Laboratory furniture fume hoods

Transcription

1 IV Laboratory furniture fume hoods

2 Laboratory furniture Steel laboratory furniture Working stands 750 mm height Working stands 900 mm height Other equipment Laboratory tall cabinets Worktops Fume hoods Designing

3 Steel laboratory furniture The furniture that we offer is remarkable for its mechanical resistance. It has been constructed from highest quality materials. There is a wide selection of standard frames, cupboards, panels and worktops, but customized solutions are available too. Advantages steel construction based on A, C, O type frames covered by chemically resistant epoxy paint, featuring easy leveling, plastic feet; possibility of realization cabinets based on pedestal, without frames module system possibility of extend in the future wide selection of worktops possibility to choose height of stands: 900 mm (standing work) or 750 mm (sitting work) cabinets made of galvanized steel, covered by chemically resistant epoxy powder paint on light grey colour (RAL 7035 possibility to choose different colour from RAL palette) various configuration of cabinets: right/left s, drawer and, column with possibility to fit or containers on wheels under the worktop wall mounted cabinets closed or opened: height 480, 630, 780 mm selfclosing hinges and slides possibility to place lock for and s wide range of additional accessories chemo resistant sinks, armature, drains, eyewashers, emergency showers, top sections with different length shelves, bridges, electrical sockets, gas valves work safety guaranteed by compliance with PNEN and PNEN14727 norm consulting, projects and visualizations Indications and abbreviations SZ underbench cabinet SZK underbench cabinet with castors SZM underbench cabinet with service supply SZO octagonal underbench cabinet SZW wall mounted shelves with the SZWR wall mounted open shelves S frame cupboard frame height 2D double wing 1DP/1DL single left/right 1DP1S/1DL1S single left/right, one drawer 2D1S double wing, one drawer 2D2S double wing, two 3S three 4S four 81

4 Frames height 750 mm Frames with height of 750 mm (to sitting work).available types: A, C, O model drzwi model drzwi 450, 600, 900, 900, 1200, mm1500 [mm] A, C, O basic 2 MP_S P MP_S P MP_S P MP_S P MP_S P 450, 600, 900, 900, 1200, mm1500 [mm] A, C, O expendable 2 MP_S R MP_S R MP_S R MP_S R MP_S R TYPE A TYPE CC TYPE O Underbench cabinets Underbench cabinets to 750 mm frames, height of cabinet 480 mm, depth 500 mm szuflady katalogowy szuflady katalogowy 1 MP_SZ D MP_SZ D 900, 1200 [mm] 2 MP_SZ D MP_SZ D 450, 600, 900 [mm] 3 MP_SZ S MP_SZ S MP_SZ S Containers height 480 mm Containers on wheels to place under worktop, to 750 mm frame, height of cabinet 480 mm (+height of wheels), depth 500 mm 1 MP_SZK D MP_SZK D 3 MP_SZK S MP_SZK S 82

5 Frames height 900 mm Frames with of 900 mm (to standing work). Available types: A, C, O model drzwi model drzwi 450, 600, 900, 900, 1200, mm1500 [mm] A, C, O basic 2 MP_S P MP_S P MP_S P MP_S P MP_S P 450, 600, 900, 900, 1200, mm1500 [mm] A, C, O expendable 2 MP_S R MP_S R MP_S R MP_S R MP_S R TYPE A TYPE CC TYPE O Underbench cabinets Underbench cabinets to 900 mm frames, height of cabinets 630 mm, depth 500 mm szuflady katalogowy szuflady 1 / 1 MP_SZ D MP_SZ D1S MP_SZ D MP_SZ D1S 900, 1200 [mm] 2 / 1 / 2 Installation cabinets to 900 mm frame, height of cabinet 630 mm, depth 500 mm szuflady katalogowy 600, 450, 900, mm[mm] 1 1/ 2 MP_SZM D MP_SZ D MP_SZM D MP_SZ D MP_SZM D katalogowy Container height 630 mm MP_SZ D 2D MP_SZ D1S MP_SZ D2S MP_SZ D MP_SZ D1S MP_SZ D2S 450, 600, 900 [mm] 4 MP_SZ S MP_SZ S MP_SZ S Octagonal underbench cabinet, to 900 mm frame, height of cabinet 630 mm szuflady katalogowy 450, [mm] 1 MP_SZ D MP_SZO D MP_SZ D Containers on wheels to place under worktop, to 900 mm frame, height of cabinet 630 mm (+height of wheels), depth 500 mm 1 / 1 MP_SZK D MP_SZK D1S MP_SZK D MP_SZK D1S 4 MP_SZK S MP_SZK S 83

6 Wall mounted cabinets Wall mounted cabinets with s available in 3 different heights: 480, 630, 780 mm, Wall mounted cabinets Wall mounted cabinets available in 3 different heights 480, 630, 780 mm s can be glass as an option (opened or slided) height drzwi szuflady 450, 600, 450, 900, , mm1500 [mm] 480, 630, [mm] 1 / 2 / 3 height drzwi szuflady 450, 600, 450, 900, , mm1500 [mm] 480, 630, [mm] 1 / 2 / 3 katalogowy MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D MP_SZW D katalogowy MP_SZWR MP_SZ D 1D MP_SZWR MP_SZ D 1D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D MP_SZWR D Top sections and bridges Top sections and bridges available in segments in maximum length of 1500mm Columns with possibility to install media katalogowy MP_K (high) MP_K (low) Shelf installed between columns MP_PN katalogowy Bridges for media available in segments in maximum length of 1500 mm bridge for media katalogowy M_MW 84

7 Szafy laboratoryjne Steel laboratory furniture Optional equipment for cabinets and containers lock: for cabinet with double lock in every for cabinet with central lock locking all (pic. 2) or lock for every drawer (pic. 3) internal drawer possibility to replace standard internal shelf for internal drawer based on Tandembox slides possibility to change the height of based on Tandembox slides Dtype (pic. 4) glass tampered glass in aluminum frame, based on Blum hinges lock not available in this version (pic. 5) Orgaline flexible system of internal division of (pic. 6) Polypropylene cuvette Possibility to make cabinet with perforation (pic. 7) Options for tall cabinets lock (pic. 1) sliding glass (tempered glass) based on aluminum frame in Siso system (pic. 8) glass tempered glass in aluminum frame, based on Blum system; lock not available in this version (pic. 5) possibility to make cabinets on pedestal pic. 1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 85

8 Szafy laboratoryjne Laboratory tall cabinets Laboratory tall cabinets are available in various dimensions and configuration of interior Advantages: stable construction made of steel covered by powder coated chemically resistant epoxy paint (Qualicoat certificate) standard colour RAL 7035 (possibility to choose different colour from RAL palette option) interior made according to customer requirements (cabinets for files, card index files, clothing, reinforced etc.) lock (option) selfclosing hinges and slides single or double versions We also offer a wide range of cabinets partially opened and closed in standard version or adapted to customer requirements. 86

9 Worktops DURCON worktop made of epoxy resin. This material has monolithic and ideally homogenous structure on the whole thickness. It characterizes very low permeability, high resistance on high temperature, hardness comparable with stone and without stratification or fractures. DURCON is highly resistant to most acid and other chemical compounds and used in laboratory works as well as discoloration which is the result of pigment. Available thickness: 19 or 25 mm with or without marine edge. QUARTZGRANITE CONGLOMERATE worktop made of quartzgranite conglomerate with polyester resin. This kind of worktop characterizes high mechanical resistance and smooth surface. Possibility to also marine edge worktop. Thickness: 20 mm. MAX RESISTANCE laboratory worktop made of pressure laminate. It consists of hard black core (manufactured as a result of pressing of cellulose fibres in high pressure and temperature) which is covered both sided with layer of special paper and melamine resin. This material is nonflammable and does not absorb moisture. Surface is resistant on many chemical substances. Thickness: 420 mm. LAMINATE worktop made of chipboard covered on the outside with layer of HPL laminate. Because of its limited chemical and physical resistance, laminate worktops are applicable mainly as tables under apparatus, subsidiary tables or laboratory desks. MONOLITE CERAMIC this worktop is homogenous in the whole section, glazed with very high chemical resistance (except HF acid) and mechanical. Possibility to flat or with marine edge. ACID PROOF STAINLESS STEEL worktop made of steel grade OH18N9 (AISI 304, DIN ). High mechanical and thermal resistance. Possibility to worktop with marine edge. 87

10 Chemical resistance table of selcted worktops comparison test The conditions of the test: In the case of nonvolatile substances, the reagent of app.1/2cm3 was placed on the tested sample of the material. Used in futher tests chemicals were covered on the surface of the tested sample of the material with the glazed surface to slow down the evaporation process In the case of volatile reagents, soaked cotton was placedon the tested sample of the material and it was covered with the glass lid. The test had ran for 16 hours; then the surface of the tested sample of the material was washed with water and the soap, then dried. The above table shows the test results. 88

11 The conditions of the test: In the case of nonvolatile substances, the reagent of app.1/2cm3 was placed on the tested sample of the material. Used in futher tests chemicals were covered on the surface of the tested sample of the material with the glazed surface to slow down the evaporation process In the case of volatile reagents, soaked cotton was placedon the tested sample of the material and it was covered with the glass lid. The test had ran for 16 hours; then the surface of the tested sample of the material was washed with water and the soap, then dried. The above table shows the test results. 89