A0. User s Manual. 6-Po 80H1. .com.tw

Transcription

1 CHENBRO 6-Po ort 6Gb/s SATA/SAS Backplane 80H 07A0 March / 0

2 Copyrigh ht Copyright 0 Chenbro Micom Co.,, Ltd.. All rights reserved. Unless otherwise indicated, all materials in this manual are copyrighted by Chenbro Micom Co., Ltd.. All rights reserved. No part of this manual, either text or image may be used for any purpose other than internal use within purchasing company. Therefore, reproduction, modification in any form or by any means, electronic, mechanical or otherwise, for reasons other than internal use, is strictly prohibited without prior p written permission. Chenbro Micom Co., Ltd. reserves the right to make improvement and modification to the products indicated in this manual at any time. Specifications are therefore subject to change without prior notice. Information provided in this manual is intended too be accurate and reliable. However, Chenbro Micom Co., Ltd., assumes no responsibility for its use, nor for any nfringements upon the rights of third parties, which may result from its use. Technica al Support Chenbro works hard to offer our customers maximum performance from our chassis. But in i case you have any problem with our product you can find supports from the following resources. Web Support Detail information of our products is in our website. You can find technical updates, installation guides, FAQs, technical specifications and more. Our web address is:. Support You can also fill out the technical support form at our Technical Support page. Your technical issue inquiries will be sent directly to our support professionals. Phone Support You can also contact Chenbro HQ or branch office for immediate support; contact Information is as following: Chenbro HQ Tel: Fax: Chenbro UK LTD Tel: -(0) Fax: -(0) Chenbro Europe B.V. Tel: Fax: Chenbro China Office Tel: Fax: Chenbro Micom (USA) Inc. Tel: Fax :

3 Contents Copyright... Technical Support... Contents... Safety Instruction... Revision History... 6Gb/s Backplane Specification Accommodation Chassis. 5 Backplane Layout... 6~9

4 Safety Instruction CAUTION: Informs the user of conditions that t might result in damage too hardware, corruption of customer data or application software, or long-term health hazard to people. A caution always precedes the information to which it relates. WARNING: Alerts the user to conditions thatt might result in injury or death. A warningg always precedes the information to which it pertains. Revision History Date Modifications March / 0 / 0 Firstt release

5 6Gb/s Backplane Specification P/N: 80H07A0 Host Interface HDD Interface Hot-Swap Display Cooling Power Connector Other Connectors Dimension Material x Mini-SAS interface (SFF-8087) for host side (w/lock housing), port distribution should be + SASS (5+7+7)) and SATA A-II (5+7)compatiblee with.5 HDD Hard drives can be replaced duringg the system on LED indicates HDD status (Definedd by Chenbro) Power LED Blue light (HDD is on) Access LED Green flash (HDD is working) Error indicatorr Red light (HDD is abnormal) ) -pin fan connector x Standard +5V and +V -pin power connector x -pin power alarm connector x -pin alarm mute connector x 6-dip function switch for monitoringg fan and temp -dip SGPIO function switch -pin HDD fail connector x 7-pin function connector for fan faill LED / power mute LED / global mute switch 57. mm (Length) x 80.0 mm (Width) x. mm (Thickness) FR layer Accomm modation Chassis RM706 5

6 Backplan ne Layout Backplane Connectors Front View Rear View () [LD / LD / LD / LD / LD5 / LD6] : Blue lights on indicated hard drive is power on. () [LD / LD / LD / LD / LD5 / LD6] : Green lights flash indicated hard drive is working. Red lights on indicated hard drive iss abnormal or malfunction. 6

7 () [JF / JF / JF / JF] : Fan connector (pin) Number Descriptions G V FAN Clock Input () [CN0 / CN05] : Power connector (+5V and +V pin) Number Descriptions V 5V (5) [JP] : Alarm mute connector (To redundant power supply) (6) [JM] : Power supply abnormal alarm connector (From redundant power supply) (7) [CN0 / CN06] : Reserved for Chenbro use only. (8) [SW] : Fan and Temp function switch. Number 5 6 Monitor Fan Fan Fan Fan TEMP On Off Enablee Disable Enablee Disable Enablee Disable Enablee Disable 65 degc 555 degc 7

8 (9) [CN08] : SGPIO function switch. SGPIO SGPIO Active SGPIO Fail Function Short Open (0) [CN0 / CN0] : SGPIO input (Require a dedicated SGPIO cable) Define Key SB0 SB CN0 take care HDD #~# CN0 take care HDD #5~#6 Define 0 N/A 8 SB7 6 SB SB SB SB6 SB5 () [CN07] : Connector of fan fail LED & Power temp fail LED & Global mute switch Define Define FAN FAIL LED + 5 GLOBAL MUTE SWITCH + FAN FAIL LED - 6 GLOBAL MUTE SWITCH - POWER / TEMP FAIL LED + 7 POWER / TEMP FAIL LED - 8 Key pin () [CN / CN / CN / CN / CN5 / CN6] : To connect with hard drives (-pin SATA-II or 9-pin SAS). 8

9 NO. S S S S S5 S6 S7 S8 S9 S0 S S S S Descriptions RP RN TN TP Descriptions NO. P P P P P5 POWER ENABLE P6 P7 5V PRE-CHARGE P8 5V P9 5V P0 P ACCESS SIGNAL P P V PRE-CHARGE P V P5 V 9