Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Fluid Control Products. A Constant Flow Of Ideas. 2 Way General Purpose Solenoid Valves"

Transcription

1 Fluid Control Products A Constant Flow Of Ideas 2 Way General Purpose Solenoid Valves

2 T A B L E O F C O N T E N T S Series General Description Pipe Body Material Page 8030 Low Pressure 3/8" - 3/" Brass and Stainless Steel 1 800/8215 High Flow Gas/ High Air Valves 8210 General Service 3/8" - 2 1/2" 3/8" - 3" Aluminum 5 Brass and Stainless Steel 8221 Slow Closing 3/8" - 2 1/2" Brass High Pressure 1/" - 3/" 8225/8280 Sub-Miniature 1/8" Brass and Stainless Steel Brass and Stainless Steel Dispensing/Bib Connection 1/" Plastic /8263 General Service Compact 1/8" - 3/8" Brass and Stainless Steel 27 These solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. Two Types of Operations Apply: Normally Closed Fluid is shut off when the coil is de-energized, flows through the valve when the coil is energized. Normally Open Fluid flows through the valve when the coil is de-energized, shuts off when the coil is energized. Two Types of Constructions Apply: Direct Acting When the solenoid is energized, the core directly opens the orifice of a Normally Closed valve or closes the orifice in a Normally Open valve. The valve will operate at pressures from 0 psi to its rated maximum. The force needed to open the valve is proportional to the orifice size and fluid pressure. As orifice size increases, so does the required force. To open larger orifices without increasing solenoid size, internal pilots are used. Internally Piloted These valves use line pressure to assist operation. When the coil is de-energized (on a Normally Closed valve), the pilot orifice is closed and line pressure is applied to the top of the piston or diaphragm through the bleed orifice, closing the valve. When the coil is energized, the core opens the pilot orifice, relieving pressure from the diaphragm or piston. Line pressure, alone, opens the valve by lifting the diaphragm or piston off the main orifice. See Engineering Section for further details. Standard and Optional Features: Solenoid valves are supplied, as listed, with either Red-Hat II molded epoxy solenoids or Red-Hat solenoids with metal enclosures. Red-Hat II valves are identified by the letter G or H in their catalog numbers; e.g., 8030G16. Many optional features may be added to your valves; e.g., high-temperature Class H molded coils, manual operators, and metering devices. 2 Way/2 Position Valves Flow Diagrams Normally Closed Valve De-Energized Normally Closed Valve Energized Normally Open Valve De-Energized Normally Open Valve Energized

3 qwer Direct Acting Low Pressure Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 3/" NPT NC NO 2/2 SERIES 8030 Features Operate at low pressures: no minimum required; up to 15 psi maximum differential. Normally Closed or Normally Open operation. Widely used for dispensing, collating, gas shutoff, vacuum holding, and tank draining applications. Normally Open valve well suited for venting systems. Construction Valve Parts in Contact with Fluids Body Brass 30 Stainless Steel Seals and Disc Core Tube Core and Plugnut Core Spring NBR 305 Stainless Steel 30F Stainless Steel 302 Stainless Steel Shading Coil Copper Silver Stem PA (Normally Open) % ^ # ) Electrical Watt Rating and Power Consumption Solenoid Enclosures Spare Coil Part Number Standard Coil and AC General Purpose Explosionproof Class of Insulation DC Watts VA Watts Holding VA Inrush AC DC AC DC F F F F F Standard Voltages: 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz), 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages available when required. Standard: Watertight, Types 1, 2, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number.) Nominal Ambient Temperature Ranges: AC: 32 F to 125 F (0 C to 52 C) DC: 32 F to 10 F (0 C to 0 C) Approvals: CSA certified. UL listed, as indicated. FM approved (Normally Closed only except 8030G17 and 8030G67). Meets applicable CE directives. 1

4 8030 Specifications (English units) Operating Pressure Differential (psi) Max. AC Max. DC Pipe (ins.) Orifice (ins.) Cv Flow Factor Min. Air- Inert Gas Water Air- Inert Gas Water AC DC NORMALLY CLOSED (Closed when de-energized) Max. Fluid Temp. F Brass Body Stainless Steel Body Catalog Number Ref. No. UL 2 Listing Catalog Number Ref. No. UL 2 Listing Insulation 1 3/8 3/ G G /F 10.6/F 3/8 3/ G G /F 11.6/F 1/2 7/ G G /F - 1/2 7/ G G /F - 3/ 3/ G /F 11.6/F 3/ 3/ G /F - 3/ 5/ G /F - NORMALLY OPEN (Open when de-energized) 3/8 3/ G /F - 1/2 7/ G /F - 1/2 3/ G /F - 3/ 3/ G /F - Notes: 1 On all 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. 2 = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details. AC DC Specifications (Metric units) Operating Pressure Differential (bar) Max. AC Max. DC Air- Air- Inert Inert Gas Water Gas Water Max. Fluid Temp. C Brass Body Stainless Steel Body Insulation 1 Pipe (ins.) Orifice (mm) Kv Flow Factor (m3/h) Min. AC DC Catalog Number Ref. No. UL 2 Listing Catalog Number Ref. No. UL 2 Listing AC DC NORMALLY CLOSED (Closed when de-energized) 3/ G G /F 10.6/F 3/ G G /F 11.6/F 1/ G G /F - 1/ G G /F - 3/ G /F 11.6/F 3/ G /F - 3/ G /F - NORMALLY OPEN (Open when de-energized) 3/ G /F - 1/ G /F - 1/ G /F - 3/ G /F - Notes: 1 On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. 2 = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details. 2

5 8030 Dimensions: inches (mm) Ref. No. H K L P W 1 ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm IMPORTANT: Valves may be mounted in any position, except for 8030G3 DC. Refs. 1, 2, 3 Refs. 7, 8 3

6 8030 Dimensions: inches (mm) Refs. 9, 10 Refs. 11, 12, 13

7 qwer Direct Acting or Piloted Aluminum Body Solenoid Valves 3/8" to 3" NPT NC NO NC NO 2/2 SERIES Features Lightweight, low-cost valves for air service. Ideal for low pressure applications. Provides high flow, Cv up to 138 (Kv 118). Air and vacuum service. Construction Valve Parts in Contact with Fluids Body Aluminum Seals, Diaphragms, Disc NBR Disc-Holder PA (10.1 and 11.6 watt Normally Open only) Core Guide CA Core Tube 305 Stainless Steel Rider Rings PTFE Core and Plugnut 30F Stainless Steel Springs 302 Stainless Steel Shading Coil Copper % ^ # ) Electrical Watt Rating and Power Consumption Spare Coil Part No. Standard AC Coil and Class of DC VA VA General Purpose Explosionproof Insulation Watts Watts Holding Inrush AC DC AC DC F F B F F Standard Voltages: 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz), 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages available when required. Solenoid Enclosures Standard: Red-Hat II - Watertight, Types 1, 2, 3, 3S,, and X; Red-Hat - Type I. Optional: Red-Hat II - Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9; Red-Hat - Explosionproof and Raintight, Types 3, 7, and 9. (Except EF8215A0 and EF8215A90, which are suitable for Types 3 and 7 (C and D) only and have a T2B temperature rating code.) To order, add prefix EF to catalog number. Nominal Ambient Temperature Ranges: Red-Hat II/ Red-Hat AC: 32 F to 125 F (0 C to 52 C) Red-Hat II DC: 32 F to 10 F (0 C to 0 C) Red-Hat DC: 32 F to 77 F (0 C to 25 C) (10 F/0 C occasionally) Approvals: 8215 CSA certified. UL listed, as indicated. FM approved (Normally Closed only, except Catalog Numbers 8215A90 and 8215A0). Red-Hat II meets applicable CE directives. 5

8 Specifications (English units) Pipe (ins.) Orifice (ins.) Cv Flow Factor Operating Pressure Differential (psi) Min. Max. AC Air-Fuel Gas Max. DC Max. Fluid Temp. F Air-Fuel Gas AC DC Catalog Number Aluminum Body Ref. No Insulation ➁ UL ➄ Listing AC DC NORMALLY CLOSED (Closed when de-energized) 1/8 5/ H /F - 1/ 5/ H /F - 3/8 5/ H /F - 3/8 3/ G /F 11.6/F 3/8 3/ G1 ➀ 1 6.1/F 11.6/F 1/2 3/ G22 13A 10.1/F - 1/2 3/ G /F 11.6/F 1/2 3/ G2 ➀ 1 6.1/F 11.6/F 3/ 3/ G23 13B 10.1/F - 3/ 3/ G /F 11.6/F 3/ 3/ G3 ➀ 3 6.1/F 11.6/F 1 1 5/ B50 ➂ 6 15./F 1.9/B 1 1/ 1 5/ B60 ➂ 6 15./F 1.9/B 1 1/2 1 5/ B70 ➂ 6 15./F 1.9/B 2 2 3/ B80 ➂ 7 15./F 1.9/B 2 1/ A /F A /F - NORMALLY OPEN (Open when de-energized) Notes: 3/8 3/ G /F 11.6/F 1/2 3/ G /F 11.6/F 3/ 3/ G /F 11.6/F 1 1 5/ C /F 1.9/B 1 1/ 1 5/ C /F 1.9/B 1 1/2 1 5/ C /F 1.9/B 2 2 3/ C /F 1.9/B 2 1/ B93 ➃ /F - ➀ Do not use for Fuel Gas. ➁ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. ➂ FM Approved Process Control Valves. See Engineering Section (Approvals) for details. ➃ Type 1 enclosure only. ➄ = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details. 6

9 Specifications (Metric units) Pipe (ins.) Orifice (mm) Kv Flow Factor (m3/h) Operating Pressure Differential (bar) Min. Max. AC Air-Fuel Gas Max. DC Max. Fluid Temp. C Air-Fuel Gas AC DC Catalog Number Aluminum Body Ref. No Insulation ➁ UL ➄ Listing AC DC NORMALLY CLOSED (Closed when de-energized) 1/ H /F - 1/ H /F - 3/ H /F - 3/ G /F 11.6/F 3/ G1 ➀ 1 6.1/F 11.6/F 1/ G22 13A 10.1/F - 1/ G /F 11.6/F 1/ G2 ➀ 1 6.1/F 11.6/F 3/ G23 13B 10.1/F - 3/ G /F 11.6/F 3/ G3 ➀ 3 6.1/F 11.6/F B50 ➂ 6 15./F 1.9/B 1 1/ B60 ➂ 6 15./F 1.9/B 1 1/ B70 ➂ 6 15./F 1.9/B B80 ➂ 7 15./F 1.9/B 2 1/ A /F A /F - NORMALLY OPEN (Open when de-energized) 3/ G /F 11.6/F 1/ G /F 11.6/F 3/ G /F 11.6/F C /F 1.9/B 1 1/ C /F 1.9/B 1 1/ C /F 1.9/B C /F 1.9/B 2 1/ B93 ➃ /F - Notes: ➀ Do not use for Fuel Gas. ➁ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. ➂ FM Approved Process Control Valves. See Engineering Section (Approvals) for details. ➃ Type 1 enclosure only. ➄ = Safety Shutoff Valve; = General Purpose Valve. Refer to Engineering Section (Approvals) for details. 7

10 Dimensions: inches (mm) Ref. No. H K L P W 1 ins mm ins mm ins mm ins mm ➀ ins. 6.8 x mm 17 x ➀ ins. 7.7 x mm 190 x ➀ ins x mm 260 x ins mm ins mm ins mm ins. 6.8 x mm 17 x ins. 6.8 x mm 17 x A ins mm B ins mm ➁ ins. 7. x mm 189 x ➁ ins x mm 260 x IMPORTANT: Valves may be mounted in any position except all DC constructions and those marked ➀, which must be mounted with the solenoid vertical and upright. Constructions marked ➁ must be mounted with the solenoid vertical and upright or horizontal only. Refs. 1-, 9, 10, 13a, 13b Refs. 6, 7, 8, Refs. 11 8

11 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES 8210 Features Wide range of pressure ratings, sizes, and resilient materials provide long service life and low internal leakage. High Flow Valves for liquid, corrosive, and air/inert gas service. Industrial applications include: - Car wash - Laundry equipment - Air compressors - Industrial water control - Pumps Construction Valve Parts in Contact with Fluids % ) Body Brass 30 Stainless Steel Seals and Discs Disc-Holder Core Tube Core and Plugnut Springs NBR or PTFE PA 305 Stainless Steel 30F Stainless Steel 302 Stainless Steel Shading Coil Copper Silver Electrical Watt Rating and Power Consumption Spare Coil Part Number Standard Coil and AC General Purpose Explosionproof Class of Insulation DC Watts Watts VA Holding VA Inrush AC DC AC DC F F F F F F H F Standard Voltages: 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz). 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages available when required. Solenoid Enclosures Standard: Red-Hat II - Watertight, Types 1, 2, 3, 3S,, and X; Red-Hat - Type I. Optional: Red-Hat II - Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9; Red-Hat - Explosionproof and Watertight, Types 3,, X, 7, and 9. (To order, add prefix EF to catalog number, except Catalog Numbers 8210B57, 8210B58, and 8210B59. Valves not available with Explosionproof enclosures.) Nominal Ambient Temperature Ranges: Red-Hat II/ Red-Hat AC: 32 F to 125 F (0 C to 52 C) Red-Hat II DC: 32 F to 10 F (0 C to 0 C) Red-Hat DC: 32 F to 77 F (0 C to 25 C) (10 F/0 C occasionally) Approvals: CSA certified. Red-Hat II meets applicable CE directives. 9

12 8210 Specifications (English units) Operating Pressure Differential (psi) Max. AC Max. DC Pipe Orifice Cv Flow Air- Inert Light 300 Air- Inert Light 300 (ins.) (ins.) Factor Min. Gas Water SSU Gas Water NORMALLY CLOSED (Closed when de-energized), NBR or PTFE ➁ Seating 10 Max. Fluid Temp. F Brass Body Stainless Steel Body Catalog Ref. UL ➄ Catalog Ref. Number No. ➃ Listing Number No. ➃ SSU AC DC Insulation ➆ UL ➄ Listing AC DC 3/8 3/8 1.5 ➀ G73 ➂ 1P 8210G36 ➂ 1P 6.1/F 11.6/F 3/8 5/ G93 5D /F 11.6/F 3/8 5/ G1 6D /F 11.6/F 3/8 5/ G6 5D /F - 1/2 7/ ➀ G15 ➂ 2P 8210G37 ➂ 2P 6.1/F 11.6/F 1/2 5/ G9 5D /F 11.6/F 1/2 5/ G87 7D 17.1/F 11.6/F 1/2 5/ G2 6D /F 11.6/F 1/2 5/ G7 5D /F - 1/2 5/ G227 5D /F 0.6/H 3/ 5/ G88 7D 17.1/F 11.6/F 3/ 3/ G9 9D /F 11.6/F 3/ 3/ G95 8D /F 11.6/F 3/ 3/ G3 11D /F 11.6/F 3/ 3/ B26 ➁ 10P /H 3/ 3/ G26 ➁ 0P F B5 31D D89 15D /H G5 1D 8210G89 5D 16.1/F G 12D /F 11.6/F G27 2P /F G78 3P /F - 1 1/ 1 1/ B55 32D /H 1 1/ 1 1/ G55 3D /F - 1 1/ 1 1/ G8 16D /F 11.6/F 1 1/2 1 1/ B56 33D /H 1 1/2 1 1/ G56 D /F - 1 1/2 1 1/ G22 18D /F 11.6/F 2 1 3/ G100 20P /F 11.6/F 2 1/2 1 3/ G101 21P /F 11.6/F NORMALLY OPEN (Open when de-energized), NBR Seating (PA Disc-Holder, except as noted) 3/8 5/ G33 23D /F 11.6/F 3/8 5/ G11 ➇ ➈ 39D /F 11.6/F 1/2 5/ G3 23D /F 11.6/F 1/2 5/ G30 37D 10.1/F 11.6/F 1/2 5/ G12 ➇ ➈ 39D /F 11.6/F 3/ 3/ G35 25D /F 11.6/F 3/ 5/ G38 38D 10.1/F 11.6/F 3/ 3/ C13 2D /F 3/ 3/ G13 6D /F B57 ➅ ➉ 3D /F D1 26D /F G1 7D /F - 1 1/ 1 1/ B58 ➅ ➉ 35D /F - 1 1/ 1 1/ D18 28D /F 1 1/ 1 1/ G18 8D /F - 1 1/2 1 1/ B59 ➅ ➉ 36D /F - 1 1/2 1 1/ D32 29D /F 1 1/2 1 1/ G32 9D /F / P /F 2 1 3/ G103 50P /F - 2 1/2 1 3/ P /F 2 1/2 1 3/ G10 51P /F - Notes: ➀ 5 psi on Air; 1 psi on Water. ➁ Valve provided with PTFE main disc. ➂ Valve includes UItem (G.E. trademark) piston. ➃ Letter "D" denotes diaphragm construction; "P" denotes piston construction. ➄ Safety Shutoff Valve; General Purpose Valve. Refer to Engineering Section (Approvals) for details. ➅ Valves not available with Explosionproof enclosures. ➆ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. ➇ AC construction also has PA seating. ➈ No disc-holder. ➉ Stainless Steel disc-holder. Must have solenoid mounted vertical and upright.

13 8210 Specifications (Metric units) Operating Pressure Differential (bar) Max. AC Max. DC Pipe Orifice Kv Flow Factor Air- Inert Light 300 Air- Inert Light 300 (ins.) (mm) (m3/h) Min. Gas Water SSU Gas Water NORMALLY CLOSED (Closed when de-energized), NBR or PTFE ➁ Seating Max.Fluid Temp. C Brass Body Stainless Steel Body Ref. UL ➄ Catalog Ref. No. ➃ Listing Number No. ➃ SSU AC DC Catalog Number Insulation ➆ UL ➄ Listing AC DC 3/ ➀ G73 ➂ 1P 8210G36 ➂ 1P 6.1/F 11.6/F 3/ G93 5D /F 11.6/F 3/ G1 6D /F 11.6/F 3/ G6 5D /F - 1/ ➀ G15 ➂ 2P 8210G37 ➂ 2P 6.1/F 11.6/F 1/ G9 5D /F 11.6/F 1/ G87 7D 17.1/F 11.6/F 1/ G2 6D /F 11.6/F 1/ G7 5D /F - 1/ G227 5D /F 0.6F 3/ G88 7D 17.1/F 11.6/F 3/ G9 9D /F 11.6/F 3/ G95 8D /F 11.6/F 3/ G3 11D /F 11.6/F 3/ B26 ➁ 10P /H 3/ G26 ➁ 0P F B5 31D D89 15D /H G5 1D 8210G89 5D 16.1/F G 12D /F 11.6/F G27 2P /F G78 3P /F - 1 1/ B55 32D /H 1 1/ G55 3D /F - 1 1/ G8 16D /F 11.6/F 1 1/ B56 33D /H 1 1/ G56 D /F - 1 1/ G22 18D /F 11.6/F G100 20P /F 11.6/F 2 1/ G101 21P /F 11.6/F NORMALLY OPEN (Open when de-energized), NBR Seating (PA Disc-Holder, except as noted) 3/ G33 23D /F 11.6/F 3/ G11 ➇ ➈ 39D /F 11.6/F 1/ G3 23D /F 11.6/F 1/ G30 37D 10.1/F 11.6/F 1/ G12 ➇ ➈ 39D /F 11.6/F 3/ G35 25D /F 11.6/F 3/ G38 38D 10.1/F 11.6/F 3/ C13 2D /F 3/ G13 6D /F B57 ➅ ➉ 3D /F D1 26D /F G1 7D /F - 1 1/ B58 ➅ ➉ 35D /F - 1 1/ D18 28D /F 1 1/ G18 8D /F - 1 1/ B59 ➅ ➉ 36D /F - 1 1/ D32 29D /F 1 1/ G32 9D /F P /F G103 50P /F - 2 1/ P /F 2 1/ G10 51P /F - Notes: ➀ 0.3 bar on Air; 0.0 bar on Water. ➁ Valve provided with PTFE main disc. ➂ Valve includes UItem (G.E. trademark) piston. ➃ Letter "D" denotes diaphragm construction; "P" denotes piston construction. ➄ Safety Shutoff Valve; General Purpose Valve. ➅ Valves not available with Explosionproof enclosures. ➆ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. ➇ AC construction also has PA seating. ➈ No disc-holder. ➉ Stainless Steel disc-holder. Refer to Engineering Section (Approvals) for details. Must have solenoid mounted vertical and upright. 11

14 8210 Dimensions: inches (mm) Ref. No. H K L P W 1* ins mm * ins mm ins mm ins mm * ins mm ins mm ins mm * ins mm *➀ ins X mm 133 X * ins mm * ins. 5.3 X mm 136 X * ins mm * ins mm ins mm ins X mm 129 X ins mm ins X mm 166 X ins X mm 209 X ins X mm 166 X ins X mm 179 X ➀ Valves must be mounted with solenoid vertical and upright. * DC dimensions slightly larger. Refs. 1, 2 Ref. 3 W P K L Refs. 5-9, 11, 20, 21, 23, 25, 37,38 H 12

15 8210 Dimensions: inches (mm) 30 ins X mm 209 X ins X mm 133 X ins X mm 15 X ins X mm 15 X ins X mm 176 X ins. 7.3 X mm 186 X ins X mm 1.95 X ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm IMPORTANT: Valves may be mounted in any position, except as noted in specifications table. Refs. 10, 15, 2, Refs. 12, 16, 18 P K H W L Note: Valve must be mounted with solenoid vertical and upright. 13

16 8210 Dimensions: inches (mm) Refs. 39 Refs

17 qwer Pilot Operated Slow Closing Solenoid Valves Brass Body 3/8" to 2 1/2" NPT NC NO 2/2 SERIES 8221 Features Pilot Operated, Normally Open or Normally Closed. Snubber slows disc closing speed to protect system against water hammer damage more effectively than other techniques. Pressure spike due to water hammer reduced to a point eliminating the need for suppressors or other controls in most water systems. Fluid Controls Institute Inc. evaluations have classified these valves: Pipe s FCI-82-1 Class 3 / 8, 1 / 2, 3 / CC 1, 1 1 /, 1 1 / 2, 2, 2 1 / 2 BB % ^ ) Construction Valve Parts in Contact with Fluids Body Disc Seals Core Tube Core and Plugnut Springs Piston Shading Coil Brass NBR PTFE & NBR 305 Stainless Steel 30F Stainless Steel 302 Stainless Steel Stainless Steel or Brass Copper Electrical Standard Coil and Class of Insulation Watt Rating and Power Consumption Solenoid Enclosures Spare Coil Part No. AC General Purpose Explosionproof DC Watts Watts VA Holding VA Inrush AC DC AC DC F F F Standard Voltages: 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz). 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages are available when required. Standard: Red-Hat II - Watertight, Types 1, 2, 3, 3S,, and X; Red-Hat - Type I. Optional: Red-Hat II - Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9; Red-Hat - Explosionproof and Raintight, Types 3, 7, and 9. (To order, add prefix EF to catalog number.) Nominal Ambient Temperature Ranges: Red-Hat II/ Red-Hat AC: 32 F to 125 F (0 C to 52 C) Red-Hat II DC: 32 F to 10 F (0 C to 0 C) Red-Hat DC: 32 F to 77 F (0 C to 25 C) (10 F/0 C occasionally) Approvals: CSA certified. UL listed, General Purpose Valves. Red-Hat II meets applicable CE directives. 15

18 8221 Specifications (English units) Operating Pressure Differential (psi) Max. AC Max. DC Maximum Fluid Temp. F Brass Body Insulation ➂ Pipe (ins.) Orifice (ins.) Cv Flow Factor Min. ➀ Water ➁ Water ➁ AC DC Catalog Number Ref. No. AC DC NORMALLY CLOSED (Closed when de-energized) 3/8 9/ G /F 11.6/F 1/2 9/ G /F 11.6/F 3/ 3/ G /F 11.6/F G /F 11.6/F 1 1/ 1 1/ G /F 11.6/F 1 1/2 1 1/ G /F 11.6/F 2 1 3/ G /F 22.6/F 2 1/2 1 3/ G /F 22.6/F NORMALLY OPEN (Open when de-energized) 3/8 9/ /F 3/8 9/ G /F - 1/2 9/ /F 1/2 9/ G /F - 3/ 3/ /F 3/ 3/ G /F /F G /F - 1 1/ 1 1/ /F 1 1/ 1 1/ G /F - 1 1/2 1 1/ /F 1 1/2 1 1/ G /F / /F 2 1 3/ G /F - 2 1/2 1 3/ /F 2 1/2 1 3/ G /F Notes: ➀ Valves require a 5 psi Minimum Pressure Differential to open. Once open, they remain open with 3 psi differential pressure. ➁ Refer to Steam/Hot Water Valve Series for Hot Water constructions. ➂ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. 16

19 8221 Specifications (Metric units) Operating Pressure Differential (bar) Max. AC Max. DC Maximum Fluid Temp. C Brass Body Insulation ➂ Pipe (ins.) Orifice (mm) Kv Flow Factor (m3/h) Min. ➀ Water ➁ Water ➁ AC DC Catalog Number Ref. No. AC DC NORMALLY CLOSED (Closed when de-energized) 3/ G /F 11.6/F 1/ G /F 11.6/F 3/ G /F 11.6/F G /F 11.6/F 1 1/ G /F 11.6/F 1 1/ G /F 11.6/F G /F 22.6/F 2 1/ G /F 22.6/F NORMALLY OPEN (Open when de-energized) 3/ /F 3/ G /F - 1/ /F 1/ G /F - 3/ /F 3/ G /F /F G /F - 1 1/ /F 1 1/ G /F - 1 1/ /F 1 1/ G /F /F G /F - 2 1/ /F 2 1/ G /F - Notes: ➀ Valves require a 0.3 bar Minimum Pressure Differential to open. Once open, they remain open with 0.2 bar differential pressure. ➁ Refer to Steam/Hot Water Valve Series for Hot Water constructions. ➂ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. 17

20 8221 Dimensions: inches (mm) Ref. No. H K L P W 1 ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins mm ins X mm 133 X ins. 5.1 X mm 137 X ins X mm 166 X ins. 6.7 X mm 16 X ins X mm 179 X ins X mm 209 X ins X mm 209 X IMPORTANT: Valves may be mounted in any position. Refs. 1, 2 Refs. 3, Refs. 5, 6, 7, 11, 12 Refs. 15, 16 Refs. 8, 9, 10, 13, 1 Refs

21 qwer Pilot Operated High Pressure Solenoid Valves Brass or Stainless Steel Bodies 1/" to 3/" NPT NC 2/2 SERIES 8223 Features Rugged piston construction built to withstand pressure ratings of 50 to 1500 psi. Angle body design for high flows. Ideal for high pressure water applications, such as car washes. Mountable in any position. % ) Construction Valve Parts in Contact with Fluids Body Brass 300 Stainless Steel Seals and Disc NBR, PA, PTFE PTFE, NBR Core Tube Core and Plugnut 305 Stainless Steel 30F Stainless Steel Core Spring 302 Stainless Steel Shading Coil Copper Silver Stem PA (Normally Open) Electrical Watt Rating and Power Consumption Spare Coil Part Number Standard Coil and Class of Insulation DC Watts Watts Solenoid Enclosures AC General Purpose Explosionproof VA Holding VA Inrush AC DC AC DC F F Standard Voltages: 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz). 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages available when required. Standard: Watertight, Types 1, 2, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number.) Nominal Ambient Temperature Ranges: AC: 32 F to 125 F (0 C to 52 C) DC: 32 F to 10 F (0 C to 0 C) Approvals: Brass Version CSA certified. Meets applicable CE directives. 19

22 8223 Specifications (English units) Operating Pressure Differential (psi) Max. AC Max. DC Maximum Fluid Temp. F Brass Body Stainless Steel Body Insulation Pipe (ins.) Orifice (ins.) Cv Flow Factor Min. Air- Inert Gas Water Light 300 SSU Air- Inert Gas Water Light 300 SSU AC DC Catalog Number Ref. No. Catalog Number Ref. No. AC DC NORMALLY CLOSED (Closed when de-energized) 1/ 5/ G /F - 1/ 5/ G /F 22.6/F 3/8 5/ G /F 22.6/F 3/8 5/ G /F 22.6/F 1/2 3/ G G /F 22.6/F 3/ 3/ G G /F 22.6/F Specifications (Metric units) Operating Pressure Differential (bar) Max. AC Max. DC Maximum Fluid Temp. C Brass Body Stainless Steel Body Insulation Pipe Orifice Kv Flow Air- Light Oil Air- Light Oil Factor Catalog Catalog (ins.) (mm) (m3/h) Min. Gas Water SSU Gas Water SSU AC DC Number Ref. No. Number Ref. No. AC DC NORMALLY CLOSED (Closed when de-energized) 1/ G /F - 1/ G /F 22.6/F 3/ G /F 22.6/F 3/ G /F 22.6/F 1/ G G /F 22.6/F 3/ G G /F 22.6/F Dimensions: inches (mm) H K L P W Ref. No. 1 ins mm ins mm ins mm ins mm ins mm Refs

23 Direct Acting Sub-Miniature Solenoid Valves Brass, Stainless Steel or Aluminum Bodies 1/8" NPT NC 2/2 SERIES Features Economical, Normally Closed valves for a wide range of OEM applications. Convertable from AC to DC by changing the molded epoxy open frame coil. Individual valves handle mildly aggressive fluids. Group mounted valves (max. 10 valves) have aluminum bodies and built-in manual operators for air service. Mountable in any position. % ^ ) Construction Valve Parts in Contact with Fluids Body Individual Valves Brass Stainless Steel Group Mounted Aluminum Seals and Discs NBR or FKM Core and Plugnut 30F Stainless Steel Core Springs 302 Stainless Steel Shading Coil Copper Electrical Standard Coil and Class of Insulation Solenoid DC Watts Watt Rating and Power Consumption Watts Standard: Molded epoxy open frame solenoid can be converted from AC to DC by simply changing the coil. Optional: 3x DIN 62 coil; 1/2 Threaded Conduit Hub. AC Spare Coil Part Number VA Holding VA Inrush AC DC F Standard Voltages: 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC 50 Hz). 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages available when required. Nominal Ambient Temperature Ranges: AC: 32 F to 135 F (0 C to 57 C) DC: 32 F to 77 F (0 C to 25 C) Approvals: CSA certified. UL Recognized Component. Meets applicable CE directives. 21

24 Specifications (English units) Operating Pressure Differential (psi) Max. Open Frame Solenoid Pipe Orifice Max. AC Max. DC Fluid Brass Body Stainless Steel Body Temp. F Insulation Cv Flow Air-Inert Light Air-Inert Light (ins.) (ins.) Factor Gas Water 300 SSU Gas Water 300 SSU AC DC Catalog Number Catalog Number AC DC NORMALLY CLOSED (Closed when de-energized), FKM Disc 1/8 3/ U8225B1V U8225B5V 6.3/F 6.9/F 1/8 1/ U8225B2V U8225B6V 6.3/F 6.9/F 1/8 3/ U8225B3V U8225B7V 6.3/F 6.9/F 1/8 1/ U8225BV U8225B8V 6.3/F 6.9/F Operating Pressure Differential (psi) Max. Open Frame Solenoid Pipe Orifice Max. AC Max. DC Fluid Operator Only Sub-Base Construction Cv Flow Temp. F Insulation (ins.) (ins.) Factor Air-Inert Gas Air-Inert Gas AC DC Catalog Number Catalog Number AC DC GROUP MOUNTING -NORMALLY CLOSED (Closed when de-energized), Aluminum Body, NBR Disc 1/8 3/ U8280B1 U8280B2 6.3/F 6.9/F Specifications (Metric units) Operating Pressure Differential (bar) Max. Fluid Open Frame Solenoid Pipe Orifice Kv Flow Max. AC Max DC Temp. C Brass Body Stainless Steel Body Insulation (ins.) (mm) Factor (m3/h) Air-Inert Gas Water Light 300 SSU Air-Inert Gas Water Light 300 SSU AC DC Catalog Number Catalog Number AC DC NORMALLY CLOSED (Closed when de-energized), FKM Disc 1/ U8225B1V U8225B5V 6.3/F 6.9/F 1/ U8225B2V U8225B6V 6.3/F 6.9/F 1/ U8225B3V U8225B7V 6.3/F 6.9/F 1/ U8225BV U8225B8V 6.3/F 6.9/F Max. Operating Pressure Differential (bar) Open Frame Solenoid Fluid Pipe Orifice Kv Flow Max. AC Max. DC Temp C Operator Only Sub-Base Construction Insulation Factor (ins.) (mm) (m3/h) Air-Inert Gas Air-Inert Gas AC DC Catalog Number Catalog Number AC DC GROUP MOUNTING - NORMALLY CLOSED (Closed when de-energized), Aluminum Body, NBR Disc 1/ U8280B1 U8280B2 6.3/F 6.9/F Dimensions: inches (mm) 8225 Series 8280 Series 22

25 qwer Direct Acting Plastic Body Solenoid Valves Hose Bib, Compression Connection or 1/" Male Flare NC 2/2 SERIES 8260 Features Corrosion resistent plastic bodies. Available with compression fitting ends for metal or plastic tube to save installation cost. Mountable in any position. Dispensing vending construction NSF listed. % & Construction Body Seals and Disc Core Tube Core and Plugnut Springs Shading Coil Valve Parts in Contact with Fluids CA, PA, PP NBR 305 Stainless Steel 30F Stainless Steel 302 Stainless Steel Copper ) Electrical Watt Rating and Power Consumption AC Spare Coil Part Number General Purpose Standard Coil and Class of Insulation DC Watts Watts VA Holding VA Inrush AC DC B F Standard Voltages: 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz). 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages available when required. Nominal Ambient Temperature Range: AC: 32 F to 125 F (0 C to 52 C) DC: 32 F to 10 F (0 C to 0 C) Solenoid Enclosures Standard: Watertight, Types 1, 2, 3, 3S,, and X. Optional: Open Frame Solenoid, Junction Box enclosures. Approvals: CSA certified. UL Recognized Component. Meets applicable CE directives. 23

26 8260 Specifications (English units) Orifice (ins.) Cv Flow Factor Specifications (Metric units) Operating Pressure Differential (psi) Max. AC Max. DC Max. Fluid Temp. F Plastic Body Insulation ➁ Pipe Connections Air-Inert Gas Water Air-Inert Gas Water AC DC Catalog Number Ref. No. AC DC GENERAL SERVICE CONSTRUCTION - CA Body, Watertight enclosure with leads 1/" Male Flare 9/ G /F 10.6/F Bib for 1/" I.D. Tube 9/ G /F 10.6/F 1/" O.D. ➀ Compression 9/ G /F 10.6/F GENERAL SERVICE CONSTRUCTION - PP Body, Open Frame Solenoid and Spade Terminal Coils 1/" O.D. ➀ Compression 1/ USM /B 6./B 3/ USM /B 6./B 1/ USM /B 6./B 5/ USM /B 6./B DISPENSING VENDING CONSTRUCTION - NSF Listed - PP Body, Open Frame Solenoid and Spade Terminal Coils 1/" O.D. ➀ Compression 1/ USM /B 6./B 3/ USM /B 6./B 1/ USM /B 6./B 5/ USM /B 6./B DISPENSING VENDING CONSTRUCTION - NSF Listed - PA Body, Open Frame Solenoid and Spade Terminal Coils 3/8" O.D. ➀ Compression 5/ USM /B - PA Body, Open Frame Solenoid and Spade Terminal Coils 3/8" O.D. ➀ Compression 5/ USM /B - Notes: ➀ Fittings not supplied with valve. To order, refer to List Price Schedule. Kit No plastic tubing, and Kit No metal tubing. ➁ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. Pipe Connections Orifice (mm) Kv Flow Factor (m3/h) Operating Pressure Differential (bar) Max. AC Max. DC Max. Fluid Temp. C Air-Inert Gas Water Air-Inert Gas Water AC DC GENERAL SERVICE CONSTRUCTION - CA Body, Watertight enclosure with leads Plastic Body Catalog Number Insulation ➁ Ref. No. AC DC 1/" Male Flare G /F 10.6/F Bib for 1/" I.D. Tube G /F 10.6/F 1/" O.D. ➀ Compression G /F 10.6/F GENERAL SERVICE CONSTRUCTION - PP Body, Open Frame Solenoid and Spade Terminal Coils "1/" O.D. ➀ Compression USM /B 6./B USM /B 6./B USM /B 6./B USM /B 6./B DISPENSING VENDING CONSTRUCTION - NSF Listed - PP Body, Open Frame Solenoid and Spade Terminal Coils 1/" O.D. ➀ Compression USM /B 6./B USM /B 6./B USM /B 6./B USM /B 6./B DISPENSING VENDING CONSTRUCTION - NSF Listed - PA Body, Open Frame Solenoid and Spade Terminal Coils 3/8" O.D. ➀ Compression USM /B - PA Body, Open Frame Solenoid and Spade Terminal Coils 3/8" O.D. ➀ Compression USM /B - Notes: ➀ Fittings not supplied with valve. To order, refer to List Price Schedule. Kit No plastic tubing, and Kit No metal tubing. ➁ On 50 hertz service, the watt rating for the 6.1/F solenoid is 8.1 watts. 2

27 8260 Dimensions: inches (mm) Refs. 1 Refs. 2 Refs. 3 25

28 8260 Dimensions: inches (mm) Refs. 1.31(3.33) 0.8 (20.6) 0.3 (9.5) 1 WIDE x 1 2 THICK TERMINALS 0.98 (25.0) 1.97 (50.0) 0.33 (8.3).13 (3.6) DIA. HOLES x 0.31 (7.9) DEEP, (2) MOUNTING HOLES UNF-2A THREAD (BOTH ENDS) IC.666 (16.9) 1.5 (38.1) 1.88 (7.6) 1.28 (32.5) (NOTE 1).333 (8.).200 (5.0).75 (12.1).170 (.3) DIA. HOLE (2 PLACES) FLOW 2 (50.8) 1 (25.) A. C. CONSTRUCTION SHOWN 0.1 (10.3) (REF) 1 0. (11.1) HEXAGON (BOTH ENDS) 1 16 ORIFICE SIZE SHOWN 0.03 (0.79) 1.15 (29.) 0.9 (22.2) Refs (3.33) 0.8 (20.6) 0.3 (9.5) (6) (0.8) 1 WIDE x 1 2 THICK TERMINALS 0.98 (25.0) 1.97 (50.0) 0.33 (8.3).13 (3.6) DIA. HOLES x 0.31 (7.9) DEEP, (2) MOUNTING HOLES UNF-2A THREAD (BOTH ENDS) 1.5 (38.1) 1.88 (7.6) 1.28 (32.5) (NOTE 1) IC.666 (16.9).333 (8.).200 (5.0).75 (12.1).170 (.3) DIA. HOLE (2 PLACES) FLOW 2 (50.8) 1 (25.) A. C. CONSTRUCTION SHOWN 0.1 (10.3) (REF) 1 0. (11.1) HEXAGON (BOTH ENDS) 1 16 ORIFICE SIZE SHOWN 0.03 (0.79) 1.15 (29.) 0.9 (22.2) 1.31 (33.3) (20.6) (9.53) (6) (0.8) 1 WIDE x 1 2 THICK TERMINALS Refs. 6 (8.3) (27.8) 0. (11.1) (15.1) (7.5) (76) (17.5) BODY SHOWN ONLY (8.7) (Ø 8.7) FLOW 2.3 (62) 1.21 (30.7) (16) UN-2A THREAD (BOTH ENDS) 1 (25.) 2 (51) 2 MOUNTING HOLES 11/32 DEEP, FOR NO. 10 THREADS CUTTING SCREW 26

29 qwer Direct Acting General Service Solenoid Valves Brass or Stainless Steel Bodies 1/8" to 3/8" NPT NC NO 2/2 SERIES Features Reliable, proven design with high flows. Small poppet valves for tight shutoff. Wide range of elastomers for specialty service. Mountable in any position. Brass body construction for general atmospheres; Stainless Steel for corrosive atmospheres. Construction Valve Parts in Contact with Fluids Body Brass 303/30 Stainless Steel Seals and Discs NBR or Cast UR % ^ # ) Core Tube Core and Plugnut Springs 305 Stainless Steel 30F Stainless Steel 302 Stainless Steel Shading Coil Copper Silver Stem PA (Normally Open) Note: All 1/8" NPT Normally Open valves contain CA. All 1/" NPT Normally Open valves contain PA. Electrical Watt Rating and Power Consumption Spare Coil Part No. Standard Coil and AC General Purpose Explosionproof Class of Insulation DC Watts Watts VA Holding VA Inrush AC DC AC DC F F F Standard Voltages 2, 120, 20, 80 volts AC, 60 Hz (or 110, 220 volts AC, 50 Hz). 6, 12, 2, 120, 20 volts DC. Must be specified when ordering. Other voltages available when required Nominal Ambient Temperature Ranges: AC: 32 F to 125 F (0 C to 52 C) DC: 32 F to 10 F (0 C to 0 C) Solenoid Enclosures Standard: Watertight, Types 1, 2, 3, 3S,, and X. Optional: Explosionproof and Watertight, Types 3, 3S,, X, 6, 6P, 7, and 9. (To order, add prefix EF to catalog number) Approvals: CSA certified. UL listed, as indicated. Normally Closed Valves FM approved. Meets applicable CE directives. 27

30 Specifications (English units) Operating Pressure Differential (psi) Max. AC Max. DC Max. Fluid Temp. F Brass Body Stainless Steel Body Insulation ➁ Pipe (ins.) Orifice (ins.) Cv Flow Factor Air- Inert Gas Water Lt. 300 SSU Air- Inert Gas Water Lt. 300 SSU AC DC Catalog Number Ref. No. UL ➂ Listing Catalog Number Ref. No. UL ➂ Listing AC DC NORMALLY CLOSED (Closed when de-energized), NBR Disc 1/8 3/ G G /F 10.6/F 1/8 3/ G G /F 10.6/F 1/8 1/ G G /F 10.6/F 1/ 3/ G G /F 10.6/F 1/ 3/ G /F 11.6/F 1/ 3/ G /F - 1/ 3/ G G /F 10.6/F 1/ 1/ G G /F 10.6/F 1/ 1/ G /F 11.6/F 1/ 5/ G G /F 11.6/F 1/ 7/ G G /F 11.6/F 1/ 7/ G G /F 10.6/F 1/ 9/ G /F 11.6/F 1/ 9/ G G /F 22.6/F 1/ 9/ G G /F 10.6/F 3/8 1/ G G /F 10.6/F 3/8 5/ G G /F 11.6/F 3/8 7/ G G /F 11.6/F 3/8 9/ G G /F - NORMALLY OPEN (Open when de-energized), NBR Disc (except where noted) 1/8 1/ G G /F 10.6/F 1/8 3/ G G /F 10.6/F 1/8 1/ G G /F 10.6/F 1/ 3/ G260 ➀ G130 ➀ /F 11.6/F 1/ 3/ G261 ➀ G13 ➀ /F 11.6/F 1/ 1/ G G /F 11.6/F 1/ 5/ G G /F 11.6/F 1/ 7/ G G /F 11.6/F 1/ 9/ G G /F 11.6/F Notes: ➀ Cast UR disc supplied as standard. ➁ On 50 hertz service, the rating for the 6.1/F solenoid is 8.1 watts. ➂ Safety Shutoff Valve; General Purpose Valve. Refer to Engineering Section (Approvals) for details. 28

4 Posiflow Proportional Solenoid Valves

4 Posiflow Proportional Solenoid Valves 4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,

More information

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4 to 1 NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power .55 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and.55 W low wattage coil Standard

More information

Four-Way Valves. Accessories TABLE OF. Rotary and Smart. Actuator Motors

Four-Way Valves. Accessories TABLE OF. Rotary and Smart. Actuator Motors TABLE OF CONTENTS 389 We stock more than 2,000 different ASCO solenoid valves, repair kits, and replacement coils. What we don t stock, we can usually get from the factory within 5 working days! As the

More information

Assisted lift operated 2/2-way solenoid valves Type EV250B

Assisted lift operated 2/2-way solenoid valves Type EV250B MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way

More information

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES 2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:

More information

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223

3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 3 WAY (3/2) POPPET VALVES FOR AIR AND VACUUM SERVICE SOLENOID OR AIR ACTUATED BROCHURE N-223 HERION S HIGH PERFORMANCE POPPET VALVES For those applications requiring high Cv, fast response times, large

More information

3/2-way Solenoid Valve, direct-acting, NC or NO

3/2-way Solenoid Valve, direct-acting, NC or NO 3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined

More information

Solenoid valves 2/2-way direct-operated Type EV210A

Solenoid valves 2/2-way direct-operated Type EV210A Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral

More information

4 Nuclear Catalog. Nuclear Products Qualified to IEEE Specifications. Solenoid Valves. Check Valves. Pressure & Temperature Switches

4 Nuclear Catalog. Nuclear Products Qualified to IEEE Specifications. Solenoid Valves. Check Valves. Pressure & Temperature Switches 4 Nuclear Catalog Nuclear Products Qualified to IEEE Specifications Solenoid Valves Check Valves Pressure & Temperature Switches Hydramotor Actuators www.ascovalve.com Index Engineering Information 2-8

More information

Solenoid valves Type EVU

Solenoid valves Type EVU Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot

More information

Valve Proving System VPS 504 Series S06 (120 VAC) Series S05 (24 VDC)

Valve Proving System VPS 504 Series S06 (120 VAC) Series S05 (24 VDC) Valve Proving System VPS 504 Series S06 (120 VAC) Series S05 (24 VDC) VPS 504 S06 (120 VAC) is: CSA Certified File # 1637485 CSA Requirement No. 4-01 (USA) Technical Information Letter R-15 (Canada) UL

More information

4 Dynamic Solutions. Leadership and Innovation in Valve Products and Valve Systems

4 Dynamic Solutions. Leadership and Innovation in Valve Products and Valve Systems Dynamic Solutions Leadership and Innovation in Valve Products and Valve Systems At ASCO, Valve Performance Begins and Ends With People 4 First of all, it begins with the people we serve. It is from them

More information

Coil Classification: Class F standard, Class H available Class B standard on V9xx models

Coil Classification: Class F standard, Class H available Class B standard on V9xx models Direct Acting & Pilot Operated Valves 1/8" - 1/2" General Description: Direct Acting and Pilot Operated valves are used in applications for actuation of double acting cylinders and piloting of larger control

More information

BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features

BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features Booster Pump Control Valve Quick Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable

More information

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm) Vickers Cartridge Valves Solenoid Valves Screw-in Cartridge Valves Maximum Pressure bar ( psi) Maximum Flow 7 l/min (6 USgpm) Rev /99 77 Introduction For over seventy years, Vickers has provided its customers

More information

WELCOME TO MAGNATROL

WELCOME TO MAGNATROL Catalog 6 BULLETIN 6-INDEX WELCOME TO MAGNATROL Process Control Solenoid Valves For Water Oil Air Gas Steam Cryogenics Vacuum Solvents Brine Oxygen Corrosive Fluids Magnatrol Valve Corp. Established 1936

More information

solenoid valves SV Series 2- and 3-way Solenoid Valves for Gas and Liquid

solenoid valves SV Series 2- and 3-way Solenoid Valves for Gas and Liquid 2- and 3-way Solenoid Valves for Gas and Liquid SV10: Vacuum to 3000 psig SV430: Vacuum to 3000 psig SV20: Vacuum to 6000 psig SV460: Vacuum to 6000 psig SV30: Vacuum to 3000 psig Circle Seal Controls

More information

Morrison Bros. Co. General Product Specifications

Morrison Bros. Co. General Product Specifications Morrison Bros. Co. General Product Specifications Tank Mounted Spillbox The spill containment device is manufactured to contain spills and drips that may occur at the fill point on aboveground storage

More information

Application Feature Valve Nominal Liquid Capacity R-22 (in tons)*

Application Feature Valve Nominal Liquid Capacity R-22 (in tons)* EMERSON CLIMATE TECHNOLOGIES-Solenoid Valves & Coils Quick Select Guide Applications Application Feature Valve Nominal Liquid Capacity R-22 (in tons)* Nominal Liquid Capacity R-410A (in tons)* Liquid Line

More information

Centro-Matic Automatic Lubrication Systems System Controls

Centro-Matic Automatic Lubrication Systems System Controls Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several different models may be chosen to control power-operated pumps, depending on the

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

Solenoid Valves and Their Importance in Refrigeration Systems. October 2007

Solenoid Valves and Their Importance in Refrigeration Systems. October 2007 Solenoid Valves and Their Importance in Refrigeration Systems October 2007 Overview Introduction Solenoid valves play an important role within refrigeration and air conditioning systems, controlling the

More information

Solenoid and Air Operated Valves. Supporting Fleet Operations for Over 60 Years

Solenoid and Air Operated Valves. Supporting Fleet Operations for Over 60 Years 4 Solenoid and Air Operated Valves Supporting Fleet Operations for Over 60 Years This catalog describes solenoid and air operated valves, representative of those manufactured by ASCO Valve, Inc. to meet

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES 2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the

More information

3/2-way Mini Solenoid Valve

3/2-way Mini Solenoid Valve 3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug

More information

Explosion-Proof Electric Unit Heaters

Explosion-Proof Electric Unit Heaters Type FX4 FX4 Explosion-Proof Electric Air Heaters FX4 heaters are UL listed and/or CSA certified for use in hazardous locations. They are designed for dry indoor industrial applications such as oil refineries,

More information

BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features

BERMAD Waterworks. Pressure Relief/Sustaining Valve. 700 Series. Model 730. Features and Benefits. Major Additional Features Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive

More information

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

More information

HENRY TECHNOLOGIES - OIL LEVEL REGULATORS (CONVENTIONAL)

HENRY TECHNOLOGIES - OIL LEVEL REGULATORS (CONVENTIONAL) HENRY TECHNOLOGIES - OIL LEVEL REGULATORS (CONVENTIONAL) The oil level regulator controls the oil level in the compressor crankcase with a float operated valve. Oil level regulators are designed to attach

More information

Single sub-base valve

Single sub-base valve solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet

More information

167D Series Switching Valves

167D Series Switching Valves June 2011 167D Series Switching Valves P1185 P1184 167D TWO-WAY SWITCHING VALVE 167DA THREE-WAY SWITCHING VALVE Figure 1. 167D Series Switching Valves Introduction The 167D Series switching valves are

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves 2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating

More information

SQUARE D INDUSTRIAL CONTROL PRODUCTS

SQUARE D INDUSTRIAL CONTROL PRODUCTS SQUARE D INDUSTRIAL CONTROL PRODUCTS CLASS 9012 3a INDUSTRIAL PRESSURE SWITCHES Type A Heavy duty switch for virtually any industrial application involving air, water, steam or oil Bellows, piston and

More information

Precision Solenoid Valves

Precision Solenoid Valves Precision Solenoid Valves Solenoid Valves for gas General Purpose Valves Specialty Solenoid Valves n Didn t see what you re looking for? Let us review your requirements and chances are we can help solve

More information

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control

More information

4/2-Way Pneumatic Solenoid Valve

4/2-Way Pneumatic Solenoid Valve 4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug

More information

Sporlan V-Series Ruby Seat Solenoid Valves

Sporlan V-Series Ruby Seat Solenoid Valves aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Sporlan V-Series Ruby Seat Solenoid Valves RACE Catalogue 30-10-8 UK,

More information

INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected)

INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) CHRONOMITE INSTANT-FLOW WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No. Wattage

More information

TABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing)

TABLE 1. Rugged cast aluminum alloy casing,celcon waterways with nichrome parts White (unless stainless steel housing) CHRONOMITE INSTANT-FLOW MICRO WATER HEATER INSTALLATION AND OPERATION INSTRUCTIONS - (LOW FLOW MODELS) (Before installation, compare electrical needed for the model of heater selected) TABLE 1 Model No.

More information

VSO MAX HP High Flow Proportional Valve

VSO MAX HP High Flow Proportional Valve VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties

More information

XE70 SERIES VC SERIES BALANCED HYDRONIC VALVES 2-WAY AND 3-WAY

XE70 SERIES VC SERIES BALANCED HYDRONIC VALVES 2-WAY AND 3-WAY XE70 SERIES VC SERIES BALANCED HYDRONIC VALVES 2-WAY AND 3-WAY PRODUCT SPECIFICATION SHEET switched off. This results in energy savings during mild weather. Normal control will resume when T3 fails to

More information

Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve

Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its

More information

Accumulators and Receivers

Accumulators and Receivers aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Accumulators and Receivers Catalog C-1, October 2007 Page 2 / Catalog

More information

STC 3S012-020-A Series Solenoid Valves

STC 3S012-020-A Series Solenoid Valves STC 3S012-020-A Series Solenoid Valves 3S012-020-A Series Solenoid Valve Specifications Valve Model 3S012-1/8-A 3S012-1/4-A 3S020-1/8-A 3S020-1/4-A Port Size (NPT) 1/8 1/4 1/8 1/4 Valve Type Action 3 Way,

More information

Digital inductive conductivity transmitter

Digital inductive conductivity transmitter Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

2.12. page 223 2.12. Products for Explosion hazardous Environment

2.12. page 223 2.12. Products for Explosion hazardous Environment 2.12 page 223 2.12 Products for Explosion hazardous Environment Non-electric valves for explosion 2.12.1 page 224 hazardous environment The following manually and mechanically actuated valves are available

More information

Thermostatic valve Type AVTA

Thermostatic valve Type AVTA MAKING MODERN LIVING POSSIBLE Data sheet Thermostatic valve Type AVTA Thermostatic valves are used for proportional regulation of flow quantity, depending on the setting and the sensor temperature. The

More information

1805 Series Relief Valves

1805 Series Relief Valves October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications

More information

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double

5 Port Pilot Operated Solenoid Valve Rubber Seal. Specifications Fluid Operating pressure range. 2 position single/3 position 2 position double For details about certified products conforming to international standards, visit us at www.smcworld.com. 5 Port Pilot Operated Solenoid Valve Rubber Seal Series VF3000 Compact and lightweight: 26.4 mm

More information

AIR LINE VALVES AND GAUGES

AIR LINE VALVES AND GAUGES AIR LINE VALVES AND GAUGES INGERSOLL-RAND AIR LINE VALVES AND GAUGES Maintaining consistent air pressure throughout the entire system is crucial for maximum performance and productivity. Ingersoll-Rand

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

Baumann 24000 Little Scotty Bronze Control Valve

Baumann 24000 Little Scotty Bronze Control Valve 24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature

More information

Electro-pneumatic control valves

Electro-pneumatic control valves Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N

More information

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00.

Inrush Apparent power (VA) Flow Characteristics/Weight. Port size Rc. Valve model VS3115-01 VS3115-02 VS3110-02 VS3110-03 VS3114-00. Port Direct Operated Solenoid Valve Series VS5/0 Metal Seal Multiple pressure supply is possible with balanced spool sleeve. Any given port can accept high or low pressure supply without affecting the

More information

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics 3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,

More information

STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting

STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting Female NPT Thread 3/8 OD Tube 3/8 Push-In Fitting 2P050 Series Solenoid Valve Specifications Valve Model 2P050-1/4 2P050-3/8

More information

MAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure

MAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure MAKING MODERN LIVING POSSIBLE Thermostatic valve AVTA Technical brochure 2 IC.PD.500.A3.02-520B3728 Danfoss A/S 07-2009/ RA-MC/mr Contents Page Features............................................................................................4

More information

relief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar)

relief valves 500 Series Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) Adjustable Popoff & Inline Relief Valves 0.5 to 150 psig (10 bar) How it Works Closed Resilient seal design prevents leakage. Sealing efficiency increase with increased pressure up to cracking pressure.

More information

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0. ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)

More information

Types 66R and 66RR Low-Pressure Relief Valves

Types 66R and 66RR Low-Pressure Relief Valves November 2009 Types 66R and 66RR Low-Pressure Relief Valves W1953 W1908 TYPE 66R RELIEF VALVE TYPE 66RR RELIEF VALVE Figure 1. Typical Constructions Introduction Types 66R and 66RR low-pressure throttling

More information

SOLENOID VALVE FOR REFRIGERATING SYSTEMS

SOLENOID VALVE FOR REFRIGERATING SYSTEMS SOLENOID VALVE FOR REFRIGERATING SYSTEMS FROM UALITY OUR NATURAL DEVELOPMENT Achieved the goal of fi fty years working in the industry of Refrigeration and Air Conditioning, Castel uality Range of Products

More information

System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8

System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8 System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures

More information

3/2- and 2/2-way cartridge valve type BVE

3/2- and 2/2-way cartridge valve type BVE 3/2- and 2/2-way cartridge valve type BVE for any flow direction, zero leakage, all ports pressure resistant Flow Q max = 70 lpm Perm. pressure p max = 400 bar Additional valves with same function: ' Type

More information

Baumann 81000 Mikroseal Control Valve

Baumann 81000 Mikroseal Control Valve Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where

More information

9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog

9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G. January. Catalog 9013 PUMPTROL Commercial Pressure Switches Type F and 9013 Commercial Pressure Switches Type G Catalog January 07 Contents Commercial Pressure Switches Pressure Switches b Selection..............................................

More information

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi

Pipe Valves, Fittings and Nipples Pressures to 15,200 psi Pipe Valves, Fittings and Nipples MAXIMATOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed by

More information

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US

*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...

More information

BERMAD Waterworks. High Pressure, Surge Anticipating Control Valve. 800 Series. Model 835-M. Features and Benefits. Major Additional Features

BERMAD Waterworks. High Pressure, Surge Anticipating Control Valve. 800 Series. Model 835-M. Features and Benefits. Major Additional Features High Pressure, Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise

More information

Scraper Passage Indicator. Electrical Indicator. Features

Scraper Passage Indicator. Electrical Indicator. Features IV Scraper Passage Indicator Bulletin No: 5110.001.03 Date: June 2008 Cross Indexing No: n/a Supersedes: 5110.001.02 (1/06) Flag Indicator Electrical Indicator Options Description TDW s IV Scraper Passage

More information

One Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty

One Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty One Year Warranty ELECTRIC Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches Fused Ceramic Shield tank lining is corrosion-resistant for years of dependability. Adjustable

More information

Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1

Rated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1 200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing

More information

BERMAD Waterworks. Surge Anticipating Control Valve. 700 Series. Model 735-M. Features and Benefits. Major Additional Features

BERMAD Waterworks. Surge Anticipating Control Valve. 700 Series. Model 735-M. Features and Benefits. Major Additional Features Surge Anticipating Control Valve Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise buildings, sewage,

More information

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY

CHEXTER TM FITS YOUR APPLICATION, PROFITABLY CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and

More information

servo-controlled 3-WaY vacuum solenoid valves WiTH

servo-controlled 3-WaY vacuum solenoid valves WiTH servo-controlled 3-WaY vacuum solenoid s WiTH low absorption electric coil The 3-way vacuum solenoid s in this series feature two positions with pneumatically pilot-operated conical shutters. They can

More information

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow

2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow 2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description

More information

ORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar

ORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16

More information

VC Series Zone Valves BALANCED 2-WAY AND 3-WAY HYDRONIC VALVES

VC Series Zone Valves BALANCED 2-WAY AND 3-WAY HYDRONIC VALVES VC Series Zone Valves BALANCED 2-WAY AND 3-WAY HYDRONIC VALVES PRODUCT DATA Design VC Series zone valves consist of: 2-way or 3-way valve housing available with various connection ends Spindle and cartridge

More information

MTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter

MTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter Thermal Mass meter and Temperature Transmitter Description The MTI10 insertion thermal mass flowmeter and the MTL10 in-line thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases

More information

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve

Standard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective

More information

3/2-way pneumatic cartridge solenoid valve

3/2-way pneumatic cartridge solenoid valve 3/2-way pneumatic cartridge solenoid valve Compact design with 11 mm width per station Orifices from 0.5 mm (9 bar) to 1.2 mm (1.5 bar) High durability and reliability Low power consumption, as well as

More information

Engineering Guide and Valve Selection Information

Engineering Guide and Valve Selection Information Engineering Guide and Valve Selection Information GC Valves Delivers Quality from the Inside Out We use only stainless steel hardware on our diaphragms. This includes the pilot orifice a wear point for

More information

RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description

RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description Worldwide Contacts www.tyco-fire.com RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description The TYCO RAPID

More information

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC 8mm Solenoid Valve Typical Applications Portable Equipment Blood Pressure Monitoring Wound Therapy Air and Oxygen Delivery Sensor Zeroing Product Specifications Mechanical Valve Type: 3-Way, Solenoid-actuated

More information

Type 3353 Angle Seat Valve

Type 3353 Angle Seat Valve Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat

More information

TABLE OF CONTENTS. SECTION 1 General Information: Pg 2 Description of Operation

TABLE OF CONTENTS. SECTION 1 General Information: Pg 2 Description of Operation GTRDD SERIES HEATLESS DRYER INSTALLATION, OPERATION & MAINTENANCE MANUAL TABLE OF CONTENTS SECTION 1 General Information: Pg 2 Description of Operation SECTION 2 Safety Instructions: Pg 3 Installation

More information

SELECTION, APPLICATION AND MAINTENANCE

SELECTION, APPLICATION AND MAINTENANCE DIESEL PROTECTION SYSTEMS Automatic Diesel Engine Shut Down System for Safe Area Applications SELECTION, APPLICATION AND MAINTENANCE Series 300 Series 310 SYSTEM DESCRIPTION Suitable for attended engine

More information

GS-General Service Control Valves

GS-General Service Control Valves GS-General Service Control Valves GS-General Service Valves The GS-General Service Valves continue Copes-Vulcan s tradition of designing and manufacturing control valves that provide both exceptional service

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function

SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function Document No. 155-751 SKP15U.. Description Only when assembled to Series VGU Gas valves SKP15 electro-hydraulic actuators combine with

More information

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve 3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for

More information

V47 Series Temperature Actuated Modulating Water Valves

V47 Series Temperature Actuated Modulating Water Valves V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate

More information

Pressure Switch for gas and air

Pressure Switch for gas and air Switch for gas and air GAO-A4 GMH-A4 GML-A4 UL Listed UL 353 File # MH 16628 CSA Certified CSA C22.2 No. LR 53222 Certification file # 201527 FM Approved Class 3510, 3530 File # J.I. 1Y919.AF Commonwealth

More information

Vacuum Control. Vacuum Applications. Vacuum Regulators. Vacuum Breakers (Relief Valves) Vacuum Control Devices. Vacuum Terminology

Vacuum Control. Vacuum Applications. Vacuum Regulators. Vacuum Breakers (Relief Valves) Vacuum Control Devices. Vacuum Terminology Vacuum Applications Vacuum regulators and breakers are widely used in process plants. Conventional regulators and relief valves might be suitable for service if applied correctly. This section provides

More information

Screw Plug Immersion Heaters

Screw Plug Immersion Heaters Immersion Heaters Overview Immersion Heaters consist of hairpin bent tubular elements brazed or welded into a screw plug and provided with terminal enclosures for electrical connections. Immersion Heaters

More information

BERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features

BERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features Pressure Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure Reducing Valve is a hydraulically operated,

More information

Air Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003

Air Conditioning & Refrigeration Master Catalog. Catalog CIC-2003-1/USA April 2003 Air Conditioning & Refrigeration Master Catalog Catalog CIC-2003-1/USA April 2003 Table of Contents Table of Contents Service Valves Frontseating Valves... page 115 RB01 Series Ball Valves... page 117

More information

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv)

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and 0.762 Cv) Order code Series and function M-05-310-HN-442 Standard coil HN at ports 2 + 4 HN at ports

More information

Residential/Commercial Gas Condensing High Efficiency Tankless Water Heaters

Residential/Commercial Gas Condensing High Efficiency Tankless Water Heaters Residential/Commercial Gas Condensing High Efficiency Tankless Water Heaters FEATURES ULTRA-LOW NOx CONDENSING TECHNOLOGY PROVIDES UNPRECEDENTED 0.95 ENERGY FACTOR DURABLE HEAT EXCHANGER Primary Heat Exchanger

More information