steel

49 16" - 24" Dimenisons, Parts & Materials C SHARPE - SERIES # Flanged Stainless Steel Check Valve Size A B C D E F G H Num of Bolt Holes F B G A F E No. Part Name Material 1 Body 316 Stainless Steel 2 Seal Facing 316 Stainless Steel 3 Disc 316 Stainless Steel 4 Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket 316 Stainless Steel + Graphite 7 Cover 316 Stainless Steel 8 Cover Bolt B8 Stainless Steel 9 Cover Nut Grade 8 Nut D

50 Technical Information SHARPE - SERIES # Flanged Stainless Steel Check Valve Ordering Temperature F Working Pressure -20 to Fig: Description: 8 - Series # Flange Ends - Stainless Steel Size Series Class Ends Body Material Options 1/ Flange Stainless Steel X Oxygen Service 3/4 2 Buttweld SF Silicon Free 1 RTJ Ring Type Joint Flange 1-1/ / /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

51 Series # Flanged Stainless Steel Check Valve Features SHARPE - SERIES # Flanged Stainless Steel Check Valve Bolted Cover Swing Type Horizontal or Vertical lines Welded Seat Renewable Seat Rings Applicable Standards: Steel valves ANSI B16.34 Face to face ANSI B16.10 End flanges ANSI B16.5 Buttweld ends ANSI B16.25 Inspection and test API 598

52 1/2" - 8" Dimensions, Parts & Materials C SHARPE - SERIES # Flanged Stainless Steel Check Valve H B Size A B C D E F G H Num of Bolt Holes 1/ / / / G A F E D No. Part Name Material 1 Body 316 Stainless Steel 2 Disc 316 Stainless Steel 3 Nut 304 Stainless Steel 4 Arm Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket PTFE 7 Washer 304 Stainless Steel 8 Bolt 304 Stainless Steel 9 Bonnet 316 Stainless Steel 10 Bolt 304 Stainless Steel

53 10" - 24" Dimensions, Parts & Materials SHARPE - SERIES # Flanged Stainless Steel Check Valve Size A B C D E F G H Num of Bolt Holes F B G A F No. Part Name Material 1 Body 316 Stainless Steel 2 Seal Facing 316 Stainless Steel 3 Disc 316 Stainless Steel 4 Hinge 316 Stainless Steel 5 Hinge Pin 316 Stainless Steel 6 Gasket 316 Stainless Steel + Graphite 7 Cover 316 Stainless Steel 8 Cover Bolt B8 Stainless Steel 9 Cover Nut Grade 8 Nut E D C

54 Technical Information SHARPE - SERIES # Flanged Stainless Steel Check Valve Ordering Temperature F Working Pressure -20 to Fig: Description: 8 - Series # Flange Ends - Stainless Steel Size Series Class Ends Body Material Options 1/ Flange Stainless Steel X Oxygen Service 3/4 2 Buttweld SF Silicon Free 1 RTJ Ring Type Joint Flange 1-1/ / /12 Due to continuous development of our product range, we reserve the right to change the dimensions and information for this product as required.

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

Series # Flanged Cast Steel Globe Valve Features

Series # Flanged Cast Steel Globe Valve Features Series 45114 150# Flanged ast Steel Globe Valve Features SARP - SRIS 45114 150# Flanged ast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge onnection meets API 600 Pull Test Welded

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

Series # Flanged Cast Steel Check Valve

Series # Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve Design eatures Bolted Cover Swing Type Integral Seat Applicable Standards Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Butt-weld

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

NEWCO. Forged Steel Valves. Technical Data TC9308-4

NEWCO. Forged Steel Valves. Technical Data TC9308-4 NEWCO Forged Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures

More information

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES

STORAGE, INSTALLATION AND MAINTENANCE PROCEDURES GATE VALVE O.S. & Y 1.0 Periodic Inspections 1.1 The valve stem packing should be inspected at least monthly. If the stem packing shows signs of leakage, simply tighten the adjusting nuts to compress the

More information

Pacific HF Acid Valves

Pacific HF Acid Valves Pacific HF Acid Valves PACIFIC VAVES HF ACID API 602 and API 600 By Subject UOP and Phillips Valve Index...4 Product/arket Overview...5 API 602 Compact Gate Valve Features...6 API 600 Bolted Bonnet Gate

More information

Pacific Valves Cast Steel Bolted Bonnet

Pacific Valves Cast Steel Bolted Bonnet Pacific Valves Cast Steel Bolted Bonnet PACIFIC VALVES By Subject Product Overview...4-5 Materials and Trims...6 Gate Valves Major Features...7 Gate Valves Optional Features...8 Materials of Construction:

More information

PRODUCT CATALOGUE. Cryogenic Valves

PRODUCT CATALOGUE. Cryogenic Valves PRODUCT CATALOGUE Cryogenic Valves A FEW FACTS ABOUT MACK S. Since its establishment in 1939, Mack Valves have grown to become a leading provider of unique flow control, pressure reducing and safety relief

More information

PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R

PWGSC Ontario STEAM AND CONDENSATE Section Region Project HEATING PIPING Page 1 Number R Region Project HEATING PIPING Page 1 PART 1 - GENERAL 1.1 SECTION.1 Materials and installation of steel piping INCLUDES valves, fittings for steam and condensate building services piping. 1.2 RELATED.1

More information

TECHNICAL DATASHEET CRANE - Cast Steel Valves

TECHNICAL DATASHEET CRANE - Cast Steel Valves brands you trust. TECHNICAL DATASHEET CRANE - Cast Valves Index Ordering Information... 3 Materials... 4 Identification... 5 Gate Valve Features... 6 NACE Trim Valves...10 Globe Valve Features...11 Swing

More information

Crane Cast Steel Valves

Crane Cast Steel Valves Crane Cast Valves Cast Valves General Index Ordering Information... 4 Materials... 5 General Data... 6 Identification... 7 General Features... 8 Gate Valve Features... 9 NACE Trim Valves...13 Globe Valve

More information

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance

More information

Fig Non-Return Valves. Selected Lunkenheimer Boiler Mountings. Cast Iron. 250 lb SP 450 o F

Fig Non-Return Valves. Selected Lunkenheimer Boiler Mountings. Cast Iron. 250 lb SP 450 o F Fig. 1408 Non-Return Valves 250 lb SP 450 o F Cast Iron non-return valves cut out a boiler automatically when inside pressure drops suddenly or when heat is withdrawn. External spring is reversed and valve

More information

Cryogenic Service Applications. Cryogenic Service Applications. Cryogenic Service Valves

Cryogenic Service Applications. Cryogenic Service Applications. Cryogenic Service Valves Cryogenic Service Applications Valves are used with cryogens from production through transportation and storage which serve many industries with gases such as oxygen, nitrogen, argon and more. At extremely

More information

RMF Engineering 23 05 23

RMF Engineering 23 05 23 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

NEWCO VALVES Newmans Inc., Newmans Valve Ltd. NEWCO/OIC Cast Valve Operation & Maintenance Manual

NEWCO VALVES Newmans Inc., Newmans Valve Ltd. NEWCO/OIC Cast Valve Operation & Maintenance Manual NEWCO VALVES Newmans Inc., Newmans Valve Ltd. NEWCO/OIC Cast Valve Operation & Maintenance Manual TABLE OF CONTENTS 1. Introduction and Safety Information... 1 1.1. Introduction... 1 1.2. Safety Information...

More information

GATE VALVES. Overview... 10

GATE VALVES. Overview... 10 Overview... 0 olted onnet ate- 800 lb. & 0 lb. valves... olted onnet ate- 0 lb. & 0 lb. valves... Welded onnet ate- 800 lb. & 0 lb. valves... 3 Welded onnet ate- 0 lb. & 40 lb. valves... 4 TE VLVES 9 OVERVIEW

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

Self Operated Pressure Control Valves 5953 and 5954

Self Operated Pressure Control Valves 5953 and 5954 Pagina 1 di 8 7C.400-E Ed. 6 IT - 2010 Self Operated Pressure Control Valves 5953 and 5954 Description Fluxotrol self operated pressure control valves are used for the pressure control of liquids, steam

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

DIN Gate Valves.

DIN Gate Valves. DIN Gate Valves www.siekmann-econosto.com Supplies, Services, Solutions. SIEKMANN ECONOSTO Supplies, Services, Solutions. Siekmann Econosto is more than just a traditional supplier. We provide solutions

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY CATALOGUE 2012 - PART 4 CHEMICAL BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY PLUG VALVES SLEEVED PLUG VALVES FULLY LINED

More information

SERIES C CRYOGENIC BALL VALVES

SERIES C CRYOGENIC BALL VALVES SERIES C CRYOGENIC BALL VALVES SHARPE HIGH PERFORMANCE CRYOGENIC BALL VALVES Sharpe Cryogenic Series Ball Valves offer as standard features advantages that other valve manufacturers offer only as costly

More information

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve.

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve. INOX-VAL SERIES 70000 STAINLESS STEEL BALL VALVE pc stainless steel ASTM A35 - CF8M ball valve. psi TUV T.A.Luft approved. COMPLIES WITH NACE MR 075, NACE MR 003 AND ISO 55 AVAILABLE FIRE SAFE APPROVED

More information

D I S T R I B U T E D V A L V E S TBV. Series 2100 Cryogenic Ball Valve TBV

D I S T R I B U T E D V A L V E S TBV. Series 2100 Cryogenic Ball Valve TBV TBV Series 2100 Cryogenic Ball Valve SERIES 2100 CRYOGENIC BALL VALVE The TBV 2100 Series Cryogenic Valve is designed and engineered by a staff that is experienced in cryogenic applications. It utilizes

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses

12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast

More information

Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL

Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Corporation 3245 S. Hattie Oklahoma City, Oklahoma 73129 Telephone: (405) 677-3321 Fax: (405) 677-3917 Email:Balon@balon.com

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

NEWCO Valves. Complete line of cast, forged and stainless steel gate, globe and check valves in a full range of sizes and classes

NEWCO Valves. Complete line of cast, forged and stainless steel gate, globe and check valves in a full range of sizes and classes NEWCO Valves Complete line of cast, forged and stainless steel gate, globe and check valves in a full range of sizes and classes Cast Steel Gate, Globe and Check Valves Cameron s NEWCO cast steel gate,

More information

Flanged and Butt-= Weld Type

Flanged and Butt-= Weld Type Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design

More information

Ductile Iron and Cast Iron Gate Valves

Ductile Iron and Cast Iron Gate Valves SETION b uctile Iron and ast Iron Gate Valves Tel: + ()195 71 Fax: + ()195 71 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents uctile Iron and ast Iron Gate Valves ontents Page

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22

Vogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed

More information

Cast Iron Valves. JIS 5K/10K, Class 125

Cast Iron Valves. JIS 5K/10K, Class 125 Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI

More information

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING

More information

3-PIECE FULL PORT SERIES V84 3-PIECE STANDARD PORT 3-PIECE HIGH PRESSURE CONTROL VALVE

3-PIECE FULL PORT SERIES V84 3-PIECE STANDARD PORT 3-PIECE HIGH PRESSURE CONTROL VALVE SERIES 84 Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass NPT, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* 3-PIECE

More information

Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry

Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 +SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -

More information

MUELLER A-20806/A ADJUSTABLE VERTICAL INDICATOR POST

MUELLER A-20806/A ADJUSTABLE VERTICAL INDICATOR POST INSTALLATION INSTRUCTIONS MUELLER A-20806/A-20807 STARTING YEAR DATE 2011 GENERAL DESCRIPTION Vertical Indicator Posts (Ref. Figure A) are designed to operate non-rising stem (inside screw) gate valves,

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

The Complete Catalog. COOPER Valves 4659 Wright Road Stafford, Texas 77477, USA v090314

The Complete Catalog. COOPER Valves 4659 Wright Road Stafford, Texas 77477, USA v090314 The Complete Catalog COOPER Valves 659 Wright Road Stafford, Texas 7777, USA www.coopervalves.com v09031 Table of Contents COOPER Valves Company Information...3 Our History... 3 Our Mission Statement...3

More information

Worldwide Contacts.

Worldwide Contacts. Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.

More information

Cryogenic applications

Cryogenic applications Products catalogue Transformers for Cryogenic applications General Chemicals Fine Chemicals Petrochemicals Plastics and Polymers Nuclear and Navy Other applications Leading Valves Manufacturer GUICHON

More information

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

Cryogenic Service Valves. Valve Specialists. Gate, Globe & Ball ISO since 1990 CATALOG C-CR01

Cryogenic Service Valves. Valve Specialists. Gate, Globe & Ball ISO since 1990 CATALOG C-CR01 Cryogenic Service Valves Valve Specialists Gate, Globe & Ball ISO 9001 since 1990 C-CR01 CATALOG INNOVATION 1998 was the year OMBspa celebrated it s 25th Anniversary Simone Brevi and Roberto Brevi Managing

More information

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS

PLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS 8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263

More information

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control

More information

Cast Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design

Cast Carbon and Low Alloy Steel Valves. ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet Design Cast Carbon and Low Alloy Steel Valves ASME Class 150/300/600/900/1500/2500 Gate, Globe and Check Valves, Bolted Bonnet esign INEX Profile of KITZ Cast Steel Valves...1 Standard Product Range...2 Standard

More information

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes

More information

The Solution For The Valve Problems Plug Valves

The Solution For The Valve Problems Plug Valves www.3zvalve.com The Solution For The Valve Problems Plug Valves Good Company and Strong Company Customer Satisfaction Closely working and continuously communicating with our customers, the people at 3Z

More information

QLM and QLD Series Three-port Control Valves

QLM and QLD Series Three-port Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

L&T CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class 150-2500. 50mm - 1600mm (2-64 ) API 600 BS 1873 BS 1868 ASME B16.34

L&T CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class 150-2500. 50mm - 1600mm (2-64 ) API 600 BS 1873 BS 1868 ASME B16.34 L&T CAST STEEL GATE, GLOBE & CHECK VALVES ASME Class 150-2500 50mm - 1600mm (2-64 ) API 600 BS 1873 BS 1868 ASME B16.34 Introduction L&T Cast Steel Gate, Globe and Check Valves have established themselves

More information

Technical Manual. Register 18 Contents - T4E

Technical Manual. Register 18 Contents - T4E Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5

More information

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves BS EN ISO 9001 0086 as FM 00707 Worcester Controls Cryogenic 3-Piece Ball Valves Cryogenic Valve Design Worcester's experience and expertise in the design of cryogenic ball valves has been recognised throughout

More information

Valves, Automation & Controls C80 /C89 & C70 /C74 CRYOGENIC SERIES VALVES. HIGH PERFORMANCE BALL VALVE for extreme low temperature applications

Valves, Automation & Controls C80 /C89 & C70 /C74 CRYOGENIC SERIES VALVES. HIGH PERFORMANCE BALL VALVE for extreme low temperature applications Valves, Automation & Controls C80 /C89 & C0 /C CRYOGENIC SERIES VALVES HIGH PERFORMANCE BALL VALVE for extreme low temperature applications SERIES C80/C89 & C0/C Valves, Automation & Controls Integral

More information

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Page 1 of 8 TI-P357-30 CH Issue 8 PN9000 Series Pneumatic s for SPIRA-TROL K and L Series Control Valves Description The PN9000 series actuators are a compact of linear actuators that are available in

More information

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and

More information

Installation, Operation, and Maintenance Manual. Gate, Globe, and Check Valves

Installation, Operation, and Maintenance Manual. Gate, Globe, and Check Valves SMITH VALVES Installation, Operation, and Maintenance Manual Gate, Globe, and Check Valves TNC Doc EDC 303, Revision 4, Issued April 2011 TABLE OF CONTENTS 1.0 - GENERAL 2.0 - INSTALLATION 3.0 - OPERATION

More information

A. The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date.

A. The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date. SECTION 23 22 13 STEAM AND STEAM CONDENSATE PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

Cast Steel, Bolted Bonnet Gate, Globe & Check

Cast Steel, Bolted Bonnet Gate, Globe & Check 6 5 4 Cast Steel, Bolted Bonnet Gate, Globe & Check DISC NUT Tack We SECTION F-F SCALE 1 : 4 F-14 -ISO 5210 Mounting Flange DETAIL B "Disc Nut retention to Disc " DISC 18.0 457 21 20 eld 10 F F C G 4 17

More information

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA 1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With

More information

Page Series Type Material Pressure

Page Series Type Material Pressure Table of Contents Page Series Type Material Pressure DIN Gates 3 1001 NRS Cast Iron PN10 4 1011-1012 NRS Cast Steel PN16 5 1022 NRS Bronze PN16 6 1032 NRS Ductile Iron PN16 7 1202 NRS Cast Iron PN16 8

More information

Valve Terminology Glossary

Valve Terminology Glossary Valve Terminology Glossary Courtesy of Zy-Tech Industries Actuator Device used to operate a valve using electric, pneumatic or hydraulic means. Often used for remote control or sequencing of valve operations.

More information

Armstrong Python Series 1100 Control Valve Installation and Maintenance

Armstrong Python Series 1100 Control Valve Installation and Maintenance This bulletin should be used by experienced personnel as a guide to the installation and maintenance of the Armstrong Python Control Valve. Selection or installation of equipment should always be accompanied

More information

MILLCENTRIC OPERATION & MAINTENANCE MANUAL SERIES 600

MILLCENTRIC OPERATION & MAINTENANCE MANUAL SERIES 600 FEBRUARY 2000 MILLCENTRIC OPERATION & MAINTENANCE MANUAL SERIES 600 MILLIKEN VALVE COMPANY 1995 HIGLAND AVENUE, SUITE 500 BETHLEHEM PA 18020 PHONE: (610) 861-8803 FAX: (610) 861-8094 ========================================

More information

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS INSTALLATION AND OPERATION MANUAL FOR WORM GEAR ACTUATORS Thank you for purchasing our SBWG Worm Gear Actuator. Before installing or operating actuator, please carefully read this manual. The contents

More information

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE Valves, Automation & Controls SERIES 7 HIGH PERFORANCE FLANGED STANDARD PORT BALL VALVE Fully Compliant API 608 5th Edition 50 300 FOR REFINING, CHEICAL & PETROCHEICAL PROCESSING Added Features Enhanced

More information

CRYOGENIC AND LOW TEMPERATURE SERVICE TRIAD SERIES BALL VALVES INSTALLATION - MAINTENANCE MANUAL

CRYOGENIC AND LOW TEMPERATURE SERVICE TRIAD SERIES BALL VALVES INSTALLATION - MAINTENANCE MANUAL Date: August 2011 / Page 1 of 6 CRYOGENIC AND LOW TEMPERATURE SERVICE TRIAD SERIES BALL VALVES (FP2000/FP3000 and SP2000/SP3000 WITH CRYO OR LOW TEMP EXTENSION) INSTALLATION - MAINTENANCE MANUAL DESIGN

More information

Bestobell Valves. Product Catalogue

Bestobell Valves. Product Catalogue Bestobell Valves Product Catalogue 2015-2016 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Company Background Bestobell

More information

D I S T R I B U T E D V A L V E S. TBV Series 21/18 Cryogenic Flanged Ball Valve TBV

D I S T R I B U T E D V A L V E S. TBV Series 21/18 Cryogenic Flanged Ball Valve TBV TM TBV Series 21/18 Cryogenic Flanged Ball Valve The TBV Series 21/18 Two-Piece, Standard or Full Port, Flanged, Cryogenic Ball Valve is specifically designed for cryogenic applications. The Series 21/18

More information

Series 3250 Globe Control Valve Type 3251 Pneumatic Control Valves Type 3251/3271 and Type 3251/3277

Series 3250 Globe Control Valve Type 3251 Pneumatic Control Valves Type 3251/3271 and Type 3251/3277 Series 350 Globe Control Valve Type 35 Pneumatic Control Valves Type 35/37 and Type 35/377 Application Control valve for process engineering applications with high industrial requirements. s ½ 8 (5 00

More information

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700 SAPAG Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Features Thermal expansion, to API 520 Certified to ASME VIII for air and steam Gas, Steam and Liquid service Integral nozzle -

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves THAT SQUALITY The Best Guarantee of Safety Perar Ball Valves, One of the first... since 1962 Founded in 1962, Perar is one of the first Italian Manufacturers of High Quality

More information

SECTION STEAM AND STEAM CONDENSATE PIPING AND VALVES. B. ANSI/ASME B Malleable Iron Threaded Fittings Class 150 and 300.

SECTION STEAM AND STEAM CONDENSATE PIPING AND VALVES. B. ANSI/ASME B Malleable Iron Threaded Fittings Class 150 and 300. SECTION 15520 STEAM AND STEAM CONDENSATE PIPING AND VALVES PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Pipe and pipe fittings. B. Valves. 1.2 REFERENCES A. ANSI/ASME SEC IX - Welding and Brazing Qualifications.

More information

Mueller B-101 and A-3 Drilling and Tapping Machines

Mueller B-101 and A-3 Drilling and Tapping Machines TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology

More information

1900/P Series. Consolidated * Valves. Safety Relief Valve

1900/P Series. Consolidated * Valves. Safety Relief Valve GE Oil & Gas Technical Specifications 11/2014 Consolidated * s 1900/P Series Safety Relief The 1900/P Safety Relief is designed to be highly adaptable to meet numberous application requirements. Table

More information

VALVES SANS 664:1999. Technical Catalogue. Gate Valves. Fire Hydrants. Check Valves. Air Valves. For Use In. Water Supply.

VALVES SANS 664:1999. Technical Catalogue. Gate Valves. Fire Hydrants. Check Valves. Air Valves. For Use In. Water Supply. VALVES Technical Catalogue Gate Valves Fire Hydrants Check Valves Air Valves For Use In Water Supply Sewage Treatment Fire Fighting Gas Supply WORLD LEADERS IN VALVE TECHNOLOGY PROUDLY DISTRIBUTED BY DPI

More information

GATE, GLOBE, CHECK, BUTTERFLY AND NEEDLE VALVES SPECIFICATION

GATE, GLOBE, CHECK, BUTTERFLY AND NEEDLE VALVES SPECIFICATION DOCUMENT NO: GATE, GLOBE, CHECK, BUTTERFLY AND NEEDLE VALVES SPECIFICATION Prepared By: Chevron Niugini Project Services Limited 2 28 Feb 02 Approved for Purchase SAC MGB PRW PRW LRF 1 01 May 01 Approved

More information

Cast Steel Bolted Bonnet Angle Stop Check Valves Sizes: 2 thru 12 Pressure Class: 150 thru 600

Cast Steel Bolted Bonnet Angle Stop Check Valves Sizes: 2 thru 12 Pressure Class: 150 thru 600 ast Steel olted onnet ngle Stop heck Valves s: 2 thru 12 Pressure lass: 150 thru 600 Manufactured by Newmans 53 Newco ast arbon Steel olted onnet Valves Product Line Technical ata Typical Newco ast Steel

More information

B&G Circuit Setter RF Balancing Valves

B&G Circuit Setter RF Balancing Valves B&G Circuit Setter RF Balancing Valves THE RF CIRCUIT SETTER BALANCING VALVES ARE FOR LOW-FLOW APPLICATIONS This Bell & Gossett valve is a triple-purpose balancing instrument with standard sweat (copper)

More information

TABLE OF CONTENTS. Standard Valves... Standard Features... Flow Coefficient... GATE Valves... GLOBE Valves... CHECK Valves...

TABLE OF CONTENTS. Standard Valves... Standard Features... Flow Coefficient... GATE Valves... GLOBE Valves... CHECK Valves... FORGED STEEL VALVES TABLE OF CONTENTS Standard Valves... Standard Features... Flow Coefficient... GATE Valves... GLOBE Valves... CHECK Valves... Pressure Temperature Ratings... Flanges: DIN & ANSI... End

More information

MET-PRO DEAN PUMP SERIES RA P A K D A T A. Global Pump Solutions. Fan Cooled Hot Oil Pumps. Section RA

MET-PRO DEAN PUMP SERIES RA P A K D A T A. Global Pump Solutions. Fan Cooled Hot Oil Pumps. Section RA A Met-Pro Fluid Handling Technologies Business Combining the Resources of Dean Pump, Fybroc & Sethco DEAN PUMP SERIES RA Fan Cooled Hot Oil Pumps D A T A P A K Section RA SERIES RA FAN COOLED HOT OIL PUMPS

More information

Baumann 24000 Little Scotty Bronze Control Valve

Baumann 24000 Little Scotty Bronze Control Valve 24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature

More information

Large bore valves. Powergeneration / petrochemical industries. Medium & high-pressure valves in accordance with ASME, EN, BS and API

Large bore valves. Powergeneration / petrochemical industries. Medium & high-pressure valves in accordance with ASME, EN, BS and API Large bore valves Powergeneration / petrochemical industries Medium & high-pressure valves in accordance with ASME, EN, BS and API An introduction to Key Valve Technologies Ltd. Key Valve Technologies

More information

L&T FORGED STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm - 50mm (1/4-2 ) API 602 BS 5352 BS 6364 ASME B16.

L&T FORGED STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm - 50mm (1/4-2 ) API 602 BS 5352 BS 6364 ASME B16. L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) API 602 S 5352 S 6364 ASME 16.34 MSS SP 84 L&T Valves Limited is a wholly owned subsidiary of Larsen & Toubro. acked by an fif

More information

CONSULTANT PROCEDURES & DESIGN GUIDELINES Steam and Condensate Piping and Pump Systems

CONSULTANT PROCEDURES & DESIGN GUIDELINES Steam and Condensate Piping and Pump Systems GENERAL: Steam and condensate piping and pump systems included in this document are for building systems starting at the pressure reducing station (PRV). DESIGN GUIDELINES: A. Design General 1. Definitions:

More information

3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide

3, 4, 6 & 8 Model H Series Alarm Check Valve Installation and Maintenance Guide ", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,

More information

Series 250 Pneumatic Control Valve Type and Type Globe Valve Type 3254

Series 250 Pneumatic Control Valve Type and Type Globe Valve Type 3254 Series Pneumatic Control Valve Type 3254-1 and Type 3254-7 Globe Valve Type 3254 Application Control valve for process engineering applications with high industrial requirements, especially for high pressures

More information

Integral Block & Bleed Valves. High Technology Valve & Fitting Series

Integral Block & Bleed Valves. High Technology Valve & Fitting Series Integral Block & Bleed Valves High Technology Valve & Fitting Series SUPERLOK instrumentation products has the ultimate solutions for a compact range of one-piece forged body integral block & bleed valves,

More information

PLUMBING RE-SUBMITTAL 22 11 17

PLUMBING RE-SUBMITTAL 22 11 17 PLUMBING RE-SUBMITTAL 22 11 17 ACADEMIC BUILDING & PATRIOT S CASA TEXAS A&M UNIVERSITY - SAN ANTONIO, TX NO. 25-3122, VAC NO. 39019 OWNER: ARCHITECT: MEP ENGINEER: GENERAL CONTRACTOR: PLUMBING CONTRACTOR:

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

1000 WOG BALL VALVE Stainless Steel 1-pc body, PTFE seat Reduced Bore, Screwed BSPT

1000 WOG BALL VALVE Stainless Steel 1-pc body, PTFE seat Reduced Bore, Screwed BSPT 1000 WOG BALL VALVE Stainless Steel 1-pc body, PTFE seat Reduced Bore, Screwed BSPT Rating Media Water, Oil, Gas Nominal Pressure (PN) 63 kgf/cm² Temperature Normal 120 C Test Pressure: Body 1200 psi (Hydrostatic)

More information