LIGHTING FOR VEIHCLES

Transcription

1 PROFESSIONAL LIGHTING FOR VEIHCLES

2 2 INNOVATIVE A LIGHTS WITH LIGHTS FOR THOSE WHO REQUIRE SOMETHING EXTRA STRANDS IS ONE OF THE LARGEST WHOLESALE AND MANUFACTURING COMPANIES IN ELECTRICAL LIGHTING AND ACCESSORIES FOR COMMERCIAL VEHICLES INDUSTRY. We deliver products that are fully tested and approved for the professional market. We carefully select raw materials and constantly work with product developing. We provide the market with products made for the tough nordic climate. A SAFE INVESTMENT A product from us guarantees quality, functionality, and outstanding design. We are supplying distributors and wholesalers throughout Europe and are constantly looking for new potential partners. To buy equipment from any of Strands product lines is a safe investment in innovative technologies.

3 3 ND MODERN POWER. appealing BOXES boosts SALES Distributors all over Europe! HALOGEN/HID/ HALOGEN Halogen has a short lifetime compared to and xenon (about 500 hours if conditions are normal). Replacement costs are lower than xenon and. One of the disadvatages, compared to and xenon, is that they are more energy consuming. XENON/HID Xenon/HID (high intensity discharge) lights have a longer lifetime than halogen lights and are more efficient as they use less power (lifetime up towards 6000 hours) They also give a better visibility for the driver. lights (Light-emitting diode) are chosen for many reasons. They offer an outstanding lifetime (lifetime up towards hours). They don t burn out and stop working like a standard light, the lighting diodes emit lower output levels over a very long period of time. s produce more light per watt than standard bulbs. Their efficiency is not affected by shape or size. s lights up quickly and achieves full brightness in microseconds.

4 4 MORA Mora is a lamp in the performance class of most HID/ xenon lamps but with a power consumtion of only 24 watt. Dual cells from OSRAM is what gives you all that power that together with the specially designed reflector produces a fantastic result. The light flows out of MORA with a combination of length and width that gives you increased safety and a relaxing drive. Mora will start at full power immediately and has none of the startup lag of the HID/xenon lamps. ECE-approved as driving light Aluminum housing Polycarbonate lens with extra surface treatment Reflector in ABS-plastic Pedestal mounting with the included hardware 24W Osram 9-32V 228,54x233,67x128,66mm Part No

5 5 LYCKSELE HID/XENON A full size lamp with aluminum housing and a look to match todays modern cars. Integrated DRL that can be dimmed down to position light strenght. Matching mounting hardware. Available in 12 and 24 volts and as pencil light. ECE-approved as driving light Free-form reflector, multi reflector Hardend glass lens Piedestal mounting with steel bracket D1S 85V 35W (with GE components) D1S ballast DRL (Daytime Running Light) DRL 5.5W, Cree chip Dimensions: 228 x 224 x 122 mm DRIVING LIGHTS HID Part No V, P 24V pencil, V, P 12V pencil HID SORSELE HID/XENON A smaller lamp with aluminum housing and a look to match todays modern cars. Integrated DRL that can be dimmed down to position light strenght. Matching mounting hardware. ECE-approved as driving light Free-form reflector, multi reflector Hardend glass lens Piedestal mounting with steel bracket. D1S 85V 35W (with GE components) D1S ballast. Multivoltage 9-32V DRL (Daytime Running Light) DRL 3,6W, Cree chip Dimensions: 172,53x171,65x114,19mm Part No

6 6 DRIVING LIGHTS LJUSDAL SLIM HALOGEN ECE-approved as driving light Free-form reflector Available in driving, pencil light patterns Re-enforced durable plastic housing Hardened glass lens H7 halogen bulb and T10 position bulb (not included) 12V or 24V Transparent cover in polycarbonate plastic for permanent use (not included) Dimensions: 223,5x235,25x122,02mm HALOGEN Part No clear lens, P clear lens pencil, blue lens, P blue lens pencil NARVIK HID/XENON ECE-approved as driving light Free-form reflector Re-enforced durable plastic housing Hardened glass lens Mounting bracket in steel D1S xenon/hid (35W) light source (with GE-components) Ballast integrated, multivoltage 9-32V Transparent cover in polycarbonate plastic for permanent use Dimensions: 223,5x243,61x146,7mm. T10 position bulb (not included) HID Part No , P Pencil

7 7 WORK LIGHTS WORK LIGHT 90W WORK LIGHT 30W Power: 90W 8100Lumen Operating Voltage: 10-30V DC Waterproof rate: IP 68 9x10w high intensity CREE Current draw: Color Temperature: 6000K Material: Diecast aluminum housing Lens material: PC Mounting Bracket: Stainless Steel hours above life time Size: 135x160x124 mm. Operating Voltage: 10-30V DC Waterproof rate: IP67 6pcs x 5W Cree s 2600Lumen Current draw: 1.8A@12V, 1A@24V Color temperature: 6000K Material: Die-cast Aluminum Housing Lens material: PC Mounting Bracket: Stainless Steel Beam Pattern: Flood 60 degree Lifetime ~ hours Part No Part No HID HID Worklight 35W HID/XENON Worklight 50W HID/XENON A hardcore lamp with extruded aluminum housing and a heavy-duty adjustable mounting system. The massive output of 5200Lumen will give you a safe and pleasant working environment. D1S light source from OSRAM, built in ballast from OSRAM. IP69K. Work light pattern 24V. Part No A hardcore lamp with extruded aluminum housing and a heavyduty adjustable mounting system. The output of 32500Lumen will give you a perfect working environment. D1S light source from OSRAM, built in ballast from OSRAM. IP69K. Avilable as 12 or 24 volts. Light patterns: Work light, Long beam and Square beam. Part No V, kvadrat 24V square beam, helljus 24V long beam, V, kvadrat 12V square beam, helljus 12V long beam

8 8 ECONOMY LINE WORKLAMP 18W WORKLAMP 27W 10-30V, 18W, 1080 Lumen.159,8x47,5x63mm. IP67. Work light pattern. Epistar V, 27W, 1620 Lumen. 128x110x55mm. IP67. Work light pattern. Epistar. Part No Part No XENON WORKLAMP WORKLAMP 35W HID/Xenon 10-70V. 110x108x67mm. IP67. Work light pattern. 9-32V, 3200 Lumen. 120x110x140mm. IP65. Work light pattern. Part No Lumen, Lumen Part No OUR WORK LIGHTS ARE THOROUGHLY TESTED IN THE NORDIC CLIMATE THE TOUGHEST IN THE WORLD. XENON WE USE PARTS FROM CREE, EPISTAR AND OTHER LEADING MANUFACTURERS. TOGETHER WITH A WELL DESIGNED HOUSING AND ADEQUATE COOLING IT GIVES YOU PROFESSIONAL PERFOR- MANCE. MOST OF OUR LIGHTS ARE ALREADY OR IS IN THE PROCESS OF BEING CERTIFIED AS CE, ROHS, EMC DIRECTIVE 2004/108/EC. WORKLAMP 35W HID/Xenon 9-32V, 3000 Lumen. 130x140x125mm IP65. Work light pattern. Part No

9 9 WORK LIGHTS WORKLAMP 18W WORKLAMP 42W 10-30V, 6000K, 10W, 900 Lumen. 66x66x65mm. IP67. Work light pattern. Cree V, 42W, 2520 Lumen. 117x128x76mm. IP67. Work light pattern. Epistar. Part No Part No WORKLAMP 15W WORKLAMP 50W 10-30V, 15W, 900 Lumen. 110x110x40mm. IP67. Work light pattern. Epistar V, 50W, 4500 Lumen. 144,5x135x78,5mm. IP67. Work light pattern. Cree. Part No Part No WORKLAMP 18W WORKLAMP 48W 10-30V, 18W, 1080 Lumen. 115x115x40mm. IP67. Work light pattern. Epistar V, 48W, 2880 Lumen. 115x115x72 mm. IP67. Work light pattern. Epistar. Part No Part No

10 10 BAR 6 LIGHTS 10-30V, 30W, 2700Lumen. 276x74,5x68,5mm. IP67. 8 Spot beam. BAR V, 90W, 8100Lumen. 756x74,5x68,5mm. IP67. 8 spot beam. Part No Part No BAR 12 bar V, 60W, 5400Lumen. 516x74,5x68,5mm. IP67. 8 spot beam. Part No V, 120W. Cree 10800Lumen. 996x74,5x68,5mm. IP67. 8 spot beam. Part No WORK/reversing light Universal lamp with dual functions that works as a reversing light and a work light. Approval: E20 10R Approval: AR 00 E * Power consumption: 15 W IP Class: IP66 / IP68 (Resistance when immersed in water and spraying a powerful jet of water) Operating voltage: 10V - 35V Connection: GND - white wire, + working light black wire, reversing light yellow wire *. Body: PP Connection cable: 2.5 m 12 light source (Osram) Easy and stable mounting of the lamp Maximum body surface temperature: 59 C, maximum lens surface temperature 76 C (measured in laboratory conditions at 25 C). Weight: ~0.6 kg Use in ventilated areas. E-approved reversing light Approval: AR-E Power: 16W Operating Voltage: 10-30V DC Waterproof rate: IP 67 4pcs CREE Current draw: 1.34@12V,0.67A@24V Color Temperature: 6000K Material: Diecast aluminum housing Lens material: PC Mounting Bracket: Stainless Steel Lifetime ~ hours Part No Part No

11 11 SAFETY FLASH SPECIALTY LIGHTS SAFETY FLASH CASE with 6 pcs 16 bright red longlife s 9 selectable flash mode settings Up to 100 h run-time depending on flash mode Strong magnetic base for fast mounting Waterproof and floatable Alert traffic behind during breakdowns Highlights machinery during service or danger areas. 16 bright red longlife s 9 selectable flash mode settings Up to 70 hours run-time depending on flash mode Strong magnetic base for fast mounting Waterproof and floatable Warns traffic behind during breakdowns Highlights machinery during service or danger areas. Part No. TD90000 CR123A battery, TD90001 rechargeable, 12/24V and 240V charger Part No. TD90002 kalix xenon DRL for Scania 4/R-series Kalix has a perfect fit in the Scania 4/R-series visor. 35W HID/ Xenon bulb and built in 24V ballast. The 5 position lights give a modern look to any truck. Mounting hardware included for universal and model specific mounts. 240x132x118mm. DRL (Daytime Running Lights) that fits in the fog light housing on Scania 4/R-series. Replaces the original fog lamp insert. The DRL housing fits Scania R-series. The dimmable function makes the ECE approved DRL to become a parking light when the low beam is turned on. Wiring kit included. Comes as a pair. Part No Part No (insert) 4/R-serien, (housing) R-serien HID/Xenon conversion kits A complete kit for two lamps. The 55W 4300K conversion kit is available for many sockets and will fit most cars and trucks. No cutting of cables. Available as 12 or 24 volts systems. 12V Part No H1-12 H1, H11-12 H H3-12 H3, H4-12 H4, H7-12 H7, HB3-12 HB3, HB4-12 HB4 24V Part No H1-24 H1, H3-24 H3, H4-24 H4, H7-24 H7, H11-24 H11

12 12 WARNING LIGHT 3x1W 12-24V BLUE Warning light 4x1W 12-24V BLUE Warning lights with 11 different light patterns, synchronize capable, multi volt 12-24, IP65. 36x100x40mm. ECE/R65 approved. Part No B Warning lights with 18 different light patterns, synchronize capable, multi volt 12-24, IP65. 36x120x40mm. ECE/R65 approved. Part No B Warning light 3x1W 12-24V AMBER Warning light 4x1W 12-24V Amber Warning lights with 11 different light patterns, synchronize capable, multi volt 12-24, IP65. 36x100x40mm. ECE/R65 approved. Warning lights with 18 different light patterns, synchronize capable, multi volt 12-24, IP65. 36x120x40mm. ECE/R65 approved. Part No A Part No A WARNING LIGHT 2x3 led 12-24V WARNING LIGHT 2x4 led 12-24V Warning lights with 11 different light patterns, synchronize capable, multi volt 12-24, IP65. 36x100x70mm. ECE/R65 approved. Part No B-D blue, A-D amber Warning lights with 18 different light patterns, synchronize capable, multi volt 12-24, IP65. 36x120x70mm. ECE/R65 approved. Part No B-D blue, A-D amber

13 13 WARNING LIGHTS WARNING LIGHT BAR 12-24V An ECE/R65 approved light bar with s that will make you stand out in traffic. The 15 different light patterns in combination with the design insure maximum visibility. A clean looking and easy to install light bar that comes complete with control panel and mounting hardware. Available in Amber or Blue and in sizes from 480mm to 1920mm. AMBER BLUE Part No mm, mm, mm, mm, mm Part No B 900 mm, B 1200 mm, B 1440 mm, B 1920 mm Warning light 3x3W 12-24V Warning light 4x3W 12-24V Our High power warning lights with 12 different light patterns, synchronize capable, multi volt 12-24, IP68. Available in Amber, Blue, Red and White. 29x98x41mm. ECE/R65 approved. Our High power warning lights with 19 different light patterns, synchronize capable, multi volt 12-24, IP68. Available in Amber, Blue, Red and White. 29x118x41mm. ECE/R65 approved. Part No HP-A, HP-B, HP-R, HP-W (Only ECE R10) Part No HP-A, HP-B, HP-R, HP-W (Only ECE R10)

14 14 TAIL LAMPS TAIL Part No Tail/Brake Part No Indicator Part No Fog Part No Warning light Part No Reversing Part No TAIL Part No Tail/Brake/indicator Part No Tail/Brake Part No Indicator Part No FOG Part No HOUSING Singel housing Doubble housing P Rubber gasket Tail lamps 24V Our series of rectangular tail lamps for recessed mounting either in rubber housing or with a small rubber gasket. They will fit in older Hella rubber housings instead of the bulb holder. ECE approved. Polycarbonate plastic with UV protection. Supplied with 2,5m of cable. 24V. 130x110x45mm

15 15 TAIL LIGHTS TAIL LAMP RED EYE TAIL LIGHT 4-FUNcTIONS A modern round tail light 10-30V IP67. Available as Tail/Brake/ Indicator or Fog/Reverse. Recessed mounting with chrome surround that covers the mounting screws. Supplied with 2,5 m cable. 122x122x43mm Part No fog/reverse, tail/break/indicator The 70 s and the 4 functions is what makes this a really good tail lamp. Tail/ Brake/ Indicator/ Reverse 397x128x- 46mm. Hole pattern C/C 152mm. Part No. CLC-888L Viking Rubber arms Compatible with all 60mm inserts. Three versions: short, long, cone. Part No long, short, cone VIKING Side marker, rear and front position lamps A -series from Strands that fits the common 60mm rubber arms. We also supply new rubber arm for the Viking series. Viking is a fully homologated -insert in all its versions. A superior product manufactured in Europe that make sure your e visible and safe on the road. Supplied with 5m of cable. Side marker and rear and front position lamps Part No side marker amber 5, sidemarker amber 5, position lamp red 6, position lamp white 6, side marker amber 6 clear lens, position lamp red 6 clear lins A classic design but from us it comes with 5 s and 5m of cable. 110x50x25mm. Hole pattern C/C 90mm. Part No amber, red, white

16 DISTRIBUTORS ALL OVER EUROPE NORWAY BELGIUM RASKASSARJA HEAVY DUTY SPAREPARTS FINLAND SWEDEN OTHER CUSTOMERS Compaction Denmark, Refako Denmark, Main part Angola, Sternhammar Sweden Släpis Sweden, Mekonomen Sweden, Meca Sweden, Tools Sweden, ExTe Sweden, Huzells Sweden, Ena Czech Republic FC Promotion France, Custom Truck Concept France, Kuda UK, Winkler Germany, Ena Truck Poland, Europart Denmark, Germany, Sweden STRANDS FORDONSKOMPONENTER AB Hagalundsvägen, Fritsla, Sweden. +46 (0)