V Series Control Port Ball Valves

Size: px
Start display at page:

Download "V Series Control Port Ball Valves"

Transcription

1 Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard V notch options are 3, 6 & 9. While they are available as manual valves, we specialize in automating them to suit your particular control requirements. CONTROLS V Series Control Port Ball Valves s 1/2-4, 3-Piece (V7, V8) s 1/2-6, 15# Flanged (V9) s 1/2-6, 3# Flanged (FVD9) 316SST or WCB 3, 6 & 9 V Notch Standard Others on Request V SERIES Control Port Ball Valves Lock Saddle Stem Nut Belleville Washer Gland Chevron Packing Pyramidal (45 ) Stem & Stem Seal Bushing Viton O-ring (Other material available; not on V7) Anti-Static Device Germany Patent No United States Patent No. 5,954,88 China Patent No. ZL HOW TO ORDER MANUAL VALVES SAMPLE PART # V8C-TH-2-XXX Easy to Automate! See automated data sheets for pre-sized assemblies V Port Valve Series Carbon Steel Threaded Ends Valve Seat Material Special Designation Additional Special Designation (3, 6, or 9 v-ball) See part number matrix for itemized options Pneumatic Electric 9955 International Blvd. Cincinnati, Ohio PHONE (513) FAX (513)

2 V Series V7 V7 3-Piece Flow Coefficients - Cv Chart Valve Ball Angle % 15% 2% 3% 4% 5% 6% 7% 8% 9% 1% / / / / FL Xt Valve Standards V7 3-Piece Design ANSI/ASME B16.34 End Connections ANSI/ASME BPE-1997/2 Pressure Testing API 598 Mounting ISO 5211 Marking System for Valves MSS SP-25, ISO 529 CE Approval PED 97/23/EC Module H Safety Integrity IEC 6158:21; SIL 3 Material Certification EN MTR Quality Assurance ISO 91:28 2

3 V Series V8/V9 V8 3-Piece & V9 Flanged Flow Coefficients - Cv Chart Valve 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 6" Ball Angle % 15% 2% 3% 4% 5% 6% 7% 8% 9% 1% ,48 FL Xt Valve Standards V8 3-Piece Design ANSI/ASME B16.34 End Connections ASME B16.25, B1.2.1, B16.11 Pressure Testing API 598 Mounting ISO 5211 Marking System for MSS SP-25, ISO 529 Valves Safety Integrity IEC 6158:21; SIL 3 Material Certification EN MTR Quality Assurance ISO 91:28 V9 Class 15 Flanged Design ANSI/ASME B16.34 Face to Face ANSI/ASME B16.1 Flange Dimensions ANSI/ASME B16.5 Pipeline Valves API 6D Pressure Testing API 598 Mounting ISO 5211 Marking System for MSS SP-25 Valves Safety Integrity IEC 6158:21; SIL 3 Material Certification EN MTR Quality Assurance ISO 91:28 FVD9 Class 3 Flanged Design ANSI/ASME B16.34 Face to Face ANSI/ASME B16.1 Flange Dimensions ANSI/ASME B16.5 Pipeline Valves API 6D Pressure Testing API 598 Fire Testing API 67 6th Ed. on 1/2-4 SST & WCB and 6 WCB; API-67 4th Ed. on 6 SST Sulfide Stress Protection NACE MR175 Coast Guard Approved Category A: 46 CFR (b)(2) Safety Integrity IEC 6158:21; SIL 3 Mounting ISO 5211 Marking System for MSS SP-25 Valves Material Certification EN MTR Quality Assurance ISO 91:28 3

4 V Series Custom Cut 3 V-Port 6 V-Port 9 V-Port Note: May be customized; call factory for flow analysis design. Triac V port control valves are available with 3, 6, & 9 V-notch options. V-port valves offer better and more consistent control than traditional round ported ball valves. We offer this valve with the control port cast and machined into the ball, not in the seat. This allows for much better flow characteristics and eliminates the need to replace seats. The 3 option allows for finer tapered control throughout the valve rotation, and the 6 & 9 offer a larger Cv in addition to controlled flow. The PTFE seat is standard in the V7 valves, while the 5/5 STFE seat is standard with V8, V9, and FVD9 V-port valves. The 5% SST powder and 5% PTFE offers both strength and superior sealing properties. 4

5 77 Series 3-Piece Sanitary End Ball Valve Tube Pipe for Design Valves 1/2 to 4 Pressure vs Temperature Chart With or without cavity filler 24 Grit Internal Polish Standard (15-2 RA) V Series V7 PRESSURE IN PSIG Pressure vs. Temperature Chart for PTFE Seats -2 (-28) (-18) 1 (38) 5 C PTFE 2 3 (93) (149) 4 (24) TEMPERATURE IN F ( C) 1/2"~2" 2-1/2 ~4" 5 (26) (316) PRESSURE IN BAR V7 Series 3-Piece V-Port Control Valve Breakaway Torques for PTFE Non-Cavity Filled CONSULT FACTORY FOR OTHER SEAT MATERIALS MATERIALS LIST Cavity Filled 1/2" /4" 9 1 1" /2" " /2 86 1, ,75 4 1,317 1,4 NO. PART NAME QTY. MATERIAL 1 BODY 1 GRADE CF3M 2 END CAP 2 GRADE CF3M ASTM A276 GRADE CF3M 4 SEAT 2 PTFE 5 JOINT GASKET 2 PTFE 6 STEM SEAL 1 PTFE 7 STEM 1 ASTM A276 SS 316L 8 GLAND PACKING 1 PTFE 9 GLAND WASHER 1 RTFE 1 GLAND BUSHING 1 AISI BELLEVILLE WASHER 2 AISI LOCK SADDLE 1 AISI STEM NUT 2 AISI STEM WASHER 1 AISI HANDLE 1 AISI HANDLE LOCK 1 AISI HANDLE SLEEVE 1 VINYL 18 BODY BOLT # ** 19 BODY BOLT NUT & ## 2 WASHER & AISI STOP BOLT 1 AISI BOLT NUT 1 AISI ANTI-STATIC DEVICE 2 AISI 316 # FOR 1/ PCS ; FOR 4-6 PCS & FOR 1/ PCS ; FOR 2-1/ PCS; FOR 4-12 PCS **FOR 1/2-2 - ASTM A193 GRADE B8; FOR 2-1/2-4 - ISO A2-7 ## FOR 1/2-2 - ASTM A194 GRADE 8; FOR 2-1/2-4 - ISO A2-7 DIMENSIONS (IN) Tube O.D. according to ASME BPE 1997/2 SIZE A B C D DD1 DD2 E F L L1 P2 S U V Z1 Z2 AC AD (LBS) ISO /2" F3/F4 3/4" F3/F4 1" F4/F5 1-1/2" F5/F F5/F7 2-1/ F7/F F7/F1 4" F7/F1 5

6 PRESSURE IN PSIG V Series V V8 Series 3-Piece V-Port Control Valve -2 (-28) (-18) Pressure vs. Temperature Chart for Valves 1/4 to 4 1 (38) 5 C PTFE 1/4"~1" RTFE 1-1/4"~2" (93) (149) (24) TEMPERATURE IN F ( C) 2-1/2"~4" 5/5 STFE 5 (26) (316) High Performance, Full Port 3-Piece Ball Valve ISO 5211 Direct Mount PRESSURE IN BAR NOTE: Dotted line shows the rating for valve body. Solid line shows the rating for valve seat. Both ratings need to be considered when determining the limitation of the valve for specific application. Consult factory for other seat materials MATERIALS LIST V8 Torque Values for 5/5 STFE Seats Torque (In-lbs) 1/2" 9 3/4" 12 1" /4" /2" 38 2" /2" 85 3" 1,3 4" 1,8 NOTE: 3% SAFETY FOR LUBRICATING 285 PSID NO. PART NAME QTY STAINLESS STEEL CARBON STEEL 1 BODY 1 2 TH END CAP 2 2 BW/SW END CAP 2 1/15/2 psi WOG by size 1/4 to 4 GRADE CF8M GRADE CF8M GRADE CF3M 1/4" THRU 3/8" ASTM A276 SS316 1/2" THRU 4" ASTM A351 ASTM A216 GRADE WCB ASTM A216 GRADE WCB ASTM A216 GRADE WCB 1/4" THRU 3/8" ASTM A276 SS316 1/2" THRU 4" ASTM A351 4 SEAT 2 5/5 STFE 5/5 STFE 5 JOINT GASKET 2 PTFE PTFE 6 STEM SEAL 1 RTFE RTFE 7 STEM 1 ASTM A276 SS316 ASTM A276 SS316 8 GLAND PACKING 1^ PTFE PTFE 9 GLAND BUSHING 1 AISI 34 AISI 34 1 LOCK SADDLE 1 AISI 34 AISI STEM NUT 1 AISI 34 AISI HANDLE 1 AISI 34 AISI HANDLE SLEEVE 1 VINYL VINYL 14 STEM WASHER 1 AISI 34 AISI BODY BOLT/STUD * ASTM A193 GRADE B8 ASTM A193 GRADE B8 16 BODY NUT # ASTM A194 GRADE 8 ASTM A194 GRADE 8 17 BELLEVILLE WASHER 2 AISI 31 AISI STOP BOLT 1 AISI 34 AISI STOP BOLT NUT 1 AISI 34 AISI 34 2 GLAND WASHER 1 RTFE RTFE 21 HANDLE LOCK 1 AISI 34 AISI ANTI-STATIC DEVICE 2 AISI 316 AISI STEM O-RING 1 VITON VITON 6 DIMENSIONS (IN) ^ PACKING SET * 1/4 THRU 1-1/2 QTY = 4 PCS * 2 THRU 4 QTY = 6 PCS #* 1/4 THRU 1-1/2 QTY = 4 PCS #* 2 THRU 4 QTY = 12 PCS NOTE: SIZES 2-1/2 THRU 4 INCLUDE SEAT RETAINER RINGS. SIZE øa B C D E F H K L L1 M T Y AC AD DD1 DD2 øz2 øz1 (LBS) ISO /4" F4/F5 3/8" F4/F5 1/2" F4/F5 3/4" F5/F7 1" F5/F7 1-1/4" F5/F7 1-1/2" F5/F F5/F7 2-1/ N/A F7/F N/A F7/F1 4" N/A F7/F1

7 High Performance, Full Port Split Body Flanged Ball Valve Series V9 (ANSI Class 15) V Series V9 V9 Flanged Torque Values for 5/5 STFE Seats Torque (In-lbs) 1/2" 14 3/4" 16 1" /2" 42 2" /2" 875 3" 1,4 4" 2,15 6" 4,5 NOTE: 3% SAFETY FOR LUBRICATING 285 PSID DIMENSIONS (IN) V9 Series ANSI Class 15 Flanged V-Port Control Valve V Series 6 15# Flanged Mounting Dimensions MATERIALS LIST NO. PART NAME QTY STAINLESS STEEL CARBON STEEL 1 BODY 1 2 END CAP 1 21 O-RING 1 VITON VITON 22 HANDLE NUT 1 AISI 34 AISI ANTI-STATIC DEVICE 2 AISI 316 AISI 316 ^ PACKING SET * 1/2 THRU 2 QTY = 4 PCS * 2-1/2 THRU 6 QTY = 8 PCS # ASTM A193 GRADE B7 FOR 6 ## ASTM A194 GRADE 2H FOR 6 PRESSURE IN PSIG & F9 Series Pressure vs Temperature Chart for Valves 1/2 to 12 Pressure vs. Temperature Chart for Valves 1/2 to 6 Class 15 Valve Body (-28) (-18) (38) (93) (149) (24) (26) (316) TEMPERATURE IN F ( C) NOTE: Dotted line shows the rating for valve body. Solid line shows the rating for valve seat. Both ratings need to be considered when determining the limitation of the valve for specific application. Consult factory for other seat materials. SIZE A B C D E F I J L N Q W W1 Y Z AB AC AD DD NN (LBS) ISO /2" M F4 3/4" M F4 1" M F5 1-1/2" M F7 2" M F7 2-1/2" M F7 3" M F M F1 RTFE ASTM A216 GRADE WCB ASTM A216 GRADE WCB 4 SEAT 2 5/5 STFE 5/5 STFE 5 JOINT GASKET 2 PTFE PTFE 6 STEM 1 ASTM A276 SS316 ASTM A276 SS316 7 STEM SEAL 1 RTFE RTFE 8 GLAND PACKING 1^ PTFE PTFE 9 GLAND WASHER 1 RTFE RTFE 1 GLAND BUSHING 1 AISI 34 AISI BELLEVILLE WASHER 2 AISI 31 AISI LOCKING PLATE 1 AISI 34 AISI LOCK SADDLE 1 AISI 34 AISI STEM NUT 1 AISI 34 AISI HANDLE LOCK 1 AISI 34 AISI HANDLE 1 AISI 34 AISI HANDLE SLEEVE 1 VINYL VINYL 18 STOP BOLT 1 AISI 34 AISI BODY BOLT * 2 BODY NUT * ASTM A193 GRADE B8 ASTM A194 GRADE 8 # ASTM A193 GRADE B8 ## ASTM A194 GRADE 8 5/5 STFE PRESSURE IN BAR SIZE A B C D E F I J L N Q W W1 Z1 Z2 AB AC AD DD1 DD2 NJN (LBS) ISO F12/F14 7

8 V Series FVD9 High Performance, Full Port 3# Flanged, Split Body Ball Valve Series FVD9-F3 (ANSI Class 3) for Valves 1/2 to 6 FVD9 Series ANSI Class 3 Flanged V-Port Control Valve PRESSURE IN PSIG (-28) DIMENSIONS (IN) FD9-F3 Series Pressure vs. Temperature Chart for Valves 1/2 to 6 Class 3 Pressure vs Temperature Chart 1 (-18) (38) 2 (93) TEMPERATURE IN F ( C) NOTE: Dotted line shows the rating for valve body. Solid line shows the rating for valve seat. Both ratings need to be considered when determining the limitation of the valve for specific application. Consult factory for other seat materials. RTFE 3 (149) Valve Body 4 (24) 5/5 STFE 5 (26) (316) PRESSURE IN BAR MATERIALS LIST API 67-6th Edition C E R T I F I E D F I R E S A F E FVD9-F3 Torque Values for 5/5 STFE Seats Torque 285 PSID Torque 74 PSID 1/2" /4" " /2" " /2" 92 1,2 3" 1,6 1,9 4" 2,35 3,8 6" 4,7 7, NOTE: 3% SAFETY FOR LUBRICATING 285 PSID NO. PART NAME QTY STAINLESS STEEL CARBON STEEL 1 BODY 1 2 END CAP 1 ASTM A216 GRADE WCB ASTM A216 GRADE WCB 4 SEAT 2 5/5 STFE 5/5 STFE 5 JOINT GASKET 2 GRAFOIL GRAFOIL 6 STEM 1 ASTM A276 SS316 ASTM A276 SS316 7 STEM SEAL 1 RTFE RTFE 8 GLAND PACKING 1 GRAFOIL GRAFOIL 9 GLAND WASHER 1 RTFE RTFE 1 GLAND BUSHING 1 AISI 34 AISI 34 SIZE A B C D E F I J L N Q W W1 Z1 Z2 AB AC AD DD1 DD2 NN ISO 5211 LBS 1/2" F4/F5 5 3/4" F4/F5 8 1" F4/F / F7/F1 22 2" F7/F /2" F7/F1 42 3" F1/F F1/F F12/F BELLEVILLE WASHER 2 AISI 31 AISI LOCK SADDLE 1 AISI 34 AISI STEM NUT 1 AISI 34 AISI STEM WASHER 1 AISI 34 AISI HANDLE 1 AISI 34 AISI HANDLE SLEEVE 1 VINYL VINYL 17 BODY STUD * 18 BODY NUT * ASTM A193 GRADE B8M ASTM A194 GRADE 8M ASTM A193 GRADE B7M ASTM A194 GRADE 2HM 19 STOP BOLT 1 AISI 34 AISI 34 2 STOP BOLT NUT 1 AISI 34 AISI HANDLE LOCK 1 AISI 34 AISI O-RING 1 VITON VITON 23 HANDLE NUT 1 AISI 34 AISI ANTI-STATIC DEVICE * 1/2 THRU 2 QTY = 4 PCS * 2-1/2 THRU 4 QTY = 8 PCS * 6 QTY = 12 PCS 2 AISI 316 AISI 316 VM Copyright 213 A-T Controls, Inc. LIT International Blvd. Cincinnati, Ohio PHONE (513) FAX (513)

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve.

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve. INOX-VAL SERIES 70000 STAINLESS STEEL BALL VALVE pc stainless steel ASTM A35 - CF8M ball valve. psi TUV T.A.Luft approved. COMPLIES WITH NACE MR 075, NACE MR 003 AND ISO 55 AVAILABLE FIRE SAFE APPROVED

More information

D I S T R I B U T E D V A L V E S TBV. Series 2100 Cryogenic Ball Valve TBV

D I S T R I B U T E D V A L V E S TBV. Series 2100 Cryogenic Ball Valve TBV TBV Series 2100 Cryogenic Ball Valve SERIES 2100 CRYOGENIC BALL VALVE The TBV 2100 Series Cryogenic Valve is designed and engineered by a staff that is experienced in cryogenic applications. It utilizes

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

industrial ball valves

industrial ball valves Industrial Ball Valves Index 2-Piece Ball Valve 7510 1 3-Piece Ball Valve 7520 2 3-Piece Ball Valve with GYROLOK Tube End Fittings 7520 3 High Tolerance Thread Specification 4 Family Features Low Pressure

More information

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2" 4" Stainless or Carbon Steel.

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2 4 Stainless or Carbon Steel. Features Bolted body construction Investment cast body actuator mounting pad Direct mount Blow-out proof stem 4-seat design Adjustable, live loaded packing Secondary stem seal O-ring /" - " Extra deep

More information

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.

Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves. Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire

More information

SERIES C CRYOGENIC BALL VALVES

SERIES C CRYOGENIC BALL VALVES SERIES C CRYOGENIC BALL VALVES SHARPE HIGH PERFORMANCE CRYOGENIC BALL VALVES Sharpe Cryogenic Series Ball Valves offer as standard features advantages that other valve manufacturers offer only as costly

More information

D I S T R I B U T E D V A L V E S. TBV Series 21/18 Cryogenic Flanged Ball Valve TBV

D I S T R I B U T E D V A L V E S. TBV Series 21/18 Cryogenic Flanged Ball Valve TBV TM TBV Series 21/18 Cryogenic Flanged Ball Valve The TBV Series 21/18 Two-Piece, Standard or Full Port, Flanged, Cryogenic Ball Valve is specifically designed for cryogenic applications. The Series 21/18

More information

PRODUCT CATALOGUE. Cryogenic Valves

PRODUCT CATALOGUE. Cryogenic Valves PRODUCT CATALOGUE Cryogenic Valves A FEW FACTS ABOUT MACK S. Since its establishment in 1939, Mack Valves have grown to become a leading provider of unique flow control, pressure reducing and safety relief

More information

FLANGED END BALL VALVE

FLANGED END BALL VALVE Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material

More information

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide A Bray High Performance Company A Subsidiary of BRAY Inc. A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP:

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Series FB. Floating Ball Valve

Series FB. Floating Ball Valve Series FB Floating Ball Valve AOP 06/11 2 FL-AOP-BALL-SERIES-FB-01 TABLE OF CONTENTS SERIES FB Floating Ball Valve Introduction... 4 Standard Features... 4 Material List and Standards... 5 Assembly Codes

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

3-PIECE FULL PORT SERIES V84 3-PIECE STANDARD PORT 3-PIECE HIGH PRESSURE CONTROL VALVE

3-PIECE FULL PORT SERIES V84 3-PIECE STANDARD PORT 3-PIECE HIGH PRESSURE CONTROL VALVE SERIES 84 Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass NPT, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* 3-PIECE

More information

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE

SERIES 74 HIGH PERFORMANCE FLANGED STANDARD PORT BALL VALVE Valves, Automation & Controls SERIES 7 HIGH PERFORANCE FLANGED STANDARD PORT BALL VALVE Fully Compliant API 608 5th Edition 50 300 FOR REFINING, CHEICAL & PETROCHEICAL PROCESSING Added Features Enhanced

More information

Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry

Saidi Spain BALL VALVES. Product Catalogue. English version. for the process industry Saidi Spain BALL VALVES Product Catalogue English version for the process industry BALL VALVES Product Catalogue 2 Saidi Spain 3 4 Saidi Spain TABLE OF CONTENTS MATERIAL TYPE SERIES PAGE No. BALL VALVES

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

PNEUMATIC and ELECTRIC ACTUATED VALVE PACKAGES PRICE LIST

PNEUMATIC and ELECTRIC ACTUATED VALVE PACKAGES PRICE LIST PNEUMATIC and ELECTRIC ACTUATED VALVE PACKAGES PRICE LIST Effective Date September 1st, 2008 PL-Actuated2001026 Bonomi North America, Inc. 128 Rental Court Rock Hill, S.C. 2732 www.bonominorthamerica.com

More information

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4

More information

Series # Flanged Cast Steel Check Valve

Series # Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve Design eatures Bolted Cover Swing Type Integral Seat Applicable Standards Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Butt-weld

More information

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6 +SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -

More information

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves BS EN ISO 9001 0086 as FM 00707 Worcester Controls Cryogenic 3-Piece Ball Valves Cryogenic Valve Design Worcester's experience and expertise in the design of cryogenic ball valves has been recognised throughout

More information

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R. n x ØS BALL VALVES ØP ØR ØT

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R. n x ØS BALL VALVES ØP ØR ØT J H Ø T Ø R Ø 5 L2 DN-300 (12 ) to DN-400 (16 Class-1 & 300 DN-1 (6 ) to DN-300 ØI X B Y L Ø P M n x Øs B N h C 4x900=360 J Ø 5 Ø P I n x ØS ØP ØR ØT 1 J B C R3 BALL VALVES L M Ø T Ø R n x Øs I Ø5 Ø 5

More information

Valves, Automation & Controls C80 /C89 & C70 /C74 CRYOGENIC SERIES VALVES. HIGH PERFORMANCE BALL VALVE for extreme low temperature applications

Valves, Automation & Controls C80 /C89 & C70 /C74 CRYOGENIC SERIES VALVES. HIGH PERFORMANCE BALL VALVE for extreme low temperature applications Valves, Automation & Controls C80 /C89 & C0 /C CRYOGENIC SERIES VALVES HIGH PERFORMANCE BALL VALVE for extreme low temperature applications SERIES C80/C89 & C0/C Valves, Automation & Controls Integral

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24 Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical

More information

HIGH PERFORMANCE BALL VALVES

HIGH PERFORMANCE BALL VALVES 2373_Oliver Valves_Inners 12/5/4 1:21 PM Page 16 HIGH PERFORMANCE BALL VALVES f e a t u r e s Instrument ball valves to 15,000 PSI (trunion mount). Instrument manifolds to 3,000 PSI. Actuated ball valves.

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

KF Needle & Gauge Valves

KF Needle & Gauge Valves KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low

More information

NEWCO. Forged Steel Valves. Technical Data TC9308-4

NEWCO. Forged Steel Valves. Technical Data TC9308-4 NEWCO Forged Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures

More information

Ball Valve. Selection Guide. 3-Piece Flanged Multi-Port Threaded Instrument Commercial V-Control Cryogenic

Ball Valve. Selection Guide. 3-Piece Flanged Multi-Port Threaded Instrument Commercial V-Control Cryogenic Ball Valve Selection Guide 3-Piece Flanged Multi-Port Threaded Instrument Commercial V-Control Cryogenic 3 Piece Ball Valves Triad Series Full Port ¼ through 4 Standard Port ¾ through 2 ½ Stainless Steel

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading

Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The

More information

Trunnion Mounted Ball Valves

Trunnion Mounted Ball Valves Trunnion Mounted Ball Valves THAT SQUALITY The Best Guarantee of Safety Perar Ball Valves, One of the first... since 1962 Founded in 1962, Perar is one of the first Italian Manufacturers of High Quality

More information

NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES METAL SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

MET-PRO DEAN PUMP SERIES RA P A K D A T A. Global Pump Solutions. Fan Cooled Hot Oil Pumps. Section RA

MET-PRO DEAN PUMP SERIES RA P A K D A T A. Global Pump Solutions. Fan Cooled Hot Oil Pumps. Section RA A Met-Pro Fluid Handling Technologies Business Combining the Resources of Dean Pump, Fybroc & Sethco DEAN PUMP SERIES RA Fan Cooled Hot Oil Pumps D A T A P A K Section RA SERIES RA FAN COOLED HOT OIL PUMPS

More information

SERIES. Stainless Steel Ball Valve with Mounting Pad 1/4-1 A-14

SERIES. Stainless Steel Ball Valve with Mounting Pad 1/4-1 A-14 A-14 76-100 SERIES Stainless Steel Ball Valve with Mounting Pad 1/4-1 Female NPT Thread, 2000 CWP (psig). Cold Non-Shock. (See referenced P/T chart) 150 psig Saturated Steam. Vacuum Service to 29 inches

More information

Three Piece Forged Trunnion Mounted Ball Valve

Three Piece Forged Trunnion Mounted Ball Valve International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320 Houston, Texas 77041 713-983-7600 TM Three Piece Forged Trunnion Mounted Ball Valve 2 through 56 ASME Class 150-1500 Bolted or Welded

More information

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY

universal BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY BALL VALVES FLOATING MONOBLOC - WAFER SPLIT BODY - 2 PIECES TRUNNION 3 PIECES BODY SIDE & TOP ENTRY CONSTRUCTION B 16.34 API 6A - API 6D BS 5351 EN 17292 SIZE FROM 1/2 TO 60 REDUCED AND FULL BORE CLASS

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

HIGH PERFORMANCE BALL VALVES

HIGH PERFORMANCE BALL VALVES HIGH PERFORMANCE BALL VALVES H-6800 & H-6800 CNG SERIES H-6800 FEATURES Certified for ISO 15848-1:2006(E) On/off-service ball valve with 2-way pattern Diverter-service ball valve with 3-way pattern Stainless

More information

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA

ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA 1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With

More information

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700 SAPAG Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Features Thermal expansion, to API 520 Certified to ASME VIII for air and steam Gas, Steam and Liquid service Integral nozzle -

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information

DOUBLE BLOCK AND BLEED VALVES

DOUBLE BLOCK AND BLEED VALVES DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance

More information

Baumann 87000 Flexsleev Sanitary Control Valve

Baumann 87000 Flexsleev Sanitary Control Valve Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found

More information

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS INSTALLATION AND OPERATION MANUAL FOR WORM GEAR ACTUATORS Thank you for purchasing our SBWG Worm Gear Actuator. Before installing or operating actuator, please carefully read this manual. The contents

More information

Peter Meyer Ball valves Cryogenic

Peter Meyer Ball valves Cryogenic Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing

More information

FCD MMABR (Part V-510) AN ISO 9001 REGISTERED COMPANY. E-Series Flanged Ball Valves. ANSI 150 and 300 Regular and Full-Port

FCD MMABR (Part V-510) AN ISO 9001 REGISTERED COMPANY. E-Series Flanged Ball Valves. ANSI 150 and 300 Regular and Full-Port FCD MMABR1005-00 (Part V-510) AN ISO 9001 REGISTERED COMPANY E-Series Flanged Ball Valves ANSI 150 and 300 Regular and Full-Port Table of Contents Design Features.......................3 E-Series Flanged

More information

Integral Block & Bleed Valves. High Technology Valve & Fitting Series

Integral Block & Bleed Valves. High Technology Valve & Fitting Series Integral Block & Bleed Valves High Technology Valve & Fitting Series SUPERLOK instrumentation products has the ultimate solutions for a compact range of one-piece forged body integral block & bleed valves,

More information

1900/P Series. Consolidated * Valves. Safety Relief Valve

1900/P Series. Consolidated * Valves. Safety Relief Valve GE Oil & Gas Technical Specifications 11/2014 Consolidated * s 1900/P Series Safety Relief The 1900/P Safety Relief is designed to be highly adaptable to meet numberous application requirements. Table

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 Series 240 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 DIN ANSI versions Application Mixing or flow-diverting valves for use in process engineering industrial applications

More information

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc. CONTROLS A Division of BRAY INTERNATIONAL, Inc. Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 06/20/2014 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation

More information

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial

More information

Fisher 8580 Rotary Valve

Fisher 8580 Rotary Valve 8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic

More information

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

PRESSURE REGULATORS GAS LOW PRESSURE PRESSURE REDUCING

PRESSURE REGULATORS GAS LOW PRESSURE PRESSURE REDUCING GAS LOW PRESSURE PRESSURE REDUCING APPLICATIONS: Low pressure regulator for maintaining vapor pressure on storage tanks, controlling compressor by-pass for gas recirculation and maintaining low pressure

More information

TY-FLO Needle Valves

TY-FLO Needle Valves Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted

More information

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS

BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes

More information

Manufacturers of 1/2 to 12 up to class 2500 FORGED STEEL BALL VALVES for all applications and working conditions. High product performance and

Manufacturers of 1/2 to 12 up to class 2500 FORGED STEEL BALL VALVES for all applications and working conditions. High product performance and Manufacturers of 1/2 to 12 up to class 2500 FORGED STEEL BALL VALVES for all applications and working conditions. High product performance and Customer satisfaction service after more than 30 years of

More information

T&S Ball Valves. High Technology Valve & Fitting Series.

T&S Ball Valves. High Technology Valve & Fitting Series. T&S Ball Valves High Technology Valve & Fitting Series www.superlok.com 120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation

More information

400 SERIES. Needle Valves Standard, Hard Seat

400 SERIES. Needle Valves Standard, Hard Seat Needle Valves Standard, Hard Seat 400 SERIES 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability 10,000 psi pressure rating @ 200 F Blow-out proof stem provides a secondary

More information

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance

More information

Ball Valves Product Overview

Ball Valves Product Overview Ball Valves Product Overview MECAFRANCE has been recognized as a world class manufacturer of high quality and an innovative range of ball valves, which are used in the major process industries of the world

More information

CRYOGENIC AND LOW TEMPERATURE SERVICE TRIAD SERIES BALL VALVES INSTALLATION - MAINTENANCE MANUAL

CRYOGENIC AND LOW TEMPERATURE SERVICE TRIAD SERIES BALL VALVES INSTALLATION - MAINTENANCE MANUAL Date: August 2011 / Page 1 of 6 CRYOGENIC AND LOW TEMPERATURE SERVICE TRIAD SERIES BALL VALVES (FP2000/FP3000 and SP2000/SP3000 WITH CRYO OR LOW TEMP EXTENSION) INSTALLATION - MAINTENANCE MANUAL DESIGN

More information

Ultra-Seal Ball Valves Series 110 & 200

Ultra-Seal Ball Valves Series 110 & 200 A range of one piece reduced bore, flanged, free floating (seat supported) ball valves, incorporating mounting flanges to BS EN ISO 5211, featuring soft, metal and carbon seated designs. Features One piece

More information

valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox.

valve solutions Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper www.quilinox. valve solutions www.quilinox.com Chemical Cosmetic Cryogenic Food & Beverage Marine Mining Nuclear Oil & Gas Paint Pharmaceutical Pulp & Paper valvulas esfera PBM.pdf (1753) 2015/01 1/10 D E SIGN F E A

More information

Technical Manual. Register 18 Contents - T4E

Technical Manual. Register 18 Contents - T4E Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5

More information

Characterized Port -CP Ball Valves

Characterized Port -CP Ball Valves Characterized Port Two Way and Three Way Description: The Characterized Port Two-way are coupled with our actuators to provide equal percentage flow control. The Characterized Port Three-way are coupled

More information

MUELLER CORPORATION VALVES

MUELLER CORPORATION VALVES MUELLER CORPORATION VALVES 5. Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping machine used to make pressure taps

More information

SECTION H SPECIALTY BALL VALVES

SECTION H SPECIALTY BALL VALVES SECTION H SPECIALTY BALL VALVES Table of Contents SERIES DESCRIPTION PAGE BRONZE 7K-100 Series...Threaded Full Port Bronze with Drain... H-5 71-500 Series...Threaded Bronze Spring Return Handle... H-6

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

PCC TechTorq. Rack and Pinion Actuators. A PCC Flow Technologies Company. Double Acting & Spring Return

PCC TechTorq. Rack and Pinion Actuators. A PCC Flow Technologies Company. Double Acting & Spring Return PCC TechTorq A PCC Flow Technologies Company Rack and Pinion Actuators Double Acting & Spring Return FEATURES precision engineered pistons with 4 wear pads blowout proof, onepiece drive shaft standard

More information

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY

BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY CATALOGUE 2012 - PART 4 CHEMICAL BUTTERLY VALVES WAFER & LUG SS316 DISC- PTFE SEAT 2 PIECES BODY BUTTERFLY VALVES WAFER & LUG PFA COVERED DISC PTFE 2 PIECES BODY PLUG VALVES SLEEVED PLUG VALVES FULLY LINED

More information

SSI Equipment Inc. Strainers Valves Connectors

SSI Equipment Inc. Strainers Valves Connectors Cast Cast Threaded, Socket Weld And Sweat Y- Size Range: 1/4 to 3 (8 mm to 80 mm) Cast Iron (A126-B), Bronze (B62), Carbon Steel (WCB, LCB, LCC), Chrome-Molly (WC6, WC9), Stainless Steel (CF8M) and Alloy

More information

Metal Seated Ball Valves

Metal Seated Ball Valves Tech Bulletin Page 130-11 Metal ed Ball Valves Engineered Valves for Severe Service Reliability with Innovative Process Solutions Severe Series Extreme Series Shut-Off Class IV, V & VI Automated Metal

More information

Series # Flanged Cast Steel Globe Valve Features

Series # Flanged Cast Steel Globe Valve Features Series 45114 150# Flanged ast Steel Globe Valve Features SARP - SRIS 45114 150# Flanged ast Steel Globe Valve Outside screw and yoke Bolted bonnet Stem / Wedge onnection meets API 600 Pull Test Welded

More information

BULLETIN A FEBRUARY DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES

BULLETIN A FEBRUARY DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN 35.00-1A FEBRUARY 2013 DeZURIK KGC-HD HEAVY DUTY CAST STAINLESS STEEL KNIFE GATE VALVES DeZURIK KGC-HD (Heavy Duty) Cast Stainless Steel Knife Gate Valves Applications DeZURIK KGC-HD Cast Stainless

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety

More information

Pneumatic Rack & Pinion Actuator

Pneumatic Rack & Pinion Actuator Pneumatic Rack & Pinion Actuator 4120 NE Columbia Blvd. - Portland, Oregon USA 97211 Phone: 503-287-8383 - Fax: 503-281-9677 - www.fnwvalve.com STANDARD FEATURES Torque output range from 40 to 32,315 inch-pounds

More information

MADE IN THE USA BALL VA LV ES

MADE IN THE USA BALL VA LV ES MADE IN THE USA BALL VA LV ES Ball Va l v e s INDEX [PRODUCTS] PRODUCT FAMILY PAGE Standard Bronze Ball Valves...3-4 Bronze Specialty Valves...4-5 Carbon Steel Threaded, Socket Weld & Butt Weld Valves...5-7

More information

ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES

ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design

More information

Stainless Steel Valves For the Sanitary Industries

Stainless Steel Valves For the Sanitary Industries www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification... OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3

More information

GATE VALVES. Overview... 10

GATE VALVES. Overview... 10 Overview... 0 olted onnet ate- 800 lb. & 0 lb. valves... olted onnet ate- 0 lb. & 0 lb. valves... Welded onnet ate- 800 lb. & 0 lb. valves... 3 Welded onnet ate- 0 lb. & 40 lb. valves... 4 TE VLVES 9 OVERVIEW

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

Fisher CV500 Rotary Globe Control Valve

Fisher CV500 Rotary Globe Control Valve CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards Series 2 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 According to DIN US stards Application Mixing or flow-diverting valves designed for use in process engineering industrial

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5

PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5 PERFORMANCE SPECIFICATIONS PIC-V Valve... 1 Unimizer (1/2 to 3 )... 2 Unimizer (4 to 6 )... 3 Automizer... 4 MVP Valve... 5 PIC-V Valve 1. PRESSURE INDEPENDENT ACTUATED BALL VALVES AND CARTRIDGE (PIC-V)

More information

SERIES CBS, CU, CCS, CSS & CH THREADED BALL VALVES

SERIES CBS, CU, CCS, CSS & CH THREADED BALL VALVES SERIES CBS, CU, CCS, CSS & CH THREE BLL VLVES PROVEN PERFORMNCE WORL CLSS PROUCTS ViNtrol offers a complete solution for your flow control applications. ViNtrol products serve many of the leading Petroleum

More information

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT

IF IT FLOWS THE BOWIE PUMP CAN PUMP IT IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series

More information

Know-how makes the difference. Ball Valves

Know-how makes the difference. Ball Valves Know-how makes the difference Ball Valves With Dansk Ventil Center as your business partner, you are always guaranteed a wide and well sorted product range and a unique technical know-how V Product development

More information

BUTTERFLY VALVE Gear Type (28"-48")

BUTTERFLY VALVE Gear Type (28-48) BUTTERFLY VALVE Gear Type (28"-48") Lower initial cost compared to other valve types. Easier installation due to narrow face to face affords lowest installed cost. Designed to fit between ANSI D 16.5 Class

More information