aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Valves

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Valves"

Transcription

1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Catalog 095

2 Warning, Offer of Sale! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled Offer of Sale. Copyright 008 Parker Hannifin Corporation. All Rights Reserved Parker Hannifin Corporation

3 Index Table ofcontents Solenoid - /-way 1/8... page - - /-way 1/4... page /-way 1/... page /-way 1/8, 1/4, 1/... page 8-11 Air Pilot - 5/-way 1/8... page - 5/-way 1/4... page 1 Hand Lever - / & 5/-way 1/8... page / & 5/-way 1/4... page / & 5/-way 1/... page /-way 1/8... page /-way 1/4... page - - 5/-way 1/... page 4 Interference Sensing Module - 5/-way... page 5 ISO - Size 1... page Size... page Size... page Order Instructions... page - NAMUR - 5/-way 1/8... page /-way 1/4... page 6-7 Two-Hand Safety - 5/-way 1/8... page 8-5/-way 1/4... page 9 Oscillating - 5/-way 1/4... page Foot Pedal - /-way 1/4... page /-way 1/4... page Valve Mountings - Barstock Manifold 1/8... page 46 - Barstock Manifold 1/4... page 47 - ISO Subbase (1,, )... page Spare Parts/Accessories... page 50 Safety Guide... page Offer of Sale... page 56 1 Parker Hannifin Corporation

4 Characteristics Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M6 (M) Thread Weight (mass) lbs. (kg).54 (0.47) Single solenoid.84 (0.8) Double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min).45 (450) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) Continuous consumption Standard version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection 1) We recommend the use of mineral oil type VG to ISO 448 IP65 to DIN (with plug) /-Way Valve, 1/8 Inch Note: When using below freezing point it is necessary to consult factory. Plug to DIN 4650 form B /-Way Valve 1/8 Actuation: Solenoid - Single Solenoid - Double Solenoid Parker Hannifin Corporation

5 Dimensions & Ordering Information /-Way Valve, 1/8 Inch Dimensions (mm) 8 5, 5,6 69, ,5 M5 ca ,5 (10) pst (1) 1() pst G1/8 G1/8 4,5 4,5 6 ca ,6 15,5 10 () 5, , Version 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 10 / Single Solenoid/Spring Return S9 81RF-1/8-NG-.. PA S9 81RF-1/8U-NG-.. PD / Single Solenoid/Spring Return S9 81RF-1/8-NO-.. PA S9 81RF-1/8U-NO-.. PD / Double Solenoid S9 81-1/8-.. PA S9 81-1/8U-.. PD Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ /60Hz -- KZ 675 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. Parker Hannifin Corporation

6 Characteristics Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/4 Spool valve screws M6 (M4) Thread Weight (mass) lbs. (kg) 1.1 (0.5) Single solenoid 1. (0.6) Double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min) 1. (100) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) Continuous consumption Standard version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection 1) We recommend the use of mineral oil type VG to ISO 448 IP65 to DIN (with plug) /-Way Valve, 1/4 Inch Note: When using below freezing point it is necessary to consult factory. Plug to DIN 4650 form B /-Way Valve 1/4 Actuation: Solenoid - Single Solenoid - Double Solenoid 4 Parker Hannifin Corporation

7 41 Catalog 095 Dimensions & Ordering Information /-Way Valve, 1/4 Inch Dimensions (mm) *** ca. 09 ca ,5 10 M5 47 G 1/4 (1) 1() 6,5 6 (10) pst pst 10 () G 1/8 o 4, 4,5 o 7, ,5 5 15,5 5 6 Version 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number / Single Solenoid/Spring Return S9 81RF-1/4-NG-.. PA S9 81RF-1/4U-NG-.. PD / Single Solenoid/Spring Return S9 81RF-1/4-NO-.. PA S9 81RF-1/4U-NO-.. PD / Double Solenoid S9 81-1/4-.. PA S9 81-1/4U-.. PD Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ /60Hz -- KZ 675 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. 5 Parker Hannifin Corporation

8 Characteristics Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/ Spool valve screws M6 Thread Weight (mass) lbs. (kg) 1.69 (0.77) Single solenoid 1. (0.60) Double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) Continuous consumption Standard version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection 1) We recommend the use of mineral oil type VG to ISO 448 IP65 to DIN (with plug) /-Way Valve, 1/ Inch Note: When using below freezing point it is necessary to consult factory. Plug to DIN 4650 form B /-Way Valve 1/ Actuation: Solenoid - Single Solenoid - Double Solenoid 6 Parker Hannifin Corporation

9 Dimensions & Ordering Information /-Way Valve, 1/ Inch Dimensions (mm) ,5 57 pst 7 G1/ G1/ pst 70 6,5 Version 1/ Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number / Single Solenoid/Spring Return S9 81RF-1/-NG-.. PA S9 81RF-1/U-NG-.. PD / Single Solenoid/Spring Return S9 81RF-1/-NO-.. PA S9 81RF-1/U-NO-.. PD / Double Solenoid S9 81-1/-.. PA S9 81-1/U-.. PD Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ 5 61 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. 7 Parker Hannifin Corporation

10 Characteristics 5/-Way & 5/-Way Valve, 1/8, 1/4, 1/ Inch Features Type Spool Valve Mounting Screws Port connection Threaded Port size G/NPT 1/8 1 /4 1 / Installation In Any Position Ambient min F (-10 C) Note: temperature range max 0 F (+60 C) When using below freezing Medium min F (-10 C) point it is necessary to temperature range max 158 F (+70 C) consult factory. Medium Filtered Compressed Air Lubrication With or Without Oil Mist Lubrication 1) Pneumatic Characteristics Body 5/ Position 5/ Position Size Single Double Double 1/8 Minimum Pressure psi (bar) 9 () (1.5) 9 () Maximum Pressure psi (bar) 5 (10) 5 (10) 5 (10) Flow Cv (l/min) 0.5 (500) 0.5 (500) 0.6 (600) Weight lbs. (kg) 0.6 (0.8) 0.91 (0.415) 0.94 (0.45) 1/4 Minimum Pressure psi (bar) 9 () (1.5) 9 () Maximum Pressure psi (bar) 5 (10) 5 (10) 5 (10) Flow Cv (l/min) 1. (100) 1. (100) RFG,RFB:1.(100) RFE:1.0 (1000) Weight lbs. (kg) 1. (0.6) 1.54 (0.7) 1.54 (0.7) 1/ Minimum Pressure psi (bar) (.) (1.5) 6 (.5) Maximum Pressure psi (bar) 5 (10) 5 (10) 5 (10) Flow Cv (l/min).5 (500).5 (500) RFE:. (00) RFG:.5 (500) RFB:.6 (600) Weight lbs. (kg). (1.0).4 (1.1).4 (1.1) Voltage AC DC Nominal Standard Version V 4, 110, 0, 4 Voltage Others Contact Factory Power Consumption Inrush Body Size: 1/8 1/4 Body Size: 1/ AC DC AC DC 50 HZ 60 HZ 50 HZ 60 HZ.8 W 10.4VA 10.4VA 4.5 W 4 8.5VA 8.5VA.5 W 10.4VA 10.4VA 4.5 W VA 8.5VA.7 W 10.4VA 10.4VA 5.5 W 0 8.5VA 8.5VA.5 W 10.4VA 10.4VA 4.9 W Holding Body Size: 1/8 1/4 Body Size: 1/ AC DC AC DC 50 HZ 60 HZ 50 HZ 60 HZ.8 W 8.5VA 8.5VA 4.5 W 4 6.0VA 6.0VA.5 W 8.5VA 8.5VA 4.5 W VA 4.9VA.7 W 8.VA 6.6VA 5.5 W 0 6.0VA 4.9VA.5 W 8.5VA 6.9VA 4.9 W Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN (with plug) Installing material VDE 0580 Connection Plug to DIN 4650 Form B 5/-Way Valve 5/-Way Valve 1/8 1/4 1/ Actuation: Solenoid - Single Solenoid - Double Solenoid 1) We recommend the use of mineral oil type VG to ISO Parker Hannifin Corporation

11 Dimensions & Ordering Information 5/-Way & 5/-Way Valve, 1/8, 1/4, 1/ Inch VERSION 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/8-.. PA S9 581RF-1/8 U-.. PD / Double Solenoid S /8-.. PA S /8 U-.. PD / Double Solenoid/Center Blocked S9 581RFG-1/8-.. PA S9 581RFG-1/8 U-.. PD / Double Solenoid/Center Exhaust S9 581RFE-1/8-.. PA S9 581RFE-1/8 U-.. PD / Double Solenoid/Dual Center S9 581RFB-1/8-.. PA S9 581RFB-1/8 U-.. PD VERSION 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/4-.. PA S9 581RF-1/4 U-.. PD / Double Solenoid S /4-.. PA S /4 U-.. PD / Double Solenoid/Center Blocked S9 581RFG-1/4-.. PA S9 581RFG-1/4 U-.. PD / Double Solenoid/Center Exhaust S9 581RFE-1/4-.. PA S9 581RFE-1/4 U-.. PD / Double Solenoid/Dual Center S9 581RFB-1/4-.. PA S9 581RFB-1/4 U-.. PD Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ /60Hz -- KZ 675 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. VERSION 1/ Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/-.. PA S9 581RF-1/U-.. PD / Double Solenoid S /-.. PA S /U-.. PD / Double Solenoid/Center Blocked S9 581RFG-1/-.. PA S9 581RFG-1/U-.. PD / Double Solenoid/Center Exhaust S9 581RFE-1/-.. PA S9 581RFE-1/U-.. PD / Double Solenoid/Dual Center S9 581RFB-1/-.. PA S9 581RFB-1/U-.. PD Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ 5 61 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. 9 Parker Hannifin Corporation

12 G Catalog 095 Dimensions 5/-Way & 5/-Way Valve, 1/8 & 1/4 Inch Sizes: 1/8 & 1/4 Y X AC H AD N 5 4 AB 1 L AA H O K F T M Z pst H U ** A B C D E AE AG AH pst J W * *- Manual Override Push: Non-Locking Push & Turn: Locking S R P A B C D E F G H J K L M N O P / / R S T U W X Y Z AA AB AC AD AE AF AG /8 npt 1/8 npt M / G 1/8 G 1/ M /8 npt 1/4 npt M / G 1/8 G 1/ M Dimensions: BOLD= Inches; STANDARD= mm 10 Parker Hannifin Corporation

13 Dimensions 5/-Way & 5/-Way Valve, 1/ Inch Size: 1/ R P Y S X F G M C T pst K N A B D E H H ** L W 5 O 1 4 U H K pst J ** *- Manual Override Push: Non-Locking Push & Turn: Locking A B C D E F G H J K L M N O P / R S T U W X Y Z AA AB AC AD AE AF AG /8 npt 1/ npt / 70 1 G 1/8 G 1/ Dimensions: BOLD= Inches; STANDARD= mm 11 Parker Hannifin Corporation

14 Characteristics & Dimensions Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M5 Thread Weight (mass) lbs. (kg).5 (.160) Single Air Pilot.7 (.170) Double Air Pilot Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Air Pilot Direct Actuation Pressure p min psi (bar) 0 () Range p max 5 (10) p min psi (bar) (1.5) p max 5 (10) 1) We recommend the use of mineral oil type VG to ISO 448 Single Air Pilot Double Air Pilot 5/-Way Valve, 1/8 Inch Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/8 Actuation: Air Pilot - Single Air Pilot - Double Air Pilot Dimensions (mm) , 5, , G1/ ,6 5,5 5 only for type S /8 40 Version 1/8 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Single Air Pilot/Spring Return S9 561RF-1/8 PA 1010 S9 561RF-1/8U PD / Double Air Pilot S /8 PA 1011 S /8U PD 479 Parker Hannifin Corporation 11

15 Characteristics & Dimensions Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M5 Thread Weight (mass) lbs. (kg) 1.08 (.49) Single Air Pilot 1. (.) Double Air Pilot Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1. (100) Actuation Air Pilot Direct Actuation Pressure p min psi (bar) 0 () Range p max 5 (10) p min psi (bar) (1.5) p max 5 (10) 1) We recommend the use of mineral oil type VG to ISO 448 Single Air Pilot Double Air Pilot 5/-Way Valve, 1/4 Inch Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/4 Actuation: Air Pilot - Single Air Pilot - Double Air Pilot Dimensions (mm) ,5 67,5,5 G1/ o 4, G1/8 o 7,5, ,5 11 5,5 4,5,5 6,5 6 only for type S /4 S9 56-1/4 5 Version 1/4 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Single Air Pilot/Spring Return S9 561RF-1/4 PA 676 S9 561RF-1/4U PD 474 5/ Double Air Pilot S /4 PA 677 S /4U PD Parker Hannifin Corporation

16 Characteristics & Dimensions /-Way Valve, 1/8 Inch Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M5 Thread Weight (mass) lbs. (kg).56 (.16) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 11 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 4.5 (450) Actuation Manual control Direct Stroke in (mm).177 (4.5) Actuation force F b lbf (N) 1.57 (7) detent.5 (10) spring Note: When using below freezing point it is necessary to consult factory. /-Way Valve 1/8 Actuation: Hand lever - Detent - Spring Return 1) We recommend the use of mineral oil type VG to ISO 448 Dimensions (mm) , , G1/8 5, Version 1/8 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number / Hand Lever/Detent S9 11-1/8 PA 109 S9 11-1/8U PD / Hand Lever/Spring Return S9 11RF-1/8 PA 1094 S9 11RF-1/8U PD Parker Hannifin Corporation 1

17 Characteristics & Dimensions Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M5 Thread Weight (mass) lbs. (kg).49 (.195) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Manual control Direct Stroke in (mm).177 (4.5) Actuation force F b lbf (N) 1.57 (7) detent.5 (10) spring 1) We recommend the use of mineral oil type VG to ISO 448 5/-Way Valve, 1/8 Inch Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/8 Actuation: Hand lever - Detent - Spring Return Dimensions (mm) G1/ , , , Version 1/8 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Hand Lever/Detent S9 1-1/8 PA 1008 S9 1-1/8U PD / Hand Lever/Spring Return S9 1RF-1/8 PA 1009 S9 1RF-1/8U PD Parker Hannifin Corporation

18 Characteristics & Dimensions /-Way Valve, 1/4 Inch Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/4 Spool valve screws M6 Thread Weight (mass) lbs. (kg).81 (.7) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1. (100) Actuation Manual control Direct Stroke in (mm).56 (6.5) Note: When using below freezing point it is necessary to consult factory. Actuation force F b lbf (N).5 (10) detent & safety detent.7 (15) spring /-Way Valve 1/4 Actuation: Hand lever - Detent - Spring Return - Safety Detent 1) We recommend the use of mineral oil type VG to ISO 448 Dimensions (mm) , G1/ ,5 6 5 Version 1/4 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number / Hand Lever/Detent S9 11-1/4 PA 708 S9 11-1/4U PD / Hand Lever/Spring Return S9 11RF-1/4 PA 709 S9 11RF-1/4U PD / Hand Lever/Detent (safety) S9 11S-1/4 PA 710 S9 11RF-1/4U PD Parker Hannifin Corporation 15

19 Characteristics & Dimensions 5/-Way Valve, 1/4 Inch Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/4 Spool valve screws M6 Thread Weight (mass) lbs. (kg) 1. (.5) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Note: When using below freezing point it is necessary to consult factory. Filtered compressed air 5/-Way Valve 1/4 Actuation: Hand lever - Detent - Spring Return - Safety Detent Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1. (100) Actuation Manual control Direct Stroke in (mm).56 (6.5) Actuation force F b lbf (N).5 (10) detent.7 (15) spring 1) We recommend the use of mineral oil type VG to ISO 448 Dimensions (mm) , G1/4 1 6,5 6 5 Version 1/4 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Hand Lever/Detent S9 1-1/4 PA 671 S9 1-1/4U PD / Hand Lever/Spring Return S9 1RF-1/4 PA 67 S9 1RF-1/4U PD / Hand Lever/Detent (safety) S9 1S-1/4 PA 67 S9 1S-1/4U PD Parker Hannifin Corporation

20 Characteristics & Dimensions /-Way Valve, 1/ Inch Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/ Spool valve screws M6 Thread Weight (mass) lbs. (kg) 1.98 (.9) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Manual control Direct Stroke in (mm).70 (9.4) Actuation force F b lbf (N).7 (15) detent 8.99 (40) spring Note: When using below freezing point it is necessary to consult factory. /-Way Valve 1/ Actuation: Hand lever - Detent - Spring Return 1) We recommend the use of mineral oil type VG to ISO 448 Dimensions (mm) G1/ , Version 1/ Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number / Hand Lever/Detent S9 11-1/ PA S9 11-1/U PD 4549 / Hand Lever/Spring Return S9 11RF-1/ PA S9 11RF-1/U PD Parker Hannifin Corporation 17

21 Characteristics & Dimensions 5/-Way Valve, 1/ Inch Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/ Spool valve screws M6 Thread Weight (mass) lbs. (kg).64 (1.0) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Manual control Direct Stroke in (mm).70 (9.4) Actuation force F b lbf (N).7 (15) detent 8.99 (40) spring 1) We recommend the use of mineral oil type VG to ISO 448 Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/ Actuation: Hand lever - Detent - Spring Return Dimensions (mm) G1/ , Version 1/ Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Hand Lever/Detent S9 1-1/ PA 1667 S9 1-1/U PD / Hand Lever/Spring Return S9 1RF-1/ PA 1666 S9 1RF-1/U PD Parker Hannifin Corporation

22 Characteristics 5/-Way Valve, 1/8 Inch Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M5 Thread Weight (mass) lbs. (kg).49 (.195) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Manual control Direct Stroke in (mm).177 (4.5) Note: When using below freezing point it is necessary to consult factory. Actuating force F b lbf (N) G,E,B: 1.57 (7) RFG, RFE, RFB:.5 (10) 5/-Way Valve 1/8 Actuation: Hand lever - Detent - Spring Center 1) We recommend the use of mineral oil type VG to ISO Parker Hannifin Corporation

23 Dimensions & Ordering Information 5/-Way Valve, 1/8 Inch Dimensions (mm) , G1/ , , Version 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/-way Hand Lever/Detent; Blocked S9 1G-1/8 PA 101 S9 1G-1/8U PD /-way Hand Lever/Detent; Exhausted S9 1E-1/8 PA 10 S9 1E-1/8U PD /-way Hand Lever/Detent; Dual S9 1B-1/8 PA 10 S9 1B-1/8U PD /-way Hand Lever/Spring; Blocked S9 1RFG-1/8 PA 104 S9 1RFG-1/8U PD /-way Hand Lever/Spring; Exhausted S9 1RFE-1/8 PA 105 S9 1RFE-1/8U PD /-way Hand Lever/Spring; Dual S9 1RFB-1/8 PA 106 S9 1RFB-1/8U PD Parker Hannifin Corporation

24 Characteristics 5/-Way Valve, 1/4 Inch Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/4 Spool valve screws M6 Thread Weight (mass) lbs. (kg) 1. (.5) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) RFG, RFB: 1. (100) RFE: 1.0 (1000) Actuation Manual control Direct Stroke in (mm).56 (6.5) Note: When using below freezing point it is necessary to consult factory. Actuating force F b lbf (N) G,E,B:.5 (10) RFG, RFE, RFB:.7 (15) 5/-Way Valve 1/4 Actuation: Hand lever - Detent - Spring Center - Safety Detent 1) We recommend the use of mineral oil type VG to ISO 448 Parker Hannifin Corporation

25 Dimensions & Ordering Information 5/-Way Valve, 1/4 Inch Dimensions (mm) 1 44 * , G1/4 1 6,5 6 *Safety hand lever 5 Version 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/-way Hand Lever/Detent; Blocked S9 1G-1/4 PA 687 S9 1G-1/4U PD /-way Hand Lever/Detent; Exhausted S9 1E-1/4 PA 688 S9 1E-1/4U PD /-way Hand Lever/Detent; Dual S9 1B-1/4 PA 689 S9 1B-1/4U PD /-way Hand Lever/Spring; Blocked S9 1RFG-1/4 PA 690 S9 1RFG-1/4U PD /-way Hand Lever/Spring; Exhausted S9 1RFE-1/4 PA 691 S9 1RFE-1/4U PD /-way Hand Lever/Spring; Dual S9 1RFB-1/4 PA 69 S9 1RFB-1/4U PD /-way Hand Lever/Detent; Blocked (safety) S9 1SG-1/4 PA 69 S9 1SG-1/4U PD /-way Hand Lever/Detent; Exhausted (safety) S9 1SE-1/4 PA 694 S9 1SE-1/4U PD /-way Hand Lever/Detent; Dual (safety) S9 1SB-1/4 PA 695 S9 1SB-1/4U PD Parker Hannifin Corporation

26 Characteristics & Dimensions Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/ Spool valve screws M6 Thread Weight (mass) lbs. (kg).64 (1.0) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Manual control Direct Stroke in (mm).70 (9.4) Actuating force F b lbf (N).7 (15) 1) We recommend the use of mineral oil type VG to ISO 448 5/-Way Valve, 1/ Inch Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/ Actuation: Hand lever - Detent Dimensions (mm) G1/ ,5 1,5 70 Version 1/ Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/-way Hand Lever/Detent; Blocked S9 1G-1/ PA 1669 S9 1G-1/U PD Parker Hannifin Corporation

27 Characteristics & Ordering Information 5/-Way Valve, 1/4 Inch Pressures quoted as gauge pressure Characteristics Unit Description General Features Type Style Port size G 1/4 Body ported valve Spool valve Weight (mass) lbs. (kg) 1.4 (0.65) Installation In any position Ambient temperature minimum F ( C) (-10) maximum 0 (+60) Medium temperature minimum F ( C) (-10) maximum 158 (+70) Pneumatic Characteristics Medium Air Nominal pressure psi (bar) 87 (6) Operating pressure minimum psi (bar) (1.5) maximum 116 (8) Nominal flow Cv (I/min) 1. (100) Filtration 40 micron recommended Lubrication With or without lubrication 1) Electrical Characteristics Voltage AC V 110, 0 DC, 4 Duty cycle Continuous duty Electric protection IP65 to DIN Insulating Material VDE 0580 Connection Plug to DIN 4650 form B 5/-Way Valve 1/4 Interference Sensing Module The interference sensing module was designed to automatically reverse the direction of a pneumatic cylinder, when it detects an obstruction. Loss of back pressure, caused by an obstruction, triggers the built-in pressure switch to shift the valve and retract the cylinder. Applications: Doors Machine Guards Conveyor Transfer Pallet Handling Feed Systems Elevator Systems Variable Height Pick & Place 1) We recommend the use of mineral oil type VG to ISO 448 Version 1/4 Order Number Description Ports Voltage IS /-way IS-module G1/4 vdc IS /-way IS-module G1/4vDC IS /-way IS-module G1/4 110vAC IS /-way IS-module G1/0vAC 5 Parker Hannifin Corporation

28 Characteristics 5/-Way & 5/-Way Valve, ISO 5599, Size 1 Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Port size Base plate G1/4 (base plate) Weight (mass) lbs. (kg) 1.01 (0.46) signal solenoid 1.0 (0.59) double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 9 () range -1 (Version S) p max psi (bar) 174 () Nominal flow 5/-way valve 5/-way valve Actuation Electrical Q N Cv (l/min) 1.7 (1680) 1.7 (1680) Actuation pressure p at min psi (bar) 9 () range p at max psi (bar) 5 (10) Pilot operated Pilot operated with external pilot air Voltage type AC DC Nominal Voltage Standard version U n V 0 4 Low watt. version U n V 0 4 Further voltages available on request Initial Power Consumption Standard version VA (W) Low watt. version VA (W) Continuous Power Consumption Standard version VA (W) Low watt. version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection Note: When using below freezing point it is necessary to consult factory. IP65 to DIN (with plug) Plug to DIN 4650 form B 5/-Way Valve 5/-Way Valve ISO 5599 Size 1 Actuation: Solenoid - Single Solenoid - Double Solenoid - Spring Center Delivery Includes: valve mounting screws gasket solenoid coil(s) 1) We recommend the use of mineral oil type VG to ISO Parker Hannifin Corporation

29 Characteristics 5/-Way & 5/-Way Valve, ISO 5599, Size 1 Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Port size Base plate G1/4 (base plate) Weight (mass) lbs. (kg).70 (0.) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) -1 (-0.9) range p max 174 () Nominal flow 5/-way valve 5/-way valve Actuation Pneumatic Q N Cv (l/min) 1.7 (1680) 1.7 (1680) Direct Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 5 (10) 1) We recommend the use of mineral oil type VG to ISO 448 Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 5/-Way Valve ISO 5599 Size 1 Actuation: Air Pilot - Single Air Pilot - Double Air Pilot - Spring Center Delivery Includes: valve mounting screws gasket C 7 Parker Hannifin Corporation

30 Characteristics 5/-Way & 5/-Way Valve, ISO 5599, Size Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Port size Base plate G/8 (base plate) Weight (mass) lbs. (kg) 1.54 (0.70) single solenoid 1.8 (0.8) double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 9 () range -1 (Version S) p max psi (bar) 174 () Nominal flow 5/-way valve 5/-way valve Actuation Electrical Actuation pressure p st min bar range p st max bar Q N Cv (l/min) 4. (40) 4. (40) Pilot operated Pilot operated with external pilot air Voltage type AC DC Nominal Voltage Standard version U n V 0 4 Low watt. version U n V 0 4 Further voltages available on request Initial Power Consumption Standard version VA (W) Low watt. version VA (W) Continuous Power Consumption Standard version VA (W) Low watt. version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection Note: When using below freezing point it is necessary to consult factory. IP65 to DIN (with plug) Plug to DIN 4650 form B 5/-Way Valve 5/-Way Valve ISO 5599 Size Actuation: Solenoid - Single Solenoid - Double Solenoid - Spring Center Delivery Includes: valve mounting screws gasket solenoid coil(s) 1) We recommend the use of mineral oil type VG to ISO Parker Hannifin Corporation

31 Characteristics 5/-Way & 5/-Way Valve, ISO 5599, Size Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Port size Base plate G/8 (base plate) Weight (mass) lbs. (kg) 1. (0.56) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) -1 (-0.9) range p max 174 () Nominal flow 5/-way valve 5/-way valve Actuation Pneumatic Q N Cv (l/min) 4. (40) 4. (40) Direct Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 174 () 1) We recommend the use of mineral oil type VG to ISO 448 Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 5/-Way Valve ISO 5599 Size Actuation: Air Pilot - Single Air Pilot - Double Air Pilot - Spring Center Delivery Includes: valve mounting screws gasket 9 Parker Hannifin Corporation

32 Characteristics 5/-Way & 5/-Way Valve, ISO 5599, Size Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Port size Base plate G1/ (base plate) Weight (mass) lbs. (kg).71 (1.) single solenoid.01 (1.7) double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 9 () range -1 (Version S) p max psi (bar) 174 () Nominal flow 5/-way valve 5/-way valve Actuation Electrical Q N Cv (l/min) 6.5 (6540) 6.5 (6540) Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 5 (10) Pilot operated Pilot operated with external pilot air Voltage type AC DC Nominal Voltage Standard version U n V 0 4 Low watt. version U n V 0 4 Further voltages available on request Initial Power Consumption Standard version VA (W) Low watt. version VA (W) Continuous Power Consumption Standard version VA (W) Low watt. version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection Note: When using below freezing point it is necessary to consult factory. IP65 to DIN (with plug) Plug to DIN 4650 form B 5/-Way Valve 5/-Way Valve ISO 5599 Size Actuation: Solenoid - Single Solenoid - Double Solenoid - Spring Center Delivery Includes: valve mounting screws gasket solenoid coil(s) 68 1) We recommend the use of mineral oil type VG to ISO Parker Hannifin Corporation

33 Characteristics 5/-Way & 5/-Way Valve, ISO 5599, Size Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Port size Base plate G1/ (base plate) Weight (mass) lbs. (kg).4 (1.1) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) -1 (-0.9) range p max 174 () Nominal flow 5/-way valve 5/-way valve Actuation Pneumatic Q N 1/min 6.5 (6540) 6.5 (6540) Direct Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 174 () 1) We recommend the use of mineral oil type VG to ISO 448 Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 5/-Way Valve ISO 5599 Size Actuation: Air Pilot - Single Air Pilot - Double Air Pilot - Spring Center Delivery Includes: valve mounting screws gasket 1 Parker Hannifin Corporation

34 Ordering Information 5/-Way ORDER INSTRUCTIONS: 5/-Way Actuation Symbol Type Number Order Number Size 5/ Single Air Pilot S0561RF-01 PA 891 VDMA 01 Spring Return S0581S-RF-1-.. PA Size 1 pst 4 4 Spring Return S0561RF-1 PA 869 Size 1 4 Spring Return S0581RF-1-.. PA Size 1 4 pst 5 1 pst S0561RF- PA 1645 Size S0561RF- PA 1646 Size 5/ Single Air Pilot S0561R-01 PA 89 VDMA 01 Air Spring Return S0561R-1 PA 870 Size 1 S0561R- PA 1648 Size S0561R- PA 1649 Size 5/ Double Air Pilot S PA 89 VDMA 01 S PA 868 Size 1 S0561- PA 164 Size S0561- PA 164 Size 5/ Single Solenoid S0581RF PA VDMA 01 S0581RF--.. PA Size S0581RF--.. PA Size 5/ Single Solenoid S0581S-RF PA VDMA 01 with external pilot air S0581S-RF--.. PA Size S0581S-RF--.. PA Size 5/ Single Solenoid S0581R PA VDMA 01 Air Spring Return S0581R-1-.. PA Size 1 S0581R--.. PA Size S0581R--.. PA Size 5/ Double Solenoid S PA VDMA 01 S PA Size 1 S PA Size S PA Size 5/ Double Solenoid S0581S PA VDMA 01 with external pilot air S0581S-1-.. PA Size 1 S0581S--.. PA Size S0581S--.. PA Size Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ 5 61 Other voltages available. Contact factory. Parker Hannifin Corporation

35 Ordering Information 5/-Way ORDER INSTRUCTIONS: 5/-Way Actuation Symbol Type Number Order Number Size 5/ Double Air Pilot S0561RFG-01 PA 894 VDMA 01 Closed Center S0561RFG-1 PA 871 Size 1 Dual Center S0561RFB-1 PA 87 Size 1 4 S0561RFG- PA 1641 Size S0561RFG- PA 164 Size S0561RFB- PA 1647 Size Open Center S0561RFE-01 PA 895 VDMA 01 S0561RFE-1 PA 87 Size 1 S0561RFE- PA 1644 Size S0561RFE- PA 1645 Size 5/ Double Solenoid S0581RFG-01 PA VDMA 01 Closed Center S0581RFG-1-.. PA Size 1 S0581RFG--.. PA Size S0581RFG--.. PA Size Dual Center S0581RFB-1-.. PA Size 1 S0581RFB--.. PA Size Open Center S0581RFE-01 PA VDMA 01 Closed Center pst pst S0581S-RFG--.. PA Size pst pst S0581RFE-1-.. PA Size 1 S0581RFE--.. PA Size S0581RFE--.. PA Size 5/ Double Solenoid S0581S-RFG PA VDMA 01 with external air pilot S0581S-RFG-1-.. PA Size 1 S0581S-RFG--.. PA Size Dual Center S0581S-RFB-1-.. PA Size 1 S0581S-RFB--.. PA Size Open Center S0581S-RFE PA VDMA 01 pst pst S0581S-RFE-1-.. PA Size 1 S0581S-RFE--.. PA Size S0581S-RFE--.. PA Size Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ 5 61 Other voltages available. Contact factory. Parker Hannifin Corporation

36 Characteristics Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M5 Thread Weight (mass) lbs. (kg).616 (0.80) Single solenoid.91 (0.415) Double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) Continuous consumption Standard version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection 1) We recommend the use of mineral oil type VG to ISO 448 IP65 to DIN (with plug) 5/-Way Valve, 1/8 Inch, NAMUR Note: When using below freezing point it is necessary to consult factory. Plug to DIN 4650 form B 5/-Way Valve 1/8 with NAMUR connection Actuation: Solenoid - Single Solenoid - Double Solenoid Delivery Includes: valve mounting screws coding pin o-rings 4 Parker Hannifin Corporation

37 Dimensions & Ordering Information 5/-Way Valve, 1/8 Inch, NAMUR Dimensions (mm) ca.08 M5 5, 4 10,5 19, , ,5 8 ca.0 5,5 x deep Mounting Dimensions to NAMUR standards 4 G1/ , ,5 6 Version 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/8-SO PD 4-.. S9 581RF-1/8U-SO PD / Double Solenoid S /8-SO PD S /8U-SO PD Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ /60Hz -- KZ 675 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. Accessory: Order # NAMURPLATE-1/8 Description Converts the 5/-way valve to a /-way valve 5 Parker Hannifin Corporation

38 Characteristics Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/4 Spool valve screws M5 Thread Weight (mass) lbs. (kg) 1. (0.6) Single solenoid 1.54 (0.7) Double solenoid Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min) 1. (100) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) Continuous consumption Standard version VA (W) Duty cycle ED % Continuous Duty Electrical protection Insulating material VDE 0580 Connection 1) We recommend the use of mineral oil type VG to ISO 448 IP65 to DIN (with plug) 5/-Way Valve, 1/4 Inch, NAMUR Note: When using below freezing point it is necessary to consult factory. Plug to DIN 4650 form B 5/-Way Valve 1/4 with NAMUR connection Actuation: Solenoid - Single Solenoid - Double Solenoid Delivery Includes: valve mounting screws coding pin o-rings 6 Parker Hannifin Corporation

39 Dimensions & Ordering Information 5/-Way Valve, 1/4 Inch, NAMUR Dimensions (mm) 4 0,5 5,5 x deep 5, ,7,7 G1/ ca ,5 ca M5 Mounting Dimensions to NAMUR standards 0 15,5 6 5 Version 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/4-SO PD S9 581RF-1/4U-SO PD / Double Solenoid S /4-SO PD S /4U-SO PD Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ vdc 60 50/60Hz KZ /60Hz 48 vdc KZ /60Hz 110 vdc KZ /60Hz -- KZ 675 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. Accessory: Order # NAMURPLATE-1/4 Description Converts the 5/-way valve to a /-way valve 7 Parker Hannifin Corporation

40 Characteristics & Dimensions 5/-Way Valve, 1/8 Inch, Safety Operation Characteristics to VDI 90 Pressures quoted as gauge pressure Characteristics Symbol Unit Description General Features Type Mounting Tube connection Port size NPT (G) 1/8 Spool valve screws M5 (M) Thread Weight (mass) lbs. (kg).594 (.7) Installation In any position Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Medium ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Medium Filtered compressed air Lubrication With or without oil mist lubrication 1) Pneumatic Characteristics Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Pneumatic Direct Actuating pressure p st min psi (bar) 9 () range p st max 5 (10) 1) We recommend the use of mineral oil type VG to ISO 448 Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/8 for two-hand safety operation Actuation: Pneumatic 1 t 5 1 The valve switches from outlet 4 to outlet only if both signal inputs are actuated simultaneously or within 0.5 seconds. The valve will not switch again until both signal inputs are stopped. For the safety of operating personnel in manufacturing processes such as pressing, bending, stamping, deburring etc. Not suitable for control systems of eccentric or similar presses. &.1. Dimensions (mm) 45 8, , G1/8 18 6,7 /1 / 18 G1/8 5 5,5 40 Version 1/8 Metric Version NPT Version Description Type Number Order Number Type Number Order Number Two-hand safety valve S9 56/65RF-1/8-SO PD 767 S9 56/65RF-1/8U-SO PD Parker Hannifin Corporation 7

G1/4 Q8. Standard with biased position

G1/4 Q8. Standard with biased position Contents Version Actuation Page Characteristics Dimensions x / Way Valves pneumatic 6,7, 0 9 electric 6,7 9, 9 / Way Valves pneumatic 6,7, 0 electric 6,7, 0 / Way Valves pneumatic 6,7,, 6, 7 electric 6,7,,

More information

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

More information

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports

More information

Direct solenoid and solenoid pilot operated valves

Direct solenoid and solenoid pilot operated valves Direct solenoid and solenoid pilot operated valves Individual mounting Series inline Manifold mounting 5 stacking sub-base non plug-in 100 Manual operator 00 Sealed solenoid enclosure Armature 55 56 57

More information

VAL-146. ISO Star Series Valves 5/2 and 5/3 solenoid and air pilot actuated valves. Valves. Technical Data

VAL-146. ISO Star Series Valves 5/2 and 5/3 solenoid and air pilot actuated valves. Valves. Technical Data Valves NITUFF coated non-corrosive spool and sleeve for long trouble free life (100 million plus cycles) Integral flow controls for cylinder speed control on size #1, and #2 models Low power solenoids

More information

97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve

97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve 9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual

More information

Single sub-base valve

Single sub-base valve solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet

More information

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large

More information

type V46, solenoid or pneumatic operated

type V46, solenoid or pneumatic operated SPECIFICATION general type of construction spool valve operator solenoid or pneumatic operated or by manual override. Manual override is equipped with a monostable function (push) and a bistable function

More information

VAL-74. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm VALVES

VAL-74. V40/V41 Mini ISO Star Valves 2x3/2, 5/2 and 5/3, Solenoid and Pilot Actuated ISO / VDMA Size 18 mm VALVES V40/V4 Mini ISO Star Valves 2x/2, /2 and /, Solenoid and Pilot Actuated ISO 407- / VDMA 24 6 Size 8 mm Compact design and high performance Flexible Sub-base system True multipressure system Sandwich regulators

More information

4 Posiflow Proportional Solenoid Valves

4 Posiflow Proportional Solenoid Valves 4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,

More information

ISO Star Series Valves A long life (100 to 200 million cycles) precision spool and sleeve directional control air valve

ISO Star Series Valves A long life (100 to 200 million cycles) precision spool and sleeve directional control air valve Section 5 ISO Star Series Valves A long life (100 to 200 million cycles) precision spool and sleeve directional control air valve Contents Features and Benefits............VAL-5-2 Specifications and Technical

More information

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves

UM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking

More information

Max-Air Technology Inc. NAMUR SOLENOID VALVE 4 and NEMA 7. Technical Data. Material

Max-Air Technology Inc. NAMUR SOLENOID VALVE 4 and NEMA 7. Technical Data. Material Technical Data Port connections Inlet and exhaust Outlet DIN connector (NEMA 4 Pictured) NAMUR SOLENOID VALVE NEMAs 4 and NEMA 7 1/4 NPT NAMUR interface 1/2" NPT Pressure Range: 30 to 150 PSI Flow factor:

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

Pressure relief valves type ARAM two stage, in line mounting - G 3/4" and G 1 1 /4" threaded ports

Pressure relief valves type ARAM two stage, in line mounting - G 3/4 and G 1 1 /4 threaded ports www.atos.com Table C04520/E Pressure relief valves type ARAM two stage, in line mounting G 3/4" and G 1 1 /4" threaded ports ARAM20/20...E ARAM32.../V ARAM are two stage pressure relief valves with balanced

More information

PILOT VALVE BOXES containing 2 to 12 valves 2/2 normally closed, direct operated 1/8

PILOT VALVE BOXES containing 2 to 12 valves 2/2 normally closed, direct operated 1/8 PILOT VALVE BOXES containing 2 to 12 valves 2/2 normally closed, direct operated 1/8 NC OUT IN 2/2 Series 110 EATURES Compact pilot boxes with direct operated, integrated pilot valves Especially designed

More information

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power .55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard

More information

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders

More information

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted

UM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils

More information

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm) Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers

More information

Electro-pneumatic control valves

Electro-pneumatic control valves Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N

More information

97100 NAMUR 3/2, 5/2 & 5/3 way spool valves electromagnetic actuated, indirectly controlled flanged with NAMUR Interface, G 1/4, 1/4 NPT

97100 NAMUR 3/2, 5/2 & 5/3 way spool valves electromagnetic actuated, indirectly controlled flanged with NAMUR Interface, G 1/4, 1/4 NPT 9700 NAMUR /, / & / way spool valves electromagnetic actuated, indirectly controlled flanged with NAMUR Interface, G /, / NPT For single and double operated actuators Crossover-free switching, switch-over

More information

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE

VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE VSNG6 SOLENOID OPERATED DIRECTIONAL CONTROL VALVE COMPACT SIZE NFPA D03 MOUNTING INTERFACE ISO 4401-03-02-0-94 (CETOP 4.2-4-03-250) SUBPLATE MOUNTING NFPA D03 ISO 4401-03 (CETOP 03) NG6 Pressure max 4060

More information

4/2-Way Pneumatic Solenoid Valve

4/2-Way Pneumatic Solenoid Valve 4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug

More information

Scavenging and Pressure Relief Valve Block SDVB

Scavenging and Pressure Relief Valve Block SDVB Brueninghaus Hydromatik Scavenging and Pressure Relief Valve Block SDVB Control Elements of the A4VSG and A2P RE 95533/03.96 RE 95533/03.96 Replaces 01.82 The scavenging and pressure relief valve block

More information

Proportional pressure regulators VPPE

Proportional pressure regulators VPPE Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES 2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the

More information

High Pressure Solenoid Valves

High Pressure Solenoid Valves High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, & other High Pressure Gases High Pressure Cryogenics Flammable Liquids & Gases

More information

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03. Catalogue Directional Cetop Valves DCV 03 Power Flu uid Power d Power P wer Power Power Power Power Power d Power Power Power ower Power Power wer Power Power P Power Power Powe d Power Power Power Power

More information

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010

RPE3-04. Functional Description HA 4014 09/2013. Directional Control Valves Solenoid Operated. Replaces HA 4014 10/2010 Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid

More information

ASL Series Pump. Operation and Maintenance Manual Air Driven, High Pressure Liquid Pump

ASL Series Pump. Operation and Maintenance Manual Air Driven, High Pressure Liquid Pump ASL Series Pump Operation and Maintenance Manual Air Driven, High Pressure Liquid Pump Catalog: 02-9233ME February 2013 Model # Serial # Drawing # Order # Mfg. Date Table of Contents page 1.0 Introduction...

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A609/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,

More information

2.12. page 223 2.12. Products for Explosion hazardous Environment

2.12. page 223 2.12. Products for Explosion hazardous Environment 2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available

More information

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007

RPE3-04. Functional Description HA 4014 10/2010. Directional Control Valves Solenoid Operated. Replaces HA 4014 12/2007 Directional Control Valves Solenoid Operated RPE3-04 Size D 04 (02) 320 bar (4600 PSI) 30 L/min(8.0 GPM) HA 4014 10/2010 Replaces HA 4014 12/2007 4/3-, 4/2- way directional control valves with solenoid

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics 3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,

More information

3 Way Proportional Pressure Control Valve Nominal diameter 2 Direct operated poppet valves Flange design Low hysteresis

3 Way Proportional Pressure Control Valve Nominal diameter 2 Direct operated poppet valves Flange design Low hysteresis VP0 Way Proportional Pressure Control Valve Nominal diameter Direct operated poppet valves Flange design Low hysteresis Good repeatability High flow capacity at exhaust port Manifold mountable system Compact

More information

Centro-Matic Automatic Lubrication Systems System Controls

Centro-Matic Automatic Lubrication Systems System Controls Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the

More information

Pressure relief valves type AGAM two stage, subplate mounting - ISO 6264 size 10, 20 and 32

Pressure relief valves type AGAM two stage, subplate mounting - ISO 6264 size 10, 20 and 32 www.atos.com Table C06619/E Pressure relief valves type AGAM two stage, subplate mounting ISO 6264 size 10, 20 and 32 1 MODEL CODE AGAM10/11...E AGAM20/.../V AGAM are two stage pressure relief valves with

More information

Directional seated valves type VP 1

Directional seated valves type VP 1 Directional seated valves type VP 1 zero leakage, intended for general hydraulic applications and grease lubing systems Flow Q max Operation pressure p max = 15 lpm = 400 bar Individual valve Individual

More information

3/2- and 2/2-way cartridge valve type BVE

3/2- and 2/2-way cartridge valve type BVE 3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type

More information

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm

More information

On-off valves MS-EM/EE, MS series, NPT

On-off valves MS-EM/EE, MS series, NPT On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12

More information

L01 Series Direct Solenoid Actuated Valves

L01 Series Direct Solenoid Actuated Valves Series Direct Solenoid ctuated Valves www.numatics.com Table of Contents L0 Series Technical and Operating Data 3 How to Order 4 Valve Dimensions 5 Manifold ssembly 6 Speed Control Kit 7 Mounting Kit 7

More information

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00. Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the

More information

3/2-way Solenoid Valve, direct-acting, NC or NO

3/2-way Solenoid Valve, direct-acting, NC or NO 3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined

More information

Pilot Operated Pressure Relief Valves Series R4V / R6V

Pilot Operated Pressure Relief Valves Series R4V / R6V Characteristics Series RV / R6V Pilot operated pressure relief valves series RV (DIN 230 Form D) and R6V (DIN 230 Form E) consist of a manually adjusted pilot stage and a seated type main stage. A vent

More information

Assisted lift operated 2/2-way solenoid valves Type EV250B

Assisted lift operated 2/2-way solenoid valves Type EV250B MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way

More information

Pressure sensing and control

Pressure sensing and control Pressure sensing and control A comprehensive range of Pressure Switches, providing a range of different options for converting pressure changes into an electrical signal. The range includes electromechanical

More information

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot

SPOOL VALVES solenoid air operated 1/4 to 1/2 tapped body and NAMUR for integrated pilot SPOOL VALVES operated / to / tapped body and NAMUR for integrated pilot ATEX /-/ Series - FEATURES The valves offer environmental protection against the ingress of liquids, dusts or other foreign matter

More information

Electro-Pneumatic Pressure Control Valves (Pages from SC-Master2 Catalog) The Drive & Control Company

Electro-Pneumatic Pressure Control Valves (Pages from SC-Master2 Catalog) The Drive & Control Company Electro-Pneumatic Pressure Control Valves (Pages from SC-Master2 Catalog) The Drive & Control Company E/P (Electro-Pneumatic) Pressure Control Valves Index Page Series ED02, proportional solenoid, analog

More information

3 Port Solenoid Valve

3 Port Solenoid Valve ubber Seal ort Solenoid Valve Series SYJ00/00/700 [Option] SYJ VQZ V VG Improved pilot valve ilot valve cover is stronger using stainless steel. Mounting thread is also reinforced from size M1.7 to M.

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS

HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SF-2C-115A-35 S-1AY-12D-35 SD-2C-12D-35 Features High Flow/ High Pressure: Up to 40 gpm / 5000 psi working pressure*.

More information

Solenoid Operated Directional Valves

Solenoid Operated Directional Valves INDUSTRIAL FLUID POWER COMPONENTS AND SYSTEMS SERIES 35 Solenoid Operated Directional Valves SD-2B-115A-35 SDS-2H-12D-35 S-2B-115A-35 Features High Flow/ High Pressure: Up to 25 gpm / 5000 psi working

More information

Pilot Operated 2 Port Solenoid Valve for Dry Air

Pilot Operated 2 Port Solenoid Valve for Dry Air Pilot Operated Port Solenoid Valve for Dry Air Series VQ0/30 Compact and lightweight with large flow capacity [Option] VQ0 Weight (g) 46 80 C [dm 3 /(s bar)].5 (C8) 3.0 (C) Series Series VQ0 VCH VDW VQ

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves

Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves Fluid Control Products A Constant Flow Of Ideas 2 Way General Purpose Solenoid Valves T A B L E O F C O N T E N T S Series General Description Pipe Body Material Page 8030 Low Pressure 3/8" - 3/" Brass

More information

% ^ ) 1.4 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

% ^ ) 1.4 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power 4.4 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NPT / 3/ Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased ambient

More information

Ball Valves 2-Way Series

Ball Valves 2-Way Series Ball Valves 2-Way Series Pressures to 20,000 psi (1379 bar) Parker Autoclave Engineers high-pressure ball valves have been designed to provide superior quality for maximum performance within a variety

More information

SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4

SPOOL & SLEEVE VALVES solenoid air operated monostable / bistable function threaded ports G 1/8-G 1/4 SPOO & SV VAVS monostable / bistable function threaded ports -G 1/ 5/-5/3 Series 1 FATURS Reliability: steel spool & sleeve technology with long service life Robust valve design, particularly recommended

More information

SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function

SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function Document No. 155-751 SKP15U.. Description Only when assembled to Series VGU Gas valves SKP15 electro-hydraulic actuators combine with

More information

HYDAC Compact Power Units CA

HYDAC Compact Power Units CA 1007 HYDAC Compact Power Units CA Up to 250 bar Up to 12.6 l/min Suitable for: Short-term operation S2 Intermittent operation S3 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL For short-term operation S2 or intermittent

More information

SBM TECHNOLOGY PET Blow Valve Block

SBM TECHNOLOGY PET Blow Valve Block Advanced high pressure seal technology Robust, compact & lightweight design Proven & reliable technology Maintenance & service friendly High flow rate exhaust function Minimal dead space volume (< 35ml)

More information

Proportional pressure relief valve

Proportional pressure relief valve Proportional pressure relief valve RE 29161/07.05 1/10 Type DBETX Nominal size 6 Unit series 1X Maximum working pressure P 315 bar, T 250 bar Nominal flow rate Q nom 1 l/min List of contents Contents Page

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

3 Port Solenoid Valve

3 Port Solenoid Valve Port Solenoid Valve Series V00 Rubber Seal Power consumption 0. W (with power saving circuit) VV0 VV00 V00 -V F VS temperature rises: C (with power saving circuit) Sonic conductance Series Standard Large

More information

AVID F791N NAMUR Solenoid Valve

AVID F791N NAMUR Solenoid Valve robust, pilot operated solenoid valve for direct mounting to Keystone and Premiir / MRP pneumatic actuators Features ompact design with standardized market proven NMR mounting interface. Electromagnetic

More information

-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890

-10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 G1/4 6,5 8,5 890 CL/CM UNIVERSAL Valves G1/8 - CHARACTERISTICS -10 +45 C 50 μm filtered air, with or without lubrication spool 10 bar G/18 6,5 8,5 890 1480 die-cast zamak (G1/8), aluminium () NBR aluminium AA series/u1-u,5

More information

Valve systems Base plates, according to standard ISO 5599-1. Brochure

Valve systems Base plates, according to standard ISO 5599-1. Brochure ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure

More information

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations

Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................

More information

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES 2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:

More information

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT

AXIAL PISTON PUMPS VARIABLE DISPLACEMENT FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits with housing and distributor cover in aluminium. The displacement is continuously variable by means

More information

24011 series, 3/2 Direct solenoid actuated poppet valve

24011 series, 3/2 Direct solenoid actuated poppet valve 0 series, / > > Port size: / (ISO G or NPT), NAMUR Interface > > Main application: Single and double acting actuators > > TÜV-approval based on type examination DGRL 97//EC and IEC 68, multichannel up

More information

2/2-way Solenoid Valve with servo diaphragm

2/2-way Solenoid Valve with servo diaphragm 2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive also with emergency manual override Media separated Circuit function can be modified (NC NO) Adjustable

More information

Soft Start-up Valve Series AV2000/3000/4000/5000

Soft Start-up Valve Series AV2000/3000/4000/5000 Soft Start-up Valve Series AV//4/ AV Start-up valve for low speed air supply to gradually raise initial pressure in an air system and for quick exhaust by cutting off air supply. Large effective area (mm

More information

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits

Check Valves. Pilot Operated Check Valves. Vickers. PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series. Typical Section. Features and Benefits Vickers Check Valves Pilot Operated Check Valves PCGV-6/8, 10 Series; PCG5V-6/8, 20 Series Typical Section Typical PCG5V model with internally drained pilot piston internal leakage through the closed pilot

More information

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits.

Pressure Relief. Pressure Relief and Sequence Valves CG2V-6/8, 10 Series; CG5V-6/8, 20 Series. Vickers. Features and Benefits. Vickers Pressure Relief Pressure Relief and Sequence Valves CG2V-6/8, 1 Series; CG5V-6/8, 2 Series Typical Section CG2V-6*W-1 relief valve Basic Characteristics Maximum pressure.......... 35 bar (5 psi)

More information

PROPORTIONAL PRESSURE CONTROL VALVES AND SYSTEMS.

PROPORTIONAL PRESSURE CONTROL VALVES AND SYSTEMS. PROPORTIONAL PRESSURE CONTROL VALVES AND SYSTEMS www.elwood.com 9 0 0 1 : 2 0 0 0 C E R T I F I E D C O M P A N Y Proportional Pressure Control Valves The Elwood Proportional Pressure Control Valves are

More information

Coreless Spin-on Filters

Coreless Spin-on Filters The Smart Alternative to Spin-on Cans! Features: Parker engineers have developed an innovative alternative to the age old spin-on style can. This new design provides all of the benefits of high efficiency,

More information

Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback

Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback Proportional pressure relief valve, pilot operated, with on-board electronics (OBE) and position feedback RE 29163/07.05 1/12 Type DBEBE10Z Nominal size 10 Unit series 1X Maximum working pressure A, B,

More information

3/2 Solenoid Cartridge Valve, Size 6

3/2 Solenoid Cartridge Valve, Size 6 / Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting

More information

3/2-way Mini Solenoid Valve

3/2-way Mini Solenoid Valve 3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug

More information

Solenoid Valve, Plastic

Solenoid Valve, Plastic Solenoid Valve, Plastic Construction The EMÜ directly controlled 2/2-way plastic solenoid valve has a high performance coil which is hermetically separated from the medium by means of a flexible PTFE bush.

More information

Load-sensing control block in mono and sandwich plate design

Load-sensing control block in mono and sandwich plate design Load-sensing control block in mono and sandwich plate design RE 64276/08.2010 Replaces: 08.2008 1/64 Type M4-12 Nominal size 12 Unit series 2X Nominal pressure 350 bar (pump side) Nominal pressure 420

More information

High Pressure Solenoid Valves

High Pressure Solenoid Valves High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids

More information

VSO MAX HP High Flow Proportional Valve

VSO MAX HP High Flow Proportional Valve VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties

More information

Valves. Sub-Base Mounted Valves to ISO 5599/2

Valves. Sub-Base Mounted Valves to ISO 5599/2 Valves Sub-Base Mounted Valves to ISO 5599/2 General Information ISO 1, ISO 2 and ISO 3 valve series incorporate the famous Numatics lapped spool and sleeve for ultimate service life. Due to the great

More information

Hi-Cyclic. 2, 3 and 4-Way Directional Control Valves for Pneumatic and Hydraulic Service

Hi-Cyclic. 2, 3 and 4-Way Directional Control Valves for Pneumatic and Hydraulic Service Catalog LX-325 Hi-Cyclic 2, 3 and 4-Way Directional Control Valves for Pneumatic and Hydraulic Service FEATURES: Manual, Pilot, Solenoid or Mechanical Operators Two and three position models Many types

More information

Pilot-operated Check Valves ERVE. up to 350 bar up to 300 l/min. Cartridge valves E / Connection housings

Pilot-operated Check Valves ERVE. up to 350 bar up to 300 l/min. Cartridge valves E / Connection housings Pilot-operated Check Valves ERVE up to 350 bar up to 300 l/min Cartridge valves Connection housings 1. DESCRIPTION 1.1. GENERAL In accordance with DIN-ISO 1219, HYDAC pilot-operated check valves, type

More information

Dual Modular Safety Shutoff Valves with Proof of Closure. DMV-D/622 Series DMV-DLE/622 Series

Dual Modular Safety Shutoff Valves with Proof of Closure. DMV-D/622 Series DMV-DLE/622 Series Dual Modular Safety Shutoff Valves with Proof of Closure DMV-D/622 Series DMV-DLE/622 Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof of closure. Each

More information

STC 2P Series Solenoid Valves

STC 2P Series Solenoid Valves STC 2P160-250 Series Solenoid Valves 2P160-250 Series Solenoid Valve Specifications Valve Model 2P160-1/2 2P200-3/4 2P250-1 Valve Type Action 2 Way, Normally Closed (NC) Direct Lift Diaphragm, Uni-Directional

More information

3/2-way pneumatic cartridge solenoid valve

3/2-way pneumatic cartridge solenoid valve 3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as

More information

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653)

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) SPECIFICATIONS AND PARTS Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) Serial Codes GDV and GDL Read and understand all of the instructions and safety information in this manual before

More information

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY

Republic/Manatrol Hydraulic and Pneumatic Control Valves. Catalog HY /US FOR POSITION ONLY Republic/Manatrol Hydraulic and Pneumatic Control Valves Catalog HY14-3000/US FOR POSITION ONLY Republic/Manatrol Valves Hydraulic and Pneumatic Controls WARNING FAILUR OR IMPROPR SLCTION OR IMPROPR US

More information

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics.

Check Valves. Pilot Operated Check Valves 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Vickers. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve

Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its

More information

p max 350 bar Q max 80 l/min

p max 350 bar Q max 80 l/min 83 230/215 ED DSE3J DIRECTIONAL VALVE WITH PROPORTIONAL CONTROL FEEDBACK AND INTEGRATED ELECTRONICS SUBPLATE MOUNTING ISO 4401-03 (CETOP 03) p max 350 bar Q max 80 l/min MOUNTING INTERFACE OPERATING PRINCIPLE

More information

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51 83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE

More information