STUD CONNECTORS DSC...STUD TO CABLE...SE-9 ADSF...STUD TO FLAT...SE-5 DST...STUD TO TUBE...SE-13 DSATL...STUD TO TUBE...SE-6
|
|
- Miles Holmes
- 7 years ago
- Views:
Transcription
1 CONNECTORS BOLTED/ALUMINUM ADSC... TO CABLE ADSF... TO FLAT...-5 ADST... TO TUBE...- DSATL... TO TUBE...-6 WELDMENT/ALUMINUM WSATL...WELDMENT EXPANSION, TO TUBE...-8 BOLTED/BRONZE DS... TO TWO CABLES OR TUBES...-1 DS... TO CABLE OR TUBE DSC... TO CABLE...-9 DST... TO TUBE...-1 DSTL...EXPANSION, TO TUBE HDSF... TO FLAT ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
2 CONNECTORS BOLTED ALUMINUM TO CABLE Aluminum alloy stud connector for connecting aluminum cable to aluminum or copper equipment stud. Clamping bolts have hex-stops for one-wrench installation. Contact sealant is factory installed in connector stud threads and is recommended for conductor installation. ALUMINUM ADSC Casting 56-T6 Aluminum Alloy Hardware Aluminum Alloy Note: To specify 90 degree connector, add 90 to catalog number. Example: ADSC *ADSC06616 /-16 # Sol.-50 MCM #-/0 Str. ADSC06716 / MCM /0-6. MCM *ADSC # Sol.-50 MCM #-/0 Str. ADSC MCM /0-6. MCM ADSC MCM MCM *ADSC # Sol.-50 MCM #-/0 Str. ADSC MCM /0-6. MCM ADSC MCM MCM ADSC MCM MCM ADSC MCM MCM *ADSC /-1 # Sol.-50 MCM #-/0 Str. ADSC / MCM /0-6. MCM ADSC / MCM MCM ADSC / MCM MCM ADSC / MCM MCM ADSC MCM /0-6. MCM ADSC MCM MCM ADSC MCM MCM ADSC MCM MCM * Furnished with reversible cable caps. Continued on next page. CONDUCTOR RANGE DIMENSIONS INCHES (MM) APPROX. AAC ACSR DIA. L A B W J LBS. (KG) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) (8.1-.8) ( ) ( ) ( ) ( ) (8.1-.8) ( ) ( ) ( ) (8.1-.8) ANDERSON HUBBELL POWER SYSTEMS FARGO January / (16.05) 5-/ (16.05) 5- (1.88) 5-/ (16.05) 5-7/8 (19.) 5-/ (16.05) 5- (1.88) 5-7/8 (19.) 6- (168.8) 5-/ (16.05) 5-/ (16.05) 6 (15.) 6-1/ 6- (165.1) 5-/ (16.05) 6 (15.) 6-1/ 6- (165.1) -1/8 (5.98) -1/ (8.55) -1/ (8.55) - -/ (95.5) -1/ (8.55) - -/ (95.5) -1/ (8.55) - -/ (95.5) - (6.5) - (6.5) - (6.5) - (6.5) -/ - (6.5) - (6.5) -/ -1/ (8.55) - (6.5) - (6.5) -/ -1/ (8.55) - (6.5) -/ -1/ (8.55) 1.0 (.5) 1.1 (.50) 1.1 (.50) 1. (.5) 1. (.6) 1. (.5) 1. (.59) 1.6 (.7) 1.9 (.86). (1.0) 1. (.5) 1. (.59) 1.6 (.7) 1.9 (.86). (1.1) 1. (.59) 1.5 (.68).0 (.91). (1.09) 1
3 CONNECTORS BOLTED ALUMINUM TO CABLE (CONTINUED) ADSC MCM MCM ADSC / MCM /0-6. MCM ADSC / MCM MCM ADSC MCM MCM ADSC MCM MCM ADSC MCM MCM ADSC MCM MCM CONDUCTOR RANGE DIMENSIONS INCHES (MM) APPROX. AAC ACSR DIA. L A B W J LBS. (KG) ( ) ( ) (8.1-.8) ( ) ( ) (8.1-.8) ( ) 7-1/ (18.15) 5-1/ (1.5) 6- (168.8) 6-1/ 6- (165.1) 7 (177.8) - (11.) -/ (95.5) -1/ (8.55) - -/ (95.5) - (9.08) - (6.5) -1/ (8.55) -/ -1/8 (79.8) -/8 (85.7).9 (1.) 1.5 (.68).6 (1.18) 1.6 (.7). (1.0).6 (1.18).1 (1.1) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
4 CONNECTORS BOLTED ALUMINUM TO TUBE Aluminum alloy stud connector for connecting aluminum tubing to aluminum or copper equipment stud. Clamping bolts have hex-stops for one-wrench installation. Contact sealant is factory installed in connector stud threads and is recommended for conductor installation. ALUMINUM ADST Casting 56-T6 Aluminum Alloy Hardware Aluminum Alloy Note: To specify 90 degree connector, add 90 to catalog number. Example: ADST10901 CONDUCTOR SIZE ADST /-16 1 ADST / ADST / ADST ADST / ADST /-1 / ADST /-1 1 ADST /-1 1-1/ ADST /-1 ADST / ADST ADST / ADST ADST ADST ADST ADST /-1 1 ADST /-1 1- Continued on next page. DIMENSIONS INCHES (MM) TUBING IPS/EHIPS L A B W J 5- (19.7) 5-/ (16.05) 5-1/ (1.5) 5- (19.7) 5-/ (16.05) 5-/8 (16.5) 5- (19.7) 5- (19.7) 6-1/ 5-1/ (1.5) 5- (19.7) 5-/ (16.05) 6 (15.) 6-/8 (161.9) 6- (165.1) 7 (177.8) 5- (19.7) 6 (15.) APPROX. LBS. (KG) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015-1/8 (5.98) -1/8 (5.98) -1/ -/ - (6.5) -/ - (6.5) -/ -/ - - (6.5) -/ -1/ (8.55) - -/ (95.5) -/ -1/ (8.55) -1/ (8.55) - (9.08) -1/ (8.55) - (9.08) -1/ (8.55) - (9.08) -/8 (111.1) -1/ (8.55) - (9.08) -7/8 (98.) -/8 (111.1) 5- (19.7) -1/ (8.55) -7/8 (98.) 1. (.6). (1.0) 1.5 (.68) 1.6 (.7). (1.0) 1.5 (.68) 1.7 (.77). (1.09).5 (1.6) 1.8 (.8) 1.9 (.86).7 (1.).9 (1.).9 (1.77).1 (1.9). (.0).0 (.91).0 (1.6)
5 CONNECTORS BOLTED ALUMINUM TO TUBE (CONTINUED) CONDUCTOR SIZE DIMENSIONS INCHES (MM) APPROX. TUBING IPS/EHIPS L A B W J LBS. (KG) ADST /-1 6-/ 5-.5 (171.5) (19.7) (.0) ADST ADST001-1 ADST ADST001-1 ADST ADST001-1 ADST001-1 ADST (15.) 6-/8 (161.9) 6- (168.8) 7 (177.80) 6- (168.8) 7-7/8 (00.0) 8-1/8 (06.8) 8-7/8 (5.) (7.6) - (6.5) -7/8 (7.0) -7/8 (7.0) -7/8 (7.0) -1/ (8.55) - -/ (95.5) -1/ (8.55) 5 (17) -7/8 (98.) -/8 (111.1) -7/8 (1.8) 5- (19.7) -7/8 (96.) 5-7/8 (19.) 7 (177.8) 8 (0.). (1.5).8 (.18) 6.0 (.7) 6. (.9).5 (.0) 7.7 (.9) 8. (.7) 8.6 (.9) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
6 CONNECTORS BOLTED ALUMINUM TO FLAT ALUMINUM ADSF Aluminum alloy stud connector for connecting aluminum flat to aluminum or copper equipment stud. Contact surfaces are finished on both sides of the pad. Clamping bolts have hex-stops for onewrench installation. Contact sealant is factory installed in connector stud threads and is recommended for conductor installation. Casting 56-T6 Aluminum Alloy Stud Mounting Hardware Aluminum Alloy Note: To specify 90 degree connector, add suffix 90 to catalog number. Example: ADSF11D8901 FIG. NO. FLAT BAR WIDTH ADSF101D ADSF111B ADSF111C81-1 ADSF111D81-1 ADSF11C81 1-1/-1 ADSF11C ADSF11D ADSF11D ADSF11D ADSF161D81 1-/-1 ADSF01D11-1 ADSF01D1-1 ADSF01D1-1 DIMENSIONS INCHES (MM) L A B T J K 7-1/8 /8 /8 (180.98) 7 (177.8) 6 (15.) 6-1/ 7-/8 (187.) 7-/8 (187.) 7 (177.8) 7-/8 (187.) 7-/8 (187.) 7-/8 (187.) 8-/8 (1.7) APPROX. LBS. (KG) 1.1 ANDERSON HUBBELL POWER SYSTEMS FARGO January 015-1/ (8.55) -1/ (8.55) -1/ (8.55) -1/ (8.55) (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) / (19.05) /8 (9.5) / (19.05) / (19.05) (9.5) (8.58) (8.58) (8.58) (8.58) (8.58) (8.58) (8.58) (8.58) (8.58) (.50) 1.0 (.50) 1.8 (.8). (1.0) 1.9 (.86). (1.0). (1.1).6 (1.). (1.5).0 (1.8).5 (1.6).0 (1.8) 5.0 (.) 5
7 ALUMINUM DSATL CONNECTORS BOLTED ALUMINUM EXPANSION TO TUBE Aluminum and bronze alloy, expansion stud connector for connecting aluminum tubing to copper stud. Aluminum surfaces are assembled with contact sealant. Tubing guide ball and laminations are designed for use with standard (schedule 0 I.P.S.) tubing. Contact sealant is recommended. Castings aluminum alloy tube clamping and guide ball bronze alloy stud clamping Preformed laminated shunts copper (tinned contacts) Hardware stainless steel and galvanized steel Notes: (1) To specify 90 degree connector, add 90 to catalog number. Example: DSATL10G901 () To specify extra heavy (schedule 80 EHIPS) tubing, add H to catalog number. Example: DSATLH10G1 6 CONDUCTOR SIZE DIMENSIONS INCHES (MM) APPROX. TUBING IPS L A B J JJ LBS. (KG) DSATL1110G / 10.8 (0.8) (.90) DSATL111G / DSATL111G DSATL110G1-1 DSATL110G1 1-1/-1 1 DSATL11G1 1-1/-1 1-1/ DSATL11G1 1-1/-1 1- DSATL10G1 1-1/-1 DSATL110G Continued on next page. 1 (0.8) 1 (0.8) 1-1/ (6.55) 1 (0.8) 1 (0.8) 1 (0.8) 1 (0.) 1 (0.) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015-1/ (8.55) - -/ -1/ (8.55) - -/ 11. (5.1) 11.5 (5.) 1.9 (6.0) 10.9 (.9) 11. (5.17) 1.0 (5.) 1. (6.) 11.8 (5.5)
8 CONDUCTOR SIZE DIMENSIONS INCHES (MM) APPROX. TUBING IPS L A B J JJ LBS. (KG) DSATL11G / (0.) (5.7) DSATL11G DSATL10G DSATL1G DSATL10G DSATL161G1 1-/-1 1- DSATL160G1 1-/-1 DSATL160G1 1-/-1 DSATL00G1-1 DSATL0G1-1 - DSATL00G1-1 DSATL0G1-1 - DSATL00G1-1 DSATL0G1 --1 DSATLG DSATL0G1 --1 DSATL0G1 --1 DSATL00G1-1 DSATL0G1-1 - DSATL00G1-1 DSATL0G1-1 - DSATL00G1-1 DSATL0G1 --1 DSATL00G1-1 CONNECTORS BOLTED ALUMINUM EXPANSION TO TUBE Continued 1 (0.) 1 (0.) 1-/8 (6.08) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1-1/ (6.5) 1 (0.) 1 (0.) 1- (.9) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1-/ (9.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1.5 DSATL00G1-1 (0.) (19.8) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015-1/ (8.55) -/ (95.5) -1/ (8.55) - - -/ (95.5) - -/ (95.5) -/ (95.5) -/ (95.5) 1.8 (5.81) 18.8 (8.5). (11.07) 16. (7.9) 1. (5.99) 1.9 (6.76) 16.8 (7.6) 1.8 (9.89) 8. (1.8) 8.9 (1.11) 0. (1.7) 6. (11.88) 5. (11.) 5.8 (11.70) 6. (11.98) 8. (1.88) 0. (9.1) 1.1 (9.57) 0.9 (1.0) 1. (1.). (15.60) 6.8 (16.69) 8.9 (17.6) 7
9 CONNECTORS BOLTED ALUMINUM WELDMENT EXPANSION TO TUBE ALUMINUM WSATL Aluminum alloy weldment, expansion stud connector for connecting aluminum tubing to equipment stud. Designed for ± one inch expansion. Specify H in catalog number (WSATLH-) if schedule 80 EHIPS tubing is to be used. Proper guide ball and lamination will be furnished. Copper clad aluminum transition plates are used between laminations and stud body. Stud body & cap bronze alloy Tubing body 56-T6 aluminum alloy Preformed laminated shunt aluminum Guide Ball aluminum alloy Shunt mounting hardware stainless steel 8 ALUMINUM CONDUCTOR SIZE IPS WSATL10G WSATL1G WSATL10G WSATL1G WSATL00G1-1 WSATL00G1-1 WSATL00G1-1 DIMENSIONS INCHES (MM) L A W 11-/8-8-1/ (117.8) (09.55) 11-/8-8-/8 (11.) (1.7) 11-/8 -/8 8- (111.1) (19.08) 11-/8-9-/8 (117.8) (8.1) /8 9 (95.8) (1.8) (8.6) (95.8) (11.) (1.) 11- -/ 1 (95.8) (95.5) (8.58) APPROX. LBS. (KG) 7.9 (.58) 8. (.76) 9.6 (.5) 11. (5.08) 1.6 (6.17) 15.1 (6.85) 16.9 (7.66) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
10 CONNECTORS BOLTED BRONZE TO CABLE BRONZE DSC Bronze alloy stud connector for connecting copper cable to equipment stud. Clamping bolts have hexstops for one-wrench installation. All sizes furnished with reversible cable caps. Castings Bronze Alloy Hardware Silicon Bronze or Stainless Steel Note: To specify 90 degree connector, insert 90 into catalog number. Example: DSC DSC #-Sol. 50-MCM DSC / - 16 #-Sol. 50-MCM DSC #-Sol. 50-MCM DSC /0-Sol. 500-MCM DSC /0-Sol. 800-MCM DSC #-Sol. 50-MCM DSC #-Sol. 50-MCM DSC /0-Sol. 500-MCM DSC /0-Sol. 800-MCM DSC / - 1 #-Sol. 50-MCM DSC / - 1 1/0-Sol. 500-MCM DSC / - 1 /0-Sol. 800-MCM DSC / - 1 /0-Str MCM DSC #-Sol. 50-MCM DSC /0-Sol. 500-MCM DSC /0-Sol. 800-MCM DSC /0-Str MCM DSC MCM Continued on next page. COPPER CONDUCTOR RANGE DIMENSIONS INCHES (MM) APPROX. CABLE DIA. L A B W J LBS. (KG) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 5-1/ (1.5) 5-1/8 (10.18) 5-1/8 (10.18) 5-/8 (16.5) 5-/8 (16.5) 5-1/8 (10.18) 5-1/ (1.5) 5- (19.7) 5- (19.7) 5-1/ (1.5) 5- (1.88) 5- (19.7) 6-/8 (161.9) 5-1/ (1.5) 5- (19.7) 5-/8 (16.5) 6-1/ 8 (0.) -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ (8.55) - (66.68) - (6.5) - (6.5) -/ -/ - (6.5) - (6.5) -/ -/ - (6.5) -/ -/ - - (6.5) -/ -/ - - (11.) (7.6) (7.6) (7.6) -1/8 (5.98) -7/8 (7.0) (7.6) -/8 (60.) - (6.5) -7/8 (7.0) (7.6) -1/8 (5.98) -7/8 (7.0) -/8 (60.) (7.6) - (6.5) -7/8 (7.0) -7/8 (7.0) -1/8 (79.8) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) 1.9 (.86).0 (.91).6 (1.18).7 (1.).6 (.09). (1.0).7 (1.68). (1.95).7 (.1).8 (1.7).5 (.0) 5. (.5) 5.5 (.9).6 (1.6) 5.0 (.7) 5.5 (.9) 6.0 (.7) 6.6 (.99) 9 ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
11 CONNECTORS BOLTED BRONZE TO CABLE (CONTINUED) 10 DSC / -1 1/0 Sol. 500 MCM DSC / -1 /0 Str MCM DSC /0 Sol. 800 MCM DSC /0 Str MCM DSC MCM DSC MCM DSC /0 Sol. 800 MCM DSC /0 Str MCM DSC /0 Str MCM DSC MCM COPPER CONDUCTOR RANGE DIMENSIONS INCHES (MM) APPROX. CABLE DIA. L A B W J LBS. (KG) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 5- (19.7) 6-1/ 5- (19.7) 6-/ (171.5) 6-7/8 (17.6) 6-/ (171.5) 7-/8 (187.) 7- (19.68) -1/ -1/ -1/ -1/ -1/ -1/ -/ -/ -1/ (8.55) -1/ (8.55) -/ - -/ - -/ (95.5) -/ - - -/ (95.5) - (6.5) -7/8 (7.0) -7/8 (7.0) -/8 (85.7) -/8 (85.7) -7/8 (7.0) -7/8 (7.0) -/8 (85.7) /8 (9.5) 5.6 (.5) 6. (.86) 6.0 (.7) 6.9 (.1) 8.6 (.90) 8.7 (.95) 7.8 (.5) 8.0 (.6) 10. (.67) 1.0 (5.) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
12 CONNECTORS BOLTED BRONZE TO CABLE OR TUBE BRONZE DS Bronze alloy stud connector for connecting copper cable or tube to equipment stud. A wide range of cable or a limited range of tubing may accommodate a straight or 90 degree connection. Casting Bronze Alloy Hardware Silicon Bronze or Stainless Steel DS /-16 #6 Sol. 500 MCM DS /-16 # Sol MCM DS #6 Sol. 50 MCM DS #6 Sol. 500 MCM DS # Sol MCM DS #6 Sol. 50 MCM DS #6 Sol. 500 MCM DS # Sol MCM DS COPPER CONDUCTOR RANGE DIMENSIONS INCHES (MM) APPROX. CABLE CABLE DIA. TUBING IPS L A B W J LBS. (KG) /0 Sol. 000 MCM DS /-1 #6 Sol. 50 MCM DS /-1 #6 Sol. 500 MCM DS /-1 # Sol MCM DS #6 Sol. 50 MCM DS #6 Sol. 500 MCM DS # Sol MCM DS DS /-1 /0 Sol. 000 MCM /0 Sol. 000 MCM DS # Sol MCM DS /0 Sol. 000 MCM ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) /8 - /8 - / - /8 - / /8 - /8 - / /8-1-1/ /8 - /8 - / /8 - /8 - / /8-1-1/ /8-1-1/ /8 - / /8-1-1/ -7/8 (1.8) 5- (1.88) - (11.) -7/8 (1.8) 5- (1.88) - (117.8) -7/8 (1.8) 5- (1.88) 6-1/ - (117.8) -7/8 (1.8) 5- (1.88) - (11.) 5 (17.0) 5- (1.88) 6-1/ 6-1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ (7.6) -1/ (7.6) -1/ -/8 (85.7) (7.6) -1/ (7.6) -1/ -/8 (85.7) -/8 (85.7) -/8 (85.7) -/8 (85.7) -1/ (7.6) -1/ (7.6) -1/ -/8 (85.7) (7.6) -1/ (7.6) -1/ -/8 (85.7) -/8 (85.7) -/8 (85.7) -/8 (85.7) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5).9 (1.) 5. (.5).8 (1.7).9 (1.) 5.9 (.68).7 (1.). (1.5) 5.9 (.68) 8. (.81). (1.50).7 (1.68) 6.5 (.95).6 (1.6).9 (1.77) 7.0 (.18) 9.1 (.1) 9. (.) 9. (.17) 9.5 (.1) 11 ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
13 BRONZE DS CONNECTORS BOLTED BRONZE TO TWO CABLES OR TUBES Bronze alloy stud connector for connecting two copper cables or tubes to equipment stud. A wide range of cable or a limited range of tubing may accommodate straight or 90 degree connections. Clamping bolts have hex-stops for one-wrench installation. Casting Bronze Alloy Hardware Silicon Bronze or Stainless Steel 1 DS /-16 #6 Sol. 500 MCM DS #6 Sol. 500 MCM DS # Sol MCM DS #6 Sol. 500 MCM DS # Sol MCM DS / -1 # Sol MCM DS #6 Sol. 500 MCM DS # Sol MCM DS /0 Sol. 000 MCM DS / - 1 # Sol MCM DS # Sol MCM DS /0 Sol. 000 MCM DS /0 Sol. 000 MCM COPPER CONDUCTOR RANGE DIMENSIONS INCHES (MM) APPROX. CABLE CABLE DIA. TUBING IPS L A B W J LBS. (KG) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) /8 - /8 - /8- / /8 - /8 - / /8- / /8 - /8 - / /8-1-1/ /8- / /8- / /8-1-1/ /8-1-1/ -7/8 (1.8) -/ (10.65) 5-/ (16.05) -7/8 (1.8) 5- (1.88) 5- (1.88) -7/8 (1.8) 5-/ (16.05) 5-/ (16.05) 6 (15.) 6-1/ 7-1/8 (180.98) -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ -1/ (8.55) -1/ -1/ -1/ -1/ -/8 (85.7) -/8 (85.7) -/8 (85.7) -1/ -1/ -1/ -1/ -/8 (85.7) -/8 (85.7) -/8 (85.7) /8 (9.5) /8 (9.5) /8 (9.5) /8 (9.5).9 (1.). (1.5) 7.0 (.18).5 (1.59) 7.1 (.) 7. (.1). (1.95) 7.7 (.9) 10.7 (.85) 7.9 (.58) 8.7 (.95) 11.1 (5.0) 1.9 (6.76) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
14 CONNECTORS BOLTED BRONZE TO TUBE Bronze alloy stud connector for connecting copper tubing to equipment stud. Clamping bolts have hex-stops for one-wrench installation. BRONZE DST Castings Bronze Alloy Hardware Silicon Bronze or Stainless Steel Note: To specify 90 degree connector, add 90 into catalog number. Example: DST CONDUCTOR SIZE DST / DST / DST DST DST / DST DST / DST DST DST / DST DST001-1 DST DIMENSIONS INCHES (MM) TUBING IPS L A B W J 5-1/ (1.5) 5- (1.88) 5 (17.0) 5- (19.7) 5-1/ (1.5) 5-1/ (1.5) 5-1/ (1.5) 5- (19.7) 5- (19.7) 5- (1.88) 5- (1.88) 5- (1.88) - (6.5) -/ - (6.5) -/ - (6.5) - (6.5) - (6.5) -/ -/ -/ -/ -7/8 (7.0) -1/ (8.55) -1/ (8.55) - (9.08) - (6.5) -/ (95.5) -1/ (8.55) -1/ (8.55) - (9.08) -7/8 (98.) - (9.08) -1/8 (79.8) -/ (95.5) - (11.) /8 (9.5) /8 (9.5) APPROX. LBS. (KG) 5.0 (.7) 5. (.0).9 (.) 5. (.5) 5.5 (.9) 5.8 (.6) 6.1 (.77) 6.8 (.08) 7. (.1) 7.0 (.18) 7.7 (.9) 8.5 (.86) 1.9 (5.85) 1 ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
15 BRONZE DSTL CONNECTORS BOLTED BRONZE EXPANSION TO TUBE Bronze alloy expansion stud connector for connecting copper tubing to equipment stud. Castings Bronze Alloy Factory formed laminated shunts copper (tinned contacts) Hardware Stainless Steel or Silicon Bronze Notes: (1) To specify braided shunt, replace L in catalog number with the letter F. Example: DSTF1110G1 () To specify 90 degree connector, add 90 to catalog number. Example: DSTL110G901 1 DSTL101G / DSTL101G DSTL1110G1 1-1/8-1 1 DSTL111G1 1-1/ / DSTL111G1 1-1/ DSTL110G1 1-1/8-1 DSTL11G1 1-1/8-1 - DSTL106G1 1-1/ -1 / DSTL106G / DSTL110G DSTL11G / DSTL11G DSTL10G DSTL1G DSTL00G1-1 Continued on next page. CONDUCTOR SIZE DIMENSIONS INCHES (MM) APPROX. TUBING IPS L A B J JJ LBS. (KG) 1 (0.8) 1 (0.8) 1 (0.8) 1 (0.8) 1 (0.8) 1 (0.8) 1 (0.8) 1- (17.5) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1.0 (5.) 1.8 (5.81) 1.5 (5.67) 1.8 (6.6) 1.1 (6.0) 18.7 (8.8) 19. (8.80) 1.8 (5.81) 1.1 (6.0) 19.5 (8.8) 0.5 (9.07) 1.7 (9.8).8 (10.) 7.0 (1.5).0 (10.89) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
16 CONNECTORS BOLTED BRONZE EXPANSION TO TUBE (CONTINUED) DSTL0G1-1 - DSTL00G1-1 DSTL0G1-1 - DSTL01G DSTL00G1-1 DSTL0G1-1 - DSTL00G1-1 CONDUCTOR SIZE DIMENSIONS INCHES (MM) APPROX. TUBING IPS L A B J JJ LBS. (KG) 1 (0.) (7.0) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 1 (0.) 6.7 (1.11) 1.8 (1.) 6. (18.) 7.9 (1.66) 1. (1.15) 6. (16.7). (19.) 15 ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
17 BRONZE HDSF CONNECTORS BOLTED BRONZE TO FLAT BAR Bronze alloy stud connector for connecting copper flat pad to copper stud. Tongue holes have NEMA hole spacing with contact surface on both sides. Casting Bronze Alloy Hardware Silicon Bronze or Stainless Steel Note: To specify 90 degree connector, insert 90 into catalog number. Example: HDSF Fig. FIG. NO. FLAT BAR WIDTH HDSF06116 / DIMENSIONS INCHES (MM) L A B T J K -1/ 1/ /8 (8.55) (6.5) (9.5) APPROX. LBS. (KG).1 (.95) 16 HDSF06116 / -16 HDSF / (8.55) -1/ (8.55) 1/ (6.5) /8 (9.5) /8 (9.5) /8 (9.5). (1.0).1 (1.1) HDSF / -1/ (8.55) /8 (9.5) /8 (9.5). (1.50) HDSF / (8.55) /8 (9.5).9 (1.) HDSF / (8.55) /8 (9.5).5 (1.59) HDSF111D /8 (180.98) /8 (9.5) (8.58) 5.1 (.1) HDSF / /8 (161.9) -1/ (8.55) /8 (9.5).6 (1.6) HDSF / -1 6-/8 (161.9) -1/ (8.55) /8 (9.5).8 (.18) HDSF11D81 1-1/ / (18.15) /8 (9.5) (8.58) 5. (.0) HDSF /8 (161.9) -1/ (8.55) /8 (9.5).0 (1.81) HDSF /8 (161.9) -1/ (8.55) /8 (9.5). (1.95) HDSF11D /8 (187.) (8.58) 5. (.6) HDSF /-1 6-/8 (161.9) -1/ (8.55) 5.9 (.68) HDSF161D11 1-/-1 Continued on next page. 7-/8 (187.) (8.58) 6.6 (.99) ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
18 CONNECTORS BOLTED BRONZE TO FLAT BAR (CONTINUED) FIG. NO. FLAT BAR WIDTH HDSF DIMENSIONS INCHES (MM) L A B T J K 6-/8-1/ (161.9) (8.55) APPROX. LBS. (KG) 5.5 (.5) HDSF01D /8 (187.) (8.58) 7. (.1) HDSF111-1/ -1 6-/8 (161.9) -1/ (8.55) 6.7 (.0) HDSF1D11-1/ -1 7-/8 (187.) (8.58) 10. (.6) HDSF /8 (17.6) - (6.5) -1/ (8.55) 7.8 (.5) HDSF1D /8 (00.0) - (6.5) (8.58) 10.9 (.9) HDSF01D1-1 8-/8 (1.7) / (19.05) 1.6 (6.17) HDSF1D1-1/-1 8- (19.08) / (19.05) 1. (6.) HDSF01D11-1 HDSF501D (8.6) (1.8) - (9.08) - (89.9) 1 (5.) 1 (5.) (8.58) (8.58) 19 (8.6) 5.5 (16.1) 17 ANDERSON HUBBELL POWER SYSTEMS FARGO January 015
EHV CONNECTORS EHV TERMINALS ACFS (EHV)... ALUMINUM BOLTED TUBE TO FLAT PAD, SHORT...EHV-7
CONNECTORS TERMINALS ACF ()... BOLTED TUBE TO FLAT PAD...- ACFS ()... BOLTED TUBE TO FLAT PAD, SHORT...-7 CCL-... COMPRESSION TUBE TO FLAT PAD...- CCLS-... COMPRESSION TUBE TO FLAT PAD, SHORT... - EVKET...
More informationEHV SUBSTATION END BELLS
EHV SUBSTATION END BELLS EHV BOLTED END BELLS FOR TUBE TYPE HVTEB/EVTEB Aluminum alloy tubular end bells are corona free at 35 and 500 KV levels respectively. The spheres are finished free of nicks, burrs
More information25-kV Apparatus Bushings B Series (bolt-in) for Elbow to Air-Insulated Service 200 Amp, 600 Amp and 1250 Amp
Page 1 2015 Grounded Metal Equipment Plate Equipment Connection Bus Bar or Other Component 15 kv or 25 kv Separable Insulated Connector (elbow) Equipment Connection Power Cable Power Cable Grounded Metal
More informationF-Series Camera Mounting Accessories
F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationVertical Break Parallel (VBP) / Vertical Break Slant (VBS)
August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers
More informationI-Line. Accessories. Essential cable installation products for corrugated, smooth wall, and braided cables
I-Line TM Essential cable installation products for corrugated, smooth wall, and braided cables Installation Coaxial cable installation components for corrugated, smooth wall and braided cables Proven
More informationCDGRD-10. Grounding. Solutions For Comm/Data Applications
CDGRD-10 Grounding Solutions For Comm/Data Applications Overview & Table of Contents Cooper B-Line s Grounding products for rack & runway provide a complete solution for grounding metal supports. The offering
More information3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form
3M Mobile SkyWalk Series Horizontal Lifeline Product Return Form THIS FULLY COMPLETED DOCUMENT MUST BE INCLUDED WITH EACH RETURN SHIPMENT IN ORDER FOR CREDIT TO BE ISSUED. ALL CREDITS WILL BE ISSUED TO
More informationOUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd
OUTDOOR DISCONNECTORS A division of ACTOM (Pty) Ltd ACTOM OUTDOOR DISCONNECTORS Single Side Break (SSB) Disconnector 22-132 kv, 800-1 A, 25 ka - 3s Typical bearing assembly. Voltage range 11 kv to 132
More informationNORTH ORANGE COUNTY COMMUNITY COLLEGE DISTRICT SECTION 27 05 26 GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS
SECTION GROUNDING AND BONDING FOR COMMUNICATION SYSTEMS RELATED SECTIONS: Section 27 00 00 General Requirements Section 27 02 00 Communication General Requirements Section 27 05 28 Pathways for Communications
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationBolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
More informationCT-02 CABLE TRAY SYSTEMS
CT-02 CABLE TRAY SYSTEMS SYSTEMS THAT MAKE SENSE Introduction B-Line Systems was formed in 96 and has over 30 years experience manufacturing cable tray systems in which it has grown to become the industry
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
More informationBNC, N, TNC Connectors
BNC, N, TNC Connectors ONLINE CATALOG AEP BNC, N, and TNC series connectors are specifically designed for use with miniature flexible and semi-rigid cable. They are available with goldplated or nickel-plated
More informationB. Related Sections: 1. Section 26 05 33 - Raceway and Boxes for Electrical Systems.
SECTION 262726 - WIRING DEVICES PART 1 - GENERAL 1.1 SUMMARY A. Section includes wall switches; wall dimmers; receptacles; multioutlet assembly; and device plates and decorative box covers. B. Related
More informationROOF DRAINS TABLE OF CONTENTS
Pictorial Index Product Recommendations Roof Drain Selection Factors Sizing Placement Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations TABLE OF CONTENTS ROOF
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationSECTION 4: Cable Ladder Stainless Steel & Aluminium
SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General
More informationPOLE MOUNT SYSTEM-3 INSTALLATION
1 May 2014 POLE MOUNT SYSTEM-3 INSTALLATION The Pole Mount System-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker products to be mounted to pole structures. The only
More informationCat. No. Material Siderail Height. Designed to lock into place for easy alignment and installation. ABW-4-SSP
Metallic Snap-In Splice Plate Designed to lock into place for easy alignment and installation. Packaged in pairs with zinc plated hardware. Provided as standard with each straight and fitting. Cat. No.
More informationI BEAM TRACK INSTALLATION
PDQ 0/700 FESTOON SYSTEM INSTALLATION AND MAINTENANCE INSTRUCTIONS INTRODUCTION The PDQ Festoon System was designed to run on one of three sizes of I-beams: S x., S8 x 8. and S x.. System trolleys must
More informationCOAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
More informationChapter 5 FLOOR LOADING AND WEIGHTS
Chapter 5 FLOOR LOADING AND WEIGHTS Section 1.0 Floor Loading Section 2.0 Seismic Data The CT system has a total floor load of approximately 6660 lbs (3021 kg). About 5050 lbs (2291 kg), including patient
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationStandard Buccaneer - USB
IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling PCB versions Dust and waterproof sealing when mated
More informationCable Runways & Accessories
SB17U SB13AL SB17 SB17T SB117 SB17HRB SB2107 SB2101A SB17VRB SB2110A SB2129 SB2129SD SB130 SB2221 SB126 SB2118 SB119 SB2105 113 Cooper B-Line manufactures a wide variety of high quality cable pathway products
More informationCable Accessories. for Extruded Dielectric Cable 69kV - 230kV Rated. Catalog Python13
Cable Accessories for Extruded Dielectric Cable 69kV - 230kV Rated Components used in cable systems 100% Tested Factory Molded For outdoor applications through 230kV For gas insulated substations and transformers
More informationFLEXIBLE COPPER & ALUMINIUM CONNECTIONS. Product Range 1 VGL - ALLIED CONNECTORS
Product Range ROUND STRANDED COPPER CABLE Electrolytic Copper / Oxygen Free Copper Conforms to DIN 46438 Standards Finish: Bare Copper / Tinned / Silver-plated ROUND BRAID / ROUND STRANDED CABLE WITH OVERALL
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More informationItem No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationPOLE MOUNT SYSTEM EX-3 INSTALLATION
May 2014 POLE MOUNT SYSTEM EX-3 INSTALLATION The Pole Mount System EX-3 is an easy to install and flexible system designed to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures. The
More informationTERMINATION ENCLOSURE OPTIONS
TERMINATION ENCLOSURE OPTIONS Add suffix: R - Reverse Stagger the Bus Bars (to run cable in from the top) CU - Copper NEMA Mount Bus Bars C - Plastisol Covers for Bus Bars DF - Dead Fronts T - Tin Plated
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationContact-Systems and Accessories for Anodising and Electroplating Equipment
Contact-Systems and Accessories for Anodising and Electroplating Equipment 2000 Table of Contents Description Page High Current Contacts and Accessories for Rack Systems Contact Saddles Standard 250-3000
More informationUltrasonic Reference Blocks
Ultrasonic Reference Blocks Custom and Standard Test Blocks for Nondestructive Testing Introduction 3 IIW Type 1 Calibration Block 4 Miniature Angle Beam (ROMPAS) Calibration Block 4 Distance Calibration
More informationCA-6050 Solar Power Unit. User Guide. Designed to work with the Norsonic range of sound level meters to provide a DC supply in remote locations.
CA-6050 Solar Power Unit User Guide Designed to work with the Norsonic range of sound level meters to provide a DC supply in remote locations. 1 Contents Introduction... 2 Components... 3 Solar Array Case...
More informationLIEBERT VNSA Installation Sheet
LIEBERT VNSA Installation Sheet Description The Liebert vnsa network switch is designed for connecting multiple Ethernet-ready devices and comes in various models. The unit may have: A Liebert icom display
More information1 1.5" (38 mm) Diameter
CAB Cable Rings and Saddles are offered in all sizes and materials. Please call or email if your preferred item is not listed on these charts. TABLE OF CONTENTS Part Numbers for 1.5 inch (38mm) diameter
More informationType NT and Type ZWM Terminal Blocks
Type NT and Type ZWM Terminal Blocks Side view of closed Sliding Link Block Sliding Link Block with white marker strip Unit-pole construction Sliding link to permit testing without disturbing wiring High
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationSemi-rigid Coaxial Cables
50 Ohm RF Coaxial Cables Semi-rigid Coaxial Cables SR034 SR047/M17 SR086 /M17 SR086-25 SR086-75 SR090-25 SR141 SR141-25 SR141-35 SR141-75 SR250 SR250-75 147 Semi-rigid Coaxial Cabless SR034 Inner conductor
More informationENGINEERING COMMITTEE
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 02 2006 Specification for F Port, Female, Indoor NOTICE The Society of Cable Telecommunications Engineers (SCTE)
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12 14tel: 061307-3801. E-mail:pzoli@kiralytrading.hu agi@kiralytrading.hu. Hinges
355 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More information1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
More informationBERTHOLD ELECTRIC GENERATOR CONNECTION CABINET
BERTHOLD ELECTRIC GENERATOR CONNECTION CABINET Berthold Electric Company s Generator Connection Cabinet provides a quick and convenient station to connect a portable generator to a facility s main service
More informationInstallation instruction CASAFLEX - Connecting piece DN 100
1 CASAFLEX - 11 10 114,3 x 4,5 3 5 2 4 1 7 6 8 12 9 Do not begin work until you have read the installation instruction carefully. 1 internal backing sleeve 2 graphite packing 3 connecting piece 4 thrust
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationExclude all sales to foreign countries and all sales or transfers to other divisions or plants of your company. Survey Form 3.3.
(703) 81-3200 Electrical Connector Section - Underground Distribution Type Cable Connectors and Accessories Voting Classification (8-CC-IV) Domestic Net Sales Billed of Connectors for Residential and Medium
More informationPOLARIS INSUL-TAP CONNECTORS FOR TWO WIRES & IN-LINE SPLICERS/REDUCERS
INSUL-TAP CONNECTORS FOR TWO S & IN-LINE SPLICERS/REDUCERS IT SERIES 1 2 3 4 Insul-Tap connectors are suitable for connecting two wires. For sizes 3/0 AWG and smaller, they are available in two styles
More informationCluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11
Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU
More informationCONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
More informationRAY-MAX Integrated Solar Power Strip
RAY-MAX Integrated Solar Power Strip 600008, 600009, 600010, 600208, 600209, 600210 Owner s Manual NEXTRONEX, INC. Revision Date: 10/27/14 Contents 1. Safety Instructions... 3 2. General Equipment Warnings...
More informationSmall Flat Panel Lift Arm FSA-1004 and KSA-1004
I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows
More informationClad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
More informationHigh Pressure Equipment Pressure Vessels and Reactors Index
Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard
More information9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog
9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G Catalog January 07 Contents Commercial Pressure Switches Pressure Switches b Selection..............................................
More informationSpecifications. S&C Power Fuses Types SM and SMLa. For use with SM Refill Units or SMU Fuse Units. Indoor Distribution (4.16 kv through 34.
S&C Power Fuses s SM and SMLa Indoor Distribution (4.16 through 34. ) For use with SM Refill Units or SMU Fuse Units Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More informationTakfan Machinery and Mould Co Ltd. Plug in Bushing. LV Monoblock. RMU Bushing. 4 Way CT Terminal. www.takfanmakina.com.tr
www.takfanmakina.com.tr Plug in Bushing LV Monoblock RMU Bushing 4 Way CT Terminal Solution Partner of Medium Voltage Insulation and Epoxy Casting Design *Medium voltage Switching Equipments Design *Load
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationTerminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
More information5.2. Overview. The better method to install solderless compression connectors on power cable
5.2 Overview The better method to install solderless compression connectors on power cable The Thomas & Betts method of installing compression connectors on power cables is designed to provide a high degree
More informationSTB Series Enclosures
STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard
More informationInstallation Instructions:
Portable Guardrail System Model Numbers: 7900060, 7900061, 7900062, 7900063 Installation Instructions: Portable Guardrail System This instruction is intended to meet the Manufacturer s Instructions requirement
More informationAMP Standard Terminals and Splices. RoHS. Ready
AMP Standard Terminals and Splices RoHS Ready Table of Contents Product Facts Solderless terminals and splices performs up to today s standards for reliable termination in applications ranging from control
More informationSMA Connectors. RF Coax Connectors. Product Facts
SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationAmerican National Standard. Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit, Electrical Metallic Tubing, and Cable
ANSI/NEMA FB 1-2012 Revision of ANSI FB 1-2007 American National Standard Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit, Electrical Metallic Tubing, and Cable Secretariat: National Electrical
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationFlexible Circuit Simple Design Guide
Flexible Circuit Simple Design Guide INDEX Flexible Circuit Board Types and Definitions Design Guides and Rules Process Flow Raw Material Single Side Flexible PCB Single Side Flexible PCB (Cover layer
More informationCABLE TRAY. Introduction
Introduction BLE TRAY ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according to the following specifications and standards:
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationSECTION 27 05 36 CABLE TRAYS FOR COMMUNICATIONS SYSTEMS
SECTION 27 05 36 CABLE TRAYS FOR COMMUNICATIONS SYSTEMS PART 1 GENERAL 1.01 DESCRIPTION A. The work covered by this section of the Specifications includes all labor necessary to perform and complete such
More informationSECTION 11014 WINDOW WASHING SYSTEMS
SECTION 11014 WINDOW WASHING SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes, but is not limited to, design and furnishing portable davits, davit sleeves, dvit bases, four (4) removable outriggers,
More informationUpgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions
Upgrading a GainMaker Line Extender from a Line-Powered Source to a 120 V AC-Powered Source Installation Instructions Overview Audience These installation instructions are intended for all cable system
More informationTires and Wheels. Tires and Wheels. Common Tire Terms. Determing Wheel Offset. Determing Bolt Pattern. Dual Wheel/Rim Spacing
ommon Tire Terms Section : Aspect Ratio: Range: Overall Diameter: Static Radius: Design : width of a tire in millimeters measured on a rim with optimal width. A dimensional relationship of the tire s section
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationCaps STANDARD WEIGHT Inches / Pounds
Standard Caps you are here: Home > Weldbend Catalog > Fittings > Caps Caps STANDARD WEIGHT Inches / Pounds For Metric Units >Click Here Nominal Pipe Size Outside Inside Wall Thickness (T) Length (E) Pipe
More informationSECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
More informationTECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
More informationSTANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
More informationFRAME PROFILE MASONRY METAL DOOR FRAME FLUSH MASONRY KD MITER CORNER JOINT. #8 Screw (MS002485) Required on all fire rated KD frames. Bend Tabs.
FRAME PROFILE MASONRY FLUSH MASONRY KD MITER CORNER JOINT Bend Tabs Head #8 Screw (MS002485) Required on all fire rated KD frames Corner Assembly 2" (50.8) Head Jamb Head Break Away Corner Clip Spot Welds
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS
Prepared by: ABB1 ELECTRICAL SERVICE REQUIREMENTS FOR MOBILE HOME DEVELOPMENTS 052521 Asset Type: Electric Metering Function: Construction Issued by: Quoc Hoang (QxH1) Date: 07-01-16 Rev. #06: This document
More information2014 PRODUCT SPEC GUIDE
2014 PRODUCT SPEC GUIDE THE LIGHTWEIGHT INNOVATION LEADER INNOVATION IS IN OUR DNA This year, Alcoa is launching technology that s ready to shatter industry HEAVY-DUTY WITHOUT THE HEAVY. standards. But
More informationEDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
More informationSECTION 16461 DRY-TYPE TRANSFORMERS
SECTION 16461 PART 1 - GENERAL 1.1 SECTION INCLUDES A. Furnishing and installation of and testing of cast resin dry type MV/LV distribution transformer in accordance with specifications and drawings. Any
More informationINSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS GENERAL DESCRIPTION:
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationHID/FLOODLIGHT: ATEX/IECEx FLAMEPROOF. Applications
Applications Powerful, efficient floodlights for large areas such as industrial complexes and ship loading areas. Rated for use in hazardous areas. Features Highly efficient, integrally ballasted floodlight.
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
More informationDonut Robot Mark I Mark VI
The worldwide leader in donut production equipment +1.206.322.5474 info@belshaw.com www.belshaw.com AUTOMATIC FRYERS Donut Robot Mark I Mark VI Donut Robot Series Automatic Fryers deposit, fry, turn, and
More informationSealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System
Revised Sept--22-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Description The sealed circular RJ45 connector system is designed for use in harsh environments. The connector
More information08. SEK IDC CONNECTORS
. IDC CONNECTORS connectors for flat cables enable simple and, cost-optimized device configuration. connectors are preferably used for connection within the device. HARTING offers a broad range of these
More information