4. Vane Motors. Vane Motors 4-1. Maximum Operating pressure (bar) Maximum Displacement (ml/rev.) Weight. Mounting. Series. (Kg)

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "4. Vane Motors. Vane Motors 4-1. Maximum Operating pressure (bar) Maximum Displacement (ml/rev.) Weight. Mounting. Series. (Kg)"

Transcription

1 Vane Motors 4. Vane Motors Maximum Operating pressure (bar) Maximum Displacement (ml/rev.) Mounting Weight (Kg) Remarks Page M5F Special (Fan Drive) 17.5 Fan drive Optional braking valve 4-4 M5 M5F ISO /2 SE- Special (Fan Drive) 18.5 Optional braking valve M5 : ISO /2 mtg. M5S : SE mounting M5F : Fan Drive version 4-4 M4C / M4SC 175 / SE- 2 bolts 15.4 M4C : standard M4SC : heavy duty Rear ports Side ports same side Side ports opposite side (option) 4-6 M4D / M4SD 175 / SE-C 2/6 bolts 27.0 M4D : standard M4SD : heavy duty Rear ports 4-6 M4E / M4SE 175 / SE-C 2/6 bolts 45.0 M4E : standard M4SE : heavy duty Rear ports 4-6 M SE- 2 bolts 8.0 Side ports 4-8 Performance Curves...Consult technical literature DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

2 Vane Motors - Product Range Overview Displacement Range (ml/rev) M5F 6 25 M5 M5F M4C M4SC M4D M4SD M4E M4SE M DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

3 Vane Motors - Performance & Operation Limits Performance & Operation Limits Size Displ. Torque Maximum Pressure Maximum Speed rpm Standard S series Case Rated pressure Low pressure Cont. Int. Standard S series Size ml/rev. N.m / bar kw / bar bar bar bar rpm rpm rpm rpm M5F M5 M5F M4C M4SC M4D M4SD M4E M4SE M / / / / / bar) 80 bar) bar) 80 bar) bar) 80 bar) bar) Minimum Replenishment Pressure (bar absolute) 2 Speed (RPM), fluid : 32 cst M M M4C M4D M4E M Mineral Oil. Other fluids, consult Denison Hydraulics. 2 Mineral Oil. Fire resistant fluid : value x DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

4 Vane Motors M5 M5F, M5(S), M5F 45 ml/rev, 320 bar Key Sheet :... Example : M N02-1M3 1. M N02-1M3... Mounting ISO SE External M5 M5S 2. M N02-1M3... Displacement (ml/rev.) Code M N02-1M3...Shaft 4. M N02-1M3...Rotation i-directional 5. M N02-1M3...Porting 6. M N02-1M3...Design 7. M N02-1M3...Seal Class una N : huiles minérales 1 8. M N02-1M3...Ports N & ports : ¾ SE - 4 bolts & UNC 3 / 8-16 UNC Metric M10 9 / 16 SE M18 Code M3 M5 - - M5S Key Sheet...Example : M5F-028-1N02-1M3 1. M5F-028-1N02-1M3... External M5F M5F Internal - M5F1 2. M5F-028-1N02-1M3...Displacement (ml/rev.) M5F M5F M5F-028-1N02-1M3... Shaft 4. M5F-028-1N02-1M3... Rotation Integrated braking valve i-directional CW CCW N R L 5. M5F-028-1N02-1M3... Porting 6. M5F-028-1N02-1M3...Design 7. M5F-028-1N02-1M3... Seal Class (una N) 8. M5F-028-1N02-1M3... Ports M5F M5F & ports : ¾ SE - 4 bolts & UNC 3 / 8-16 UNC Metric M10 9 / 16 SE M18 None Code M3 MX - M5F Porting... (M N02-1M3) Code DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

5 Vane Motors - M5 M5 M5S Inlet Outlet R (CW) L (CCW) C : 9 / 16 -SE D 03 / M3 : M18 E F G I M N 92.0 O P T1 02 / 03 : 3 / 8-16UNC M3 : M10 Shaft M5 M5S L1 L2 Diameter K1 x K2 H1 1 Keyed SE- ( 22.2) x Keyed ISO R775 ( 25) Splined SE Class 1 - J498b 16/32 d.p teeth Shaft rotation Inlet Outlet M5F / M5F M5F1 / M5FI (R/N) CW (L/N) CCW M5F1 + relief (R) CW (R) CW (L) CCW M5F C M5F D 02 : 9/16 SE 03 / M3 : M18 E F G 92.0 I M N O P T1 02 / 03 : 3 /8-16 UNC M3 / MX : M10 R 4.0 Shaft M5F M5F L1 L2 Diameter K1 x K2 H1 1 Keyed SE- (taper + key) : M x R = 4.0 Keyed SE- (taper, no key) : M R = Keyed SE-C ( 31) x M1 = M10x20 3 Keyed ISO 3019/2 G32N x M1 = M10x DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

6 Vane Motors M4 M4 M4C ml/rev, 230 bar M4D ml/rev, 210 bar M4E ml/rev, 190 bar Key Sheet... Example : M4C-067-1N M4C-067-1N M4C-067-1N Rotation External drain Internal drain Standard S series (heavy duty) M4C M4D M4E M4SC M4SD M4SE M4C1 M4D1 M4E1 M4SC1 M4SD1 M4SE1 2. M4C-067-1N Displacement M4C / M4SC M4D / M4SD M4E / M4SE M4C-067-1N Shaft i-directional 5. M4C-067-1N Porting 6. M4C-067-1N Design 7. M4C-067-1N Seal Class M4 una N : Mineral oil 1 - N M4S Viton : Mineral oil & fire resistant fluids M4C-067-1N Port connections SE SE 4 bolts threaded UNC Metric SE drain SPP drain - 04 M4 M4C / M4SC M4D / M4SD M4E / M4SE - Porting...(M4C-067-1N00-102) Code Rear M4C / M4SC M4D / M4SD M4E / M4SE Side 4-6 DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

7 Vane Motors - M4 Inlet Outlet R (CW) L (CCW) M4C E F G H 62.0 I O P 14.2 Q M4D E F H M N R 17.5 S U M4E E F H M N R 17.5 S U Shaft Dimensions M4C M4D M4E L1 L2 Diameter K1 x K2 H1 Keyed SE- ( 22.2) x Keyed SE-C ( 31.7) x Keyed SE-C ( 31.7) x Keyed non SE ( 22.2) x Splined SE Class 1 - J498b 16/32 d.p teeth 3 Splined SE-C Class 1 - J498b 12/24 d.p teeth Splined SE-C Class 1 - J498b 12/24 d.p teeth Ports M4C / M4SC M4D / M4SD SE 4 bolts flanges ports (option : 02, 04, M4) & 1 1 C1 Thread T1 SE : 3 / 8 16 UNC x 19.0 Metric : M10 x 20.0 SE : 7 / UNC x 22.0 Metric : M12 x 22.1 Dimensions (mm) SE threaded ports (option 01) 1 5 / 16 UNF x / 8 16 UNF x 19.0 M4E / M4SE ½ 13 UNC x ½ 12 UNF x 19.0 port D SE : 7 / UNF SPP : ¼ SE : ¾ 16 UNF SPP : 3 / 8 SE : ¾ 16 UNF SPP : ½ 4-7 DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

8 Vane Motors M3 M ml/rev, 210 bar Key sheet... Example : M N M N External drain Internal drain Standard M3 M31 2. M N Displacement M ml/rev ml/rev ml/rev ml/rev ml/rev 3. M N Shaft 4. M N Rotation i-directional N 5. M N Porting & ports : opposite side 00 & ports : same side (above picture) M N Design 7. M N Seal class una N : Mineral oil 1 Viton : Mineral oil & fire resistant fluids 5 8. M N Port connection & Ports SE Threaded SPP SE 4 bolts UNC thread SE SPP M3 CW CCW : inlet in : Inlet in E 33.3 F 92.0 G N O P 11.1 Shaft Dimensions (mm) L1 L2 Diameter K1 x K2 H1 1 Keyed non SE ( 22.2) x Splined SE Class 1 - J498b 16/32 d.p. - 9 teeth 4 Splined SE Class 1 - J498b 16/32 d.p teeth & Ports SE 4 bolts flanges ports Option 01 Threaded ports Port Dimensions 1 1 C1 D1 Thread T1 Option 00 (SE) Option 02 (SPP) SE SPP (mm) / 8 16 UNC x / 16 UNF x 19.0 ¾ x / UNF 3 / DENISON HYDRULICS - Ref. : 04 - EN-VM004-G3

DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF

DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF Back to Content DENISON HYDRAULICS high performance hydraulic new vane motor series M5B - M5BS - M5BF Publ. 2 - EN1702 - A 01 / 99 / 2500 / FB Replaces : CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12

More information

DENISON HYDRAULICS vane motors single & double M3B - M4 / M4S series

DENISON HYDRAULICS vane motors single & double M3B - M4 / M4S series DENISON HYDRAULICS vane motors single & double M3B - M4 / M4S series Publ. 2 - EN1700 - A 01 / 02 / 3000 / FB Replace : 2 - EN 157 - B L13-21700 - 1 CONTENTS - M3* AND M4* SERIES GENERAL General characteristics...

More information

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC Publ. 1 - EN0709 - A 01 / 2000 / 2500 / FB Replaces : 1 - EN 084 - B L25-10709 - 1 CONTENTS GENERAL CHARACTERISTICS T67GB T6GC - T6ZC T67GB

More information

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.

SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of

More information

MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G

MOTORS M HYDRAULIC MOTORS T E C H N I C A L C A T A L O G MOTORS M HYDRULIC MOTORS T E C H N I C L C T L O G Fixed displaced axial piston motors POCLIN HYDRULICS Displacement cm³/rev [in³/rev.] M M1 M2 M3 From 7,7 [.43] to 17,84 [1.9] From 9,8 [.55] to 2,31 [1.24]

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES

FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained

More information

High Speed Hydraulic Motors. Catalog HY /NA

High Speed Hydraulic Motors. Catalog HY /NA High Speed Hydraulic Motors Catalog HY13-20-0-001/NA 341 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range of

More information

Commercial Shearing (Pty) Ltd P3-P11-P17

Commercial Shearing (Pty) Ltd P3-P11-P17 Commercial Shearing (Pty) Ltd P3-P11-P17 HYDRAULIC PUMPS P3 HYDRAULIC PUMPS Superior Performance. High Efficiency. High Pressure Operation. The Advantage At One Glance UP TO 4000 PSI/276 BAR CONTINUOUS

More information

Mobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement

Mobile Hydraulic Pumps T6*M. Denison Vane Technology, fixed displacement Mobile Hydraulic Pumps T6*M Denison Vane Technology, fixed displacement Contents GENERAL Series T6 Mobile, Denison Vane Pumps Features...3 Instructions...3 Minimum & maximum speeds...4 Pressure ratings...4

More information

Piston Pumps. PVE Piston Pumps. Vickers

Piston Pumps. PVE Piston Pumps. Vickers Vickers Piston Pumps PVE Piston Pumps PVE12 Variable Displacement Single Pump PVE19 / PVE21 Variable Displacement Single & Thru-Drive Pumps PVE4* 25V Integrated Models GB C 223 A.1 Table of Contents Introduction.................................................................................................

More information

HIGH PRESSURE GEAR PUMP W1500

HIGH PRESSURE GEAR PUMP W1500 HIGH PRESSURE GEAR PUMP W1500 HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide THE POWER OF THE W1500 A SERIES Haldex Hydraulics is one of the world s leading

More information

HIGH PRESSURE GEAR PUMP W300

HIGH PRESSURE GEAR PUMP W300 HIGH PRESSURE GEAR PUMP W00 Concentric AB Innovation in Hydraulics THE POWER OF THE W00 B SERIES Concentric is one of the world s leading manufacturers of hydraulic pumps. Our focus on important strategic

More information

IFP SINGLE VANE PUMPS V10/V20 - V210/V230

IFP SINGLE VANE PUMPS V10/V20 - V210/V230 IFP SINGLE VANE PUMPS V10/V20 - V210/V230 * High Performance * Low Cost * Extended Life * Versatile * Compact * Quiet Operation * Balanced Cartridge Design C:\Program Files\ACAD2000\CATELOG\NDcatalogue\pictures\V10&V20.bmp

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, 02 T A Replaces: MVP 01 T A Modification from former edition Variable displacement axial piston pumps, DISPLACEMENTS From To 2.75 in 3 /rev (45 cm 3 /rev) 5.12 in 3 /rev (84 cm 3 /rev) for open circuit

More information

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m

ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4

More information

OMP, OMR, OMH and OMEW Hydraulic Motor A wide range of hydraulic motors

OMP, OMR, OMH and OMEW Hydraulic Motor A wide range of hydraulic motors , OMR, OMH and OMEW A wide range of hydraulic motors Motorer.TIF A WIDE RANGE OF HYDRAULIC MOTORS Sauer-Danfoss is a world leader within production of low speed hydraulic motors with high torque. We can

More information

HPV SERIES AXIAL PISTON PUMPS

HPV SERIES AXIAL PISTON PUMPS INDEX COMPENSATED VOLUMETRIC THEORETICAL FLOW@ MODEL MAXIMUM CONTINUOUS FLANGE PAGES DISPLACEMENT 17 RPM SERIES MOUNTING.88 CU. IN./REV. 6.67 GPM HPV-6B35 30 PSI SAE A 2-BOLT* 9-15 1.26 CU. IN./REV. 9.55

More information

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits with housing and distributor cover in aluminium. The displacement is continuously variable by means

More information

PowrFlow HPV Series Axial Piston Pumps

PowrFlow HPV Series Axial Piston Pumps PowrFlow HPV Series Axial Piston Pumps HPV SERIES AXIAL PISTON PUMPS RELIABLE POWER FOR ANY HYDRAULIC SYSTEM Product Description What Makes PowrFlow HPV Series Axial Piston Pumps Your Best Buy? Variable

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

Displacements cm 3 /r [in 3 /r] Design code -002 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Char-Lynn HP30 Motor

Displacements cm 3 /r [in 3 /r] Design code -002 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Char-Lynn HP30 Motor Char-Lynn HP30 Motor Design code -002 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for Performance For the past 55 years, Char-Lynn has been recognized

More information

Variable Displacement Pump AA10VSO

Variable Displacement Pump AA10VSO Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi

More information

Series PVP Variable Volume Piston Pumps

Series PVP Variable Volume Piston Pumps Series PVP Variable Volume Piston Pumps Catalog HY28-2662-CD/US Revised June, 212 hpm12-1.p65, lw, jk 1 Notes Series PVP hpm12-1.p65, lw, jk 2 Introduction Series PVP Series Sizes 6-14 Phased Out For Reference

More information

HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION. Outstanding Hydraulic Products, Service and Expertise, Worldwide

HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION. Outstanding Hydraulic Products, Service and Expertise, Worldwide HYDRAULIC MOTORS HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide Introduction to Haldex Hydraulic Motor Capability Haldex offers one of the widest selections

More information

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division

Hydraulic Pump/Motor Division Hydraulic Pump/Motor Division Parker Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000 RPM PV Plus : 12

More information

VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications

VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact

More information

H1 Axial Piston Pump, Size 078, Single Technical Information Dimensions

H1 Axial Piston Pump, Size 078, Single Technical Information Dimensions Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24

More information

A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711

A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711 A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.

More information

2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7

2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7 Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables

More information

IFP A10VSO VARIABLE AXIAL PISTON PUMPS. Available sizes: NOMINAL PRESSURE 4000 psi [280 bar] PEAK PRESSURE 5100 psi [350 bar] FEATURES SECTIONAL VIEW

IFP A10VSO VARIABLE AXIAL PISTON PUMPS. Available sizes: NOMINAL PRESSURE 4000 psi [280 bar] PEAK PRESSURE 5100 psi [350 bar] FEATURES SECTIONAL VIEW IFP A10VSO VARIABLE AXIAL PISTON PUMPS Available sizes: 18 1.10 in3/rev [18 cm3/rev] 28 1.71 in3/rev [28 cm3/rev] 45 2.75 in3/rev [45 cm3/rev] 71 4.33 in3/rev [71 cm3/rev] 100 6.10 in3/rev [100 cm3/rev]

More information

SNM2 SEM2 Gear Motors Technical Information

SNM2 SEM2 Gear Motors Technical Information SNM2 SEM2 Gear Motors Technical Information Gear Pumps and Motors General Products Sauer-Sundstrand Gear Pump and Motor Features Worldwide sales and service capabilities from the industry leader is part

More information

OML and OMM Orbital motors. Technical Information

OML and OMM Orbital motors. Technical Information and OMM Orbital motors Technical Information and OMM A wide range of orbital motors F300030.TIF A WIDE RANGE OF ORBITAL MOTORS Sauer-Danfoss is a world leader within production of low speed orbital motors

More information

VHO/VQ Single, Double & Triple Vane Pumps

VHO/VQ Single, Double & Triple Vane Pumps VHO/VQ Single, Double & Triple Vane Pumps Series Available: 20, 25, 30, 35, 45, 50 For Mobile and Industrial Use Cartridge Kits Available for All Sizes Same Day Shipments www.fluidynefp.com Our People

More information

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Variable Displacement Catalog HY28-2665-01/P1/EN Effective: March 15,

More information

Series TMM Axial Piston Motor. Technical Information

Series TMM Axial Piston Motor. Technical Information Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5

More information

P2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US

P2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston

More information

bar clockwise or anticlockwise (looking at the drive shaft) Hydraulic connection SAE flange fittings (see paragraph 24)

bar clockwise or anticlockwise (looking at the drive shaft) Hydraulic connection SAE flange fittings (see paragraph 24) 16 100/112 ED VPPM VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS OPERATING PRINCIPLE The VPPM pumps are variable displacement axial-piston pumps with variable swash plate, suitable for applications with open

More information

HIGH PRESSURE GEAR PUMP WQ900 SUPER QUIET & LOW PULSATION

HIGH PRESSURE GEAR PUMP WQ900 SUPER QUIET & LOW PULSATION HIGH PRESSURE GEAR PUMP WQ0 SUPER QUIET & LOW PULSATION Concentric AB Innovation in Hydraulics THE POWER OF THE WQ0 A SERIES Concentric is one of the world s leading manufacturers of hydraulic pumps. In

More information

HYDRAULIC MOTORS Concentric AB

HYDRAULIC MOTORS Concentric AB HYDRAULIC MOTORS Concentric A Innovation in Hydraulics Introduction to Concentric Hydraulic Motor Capability Concentric offers one of the widest selections of gear pumps and hydraulic motors in the industry.

More information

Introduction. GP-F25 - A pressure balanced gear pump with displacments from 1.22 to 3.86 Cu. In/Rev. with Cast Iron end Plates

Introduction. GP-F25 - A pressure balanced gear pump with displacments from 1.22 to 3.86 Cu. In/Rev. with Cast Iron end Plates Introduction Dynamic Fluid Components, Inc. present their extended range of Fixed Displacement, Pressure Balanced, Hydraulic Gear Pumps. These products are manufactured in accordance with the requirements

More information

HIGH PRESSURE GEAR MOTOR WM900

HIGH PRESSURE GEAR MOTOR WM900 HIGH PRESSURE GEAR MOTOR WM9 HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide THE POWER OF THE WM9 A SERIES Haldex Hydraulicss is one of the world s leading manufacturers

More information

Hydraulic gear pumps and motors

Hydraulic gear pumps and motors K03TA Edition: 03/03.2006 Replaces: K 02 T A DISPLACEMENTS From 0.30 in 3 /rev (4,95 cm 3 /rev) To 4.50 in 3 /rev (73,82 cm 3 /rev) PRESSURE Max. Continuous Max. Intermittent Max. Peak Hydraulic gear pumps

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A609/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5

More information

Vane Pump & Motor Design Guide

Vane Pump & Motor Design Guide Vickers Service Guide Vane Pump & Motor Design Guide For Mobile Equipment Revised 8/98 353 Introduction Over the past twenty years, the application of hydraulics in agricultural, construction and materials

More information

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X

Variable Vane Pump, Direct Controlled PV7...A Series 1X / 2X Variable Vane Pump, Direct Controlled PV7...A Series 1X / X RE 1 Issue: 1.1 Replaces: 8.8 Sizes 1 to Maximum pressure 1 bar Displacement volume 1 to cm Features Very short control times Low noise Mounting

More information

Axial Piston Fixed Motor AA2FM (A2FM)

Axial Piston Fixed Motor AA2FM (A2FM) Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FM (2FM) R 91001/03.08 1/36 Replaces: 07.05 Technical data sheet Series 6 Sizes

More information

PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 1 E0.14.0503.02.01 TM GEAR PUMPS AND MOTORS GROUP 1 INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE rueninghaus Hydromatik Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar RE 9008/03.97 RE 9008/03.97

More information

Fixed Displacement Motor A4FM

Fixed Displacement Motor A4FM Brueninghaus Hydromatik Series 3, for open and closed circuits axial piston - swashplate design Sizes 22 56 Nominal pressure 400 bar Peak pressure 450 bar RE 900/2.95 RE 900/2.95 replaces 0.90 Fixed displacement

More information

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S

Vickers. Service Data. Vane Pumps. Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released M 2497 S Service Data Vickers Vane Pumps Vane Type Triple Pump (F3) 4535VQSV10* ***** ******* 20* Released 08 01 95 M 2497 S 10 SAE rated capacity (V10 cover end cartridge) USgpm Rotor Vane Kit Ring Pin Pin Bolt

More information

Hydraulic Pump/Motor Division. John Duba Product Manager Piston Pumps. Hydraulic Pump/Motor Division

Hydraulic Pump/Motor Division. John Duba Product Manager Piston Pumps. Hydraulic Pump/Motor Division John Duba Product Manager Piston Pumps Otsego Core Competency... Piston Pumps PAVC Series : 4 displacements from 33-100 cc/r, 207 Bar, 3000 RPM PVP Series : 9 displacements from 16-140 cc/r, 250 Bar, 3000

More information

Fixed displacement vane pumps

Fixed displacement vane pumps Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double

More information

TMT, TMTU and TMT FL Orbital Motors. Technical Information

TMT, TMTU and TMT FL Orbital Motors. Technical Information TMT, TMTU and TMT FL Orbital Motors Technical Information A Wide Range of Orbital Motors A WIDE RANGE OF ORBITAL MOTORS F300030 Tif Sauer-Danfoss is a world leader within production of low speed orbital

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A60/E Axial piston pumps type PVP variable displacement, by a full line of mechanical controls PVPL4046 PVP are variable displacement axial piston pumps for high pressure operation,

More information

Orbital Motor VMP Series 2

Orbital Motor VMP Series 2 Technical Information Orbital Motor VMP Series 2 powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev March 2016 Updated to Engineering Tomorrow design 0204 January 2016 Technical

More information

Axial piston variable motor A6VM series 71

Axial piston variable motor A6VM series 71 xial piston variable motor 6VM series 71 RE 91610 Edition: 06.2014 Replaces: 04.2013 Sizes 60 to 215 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits Features Variable motor with

More information

Dual Path Mobile Pump

Dual Path Mobile Pump Dual Path Mobile Pump Technical Manual 350 Series 350 Series Mobile Pump Introduction Single Assembly* Dual Path Assembly The 350 Series mobile pump is an advanced, closed circuit, servo controlled, axial

More information

HPV-02. Variable Pump for closed loop circuit

HPV-02. Variable Pump for closed loop circuit HPV-02 Variable Pump for closed loop circuit We move the world. Hydraulic Components + Electronic Components from Linde this means total Vehicle Management through the complete Linde System. Linde the

More information

PILOT OPERATED CHECK VALVE - Series VC4V

PILOT OPERATED CHECK VALVE - Series VC4V PILOT OPERTED CHECK VLVE - Series VCV Veljan Pilot Operated Check Valves VCV are with pilot control for hydraulic unlockg. These are sprg-loaded poppet type valves. Mountg configuration of VCV are accordg

More information

Orbital Motors TMT, TMTU, TMTW, TMT FL and TMTW FL

Orbital Motors TMT, TMTU, TMTW, TMT FL and TMTW FL MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors TMT, TMTU, TMTW, TMT FL and TMTW FL powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 2014 Converted

More information

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications

Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Q Series Piston Pumps Variable Displacement, Quiet Series for Industrial Applications Technical Catalog PVQ10 PVQ13 PVQ20 PVQ25 PVQ32 PVQ40 PVQ45 Table of Contents Introduction......................................................................................................

More information

Vickers Vane Pumps V Series - Low Noise Vane Pumps. High Performance Intravane Pumps For Industrial Applications

Vickers Vane Pumps V Series - Low Noise Vane Pumps. High Performance Intravane Pumps For Industrial Applications Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power

More information

Orbital Motors TMT, TMTU, TMTW, TMT FL and TMTW FL

Orbital Motors TMT, TMTU, TMTW, TMT FL and TMTW FL Technical Information Orbital Motors TMT, TMTU, TMTW, TMT FL and TMTW FL powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev March 2016 Engineering Tomorrow 0402 November 2014

More information

GEAR PUMPS. from 500 to 4000 RPM

GEAR PUMPS. from 500 to 4000 RPM Displacement Pressure Speed from 4,00 to 31,00 ccm up to 310 bar from 500 to 4000 PM GEA PUMPS TABE OF CONTENTS Table of Contents DESCIPTION... 2 BASIC PATS OF PUMP... 2 PAAMET TABE... 3 FOMUAS USED FO

More information

Power Units / Systems

Power Units / Systems Vickers Power Units / Systems Integrated Motor Pump MP, MP22, MP45, MP75 & MP92 kw, 20 hp to 92 kw, 125 hp This edition of the Integrated Motor Pump brochure includes the following pump series: Piston

More information

V Series AXIAL PISTON PUMP ORDER CODE

V Series AXIAL PISTON PUMP ORDER CODE V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 10 D X A 1001 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Max. Displacement (cm 3 /n): 15, 18, 23,

More information

PUMP AND MOTOR DIVISION

PUMP AND MOTOR DIVISION INSTALLATION MANUAL SERIES P2 and P3 MOBILE PISTON PUMP 1 Check model code / compare with your paper work Nameplate of the pump Ordering / Sales Acknowledgement 2 Check rotation of the pump Clockwise rotation

More information

Series 20 Axial Piston Pumps. Technical Information

Series 20 Axial Piston Pumps. Technical Information Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss

More information

Gear Motors Group 1, 2 and 3. Technical Information

Gear Motors Group 1, 2 and 3. Technical Information Gear Motors Group 1, 2 and 3 Technical Information Gear Motors Group 1, 2 and 3 General Information OVERVIEW The Sauer-Danfoss Gear Motors is a range of peak performance fixed displacement hydraulic motors

More information

General Aluminum Gear Pumps and Motors. Technical Information. OpenCircuitGear MEMBER OF THE SAUER-DANFOSS GROUP

General Aluminum Gear Pumps and Motors. Technical Information. OpenCircuitGear MEMBER OF THE SAUER-DANFOSS GROUP General luminum Gear Pumps and Motors OpenCircuitGear MEMER OF THE SUER-DNFOSS GROUP Technical Information MEMER OF THE SUER-DNFOSS GROUP General luminum Gear Pumps and Motors General Information Overview

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

VIKING HYDRAULIC GEAR PUMPS & MOTORS

VIKING HYDRAULIC GEAR PUMPS & MOTORS SERIES GP-04, -05, -07, -10, -14 Section 341.4 Page 341.4.1 Issue B OPERATING RANGE: GP Pumps (Cast Iron, Lip-Sealed) Displacements No. 24 Flow Range GPM 0.06 to 190 M 3 /Hr 0.011 to 43 Pressure PSI to

More information

FP12 FERRA SERIES HEAVY DUTY GEAR PUMP

FP12 FERRA SERIES HEAVY DUTY GEAR PUMP FP12 FERR SERIES HEVY DUTY GER PUMP Concentric B Innovation in Hydraulics DESIGNED FOR HEVY DUTY The FERR F12 pump is a rugged two-piece pump available with displacements from 16 to 41 cc/rev and pressures

More information

Axial piston pumps type PVPC variable displacement high pressure operation; with hydraulic controls or electrohydraulic servocontrols

Axial piston pumps type PVPC variable displacement high pressure operation; with hydraulic controls or electrohydraulic servocontrols Atos spa 21018 Sesto Calende, Italy - Fax 0331 920005 Table A160-4/E Axial piston pumps type VC variable displacement high pressure operation; with hydraulic controls or electrohydraulic servocontrols

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A60/E Axial piston pumps type PVP variable displacement, by a full line of mechanical controls PVPH4046 PVP are variable displacement axial piston pumps for high pressure operation,

More information

1.Booklet. Hydraulic Motors. General Purpose MotorsR Series

1.Booklet. Hydraulic Motors. General Purpose MotorsR Series .Booklet 1.Booklet Hydraulic Motors out 2 out 1.Booklet R Geroler Element... 11 Displacements... [15] ** 75 [20] * Speed... Up to 10 RPM Pressure Bar [PSI]... 125 [1800] Cont. 165 [2400] Inter. Torque

More information

Fixed displacement vane pumps

Fixed displacement vane pumps Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double

More information

TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors. Technical Information

TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors. Technical Information TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors Technical Information A Wide Range of Orbital Motors A wide range of orbital motors F300030 Tif Sauer-Danfoss is a world leader within production of low

More information

TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors. Technical Information

TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors. Technical Information TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors Technical Information A Wide Range of Orbital Motors A Wide Range of Orbital Motors F300030 Tif Sauer-Danfoss is a world leader within production of low

More information

Vickers. Piston Pumps

Vickers. Piston Pumps Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3

More information

TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors. Technical Information

TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors. Technical Information TMT, TMTU, TMTW, TMT FL and TMTW FL Orbital Motors Technical Information A Wide Range of Orbital Motors A Wide Range of Orbital Motors F300030 Tif Sauer-Danfoss is a world leader within production of low

More information

PRODUCT CARD GEAR PUMPS AND MOTORS ORS GROUP 3 E0.17.0703.02.01 TM GEAR PUMPS AND MOTORS INDEX Page 1 - GENERAL INDEX Page 2 - Features - Quick guide Page 3 - Features - General - Working conditions -

More information

Pump Delivery ( 7 bar ) 100 PSI

Pump Delivery ( 7 bar ) 100 PSI V Axial Piston Pump V V Series Axial Piston Pump 1. Combining special internal designs and strict engineering disciplines has reduced noise level to new lows in whole pressure zones. DR UT IN nominal pressure

More information

Axial Piston Pumps for Open Circuits in Mobile, Industrial and Marine Applications

Axial Piston Pumps for Open Circuits in Mobile, Industrial and Marine Applications xial Piston Pumps for Open Circuits in Mobile, Industrial and Marine pplications Contents 1. General Description...IFC 2. Specifications...1 3. Model Coding...2 4. Functional Description of Regulators...4

More information

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg 21 Series 0.3 hp 0.22 kw 0.2 15.2 ft. lbs. 0.27 20.6 Nm Non-Reversible Rear Exhaust 21M1340-40 Spindle Rotation All models are right-hand rotation. To order left-hand rotation models (not reversible) substitute

More information

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51 83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE

More information

High Pressure Gear Pumps KP 5

High Pressure Gear Pumps KP 5 High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket

More information

Precision Machinery Company. Swash-plate Axial Piston Pump K3VL

Precision Machinery Company. Swash-plate Axial Piston Pump K3VL Precision Machinery Company Swash-plate xial Piston Pump K3VL CONTENTS Specifications and Features 2 1. Ordering Code 1-1. Pump Options 3 1-2. Regulator Options 4 2. Technical Information 2-1. Technical

More information

Compact Medium-pressure Vane Pump

Compact Medium-pressure Vane Pump Compact Medium-pressure Vane Pump Features The straight vane type structure realizes compact and lightweight design which brings greater cost effectiveness. These vane pumps with a maximum pressure of

More information

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES

PR*SP - PR*SPU - PILOT OPERATED PRESSURE RELIEF VALVE SERIES CONTINENTAL HYDRAULICS PR*SP - PR*SPU PILOT OPERATED PRESSURE RELIEF VALVE SERIES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM POWERFUL PR*SP - PR*SPU

More information

High Pressure Gear Pumps KP 0

High Pressure Gear Pumps KP 0 High Pressure Gear Pumps KP 0 2 KRACHT GmbH Gewerbestr. 20 58791 Werdohl, Germany fon +49(0)23 92/935-0 fax +49(0)23 92/935 209 mail info@kracht.eu web www.kracht.eu Construction According to its design,

More information

PM10 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT

PM10 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT PM10 VRIBLE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G PM10 - Variable displacement pump POCLIN HYDRULICS OVERVIEW PM10 is a variable displacement, axial piston pump, with swashplate

More information

Axial piston pumps type PVPC

Axial piston pumps type PVPC Atos spa 21018 Sesto Calende, Italy Fax 0331 920005 Table A1605/E Axial piston pumps type PVPC variable displacement, high pressure operation; with hydraulic or electrohydraulic controls PVPCSLE4046 PVPC

More information

PUMPS ~INDEX~ FIXED DISPLACEMENT VANE PUMPS- [275BAR] SOLTECH PAGE 173. (Without Connectors and Bracket) J518-ISO/DIS (ml/rev.

PUMPS ~INDEX~ FIXED DISPLACEMENT VANE PUMPS- [275BAR] SOLTECH PAGE 173. (Without Connectors and Bracket) J518-ISO/DIS (ml/rev. IXED DISPLACEMENT VANE - [7BAR] ~INDEX~ (SAE J7c, ISO/9-) (ml/rev.) (Without Connectors and Bracket) J-ISO/DIS - Max. Min. PSI Bar lbs Kg Suction Pressure SAE-B SAE-C / / 7.. -/" " 77.9. " -/" 79 SAE-C

More information

Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories

Truck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Pumps and Motors Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi

More information

PM45 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G

PM45 VARIABLE DISPLACEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C A L C A T A L O G P5 VRILE DISPLCEMENT PUMP CLOSED LOOP CIRCUIT T E C H N I C L C T L O G P5 - Variable displacement pump POCLIN HYDRULICS OVERVIEW P5 is a variable displacement, axial piston pump, with swashplate system,

More information