4 CHANNEL AMPLIFIERS CB600.4 CB CB CB CB CHANNEL AMPLIFIERS CB300.2 CB600.2 CB2700.2

Size: px
Start display at page:

Download "4 CHANNEL AMPLIFIERS CB600.4 CB CB CB CB CHANNEL AMPLIFIERS CB300.2 CB600.2 CB2700.2"

Transcription

1 4 CHANNE AMPIFIES CB6.4 CB1.4 CB15.4 CB2.4 CB CHANNE AMPIFIES CB3.2 CB6.2 CB CHANNE AMPIFIES CB15.5 CB27.5 MNBCK CASS AB 2 HM AMPIFIES CB7.1M2 CB11.1M2 MNBCK CASS D 1 HM AMPIFIES CB12.1D CB24.1D CB32.1D CB5.1D MNBCK CASS D 2 HM AMPIFIES CB24.1D2

2 FUNCTINS FUNCTINS CB6.4/CB1.4/CB15.4/CB2.4 CB15.5 / CB27.5 PW BASS BST MDE UTPUT MDE BASS BST / MDE PW P db +1dB Min Max FU PF HPF HI HI Min Max db HPF FU PF +1dB HPF FU 5Hz 4KHz MDE HPF FU Min Max HI CH5 HI Min Max P 4Hz 5Hz EMTE PF MDE 5Hz 4KHz HPF 5Hz 4KHz HPF MDE 4Hz 5Hz PF 5Hz 4KHz Min Max HI HPF MDE MDE / 15Hz 4Hz db +18dB PF BASS BST EMTE CH5 CB34.4 CB7.1M2/CB11.1M2 PW BASS BST MDE UTPUT MDE BASS BST PW INE UT INE P db +18dB Min Max HI FU PF HPF EMTE 4Hz 5Hz 5Hz 4KHz PF MDE HPF HI Min Max FU HPF PF 5Hz 4KHz HPF MDE db +18dB 4Hz 5Hz PF P MIN MAX FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE CB3.2/CB6.2 CB12.1D/CB24.1D2/CB24.1D/CB32.1D /CB5.1D PW INE UT INE PW INE UT INE IN P HI Min Max db +1dB 5Hz 4KHz FU 4Hz 5Hz MDE BASS BST HPF MDE PF EMTE HPF PF P P Min Max FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE UT CB27.2 PW INE UT INE HPF PF P HI Min Max db +18dB 5Hz 4KHz FU 4Hz 5Hz 18 MDE BASS BST HPF MDE PF EMTE Input Mode Gain control PF / HPF control Mosfet power supply 1~5 Channel Power Amplifier Sub Sonic control Bass Boost control Thermal protection ED Power and Protection Indicator ow Input and High Input Selected

3 PEATIN (-)=GUND CNNECTIN Connect the terminal to the chassis ground of your car and take care of best electric and mechanic contact. In doing so, drill a hole in to the car chassis near the amplifier then remove color, dirt or any other substance from the ground point. After that fasten the cable end with added ring terminal by using a screw. Ensure that the ground connection is as short as possible and that the cable diameter is sufficient ( min 4 mm" ). oute the ground cables from the radio and all other equipment parts. like equalizer. active crossover network or other amplifiers, to the same ground point. =PWE SUPPY Connect the terminal to the positive pole of the battery with a lead cable and add a fuse in to the power cable in a distance of not more then 3 cm from the battery. The lead cables's diameter should be at least 4 mm' for a length of 3m and 6 mm" for a length of 6m. EM(N/FF)EMTE CNT Connect the EM terminal to the automatic antenna connector of your car radio. Now when turning on and off your car radio. the amplifier automatically switches N and FF. A cable diameter of.5mm is sufficient. FUSE The amplifier is equipped with a plug-in auto fuse protecting the set against fault conditions. Do not use a fuse with a higher value and never bridge the fuse over, as this may lead to irreparability damage so that ant any claim for warranty is denied. PECAUTINS This unit is designed for negative ground 12V DC operation only. Use speakers with an impedance of 2 or 4 hms ( 2 to 4 hm when used as bridging amplifier ) Avoid installing the unit where: -It would be subject to high temperatures, such as from direct sunlight or hot air from the heater. -It would be exposed to rain or moisture. -It would be subject to dust or dirt. If your car is parked in direct sunlight and there is a considerable rise in temperature inside the car, allow the unit to cool off before operation. When installing the unit horizontally, be sure not to cover the heatsink fins with the floor carpet. If this unit is placed too close to the car radio, an interference may occur. In this case, separate the amplifier from the car radio. This power amplifier employs a protection circuit to protect the transistors and speakers if the amplifier malfunctions. Do not attempt to test the protection circuits by covering the heatsink or connecting improper loads. Do not use the unit with a weak auto battery as its optimum performance depends on a normal battery supply voltage. For safety reasons, keep the volume of your car audio system moderate so that you can still hear normal traffic sounds outside your car. TUBE SHTING No Function: The connection cable is not connected correctly ( = terminal BATT/ /EM). Ensure that all connections and mechanic contact and that the jacket has been removed. The fuse is defective-pay attention to the correct value of a new fuse! No Sound: Speaker cable or speaker plug are not connected correctly. No Sound /ed ED Protection Shines: The plus and minus wires of the speaker cable have contact, thus eliminate the short circuit. If you use a 2 hm speaker in stereo mode, a 4 hm speaker in bridge mode or tri-mode and the set is overloaded, then turn the gain control to "min " until the operation is free of trouble. Poor Sound Quality ( Distortions ): The speakers are overloaded, therefore turn down the volume level and check the volume control positions. No Stereo Sound And A Weak Bass: Speaker cables (+) and (-) are mixed up, unit wired out of phase. FUSE EPACEMENT If the fuse blows, check the power connection and replace the f use. If the fuse blows again after replacement, there may be an internal malfunction. In this case, consult your dealer. WANING: Use the specified amperage fuse. Use of a higher amperage fuse may cause serious damage. PTECTIN CICUIT: This amplifier is provided with a protection circuit which operates in the following cases when: the unit is overheated. the speaker terminals are short circuited.

4 STEE MDE STEE MDE CB6.4/CB1.4/CB15.4/CB2.4 CB3.2/CB6.2 PW INE UT INE PW BASS BST MDE UTPUT MDE BASS BST P HI Min Max db +1dB 5Hz MDE BASS BST HPF MDE PF EMTE 4KHz HPF FU PF 4Hz 5Hz P db +1dB Min Max FU PF HPF HI HI Min Max HPF FU PF db +1dB 4Hz 5Hz EMTE PF MDE 5Hz 4KHz HPF 5Hz 4KHz HPF MDE 4Hz 5Hz PF CA STEE CA STEE CB27.2 CB34.4 PW INE UT INE PW BASS BST MDE UTPUT MDE BASS BST HPF PF P HI Min Max db +18dB 5Hz 4KHz FU 4Hz 5Hz 18 MDE BASS BST HPF MDE PF EMTE P db +18dB Min Max FU PF HPF HI HI Min Max FU HPF PF db +18dB EMTE 4Hz 5Hz PF MDE 5Hz 4KHz HPF 5Hz 4KHz HPF MDE 4Hz 5Hz PF CA STEE CA STEE

5 STEE MDE STEE MDE CB15.5/27.5 CB7.1M2/CB11.1M2 PW INE UT INE / MDE PW P MIN MAX FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE 5Hz 4KHz HPF FU MDE HPF FU Min Max HI CH5 HI Min Max P 5Hz 4KHz Min Max HI HPF MDE MDE / 15Hz 4Hz db +18dB PF BASS BST EMTE CH5 CA STEE CH5 CA STEE CB12.1D/CB24.1D2/CB24.1D/CB32.1D/5.1D PW INE UT INE IN Input Mode Gain control PF / HPF control Mosfet power supply 1~5 Channel Power Amplifier emote control Bass Boost control Thermal protection ED Power and Protection Indicator ow Input P P Min Max FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE UT CA STEE

6 S CNNECTINS S CNNECTINS CB15.4/CB2.4 Ch3 2~4hm Ch4 2~4hm Ch1 2~4hm Ch2 2~4hm CB6.4/CB1.4 Ch1 2~4hm Ch2 2~4hm Ch3 2~4hm Ch4 2~4hm EM PWE UTPUT EM PWE UTPUT Ch1 2~4hm Ch2 2~4hm Ch3 2~4hm Ch4 2~4hm CB34.4 EM PWE UTPUT CB3.2 EFT 2~4hm IGHT 2~4hm UTPUT EM PWE FUSE EFT IGHT 3A CB6.4:3Ax2 CB1.4:35Ax2 CB15.4:3Ax3 CB2.4:35Ax3 CB34.4:15A

7 S CNNECTINS S CNNECTINS CB6.2 CB15.5 EFT 2~4hm IGHT 2~4hm EFT IGHT EM UTPUT 3A X 2 PWE CB15.5:1A CB27.2 CB27.5 2~4hm 2~4hm EM CH5 EM EFT IGHT UTPUT PWE MIN 1 UTPUT UTPUT PWE CB27.2:15A CB27.5:15A

8 S CNNECTINS S CNNECTINS CB7.1M2 CB12.1D MN 1~4hm MN 2~4hm + + EM EM UTPUT MIN 1 3A X 3 PWE UTPUT MIN 2 25A X 2 PWE CB24.1D MN 1~4hm + EM CB11.1M2 UTPUT MN 2~4hm MIN 1 3A X 4 PWE + CB32.1D MN 1~4hm EM + UTPUT EM MIN 2 3A X 3 PWE UTPUT MIN 1 3A X 5 PWE

9 S CNNECTINS MDE CB5.1D CB6.4/CB1.4 MN 2~4hm MN 4~8hm + EM UTPUT UTPUT EM PWE PWE CB5.1D:25A MN 4~8hm CB6.4:3Ax2 CB1.4:35Ax2 CB24.1D2 CB15.4/CB2.4 MN 4~8hm MN 2~4hm + EM UTPUT EM PWE UTPUT MIN 2 3A X 4 PWE CB15.4:3Ax3 CB2.4:35Ax3 MN 4~8hm

10 MDE MDE CB34.4 MN 4~8hm CB27.2 MN 4~8hm EM EFT IGHT EM UTPUT PWE UTPUT PWE CB34.4:15A MN 4~8hm CB27.2:15A CB3.2 MN 4~8hm MN 4~8hm CB15.5 EFT IGHT FUSE EM UTPUT 3A PWE CB15.5:1A MN 4~8hm CB6.2 MN 4~8hm CB27.5 MN 4~8hm EM CH5 EFT IGHT EM PWE MIN 1 UTPUT UTPUT UTPUT 3A X 2 PWE CB27.5:15A MN 4~8hm

11 S CNNECTINS AT CB12.1D/CB24.1D/CB32.1D AMP 1 S CNNECTINS AT CB12.1D/CB24.1D/CB32.1D AMP 1 MASTE EM PW INE UT INE IN UTPUT P P Min Max FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE MIN 1 3A X 5 PWE UT CB12.1D:3Ax3 CB24.1D:3Ax4 CB32.1D:3Ax5 To a metal part of car 2~8hm BATTEY DC 12V CA STEE AMP 2 CB12.1D:3Ax3 CB24.1D:3Ax4 CB32.1D:3Ax5 AMP 2 SAVE EM PW INE UT INE IN P P Min Max FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE UTPUT MIN 1 3A X 5 PWE UT

12 S CNNECTINS AT S CNNECTINS AT CB5.1D AMP 1 MASTE CB5.1D AMP 1 PW INE UT INE SUB SNIC PF BASS BST EMTE IN EM P Min Max FF 25Hz 18 15Hz 4Hz db +18dB UTPUT UT PWE CB5.1D:25A To a metal part of car BATTEY DC 12V 4~8hm CA STEE AMP 2 SAVE AMP 2 PW INE UT INE SUB SNIC PF BASS BST EMTE IN EM P Min Max FF 25Hz 18 15Hz 4Hz db +18dB UTPUT UT PWE CB5.1D:25A

13 S CNNECTINS AT CB24.1D2 AMP 1 S CNNECTINS AT CB24.1D2 AMP 1 MASTE EM PW INE UT INE IN UTPUT P P Min Max FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE MIN 2 3A X 4 PWE UT To a metal part of car 4~8hm BATTEY DC 12V CA STEE AMP 2 AMP 2 SAVE EM PW INE UT INE IN UTPUT P P Min Max FF 25Hz SUB SNIC 18 15Hz 4Hz db +18dB PF BASS BST EMTE MIN 2 3A X 4 PWE UT

14 PWE CNNECTIN EADS HEAD UNIT ( ) EMTE UT FUSE + PWE EM BATTEY DC 12V NTES N THE PWE SUPPY : Connect the power input lead only after all other leads have been connected. Be sure to connect the ground wire of the unit securely to a metal part of the car. A lose connection may cause a malfunction of the amplifier. EM: The unit is turned on by applying +12 Volts to this terminal. This terminal does not draw heavy current like the Power Terminals so a thinner connecting wire is acceptable. Standard 18 GAUGE is fine and the standard color is yellow.lf the radio is equipped with a Power Antenna control wire, it can drive this terminal. If the Power Antenna wire is already in use, you can still splice into it. With this method, the unit will turn on automatically with the radio. Use the power supply lead with a fuse attached whose value is the same as original fuse. Place the fuse in the power supply lead as close as possible to the car battery. During a full power operation, maximum current will run through the system Therefore, make sure that the leads to be connected to the and terminals of the unit respectively must be larger than 1-Gauge ( AWG.1). to a metal part of car WIING INSTUCTINS PWE CNNECTIN The battery terminal () must be connected directly to the positive terminal of the vehicle battery to provide an adequate voltage source and minimize noise. Connecting the battery terminal lead to any other point (such as the fuse block ) will reduce the power output and may cause noise and distortion. Use only #1 gauge or thicker (smaller gauge #) wire for this lead and connect it to the terminal of the battery after all other wiring is completed. GUND CNNECTIN The ground terminal () connection is also critical to the correct operation of the amplifier. Use a wire of the same gauge as the power connection (#1 or thicker)and connect it between the ground terminal ( ) of the amplifier and a metal part of the vehicle close to the mounting location. This wire should be as short as possible and any paint or rust at the grounding point should be scraped away to provide a clean metal surface to which the end of the ground wire can be screwed or bolted. EMTE TUN-N CNNECTIN The amplifier is turned on by applying to the remote turn-on terminal (EM). The wire lead to this terminal should be connected to the "Auto-Antenna" lead from the car stereo which will provide the only when the car stereo is turned on. If the car stereo does not provide an Auto-Antenna" lead, the remote turn-on lead may be wired to an "Accessory " or "adio "terminal in the car's fuse block. This will turn the amplifier on and off with the ignition key, regardless of whether the car stereo is on or off. The remote turn-on lead does not carry large currents. So #2 gauge wire may be used for this application. CNNECTINS Depending on the type and number of speakers used with the amplifier, wire them to the speaker terminals as per the appropriate wiring diagram. For most applications #18gauge wire should be used for the speaker leads but in no case thinner than #2 gauge. For leads in excess of 1 feet # 16 gauge is recommended. When wiring the speakers, pay careful attention to the polarity of the terminals on the speakers and make certain they correspond to the polarity of the c- orresponding terminals on the amplifier. Do not ground any speaker leads to the chassis of the vehicle. CNNECTINS This amplifier features low-level input capability. If the car stereo does not provide low-level outputs, the amplifier may be connec -ted via the speaker (high-level) outputs from the stereo with a AUTCAFT line converter.

15 PEATIN After the amplifier has been installed and all connections have been made careful -lyand securely, turn the radio on so that the amplifier is switched on automatically. After a short power-on period, the amplifier reaches its full performance. Now turn up the volume slowly using the volume control of the radio. If there is no sound or only a distorted replay, switch off the radio immediately, the amplifier will also switch off automatically, and check if all connections have been made correctly. PWE=ED PWE INDICAT After the orderly connection of the three power terminals, the ED indicator shines green and goes out with off. PTECT =ED PTECTIN INDICAT This set is equipped with an overload protection, immediately upon overloading due to short circuit or much increased temperature the overload protection is activated and the red ED indicator is shining. Through this the amplifier is protected against damage. In case of the thermal protection a certain short cooling time must be allowed after which the amplifier automatically resumes operation. EVE CNT The input level control allows the system to work well within a wide range of output level. Choose the adjustment in the way that you achieve a sound most possibly without any distortion. as a guideline the following procedure is recommended: If you use several amplifier, the adjustment has to be made for each set separately, tune up the volume of your car radio to 2/3 of the maximum volume. Now turn the gain control of the amplifier from " Min " to " Max " direction until you can hear distortions. Then turn the level control a little back to " Min ". The gain control adjustment is finished now. Attention! If you use 2 hm speakers in stereo mode. Tri-mode or 4 hm speakers in bridge mode and the overload protection is triggered, turn the gain control to " Min " direction, until the operation is free of trouble. HIGH PASS AND W PASS CNTS This amplifier has high pass and low pass controls for making good sound combination. INTEFEENCE All cables are sources of interference. The power cable and CA audio cable are very prone to interference; the remote cables are less prone. There is often interference caused by the generator (piping), ignition ( cracking ) or other car electronic parts. Most of these problems can be eliminated by correct and careful cabling. In doing so, these are the following guidelines : Use only a screened audio cable for the wiring between " low level in " of the amplifier and CA or DIN output of the radio. ay the signal, speaker and power cables separately with enough distance from one another and also from each other car cable. lf not possible, you can lay the circuit and ground cable together with the serial cables. Audio and speaker cable should be as far away from these as possible. The EM cable to the automatic antenna output of the radio can be laid together with the signal cables. Avoid ground loops by laying the ground wiring of all components to a center point in a star-like way. You can find the best central point in measuring the voltage directly at the battery. Now compare this voltage value with the chosen ground point and the (+) terminal of the amplifier. lf the measured voltage in only less different you've found the correct central.therwise you have to look for another point. You should measure with the ignition being switched on and additionally switched on other electronics ( rear window heating and light ). If there are pickups from external electrical sources into the speaker cables, divide the core leads and twist them together. If there are noises from the car electronics. Add an interference suppression choke to the power wiring. If there are huming noises, use thicker ground cables or add further ground cables to the chassis. To reduce contact resistance and bad and loose contacts, please tin the cable ends or use multi core cable ends, spade terminals or others. Gold Plated spade terminal are free of corrosion and have the lowest contact resistance. Should all these measures to without any success. the use of a ground loop isolator may solve the problem.

16 SPECIFICATIN SPECIFICATIN FU CHANNE FU CHANNE PWE DESCIPTIN CB6.4 CB1.4 PWE DESCIPTIN CB15.4 CB2.4 CB34.4 MS 4 hm Stereo 14.4V 6 X 4 8 X 4 MS 4 hm Stereo 14.4V 115 X 4 15 X X 4 MS 2 hm Stereo 14.4V 8 X 4 12 X 4 MS 2 hm Stereo 14.4V 185 X 4 25 X X 4 MS 4 hm Bridge 14.4V 16 X 2 24 X 2 MS 4 hm Bridge 14.4V 375 X 2 5 X 2 85 X 2 Watts Nominal 6 1 Watts Nominal Max Music Power Watts 12 2 Max Music Power Watts Frequency esponse 1Hz~36KHz(-3dB) 1Hz~36KHz(-3dB) Frequency esponse 1Hz~36KHz(-3dB) 1Hz~36KHz(-3dB) 1Hz~36KHz(-3dB) Signal Noise atio Signal Noise atio Input Impedance 22K hm 22K hm Input Impedance 22K hm 22K hm 22K hm Input Sensitivity 25mV~5V 25mV~5V Input Sensitivity 25mV~5V 25mV~5V 25mV~5V T.H.D. T.H.D. Hi Pass Freq. 5Hz-4KHz 5Hz-4KHz Hi Pass Freq. 5Hz-4KHz 5Hz-4KHz 5Hz-4KHz ow Pass Freq. 4Hz-5Hz 4Hz-5Hz ow Pass Freq. 4Hz-5Hz 4Hz-5Hz 4Hz-5Hz Bass Boost ~+1dB ~+1dB Bass Boost ~+1dB ~+1dB ~+18dB Supply Voltage Supply Voltage Dimensions(mm) 354x19x5 374x19x5 Dimensions(mm) 414x19x5 514x19x5 558x25x55 TW CHANNE PWE DESCIPTIN CB3.2 CB6.2 CB27.2 MS 4 hm Stereo 14.4V 6 X 2 11 X 2 45 X 2 MS 2 hm Stereo 14.4V 8 X 2 16 X X 2 MS 4 hm Bridge 14.4V Watts Nominal 3 6 Max Music Power Watts 6 12 Frequency esponse 1Hz~36KHz(-3dB) 1Hz~36KHz(-3dB) Signal Noise atio Input Impedance 22K hm 22K hm Input Sensitivity 25mV~5V 25mV~5V T.H.D. Hi Pass Freq. 5Hz-4KHz 5Hz-4KHz ow Pass Freq. 4Hz-5Hz 4Hz-5Hz Bass Boost ~+1dB ~+1dB Supply Voltage Dimensions(mm) 274x19x5 334x19x Hz~36KHz(-3dB) 22K hm 25mV~5V 5Hz-4KHz 4Hz-5Hz ~+18dB 558x25x55

17 SPECIFICATIN SPECIFICATIN PWE DESCIPTIN MS 4 hm Stereo 14.4V MS 2 hm Stereo 14.4V MS 4 hm Bridge 14.4V Frequency esponse Signal Noise atio Input Impedance Input Sensitivity T.H.D. Hi pass Freq. MS 4 hm MS 2 hm MS 1 hm Class D Section Watts Nominal Total Amplifier Watts Nominal Max Music Power Watts Frequency esponse Signal Noise atio Input Impedance Input Sensitivity T.H.D. ow pass Freq. Bass Boost Supply Voltage Dimensions(mm) FIVE CHANNE CB X4 1 X 4 2 X 2 1Hz~36KHz(-3dB) 22K hm 25mV~5V 5Hz-4KHz Hz~4Hz(-3dB) 22K hm 15mV~5V 15Hz-4Hz ~+18dB 474x19x5 CB X4 16 X 4 32 X 2 1Hz~36KHz(-3dB) 22K hm 25mV~5V 5Hz-4KHz Hz~4Hz(-3dB) 22K hm 15mV~5V 15Hz-4Hz ~+18dB 58x25x55 PWE DESCIPTIN MS 4 hm MS 2 hm MS 1 hm Watts Nominal Max Music Power Watts Frequency esponse Signal Noise atio Input Impedance Input Sensitivity T.H.D. Subsonic ow Pass Freq. Bass Boost Phase Supply Voltage Dimensions(mm) CASS AB MN 2 HM CHANNE STABE 2 HM PWE DESCIPTIN MS 4 hm MS 2 hm CB11.1M2 Watts Nominal 11 7 Max Music Power Watts Frequency esponse 1Hz~4Hz(-3dB) 1Hz~4Hz(-3dB) Signal Noise atio Input Impedance Input Sensitivity T.H.D. Subsonic ow Pass Freq. Phase Bass Boost Supply Voltage K hm 15mV~5V 25Hz 15Hz-4Hz / 18 ~+18dB CB12.1D Hz~4Hz(-3dB) 22K hm 15mV~5V 25Hz 15Hz-4Hz ~+18dB / x19x5 CB7.1M K hm 15mV~5V 25Hz 15Hz-4Hz / 18 ~+18dB Dimensions(mm) 394x19x5 334x19x5 CASS D MN 1 HM CHANNE CB24.1D Hz~4Hz(-3dB) 22K hm 15mV~5V 25Hz 15Hz-4Hz ~+18dB / x19x5

18 SPECIFICATIN CASS D MN 1 HM CHANNE PWE DESCIPTIN MS 4 hm MS 2 hm MS 1 hm Watts Nominal Frequency esponse Signal Noise atio Input Impedance Input Sensitivity T.H.D. Subsonic ow Pass Freq. Phase Bass Boost Supply Voltage Dimensions(mm) CB32.1D Max Music Power Watts 64 1Hz~4Hz(-3dB) 22K hm 15mV~5V 25Hz 15Hz-4Hz / 18 ~+18dB 399x19x5 CB5.1D Hz~4Hz(-3dB) 22K hm 15mV~5V 25Hz 15Hz-4Hz / 18 ~+18dB 528x25x55 CASS D MN 2 HM CHANNE PWE DESCIPTIN MS 4 hm MS 2 hm MS 1 hm Watts Nominal Max Music Power Watts Frequency esponse Signal Noise atio Input Impedance Input Sensitivity T.H.D. Subsonic ow Pass Freq. Phase Bass Boost Supply Voltage Dimensions(mm) CB24.1D N/A Hz~4Hz(-3dB) 22K hm 15mV~5V 25Hz 15Hz-4Hz / 18 ~+18dB 379x19x5 rion Car Audio Car Amplifiers

************* OWNER'S MANUAL BAMF800/2 BAMF1250/2 BAMF1800/2 BAMF2200/2 BAMF2600/2 BAMF1200/4 BAMF1600/4 BAMF2000/1D BAMF4000/1D BAMF5500/1D

************* OWNER'S MANUAL BAMF800/2 BAMF1250/2 BAMF1800/2 BAMF2200/2 BAMF2600/2 BAMF1200/4 BAMF1600/4 BAMF2000/1D BAMF4000/1D BAMF5500/1D ************* OWNER'S MANUAL BAMF800/2 BAMF1250/2 BAMF1800/2 BAMF2200/2 BAMF2600/2 BAMF1200/4 BAMF1600/4 BAMF2000/1D BAMF4000/1D BAMF5500/1D INTRODUCTION Power Acoustik amplifiers provide high-performance

More information

Owner's manual. ST-series D

Owner's manual. ST-series D Owner's manual ST-series D Great Sound - Big Power - Compact Chassis Before operating the unit, please read this manual throughly and retain it for future reference. Protect your Investment Note your information

More information

Q1-750 Q1-1200.2 Q1-2200.2 Q1-4500 Q2-200 Q4-90 Q4-120 HIGH PERFORMANCE AMPLIFIER

Q1-750 Q1-1200.2 Q1-2200.2 Q1-4500 Q2-200 Q4-90 Q4-120 HIGH PERFORMANCE AMPLIFIER Owner s Manual Q1-750 Q1-1200.2 Q1-2200.2 Q1-4500 Q2-200 Q4-90 Q4-120 HIGH PERFORMANCE AMPLIFIER INTRODUCTION Thanks you for purchasing SoundQubed amplifiers for your car audio systems and competitions

More information

CLASS-D MONO BLOCK POWER AMPLIFIERS BZA-1000D / BZA-2000D OWNER'S MANUAL

CLASS-D MONO BLOCK POWER AMPLIFIERS BZA-1000D / BZA-2000D OWNER'S MANUAL CLASS-D MONO BLOCK POWER AMPLIFIERS BZA-1000D / BZA-2000D OWNER'S MANUAL Table of Contents Table of Contents Introduction & Features Specification Features & Controls Installation & Precautions System

More information

OWNER'S MANUAL HIGH PERFORMANCE AMPLIFIERS

OWNER'S MANUAL HIGH PERFORMANCE AMPLIFIERS OWNER'S MANUAL HIGH PERFORMANCE AMPLIFIERS B2 has through years of dedication introduced our line of Ref 0.5 & Anno amplifiers. The B2 line up are made to fullfil our philosophy for amplifiers; A variety

More information

MODEL 2202IQ (1991-MSRP $549.00)

MODEL 2202IQ (1991-MSRP $549.00) F O R T H E L O V E O F M U S I C F O R T H E L O V E O F M U S I C MODEL 2202IQ (1991-MSRP $549.00) OWNER'S MANUAL AND INSTALLATION GUIDE INTRODUCTION Congratulations on your decision to purchase a LINEAR

More information

MOBILE POWER AMPLIFIERS

MOBILE POWER AMPLIFIERS MOBILE AMPLIFIERS 2 X 165 WATT 2 CHANNEL AMPLIFIER 4 X 140 WATT 4 CHANNEL AMPLIFIER 2 X 250 WATT 2 CHANNEL AMPLIFIER 4 X 250 WATT 4 CHANNEL AMPLIFIER 2 X 425 WATT 2 CHANNEL AMPLIFIER 4 X 150 WATT 1 X 300

More information

PLA-4350. PLA-4300D Class-D Mono Block Power Amplifier. Two Channel High Performance Power Amplifier. Four Channel High Performance Power Amplifier

PLA-4350. PLA-4300D Class-D Mono Block Power Amplifier. Two Channel High Performance Power Amplifier. Four Channel High Performance Power Amplifier PLA- 2 1 9 PLA-2250 PLA-2450 PLA-2650 PLA-2150 PLA-2350 PLA-2550 PLA-2750 PLA-2850 Two Channel High Performance Power Amplifier PLA- 4 1 9 PLA-4250 PLA-4150 PLA-4350 Four Channel High Performance Power

More information

Operation Manual for Users

Operation Manual for Users Operation Manual for Users Model No.: FLTAMFMRCD!!!!!!!!!! ATTENTION!!!!!!!!!! THE RESET BUTTON MUST BE PRESSED TO ENSURE PROPER OPERATION. SEE INSTRUCTION MANUAL Table of Contents Table of Contents ---------------------------------------------------------------------------------------------

More information

USER MANUAL D-CLASS AMPLIFIER CA-DA12250 CA-DA41400 CA-DA51600. Specifications and design are subject to change without notice

USER MANUAL D-CLASS AMPLIFIER CA-DA12250 CA-DA41400 CA-DA51600. Specifications and design are subject to change without notice USER MANUAL D-CLASS AMPLIFIER CA-DA12250 CA-DA41400 CA-DA51600 Specifications and design are subject to change without notice AMPLIFIER SPECIFICATIONS CA-DA12250 CA-DA41400 CA-DA51600 Peak Power (Watts)

More information

USA 305. Power Amplifier OWNERS MANUAL AND INSTALLATION GUIDE PARALLEL/SERIES WIRING DIAGRAMS. two 4 ohm woofers in parallel = 2 ohms

USA 305. Power Amplifier OWNERS MANUAL AND INSTALLATION GUIDE PARALLEL/SERIES WIRING DIAGRAMS. two 4 ohm woofers in parallel = 2 ohms PARALLEL/SERIES WIRING DIAGRAMS USA 305 two 4 ohm woofers in parallel = 2 ohms two 4 ohm woofers in series = 8 ohms SOUNDSTREAM TECHNOLOGIES 120 Blue Ravine Road Folsom California 95630 USA ph 916.351.1288

More information

RVA600.1 4 OHM MONOBLOCK

RVA600.1 4 OHM MONOBLOCK RVA600.1 4 OHM MONOBLOCK Introduction Thank you for purchasing this Rockville RVA600.1 amplifier. Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. Our competition

More information

How to Install and Operate the XA4100 Amplifier. Contents. Technical Assistance

How to Install and Operate the XA4100 Amplifier. Contents. Technical Assistance BASS -BOOST CH 1/2 BASS -BOOST CH1/2 CH 3/4 HPF LPF CH 3/4 How to Install and Operate the XA4100 Amplifier POWER HIGH INPUT HPF LPF MODE 2CH 4CH 3CH LEVEL MIN MAX MIN MAX 50 250 HPF LPF HIGH INPUT 50 250

More information

JAD SERIES OWNER S MANUAL. JAD900.5 5 Channel Full Range Class D Amplifier

JAD SERIES OWNER S MANUAL. JAD900.5 5 Channel Full Range Class D Amplifier JAD SERIES OWNER S MANUAL JAD900.5 5 Channel Full Range Class D Amplifier Authorized Dealer Name: Purchase Date: Model Number: Serial Number: JAD900.5 PERFORMANCE MODEL: RMS Power (4 Ohms, Stereo) RMS

More information

DPX1000.2 Power System Amplifier

DPX1000.2 Power System Amplifier DPX1000.2 Power System Amplifier INTRODUCTION The Clarion DPX1000.2 is a full-featured two-channel amplifier that. incorporates the following features: INTRODUCTION Digital Technology for high efficiency

More information

User s Guide. for amplifiers. SPL 3000c1

User s Guide. for amplifiers. SPL 3000c1 User s Guide for amplifiers FETURES Digital class-d linkable mono block amplifier Dual MOS-FET PWM power supplies Daisy-chain through output Jack Stable into 1 ohm and 2 ohms load 24d/oct variable crossover

More information

AMPLIFIERS. and ACCESSORIES

AMPLIFIERS. and ACCESSORIES AMPLIFIERS and ACCESSORIES HISTORY OF EARTHQUAKE In 1984, Joseph J. Sahyoun, a music freak and Aerospace Engineer unhappy with existing loud speaker technology and performance, decided to put his advanced

More information

ZEUS 25th ANNIVERSARY EDITION HIGH PERFORMANCE AMPLIFIERS

ZEUS 25th ANNIVERSARY EDITION HIGH PERFORMANCE AMPLIFIERS ZEUS 25th ANNIVESAY EDITION HIGH PEFOMANCE AMPIFIES As Hifonics celebrates it s 25th anniversary of producing the finest high end car audio products available, we would like to thank you for your continued

More information

X 1400 X 2400 4-Channel Amplifier Instruction Manual

X 1400 X 2400 4-Channel Amplifier Instruction Manual INNOVATIVE AUDIO PERFORMANCES MADE IN GERMANY X 1400 X 2400 4-Channel Amplifier Instruction Manual Introduction Contents Dear Customer, Congratulations on your purchase of this high-quality BRAX product.

More information

MONO CHANNEL CLASS "D" AUTOMOTIVE AMPLIFIER G1-1200 / G1-2000 / G1-3000 INSTRUCTION MANUAL

MONO CHANNEL CLASS D AUTOMOTIVE AMPLIFIER G1-1200 / G1-2000 / G1-3000 INSTRUCTION MANUAL MONO CHANNEL CLASS "D" AUTOMOTIVE AMPLIFIER G1-1200 / G1-2000 / G1-3000 INSTRUCTION MANUAL CONGRATULATIONS ON YOUR PURCHASE Your new high fidelity mono block amplifier is designed to deliver maximum enjoyment

More information

STREET MACHINE AMPLIFIERS

STREET MACHINE AMPLIFIERS STEET MACHINE AMPIFIES Autotek is proud to introduce the finest high end car audio products available and would like to thank you for your continued support. The Street Machine Series has been designed

More information

POWERZONE AMPLIFIERS

POWERZONE AMPLIFIERS ZONE AMPIFIES Crunch is proud to introduce the finest high end car audio products available and would like to thank you for your continued support. The PowerZone Series products have been designed to a

More information

MPA-101. WARNING: Improper installation could result in damage to the amplifier and/or speakers. Read all instructions before installation.

MPA-101. WARNING: Improper installation could result in damage to the amplifier and/or speakers. Read all instructions before installation. MPA-101 WARNING: Improper installation could result in damage to the amplifier and/or speakers. Read all instructions before installation. The lightning flash with arrowhead, within an equilateral triangle,

More information

Owner s Manual 900.4. 4 channel amplifier

Owner s Manual 900.4. 4 channel amplifier Owner s Manual 900.4 4 channel amplifier THANK YOU Limited Warranty: for purchasing RE AUDIO Bluetooth amplifiers BT-900.4. With almost no sacrifice on sound quality, BT-900.4 easily plays the music from

More information

LOXONE 12 Channel Amplifier

LOXONE 12 Channel Amplifier LOXONE 12 Channel Amplifier Item no.: 200110 Thank you for purchasing the Loxone Twelve Channel Amplifier. The versatility of the Amplifier makes it the perfect choice for almost every type of custom multi-room

More information

KAC-8103D. CLASS D MONO POWER AMPLIFIER 7 page 2-6 INSTRUCTION MANUAL. AMPLIFICATEUR MONO CLASSE D 7 page 8-12 MODE D EMPLOI

KAC-8103D. CLASS D MONO POWER AMPLIFIER 7 page 2-6 INSTRUCTION MANUAL. AMPLIFICATEUR MONO CLASSE D 7 page 8-12 MODE D EMPLOI KAC-8103D CLASS D MONO POWER AMPLIFIER 7 page 2-6 INSTRUCTION MANUAL AMPLIFICATEUR MONO CLASSE D 7 page 8-12 MODE D EMPLOI AMPLIFICADOR DE POTENCIA CLASE D MONOFÓNICO 7 página 14-18 MANUAL DE INSTRUCCIONES

More information

HUMAN REIGN HR 2 HR 4

HUMAN REIGN HR 2 HR 4 HUMAN REIGN HR 2 HR 4 Owner s Manual and Installation Guide Congratulations! You now own the Soundstream Human Reign amplifier, the product of an uncompromising design and engineering philosophy. Your

More information

Internet store of autogoods

Internet store of autogoods PHONES (044) 360-7-130 (050) 336-0-130 (063) 788-0-130 (067) 233-0-130 (068) 282-0-130 Internet store of autogoods ICQ 294-0-130 597-0-130 SKYPE km-130 CAR RECEIVERS Receivers Media receivers and stations

More information

bba - Balboa Bluetooth Audio (AMP) Installation & User Guide

bba - Balboa Bluetooth Audio (AMP) Installation & User Guide bba - Balboa Bluetooth Audio (AMP) Installation & User Guide Bluetooth Integration CONNECT YOUR SMART DEVICE TO YOUR HOT TUB With Bluetooth connection you can now play all your favorite songs directly

More information

QUALITY, RELIABILITY, & PURE BLISS

QUALITY, RELIABILITY, & PURE BLISS QUALITY, RELIABILITY, & PURE BLISS 4000 WATT RMS CLASS D COMPETITION AMP A4KDN OPERATING INTSTRUCTIONS PLEASE RETAIN MANUAL FOR FUTRE USE AND REFERENCE The Audiobahn Way To bring the product to market

More information

ATB10AJ / ATB12AJ OWNER S MANUAL PLEASE READ THIS MANUAL BEFORE OPERATING THIS UNIT. RETAIN FOR FUTURE REFERENCE.

ATB10AJ / ATB12AJ OWNER S MANUAL PLEASE READ THIS MANUAL BEFORE OPERATING THIS UNIT. RETAIN FOR FUTURE REFERENCE. ATB10AJ / ATB12AJ OWNER S MANUAL PLEASE READ THIS MANUAL BEFORE OPERATING THIS UNIT. RETAIN FOR FUTURE REFERENCE. The Audiobahn Way To bring the product to market that excites the consumer through sound

More information

PZT500.2 / PZT1100.2 / PZT1400.2 PZT900.4 / PZT1400.4 PZT1500.1

PZT500.2 / PZT1100.2 / PZT1400.2 PZT900.4 / PZT1400.4 PZT1500.1 PZT5. / PZT11. / PZT1. PZT9. / PZT1. PZT15.1 POWEZONE PZT SEIES AMPIFIES The PZT Series products have been designed to a very high level of performance, with features unavailable in any other product.

More information

Contents. Mission Statement...2. Warnings... 4. Wire Size...5. Installation Guidelines... 6. i-force Inputs...9. Bass Boost Control...10. i-force...

Contents. Mission Statement...2. Warnings... 4. Wire Size...5. Installation Guidelines... 6. i-force Inputs...9. Bass Boost Control...10. i-force... Contents Mission Statement...2 Warnings... 4 Wire Size...5 Installation Guidelines... 6 i-force Inputs...9 Bass Boost Control...10 i-force...11 i-250...11 i-2100...14 i-450...17 i-4100...20 i-5100...23

More information

OWNER S MANUAL A2002J/A4002J/A8002J/A4004J A6004J/A8000J/A16000J/A5005J

OWNER S MANUAL A2002J/A4002J/A8002J/A4004J A6004J/A8000J/A16000J/A5005J A2002J/A4002J/A8002J/A4004J A6004J/A8000J/A16000J/A5005J OWNER S MANUAL PLEASE READ THIS MANUAL BEFORE OPERATING THIS UNIT. RETAIN FOR FUTURE REFERENCE. The Audiobahn Way To bring the product to market

More information

ACTIVE. www.edgecaraudio.com

ACTIVE. www.edgecaraudio.com ACTIVE www.edgecaraudio.com INTRODUCTION This instruction manual is for your safety and must be adhered to at all times. Please read and ensure that you fully understand the installation and set up procedures

More information

Model No.: MR-140. REMARK: FINISH SIZE IS 145x210mm. Effected 31 / May / 07

Model No.: MR-140. REMARK: FINISH SIZE IS 145x210mm. Effected 31 / May / 07 Model No.: MR-0 HI-POWER x Watts INT RPT RDM 6 This product is sold and serviced exclusively by Prospec Electronic Inc. and must be returned to Prospec for in and out of warranty repairs. It can not be

More information

High Power Receiver CR-W400U Operating Instructions

High Power Receiver CR-W400U Operating Instructions High Power Receiver CR-W400U Operating Instructions Please read these instructions carefully before using this product and save this manual for future use. Panasonic welcomes you to our ever growing family

More information

Phoenix Gold International, Inc. (or "Phoenix Gold") warrants its products against defects in materials and workmanship for a limited period of time.

Phoenix Gold International, Inc. (or Phoenix Gold) warrants its products against defects in materials and workmanship for a limited period of time. Phoenix Gold International, Inc. (or "Phoenix Gold") warrants its products against defects in materials and workmanship for a limited period of time. For a period of one (1) year from date of original

More information

Solar Home System. User Manual. AEH-SHS01-10W2L Solar Home System 2 Lamps

Solar Home System. User Manual. AEH-SHS01-10W2L Solar Home System 2 Lamps Solar Home System User Manual AEHSHS0110W2L Solar Home System 2 Lamps All rights reserved Specifications subject to change without prior notice 2 Dear Customer, Thank you for purchasing Schneider Electric

More information

Kit 106. 50 Watt Audio Amplifier

Kit 106. 50 Watt Audio Amplifier Kit 106 50 Watt Audio Amplifier T his kit is based on an amazing IC amplifier module from ST Electronics, the TDA7294 It is intended for use as a high quality audio class AB amplifier in hi-fi applications

More information

Owners Manual ASA SERIES CLASS D AMPLIFIER ASA3-600.1D ASA3-1000.1D ASA3-1500.1D. 1-OHM STABLE DESIGN Minimum Impedance Load is 1-Ohm*

Owners Manual ASA SERIES CLASS D AMPLIFIER ASA3-600.1D ASA3-1000.1D ASA3-1500.1D. 1-OHM STABLE DESIGN Minimum Impedance Load is 1-Ohm* 1-OHM STABLE DESIGN Minimum Impedance Load is 1-Ohm* *2-ohm minimum impedance when used in Dual Link Power Doubling confi guration. ASA3-600.1D ASA3-1000.1D ASA3-1500.1D ASA SERIES CLASS D AMPLIFIER Owners

More information

HIGH PERFORMANCE CAR AUDIO MODEL:CR-82 8 CHANNEL ELECTRONIC CROSSOVER NETWORK SYSTEM. www.pyramidcaraudio.com

HIGH PERFORMANCE CAR AUDIO MODEL:CR-82 8 CHANNEL ELECTRONIC CROSSOVER NETWORK SYSTEM. www.pyramidcaraudio.com HIGH PERFORMANCE CAR AUDIO MODEL:CR-82 8 CHANNEL ELECTRONIC CROSSOVER NETWORK SYSTEM 1 www.pyramidcaraudio.com INTRODUCTION This CR-82 is an Electronic Crossover Network with which you can install various

More information

CELO5. User & Installation Manual. www.audac.eu

CELO5. User & Installation Manual. www.audac.eu CELO5 User & Installation Manual www.audac.eu 2 Introduction 5 High-end Slim Ceiling Speaker The CELO5 is the 5 version of AUDAC s CELO High-end Slim ceiling speaker series with an RMS power of 50 Watt

More information

A4004V / A6004V / A8000V / A16000V

A4004V / A6004V / A8000V / A16000V Intake Series Amplifiers / A2002V / / / / / The Audiobahn Way To bring the product to market that excites the consumer through sound and vision from an orientation of integrity and customer service. We

More information

Owner s Manual AWM910 JENSEN AWM910 COMPACT DISC PLAYER RADIO CD COMPACT MUSIC SYSTEM MUTE AUX BAND AUX IN PUSH PUSH PWR VOL ALARM T/F AUD SPK A SPK B

Owner s Manual AWM910 JENSEN AWM910 COMPACT DISC PLAYER RADIO CD COMPACT MUSIC SYSTEM MUTE AUX BAND AUX IN PUSH PUSH PWR VOL ALARM T/F AUD SPK A SPK B AWM910 Owner s Manual COMPACT DISC PLAYER PUSH 1 2 3 4 5 6 RPT SCAN RDM H M PUSH PWR VOL ALARM SET ON/OFF EQ T/F AUD RADIO CD COMPACT MUSIC SYSTEM MUTE AUX BAND CD AUX IN A B A+B JENSEN AWM910 Thank You!

More information

Amplifier: AMP-8125. Feature Summary

Amplifier: AMP-8125. Feature Summary Savant Systems AMP-825 is a multi-room amplifier for distributed audio applications. The AMP-825 is an ultraefficient Class D amplifier delivering 8 channels of reliable amplification rated at 25 watts

More information

! Technical Assistance. Contents. How to install and operate the DLS CA20, the CA21, CA40 and the CA50 amplifiers.

! Technical Assistance. Contents. How to install and operate the DLS CA20, the CA21, CA40 and the CA50 amplifiers. Contents How to install and operate the DLS CA20, the CA21, CA40 and the CA50 amplifiers. Features.. 2 Installation.. 2 Tools and materials needed. 3 Amplifier installation kit... 3 Routing Wires... 3

More information

KX400.1 / KX600.1 / KX1200.1

KX400.1 / KX600.1 / KX1200.1 Introduction Attention: Mono-Block Models: Please record your purchase information in the area below. We recommend attaching the original sales receipt to this manual for future reference. If you require

More information

TA92001 Owner s Manual

TA92001 Owner s Manual TA92001 Owner s Manual Introduction Thank you for choosing MTX to help reach the ultimate goal with your vehicle. Adding MTX amplifiers and matching MTX speakers and subwoofers with StreetWires connections

More information

Model No.: MR-4.2 EST.JBL(MR4.2)-061129-I/B. 145x210mm. Revised 31 / May / 04

Model No.: MR-4.2 EST.JBL(MR4.2)-061129-I/B. 145x210mm. Revised 31 / May / 04 EST.JBL(MR4.)-06-I/B Model No.: MR-4. MOD MR - 4. 4CHx45Watts SEL INT RPT 4 RDM 5 6 This product is sold and serviced exclusively by Prospec Electronic Inc. and must be returned to Prospec for in and out

More information

TOA 900 SERIES II MIXER POWER AMPLIFIER

TOA 900 SERIES II MIXER POWER AMPLIFIER Operating Instructions TOA 900 SERIES II MIXER POWER AMPLIFIER A-903MK2 A-906MK2 A-912MK2 TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING

More information

EARTHQUAKE SOUND PowerHouse Series Amplifiers Owners Manual

EARTHQUAKE SOUND PowerHouse Series Amplifiers Owners Manual EARTHQUAKE SOUND PowerHouse Series Amplifiers Owners Manual MODELS: PH800W/2 PH1000W/2 PH2200W/4 PH2000W/D1 PH2000W/D1.1 PH5000W/D1 PH10000W/D1 PH20000W/D1 The Sound That Will Move You. Earthquake Sound

More information

SP1790JK 900MHz Wireless Indoor/Outdoor Speakers. User Manual INTRODUCTION FEATURES IMPORTANT SAFETY INFORMATION

SP1790JK 900MHz Wireless Indoor/Outdoor Speakers. User Manual INTRODUCTION FEATURES IMPORTANT SAFETY INFORMATION SP1790JK 900MHz Wireless Indoor/Outdoor Speakers INTRODUCTION This 900 MHz digital hybrid wireless speaker system uses the latest wireless technology that enables you to enjoy music and TV sound anywhere

More information

EPSOLAR LS0512R / LS0524R. Solar Light Controller INSTRUCTION MANUAL. Please read this manual carefully before using the product!

EPSOLAR LS0512R / LS0524R. Solar Light Controller INSTRUCTION MANUAL. Please read this manual carefully before using the product! EPSOLAR LS0512R / LS0524R Solar Light Controller INSTRUCTION MANUAL Please read this manual carefully before using the product! LandStar LS0512R / LS0524R Solar Light Controller Nominal system voltage

More information

Brio-Rmanual:Cursamanual.qxd 08/04/2011 09:25 Page1

Brio-Rmanual:Cursamanual.qxd 08/04/2011 09:25 Page1 - Brio-Rmanual:Cursamanual.qxd 08/04/2011 09:25 Page1 Brio-Rmanual:Cursamanual.qxd 08/04/2011 09:25 Page2 CONTENTS INTRODUCTION, FEATURES AND TECHNOLOGY 1-3 INSTALLATION 3 CONNECTIVITY 4-6 LOUDSPEAKER

More information

Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier INTRODUCTION

Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier INTRODUCTION Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier INTRODUCTION The Smarthome SELECT Bluetooth Wireless Stereo Audio Receiver and Amplifier is a multi-functional compact device. It

More information

Owners Manual XTREME SERIES CLASS D AMPLIFIER XTA 4000D XTA 5000D

Owners Manual XTREME SERIES CLASS D AMPLIFIER XTA 4000D XTA 5000D XTA 4000D XTA 5000D XTREME SERIES CLASS D AMPLIFIER Owners Manual Please read through this manual to familiarize yourself with your new amplifier. Should your PowerBass Xtreme mobile amplifier ever require

More information

Hegel H1 High End Integrated Amplifier

Hegel H1 High End Integrated Amplifier Hegel H1 High End Integrated Amplifier www.hegel.com info@hegel.com USER GUIDE Congratulations on your new HEGEL! Our products are based on a simple philosophy: The component shall reproduce the original

More information

Antenna Splitter ASA 1. Instruction manual

Antenna Splitter ASA 1. Instruction manual Antenna Splitter ASA 1 Instruction manual Contents Important safety instructions... 2 The ASA 1 active antenna splitter... 4 Delivery includes... 4 Operating elements... 5 Putting the ASA 1 into operation...

More information

AMPLIFIERS P300X1 P300X2 P400X1 P400X2 P400X4 P500X1BD P500X2 P600X4 P1000X1BD P1000X2 P1000X5. Installation & Operation

AMPLIFIERS P300X1 P300X2 P400X1 P400X2 P400X4 P500X1BD P500X2 P600X4 P1000X1BD P1000X2 P1000X5. Installation & Operation AMPLIFIERS P300X1 P300X2 P400X1 P400X2 P400X4 P500X1BD P500X2 P600X4 P1000X1BD P1000X2 P1000X5 Installation & Operation Introduction Specifications 2 Dear Customer, Congratulations on your purchase of

More information

Safety Warnings and Guidelines

Safety Warnings and Guidelines Safety Warnings and Guidelines Thank you for purchasing this Wireless Speaker Amplifier! For best results, please thoroughly read this manual and carefully follow the instructions. Please pay extra attention

More information

Gemini II. Subwoofer System OWNERS MANUAL

Gemini II. Subwoofer System OWNERS MANUAL Gemini II Subwoofer System OWNERS MANUAL CONTENTS Page No. 1) Safety instructions. 2) 3) 4) Connecting up your Gemini II. Connecting up using the high level input. Connecting up using the low level input.

More information

Installation & Operation Manual

Installation & Operation Manual GET CONNECTED Installation & Operation Manual DEVICE INTEGRATION AND CHARGING KIT TranzIt USB IS32 Note to Readers, The information contained within the following documentation is subject to change without

More information

Achat 115MA full-range speaker. user manual

Achat 115MA full-range speaker. user manual Achat 115MA full-range speaker user manual Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de

More information

2 X 250Watt Class D Audio Amplifier Board IRS2092 User s Guide

2 X 250Watt Class D Audio Amplifier Board IRS2092 User s Guide 2 X 250Watt Class D Audio Amplifier Board IRS2092 User s Guide 2004-2013 Sure Electronics Inc. AA-AB32291_Ver1.0 2 X 250Watt Class D Audio Amplifier Board IR2092 Note: Please read this manual carefully

More information

i ChatterBox! Motorcycle Security

i ChatterBox! Motorcycle Security i Before you Start the Installation * Please read this manual to become familiar with the requirements necessary to complete the installation. * Use a high quality multi-meter to test all wires before

More information

User s Manual Before using the inverter, you need to read and save the safety instructions.

User s Manual Before using the inverter, you need to read and save the safety instructions. User s Manual Before using the inverter, you need to read and save the safety instructions. STI SERIES (STI200, STI300, STI500, STI700, STI1000) Power Frequency Pure Sine Wave Inverter The information

More information

BXR. Owner, s Manual. One hundred BASS EXTENDED RANGE P/N 040695

BXR. Owner, s Manual. One hundred BASS EXTENDED RANGE P/N 040695 THE SOUND THAT CREATES LEGENDS BASS EXTENDED RANGE BXR One hundred Owner, s Manual P/N 040695 BXR 100 Owner s Manual Congratulations on your purchase of the Fender BXR 100 Bass amplifier. The Fender BXR

More information

INSTRUCTION MANUAL PLEASE READ ALL THE INSTRUCTIONS COMPLETELY BEFORE USE AND SAVE THIS MANUAL FOR FUTURE REFERENCE

INSTRUCTION MANUAL PLEASE READ ALL THE INSTRUCTIONS COMPLETELY BEFORE USE AND SAVE THIS MANUAL FOR FUTURE REFERENCE INSTRUCTION MANUAL PLEASE READ ALL THE INSTRUCTIONS COMPLETELY BEFORE USE Ver. 2.0 AND SAVE THIS MANUAL FOR FUTURE REFERENCE Table of Contents Unpacking... 3 About the CCRadio-EP... 4 Quick Start Guide...

More information

OWNER S MANUAL. Technical Specifications Output power (14.4v) Features HIGH PERFORMANCE CLASS D MONOBLOCK SUBWOOFER AMPLIFIER

OWNER S MANUAL. Technical Specifications Output power (14.4v) Features HIGH PERFORMANCE CLASS D MONOBLOCK SUBWOOFER AMPLIFIER Technical Specifications Output power (14.4v) 1 x 3000 Watt Max @ 1 ohm 1 x 1000 Watt RMS @ 1 ohm 1x 500 Watt RMS @ 2 ohm (THD+N < 2%) 1 x 300 Watt RMS @ 4 ohm (THD+N < 1%) Output power (Two TL-1023 amplifiers

More information

2 Ohm Nominal Coaxial Speaker OWNER S MANUAL

2 Ohm Nominal Coaxial Speaker OWNER S MANUAL 2 Ohm Nominal Coaxial Speaker OWNER S MANUAL 1 page 1 SPL 65 Coaxial Speaker Congratulations on your purchase of the Soundstream SPL 65 Coaxial Speaker. When used with a high quality 2 ohm rated power

More information

THE MclNTOSH MC 2100 SOLID STATE STEREO POWER AMPLIFIER

THE MclNTOSH MC 2100 SOLID STATE STEREO POWER AMPLIFIER THE MclNTOSH MC 2100 SOLID STATE STEREO POWER AMPLIFIER Price $1.25 Your MC 2100 stereo amplifier will give you many years of pleasant and satisfactory performance. If you have any questions concerning

More information

VLT Series 300 Watt True Sine Wave Inverter

VLT Series 300 Watt True Sine Wave Inverter VLT Series 300 Watt True Sine Wave Inverter PURE SINE WAVE INVERTER I ON 0 OFF REMOTE CONTROL AC OUTPUT POWER STATUS Vout Vin Models VLT12-300 VLT24-300 300 Watt VLT Series Inverter - 1 - TABLE OF CONTENTS

More information

DAB1001. Wireless Digital Radio Interface. Installation & User Guide

DAB1001. Wireless Digital Radio Interface. Installation & User Guide DAB1001 Wireless Digital Radio Interface Installation & User Guide Contents Contents... 2 Introduction... 3 Contents of Package... 4 Installation... 5 Product Overview... 5 Installation Procedure... 5

More information

Active Speaker System LX523 AUDAC PROFESSIONAL AUDIO EQUIPMENT. Active Speaker System with remote input LX523. User Manual & Installation Guide

Active Speaker System LX523 AUDAC PROFESSIONAL AUDIO EQUIPMENT. Active Speaker System with remote input LX523. User Manual & Installation Guide Active Speaker System LX523 AUDAC PROFESSIONAL AUDIO EQUIPMENT Active Speaker System with remote input LX523 User Manual & Installation Guide AUDAC PROFESSIONAL AUDIO EQUIPMENT User Manual & Installation

More information

EVID Compact Sound Speaker System

EVID Compact Sound Speaker System EVID Compact Sound Speaker System EVID-C44, EVID-C2.1, EVID-40C, EVID-S44, EVID-S44W, EVID-2.1, EVID-2.1W, EVID-40S, and EVID-40SW en Installation Manual en 3 Table of contents 1 Safety 4 2 Welcome 6

More information

MASTERSOUND. M a s t e r E m o t i o n. PF 100 Limited. Made in Italy

MASTERSOUND. M a s t e r E m o t i o n. PF 100 Limited. Made in Italy MASTERSOUND PF 100 Limited Made in Italy Our Philosophy Our philosophy is simple: we want to produce amplifiers which stimulate the emotions for those who enjoy music. We believe that every piece of music

More information

EKX Passive Loudspeakers

EKX Passive Loudspeakers EKX Passive Loudspeakers EKX-12, EKX-15, EKX-15S, and EKX-18S en User Manual en 3 Table of contents 1 Safety 4 1.1 Important Safety Instructions 4 1.2 Precautions 4 1.3 Suspension 5 2 Description 6 2.1

More information

CV-5000 HEAVY DUTY PROFESSIONAL AMPLIFIER

CV-5000 HEAVY DUTY PROFESSIONAL AMPLIFIER CV-5000 HEAVY DUTY PROFESSIONAL AMPLIFIER USER MANUAL IMPORTANT SAFETY INSTRUCTIONS 2 TABLE OF CONTENTS Introduction... 4 Features.. 5 Front Panel Controls.... 6 Rear Panel Controls. 8 Protection.... 10

More information

USER S MANUAL. MaxPower 400-600 UPS. Uninterruptible Power System 28-2MAXPO0018

USER S MANUAL. MaxPower 400-600 UPS. Uninterruptible Power System 28-2MAXPO0018 USER S MANUAL MaxPower 400-600 UPS Uninterruptible Power System 28-2MAXPO0018 IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS This manual contains important instructions for models MaxPower 400 and

More information

Feel what you ve been missing

Feel what you ve been missing Feel what you ve been missing Page 12 Thank you for your purchase of the ButtKicker Concert the most powerful, musically accurate and long lasting low frequency audio driver available today. This User

More information

How to install and operate the DLS ULTIMATE A-series amplifiers A1, A2, A3, A4, A5, A6, A7 & A8

How to install and operate the DLS ULTIMATE A-series amplifiers A1, A2, A3, A4, A5, A6, A7 & A8 Contents How to install and operate the DLS ULTIMATE Aseries amplifiers A1, A2, A3, A4, A5, A6, A7 & A8 Welcome! This owners manual is written in easy english and uses a lot of drawings to simply the installation

More information

STEREO PREAMPLIFIER INSTRUCTIONS FOR USE

STEREO PREAMPLIFIER INSTRUCTIONS FOR USE XX STEREO PREAMPLIFIER INSTRUCTIONS FOR USE Thank you for purchasing the Musical Fidelity A5 CR Preamplifier. Used properly and carefully, it should give many years of outstanding musical reproduction.

More information

IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER.

IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER. THERMAWAVE CERAMIC HEATER Model HZ-850 Series Model HZ-860 Series IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND SAVE THESE OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS HEATER. Warning Failure to

More information

Hear The Future...Now! SIEM-2T/SIEM-2R

Hear The Future...Now! SIEM-2T/SIEM-2R Hear The Future...Now! SIEM-2T/SIEM-2R UHF PLL Mono In Ear Monitoring System 856 59508-03 ATTENTION Please pay high attention to the following information. The guideline published by Occupational Safety

More information

DX1400, DX700, DX350

DX1400, DX700, DX350 DX1400, DX700, DX350 Class D Subwoofer Amplifiers One of the hardest problems to overcome in a high power car stereo system is providing the tremendous amount of current necessary to feed high power amplifiers.

More information

BRZ1200.1D / BRZ1700.1D / BRZ2100.1D BRZ2400.1D / BRZ3000.1D PRO

BRZ1200.1D / BRZ1700.1D / BRZ2100.1D BRZ2400.1D / BRZ3000.1D PRO BRZ1.1D / BRZ17.1D / BRZ1.1D BRZ.1D / BRZ3.1D PRO HIFONICS BRUTUS HIGH PERFORMANCE AMPLIFIERS The BRUTUS BRZ Series products have been designed to a very high level of performance, with features unavailable

More information

BeoLab 1. User s guide

BeoLab 1. User s guide BeoLab 1 User s guide Legal notice: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing

More information

Universal Vehicle Power Supply 9007AX01. Installation Instructions

Universal Vehicle Power Supply 9007AX01. Installation Instructions Universal Vehicle Power Supply 9007AX01 Installation Instructions Disclaimer Honeywell International Inc. ( HII ) reserves the right to make changes in specifications and other information contained in

More information

Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation

Stand Alone POTS Fiber Optic System. P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit. Description & Installation Stand Alone POTS Fiber Optic System P31372 Station (Subscriber) Unit P31379 Remote (Exchanger) Unit Description & Installation Printed in USA 09/11 TO466 Rev. A Table of Contents Page 1.0 SCOPE 2 2.0 PRODUCT

More information

Mobile 3G. Cellular Signal Booster 460102. Need help? www.wilsonelectronics.com Tech Support 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST

Mobile 3G. Cellular Signal Booster 460102. Need help? www.wilsonelectronics.com Tech Support 866-294-1660 Mon.- Fri. Hours: 7 am to 6 pm MST Mobile 3G Cellular Signal Booster 460102 Need help? www.wilsonelectronics.com Tech Support 866-294-1660 THE ALUMINUM CASING OF YOUR SIGNAL BOOSTER!! WILL ADJUST TO THE TEMPERATURE OF ITS ENVIRONMENT, BUT

More information

Congratulations! Thank you!

Congratulations! Thank you! TM-47 ORDERCODE D1370 Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio Microphone range brings excitement to any venue. Whether you want simple plug-&-play action

More information

BXR 300C BXR 300R. Owner, s Manual P/N 040294

BXR 300C BXR 300R. Owner, s Manual P/N 040294 THE SOUND THAT CREATES LEGENDS BXR 300C BXR 300R Owner, s Manual P/N 040294 INTRODUCTION The Fender BXR 300 AMPLIFIER is the most recent effort in state of the art bass amplifier technology, and is a member

More information

Model DB 750 Tube Bass Head

Model DB 750 Tube Bass Head Model DB 750 Tube Bass Head Congratulations on purchasing Aguilar Amplification s DB 750 Tube Bass Head! The DB 750 is a groundbreaking hybrid amplifier with a discrete Mosfet output section and an all

More information

Installation and Operation Guide for PD4000 Series Power Control Center

Installation and Operation Guide for PD4000 Series Power Control Center Extended warranties are available for purchase at www.progressivedyn.com Installation and Operation Guide for PD4000 Series Power Control Center Member Thank you for selecting Progressive Dynamics as your

More information

How To Use The Gr8A Power Amplifier

How To Use The Gr8A Power Amplifier GR8A 8 Channel Amplifier USER GUIDE Publication AP4298 Limited One Year Warranty This product has been manufactured in the UK by ALLEN & HEATH and is warranted to be free from defects in materials or workmanship

More information

SERIES AND PARALLEL WIRING REFERENCE

SERIES AND PARALLEL WIRING REFERENCE SERIES AND PARALLEL WIRING REFERENCE Class A 5.0 & 10.0 2-4 ohm drivers in parallel = 2 ohms Power Amplifiers 4-4 ohm drivers in parallel =1 ohm OWNERS MANUAL AND INSTALLATION GUIDE 2-4 ohm drivers in

More information

Tone Hammer 500. Owners Manual. Manual Version 1.0

Tone Hammer 500. Owners Manual. Manual Version 1.0 Tone Hammer 500 Owners Manual Manual Version 1.0 1. Incorporating the preamp from the popular Tone Hammer preamp/di pedal this superlight bass head combines three bands of flexible EQ, a colorful "Drive"

More information

AM / FM Tuner + RDS. Model: TU-101. www.pulse-audio.co.uk

AM / FM Tuner + RDS. Model: TU-101. www.pulse-audio.co.uk AM / FM Tuner + RDS Model: TU-101 www.pulse-audio.co.uk 1 Safety Information The lightning bolt within a triangle is intended to alert the user to the presence of dangerous voltage levels within the product

More information

How To Use A Power Supply Unit (Upu)

How To Use A Power Supply Unit (Upu) BRAVER UPS (Uninterruptible Power System) User s Manual Safety CAUTION! This UPS utilizes voltages that may be hazardous. Do not attempt to disassemble the unit. The unit contains no user replaceable parts.

More information