Needle Valves. SM Series. Needle Valves - SM Series. Medium Pressure Valve Features: Medium Pressure. Pressures to 20,000 psi (1379 bar)

Transcription

1 Needle Valves edium Pressure S Series Pressures to 20,000 psi (1379 bar) Since 1945 Parker utoclave ngineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Parker utoclave ngineers a reputation for reliable efficient product performance. Parker utoclave ngineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical, waterblast, research, and oil and gas industries. edium Pressure Valve eatures: Largest-port valves available for medium pressure applications. Tubing sizes available from 1/4 to 1. Rising stem/barstock body design. Non-rotating stem prevents stem/seat galling. New one piece stem design permits ease of assembly and packing replacement. etal-to-metal seating achieves bubble-tight shut-off, longer stem/seat life in abrasive flow, greater durability for repeated on/off cycles and excellent corrosion resistance. PT encapsulated packing provides dependable stem and body sealing. Stem sleeve and packing gland materials have been selected to achieve extended thread cycle life and reduced handle torque. hoice of Vee or Regulating stem tip. vailable in five body patterns. Parker utoclave ngineers valves are complemented by a complete line of fittings, tubing, check valves and line filters. The S Series uses Parker utoclave ngineers edium pressure connection. The coned-and-threaded connection features orifice sizes to match the high flow characteristics of this series. Note: S Series replaces 20S Series. Needle Valves - S Series edium Pressure

2 Number of turns open Needle Valves - S Series Pressures to 20,000 psi (1379 bar) Tube Pressure Rating iameter Orifice psi (bar) Size onnection Size Room Inches Type Inches (mm) v * Temperature** 1/4 S250X (3.18) ,000 (1379) 3/8 S375X (5.56) ,000 (1379) 9/16 S562X (7.92) ,000 (1379) 3/4 S750X (11.13) ,000 (1379) 1 S1000X (14.27) ,000 (1379) 9/16 S562X (9.12) ,000 (690) 3/4 S750X (13.10) ,000 (690) 1 S1000X (17.48) ,000 (690) Notes: * V values shown are for 2-way straight valve pattern. or 2-way angle patterns, increase V value 50%. (ased on water) ** or complete temperature ratings see pressure/temperature rating guide in Technical Information section. eneralized low oefficient urves ( v ) 7 6 LOW RITION LUINU RONZ PKIN LN POWR OT STINLSS STL HNL ON PI NON-ROTTIN ST LOKIN VI 5 4 Regulating Stem NTI-XTRUSION K-UP RINS JUSTL PKIN LOW THRS 3 2 OL WORK TYP 316 SS OY IN IV PTTRNS 1 Vee Stem 0 HOI O V OR RULTIN ST TIP TL-TO-TL STIN IU PRSSUR ON-N-THR ONNTIONS % of rated v To ensure proper fit use utoclave tubing Ordering Procedure or complete information on available stem types, optional connections and additional valve options, see Needle Valve Options section or contact your Sales Representative. 10S and 20S Series valves are furnished complete with connection components, unless otherwise specified. Typical catalog number: 20S S Valve Series 10S 20S 4 iameter Tube Size 4-1/4 6-3/8 9-9/ / Stem/Seat Type 07 - non-rotating Vee stem (on-off service) 08 - non-rotating regulating stem (tapered tip for regulating and shutoff) 87 - Vee stem with replaceable seat 88 - Regulating stem with replaceable seat 1 ody Pattern 1 - two-way straight 2 - two-way angle 3 - three-way, two on pressure 4 - three-way, one on pressure 5 - three-way, two stem manifold valve 2 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. XX Options or extreme temperature and other options, see Valve Options.

3 Valve Options xtreme Temperatures Standard Parker utoclave ngineers valves with PT packing may be operated from 0 (-17.8 ) to 450 (232 ). High temperature packing and/or extended stuffing box are available for service from -423 (-252 ) to 1200 (649 ) by adding the following suffixes to catalog order number. T standard valve with PT glass packing to 600 (316 ). Y standard valve with graphite braided yarn packing to 800 (427 ). Note: 3/4 rated 8000 psi (552 bar) and 1 rated 6000 psi (412 bar) maximum with graphite yarn packing. HT extended stuffing box valve with graphite braided yarn packing to 1200 (649 ). standard valve with cryogenic trim materials and PT packing to -100 (-73 ). LT extended stuffing box valve with PT packing and cryogenic trim materials to -423 (-252 ). K anti-vibration collet and gland assembly Valve aintenance Repair Kits: add R to the front of valve catalog number for proper repair kit. (xample: R20S4071) Valve odies: Valve bodies are available. Order using the eight (8) digit part number found on the valve drawing or contact your Sales Representative for information. onsult your Parker utoclave ngineersrepresentative for pricing on repair kits and valve bodies. Refer to the Tools, Installation, Operation and aintenance section for proper maintenance procedures. Note: aution should be exercised in proper selection of medium pressure tubing based on actual operating conditions. Two tubing series available in some sizes: 15,000 psi (1034 bar) and 20,000 psi (1380 bar). needle valve options for stem and seat coating for erosive service. lock imensions - inches (mm) atalog Stem iameter Orifice Thick- Valve Number Type Tube iameter 1 H* N ness Pattern 2-Way Straight 20S4071 V 1/ S4081 R (6.35) (3.18) (50.80) (25.40) (9.65) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (119.13) (15.75) (9.65) (19.05) 20S6071 V 3/ S6081 R (9.53) (5.56) (50.80) (25.40) (11.94) (41.15) (30.23) (50.80) (76.20) (19.05) (5.59) (117.48) (15.75) (9.65) (19.05) 20S9071 V 9/ S9081 R (14.29) (7.92) (63.50) (31.75) (13.46) (60.45) (44.45) (73.15) (101.60) (25.40) (8.64) (150.86) (17.53) (12.70) (25.40) 20S12071 V 3/ S12081 R (19.05) (11.13) (76.20) (38.10) (15.75) (76.20) (57.15) (95.25) (260.35) (28.45) (11.18) (177.80) (22.35) (16.00) (35.05) 20S16071 V S16081 R (25.40) (14.27) (104.65) (52.32) (16.00) (95.25) (71.37) (117.60) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.4 5) 10S9071 V 9/ S9081 R (14.29) (9.12) (63.50) (31.75) (13.46) (60.45) (44.45) (73.15) (101.60) (25.40) (8.64) (150.86) (17.53) (12.70) (25.40) 10S12071 V 3/ S12081 R (19.05) (13.11) (76.20) (38.10) (15.75) (76.20) (57.15) (95.25) (260.35) (28.45) (11.18) (177.80) (22.35) (16.00) (35.05) 10S16071 V S16081 R (25.40) (17.48) (104.65) (52.32) (16.00) (95.25) (71.37) (117.60) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.45) igure 1 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure 1 H N 1 2-Way Straight ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 3

4 lock imensions - inches (mm) atalog Stem iameter Orifice Thick- Valve Number Type Tube iameter 1 H* N ness Pattern 2-Way ngle 20S4072 V 20S4082 R 20S6072 V 20S6082 R 20S9072 V 20S9082 R 20S12072 V 20S12082 R 20S16072 V 20S16082 R 10S9072 V 10S9082 R 10S12072 V 10S12082 R 10S16072 V 10S16082 R 1/ (6.35) (3.18) (50.80) (25.40) (9.65) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05) 3/ (9.53) (5.56) (50.80) (25.40) (11.94) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05) 9/ (14.29) (7.92) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (163.56) (17.53) (12.70) (25.40) 3/ (19.05) (11.13) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05) (25.40) (14.27) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.4 5) 9/ (14.29) (9.12) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (163.56) (17.53) (12.70) (25.40) 3/ (19.03) (13.11) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05) (25.40) (17.48) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (228.84) (31.75) (28.70) (44.45) igure 2 3-Way / 2 on Pressure 20S4073 V 1/ S4083 R (6.35) (3.18) (50.80) (25.40) (9.65) (41.28) (30.23) (66.68) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) 20S6073 V 3/ S6083 R (9.53) (5.56) (50.80) (25.40) (11.94) (41.28) (30.23) (66.68) (76.20) (19.05) (5.59) (127.00) (15.75) (9.65) (19.05) 20S9073 V 9/ S9083 R (14.29) (7.92) (63.50) (31.75) (13.46) (60.45) (44.45) (92.08) (101.60) (25.40) (8.64) (165.59) (17.53) (12.70) (25.40) 20S12073 V 3/ S12083 R (19.05) (11.13) (76.20) (38.10) (15.75) (76.20) (57.15) (117.48) (260.35) (28.45) (11.18) (200.03) (22.35) (16.00) (35.05) 20S16073 V S16083 R (25.40) (14.27) (104.65) (52.32) (16.00) (95.25) (71.37) (149.35) (260.35) (41.15) (14.22) (247.89) (31.75) (28.70) (44.4 5) 10S9073 V 9/ S9083 R (14.29) (9.12) (63.50) (31.75) (13.46) (60.45) (44.45) (92.08) (101.60) (25.40) (8.64) (165.59) (17.53) (12.70) (25.40) 10S12073 V 3/ S12083 R (19.03) (13.11) (76.20) (38.10) (15.75) (76.20) (57.15) (117.48) (260.35) (28.45) (11.18) (200.03) (22.35) (16.00) (35.05) 10S16073 V S16083 R (25.40) (17.48) (104.65) (52.32) (16.00) (95.25) (71.37) (149.35) (260.35) (41.15) (14.22) (247.89) (31.75) (28.70) (44.45) igure 3 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure 2 igure 3 H N H N 1 2-Way ngle 3-Way / 2 on Pressure 4 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

5 lock imensions - inches (mm) atalog Stem iameter Orifice Thick- Valve Number Type Tube iameter 1 H* N ness Pattern 3-Way / 1 on Pressure 20S4074 V 1/ S4084 R (6.35) (3.18) (50.80) (25.40) (9.65) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05) 20S6074 V 3/ S6084 R (9.53) (5.56) (50.80) (25.40) (11.94) (30.23) (61.90) (76.20) (19.05) (5.59) (122.25) (15.75) (9.65) (19.05) 20S9074 V 9/ S9084 R (14.29) (7.92) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (160.56) (17.53) (12.70) (25.40) 20S12074 V 3/ S12084 R (19.05) (11.13) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05) 20S16074 V S16084 R (25.40) (14.27) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (231.13) (31.75) (28.70) (44.4 5) 10S9074 V 9/ S9084 R (14.29) (9.12) (63.50) (31.75) (13.46) (44.45) (85.85) (101.60) (25.40) (8.64) (160.56) (17.53) (12.70) (25.40) 10S12074 V 3/ S12084 R (19.03) (13.11) (76.20) (38.10) (15.75) (57.15) (107.95) (260.35) (28.45) (11.18) (190.50) (22.35) (16.00) (35.05) 10S16074 V S16084 R (25.40) (17.48) (104.65) (52.32) (16.00) (71.37) (130.05) (260.35) (41.15) (14.22) (231.13) (31.75) (28.70) (44.45) igure 4 2-Way ngle / Replaceable Seat 20S4872 V 20S4882 R 20S6872 V 20S6882 R 20S9872 V 20S9882 R 20S12872 V 20S12882 R 20S16872 V 20S16882 R 10S9872 V 10S9882 R 10S12872 V 10S12882 R 10S16872 V 10S16882 R 1/ (6.35) (3.18) (50.80) (25.40) (9.65) (30.23) (53.98) (57.15) (76.20) (19.05) (5.59) (146.05) (15.75) (9.65) (19.05) 3/ (9.53) (5.56) (50.80) (25.40) (11.94) (30.23) (53.98) (57.15) (76.20) (19.05) (5.59) (146.05) (15.75) (9.65) (19.05) 9/ (14.29) (7.92) (63.50) (31.75) (13.46) (44.45) (63.50) (79.38) (101.60) (25.40) (8.64) (186.68) (17.53) (12.70) (25.40) 3/ (19.05) (11.13) (76.20) (38.10) (15.75) (57.15) (87.38) (107.95) (260.35) (28.45) (11.18) (228.60) (22.35) (16.00) (35.05) (25.40) (14.27) (104.65) (52.32) (16.00) (68.33) (111.13) (133.35) (260.35) (41.15) (14.22) (279.64) (31.75) (28.70) (44.4 5) 9/ (14.29) (9.12) (63.50) (31.75) (13.46) (44.45) (63.50) (85.85) (101.60) (25.40) (8.64) (186.68) (17.53) (12.70) (25.40) 3/ (19.03) (13.11) (76.20) (38.10) (15.75) (57.15) (87.38) (107.95) (260.35) (28.45) (11.18) (228.60) (22.35) (16.00) (35.05) (25.40) (17.48) (104.65) (52.32) (16.00) (68.33) (111.13) (133.35) (260.35) (41.15) (14.22) (279.64) (31.75) (28.70) (44.45) igure 5 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure 4 igure 5 H N N H 1 3-Way / 1 on Pressure 2-Way ngle / Replaceable Seat ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 5

6 lock imensions - inches (mm) atalog Stem iameter Orifice Thick- Valve Number Type Tube iameter 1 H* N ness Pattern 3-Way / 2-Stem anifold 20S4075 V 20S4085 R 20S6075 V 20S6085 R 20S9075 V 20S9085 R 20S12075 V 20S12085 R 20S16075 V 20S16085 R 10S9075 V 10S9085 R 10S12075 V 10S12085 R 10S16075 V 10S16085 R 1/ (6.35) (3.18) (50.80) (25.40) (9.65) (42.85) (30.15) (85.73) (76.20) (19.05) (5.59) (144.50) (15.75) (9.65) (19.05) 3/ (9.53) (5.56) (50.80) (25.40) (11.94) (42.85) (30.15) (85.73) (76.20) (19.05) (5.59) (144.50) (15.75) (9.65) (19.05) 9/ (14.29) (7.92) (63.50) (31.75) (13.46) (65.07) (44.45) (130.18) (101.60) (25.40) (8.64) (206.5) (17.53) (12.70) (25.40) 3/ (19.05) (11.13) (76.20) (38.10) (15.75) (82.55) (57.15) (165.10) (260.35) (28.45) (11.18) (247.65) (22.35) (16.00) (35.05) (25.40) (14.27) (104.65) (52.32) (16.00) (95.25) (71.37) (190.50) (260.35) (41.15) (14.22) (309.40) (31.75) (28.70) (44.4 5) 9/ (14.29) (9.12) (63.50) (31.75) (13.46) (65.07) (44.45) (130.18) (101.60) (25.40) (8.64) (206.5) (17.53) (12.70) (25.40) 3/ (19.03) (13.11) (76.20) (38.10) (15.75) (82.55) (57.15) (165.10) (260.35) (28.45) (11.18) (247.65) (22.35) (16.00) (35.05) (25.40) (17.48) (104.65) (52.32) (16.00) (95.25) (71.37) (190.50) (260.35) (41.15) (14.22) (309.40) (31.75) (28.70) (44.45) igure 6 - Packing gland mounting hole drill size - racket mounting hole size Panel mounting drill size: 0.22 all valves. * H imension is with stem in closed position. ll dimensions for reference only and subject to change. or prompt service, Parker utoclave ngineers stock select products. onsult factory. igure 6 H N Way / 2-Stem anifold 6 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold.

7 ll general terms and conditions of sale, including limitations of our liability, apply to all products and services sold. 7

8 WRNIN ILUR, IPROPR SLTION OR IPROPR US O TH PROUTS N/OR SYSTS SRI HRIN OR RLT ITS N US TH, PRSONL INJURY N PROPRTY. This document and other information from Parker Hannifin orporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin orporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are available for sale by Parker Hannifin orporation, its subsidiaries or its authorized distributors. ny sale contract entered by Parker will be governed by the provisions stated in Parker's standard terms and conditions of sale (copy available upon request) Parker Hannifin orporation utoclave ngineers is a registered trademark of the Parker Hannifin orporation S January2013 Instrumentation Products ivision utoclave ngineers Operation 8325 Hessinger rive rie, Pennsylvania US PH: X: Parker Hannifin anufacturing Ltd. Instrumentation Products ivision, urope Industrial state Whitemill Wexford, Republic of Ireland PH: X: aution! o not mix or interchange parts or tubing with those of other manufacturers. oing so is unsafe and will void warranty. aution! Parker utoclave ngineers Valves, ittings and Tools are not designed to work with common commercial instrument tubing and will only work with tubing built to Parker utoclave ngineers S Specifications. ailure to do so will void warranty. ISO-9001 ertified