COMPRESSION SPRINGS: STANDARD SERIES (INCH)

Size: px
Start display at page:

Download "COMPRESSION SPRINGS: STANDARD SERIES (INCH)"

Transcription

1 : STANDARD SERIES (INCH) LC 014A F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 014A 9A F F M LC 014A 9B F F M LC 014A 9C F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 014A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 016A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M LC 018A F F M FREE LENGTH O.D. 51

2 : STANDARD SERIES (INCH) LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 020A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 022A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M LC 024A F F M 52

3 : STANDARD SERIES (INCH) LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 014AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 016AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M LC 018AA F F M FREE LENGTH O.D. 53

4 : STANDARD SERIES (INCH) LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 020AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 022AA F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M LC 016AB F F M 54

5 : STANDARD SERIES (INCH) LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 018AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 021AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M LC 023AB F F M FREE LENGTH O.D. 55

6 : STANDARD SERIES (INCH) LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 016AC F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 023AD F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M LC 014B F F M 56

7 : STANDARD SERIES (INCH) LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 016B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 018B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M LC 020B F F M FREE LENGTH O.D. 57

8 : STANDARD SERIES (INCH) LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 022B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 024B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M LC 026B F F M 58

9 : STANDARD SERIES (INCH) LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 029B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B F F M LC 032B G G N LC 032B G G N LC 032B G G N LC 032B G G N LC 032B G G N LC 032B G G N FREE LENGTH O.D. 59

10 : STANDARD SERIES (INCH) LC 035B F F M LC 035B F F M LC 035B F F M LC 035B F F M LC 035B F F M LC 035B F F M LC 035B F F M LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 035B G G N LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 014BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M LC 018BB F F M 60

11 : STANDARD SERIES (INCH) LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 020BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 023BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M LC 026BB F F M FREE LENGTH O.D. 61

12 : STANDARD SERIES (INCH) LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 029BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB F F M LC 032BB G G N LC 032BB G G N LC 032BB G G N LC 032BB G G N LC 032BB G G N LC 032BB G G N 62

13 : STANDARD SERIES (INCH) LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 018BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 022BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N LC 026BC G G N FREE LENGTH O.D. 63

14 : STANDARD SERIES (INCH) LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 016BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 018BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N LC 020BD G G N 64

15 : STANDARD SERIES (INCH) LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 028BD G G N LC 016C F F M LC 016C F F M LC 016C F F M LC 016C F F M LC 016C F F M LC 016C F F M LC 016C F F M LC 016C F F M LC 016C F F M LC 016C G G N LC 016C G G N LC 016C G G N LC 016C G G N LC 016C G G N LC 016C G G N LC 016C G G N LC 016C G G N FREE LENGTH O.D. 65

16 : STANDARD SERIES (INCH) LC 018C F F M LC 018C F F M LC 018C F F M LC 018C F F M LC 018C F F M LC 018C F F M LC 018C F F M LC 018C F F M LC 018C F F M LC 018C G G N LC 018C G G N LC 018C G G N LC 018C G G N LC 018C G G N LC 018C G G N LC 018C G G N LC 018C G G N LC 020C F F M LC 020C F F M LC 020C F F M LC 020C F F M LC 020C F F M LC 020C F F M LC 020C F F M LC 020C F F M LC 020C F F M LC 020C G G N LC 020C G G N LC 020C G G N LC 020C G G N LC 020C G G N LC 020C G G N LC 020C G G N LC 022C F F M LC 022C F F M LC 022C F F M LC 022C F F M LC 022C F F M LC 022C F F M LC 022C F F M LC 022C F F M LC 022C F F M LC 022C G G N LC 022C G G N LC 022C G G N LC 022C G G N LC 022C G G N LC 022C G G N 66

17 : STANDARD SERIES (INCH) LC 024C F F M LC 024C F F M LC 024C F F M LC 024C F F M LC 024C F F M LC 024C F F M LC 024C F F M LC 024C G G N LC 024C G G N LC 024C G G N LC 024C G G N LC 024C G G N LC 024C G G N LC 024C G G N LC 026C F F M LC 026C F F M LC 026C F F M LC 026C F F M LC 026C F F M LC 026C F F M LC 026C F F M LC 026C F F M LC 026C G G N LC 026C G G N LC 026C G G N LC 026C G G N LC 026C G G N LC 026C G G N LC 026C G G N LC 029C F F M LC 029C F F M LC 029C F F M LC 029C F F M LC 029C F F M LC 029C F F M LC 029C F F M LC 029C G G N LC 029C G G N LC 029C G G N LC 029C G G N LC 029C G G N LC 029C G G N LC 029C G G N FREE LENGTH O.D. 67

18 : STANDARD SERIES (INCH) LC 032C F F M LC 032C F F M LC 032C F F M LC 032C F F M LC 032C F F M LC 032C F F M LC 032C F F M LC 032C F F M LC 032C G G N LC 032C G G N LC 032C G G N LC 032C G G N LC 032C G G N LC 032C G G N LC 032C G G N LC 032C G G N LC 032C G G N LC 035C F F M LC 035C F F M LC 035C F F M LC 035C F F M LC 035C F F M LC 035C F F M LC 035C F F M LC 035C F F M LC 035C G G N LC 035C G G N LC 035C G G N LC 035C G G N LC 035C G G N LC 035 C G G N LC 035C G G N LC 035C G G N LC 035C G G N LC 035C G G N LC 035C G G N 68

19 : STANDARD SERIES (INCH) LC 038C F F M LC 038C F F M LC 038C F F M LC 038C F F M LC 038C F F M LC 038C F F M LC 038C F F M LC 038C F F M LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 038C G G N LC 040C F F M LC 040C F F M LC 040C F F M LC 040C F F M LC 040C F F M LC 040C F F M LC 040C F F M LC 040C F F M LC 040C G G N LC 040C G G N LC 040C G G N LC 040C G G N LC 040C G G N LC 040C G G N LC 040C G G N LC 040C G G N LC 040C J J P LC 040C J J P LC 040C J J P LC 040C J J P FREE LENGTH O.D. 69

20 : STANDARD SERIES (INCH) LC 042C F F M LC 042C F F M LC 042C F F M LC 042C F F M LC 042C F F M LC 042C F F M LC 042C F F M LC 042C G G N LC 042C G G N LC 042C G G N LC 042C G G N LC 042C G G N LC 042C G G N LC 042C G G N LC 042C G G N LC 042C J J P LC 042C J J P LC 042C J J P LC 042C J J P LC 045C F F M LC 045C F F M LC 045C F F M LC 045C F F M LC 045C F F M LC 045C F F M LC 045C F F M LC 045C G G N LC 045C G G N LC 045C G G N LC 045C G G N LC 045C G G N LC 045C G G N LC 045C G G N LC 045C J J P LC 045C J J P LC 045C J J P LC 045C J J P 70

21 : STANDARD SERIES (INCH) LC 020CD F F M LC 020CD F F M LC 020CD F F M LC 020CD F F M LC 020CD F F M LC 020CD F F M LC 020CD F F M LC 020CD F F M LC 020CD F F M LC 020CD G G N LC 020CD G G N LC 020CD G G N LC 020CD G G N LC 020CD G G N LC 020CD G G N LC 020CD G G N LC 020CD G G N LC 026CD F F M LC 026CD F F M LC 026CD F F M LC 026CD F F M LC 026CD F F M LC 026CD F F M LC 026CD F F M LC 026CD G G N LC 026CD G G N LC 026CD G G N LC 026CD G G N LC 026CD G G N LC 026CD G G N LC 026CD G G N LC 026CD G G N FREE LENGTH O.D. 71

22 : STANDARD SERIES (INCH) LC 035CD F F M LC 035CD F F M LC 035CD F F M LC 035CD F F M LC 035CD F F M LC 035CD F F M LC 035CD F F M LC 035CD F F M LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 035CD G G N LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 028CE F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D F F M LC 022D G G N LC 022D G G N LC 022D G G N LC 022D G G N 72

Online EFFECTIVE AS OF JANUARY 2013

Online EFFECTIVE AS OF JANUARY 2013 2013 A and C Session Start Dates (A-B Quarter Sequence*) 2013 B and D Session Start Dates (B-A Quarter Sequence*) Quarter 5 2012 1205A&C Begins November 5, 2012 1205A Ends December 9, 2012 Session Break

More information

CONVERSION CHART PROBATE CODE TO ESTATES CODE

CONVERSION CHART PROBATE CODE TO ESTATES CODE Revised January 27, 2014 Prepared by Prof. Gerry W. Beyer CONVERSION CHART PROBATE CODE TO ESTATES CODE 2(a) (part) 21.006 2(c) 21.004 3 (part) 22.001 3(a) 22.002 3(b) 22.004 3(c) 22.005 3(d) 22.006 3(e)

More information

ให p, q, r และ s เป นพห นามใดๆ จะได ว า

ให p, q, r และ s เป นพห นามใดๆ จะได ว า เศษส วนของพห นาม ให A และ B เป นพห นาม พห นามใดๆ โดยท B 0 เร ยก B A ว า เศษส วนของพห นาม การดาเน นการของเศษส วนของพห นาม ให p, q, r และ s เป นพห นามใดๆ จะได ว า Q P R Q P Q R Q P R Q P Q R R Q P S P Q

More information

!' /%!' / / 8 ' 2 % / L ' % M " 7'' / 75,G ; M

!' /%!' / / 8 ' 2 % / L ' % M  7'' / 75,G ; M !' /% ' '/'' /%'' G " '' ''' M L 7%/% %% %% /!%,%%=>!' / / 5'=> 8 ' 2 % / ' 5'=> 7'/Q( /,%%=> L ' % M " 7'' / % /6 7%,5 6 7%,5=67> 7'E"/ % / L 2 % /,G 75,G ; M " ' /%,G. %/; , B 1 0.

More information

Page 1 of 37 # $ $ " $# " #! " % $ &'(")"# *+,)#)./(0 1)2+)1*+, 3")#)./("*+4,%" )#)./(,,)#2+)( 3 %&'/ ",, &*)1*/252+))&1)1*'25 2+))6 " #% 6" " 6 " ",, ", #, 1+, 6 6,, " 3, )/, &'(" )/,6# 2+2(%,*(, 1, ")#).*+

More information

Visa Smart Debit/Credit Certificate Authority Public Keys

Visa Smart Debit/Credit Certificate Authority Public Keys CHIP AND NEW TECHNOLOGIES Visa Smart Debit/Credit Certificate Authority Public Keys Overview The EMV standard calls for the use of Public Key technology for offline authentication, for aspects of online

More information

Grading: A1=90% and above; A=80% to 89%; B1=70% to 79%; B=60% to 69%; C=50% to 59%; D=34% to 49%; E=Repeated; 1 of 55 pages

Grading: A1=90% and above; A=80% to 89%; B1=70% to 79%; B=60% to 69%; C=50% to 59%; D=34% to 49%; E=Repeated; 1 of 55 pages 100001 A1 100002 A1 100003 B 100004 B 100005 B 100006 A 100007 C 100008 C 100009 B1 100010 D 100011 A 100012 B 100013 B 100014 B1 100015 C 100016 B1 100017 A1 100018 A1 100019 A1 100020 B1 100021 A 100022

More information

A New Decade of Advancing Oral Health in Kansas Work Plan June 10, 2013

A New Decade of Advancing Oral Health in Kansas Work Plan June 10, 2013 A New Decade of Advancing Oral Health in Kansas Work Plan June 10, 2013 GOAL 1: PROJECT STEERING COMMITTEE Set up a project steering committee to oversee the project objectives related to improving the

More information

SERVER CERTIFICATES OF THE VETUMA SERVICE

SERVER CERTIFICATES OF THE VETUMA SERVICE Page 1 Version: 3.4, 19.12.2014 SERVER CERTIFICATES OF THE VETUMA SERVICE 1 (18) Page 2 Version: 3.4, 19.12.2014 Table of Contents 1. Introduction... 3 2. Test Environment... 3 2.1 Vetuma test environment...

More information

The common ratio in (ii) is called the scaled-factor. An example of two similar triangles is shown in Figure 47.1. Figure 47.1

The common ratio in (ii) is called the scaled-factor. An example of two similar triangles is shown in Figure 47.1. Figure 47.1 47 Similar Triangles An overhead projector forms an image on the screen which has the same shape as the image on the transparency but with the size altered. Two figures that have the same shape but not

More information

MATH 304 Linear Algebra Lecture 24: Scalar product.

MATH 304 Linear Algebra Lecture 24: Scalar product. MATH 304 Linear Algebra Lecture 24: Scalar product. Vectors: geometric approach B A B A A vector is represented by a directed segment. Directed segment is drawn as an arrow. Different arrows represent

More information

Digital Logic Design

Digital Logic Design Digital Logic Design ENGG1015 1 st Semester, 2010 Dr. Kenneth Wong Dr. Hayden So Department of Electrical and Electronic Engineering Determining output level from a diagram Implementing Circuits From Boolean

More information

Functional Dependencies: Part 2

Functional Dependencies: Part 2 Yufei Tao Department of Computer Science and Engineering Chinese University of Hong Kong In designing a database, for the purpose of minimizing redundancy, we need to collect a set F of functional dependencies

More information

Attachment "A" - List of HP Inkjet Printers

Attachment A - List of HP Inkjet Printers HP Deskjet 350c Printer HP Deskjet 350cbi Printer HP Deskjet 350cbi Printer w/roller-case HP Deskjet 420 Printer HP Deskjet 420c Printer HP Deskjet 610c Printer HP Deskjet 610cl Printer HP Deskjet 612c

More information

EXTENSION SPRINGS: STANDARD SERIES (INCH)

EXTENSION SPRINGS: STANDARD SERIES (INCH) LE 014A 01 0.500 12.70 2.000 0.0360 0.990 25.15 L L LE 014A 02 0.563 14.30 1.650 0.0290 1.153 29.29 L L LE 014A 03 0.625 15.88 1.400 0.0250 1.325 33.66 L L LE 014A 04 0.750 19.05 1.080 0.0190 1.660 42.16

More information

SERVER CERTIFICATES OF THE VETUMA SERVICE

SERVER CERTIFICATES OF THE VETUMA SERVICE Page 1 Version: 3.5, 4.11.2015 SERVER CERTIFICATES OF THE VETUMA SERVICE 1 (18) Page 2 Version: 3.5, 4.11.2015 Table of Contents 1. Introduction... 3 2. Test Environment... 3 2.1 Vetuma test environment...

More information

H. R. 3692 IN THE HOUSE OF REPRESENTATIVES A BILL

H. R. 3692 IN THE HOUSE OF REPRESENTATIVES A BILL I TH CONGRESS 1ST SESSION H. R. To amend the Safe and Drug-Free Schools and Communities Act and the Omnibus Crime Control and Safe Streets Act of 1 to authorize the use of grant funds for bullying prevention,

More information

A. Capital Planning and Prioritisation Overview. SAMF Area: Framework Mapping (Star indicates process location) Process Map. Process Description

A. Capital Planning and Prioritisation Overview. SAMF Area: Framework Mapping (Star indicates process location) Process Map. Process Description Sub- A. Capital ning and Prioritisation Overview N/A Process Code: Sub-Process Code: A N/A (Star indicates location) Capital ning and Prioritisation works Seek to projects Manage for capital AA Long-term

More information

PRIMARY CONTENT MODULE Algebra I -Linear Equations & Inequalities T-71. Applications. F = mc + b.

PRIMARY CONTENT MODULE Algebra I -Linear Equations & Inequalities T-71. Applications. F = mc + b. PRIMARY CONTENT MODULE Algebra I -Linear Equations & Inequalities T-71 Applications The formula y = mx + b sometimes appears with different symbols. For example, instead of x, we could use the letter C.

More information

Calculation of Valu-Trac Statuses

Calculation of Valu-Trac Statuses Calculation of Intrinsic Value Yield Latest Cash Earnings (Net Income + Depreciation and Amortization) (put aside) Dividend (subtract) Provision for Depreciation (Net Assets x Inflation Rate) (subtract)

More information

!" #" $ % $ & ' % "( ) $* ( + $, - $. /

! # $ % $ & ' % ( ) $* ( + $, - $. / !" #"$ %$ & '% "( )$* (+$, - $. / 0 & 1&&##+.2 " 2&%%.&, &#& $ & 1 $ + $1 & 31,4!%'"%# 1$4 % 2.& # &2 5 + 670894, ' &" '$+.&2 2$%&##" +..$&&+%1$%114+1 &$ +1&#&+,#%11" &&.1&.$$!$%&'" &:#1;#.!, $& &' +".2

More information

"HIGHER EDUCATION VALUES AND OPINIONS SURVEY" ADVANCED PLACEMENT TEACHERS and GUIDANCE COUNSELORS May-June 1994

HIGHER EDUCATION VALUES AND OPINIONS SURVEY ADVANCED PLACEMENT TEACHERS and GUIDANCE COUNSELORS May-June 1994 "HIGHER EDUCATION VALUES AND OPINIONS SURVEY" ADVANCED PLACEMENT TEACHERS and GUIDANCE COUNSELORS May-June 1994 VARIABLE SURVEY ANSWER NAME QUESTION CATEGORIES Facsimile the original mail questionnaire

More information

Employee; employee and spouse; employee and dependent children; and employee, spouse and dependent plans are available.

Employee; employee and spouse; employee and dependent children; and employee, spouse and dependent plans are available. Medical BridgeBSMB 3000 Colonial s Medical BridgeBSMB 3000 insurance provides benefits to your employees to help pay for deductible and coinsurance costs, as well as everyday living expenses. And we pay

More information

INDEPENDENT LIVING Floor Plans

INDEPENDENT LIVING Floor Plans INDEPENDENT LIVING IA ONE 720 Square Feet 10' X 11'6" W/D 12' X 15'6" 11' X 13' INDEPENDENT LIVING IB ONE 813 Square Feet 9'6" X 13' W/D 14' X 17' 11' X 12' INDEPENDENT LIVING IC TWO 982 Square Feet 10'

More information

Use of the Chi-Square Statistic. Marie Diener-West, PhD Johns Hopkins University

Use of the Chi-Square Statistic. Marie Diener-West, PhD Johns Hopkins University This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike License. Your use of this material constitutes acceptance of that license and the conditions of use of materials on this

More information

Montgomery GI Bill Selected Reserve (MGIB-SR) Command/Servicing Personnel Office Review

Montgomery GI Bill Selected Reserve (MGIB-SR) Command/Servicing Personnel Office Review Overview Montgomery GI Bill Selected Reserve (MGIB-SR) Command/Servicing Personnel Office Review Introduction This transaction is used to record a Reserve member s Montgomery GI Bill-SR (MGIB-SR) eligibility

More information

Pattern Co. Monkey Trouble Wall Quilt. Size: 48" x 58"

Pattern Co. Monkey Trouble Wall Quilt. Size: 48 x 58 .............................................................................................................................................. Pattern Co..........................................................................................

More information

US Code (Unofficial compilation from the Legal Information Institute)

US Code (Unofficial compilation from the Legal Information Institute) US Code (Unofficial compilation from the Legal Information Institute) TITLE 26 - INTERNAL REVENUE CODE Subtitle D - Miscellaneous Excise Taxes CHAPTER 43 QUALIFIED PENSION, ETC., PLANS Please Note: This

More information

DEFINITIONS. Perpendicular Two lines are called perpendicular if they form a right angle.

DEFINITIONS. Perpendicular Two lines are called perpendicular if they form a right angle. DEFINITIONS Degree A degree is the 1 th part of a straight angle. 180 Right Angle A 90 angle is called a right angle. Perpendicular Two lines are called perpendicular if they form a right angle. Congruent

More information

Service Instruction. 1.0 SUBJECT: ECi Accessory Cases for Lycoming 4-Cylinder engines with single magneto configurations and TITAN 361 Engines

Service Instruction. 1.0 SUBJECT: ECi Accessory Cases for Lycoming 4-Cylinder engines with single magneto configurations and TITAN 361 Engines Title: Service Instruction ECi Accessory Cases Installed on Engines S.I. No.: 03-1 Page: 1 of 7 Issued: 2/28/2003 Revision: 2 (4/13/2009) Technical Portions are FAA DER Approved. 1.0 SUBJECT: ECi Accessory

More information

CROSS REFERENCE. Cross Reference Index 110-122. Cast ID Number 110-111 Connector ID Number 111 Engine ID Number 112-122. 2015 Ford Motor Company 109

CROSS REFERENCE. Cross Reference Index 110-122. Cast ID Number 110-111 Connector ID Number 111 Engine ID Number 112-122. 2015 Ford Motor Company 109 CROSS REFERENCE Cross Reference Index 110-122 Cast ID Number 110-111 Connector ID Number 111 112-122 2015 Ford Motor Company 109 CROSS REFERENCE Cast ID Number Cast ID Ford Service # MC Part # Part Type

More information

Chapter (3) SLOPE DEFLECTION METHOD

Chapter (3) SLOPE DEFLECTION METHOD Chapter (3) SOPE DEFECTION ETHOD 3.1 Introduction:- The methods of three moment equation, and consistent deformation method are represent the FORCE ETHOD of structural analysis, The slope deflection method

More information

Circles Learning Strategies. What should students be able to do within this interactive?

Circles Learning Strategies. What should students be able to do within this interactive? Circles Learning Strategies What should students be able to do within this interactive? Select one of the four circle properties. Follow the directions provided for each property. Perform the investigations

More information

(i) Every natural number is a whole number. True, since the collection of whole numbers contains all natural numbers.

(i) Every natural number is a whole number. True, since the collection of whole numbers contains all natural numbers. Exercise 1.1 1. Is zero a rational number? Can you write it in the form p/q, where p and q are integers and q 0? Yes. Zero is a rational number as it can be represented as 0/1 or 0/2. 2. Find six rational

More information

COMMERCIAL AIRLINE FACT SHEET

COMMERCIAL AIRLINE FACT SHEET COMMERCIAL AIRLINE FACT SHEET PASSENGER 100% Process LIFEJACKETS Black ame: SURVITECpos_PMS.eps Colourway: 100% Pantone PMS 158c RFD 102 Mk 2BA (00002136) Demo model (40982001) RFD 102 Mk 3 (00002256)

More information

Finding the Measure of Segments Examples

Finding the Measure of Segments Examples Finding the Measure of Segments Examples 1. In geometry, the distance between two points is used to define the measure of a segment. Segments can be defined by using the idea of betweenness. In the figure

More information

Math 2331 Linear Algebra

Math 2331 Linear Algebra 2.2 The Inverse of a Matrix Math 2331 Linear Algebra 2.2 The Inverse of a Matrix Jiwen He Department of Mathematics, University of Houston jiwenhe@math.uh.edu math.uh.edu/ jiwenhe/math2331 Jiwen He, University

More information

Ź Ź ł ź Ź ś ź ł ź Ś ę ż ż ł ż ż Ż Ś ę Ż Ż ę ś ź ł Ź ł ł ż ż ź ż ż Ś ę ż ż Ź Ł Ż Ż Ą ż ż ę ź Ń Ź ś ł ź ż ł ś ź ź Ą ć ś ś Ź Ś ę ę ć ż Ź Ą Ń Ą ł ć ć ł ł ź ę Ś ę ś ę ł ś ć ź ś ł ś ł ł ł ł ć ć Ś ł ź Ś ł

More information

1. Find the length of BC in the following triangles. It will help to first find the length of the segment marked X.

1. Find the length of BC in the following triangles. It will help to first find the length of the segment marked X. 1 Find the length of BC in the following triangles It will help to first find the length of the segment marked X a: b: Given: the diagonals of parallelogram ABCD meet at point O The altitude OE divides

More information

Chapter 17. Mensuration of Pyramid

Chapter 17. Mensuration of Pyramid 44 Chapter 7 7. Pyramid: A pyramid is a solid whose base is a plane polygon and sides are triangles that meet in a common vertex. The triangular sides are called lateral faces. The common vertex is also

More information

Quick Installation Guide

Quick Installation Guide Quick Installation Guide This manual has been designed to guide you through basic settings of your IP devices, such as installation and configuration for using them. Step1. Assemble and install IP device

More information

Algebraic Properties and Proofs

Algebraic Properties and Proofs Algebraic Properties and Proofs Name You have solved algebraic equations for a couple years now, but now it is time to justify the steps you have practiced and now take without thinking and acting without

More information

A DIVISION OF THE MENO. Meno proposes a question: whether virtue can be taught. Three conversations or discussions following question

A DIVISION OF THE MENO. Meno proposes a question: whether virtue can be taught. Three conversations or discussions following question A DIVISION OF THE MENO 70A 70B-100B Meno proposes a question: whether virtue can be taught Three conversations or discussions following question 70B-80D Conversation on a question before Meno's: what is

More information

Training Manual. Shuffle Master Gaming Three Card Poker Training Manual R20020325

Training Manual. Shuffle Master Gaming Three Card Poker Training Manual R20020325 Training Manual 2001 Shuffle Master, Inc. First Printing All Rights Reserved Printed in the United States of America No part of this publication may be reproduced or distributed in any form or by any means,

More information

Quick Installation Guide TBK-SER1001

Quick Installation Guide TBK-SER1001 Quick Installation Guide TBK-SER1001 This manual has been designed to guide you to basic settings of your IP devices such as installation and configuration for using them. 1. Connect cables to IP device

More information

Magic Squares and Modular Arithmetic

Magic Squares and Modular Arithmetic Magic Squares and Modular Arithmetic Jim Carlson November 7, 2001 1 Introduction Recall that a magic square is a square array of consecutive distinct numbers such that all row and column sums and are the

More information

Robust Parameter Design Using Statgraphics Centurion. Dr. Neil W. Polhemus Copy right 2011 by StatPoint Technologies, Inc.

Robust Parameter Design Using Statgraphics Centurion. Dr. Neil W. Polhemus Copy right 2011 by StatPoint Technologies, Inc. Robust Parameter Design Using Statgraphics Centurion Dr. Neil W. Polhemus Copy right 2011 by StatPoint Technologies, Inc. 1 Robust Parameter Designs Experimental designs containing 2 types of factors:

More information

Global Recycled Standard Logo Use and Labeling Guide 2014

Global Recycled Standard Logo Use and Labeling Guide 2014 Textile Exchange Global Recycled Standard, version 3.0 Logo Use and Labeling Guide 2014 Global Recycled Standard Logo Use and Labeling Guide 2014 Copyright: 2014 Textile Exchange 1 Table of Contents Introduction...

More information

MATH 102 College Algebra

MATH 102 College Algebra FACTORING Factoring polnomials ls is simpl the reverse process of the special product formulas. Thus, the reverse process of special product formulas will be used to factor polnomials. To factor polnomials

More information

Fold again, the same way. We now have four equal regions: the shaded part remains the same, of the paper.

Fold again, the same way. We now have four equal regions: the shaded part remains the same, of the paper. PRIMARY CONTENT MODULE V NUMBER SENSE: Rational Numbers T-12 Equivalent Fractions When do two fractions represent the same amount? Or, when do they represent the same point or number on a number line?

More information

Quick Start Guide G-Code/EEC-2400

Quick Start Guide G-Code/EEC-2400 Quick Start Guide G-Code/EEC-2400 This manual provides instructions for quick installation and basic configuration of your IP device. 1. Part names and positions Please check names and positions of each

More information

Sent sent. lavoro licenziamento marittimo ISSN Pubblicato dal 01/04/2010

Sent sent. lavoro licenziamento marittimo ISSN Pubblicato dal 01/04/2010 ISSN 1127-8579 Pubblicato dal 01/04/2010 All'indirizzo http://www.diritto.it/docs/29254-tribunale-di-modica-giudice-del-lavoro-dottssa-sandra-levanti-sentenza-n-74-2008-in-tema-di-irrogazione-di-sanzione-disciplinarenell-ambito-di-rapporto-di-lavoro-nel-settore-marittimo

More information

The Competence of Finnish Nurse Educators

The Competence of Finnish Nurse Educators The Competence of Finnish Nurse Educators Leena Salminen PhD, Senior Lecturer University of Turku Department of Nursing Science FINE conference, 3.-5.10.2012, Cardiff Turku TURKU THE AIM was to assess

More information

Acceptance Page 2. Revision History 3. Introduction 14. Control Categories 15. Scope 15. General Requirements 15

Acceptance Page 2. Revision History 3. Introduction 14. Control Categories 15. Scope 15. General Requirements 15 Acceptance Page 2 Revision History 3 Introduction 14 Control Categories 15 Scope 15 General Requirements 15 Control Category: 0.0 Information Security Management Program 17 Objective Name: 0.01 Information

More information

Chapter 4 BOOLEAN ALGEBRA AND THEOREMS, MIN TERMS AND MAX TERMS

Chapter 4 BOOLEAN ALGEBRA AND THEOREMS, MIN TERMS AND MAX TERMS Chapter 4 BOOLEAN ALGEBRA AND THEOREMS, MIN TERMS AND MAX TERMS Lesson 5 BOOLEAN EXPRESSION, TRUTH TABLE and product of the sums (POSs) [MAXTERMS] 2 Outline POS two variables cases POS for three variable

More information

Topic: Special Products and Factors Subtopic: Rules on finding factors of polynomials

Topic: Special Products and Factors Subtopic: Rules on finding factors of polynomials Quarter I: Special Products and Factors and Quadratic Equations Topic: Special Products and Factors Subtopic: Rules on finding factors of polynomials Time Frame: 20 days Time Frame: 3 days Content Standard:

More information

Arts et politique sous Louis XIV

Arts et politique sous Louis XIV Arts et politique sous Louis XIV Marie Tourneur To cite this version: Marie Tourneur. Arts et politique sous Louis XIV. Éducation. 2013. HAL Id: dumas-00834060 http://dumas.ccsd.cnrs.fr/dumas-00834060

More information

Expected Value of an Estimator

Expected Value of an Estimator Expected Value of an Estimator The statistical expectation of an estimator is useful in many instances. Expectations are an average" taken over all possible samples of size n. The process is fairly simple

More information

2 : two cube. 5 : five cube. 10 : ten cube.

2 : two cube. 5 : five cube. 10 : ten cube. Math 105 TOPICS IN MATHEMATICS REVIEW OF LECTURES VI Instructor: Line #: 52920 Yasuyuki Kachi 6 Cubes February 2 Mon, 2015 We can similarly define the notion of cubes/cubing Like we did last time, 3 2

More information

Les effets de la relaxation sur les apprentissages à l école

Les effets de la relaxation sur les apprentissages à l école Les effets de la relaxation sur les apprentissages à l école Laurine Bouchez To cite this version: Laurine Bouchez. Les effets de la relaxation sur les apprentissages à l école. Éducation. 2012.

More information

Inversion. Chapter 7. 7.1 Constructing The Inverse of a Point: If P is inside the circle of inversion: (See Figure 7.1)

Inversion. Chapter 7. 7.1 Constructing The Inverse of a Point: If P is inside the circle of inversion: (See Figure 7.1) Chapter 7 Inversion Goal: In this chapter we define inversion, give constructions for inverses of points both inside and outside the circle of inversion, and show how inversion could be done using Geometer

More information

How to bet using different NairaBet Bet Combinations (Combo)

How to bet using different NairaBet Bet Combinations (Combo) How to bet using different NairaBet Bet Combinations (Combo) SINGLES Singles consists of single bets. I.e. it will contain just a single selection of any sport. The bet slip of a singles will look like

More information

NON SINGULAR MATRICES. DEFINITION. (Non singular matrix) An n n A is called non singular or invertible if there exists an n n matrix B such that

NON SINGULAR MATRICES. DEFINITION. (Non singular matrix) An n n A is called non singular or invertible if there exists an n n matrix B such that NON SINGULAR MATRICES DEFINITION. (Non singular matrix) An n n A is called non singular or invertible if there exists an n n matrix B such that AB = I n = BA. Any matrix B with the above property is called

More information

USB HID to PS/2 Scan Code Translation Table

USB HID to PS/2 Scan Code Translation Table Key Name HID Usage Page HID Usage ID PS/2 Set 1 Make* PS/2 Set 1 Break* PS/2 Set 2 Make PS/2 Set 2 Break System Power 01 81 E0 5E E0 DE E0 37 E0 F0 37 System Sleep 01 82 E0 5F E0 DF E0 3F E0 F0 3F System

More information

www.sakshieducation.com

www.sakshieducation.com LENGTH OF THE PERPENDICULAR FROM A POINT TO A STRAIGHT LINE AND DISTANCE BETWEEN TWO PAPALLEL LINES THEOREM The perpendicular distance from a point P(x 1, y 1 ) to the line ax + by + c 0 is ax1+ by1+ c

More information

http://jsuniltutorial.weebly.com/ Page 1

http://jsuniltutorial.weebly.com/ Page 1 Parallelogram solved Worksheet/ Questions Paper 1.Q. Name each of the following parallelograms. (i) The diagonals are equal and the adjacent sides are unequal. (ii) The diagonals are equal and the adjacent

More information

CM2202: Scientific Computing and Multimedia Applications General Maths: 2. Algebra - Factorisation

CM2202: Scientific Computing and Multimedia Applications General Maths: 2. Algebra - Factorisation CM2202: Scientific Computing and Multimedia Applications General Maths: 2. Algebra - Factorisation Prof. David Marshall School of Computer Science & Informatics Factorisation Factorisation is a way of

More information

Chapter 3. Maximum Mortgage Amounts on Refinance Transactions Table of Contents

Chapter 3. Maximum Mortgage Amounts on Refinance Transactions Table of Contents Chapter 3, Table of Contents Chapter 3. Maximum Mortgage Amounts on Refinance Transactions Table of Contents Section A. Refinance Transaction Overview Overview... 3-A-1 1. General Information on Refinance

More information

Lesson 12.1 Skills Practice

Lesson 12.1 Skills Practice Lesson 12.1 Skills Practice Name Date Introduction to Circles Circle, Radius, and Diameter Vocabulary Define each term in your own words. 1. circle A circle is a collection of points on the same plane

More information

ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS

ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS ASTM, SAE AND ISO GRADE MARKINGS AND MECHANICAL PROPERTIES FOR STEEL FASTENERS Nominal Mechanical Properties Identification Fastener Size Specification Material Proof Yield Tensile Grade Description Range

More information

Final Review Chapter 5

Final Review Chapter 5 Name: Class: Date: Final Review Chapter 5 Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Find the length of the midsegment. The diagram is not to scale.

More information

Electricity Supply (General) Amendment (Large Customers) Regulation 2005

Electricity Supply (General) Amendment (Large Customers) Regulation 2005 New South Wales Electricity Supply (General) Amendment (Large Customers) Regulation 2005 under the Electricity Supply Act 1995 His Excellency the Lieutenant-Governor, with the advice of the Executive Council,

More information

Operations with Algebraic Expressions: Multiplication of Polynomials

Operations with Algebraic Expressions: Multiplication of Polynomials Operations with Algebraic Expressions: Multiplication of Polynomials The product of a monomial x monomial To multiply a monomial times a monomial, multiply the coefficients and add the on powers with the

More information

N.C. State University; Entomology Department

N.C. State University; Entomology Department Insect Code 5/28/03 5/28/03 5/28/03 6/4/03 6/4/03 6/4/03 6/11/03 6/11/03 6/11/03 Crop Code No. of No. of No. of No. of No. of No. of No. of No. of No. of Rating Data Type Adult Immature Total Adult Immature

More information

4. Binomial Expansions

4. Binomial Expansions 4. Binomial Expansions 4.. Pascal's Triangle The expansion of (a + x) 2 is (a + x) 2 = a 2 + 2ax + x 2 Hence, (a + x) 3 = (a + x)(a + x) 2 = (a + x)(a 2 + 2ax + x 2 ) = a 3 + ( + 2)a 2 x + (2 + )ax 2 +

More information

ZN-NH22XE Quick User Guide

ZN-NH22XE Quick User Guide ZN-NH22XE Quick User Guide This manual has been designed to guide you through basic installation, configuration and the webpage access settings of the device. Step1. Install the lens 1. Place the lens

More information

List of Standard Counting Problems

List of Standard Counting Problems List of Standard Counting Problems Advanced Problem Solving This list is stolen from Daniel Marcus Combinatorics a Problem Oriented Approach (MAA, 998). This is not a mathematical standard list, just a

More information

Functional Dependencies

Functional Dependencies Functional Dependencies Using FD s to determine global IC s: Step 1: Given schema R = {A1,..., An} use key constraints, laws of physics, trial-and-error, etc... to determine an initial FD set, F. Step

More information

0-320-A, E (LOW SL75413A STEEL SL74989 SL74989 SL73857A COMPRESSION) SL75413A CHROME SL74673A SL74673A SL73998A (WIDE DECK)

0-320-A, E (LOW SL75413A STEEL SL74989 SL74989 SL73857A COMPRESSION) SL75413A CHROME SL74673A SL74673A SL73998A (WIDE DECK) ENGINE PISTON BARREL MODEL SURFACE COMP- COMP- COMP- CONTROL SCRAPPER RING RING RING RING RING 0-235-F1B, F2A, LW11621 SL78862 SL78862 SL78864 F2B, G1A, G2A, LW11621 SL14234 SL14234 SL14235 J2A LW18725

More information

EXAMINATION POINT SCORES USED IN THE 2013 SCHOOL AND COLLEGE PERFORMANCE TABLES

EXAMINATION POINT SCORES USED IN THE 2013 SCHOOL AND COLLEGE PERFORMANCE TABLES 1. To enable the calculation of average point scores for pupils at the end of key stage 4 and 16-18 year olds at the end of advanced level studies. Points are allocated to each of a pupil s exam results

More information

The illustrations in this manual may differ from the product you are using.

The illustrations in this manual may differ from the product you are using. The illustrations in this manual may differ from the product you are using. 1 1 2 1 2 3 1 4 1 5 6 7 8 9 Youkei No.4 (105 mm 235 mm) (Envelope Y401 for Canon LBP/recommended) * You cannot use envelopes

More information

PROVISIONAL GRADE CARD

PROVISIONAL GRADE CARD AJITA PANDEY Enrolment No. : MT15CTM001 CEL406 ADVANCED CONCRETE TECHNOLOGY 3 BB CEL409 QUALITY AND SAFETY IN CONSTRUCTION 3 AA CEL442 GEOTECHNICAL INVESTIGATION OF CONSTRUCTION 3 BB PROJECT (DE) CEL519

More information

Parallax Serial LCD 2 rows x 16 characters Non-backlit (#27976) 2 rows x 16 characters Backlit (#27977) 4 rows x 20 characters Backlit (#27979)

Parallax Serial LCD 2 rows x 16 characters Non-backlit (#27976) 2 rows x 16 characters Backlit (#27977) 4 rows x 20 characters Backlit (#27979) 599 Menlo Drive, Suite 100 Rocklin, California 95765, USA Office: (916) 624-8333 Fax: (916) 624-8003 General: info@parallax.com Technical: support@parallax.com Web Site: www.parallax.com Educational: www.stampsinclass.com

More information

Les identités féminines dans le conte traditionnel occidental et ses réécritures : une perception actualisée

Les identités féminines dans le conte traditionnel occidental et ses réécritures : une perception actualisée Les identités féminines dans le conte traditionnel occidental et ses réécritures : une perception actualisée des élèves Sarah Brasseur To cite this version: Sarah Brasseur. Les identités féminines dans

More information

TIgeometry.com. Geometry. Angle Bisectors in a Triangle

TIgeometry.com. Geometry. Angle Bisectors in a Triangle Angle Bisectors in a Triangle ID: 8892 Time required 40 minutes Topic: Triangles and Their Centers Use inductive reasoning to postulate a relationship between an angle bisector and the arms of the angle.

More information

Indeterminate Analysis Force Method 1

Indeterminate Analysis Force Method 1 Indeterminate Analysis Force Method 1 The force (flexibility) method expresses the relationships between displacements and forces that exist in a structure. Primary objective of the force method is to

More information

a measurable difference...

a measurable difference... The Tool Steel Cutting Dies are used for the cutting of plastics, paper, textiles and rubber samples. They can be used along with IDM cutting presses for sample preparation. Applications: Cardboard Foam

More information

Boolean Algebra Part 1

Boolean Algebra Part 1 Boolean Algebra Part 1 Page 1 Boolean Algebra Objectives Understand Basic Boolean Algebra Relate Boolean Algebra to Logic Networks Prove Laws using Truth Tables Understand and Use First Basic Theorems

More information

1.4. Removing Brackets. Introduction. Prerequisites. Learning Outcomes. Learning Style

1.4. Removing Brackets. Introduction. Prerequisites. Learning Outcomes. Learning Style Removing Brackets 1. Introduction In order to simplify an expression which contains brackets it is often necessary to rewrite the expression in an equivalent form but without any brackets. This process

More information

DATING YOUR GUILD 1952-1960

DATING YOUR GUILD 1952-1960 DATING YOUR GUILD 1952-1960 YEAR APPROXIMATE LAST SERIAL NUMBER PRODUCED 1953 1000-1500 1954 1500-2200 1955 2200-3000 1956 3000-4000 1957 4000-5700 1958 5700-8300 1959 12035 1960-1969 This chart displays

More information

Foot Inspired King James Doctrine and Book of note Version Bible Covenants Mormon 1 ENOCH CITY Genesis 7:27,78 Section 36:3a;5a Section 36:14e 2 THE

Foot Inspired King James Doctrine and Book of note Version Bible Covenants Mormon 1 ENOCH CITY Genesis 7:27,78 Section 36:3a;5a Section 36:14e 2 THE Foot Inspired King James Doctrine and Book of note Version Bible Covenants Mormon 1 ENOCH CITY Genesis 7:27,78 Section 36:3a;5a Section 36:14e 2 THE RESURRECTION Genesis 7:63-64 Matthew 27:52-53 Mosiah

More information

Applications of Fermat s Little Theorem and Congruences

Applications of Fermat s Little Theorem and Congruences Applications of Fermat s Little Theorem and Congruences Definition: Let m be a positive integer. Then integers a and b are congruent modulo m, denoted by a b mod m, if m (a b). Example: 3 1 mod 2, 6 4

More information

Quick Installation Guide

Quick Installation Guide O1 N 2 3 4 5 6 7 8 O1 N 2 3 4 5 6 7 8 Quick Installation Guide This manual has been designed to guide you through basic settings of your IP devices, such as installation and configuration for using them.

More information

Chapter 2. DE Lender Application and Approval/Lender Insurance Program (LI) Eligibility & Approval Table of Contents

Chapter 2. DE Lender Application and Approval/Lender Insurance Program (LI) Eligibility & Approval Table of Contents Chapter 2, Table of Contents Chapter 2. DE Lender Application and Approval/Lender Insurance Program (LI) Eligibility & Approval Table of Contents Section A. Direct Endorsement (DE) Program Lender Application

More information

Chosen problems and their final solutions of Chap. 2 (Waldron)- Par 1

Chosen problems and their final solutions of Chap. 2 (Waldron)- Par 1 Chosen problems and their final solutions of Chap. 2 (Waldron)- Par 1 1. In the mechanism shown below, link 2 is rotating CCW at the rate of 2 rad/s (constant). In the position shown, link 2 is horizontal

More information

VISIX Time of Flight People Tracking Camera VX-VTOF-01 Quick Start Guide v VISIX Time of Flight Quick Start Guide VX-VTOF-01

VISIX Time of Flight People Tracking Camera VX-VTOF-01 Quick Start Guide v VISIX Time of Flight Quick Start Guide VX-VTOF-01 VISIX Time of Flight Quick Start Guide VX-VTOF-01 VISIX Time of Flight People Tracking Camera VX-VTOF-01 Quick Start Guide v01-2016 10385 Westmoor Drive, Suite 210, Westminster, CO 80021 www.3xlogic.com

More information

Geometry Chapter 7. Ratios & Proportions Properties of Proportions Similar Polygons Similarity Proofs Triangle Angle Bisector Theorem

Geometry Chapter 7. Ratios & Proportions Properties of Proportions Similar Polygons Similarity Proofs Triangle Angle Bisector Theorem Geometry Chapter 7 Ratios & Proportions Properties of Proportions Similar Polygons Similarity Proofs Triangle Angle Bisector Theorem Name: Geometry Assignments Chapter 7 Date Due Similar Polygons Section

More information

MB2-707: Version: Microsoft Dynamics CRM Customization. and Configuration. Demo

MB2-707: Version: Microsoft Dynamics CRM Customization. and Configuration. Demo MB2-707: Version: Microsoft Dynamics CRM Customization and Configuration Demo 1. You are a Microsoft Dynamics CRM consultant. You are assigned a new implementation. Before you configure the customer's

More information

Math 531, Exam 1 Information.

Math 531, Exam 1 Information. Math 531, Exam 1 Information. 9/21/11, LC 310, 9:05-9:55. Exam 1 will be based on: Sections 1A - 1F. The corresponding assigned homework problems (see http://www.math.sc.edu/ boylan/sccourses/531fa11/531.html)

More information

THE DISTANCE FORMULA

THE DISTANCE FORMULA THE DISTANCE FORMULA In this activity, you will develop a formula for calculating the distance between any two points in a coordinate plane. Part 1: Distance Along a Horizontal or Vertical Line To find

More information