Guide cylinder, Series GPC-BV Ø mm double-acting Plain bearing cushioning: elastic with magnetic piston
|
|
- June Andrews
- 7 years ago
- Views:
Transcription
1 Bosch Rexroth AG Pneumatics Ambient temperature min./max. -10 C / +70 C Medium temperature min./max. -10 C / +70 C Medium Compressed air Max. particle size 50 µm Oil content of compressed air 0 mg/m³ - 5 mg/m³ Pressure for determining piston forces 6,3 bar Materials: Housing Seal Front plate Guide rod Bearing Piston rod Aluminum, anodized Polyurethane Steel galvanized Stainless steel Sintered bronze Stainless steel a11 Technical Remarks The pressure dew point must be at least 15 C under ambient and medium temperature and may not exceed 3 C. The oil content of air pressure must remain constant during the life cycle. Use only the approved oils from Bosch Rexroth, see chapter Technical information. Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. Piston Ø [mm] Port M5 M5 M5 M5 G 1/8 Working pressure min./max. [bar] 2 / 8 2 / 8 2 / 8 2 / / 8 Retracting piston force [N] Extending piston force [N] Speed max. [m/s] Impact energy [J] Piston Ø [mm] Port G 1/8 G 1/8 G 1/4 G 1/4 G 1/4 Working pressure min./max. [bar] 1.3 / 8 1 / 8 1 / 8 1 / 8 1 / 8 Retracting piston force [N] Extending piston force [N] Speed max. [m/s] Impact energy [J] Piston Ø [mm] 100 Port G 3/8 Working pressure min./max. [bar] 1 / 8 Retracting piston force [N] 4639 Extending piston force [N] 4948 Speed max. [m/s] 0.4 Impact energy [J] 1
2 2 Bosch Rexroth AG Pneumatics Piston Ø Piston rod Ø Stroke 10 R R R R R R R R Piston Ø Piston rod Ø Stroke R R R R R R R Piston Ø Piston rod Ø Stroke R R R R R R R
3 Bosch Rexroth AG Pneumatics 3 Weight [kg] Piston Ø Stroke Piston Ø Stroke Piston Ø 100 Stroke
4 4 Bosch Rexroth AG Pneumatics Dimensions 1) View for sensor groove Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants Outer dimensions Piston Ø D2 D4 E1 E2 K L1 L2 L3 L4 L5 L6 L7 L M5 20 ±0, M5 23 ±0, M5 28 ±0, M5 30 ±0, G 1/ G 1/ G 1/ G 1/ G 1/ G 1/ G 3/ Piston Ø L18 L25 L26 L27 L28 L29 L30 L31 LJ1 LJ2 LM1 LM2 LM
5 Bosch Rexroth AG Pneumatics 5 Piston Ø L18 L25 L26 L27 L28 L29 L30 L31 LJ1 LJ2 LM1 LM2 LM Piston Ø LM4 PL1 PL2 PL3 PL4 T TT ZA DX N N N N N N N N N To determine the cylinder length (ZA) for intermediate strokes (i.e. stroke 10 with dia. 40), the next available standard stroke size must be used Mounting holes position top/bottom, side, stroke: 10 Piston Ø S=10 S=10 S=10 S=10 S=10 S=10 S= ) Two holes C-C 10 mm. Mounting holes position top/bottom, side, stroke: 20 Piston Ø S=20 S=20 S=20 S=20 S=20 L21 S=20 S=20 S=
6 6 Bosch Rexroth AG Pneumatics Mounting holes position top/bottom, side, stroke: 25 Piston Ø S=25 S=25 S=25 S=25 S=25 S=25 S=25 S= Mounting holes position top/bottom, side, stroke: 30 Piston Ø S=30 S=30 S=30 S=30 S=30 L21 S=30 S=30 S= Mounting holes position top/bottom, side, stroke: 40 Piston Ø L Mounting holes position top/bottom, side, stroke: 50 Piston Ø
7 Bosch Rexroth AG Pneumatics 7 Piston Ø Mounting holes position top/bottom, side, stroke: 75 Piston Ø L16 L Mounting holes position top/bottom, side, stroke: 100 Piston Ø L16 L23 L Mounting holes position top/bottom, side, stroke: 125 Piston Ø L16 L23 L32 L
8 8 Bosch Rexroth AG Pneumatics Piston Ø L16 L23 L32 L Mounting holes position top/bottom, side, stroke: 150 Piston Ø L16 L23 L32 L Mounting holes position top/bottom, side, stroke: 160 Piston Ø L16 L23 L32 L Mounting holes position top/bottom, side, stroke: 200 Piston Ø L16 L21 L23 L32 L Mounting holes position, size x depth [mm] Piston Ø A B C Ø D 1) DD E F 1) G 1) J 1) 10 M4x6 4 H7x4 M4x M4x8 M4 12 M5x8 4 H7x4 M5x M5x8 M4 16 M5x8 4 H7x4 M5x M5x8 M H9 20 M6x10 4 H7x4 M6x M5x10 M H9 25 M6x10 4 H7x4 M6x M6x12 M H8 1) Through hole
9 Bosch Rexroth AG Pneumatics 9 Piston Ø A B C Ø D 1) DD E F 1) G 1) J 1) 32 M8x14 4 H7x4 M8x M6x12 M H8 40 M8x14 4 H7x4 M8x M8x16 M H8 50 M10x20 5 H7x5 M10x M8x16 M H8 63 M10x20 5 H7x5 M10x M10x20 M H8 80 M12x24 6 H7x6 M12x M12x25 M H7 100 M12x24 6 H7x6 M12x M12x25 M H7 1) Through hole Guide rod dimensions, plain bearing Piston Ø S D1 S S D1 S S D1 S S D1 S S D1 S Piston Ø S>100 D1 S>100 DX Play GPC_001
10 10 Bosch Rexroth AG Pneumatics Piston Ø A 1) ) Piston rod deflection at a stroke of 50 mm and a load of 10 N (mm) Permissible static side force F [N] Ø 10, 12: L = 25 mm; Ø : L = 50 mm gpc_005 Piston Ø S=10 S=20 S=25 S= Permissible static moment M [Nm] gpc_004 Piston Ø S=10 S=20 S=25 S=
11 Bosch Rexroth AG Pneumatics 11 Piston Ø S=10 S=20 S=25 S= Permissible static moment M [Nm] GPC_006 Piston Ø S 5 30 S>30 S S S> ,5 1,
12 12 Bosch Rexroth AG Pneumatics GPC combinations gpc_007 Minimum strokes for cylinder 1 when using 2 assembled guide cylinders Piston Ø S Minimum strokes for cylinder 2 when using 2 assembled guide cylinders Stroke Ø 2 A B M4x M4x M4x M4x M4x M4x M4x M4x M5x M5x M5x M5x M5x M5x M5x M5x M5x M5x M5x M5x18 A = min.stroke: assembly A B = min.stroke: assembly B 3 = screw
13 Bosch Rexroth AG Pneumatics 13 Stroke Ø 2 A B M5x M5x M5x M5x M5x M5x M5x M5x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M6x M8x M8x M8x M8x M8x M8x M8x M8x M8x M8x M8x M8x M8x M8x M10x M10x M10x M10x M10x M10x M10x M10x M10x M10x M10x35 A = min.stroke: assembly A B = min.stroke: assembly B 3 = screw
14 14 Bosch Rexroth AG Pneumatics Stroke Ø 2 A B M10x M10x M10x M12x M12x M12x M12x M12x M12x M12x40 A = min.stroke: assembly A B = min.stroke: assembly B 3 = screw
Mini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide
Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure
More informationRotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
More informationValve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
More informationPiston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
More informationPiston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure
ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
More informationMicro oil-mist lubricator, Series NL2-LBM G 1/4
Version Micro oil-mist lubricator, an be assembled into blocks Mounting orientation vertical Working pressure min./max. 0.5 bar / 6 bar Medium ompressed air Neutral gases Medium temperature min./max. -0
More informationPiston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationControl- and feedback head for integrated mounting on Robolux valves Type 2036
Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated
More informationCylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationPos. Part No. Designation Quantity
Part No.: R902028609 Designation: AA2FM160/61W-VSD510 R902030569 1 R902030998 ROTARY GROUP L 3 R902038553 HOUSING 4 R909409201 PORT PLATE 5 R909084174 CYLINDER PIN 6 R909154656 O-RING D 7 R909083129 SOCKET-HEAD
More informationFDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
More information4/2-Way Pneumatic Solenoid Valve
4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationDryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
More informationPneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US
Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationExtruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
More informationRexroth Linear Motion Technology
2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Ball Rail Systems R310A 2202 (2007.05) Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Standard
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationOil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data
amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at
More informationLinear Systems. Main Catalog
Linear Systems Main Catalog MOVITEC Linear Systems The Italian company Impex Tecniche Lineari designs and manufactures a wide range of products under the brand name MOVITEC: Electromechanical and pneumatic
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationVacuum Gate Valve DN 100 and DN 150
Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationDirect Operated Regulator for 6.0 MPa (Relieving Type) How to Order. Body size 30 40
Direct Operated Regulator for (Relieving Type) Series Service life: 0 million cycles Using NSF-H-certified grease on the guide ring (sliding) part. Improved durability under a high environment with a polyurethane
More informationRM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationRODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446
RODESS AND CYINDERS WITH CARRIER RACKET-TYPE ST SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length of
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More informationNormcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More informationKA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
More informationSteering unit. Table of contents. Features RE 11872/05.06. Type LAGL. Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min
Steering unit RE 11872/05.06 /10 Type LAGL Frame sizes 500 to 1000 Component series 1X Maximum flow 80 l/min H7375 Table of contents Contents Page Features 1 Ordering code 2 Function, section 3 Device
More informationIMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More informationPressure calibration equipment
Pressure calibration equipment Pressure calibration evolution 1925 Westertoren in Amsterdam 30 meter mercury column (±40 bar) 1950 comparison test pump 21 st century Stiko gas driven differential deadweight
More informationM A N U A L 13-10-05
Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationPneumatic. PXC Limit Switches. Authorised Distributor TTS Valve Technologies Sdn Bhd
Pneumatic PXC Limit Switches Limit Switches Series PXC High durability Very good repeat accuracy Design for process duty cycle Push-in or threaded connection Versatile and easily maintained Wide range
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationCustom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
More informationSensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
More informationElectrical connection technologies Electrical connectors Electrical connectors with cable, series. Brochure
Electrical connection technologies Electrical connectors Electrical connectors with cable, series CN Brochure Electrical connection technologies Electrical connectors Electrical connectors with cable,
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive
More informationDPE Parallel Gripper- Electric Gripper Series
1.8 DPE Parallel Gripper- Electric Gripper Series Electrically Actuated 24 VDC, 4-wire input: power, ground, open & closed signals. 100% duty cycle for high throughput. Light Switch Simplicity Plug and
More informationRotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
More informationHydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08
Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston
More informationDiaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators
Favorable Variety Whether rotary or linear with pneumatic, electric, and hydraulic valve actuators from ARCA Regler GmbH, you always have the right solution at hand. ARCA s comprehensive product portfolio
More informationsize 3 15 4200 size 4 19 6600
BE/BE ISO 99/ Valves - Compliance with ISO 99/ international standards - Full range: - - - size - Two different internal commutation system: mixed and spool, appreciated for decades thanks to their maximum
More informationTubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
More informationG1/4 Q8. Standard with biased position
Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,
More informationAPPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.
APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so
More informationElectro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
More informationCylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationTyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
More informationKompressoren. Adsorption Dryer AD
Kompressoren Adsorption Dryer AD Adsorption Drying: why? Modern industries require compressed air that is increasingly filtered with low dew point and condensate. Today, the equipment is more sophisticated
More informationAtling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests
Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development
More information3/2- and 2/2-way cartridge valve type BVE
3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type
More informationProfile rail guides LLR
Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationMachine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
More informationStainless Steel Cylinders DIN ISO 6431 and VDMA 24 562
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYPE MAGNETIC STANDARD AMX STAINLESS STEEL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
More informationPlunger Cylinder. 1 Description. 2 Technical data
Plunger Cylinder Piston rods ø 50 290 mm, construct to EN 81-2 / EN 81-50 Intended for personnel and freight elevators Series BZG For side-ram or central arrangement Seals with low frictions and war Piston
More informationNorbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
More informationSingle sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
More informationTool changer. Rugged and durable. For universal use. Payload up to 800 kg
Tool changer TK-Series Rugged and durable For universal use Payload up to 800 kg 02 our own Development Dept. our own Manufacturing Division. Unbeatable in reliability. A product portfolio setting standards
More informationMINEX -S. Magnetic coupling. You will find continuously updated data in our online catalogue at www.ktr.com
MINEX - 171 Table of contents NEW MINEX - 171 Coupling description 173 Technical description 174 s A 22/4 to B 60/8 with containment shroud made of stainless steel 175 s A 75/10 to F 250/38 with containment
More informationFlow divider (flow distributor), type TQ
Flow divider (flow distributor), type TQ Pressure p max = 0 bar Flow Q CN max = 00 lpm Share ratio = :. General Task Flow dividers type TQ are self-regulating valves, which largely irrespective of the
More informationTechnical Information
Technical Information This section of the catalogue provides technical information that will help specify, install and maintain Surelock McGill devices and components. The topics are listed below: Blast
More informationSOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
More informationAdsorption air dryers ADS 1 215
Adsorption air dryers ADS 25 INDUSTRY CUSTOMER SERVICE COMPRESSED AIR AIR INTAKE 20 C 70% UR 760 mm Hg 2 grh 2 O/m 3 AIR PRESSURE 0 bar COOLING SYSTEM 30 C 00% UR 0 bar 2,8 grh 2 O/m 3 A compressor that
More informationUnited Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson, Dover, Pacific Scientific, Portescap,
More informationTypical Aluminum GFM Mass Flow Meter
MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More information2.12. page 223 2.12. Products for Explosion hazardous Environment
2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available
More informationHydraulic multidisc Brake H420
S320gb - rev 02/09 S E R V I C E Hydraulic multidisc Brake H420 A N U A L WARNER ELECTRIC EUROPE Rue Champfleur, B.P. 20095, F- 49182 St Barthélemy d Anjou Cedex Tél. +33 (0)2 41 21 24 24, Fax + 33 (0)2
More informationMagnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
More informationPneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
More informationShut-off & Lockout Valves 1/4" to 1-1/2" port size
Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout
More informationSlides and Drawers. The right collection
Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationDisplacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
More informationValves. Sub-Base Mounted Valves to ISO 5599/2
Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationPVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
More informationTerminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
More information3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
More informationControl block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
More informationVP23, 3-way proportional pressure control valves Seat valve with μp-driven pressure control
VP, -way proportional pressure control valves > > Port size: G/... G/ > > All-digital control electronics > > Variable pressure control > > Optional actuation via fieldbus (separate datasheet on request)
More informationtype V46, solenoid or pneumatic operated
SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More information