O-Ring Boss Fittings. Fitting and Port. Assembled

Transcription

1 Fittings Fitting and Port Assembled Adjustable ORB 360º Positioning Pressure Connections uses a 90 durometer, Buna-N (Nitrile) O-ring, with other compounds available upon request. The threads of the SAE straight thread (ORB) and the straight thread 37 JIC Flare are the same threads. The difference is the way each thread seals. While the JIC seals on a metal-to-metal flare, the ORB seals on an O-ring. This type of seal offers the best leak free connection, even if small nicks and dings are found on the sealing surfaces of the ports. This O-ring connection is highly recommended for medium and high pressure systems, and is excellent in vibration and/or temperature cycling environments. Since the seal takes place at the O-ring and not the threads, the fitting can be used multiple times. Simply replace the O-ring and it is ready for service again. Pressure Connections uses specially designed mandrels, or cones, to ensure that the threads never damage the o-ring during installation. The elbows and tees have an adjustable ORB thread that allows 360 positioning when tightening for an easy connection. Fittings are dimensionally standardized by SAE under J54, but because of differing manufacturing methods, and interpretation of conformance, actual performance will vary between brands. This is where our Quality Assurance Department sets us apart from other manufacturers. Pressure Connections takes great pride in each fitting we sell. Standard material for our Fittings is steel with a RoHs compliant 96-hour salt spray finish that exceeds the SAE 7-hour salt spray requirement. For details about our Quality Assurance Program please reference the inside front cover of this catalog. Page 6

2 6400 (0700) 6400L (0770) 6400R Fittings Pg. 8 Straight Thread Connector -MJ -MB 6408 (09009A) Pg. 9 Straight Pg. 0 Restrictor Pg. Pg. Pg. 3 Pg. 4 Thread Connector Long -MJ -MB Str. Thread Connector -MJ -MB Male ORB x Male Pipe -MB -MP Swivel Nut Adaptor -MB -FJX Female ORB x Male Pipe -FB -MP Male ORB x Male Pipe -MB -MP 6408-V (09009A) 6408-SOLID 6409 (09009B) 6409-V (09009B) Pg. 5 Male ORB Union -MB -MB (Adjustable) 645 Pg. 6 Pg. 7 Pg. 9 Solid Pg. 8 Pg. 9 Pg. 30 Pg. 3 Pg. 3 Hex Head ORB Plug Hex Head ORB Plug Hex Head ORB Plug Hex Socket ORB Plug Hex Socket ORB Plug ORB Reducer-Expander Female ORB x Female Pipe Female ORB Union -MB -MB (Viton ) -MB -MB -MB (Viton ) -MB -FB -FB -FP -FB -FB 680 (0700) 680L (0750) 680LL (0760) 680LLL (070) 680R 680 (07030) 6803 (07049) 6804 (07048) Pg. 43 Straight Thread Elbow -MJ -MB 6805 Pg. 45 Str Thr Elbow Long -MJ -MB 6805LL Pg. 46 S T Elbow Double Long -MJ -MB 6806 Pg. 46 S T Elbow Triple Long -MJ -MB 6807 Restrictor Straight Thread Elbow -MJ -MB 6809 Pg. 44 Pg. 47 Straight Thread Elbow -MJ -MB Pg. 48 ORB Branch Tee -MJ -MJ 3-MB 6900 (4057) Pg. 49 ORB Run Tee -MJ -MB 3-MJ 6900R 3 Pg. 50 ORB Female Elbow -MB -FP 690 (4057) Pg. 55 MB x NPSM Elbow -MB -FPX Pg. 50 ORB F E Double Long -MB -FP 690R Pg. 5 Pg. 5 Pg. 5 ORB Male Elbow ORB Union Elbow Swivel Nut Elbow -MB -MP -MB -MB -MB -FJX 690 (40357) Pg. 56 Restrictor Pg. 57 MB x NPSM Elbow -MB -FPX MB x NPSM Elbow -MB -FPX Torque Values Pg. 5 Straight Thread Elbow -MB -FB Pg. 53 MB x NPSM Swivel -MB -FPX The and the 37 JIC Flare use the same threads. The difference is the way each thread seals. While the JIC seals on a metal-to-metal flare, the ORB seals on an O-Ring. We use a 90 durometer, Buna-N (Nitirle) O-Ring with Viton as an option. An O-ring seal offers the best leak free connection. Viton is a trademark of DuPont Pg. 54 Restrictor MB x NPSM Swivel -MB -FPX Available in 36 Stainless Steel Size lb-ft min./max. -0 = = = = 7-06 = 5-08 = = = = = 3-0 = = = 8 90 Assembly. Inspect the components and make sure the port, O-ring, sealing surfaces, and threads are clean, and free of damage.. Install an O-ring if needed. Take special care not to cut it on the threads. We install our O-rings with special mandrels, or cones. 3. Lubricate the threads and O-ring with 0W hydraulic oil. 4. For an adjustable ORB, completely back off the locknut / washer. 5. Hand tighten the fitting until it contacts the port spotface. 6. Proceed to tighten the proper specified torque value. This completes an connection. Please Note 3D Drawings available on request. Page 7

3 Fittings information is on pages 6 7, Straight Thread Connector Male JIC x Male ORB Available in 36 Stainless Steel SAE 0700 Ref. Aeroquip 070 Ref. Parker F50X / 0503 Ref. Weatherhead C Tube C L Operating -MJ -MB O.D. Male JIC Male ORB Hex Length Pressure /8 5/6-4 5/6-4 7/6.06 7, /6 3/8-4 3/8-4 /.0 7, /4 7/6-0 5/6-4 9/6.7 7, /4 7/6-0 3/8-4 9/6.7 7, /4 7/6-0 7/6-0 9/6.3 7, /4 7/6-0 / - 0 5/8.3 6, /4 7/6-0 9/6-8 /6.9 6, /4 7/6-0 3/4-6 7/8.37 6, /4 7/6-0 7/8-4 ".49 5, /4 7/6-0 /6 - /4.66 5, /6 / - 0 7/6-0 9/6.3 6, /6 / - 0 / - 0 5/8.3 6, /6 / - 0 9/6-8 /6.7 6, /6 / - 0 3/4-6 7/8.37 6, /6 / - 0 7/8-4 ".49 5, /8 9/6-8 7/6-0 5/8.7 6, /8 9/6-8 / - 0 5/8.7 6, /8 9/6-8 9/6-8 /6.30 6, /8 9/6-8 3/4-6 7/8.38 6, /8 9/6-8 7/8-4 ".50 5, /8 9/6-8 /6 - /4.66 5, /8 9/6-8 5/6 - /.68 4, / 3/4-6 7/6-0 3/6.49 6, / 3/4-6 / - 0 3/6.49 6, / 3/4-6 9/6-8 3/6.44 6, / 3/4-6 3/4-6 7/8.48 6, / 3/4-6 7/8-4 ".60 5, / 3/4-6 /6 - /4.76 5, / 3/4-6 5/6 - /.79 4, /8 7/8-4 9/6-8 5/6.7 5, /8 7/8-4 3/4-6 5/6.64 5, /8 7/8-4 7/8-4 ".70 5, /8 7/8-4 /6 - /4.86 5, /8 7/8-4 3/6-3/8.86 5, /8 7/8-4 5/6 - /.89 4, /8 7/8-4 5/8-7/8.08 4, /4 /6-9/6-8 /4.86 5, /4 /6-3/4-6 /8.94 5, /4 /6-7/8-4 /8.88 5, /4 /6 - /6 - /4.97 5, /4 /6-3/6-3/8.96 5, /4 /6-5/6 - /.99 4, /4 /6-5/8-7/8.08 4, /8 3/6 - /6 - /4.99 5, /8 3/6-3/6-3/8.99 5, /8 3/6-5/6 - /.0 4,500 Continued on next page. 4: Safety Factor Page 8

4 information is on pages 6 7, 4 Fittings SAE 0700 Ref. Aeroquip 070 Ref. Parker F50X / 0503 Ref. Weatherhead C535 Available in 36 Stainless Steel 6400 Straight Thread Connector Male JIC x Male ORB Continued from previous page Tube C L Operating -MJ -MB O.D. Male JIC Male ORB Hex Length Pressure " 5/6-3/4-6 3/8.0 4, " 5/6-7/8-4 3/8.07 4, " 5/6 - /6-3/8.04 4, " 5/6-3/6-3/8.04 4, " 5/6-5/6 - /.04 4, " 5/6-5/8-7/8. 3, " 5/6-7/8 - /8.0 4, /4 5/8-7/8-4 /6.0 4, /4 5/8 - /6 - /6.30 4, /4 5/8-5/6 - /6.33 4, /4 5/8-5/8-7/8.7 4, /4 5/8-7/8 - /8.4 3, / 7/8-5/6 - ".53 3, / 7/8-5/ , / 7/8-7/8 - /8.37 3, / 7/8 - / - 3/4.53, " / - 7/8-5/8.74, " / - / - 3/4.78,000 4: Safety Factor SAE 0770 Ref. Aeroquip 073 Ref. Parker FF50X / 5E03 Ref. Weatherhead C L Straight Thread Connector Long Male JIC x Male ORB 6400L-- Tube C I L Operating -MJ -MB O.D. Male JIC Male ORB Hex Length Length Pressure 6400L /4 7/6-0 7/6-0 9/ , L /6 / - 0 / - 0 5/ , L /8 9/6-8 9/6-8 / , L /8 9/6-8 3/4-6 7/ , L / 3/4-6 3/4-6 7/ , L-0-0 5/8 7/8-4 7/8-4 " , L-- 3/4 /6 - /6 - / , L-4-4 7/8 3/6-3/6-3/ , L-6-6 " 5/6-5/6 - / , L-0-0 /4 5/8-5/8-7/ , L-4-4 " 7/8-7/8 - / ,000 4: Safety Factor Page 9

5 Fittings information is on pages 6 7, R Restrictor Straight Thread Connector Male JIC x Male ORB SAE J R-- - Tube C L Operating -MJ -MB -Orifice O.D. Male JIC Male ORB Orifice Hex Length Pressure 6400R /4 7/6-0 7/6-0 Blank 9/6.3 7, R /4 7/6-0 7/6-0 /3 9/6.3 7, R /4 7/6-0 7/6-0 #58 9/6.3 7, R /4 7/6-0 7/6-0 /6 9/6.3 7, R /4 7/6-0 9/6-8 /3 /6.9 6, R /4 7/6-0 9/6-8 #58 /6.9 6, R /4 7/6-0 9/6-8 #56 /6.9 6, R /4 7/6-0 9/6-8 /6 /6.9 6, R /8 9/6-8 9/6-8 Blank /6.30 6, R /8 9/6-8 9/6-8 /3 /6.30 6, R /8 9/6-8 9/6-8.5mm /6.30 6, R /8 9/6-8 9/6-8 #55 /6.30 6, R /8 9/6-8 9/6-8 /6 /6.30 6, R /8 9/6-8 3/4-6 Blank 7/8.38 6, R /8 9/6-8 3/4-6 /3 7/8.38 6, R /8 9/6-8 3/4-6 #65 7/8.38 6, R /8 9/6-8 3/4-6 /6 7/8.38 6, R /8 9/6-8 3/4-6 #45 7/8.38 6, R /8 9/6-8 3/4-6 /8 7/8.38 6, R / 3/4-6 3/4-6 Blank 7/8.48 6, R / 3/4-6 3/4-6 /3 7/8.48 6, R / 3/4-6 3/4-6 /6 7/8.48 6,000 4: Safety Factor Other RESTRICTOR Fittings 404R (pg. 9) 50R (pg. 33) 406R (pg. 57) 6400R (pg. 0) 680R (pg. 44) 6900R (pg. 54) 690R (pg. 56) Page 0

6 information is on pages 6 7, 4 SAE J54 Ref. Parker F50F Ref. Weatherhead C349 Fittings 640 Male ORB x Male Pipe Available in 36 Stainless Steel C L Operating -MB -MP Male ORB Male NPTF Hex Length Pressure /6-0 /8-7 9/6.04 6, /6-0 /4-8 9/6.4 6, / - 0 /8-7 5/8.0 6, / - 0 /4-8 5/8.0 6, /6-8 /8-7 /6.04 6, /6-8 /4-8 /6.8 6, /6-8 3/8-8 3/4. 6, /6-8 / - 4 7/8.53 6, /4-6 /4-8 7/8.38 6, /4-6 3/8-8 7/8.36 6, /4-6 / - 4 7/8.56 6, /4-6 3/4-4 /8.78 5, /8-4 3/8-8 ".46 6, /8-4 / - 4 ".56 6, /8-4 3/4-4 /8.64 5, /6-3/8-8 /8.55 5, /6 - / - 4 /4.84 5, /6-3/4-4 /4.73 5, /6 - - / 3/8.0 4, /6-3/4-4 /4.73 4, /6-3/4-4 /.95 4, /6 - - / /.05 4, /8 - /4 - / 7/8.8 3, /8 - - /.3.0 3, /8 - / - / /8.8, / - - / 3/4.6,000 4: Safety Factor Please Note 3D Drawings available on request. Page

7 Fittings information is on pages 6 7, Swivel Nut Adapter Male ORB x Female JIC Swivel SAE J54 Ref. Aeroquip 66 Ref. Parker F65OX Ref. Weatherhehad C56 Available in 36 Stainless Steel Tube Female C C L Operating -MB -FJX O.D. Male ORB JIC Swivel Body Hex Nut Hex Length Pressure /4 7/6-0 7/6-0 9/6 9/6.3 7, /8 7/6-0 9/6-8 9/6 /6.4 6, /4 9/6-8 7/6-0 /6 9/6.37 6, /8 9/6-8 9/6-8 /6 /6.50 6, / 9/6-8 3/4-6 7/8 7/8.7 5, /8 3/4-6 9/6-8 7/8 /6.57 5, / 3/4-6 3/4-6 7/8 7/8.66 5, / 7/8-4 3/4-6 7/8.76 5, /8 7/8-4 7/8-4 " ".98 5, /4 /6 - /6 - /4 /4.07 5, /4 5/6 - /6 - / /4.9 3, " 5/6-5/6 - / /. 3, /4 5/8-5/8-7/8 ".6 3, / 7/8-7/8 - /8 /4.77 3,000 4: Safety Factor Please Note Torque Values are on page 7. Page

8 information is on pages 6 7, 4 SAE J54 Ref. Aeroquip 46 Ref. Parker FHG5 Ref. Weatherhead C339 Fittings 6404 Female ORB x Male Pipe C L Operating -FB -MP Female ORB Male NPTF Hex Length Pressure /6-0 /8-7 /6.5 6, /6-0 /4-8 /6.34 6, / - 0 /8-7 3/4.4 6, /6-8 /4-8 3/4.33 6, /6-8 3/8-8 7/8.38 6, /6-8 / - 4 7/8.44 6, /4-6 3/8-8 ".50 5, /4-6 / - 4 ".64 5, /8-4 3/8-8 /4.63 4, /8-4 / - 4 /4.8 4, /6-3/4-4 3/8.97 4, /6 - - / 7/8.0 4, /6-3/4-4 7/8.99 3, /6 - - / 7/8.6 3, /6 - /4 - / /6.3 3, /8 - /4 - / ".5 3, /8 - / - / /4.8,000 4: Safety Factor Quality Assurance Tips Pressure Connections provides up to date Gauge Certifications as as part of our equipment and Gauge Calibration Program. We out-source our gauge calibrations to ensure inspection consistency. Page 3

9 Fittings information is on pages 6 7, Male ORB x Female Pipe (Optional Step Shown) Available in 36 Stainless Steel SAE J54 Ref. Aeroquip 6 Ref. Parker F5OG / 050 Ref. Weatherhead C C L Operating -MB -FP Male ORB Female NPTF Hex Length Pressure /6-0 /8-7 9/6.00 6, /6-0 /4-8 3/4.3 6, /6-0 3/8-8 7/8.8 6, / - 0 /8-7 5/ , / - 0 /4-8 3/4. 6, /6-8 /8-7 /6.00 6, /6-8 /4-8 3/4. 6, /6-8 3/8-8 7/8.8 6, /6-8 / - 4 /8.56 5, /4-6 /4-8 7/8. 6, /4-6 3/8-8 7/8.8 6, /4-6 / - 4 /8.59 5, /4-6 3/4-4 3/8.7 4, /8-4 /4-8 " 0.8 5, /8-4 3/8-8 ".3 5, /8-4 / - 4 /8.6 5, /8-4 3/4-4 3/8.7 4, /6 - /4-8 /4.00 5, /6-3/8-8 /4.50 5, /6 - / - 4 /4.64 5, /6-3/4-4 3/8.75 4, /6 - - / 5/8.05 3, /6 - / - 4 3/8.5 5, /6-3/4-4 3/8.69 4, /6 - /4-8 /.0 4, /6-3/8-8 /.3 4, /6 - / - 4 /.64 4, /6-3/4-4 /.64 4, /6 - - / 5/8.95 3, /6 - /4 - / ".5, /8-3/4-4 7/8.00 3, /8 - - / 7/8.00 3, /8 - /4 - / ".00, /8 - / - / 3/8.30, /8-3/4-4 /8.00 3, /8 - - / /8.00 3, /8 - /4 - / /8.96 3, /8 - / - / 3/8.6, / - /4 - / 3/4.00, / - / - / 3/4.00, / - - / 7/8.0,000 This part has an step (shoulder) shown above. 4: Safety Factor Page 4

10 information is on pages 6 7, 4 SAE J54 Ref. BRN 3474 Ref. Parker F5OHAO / 0505 Ref. Weatherhead C534 Fittings 6407 Male ORB Union MB x MB (Adjustable) Available in 36 Stainless Steel C C L Operating -MB -MB Male ORB Body Hex Nut Hex Length Pressure /6-0 9/6 9/6.46 6, /6-8 /6 /6.4 6, /4-6 7/8 7/8.56 6, /8-4 " ".04 5, /6 - /4 /4.34 5, /6 - / /.36 4, /8-7/8 7/8.3 4, /8 - /8 /8.4 3, / - 3/4 3/4.3,000 4: Safety Factor Quality Assurance Tips We maintain our prints and update our manufacturing processes to the Latest SAE Standards. Please Note Torque Values are on page 7. 3D Drawings available on request. Page 5

11 Fittings information is on pages 6 7, Hex Head ORB Plug Standard Buna-N O-Ring SAE 09009A Ref. Aeroquip Ref. Parker P5ON / 05CP Ref. Weatherhead 737 Available in 36 Stainless Steel C L Operating -MB Male ORB Hex Length Pressure Solid 5/6-4 7/ , Solid 3/8-4 / , /6-0 9/ , / - 0 5/ , /6-8 / , /4-6 7/ , /8-4 " , /6 - /4.09 6, /6-3/8.09 5, /6 - /. 5, /8-7/8.0 4, /8 - /8.7 3, / - 3/4.43,000 4: Safety Factor Quality Assurance Tips Pressure We Connections manufacture provides our parts up to date SAE Gauge specifications. Certifications This as part means of our you ll equipment get long and lasting, Gauge leak-free Calibration performance Program. from We out-source our gauge Pressure calibrations Connections to ensure fittings. inspection consistency. Please Note Torque Values are on page 7. Page 6

12 information is on pages 6 7, 4 SAE 09009A Fittings 6408-V Hex Head ORB Plug Viton O-Ring Available in 36 Stainless Steel V C L Operating -MB Male ORB Hex Length Pressure V Solid 5/6-4 7/ , V Solid 3/8-4 / , V 7/6-0 9/ , V / - 0 5/ , V 9/6-8 / , V 3/4-6 7/ , V 7/8-4 " , V /6 - /4.09 6, V 3/6-3/8.09 5, V 5/6 - /. 5, V 5/8-7/8.0 4, V 7/8 - /8.7 3, V / - 3/4.43,000 TM Viton is a Trademark of DuPont. SAE 09009A Ref. Aeroquip Ref. Parker P5ON / 05CP Ref. Weatherhead 737 4: Safety Factor 6408-SOLID Solid Hex Head ORB Plug Standard Buna-N O-Ring SOLID C L Operating -MB Male ORB Hex Length Pressure Solid 5/6-4 7/ , Solid 3/8-4 / , SOLID 7/6-0 9/ , SOLID / - 0 5/ , S0LID 9/6-8 / , SOLID 3/4-6 7/ , SOLID 7/8-4 " , SOLID /6 - /4.09 6, SOLID 3/6-3/8.09 5, SOLID 5/6 - /. 5, SOLID 5/8-7/8.0 4, SOLID 7/8 - /8.7 3, SOLID / - 3/4.43,000 4: Safety Factor Page 7

13 Fittings information is on pages 6 7, Hex Socket ORB Plug Standard Buna-N O-Ring Available in 36 Stainless Steel SAE 09009B Ref. BRN 6408-H Ref. TMP 6408-HHP Ref. Aeroquip FF38 Ref. Parker HP5ON / 05HP Ref. Weatherhead C L X Operating -MB Male ORB Hex Socket Length Round Pressure /6-4 / /6 6, /8-4 /8 0.4 / 6, /6-0 3/ /6 6, / - 0 3/ /8 6, /6-8 /4 0.5 /6 6, /4-6 5/ /8 6, /8-4 3/ " 6, /6-9/ /4 6, /6-9/ /8 5, /6-5/ / 5, /8-3/ /8 4, /8-3/ /8 3, / - 3/ /4,000 4: Safety Factor 6409: Pressure Connections Advantage Our Head Thickness is the maximum thickness under SAE Specifications. Our Cut-Off Nibs meets the SAE specified 0.06 maximum cut-off nib. Our plugs are able to satisfy the most demanding customers. No Chips: Our special undercut process eliminates chips in the hex socket. Please Note Torque Values are on page 7. Page 8

14 information is on pages 6 7, 4 SAE 09009B Fittings 6409-V Hex Socket ORB Plug Viton O-Ring Available in 36 Stainless Steel V C L X Operating -MB Male ORB Hex Socket Length Round Pressure V 5/6-4 / /6 6, V 3/8-4 /8 0.4 / 6, V 7/6-0 3/ /6 6, V / - 0 3/ /8 6, V 9/6-8 /4 0.5 /6 6, V 3/4-6 5/ /8 6, V 7/8-4 3/ " 6, V /6-9/ /4 6, V 3/6-9/ /8 5, V 5/6-5/ / 5, V 5/8-3/ /8 4, V 7/8-3/ /8 3, V / - 3/ /4,000 TM Viton is a Trademark of DuPont. 4: Safety Factor i Informational Tips Over-Torque Abuse can lead to fitting damage resulting in leakage. Use proper torque specifications regarding thread type and size. Please Note Torque Values are on page 7. Page 9

15 Fittings information is on pages 6 7, ORB Reducer-Expander (Optional Step Shown) SAE J54 Ref. Aeroquip FF00 Ref. Parker F5OG5 / 050 Ref. Weatherhead 7033 Available in 36 Stainless Steel C L Operating -MB -FB Male ORB Female ORB Hex Length Pressure /6-4 7/6-0 /6.03 7, /6-0 7/6-0 /6.08 7, Expander 7/6-0 9/6-8 3/6.9 6, / - 0 7/6-0 /6.07 6, /6-8 7/6-0 /6.05 6, /6-8 9/6-8 3/6.8 6, Expander 9/6-8 3/ , /4-6 7/6-0 7/ , /4-6 9/6-8 7/8.9 6, /4-6 3/ , Expander 3/4-6 7/8-4 /8.58 4, Expander 3/4-6 /6-3/8.70 4, /8-4 7/6-0 " 0.8 5, /8-4 9/6-8 " 0.8 5, /8-4 3/ , Expander 7/8-4 /6-3/8.7 4, /6-7/6-0 /4.07 5, /6-9/6-8 /4.07 5, /6-3/4-6 /4.09 5, /6-7/8-4 /4.56 5, /6 - /6-3/8.77 4, Expander /6-5/6-5/8.83 3, /6-9/6-8 3/8.08 4, /6-7/8-4 3/8.56 3, /6 - /6-3/8.83 3, /6-5/6-5/8.83 3, /6-3/4-6 /. 4, /6-7/8-4 /. 4, /6 - /6 - /.7 4, /6-3/6 - /.74 3, /6-5/6-5/8.78 3, Expander 5/6-5/8 - /8.3 3, /6-7/8 - /8., /8-7/8-4 7/8.00 4, /8 - /6-7/8.00 4, /8-5/6-7/8.00 4, Expander 5/8-7/8-3/8.03, /8-7/8-4 /8.00 3, /8 - /6 - /8.00 3, /8-5/6 - /8.00 3, /8-5/8 - /8.75 3, / - 5/8-3/4.00, / - 7/8-3/4.80,000 This part has an step (shoulder) shown above. Page 30 4: Safety Factor

16 information is on pages 6 7, 4 SAE J54 Fittings 640 Female ORB x Female Pipe C L Operating -FB -FP Female ORB Female NPTF Body Hex Length Pressure /6-8 3/8-8 7/8.30 6, /4-6 3/ , /4-6 / , /8-4 / - 4 /8.60 4,000 4: Safety Factor SAE J Female ORB Union Female ORB x Female ORB C L Operating -FB -FB Female ORB Female ORB Hex Length Pressure /4-6 3/ , /8-4 3/4-6 /8.4 4, /8-4 7/8-4 /8.45 4, /6 - /6-3/8.97 4,500 4: Safety Factor i Informational Tips CAUTION: Brazing or Welding on plated surfaces can give off toxic fumes resulting in personal injury and/or death. Page 3

17 Fittings Fitting and Port Assembled Adjustable ORB 360º Positioning Pressure Connections uses a 90 durometer, Buna-N (Nitrile) O-ring, with other compounds available upon request. The threads of the SAE straight thread (ORB) and the straight thread 37 JIC Flare are the same threads. The difference is the way each thread seals. While the JIC seals on a metal-to-metal flare, the ORB seals on an O-ring. This type of seal offers the best leak free connection, even if small nicks and dings are found on the sealing surfaces of the ports. This O-ring connection is highly recommended for medium and high pressure systems, and is excellent in vibration and/or temperature cycling environments. Since the seal takes place at the O-ring and not the threads, the fitting can be used multiple times. Simply replace the O-ring and it is ready for service again. Pressure Connections uses specially designed mandrels, or cones, to ensure that the threads never damage the o-ring during installation. The elbows and tees have an adjustable ORB thread that allows 360 positioning when tightening for an easy connection. For details about our Quality Assurance Program please reference the inside front cover of this catalog (0700) 6400L (0770) 6400R Fittings Pg. 8 Straight Thread Connector -MJ -MB 6408 (09009A) Pg. 9 Straight Pg. 0 Restrictor Pg. Pg. Pg. 3 Pg. 4 Thread Connector Long -MJ -MB Str. Thread Connector -MJ -MB Male ORB x Male Pipe -MB -MP Swivel Nut Adaptor -MB -FJX Female ORB x Male Pipe -FB -MP Male ORB x Male Pipe -MB -MP 6408-V (09009A) 6408-SOLID 6409 (09009B) 6409-V (09009B) Pg. 5 Male ORB Union -MB -MB (Adjustable) 645 Pg. 6 Pg. 7 Pg. 9 Solid Pg. 8 Pg. 9 Pg. 30 Pg. 3 Pg. 3 Hex Head ORB Plug Hex Head ORB Plug Hex Head ORB Plug Hex Socket ORB Plug Hex Socket ORB Plug ORB Reducer-Expander Female ORB x Female Pipe Female ORB Union -MB -MB (Viton ) -MB -MB -MB (Viton ) -MB -FB -FB -FP -FB -FB 680 (0700) 680L (0750) 680LL (0760) 680LLL (070) 680R 680 (07030) 6803 (07049) 6804 (07048) Pg. 43 Straight Thread Elbow -MJ -MB 6805 Pg. 45 Str Thr Elbow Long -MJ -MB 6805LL Pg. 46 S T Elbow Double Long -MJ -MB 6806 Pg. 46 S T Elbow Triple Long -MJ -MB 6807 Restrictor Straight Thread Elbow -MJ -MB 6809 Pg. 44 Pg. 47 Straight Thread Elbow -MJ -MB Pg. 48 ORB Branch Tee -MJ -MJ 3-MB 6900 (4057) Pg. 49 ORB Run Tee -MJ -MB 3-MJ 6900R 3 Pg. 50 ORB Female Elbow -MB -FP 690 (4057) Pg. 55 MB x NPSM Elbow -MB -FPX Pg. 50 ORB F E Double Long -MB -FP 690R Pg. 5 Pg. 5 Pg. 5 ORB Male Elbow ORB Union Elbow Swivel Nut Elbow -MB -MP -MB -MB -MB -FJX 690 (40357) Pg. 56 Restrictor Pg. 57 MB x NPSM Elbow -MB -FPX MB x NPSM Elbow -MB -FPX Pg. 5 Straight Thread Elbow -MB -FB Pg. 53 MB x NPSM Swivel -MB -FPX The and the 37 JIC Flare use the same threads. The difference is the way each thread seals. While the JIC seals on a metal-to-metal flare, the ORB seals on an O-Ring. We use a 90 O-Ring durometer, Boss Buna-N Torque (Nitirle) Values O-Ring are on with page Viton 7. as an option. An O-ring seal offers the best leak free connection. Viton is a trademark of DuPont Pg. 54 Restrictor MB x NPSM Swivel -MB -FPX Available in 36 Stainless Steel Page 4

18 information is on pages 6 7, 4 SAE 0700 Ref. Aeroquip 06 Ref. Parker C5OX / 503 Ref. Weatherhead C555 Fittings 680 Straight Thread Elbow Male JIC x Male ORB Available in 36 Stainless Steel Tube C M N Y Operating -MJ -MB O.D. Male JIC Male ORB Nut Hex Length Length Flats Pressure /8 5/6-4 5/6-4 7/ /6 6, /6 3/8-4 3/8-4 / /6 6, /4 7/6-0 5/6-4 7/ /6 6, /4 7/6-0 7/6-0 9/ /6 6, /4 7/6-0 / - 0 5/ /6 6, /4 7/6-0 9/6-8 / /6 6, /4 7/6-0 3/4-6 7/ /4 6, /6 / - 0 7/6-0 9/ /6 6, /6 / - 0 / - 0 5/ /6 6, /6 / - 0 9/6-8 / /6 6, /8 9/6-8 7/6-0 9/ /6 6, /8 9/6-8 / - 0 5/ /6 6, /8 9/6-8 9/6-8 / /6 6, /8 9/6-8 3/4-6 7/ /4 6, /8 9/6-8 7/8-4 " /8 5, /8 9/6-8 /6 - / /6 6, / 3/4-6 7/6-0 9/ /4 6, / 3/4-6 9/6-8 / /4 6, / 3/4-6 3/4-6 7/ /4 5, / 3/4-6 7/8-4 " /8 5, / 3/4-6 /6 - / /6 5, / 3/4-6 5/6 - / /6 4, /8 7/8-4 9/6-8 / /8 5, /8 7/8-4 3/4-6 7/ /8 5, /8 7/8-4 7/8-4 " /8 5, /8 7/8-4 /6 - / /6 5, /8 7/8-4 5/6 - / /6 4,000 Continued on next page. 4: Safety Factor Please Note 37 JIC Flare fittings seal on the flare. Careful handling will prevent damage and leaks. 3D Drawings available on request. Page 43

19 Fittings information is on pages 6 7, Straight Thread Elbow Male JIC x Male ORB SAE 0700 Ref. Aeroquip 06 Ref. Parker C5OX / 503 Ref, Weatherhead C555 Available in 36 Stainless Steel Continued from previous page Tube C M N Y Operating -MJ -MB O.D. Male JIC Male ORB Nut Hex Length Length Flats Pressure /4 /6-9/6-8 / /6 5, /4 /6-3/4-6 7/ /6 5, /4 /6-7/8-4 " /6 5, /4 /6 - /6 - / /6 5, /4 /6-3/6-3/ /4 5, /4 /6-5/6 - / /6 4, /4 /6-5/8-7/ /8 4, /8 3/6-3/6-3/ /6 5, " 5/6-3/4-6 7/ /6 4, " 5/6-7/8-4 " /6 4, " 5/6 - /6 - / /6 4, " 5/6-3/6-3/ /6 4, " 5/6-5/6 - / /6 4, " 5/6-5/8-7/ /8 4, /4 5/8 - /6 - / /8 4, /4 5/8-5/6 - / /8 4, /4 5/8-5/8-7/ /8 4, /4 5/8-7/8 - / /8 3, / 7/8-5/8-7/ /8 3, / 7/8-7/8 - / /8 3, " / - / - 3/ /, R - Restrictor Straight Thread Elbow 680R /4 7/6-0 7/6-0 9/ /6 6, R /8 9/6-8 9/6-8 / /6 6, R /8 9/6-8 9/6-8 / /6 6, R /8 9/6-8 9/6-8 / /6 6,000 4: Safety Factor Other RESTRICTOR Fittings 404R (pg. 9) 50R (pg. 33) 406R (pg. 57) 6400R (pg. 0) 680R (pg. 44) 6900R (pg. 54) 690R (pg. 56) Page 44

20 information is on pages 6 7, 4 SAE 0750 Ref. Weatherhead C555L Fittings 680L Straight Thread Elbow Long Male JIC x Male ORB 680L-- -4 Tube C M N Y Operating -MJ -MB O.D. Male JIC Male ORB Nut Hex Length Length Flats Pressure 680L /8 5/6-4 5/6-4 7/ /6 6, L /6 3/8-4 3/8-4 / /6 6, L /4 7/6-0 7/6-0 9/ /6 6, L /6 / - 0 / - 0 5/ /6 6, L /8 9/6-8 9/6-8 / /6 6, L / 3/4-6 3/4-6 7/ /4 6, L / 3/4-6 7/8-4 " /8 5, L /8 7/8-4 7/8-4 " /8 5, L---4 3/4 /6 - /6 - / /6 5, L " 5/6-5/6 - / /6 4, L /4 5/8-5/8-7/ /8 4, L / 7/8-7/8 - / /8 3, L " / - / - 3/ /8,000 4: Safety Factor Please Note 37 JIC Flare fittings seal on the flare. Careful handling will prevent damage and leaks. Page 45

21 Fittings information is on pages 6 7, 4 680LL Straight Thread Elbow Double Long SAE 0760 Ref. Aeroquip 0609 Ref. Parker CC5OX Ref, Weatherhead C555LL 680LL-- -4 Tube C M N Y Operating -MJ -MB O.D. Male JIC Male ORB Nut Hex Length Length Flats Pressure 680LL /8 5/6-4 5/6-4 7/ /6 6, LL /6 3/8-4 3/8-4 / /6 6, LL /4 7/6-0 7/6-0 9/ /6 6, LL /6 / - 0 / - 0 5/ /6 6, LL /8 9/6-8 9/6-8 / /6 6, LL / 3/4-6 3/4-6 7/ /4 6, LL /8 9/6-8 3/4-6 7/ /4 6, LL / 3/4-6 7/8-4 " /8 5, LL /8 7/8-4 7/8-4 " /8 5, LL---4 3/4 /6 - /6 - / /6 5, LL /8 3/6-3/6-3/ /6 5, LL " 5/6-5/6 - / /6 4, LL /4 5/8-5/8-7/ /8 4, LL / 7/8-7/8 - / /8 3, LLL - Straight Thread Elbow Triple Long 680LLL / 3/4-6 3/4-6 7/ /4 6,000 SAE # 070 Triple Long. 4: Safety Factor Please Note 37 JIC Flare fittings seal on the flare. Careful handling will prevent damage and leaks. Page 46

22 information is on pages 6 7, 4 Fittings SAE Ref. Aeroquip 06 Ref. Parker V5OX / 3503 Ref. Weatherhead C5365 Available in 36 Stainless Steel 680 Straight Thread Elbow Male JIC x Male Tube C M N Y Operating -MJ -MB O.D. Male JIC Male ORB Nut Hex Length Length Flats Pressure /4 7/6-0 7/6-0 9/ /6 6, /4 7/6-0 / - 0 5/ /6 6, /4 7/6-0 9/6-8 / /6 6, /6 / - 0 7/6-0 9/ /6 6, /6 / - 0 / - 0 5/ /6 6, /6 / - 0 9/6-8 / /6 6, /8 9/6-8 7/6-0 9/ /6 6, /8 9/6-8 / - 0 5/ /6 6, /8 9/6-8 9/6-8 / /6 6, /8 9/6-8 3/4-6 7/ /4 6, /8 9/6-8 7/8-4 " /8 6, / 3/4-6 9/6-8 / /4 6, / 3/4-6 3/4-6 7/ /4 6, / 3/4-6 7/8-4 " /8 5, / 3/4-6 /6 - / /6 5, /8 7/8-4 3/4-6 7/ /8 5, /8 7/8-4 7/8-4 "..5 7/8 5, /8 7/8-4 /6 - / /6 5, /4 /6-3/4-6 7/ /6 5, /4 /6-7/8-4 ".8.58 /6 5, /4 /6 - /6 - / /6 5, /4 /6-5/6 - / /6 4, /8 3/6-3/6-3/ /6 5, " 5/6 - /6 - / /6 4, " 5/6-5/6 - / /6 4, " 5/6-5/8-7/ /8 4, /4 5/8-5/6 - / /8 4, /4 5/8-5/8-7/ /8 4, / 7/8-7/8 - / /8 3, " / - / - 3/4..86 /,000 4: Safety Factor Page 47

23 Fittings information is on pages 6 7, ORB Branch Tee MJ x MJ x Male ORB Available in 36 Stainless Steel SAE Ref. Aeroquip Ref. Parker S5OX / 53T Ref. Weatherhead C Tube C M N Y Operating -MJ -MJ -MB O.D. Male JIC Male ORB Nut Hex Length Length Flats Pressure /4 7/6-0 7/6-0 9/ /6 6, /4 x 3/8 7/6-0 9/6-8 / /6 6, /6 / - 0 / - 0 5/ /6 6, /8 9/6-8 9/6-8 / /6 6, /8 x / 9/6-8 3/4-6 7/ /4 6, / 3/4-6 3/4-6 7/ /4 6, / x 5/8 3/4-6 7/8-4 " /8 5, / x 3/4 3/4-6 /6 - / /6 5, /8 7/8-4 7/8-4 " /8 5, /4 x 5/8 /6-7/8-4 " /6 5, /4 /6 - /6 - / /6 5, /4 x " /6-5/6 - / /6 4, " x 3/4 5/6 - /6 - / /6 4, " 5/6-5/6 - / /6 4, /4 5/8-5/8-7/ /8 4,000 4: Safety Factor Quality Assurance Tips Pressure Connections provides up to date Gauge Certifications as as part of our equipment and Gauge Calibration Program. We out-source our gauge calibrations to ensure inspection consistency. Page 48

24 information is on pages 6 7, 4 Fittings SAE Ref. Aeroquip Ref. Parker R5OX / 053T Ref. Weatherhead C576 Available in 36 Stainless Steel ORB Run Tee MJ x Male ORB x MJ Tube C M N Y Operating -MJ -MB -MJ O.D. Male JIC Male ORB Male JIC Nut Hex Length Length Flats Pressure /4 7/6-0 7/6-0 7/6-0 9/ /6 6, /6 / - 0 / - 0 / - 0 5/ /6 6, /4 x 3/8 7/6-0 9/6-8 7/6-0 / /6 6, /8 x /4 9/6-8 7/6-0 9/6-8 9/ /6 6, /8 9/6-8 9/6-8 9/6-8 / /6 6, /8 x / 9/6-8 3/4-6 9/6-8 7/ /4 6, / x 3/8 3/4-6 9/6-8 3/4-6 / /4 6, / 3/4-6 3/4-6 3/4-6 7/ /4 6, / x 5/8 3/4-6 7/8-4 3/4-6 " /8 5, /8 7/8-4 7/8-4 7/8-4 " /8 5, /8 x 3/4 7/8-4 /6-7/8-4 / /6 5, /4 x 5/8 /6-7/8-4 /6 - ".66.8 /6 5, /4 /6 - /6 - /6 - / /6 5, /4 x " /6 - /6-5/6 - / /6 4, " 5/6-5/6-5/6 - / /6 4, /4 5/8-5/8-5/8-7/ /8 4, / 7/8-7/8-7/8 - / /8 3,000 4: Safety Factor Please Note Torque Values are on page 7. Female JIC Swivel Torque Values are the same as the Male JIC Torque Values. Page 49

25 Fittings information is on pages 6 7, ORB Female Elbow Male x Female Pipe SAE J54 Ref. Aeroquip 0680 Ref. Parker AOEG Ref. Weatherhead C C M N Y Operating -MB -FP Male ORB Female NPTF Nut Hex Length Length Flats Pressure /6-0 /8-7 9/ /6 6, /6-0 /4-8 9/ /4 6, /6-8 /4-8 / /4 6, /6-8 3/8-8 / /8 4, /4-6 3/8-8 7/ /8 4, /4-6 / - 4 7/ /6 3, /4-6 3/4-4 7/ /6 3, /8-4 / - 4 ".8.0 /6 3, /8-4 3/ /6 3, /6-3/4-4 / /6 3, /6-3/4-4 3/ /6 3, /6 - - / /.5.6 5/8, /8 - /4 - / 7/ /8, / - - / 3/ /6,00 4: Safety Factor 6805LL ORB Female Elbow Double Long SAE J54 Ref. Aeroquip Ref. Parker AOE4G Ref. Weatherhead C LL-- -4 C M N Y Operating -MB -FP Male ORB Female NPTF Nut Hex Length Length Flats Pressure 6805LL /4-6 3/8-8 7/ /8 4, LL /8-4 / - 4 " /6 3, LL---4 /6-3/4-4 / /6 3, LL /6 - - / / /8,800 4: Safety Factor Page 50

26 information is on pages 6 7, 4 SAE J54 Ref. Weatherhead C3569 Fittings 6806 ORB Male Elbow Male x Male Pipe C M N Y Operating -MB -MP Male ORB Male NPTF Nut Hex Length Length Flats Pressure /6-0 /8-7 9/ /6 5, /6-0 /4-8 9/ /6 5, /6-8 /4-8 / /6 6, /6-8 3/8-8 /6.3. 3/4 6, /4-6 3/8-8 7/ /4 6, /4-6 / - 4 7/ /8 6, /8-4 / - 4 " /8 5, /6-3/4-4 / /6 4, /6 - - / / /6 3, /8 - /4 - / 7/ /8,500 4: Safety Factor SAE J ORB Union Elbow Male ORB x Male ORB C M Y Operating -MB -MB Male ORB Male ORB Nut Hex Length Flats Pressure /6-0 7/6-0 9/6.04 7/6 6, /6-8 9/6-8 /6.5 9/6 6, /4-6 9/6-8 7/8.45 /.44 3/4 6, /4-6 3/4-6 7/8.45 3/4 6, /8-4 7/8-4 ".70 7/8 5, /6 - /6 - /4.94 /6 5, /6-5/6 - /.05 5/6 4, /8-5/8-7/8.5 5/8 4,000 4: Safety Factor Page 5

27 Fittings information is on pages 6 7, Swivel Nut Elbow Male ORB x Female JIC Swivel SAE J54 Ref. Parker A0EX Female C C M N Y Operating -MB -FJX Male ORB JIC Swivel Nut Hex Nut Hex Length Length Flats Pressure /6-0 7/6-0 9/6 9/ / /6-8 9/6-8 /6 / /6 5, /4-6 9/6-8 7/8 / /4 5, /4-6 3/4-6 7/8 7/ /4 5, /8-4 7/8-4 " " /8 5, /6 - /6 - /4 / /6 5, /6-5/6 - / / /6 3, /8-5/8-7/8 ".5.3 5/8 3,600 4: Safety Factor 685 Straight Thread Elbow Male x Female ORB Union SAE J54 Ref. Parker AOEG C M N Y Operating -MB -FB Male ORB Female ORB Nut Hex Length Length Flats Pressure /6-0 7/6-0 9/ /4 5, /6-8 9/6-8 / /8 5, /4-6 3/4-6 7/ /6 5, /8-4 7/ /6 4, /6 - /6 - / /6 3,000 4: Safety Factor Page 5

28 Female Pipe Swivel information is on pages 6 7 ORB x NPSM Swivels SAE 4057 Ref. Aeroquip 066 Ref. Parker 0507 Ref. Weatherhead Male ORB x NPSM Adapter Female C C L Operating -MB -FPX Male ORB NPSM Swivel Body Hex Nut Hex Length Pressure /6-0 /8-7 9/6 9/6.06 5, /6-0 /4-8 9/6 /6.9 5, /6-0 3/8-8 /6 7/8.34 4, / - 0 /4-8 5/8 /6.8 5, /6-8 /4-8 /6 /6.9 4, /6-8 3/8-8 /6 7/8.37 4, /6-8 / - 4 3/4 ".57 3, /4-6 /4-8 7/8 /6.44 5, /4-6 3/8-8 7/8 7/8.53 3, /4-6 / - 4 7/8 ".5 3, /4-6 3/4-4 " /4.8, /8-4 3/8-8 " 7/8.59 4, /8-4 / - 4 " ".66 3, /8-4 3/4-4 " /4.79, /6 - / - 4 /4 ".7 4, /6-3/4-4 /4 /4.97 3, /6 - - / / /.0, /6-3/4-4 3/8 /4.9, /6-3/4-4 / /4.06, /6 - - / / /.03, /6 - /4 - / 3/4 7/8.3, /8 - - / 7/8 /.8, /8 - /4 - / 7/8 7/8., /8 - / - / /8 /8.39, / - - / 3/4 5/8.38,000 Length: Reference only. 4: Safety Factor ORB-NPSM Please Note Male pipes must have 30 chamfers to seal into NPSM Female Pipe Swivels. NPSM Female Pipe Swivel information is on pages 6 7. Page 53

29 ORB x NPSM Swivels Female Pipe Swivel information is on pages R Restrictor Male ORB x NPSM Adapter 3 SAE J R-- - Female C C L Operating -MB -FPX -Orifice Male ORB NPSM Swivel Orifice Body Hex Nut Hex Length Pressure 6900R /4-6 3/8-8 Blank 7/8 7/8.53 3, R /4-6 3/8-8 /6 7/8 7/8.53 3, R /4-6 / - 4 Blank 7/8 ".5 3, R /4-6 / - 4 /3 7/8 ".5 3, R /4-6 / - 4 /6 7/8 ".5 3, R /4-6 / - 4 /8 7/8 ".43 3, R /6-3/4-4 Blank /4 /4.97,00 Length: Reference only. 4: Safety Factor Other RESTRICTOR Fittings 404R (pg. 9) 50R (pg. 33) 406R (pg. 57) 6400R (pg. 0) 680R (pg. 44) 6900R (pg. 54) 690R (pg. 56) ORB-NPSM Quality Assurance Tips Pressure We Connections manufacture provides our parts up to date SAE Gauge specifications. Certifications This as part means of our you ll equipment get long and lasting, Gauge leak-free Calibration performance Program. from We out-source our gauge Pressure calibrations Connections to ensure fittings. inspection consistency. Page 54

30 Female Pipe Swivel information is on pages 6 7 SAE 4057 Ref. Aeroquip 068 Ref. Parker 507 Ref. Weatherhead 955 ORB x NPSM Swivels 690 Male ORB x NPSM Elbow Female C C M N Y Operating -MB -FPX Male ORB NPSM Swivel Nut Hex Nut Hex Length Length Flats Pressure /6-0 /4-8 9/6 / /6 5, /6-0 3/8-8 9/6 7/8.6. 9/6 4, /6-8 /4-8 /6 /6.9. 9/6 4, /6-8 3/8-8 /6 7/ /6 4, /6-8 / - 4 /6 ".4.9 3/4 3, /4-6 /4-8 7/8 / /4 5, /4-6 3/8-8 7/8 7/ /4 3, /4-6 / - 4 7/8 " /4 3, /4-6 3/4-4 7/8 / /6, /8-4 3/8-8 " 7/ /8 4, /8-4 / - 4 " " /8 3, /8-4 3/4-4 " / /6, /6-3/8-8 /4 7/ /6 4, /6 - / - 4 /4 " /6, /6-3/4-4 /4 / /6, /6 - - / /4 / /6, /6-3/4-4 3/8 / /6, /6-3/4-4 / / /6, /6 - - / / / /6, /8 - - / 7/8 /.5.0 5/8, /8 - /4 - / 7/8 7/ /8,000 Length: Reference only. 4: Safety Factor ORB-NPSM Please Note Male pipes must have 30 chamfers to seal into NPSM Female Pipe Swivels. NPSM Female Pipe Swivel information is on pages 6 7. Page 55

31 ORB x NPSM Swivels Female Pipe Swivel information is on pages R Restrictor Male ORB x NPSM Elbow SAE J R-- - Female C C M N Y Operating -MB -FPX -Orifice Male ORB NPSM Swivel Orifice Nut Hex Nut Hex Length Length Flats Pressure 690R /6-0 /4-8 Blank 9/6 /6.. 7/6 5, R /6-8 /4-8 Blank /6 /6.9. 9/6 4, R /6-8 /4-8 /6 /6 /6.9. 9/6 4, R /6-8 3/8-8 Blank /6 7/ /6 4, R /6-8 3/8-8 /6 /6 7/ /6 4, R /6-8 3/8-8 5/64 /6 7/ /6 4, R /4-6 3/8-8 Blank 7/8 7/ /4 3, R /4-6 3/8-8 /6 7/8 7/ /4 3, R /4-6 / - 4 Blank 7/8 " /4 3, R /4-6 / - 4 /3 7/8 " /4 3, R /4-6 / - 4 /6 7/8 " /4 3, R /4-6 / - 4 3/3 7/8 " /4 3,500 Length: Reference only. 4: Safety Factor Other RESTRICTOR Fittings ORB-NPSM 404R (pg. 9) 50R (pg. 33) 406R (pg. 57) 6400R (pg. 0) 680R (pg. 44) 6900R (pg. 54) 690R (pg. 56) i Informational Tips CAUTION: Brazing or Welding on plated surfaces can give off toxic fumes resulting in personal injury and/or death. Page 56

32 Female Pipe Swivel information is on pages 6 7 SAE Ref. Aeroquip 067 Ref. Parker 3507 Ref. Weatherhead 9365 ORB x NPSM Swivels 690 Male ORB x NPSM Elbow Female C C M N Y Operating -MB -FPX Male ORB NPSM Swivel Nut Hex Nut Hex Length Length Flats Pressure /6-0 /4-8 9/6 / /6 5, /6-8 /4-8 /6 / /6 4, /6-8 3/8-8 /6 7/ /6 4, /4-6 3/8-8 7/8 7/ /4 3, /4-6 / - 4 7/8 " /4 3, /8-4 3/8-8 " 7/ /8 4, /8-4 / - 4 " ".5.7 7/8 3, /8-4 3/4-4 " / /6, /6 - / - 4 /4 ".73.0 /6, /6-3/4-4 /4 / /6, /6 - - / / / /6, /8 - /4 - / 7/8 7/ /8,000 Length: Reference only. 4: Safety Factor ORB-NPSM Please Note Male pipes must have 30 chamfers to seal into NPSM Female Pipe Swivels. NPSM Female Pipe Swivel information is on pages 6 7. Page 57