HIGH PERFORMANCE SOLID CARBIDE CUTTING TOOLS
|
|
- Maria French
- 7 years ago
- Views:
Transcription
1 HIGH PERFORMANCE SOLID CARBIDE CUTTING TOOLS CATALOG 12
2 TOLERANCES [.030" ".0004" ( mm) á 1/32" +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1".0001".0004" ( mm) Stub Shorter flute length for rigidity TiALN Coated - page M (860M metric) - 2 Flute 170M (870M metric) - 4 Flute.0050" " (0.127mm mm) 2 Flute 4 Flute l1 l2 Shank Overall Flute Metric " /8" 1-1/2".008" " /8" 1-1/2".009" " /8" 1-1/2".011" " /8" 1-1/2".012" " /8" 1-1/2".014" " /8" 1-1/2".015" " /8" 1-1/2".017" " /8" 1-1/2".018" " /8" 1-1/2".020" " /8" 1-1/2".021" " /8" 1-1/2".023" " /8" 1-1/2".024" " /8" 1-1/2".026" " /8" 1-1/2".027" " /8" 1-1/2".029" " /8" 1-1/2".030" " /8" 1-1/2".032" " /8" 1-1/2".033" " /8" 1-1/2".035" " /8" 1-1/2".036" " /8" 1-1/2".038" " /8" 1-1/2".039" " /8" 1-1/2".041" " /8" 1-1/2".042" " /8" 1-1/2".044" " /8" 1-1/2".045" /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" continued? fax
3 160M (860M metric) - 2 Flute (continued) 170M (870M metric) - 4 Flute (continued).0938" " (2.383mm mm) 2 Flute 4 Flute l1 l2 Shank Overall Flute Metric /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2" 7/16" /4" /4" 2" 1/2" /16" /16" 2" 1/2" /8" /8" 2" 5/8" /16" /16" 2-1/2" 5/8" /2" /2" 2-1/2" 5/8" /8" /8" 3" 3/4" /4" /4" 3" 1" " " 3" 1" Metric equivalents are for reference only
4 TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1".0001".0004" ( mm) 160MA (860MA metric) - 2 Flute 170MA (870MA metric) - 4 Flute Stub - TiALN Coated Shorter flute length for rigidity Dry or semi-dry machining Up to 40% faster than uncoated Uncoated - page Flute 4 Flute l1 l2 Shank Overall Flute Metric /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2" 7/16" /4" /4" 2" 1/2" /16" /16" 2" 1/2" /8" /8" 2" 5/8" /16" /16" 2-1/2" 5/8" /2" /2" 2-1/2" 5/8" /8" /8" 3" 3/4" /4" /4" 3" 1" " " 3" 1" fax
5 180M (980M metric) - 2 Flute 190M (990M metric) - 4 Flute Stub - Ball End Shorter flute length for rigidity TiALN Coated - page 155 TOLERANCES Ball radius [.030" ".0004" ( mm) á 1/32" +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1".0001".0004" ( mm) +.000".001" ( mm) [ 2 Flute 4 Flute l1 l2 Metric Shank Overall Flute " /8" 1-1/2".015" " /8" 1-1/2".023" " /8" 1-1/2".030" " /8" 1-1/2".038" " /8" 1-1/2".045" /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2" 7/16" /4" /4" 2" 1/2" /16" /16" 2" 1/2" /8" /8" 2" 5/8" /16" /16" 2-1/2" 5/8" /2" /2" 2-1/2" 5/8" /8" /8" 3" 3/4" /4" /4" 3" 1" Metric equivalents are for reference only
6 TOLERANCES [.030" ".0004" ( mm) á 1/32" +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1".0001".0004" ( mm) Ball radius +.000".001" ( mm) Stub - Ball End - TiALN Coated Shorter flute length for rigidity Dry or semi-dry machining Up to 40% faster than uncoated Uncoated - page 154 [ 180MA (980MA metric) - 2 Flute 190MA (990MA metric) - 4 Flute 2 Flute 4 Flute l1 l2 Metric Shank Overall Flute /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2" 7/16" /4" /4" 2" 1/2" /16" /16" 2" 1/2" /8" /8" 2" 5/8" /16" /16" 2-1/2" 5/8" /2" /2" 2-1/2" 5/8" /8" /8" 3" 3/4" /4" /4" 3" 1" fax
7 165M (865M metric) - 2 Flute 175M (875M metric) - 4 Flute TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1/2".0001".0004" ( mm) Stub - Double End Shorter flute length for rigidity TiALN Coated - page Flute 4 Flute l1 l2 Metric Shank Overall Flute /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2-1/2" 1/2" /4" /4" 2-1/2" 1/2" /16" /16" 2-1/2" 1/2" /8" /8" 2-1/2" 1/2" /16" /16" 2-3/4" 9/16" /2" /2" 3" 5/8" Metric equivalents are for reference only
8 TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1/2".0001".0004" ( mm) 165MA (865MA metric) - 2 Flute 175MA (875MA metric) - 4 Flute Stub - Double End - TiALN Coated Shorter flute length for rigidity Dry or semi-dry machining Up to 40% faster than uncoated Uncoated - page Flute 4 Flute l1 l2 Metric Shank Overall Flute /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2-1/2" 1/2" /4" /4" 2-1/2" 1/2" /16" /16" 2-1/2" 1/2" /8" /8" 2-1/2" 1/2" /16" /16" 2-3/4" 9/16" /2" /2" 3" 5/8" /8" /8" 4" 3/4" /4" /4" 4" 1" fax
9 185M (985M metric) - 2 Flute 195M (995M metric) - 4 Flute Stub - Double End - Ball End Shorter flute length for rigidity TiALN Coated - page 159 TOLERANCES Ball radius [.030" ".0004" ( mm) á 1/32" +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1/2".0001".0004" ( mm) +.000".001" ( mm) [ 2 Flute 4 Flute l1 l2 Metric Shank Overall Flute /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2-1/2" 1/2" /4" /4" 2-1/2" 1/2" /16" /16" 2-1/2" 1/2" /8" /8" 2-1/2" 1/2" /16" /16" 2-3/4" 9/16" /2" /2" 3" 5/8" /8" /8" 4" 3/4" /4" /4" 4" 1" Metric equivalents are for reference only
10 TOLERANCES [.030" ".0004" ( mm) á 1/32" +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1/2".0001".0004" ( mm) Ball radius +.000".001" ( mm) [ Stub - Double End - Ball End - TiALN Coated Shorter flute length for rigidity Dry or semi-dry machining Up to 40% faster than uncoated Uncoated - page MA (985MA metric) - 2 Flute 195MA (995MA metric) - 4 Flute 2 Flute 4 Flute l1 l2 Metric Shank Overall Flute /32" /8" 1-1/2" 1/16" /64" /8" 1-1/2" 3/32" /16" /8" 1-1/2" 1/8" /32" /8" 1-1/2" 3/16" /8" /8" 1-1/2" 1/4" /32" /16" 2" 5/16" /16" /16" 2" 3/8" /32" /4" 2-1/2" 1/2" /4" /4" 2-1/2" 1/2" /16" /16" 2-1/2" 1/2" /8" /8" 2-1/2" 1/2" /16" /16" 2-3/4" 9/16" /2" /2" 3" 5/8" /4" /4" 4" 1" fax
11 220M (820M metric) - 2 Flute 223M (823M metric) - 3 Flute 230M (830M metric) - 4 Flute.0050" " (0.127mm mm) Standard TiN Coated - page 162 TiCN Coated - page 163 TiALN Coated - page 164 TOLERANCES [.030" ".0004" ( mm) á 1/32" +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1-1/4".0001".0004" ( mm) 2 Flute 3 Flute 4 Flute l1 l2 Metric Shank Overall Flute " /8" 1-1/2".015" " /8" 1-1/2".018" " /8" 1-1/2".021" " /8" 1-1/2".024" " /8" 1-1/2".027" " /8" 1-1/2".030" " /8" 1-1/2".033" " /8" 1-1/2".036" " /8" 1-1/2".039" " /8" 1-1/2".042" " /8" 1-1/2".045" " /8" 1-1/2".048" " /8" 1-1/2".051" " /8" 1-1/2".054" " /8" 1-1/2".057" " /8" 1-1/2".060" " /8" 1-1/2".063" " /8" 1-1/2".066" " /8" 1-1/2".069" " /8" 1-1/2".072" " /8" 1-1/2".075" " /8" 1-1/2".078" " /8" 1-1/2".081" " /8" 1-1/2".084" " /8" 1-1/2".087" " /8" 1-1/2".090" /32" /8" 1-1/2" 3/32" /64" /8" 1-1/2" 1/8" /16" /8" 1-1/2" 1/4" /64" /8" 1-1/2" 1/4" /32" /8" 1-1/2" 3/8" Metric equivalents are for reference only
12 220M (820M metric) - 2 Flute (continued) 223M (823M metric) - 3 Flute (continued) 230M (830M metric) - 4 Flute (continued).1094" " (2.779mm mm) 2 Flute 3 Flute 4 Flute l1 l2 Shank Overall Flute Metric /64" /8" 1-1/2" 3/8" /8" /8" 1-1/2" 1/2" /64" /16" 2" 9/16" /32" /16" 2" 9/16" /64" /16" 2" 9/16" /16" /16" 2" 5/8" /64" /4" 2-1/2" 5/8" /32" /4" 2-1/2" 5/8" /64" /4" 2-1/2" 3/4" /4" /4" 2-1/2" 3/4" /64" /16" 2-1/2" 7/8" /32" /16" 2-1/2" 7/8" /64" /16" 2-1/2" 7/8" /16" /16" 2-1/2" 7/8" /64" /8" 2-1/2" 7/8" /32" /8" 2-1/2" 7/8" /64" /8" 2-1/2" 7/8" /8" /8" 2-1/2" 7/8" /64" /16" 2-3/4" 7/8" /32" /16" 2-3/4" 7/8" /64" /16" 2-3/4" 7/8" /16" /16" 2-3/4" 1" /64" /2" 3" 1" /32" /2" 3" 1" /64" /2" 3" 1" /2" /2" 3" 1" /16" /16" 3-1/2" 1-1/4" /8" /8" 3-1/2" 1-1/4" /16" /4" 4" 1-1/2" /4" /4" 4" 1-1/2" /8" /8" 4" 1-1/2" " " 4" 1-1/2" /4" /4" 4-1/2" 2" fax
13 220MT - 2 Flute 230MT - 4 Flute TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1".0001".0004" ( mm) Standard - TiN Coated Improved lubricity - 10% faster than uncoated Uncoated - page 160 TiCN Coated - page 163 TiALN Coated - page Flute 4 Flute l1 l2 Shank Overall Flute Metric /8" /8" 1-1/2" 1/2" /16" /16" 2" 5/8" /4" /4" 2-1/2" 3/4" /16" /16" 2-1/2" 7/8" /8" /8" 2-1/2" 7/8" /16" /16" 2-3/4" 1" /2" /2" 3" 1" /8" /8" 3-1/2" 1-1/4" /4" /4" 4" 1-1/2" " " 4" 1-1/2" Metric equivalents are for reference only
14 TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1-1/4".0001".0004" ( mm) 220MC - 2 Flute 223MC - 3 Flute 230MC - 4 Flute Standard - TiCN Coated Improved abrasion resistance and lubricity Up to 25% faster than uncoated Uncoated - page 160 TiN Coated - page 162 TiALN Coated - page Flute 3 Flute 4 Flute l1 l2 Metric Shank Overall Flute /32" /8" 1-1/2" 3/32" /64" /8" 1-1/2" 1/8" /16" /8" 1-1/2" 1/4" /64" /8" 1-1/2" 1/4" /32" /8" 1-1/2" 3/8" /64" /8" 1-1/2" 3/8" /8" /8" 1-1/2" 1/2" /64" /16" 2" 9/16" /32" /16" 2" 9/16" /64" /16" 2" 9/16" /16" /16" 2" 5/8" /64" /4" 2-1/2" 5/8" /32" /4" 2-1/2" 5/8" /64" /4" 2-1/2" 3/4" /4" /4" 2-1/2" 3/4" /64" /16" 2-1/2" 7/8" /32" /16" 2-1/2" 7/8" /64" /16" 2-1/2" 7/8" /16" /16" 2-1/2" 7/8" /64" /8" 2-1/2" 7/8" /32" /8" 2-1/2" 7/8" /64" /8" 2-1/2" 7/8" /8" /8" 2-1/2" 7/8" /64" /16" 2-1/2" 7/8" /32" /16" 2-1/2" 7/8" /64" /16" 2-1/2" 7/8" /16" /16" 2-3/4" 1" /64" /2" 3" 1" /32" /2" 3" 1" /64" /2" 3" 1" /2" /2" 3" 1" /16" /16" 3-1/2" 1-1/4" /8" /8" 3-1/2" 1-1/4" /16" /4" 4" 1-1/2" /4" /4" 4" 1-1/2" /8" /8" 4" 1-1/2" " " 4" 1-1/2" /4" /4" 4-1/2" 2" fax
15 220MA (820MA metric) - 2 Flute 223MA (823MA metric) - 3 Flute 230MA (830MA metric) - 4 Flute.0312" " (0.792mm mm) Standard - TiALN Coated Dry or semi-dry machining Up to 40% faster than uncoated Uncoated - page 160 TiN Coated - page 162 TiCN Coated - page 163 TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1-1/4".0001".0004" ( mm) 2 Flute 3 Flute 4 Flute l1 l2 Metric Shank Overall Flute /32" /8" 1-1/2" 3/32" /64" /8" 1-1/2" 1/8" /16" /8" 1-1/2" 1/4" /64" /8" 1-1/2" 1/4" /32" /8" 1-1/2" 3/8" /64" /8" 1-1/2" 3/8" /8" /8" 1-1/2" 1/2" /64" /16" 2" 9/16" /32" /16" 2" 9/16" /64" /16" 2" 9/16" /16" /16" 2" 5/8" /64" /4" 2-1/2" 5/8" /32" /4" 2-1/2" 5/8" /64" /4" 2-1/2" 3/4" /4" /4" 2-1/2" 3/4" /64" /16" 2-1/2" 7/8" /32" /16" 2-1/2" 7/8" /64" /16" 2-1/2" 7/8" /16" /16" 2-1/2" 7/8" /64" /8" 2-1/2" 7/8" /32" /8" 2-1/2" 7/8" /64" /8" 2-1/2" 7/8" Metric equivalents are for reference only
16 220MA (820MA metric) - 2 Flute (continued) 223MA (823MA metric) - 3 Flute (continued) 230MA (830MA metric) - 4 Flute (continued).3750" " (9.525mm mm) 2 Flute 3 Flute 4 Flute l1 l2 Shank Overall Flute Metric /8" /8" 2-1/2" 7/8" /64" /16" 2-3/4" 7/8" /32" /16" 2-3/4" 7/8" /64" /16" 2-3/4" 7/8" /16" /16" 2-3/4" 1" /64" /2" 3" 1" /32" /2" 3" 1" /64" /2" 3" 1" /2" /2" 3" 1" /16" /16" 3-1/2" 1-1/4" /8" /8" 3-1/2" 1-1/4" /16" /4" 4" 1-1/2" /4" /4" 4" 1-1/2" /8" /8" 4" 1-1/2" " " 4" 1-1/2" /4" /4" 4-1/2" 2" fax
17 220R - 2 Flute 230R - 4 Flute.0625" " (1.588mm mm) Standard - Corner Radius For stronger corners and part radius TiALN Coated - page 168 TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1".0001".0004" ( mm) +.001".001" ( mm) r 2 Flute 4 Flute l1 l2 r Shank Overall Flute Corner Metric Radius /16" /8" 1-1/2" 1/4".010" /16" /8" 1-1/2" 1/4".015" /32" /8" 1-1/2" 3/8".010" /32" /8" 1-1/2" 3/8".015" /32" /8" 1-1/2" 3/8".020" /8" /8" 1-1/2" 1/2".010" /8" /8" 1-1/2" 1/2".015" /8" /8" 1-1/2" 1/2".020" /8" /8" 1-1/2" 1/2".030" /16" /16" 2" 5/8".010" /16" /16" 2" 5/8".015" /16" /16" 2" 5/8".020" /16" /16" 2" 5/8".030" /4" /4" 2-1/2" 3/4".010" /4" /4" 2-1/2" 3/4".015" /4" /4" 2-1/2" 3/4".020" /4" /4" 2-1/2" 3/4".030" /4" /4" 2-1/2" 3/4".045" /4" /4" 2-1/2" 3/4".060" /16" /16" 2-1/2" 7/8".015" /16" /16" 2-1/2" 7/8".020" /16" /16" 2-1/2" 7/8".030" /16" /16" 2-1/2" 7/8".045" /16" /16" 2-1/2" 7/8".060" /8" /8" 2-1/2" 7/8".010" /8" /8" 2-1/2" 7/8".015" /8" /8" 2-1/2" 7/8".020" /8" /8" 2-1/2" 7/8".030" /8" /8" 2-1/2" 7/8".045" /8" /8" 2-1/2" 7/8".060" /2" /2" 3" 1".010" /2" /2" 3" 1".015" /2" /2" 3" 1".020" /2" /2" 3" 1".030" /2" /2" 3" 1".045" /2" /2" 3" 1".060" /2" /2" 3" 1".090" /2" /2" 3" 1".125" Metric equivalents are for reference only
18 220R - 2 Flute (continued) 230R - 4 Flute (continued).6250" " (15.875mm mm) 2 Flute 4 Flute l1 l2 r Shank Overall Flute Corner Metric Radius /8" /8" 3-1/2" 1-1/4".015" /8" /8" 3-1/2" 1-1/4".020" /8" /8" 3-1/2" 1-1/4".030" /8" /8" 3-1/2" 1-1/4".045" /8" /8" 3-1/2" 1-1/4".060" /8" /8" 3-1/2" 1-1/4".090" /4" /4" 4" 1-1/2".015" /4" /4" 4" 1-1/2".020" /4" /4" 4" 1-1/2".030" /4" /4" 4" 1-1/2".045" /4" /4" 4" 1-1/2".060" /4" /4" 4" 1-1/2".090" /4" /4" 4" 1-1/2".125" /4" /4" 4" 1-1/2".250" " " 4" 1-1/2".015" " " 4" 1-1/2".020" " " 4" 1-1/2".030" " " 4" 1-1/2".045" " " 4" 1-1/2".060" " " 4" 1-1/2".090" " " 4" 1-1/2".125" " " 4" 1-1/2".250" fax
19 220RA - 2 Flute 230RA (830RA metric) - 4 Flute.0625" " (1.588mm mm) Standard - Corner Radius - TiALN Coated Dry or semi-dry machining Up to 40% faster than uncoated For stronger corners and part radius Uncoated - page 166 TOLERANCES +.000".002" ( mm) 3mm - 6mm ".0003" ( mm) 1/4" - 1".0001".0004" ( mm) +.001".001" ( mm) r 2 Flute 4 Flute l1 l2 r Shank Overall Flute Corner Metric Radius /16" /8" 1-1/2" 1/4".010" /16" /8" 1-1/2" 1/4".015" /32" /8" 1-1/2" 3/8".010" /32" /8" 1-1/2" 3/8".015" /32" /8" 1-1/2" 3/8".020" /8" /8" 1-1/2" 1/2".010" /8" /8" 1-1/2" 1/2".015" /8" /8" 1-1/2" 1/2".020" /8" /8" 1-1/2" 1/2".030" /16" /16" 2" 5/8".010" /16" /16" 2" 5/8".015" /16" /16" 2" 5/8".020" /16" /16" 2" 5/8".030" /4" /4" 2-1/2" 3/4".010" /4" /4" 2-1/2" 3/4".015" /4" /4" 2-1/2" 3/4".020" /4" /4" 2-1/2" 3/4".030" /4" /4" 2-1/2" 3/4".045" /4" /4" 2-1/2" 3/4".060" /16" /16" 2-1/2" 7/8".015" /16" /16" 2-1/2" 7/8".020" /16" /16" 2-1/2" 7/8".030" /16" /16" 2-1/2" 7/8".045" /16" /16" 2-1/2" 7/8".060" Metric equivalents are for reference only
20 220RA - 2 Flute (continued) 230RA (830RA metric) - 4 Flute (continued) NEW NEW NEW NEW NEW NEW NEW NEW.3150" " (8.000mm mm) 2 Flute 4 Flute l1 l2 r Shank Overall Flute Corner Metric Radius /8" /8" 2-1/2" 7/8".010" /8" /8" 2-1/2" 7/8".015" /8" /8" 2-1/2" 7/8".020" /8" /8" 2-1/2" 7/8".030" /8" /8" 2-1/2" 7/8".045" /8" /8" 2-1/2" 7/8".060" /16" /16" 2-3/4" 1".010" /16" /16" 2-3/4" 1".015" /16" /16" 2-3/4" 1".020" /16" /16" 2-3/4" 1".030" /16" /16" 2-3/4" 1".045" /16" /16" 2-3/4" 1".060" /16" /16" 2-3/4" 1".090" /16" /16" 2-3/4" 1".125" /2" /2" 3" 1".010" /2" /2" 3" 1".015" /2" /2" 3" 1".020" /2" /2" 3" 1".030" /2" /2" 3" 1".045" /2" /2" 3" 1".060" /2" /2" 3" 1".090" /2" /2" 3" 1".125" /8" /8" 3-1/2" 1-1/4".015" /8" /8" 3-1/2" 1-1/4".020" /8" /8" 3-1/2" 1-1/4".030" /8" /8" 3-1/2" 1-1/4".045" /8" /8" 3-1/2" 1-1/4".060" /8" /8" 3-1/2" 1-1/4".090" continued? fax
Three Key Elements of a Cutting Tool
End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -
More informationNEW INTERCHANGEABLE REAMING HEAD SYSTEM FAST
August 2007 / NEW029.1 / PAGE 1 OF 7 NEW INTERCHANGEABLE REAMING HEA YTEM FAT ACCURATE GOO FINIH Ingersoll is introducing the QwikReam, a new high speed reaming system. The QwikReam consists of an interchangeable
More informationIcon Glossary. Icon Glossary. Technical Information N N. Number of Flutes. Center Cutting. Lengths. Coatings. Helix Angle. Ball Nose.
Icon Glossary Z3 Number of Flutes aterial Center Cutting Coatings Lengths Iron pecial Icon Glossary ALtima TiAlN TiCN TiN Fordlube Hardened (35-65Rc) 30 Helix Angle Ball Nose Non-Ferrous N N Neck Relief
More informationindexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
More informationPRODUCT SELECTION GUIDE - GROOVING
PRODUCT SELECTION GUIDE - GROOVING GROOVING PAGE 1-3 PAGE 1-5 For internal diameters of.125" and larger Groove widths.004"-.250" For depth of cut up to.150" Solid carbide shanks in 1/8", 3/16", 1/4", 5/16",
More informationCHAPTER E. DOC (Depth of cut) t max Bore Ø.031
Step #1: stablish bore diamter Step #2: Find Depth of Cut (DOC) requirements Step #3: Follow column and row to find correct tool type Step #4: Look up tool type to find available widths CHAPTR DOC (Depth
More information1001 Business Center Drive Mount Prospect, IL 60056-2181 Toll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866
1001 Business Center Drive Mount Prospect, IL 60056-2181 oll Free: (800) 950-5202 Phone: (847) 635-0044 Fax: (847) 635-7866 http://www.sumicarbide.com Sumitomo offers advanced milling, drilling, and hard
More informationDr Marcin Adamiak marcin.adamiak. www.imiib.polsl.pl/
FP7 NMP/INCO Brokerage Event Warsaw, 17-18 September 2009 Dr Marcin Adamiak marcin.adamiak adamiak@polsl.pl http://www.imiib.polsl.pl www.imiib.polsl.pl/ Institute of Engineering Materials and Biomaterials
More informationThink precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationHigh speed machining and conventional die and mould machining
High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions
More informationCOATED CARBIDE. TiN. Al 2 O 3
COATED CARBIDE GENERAL INFORMATION CVD = Chemical Vapour Deposition coated grades GC2015, GC2025, GC2135, GC235, GC3005, GC3015, GC3020, GC3025, GC3115, GC4015, GC4025, GC4035, S05F, and CD1810. PVD =
More informationTurbine blade machining. Intelligent tooling solutions cutting your costs
Turbine blade machining Intelligent tooling solutions cutting your costs Your innovative partner We aim at improving the competitiveness of our customers by reducing the unit costs in the cutting processes.
More informationcomprehensive training factory technical support on-site trouble shooting custom tool design
comprehensive training Increased productivity equals lower cost, improved profitability, and ultimately, survival of your business in today s competitive environment. The LMT Onsrud Performance Team will
More informationSolid End Mill Series
Solid End Mill Series Carbide material Now available! For automatic lathe New! 57 types, 52 descriptions Easy to use total length of 35mm and 45mm are available Solid End Mill Series Kyocera's solid end
More informationStatic and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
More informationChapter 2 Fractal Analysis in CNC End Milling
Chapter 2 Fractal Analysis in CNC End Milling Abstract This chapter deals with the fractal dimension modeling in CNC end milling operation. Milling operations are carried out for three different materials
More informationzeus Marking Technology
zeus Marking Technology Marking Tools Marking Rolls Engraving Technology Die Premium-Marke von Hommel+Keller zeus MARKING TECHNOLOGY zeus is a premium brand that stands for highest quality, precision,
More informationTHE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
More informationCutting force, Fc (N) ' 270. 100 110 120 130 Cutting speed (m/min)
159 Rake face Adhesion Rake face Nose wear Tool life = 50.2 min Nose wear Tool life = 30.9 min Figure 4.19 - Nose wear at the cutting edge of T4 coated carbide insert after machining Ti- 6Al-4V alloy with
More informationCUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids
CUTTING TOOL TECHNOLOGY 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids 1 Introduction Machining is accomplished by cutting tools. Cutting tools undergo high force and temperature and
More informationGear Cutting Tools. Hobbing Gear Milling. Leitz Metalworking Technology Group
Gear Cutting Tools Hobbing Gear Milling Leitz Metalworking Technology Group Important information Important information 4 Services 5 An introduction to FETTE 6 Page Important information Product range
More information* Provided that the overall length is within the minimum length parameter of the Gen II blank that is machined.
PLEASE SEE GEN II CUSTOM VALVE SPECIFICATIONS PAGES 42 & 43 CUSTOMER NAME CUSTOMER SIGNATURE DATE By signing this form I accept the goods are nonreturnable for credit and that Manley takes no responsibility
More informationTurbine blade machining Intelligent tooling solutions cutting your costs...
Turbine blade machining Intelligent tooling solutions cutting your costs... www.unimerco.com Tooling solutions for turbine blades Your innovative partner We aim at improving the competitiveness of our
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationInstallation Manuals Version n. 01 of 14/06/2013
Technical Manuals Installation Manuals Version n. 01 of 14/06/2013 pag. 2 Index Index... 2 Introduction and general hints... 3 Curving Profile... 3 DESCRIPTION... 3 MATERIAL... 3 CERTIFICATE... 3 SIZES...
More informationHandling Corrosive or Abrasive Liquids
Handling Corrosive or Abrasive Liquids Defining abrasion and corrosion An abrasive liquid is one that has particles in it. Some, like inks, have very fine particles, while others, like some paints, contain
More informationChapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
More informationThe measuring of the hardness
The measuring of the hardness In the field of mechanics one often meets with the notion of "hardness", and in fact the hardness is a fundamental characteristic to determine whether a certain material is
More informationLapping and Polishing Basics
Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)
More informationApplication Material Guide (AMG) Chart found on back cover 1-800-877-3745
Application Material Guide (AMG) Chart found on back cover Precision Dormer has expanded its range of high performance drills with the new. Manufactured with productivity and performance in mind, the HYDRA
More informationWood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
More informationQ&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
More informationU-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42) R215.64. Long edge cutter 215.3 0.17 (0.10-0.20) R215.3 -AAH 0.12 (0.08-0.
General Turning PROFILING Feed recommendations Feed per tooth, fz (mm/tooth) Insert geometry Insert size Starting value (min.- max.) U-Max Chamfering endmill SPMT-WL 0.17 (0.08-0.21) -WH 0.35 (0.10-0.42)
More informationcatalogotaglio02 cuttingtools02 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills
9 Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese in HSS HSS end mills Frese in metallo duro Carbide end mills Frese per cave End mills
More informationSmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
More informationHARD MILLING OPERATION OF AISI O2 COLD WORK TOOL STEEL BY CARBIDE TOOLS PROTECTED WITH DIFFERENT HARD COATINGS
JESTECH, 15(1), 21-26, (2012) JESTECH HARD MILLING OPERATION OF AISI O2 COLD WORK TOOL STEEL BY CARBIDE TOOLS PROTECTED WITH DIFFERENT HARD COATINGS Halil Çalışkan *, Cahit Kurbanoğlu **, Davorin Kramar
More informationCutting Tool Materials
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various
More informationMagnet Wire Hermincel 200 C
Magnet Wire Hermincel 200 C Description HERMINCEL is the generic name of multipurpose Magnet Wire produced based on polyester (Amide-Imide) insulation overcoated with polyamideimide. This wire has excellent
More informationSTATIC COEFFICIENT OF FRICTION MEASUREMENT USING TRIBOMETER. Static COF 0.00 0.0 0.5 1.0 1.5 2.0. Time(min) Prepared by Duanjie Li, PhD
STATIC COEFFICIENT OF FRICTION MEASUREMENT USING TRIBOMETER 0.20 Static COF Coefficient of Friction 0.15 0.10 0.05 0.00 0.0 0.5 1.0 1.5 2.0 Time(min) Prepared by Duanjie Li, PhD 6 Morgan, Ste156, Irvine
More informationPlasma Electronic is Partner of. Tailor-Made Surfaces by Plasma Technology
Precision Fair 2013 Stand 171 Plasma Electronic is Partner of Tailor-Made Surfaces by Plasma Technology Dr. J. Geng, Plasma Electronic GmbH Modern Surface Technology in 1900 Overview A short introduction
More information8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles
8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,
More informationDUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
More informationEngine Bearing Materials
Engine Bearing Materials Dr. Dmitri Kopeliovich (Research & Development Manager) The durable operation of an engine bearing is achieved if its materials combine high strength (load capacity, wear resistance,
More informationTypical values for a Kapton Polyimide tape wrapped sample, according to NEMA Specifications
DACRON DACRON GLASS FIBER COVERED MAGNET WIRE CLASS 200 INSULATION DACRON Glass Fiber-covered Magnet Wire is manufactured by serving a combination of glass and Dacron fibers over a bare or film-coated
More informationPUSH-PULL CABLES CONTROL SYSTEMS
ISO 9001 CERTIFIED PUSH-PULL CABLES CONTROL SYSTEMS WESCON PRODUCTS COMPANY A subsidiary of LATSHAW ENTERPRISES, INC. WESCON'S PUSH-PULL CONTROL SYSTEMS Push-Pull Cable Ends Wescon Push-Pull Cable Assemblies
More informationDie casting Figure M2.3.1
Die casting Die casting is a moulding process in which the molten metal is injected under high pressure and velocity into a split mould die. It is also called pressure die casting. The split mould used
More informationDrive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
More informationDesign and Fabrication of a Wear Testing Machine
Leonardo Electronic Journal of Practices and Technologies ISSN 1583-1078 Issue 19, July-December 2011 p. 39-48 Design and Fabrication of a Wear Testing Machine Amal Ebrahim NASSAR * and Eman Ebrahim NASSAR
More informationDRAILROADRAI OADRAILROAD OLINGTOOLING. Catalog 7090 Metric & Inch
DRAILROADRAI OADRAILROAD OLINGTOOLING Catalog 7090 Metric & Inch 0 LEAD MILLS KSRM MILLING CUTTERS DRILL-FIX DFT DRILL-FIX DFR DRILLS L-TYPE BORING BARS WHEEL BORING WORLD S MOST COMPREHENSIVE TOOLING
More informationWear Resistant Low Friction Coatings for Machine Elements
Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology 583 Wear Resistant Low Friction Coatings for Machine Elements Possibilities and Limitations BY OLLE WÄNSTRAND
More information12.2 Compact Type, MSB Series
12.2 Compact Type, MSB Series A. Construction Upper Retainer Carriage End Cap End Seal Rail Grease Nipple Ball Lower Retainer 45 Bottom Seal 45 B. Characteristics The trains of balls are designed to a
More informationMULTI-TOOLS FOR FINN-POWER MACHINES
MULTI-TOOLS FOR FINN-POWER MACHINES Strength. Performance. Innovation. WHAT CAN WHAT CAN MULTI-TOOLS DO DO FOR YOU? Expand Turret Capacity Multi-Tools enable you to load the equivalent of 3, 8 or even
More informationStraight shank twist drills. Jobber drills. Jobber drills. DIN 338 GT 100 lh 1,300-10,200. DIN 338 N 2,36 lh 0,360-20,000. DIN 338 N lh 0,250-14,250
Jobber drills Jobber drills HSS 205 HSS 2456 DIN 338 N 2,36 rh 0,200-20,000 DIN 338 N rh 1,000-16,000 HSS 206 HSS 2457 DIN 338 H rh 0,200-20,000 DIN 338 GT 100 rh 1,000-15,000 HSS 207 HSCO 305 DIN 338
More information3M Fiber Optic Polishing. Total. Solutions. for Your. Polishing Needs
3M Fiber Optic Polishing Total Solutions for Your Polishing Needs 3 Innovative for your products unique polishing system 3M offers complete solutions for fiber optic connector polishing with a full line
More informationStyle 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
More informationMaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
More informationANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
More informationTAP into NAU. TAP is a single tool. How it works. Transfer Academic Plan nau.edu/tap
TAP into and an degree: the catalog TAP into and an degree: the catalog TAP into and an degree: the catalog TAP into and an degree: the catalog TAP into and an degree: the catalog TAP into and an degree:
More informationEROSPACE MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS
MOVING FORWARD WITH NBM W W W. N B M M E T A L S. C O M SPECIALTY COPPER ALLOYS FOR THE AEROSPACE INDUSTRY EROSPACE LEADING MANUFACTURER & MASTER DISTRIBUTOR OF BRASS, BRONZE, & COPPER ALLOYS NBM s corporate
More informationIPC-SM-840C. Qualification and Performance of Permanent Solder Mask IPC-SM-840C. The Institute for. Interconnecting. and Packaging Electronic Circuits
The Institute for Interconnecting and Packaging Electronic Circuits Qualification and Performance of Permanent Solder Mask January 1996 A standard developed by the Institute for Interconnecting and Packaging
More informationTubing and Accessories
Section 7 Tubing and Accessories Inch Industrial Tubing................................FIT-7-2 Metric Industrial Tubing...............................FIT-7-3 Inch D.O.T. Tubing...................................FIT-7-3
More informationSTANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES
ROOFING APPLICATION STANDARD (RAS) No. 117 STANDARD REQUIREMENTS FOR BONDING OR MECHANICAL ATTACHMENT OF INSULATION PANELS AND MECHANICAL ATTACHMENT OF ANCHOR AND/OR BASE SHEETS TO SUBSTRATES Scope 1.1.
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationPacamor Kubar Bearings (PKB) Newsletter
Pacamor Kubar Bearings (PKB) Newsletter January 2013 On-Time Aerospace Deliveries & Expanded Manufacturing Capabilities PKB FAA TSO-C149 Aircraft Bearings ISO 9001: 2008 / AS9100:2009 In This Issue Focus
More informationFlex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
More informationTechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
More informationMETALWORKING PRODUCTS. Deep hole drilling Product catalogue and application guide
METALWORKING PRODUCTS Deep hole drilling Product catalogue and application guide AB Sandvik Coromant Not only a tool supplier Sandvik Coromant is the No.1 supplier of cutting tools for the metalworking
More informationMetal-O-rings and C-rings for extreme operating conditions
Metal-O-rings and C-rings for extreme operating conditions From ultrahigh vacuum up to 6800 bar (100000 psi) pressure and temperatures from -269 C cryogenic up to +980 C (-425 F up to 1800 F). Resistant
More informationDRIVEN and STATIC TOOLING For OKUMA VDI30 (LB200-LT200-GENOS L200M-LT10M)
DRIVEN and STATIC TOOLING For OKUMA VDI30 (LB200-LT200-GENOS L200M-LT0M) 039 BERGIN RD. HOWELL, MI 48843 PHONE : 877-9-TOOLS ( 80-632-4446 ) FAX: 877-92-TOOLS ( 80-632-4467 ) EMAIL: info@mdtooling.com
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationTableting Punch Performance Can Be Improved With Precision Coatings
Tableting Punch Performance Can Be Improved With Precision Coatings by Arnold H. Deutchman, Ph. D. Director of Research and Development (614) 873-4529 X 114 adeutchman@beamalloy.net Mr. Dale C. Natoli
More informationLinear guide slides. For smooth and extremely accurate positioning
Linear guide slides For smooth and extremely accurate positioning Complete Gilman USA slide selection Linear slides ** Built-to-order Ball or roller styles Used for high-precision, high-speed applications
More informationMachine Tool Genome Project
Milling models enable pre-process parameter selection and optimization, but the results are specific to the tool-holder-spindle-machine combination. For example, stability lobe diagrams offer selection
More informationComputer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills
1 of 6 9/9/2014 3:59 PM I. Catalog Information Credit- Degree applicable Effective Quarter: Fall 2014 MCNC 75B Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced
More informationNSK Product Lineup for Machine Tools
NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.
More informationIP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
More informationHaitian MarsⅡ/h Series
Haitian MarsⅡ/h Series Haitian Plastics Machinery Group Co., LTD. No.1688 Haitian Road, Xiaogang, Beilun, Ningbo, P.R, China. Zipcode: 315821 Tel.: + 86 (0) 574 86175 86177242 Fax: + 86 (0) 574 86177181
More informationELECTRICAL CHARACTERISATION OF SEMI-RIGID COAXIAL CABLES WITH SMA AND K CONNECTORS. Carmen Diez Rafael García Juan Daniel Gallego.
ELECTRICAL CHARACTERISATION OF SEMI-RIGID COAXIAL CABLES WITH SMA AND K CONNECTORS March 2005 TECHNICAL REPORT C.A.Y. 2005-4 ABSTRACT Semi-rigid coaxial transitions are normally used in closed cycle refrigerators
More informationENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING. January 24, 2014 06610-1
ENGINEERING SPECIFICATION FIBERGRATE MOLDED GRATING January 24, 2014 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS MOLDED GRATING PART 1 - GENERAL 1.1 SCOPE OF WORK A. The CONTRACTOR
More informationNew potential for hand-guided routers
Routing Back 652 Routing Overview Bosch Accessories 11/12 New potential for hand-guided routers Bosch offers a compact, clearly structured range of router bits for a wide range of applications. And this
More informationAdvantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
More informationTHE ORIGINAL NAME IN HOLE CUTTING SYSTEMS
THE ORIGINAL NAME IN HOLE CUTTING SYSTEMS ABOUT US About Rotabroach Rotabroach is the original name in annular cutting technology. With over 40 years of experience in our industry, we have developed the
More informationModel CS 64 Mini-DIN Cable and Adaptor
Model CS 64 Mini-DIN Cable and Adaptor Page 1 of 9 Features Hi-Pro and NOAHlink compatible cable & Mini-DIN CS 64 Clip Module / NOAHlink Adaptor #1 Integrated Clip Module - Mini-DIN Cable Integrated NOAHlink
More informationMandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
More informationTable of contents BRAZED TURNING TOOLS. Toolholders H 2. Tips H 6. Rods H 8. Technical information H 9 H 1
Table of contents BRAZED TURNING TOOLS Toolholders 2 Tips 6 Rods 8 9 1 ISO External holders General turning External Ordering Tip According to ISO243-1975 (DIN 4982-198) h b l 1 f 1 f 2 a p r ε γ 1) λ
More informationRadial Insert Ball Bearings Housing Units. Our Expertise is Your Benefit. Schaeffler Group Industrial
Radial Insert Ball Bearings Housing Units Our Expertise is Your Benefit Schaeffler Group Industrial A p p l i c a t i o n s Quality for every eventuality: Radial insert ball bearings in industry Radial
More informationBSME Series SEXC Series
TOOLING NEWS E-124 P M K N S H CBN Small Hole Boring Bar Systems BSME Series SEXC Series BSME SEXC Series with brazed CBN cutting edge Minimum bore diameter = 2,5mm Series with indexable CBN insert Minimum
More informationMilling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
More informationQuestions: Does it always take the same amount of force to lift a load? Where should you press to lift a load with the least amount of force?
Lifting A Load 1 NAME LIFTING A LOAD Questions: Does it always take the same amount of force to lift a load? Where should you press to lift a load with the least amount of force? Background Information:
More informationService life of synthetic fibre ropes in deepwater lifting operations. The 15 th North Sea Offshore Cranes & Lifting Conference Ashley Nuttall
Service life of synthetic fibre ropes in deepwater lifting operations The 15 th North Sea Offshore Cranes & Lifting Conference Ashley Nuttall Fibre ropes for deepwater lifting Fibre ropes offer the following
More informationSpecifications for Programs: 737, 747, 757, 767, 777, 787
= Performed by GKN BAC 5000 AN General Sealing 6-262, 6-265, 6-267, 6-270 PSD for 787 Only: 6-242, 6-269, 6-271 PSD for 777 Only: 6-261,6-264, 6-266, 6-269, 6-271 BAC 5004 L Installation of Permanent Fasteners
More informationFor mechanical & hydraulic presses Inch & metric taps
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Professional IDT TM In-Die Tapping Catalog For mechanical & hydraulic presses Inch & metric taps www.danly.com Professional IDT TM In-Die Tapping Service
More informationDITCH WITCH MT12 MICROTRENCHER. ditchwitch.com
DITCH WITCH MT12 MICROTRENCHER ditchwitch.com Rule With An Iron Fist. ditchwitch.com DITCH WITCH MT12 MicroTrencher Throughout the world, demand is increasing for faster broadband communications, necessitating
More informationOptimizing Insertion Extraction Force in a Pin-Socket Interconnect
Optimizing Insertion Extraction Force in a Pin-Socket Interconnect IC Socket industry trends are impacted by a combination of technology and market- driven factors. Technology driven factors include miniaturization,
More informationStainless Linear Motion Rolling Guide series
products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com
More informationDoor Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,
More information