P R O D U C T C A T A L O G
|
|
- Marilyn Byrd
- 7 years ago
- Views:
Transcription
1 A A A T E C H N O L O G Y & SPECIALTIES CO., INC. P R O D U C T C A T A L O G Y E A R S S E R V I N G I N D U S T R Y
2 AAA Technology & Specialties Co., Inc. TABLE OF CONTENTS Introduction 1 Shoe Types 2 How to Order 3 Slot Option Detain 4 Slide Bearing Detail 5 Guide Detail 6 Base Plate Detail 7 SHOE TYPES AND SPECIFICATIONS Fig Split Beam T-Shoe 8 Fig Split Beam T-Shoe with Gusset 9 Fig Split Beam T-Shoe with U-Bolts 10 Fig Split Beam T-Shoe with U-Bolts and Gusset 11 Fig Split Beam T-Shoe with Clamps 12 Fig Split Beam T-Shoe with Clamps and Gusset 13 Fig Fabricated T-Shoe 14 Fig Fabricated T-Shoe with Gusset 15 Fig Fabricated T-Shoe with U-Bolts 16 Fig Fabricated T-Shoe with U-Bolts and Gusset 17 Fig Fabricated T-Shoe with Clamps 18 Fig Fabricated T-Shoe with Clamps and Gusset 19 Fig Double Upright T-Shoe 20 Fig Double Upright T-Shoe with U-Bolts 21 Fig Double Upright T-Shoe with Clamps 22 Fig Heavy Duty Pipe Saddle 23
3 Page 1 Pipe Support and T Shoes AAA Technology & Specialty Co., Inc. is proud to provide a complete line of Pipe Shoes and Supports. These pipe shoes are constructed in accordance with the rules and regulations specified and defined by the Quality Assurance Procedures for Pipe Supports Manufactured per ASME B31.1, B31.2, B31.3, B31.4, B31.5, B31.8, B31.9 & B31.11 Piping Codes, the ANSI/AWS D1.1 and the MSS SP-58 & MSS SP-69 Standards. Well trained and experienced personal using formal standardized document systems and fabrication control methods supervise all projects. The Pipe Shoes and Supports offered herein are built in three categories: Split Beam Construction, Welded Flat Bar or Double Upright Construction in accordance to your requirements. In addition, we can supply these in various Guided Shoe Assemblies as illustrated in the pages hereafter. These shoes can be built with our TRI*SLIDE slide bearings furnished in PTFE over PTFE, Stainless Steel over PTFE, Stainless Steel over Graphite, or any other combination that you require. We are also able to supply Meehanite & Alloys for high temperature applications, Permali or Composite Supports for cryogenic applications, and can fabricate these out of machined block or poured to your specific needs. To better assist you please do not hesitate to call AAA Technology & Specialties Co., Inc. to tell us about your requirements in order to better serve you in your Pipe Support solutions.
4 AAA Technology & Specialties Co., Inc. Page 2 SHOE TYPES Choose from three designs of pipe shoe: 1) Split Beam T-Shoe; 2) Fabricated (from flat bar) T-Shoe; or 3) Double Upright T-Shoe. Each design, in turn, can be fabricated : 1) Plain; 2) With U-Bolts; or 3) With Clamps. Fig. 5000, 5010, & 5020 SPLIT BEAM T-SHOES Split Beam Plain Split Beam with U-Bolts Split Beam with Clamps Fig. 5100, 5110, 5120 FABRICATED T-SHOES Fabricated-Plain Fabricated with U-Bolts Fabricated with Clamps Fig. 5200, 5210, & 5220 DOUBLE UPRIGHT T-SHOES Double Upright Plain Double Upright with U-Bolts Double Upright with Clamps
5 Page 3 HOW TO ORDER T-Shoes are ordered by indicating the following dimensions and choices: Fig. Description of Pipe Shoe 5000 Split Beam T-Shoe 5010 Split Beam T-Shoe w/u-bolts 5020 Split Beam T-Shoe w/clamps 5100 Fabricated T-Shoe 5110 Fabricated T-Shoe w/u-bolts 5120 Fabricated T-Shoe w/clamps 5200 Double Upright T-Shoe 5210 Double Upright T-Shoe w/u-bolts 5220 Double Upright T-Shoe w/clamps Type S1 S2 S3 S4 GP Description of Slot Options No Slots Expansion Slots Insulation Band Slots Expansion Slots & Insulation Band Slots Gusset Plates Type Description of Guide Support NG No Guide CG Clip Guide AG Angle Guide AG2 Angle Guide 2 AG&ST Angle Guide and Line Stop Type T/T S/T S/P S/G G/G Description of Slide Bearings PTFE on PTFE Stainless Steel on PTFE Stainless Steel on Polyethylene Stainless Steel on Graphite Graphite on Graphite
6 AAA Technology & Specialties Co., Inc. Page 4 SLOT OPTION DETAIL Type S1, No Slots Type S2, Expansion Slots Type S3, Insulation Slots Type S4, Expansion & Insulation Slots Type GP, Gusset Plates
7 Page 5 GUIDE DETAIL Type NG, No Guide Type CG, Clip Guide Type AG, Angle Guide Type AG2, Angle Guide 2 Type AG&ST, Angle Guide & Line Stop
8 AAA Technology & Specialties Co., Inc. Page 6 SLIDE BEARING OPTION DETAIL Property T/T - PTFE on PTFE S/T - SS on PTFE S/P - SS on Polyethylene Compressive Strength Maximum Temperature G/G - Graphite on Graphite 2000 PSI 4000 PSI 1200 PSI 5625 PSI 300 F (150 C) 300 F (150 C) 200 F (95 C) 800 F (430 C) Option T/T, S/T and S/P Option G/G
9 Page 7 BASE PLATE DETAIL L Single Upright Shoes (e.g. Fig Double Upright Shoes (e.g. Fig 5000, 5100 etc.) 5200) Pipe Size T Type NG Type AG or AG2 Type CG Type NG Type AG or AG2 Type CG 2 1/4" or 3/8 or 1/2" 6 6 3/4 8 1/ /2 1/4" or 3/8 or 1/2" 6 6 3/4 8 1/ /4" or 3/8 or 1/2" 6 6 3/4 8 1/ /4" or 3/8 or 1/2" 6 6 3/4 8 1/ /4" or 3/8 or 1/2" 6 6 3/4 8 1/ /4" or 3/8 or 1/2" 6 6 3/4 8 1/ /4" or 3/8 or 1/2" 6 6 3/4 8 1/ /4 10 1/4 12 1/4" or 3/8 or 1/2" /4 12 1/ /4 12 1/4 14 1/4" or 3/8 or 1/2" /4 12 1/ /4 12 1/4 16 1/4" or 3/8 or 1/2" /4 12 1/ /4 14 1/4 18 1/4" or 3/8 or 1/2" /4 12 1/ /4 14 1/4 20 1/4" or 3/8 or 1/2" /4 14 1/ /4 16 1/4 24 1/4" or 3/8 or 1/2" /4 14 1/ /4 16 1/4 30 1/4" or 3/8 or 1/2" /2 20 1/4 21 3/4 36 1/4" or 3/8 or 1/2" /2 23 1/4 24 3/4 42 1/4" or 3/8 or 1/2" /2 26 1/4 27 3/4 Different lengths, widths and thicknesses available upon request. Type NG Base Plate Type AG or AG2 Base Plate Type CG Base Plate
10 Page info@aaatech.com FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig 5000 Pipe Shoe is to be welded to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A * * / / / / / / / / / / / / / / / / / / / / * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance.
11 AAA Technology & Specialties Co., Inc. Page 9 FIG APPLICATION: The Fig 5001 Pipe Shoe with End Gusset Plates is to be welded to the pipe along the top edges of the shoe and the gussets and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel with End Gussets of Plate. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG (All slot options are available with each pipe shoe) O.D. (in.) A * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. * * / / / / / / / / / / / / / / / / / / / /
12 Page FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * Unit Wt. * / / / / / / / / / / / / / / / / / / / / / / / / / / / / / * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance.
13 AAA Technology & Specialties Co., Inc. Page 11 FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * Unit Wt. * / / / / / / / / / / / / / / / / / / / / / / / / / / / / / * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance.
14 Page FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. * Unit Wt. * /2" 4 5 3/ / / /2" 4 5 7/ / " 4 5 3/ / / /8" /4" 4 6 1/ / /4" / / /4" 4 7 5/ / /4" 4 8 5/ / " 4 9 3/ / " / / " " " /2" "
15 AAA Technology & Specialties Co., Inc. Page 13 FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from a split beam of A-36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * /2" 4 5 3/ / / /2" 4 5 7/ / " 4 5 3/ / / /8" /4" 4 6 1/ / /4" / / /4" 4 7 5/ / /4" 4 8 5/ / " 4 9 3/ / " / / " " " /2" " * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. Unit Wt. *
16 Page FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe is to be welded to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. * * / / / / / / / / / / / / / / / / / / / /
17 AAA Technology & Specialties Co., Inc. Page 15 FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe with End Gusset Plates is to be welded to the pipe along the top edges and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See beginning of this section for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A * / / / / / / / / / / / / / / / / / / / / * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. *
18 Page FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * / / / / / / / / / / / / / / / / / / / / / / / / / / / / / * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. *
19 AAA Technology & Specialties Co., Inc. Page 17 FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * / / / / / / / / / / / / / / / / / / / / / / / / / / / / / * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. *
20 Page FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe is to be clamped to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * /2" 4 5 3/ / / /2" 4 5 7/ / " 4 5 3/ / / /8" /4" 4 6 1/ / /4" / / /4" 4 7 5/ / /4" 4 8 5/ / " 4 9 3/ / " / / " " " /2" " * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. *
21 AAA Technology & Specialties Co., Inc. Page 19 FIG (All slot options are available with each pipe shoe) APPLICATION: The Fig Pipe Shoe with End Gusset Plates is to be clamped to the pipe along the top edges and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed from two pieces of A-36 steel flat bar welded together. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. EXAMPLE: 3 - Fig x12 - S1 - T/T - AG O.D. (in.) A D * /2" 4 5 3/ / / /2" 4 5 7/ / " 4 5 3/ / / /8" /4" 4 6 1/ / /4" / / /4" 4 7 5/ / /4" 4 8 5/ / " 4 9 3/ / " / / " " " /2" " * - For pipe shoes larger than 24 NPS, contact AAAT for further assistance. *
22 AAA Technology & Specialties Co., Inc. Page 20 FIG DOUBLE UPRIGHT PIPE SHOE (All possible slot options pictured for information purposes only) APPLICATION: The Fig Shoe is to be welded to the pipe along the two top edges and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed of two braced vertical flat bars welded on a support flat bar of A-36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. EXAMPLE: 3 - Fig x12 - S1/GP - T/T - AG O.D. (in.) A * * / / / / / / /
23 Page 21 FIG DOUBLE UPRIGHT PIPE SHOE w/u-bolts (All possible slot options pictured for information purposes only) APPLICATION: The Fig Shoe is to be clamped to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed of two braced vertical flat bars welded on a support flat bar of A -36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. O.D. (in.) A D * / / / / / / * / / / /2 34 1/ /2 40 1/ /2 46 1/
24 AAA Technology & Specialties Co., Inc. Page 22 FIG DOUBLE UPRIGHT PIPE SHOE w/clamps (All possible slot options pictured for information purposes only) APPLICATION: The Fig Shoe is to be clamped to the pipe along the top edge and can also be welded to the base. CONSTRUCTION: The Pipe Shoe is constructed of two braced vertical flat bars welded on a support flat bar of A -36 steel. OPTIONAL FEATURES: The Pipe Shoe can be supplied in different TOS dimensions as well as different lengths. ORDERING: See Page 2 for ordering instructions. O.D. (in.) A D * * " 4 9 3/ / " / / " " " /2" / /2 57 1/
25 Page 23 FIG SPLIT BEAM PIPE SHOE (All possible slot options pictured for information purposes only) APPLICATION: The Fig Heavy Duty Pipe Saddle is used to support large diameter pipe. CONSTRUCTION: The Saddle is constructed of A-36 steel. FINISH: The Saddle can be provided with a black, painted or hot dip galvanized finish. OPTIONAL FEATURES: The Saddle can be supplied in different dimensions upon request. ORDERING: To order specify pipe size and figure number and desired finish. EXAMPLE: 20 - Fig Plain Pipe Size R (IN) A (IN) B WIDE STD. C (IN) T (IN) T2 (IN) T3 (IN) / /8 1/2 3/ /8 1/2 3/ / /8 1/2 3/ / /8 1/2 3/ /8 1/2 3/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/ /2 5/8 1/2 1/2
26 AAA TECHNOLOGY & SPECIALTIES CO., INC Brittmoore Road, Houston, Texas , U.S.A. Telephone: ; FAX: Website:
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationSECTION 230529 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 230529 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Steel pipe hangers and supports. 2. Metal framing systems. 3. Thermal-hanger shield inserts. 4. Fastener systems.
More informationWATER & SEWER CORROSIVE RESISTANT PRODUCTS
WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING
More information60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
More informationPTFE Slide Bearings 04/10 149
04/10 149 1.0 GENERAL INFORMATION In a wide range of applications, PTFE Slide bearings are superior to conventional expansion plates, rollers and rocker arm type supports. They support petrochemical plant,
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationPIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG
PIPE HANGERS AND SUPPORTS PRICE LIST AND CONDENSED CATALOG Price Sheet PH-11.15C Effective: November 30, 2015 Cancels Price Sheet PH-4.15C of April 5, 2015 FOR THE MOST CURRENT PRODUCT / PRICING INFORMATION
More informationPIPE SUPPORT & ALIGNMENT SYSTEM CATALOG
PIPE SUPPORT & ALIGNMENT SYSTEM CATALOG Catalog 611 The Fastest and Most Economical Method to Postion and Support Plumbing Chase Piping. The Sumner Pipe Support System is designed to eliminate the problems
More informationDiameter. Swift Lift Round Recess Plug. Note: The diameter of the narrow recess plug is the same as the diameter of the round recess plug.
P-5 The P-5 is hot forged from carbon steel. The formed head provis spherical seating that the Lifting Eye engages, while a disc-shaped foot is embedd in the concrete. Due to its being a forged part, the
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationValu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.
14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined
More informationLiftAlloy Chain Slings
CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/32" and 7/8"- /4" and 00 for 9/32"-3/4", are
More informationItem No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More informationDock Hardware & Accessory Products Catalog
Dock Hardware & Accessory Products Catalog Product Page # Product Page # Angle Brackets/Clips 8 Back Up Plate 5 Backing Plate/Hurricane Stop 10 Carriage Bolt Sets 4 Chain Retainer 10 Connector Pin Set
More informationSECTION 15076 CEMENT-MORTAR LINED AND COATED STEEL PIPE
SECTION 15076 CEMENT-MORTAR LINED AND COATED (CML&C) STEEL PIPE PART 1 GENERAL 1.01 DESCRIPTION This section designates the requirements for steel pipe fabrication, test in shop, installation of steel
More informationMueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION
Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationBased on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013
SimplexGrinnell TXMAS ecommerce Ferguson Fire and Fabrication Sprinkler Price List Based on SG GSA Fire & Security Products Contract GS-07F-0396M, Mod PO-0099 January 30, 2013 Product ID Description TXMAS
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationSIMPLE SAVER SYSTEM DESIGN MANUAL
SECTION 5: BAR JOIST CONSTRUCTION DETAILS SIMPLE SAVER SYSTEM DESIGN MANUAL Call Toll-free: 1-800-255-0776 Fax: 1-402-454-2708 E-mail us at: custserv@thermaldesign.com SIMPLE SAVER SYSTEM DESIGN MANUAL
More informationFisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
More informationEberl Iron Works, Inc.
Eberl Iron Works, Inc. Order Form Manual for Stair Pans, Stair Treads and Bent Plate NEW: VISIT US ONLINE AT WWW.STAIRPANS.COM Eberl Iron Works, Inc. 128 Sycamore St. Buffalo, NY 14204 Ph: 716-854-7633,
More informationASME Packaged Indirect Fired Water Heater
Utilizes Or HTHW To Heat Domestic Water, Semi-Instantaneous or Storage Type Model BW Features Reliable Only high grade materials used in construction to ensure long operating life Hydrastone cement lining
More informationSPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
More informationNEW CONNECTION INDUSTRIAL PRODUCTS NC.10V NC.20V NC.30V. NC. SD.10 NC. SD.20 NC. F.Clamp
Repair and Construction. Complete stainless steel pipe repair clamps to repair cracks, fractures, pin holes, torn sockets or welded tees, broken asbest-cement pipe coupling and more. Available for all
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationDRESSER TM PIPELINE SOLUTIONS
Wal-Rich Corporation is a master distributor of Dresser Pipeline Solutions, a trademark of GE. The following pages highlight the items that are in stock at our NY facility. For more information, please
More informationTECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE
TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General
More informationSolar Hot Water Heaters
Solar Hot Water Heaters Three High Vacuum Water inlet Stainless Steel screw Gel seal and insulation Water outlet Dust proof seals Non Pressure Models Details ASWH-1b ( Color Painted 304 ) ASWH-1c ( stainless
More informationSECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS
SECTION 26 05 49 VIBRATION AND SEISMIC CONTROLS FOR ELECTRICAL SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes seismic restraints and other earthquake-damage-reduction measures for electrical
More informationUltrasonic Reference Blocks
Ultrasonic Reference Blocks Custom and Standard Test Blocks for Nondestructive Testing Introduction 3 IIW Type 1 Calibration Block 4 Miniature Angle Beam (ROMPAS) Calibration Block 4 Distance Calibration
More informationThis mount uses concrete parking bumpers and a Davis tripod to create a mounting solution for nonpenetrable
NON-PENETRATING FLAT ROOF MOUNT Application Note 18 For Any Davis Weather Station Installed on a Mounting Tripod Introduction This application note describes various mounting solutions for non-penetrable
More informationThe Keep It Simple, Steel (KISS) Standard
The Keep It Simple, Steel (KISS) Standard A standard Electronic Data Interchange (EDI) format for the exchange of Bill of Material (BOM) information within the steel fabrication industry Updated in March
More informationAAA SUPPORTS PVT. LTD.
AAA SUPPORTS PVT. LTD. HEAD OFFICE & WORKS: 262, POR RAMANGAMDI, GIDC ESTATE, VADODARA, GUJARAT, INDIA PH: +91 265 2830444/ 2830445 / 2830446, FAX:+91 265 2830445 E Mail: sales@aaasupports.com salesaaaspl@gmail.com
More informationFittings REGULAR TENSION BANDS MEDIUM TENSION BANDS BEVELED TENSION BANDS
Fittings REGULAR TENSION BANDS 14 ga. x 3/4 1-3/8 010101 250.12 lb. 1-5/8 010102 250.14 lb. 1-7/8 010103 250.15 lb. 2-3/8 010104 250.18 lb. 2-7/8 010105 100.20 lb. 3 Full 010106 100.21 lb. 3-1/2 010107
More informationENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES
ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES PART 1 - GENERAL 1.1 SCOPE OF WORK SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED SQUARE TUBE LADDER
More informationIKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
More informationUniclass JP3:L782. CI/SfB (5-) ROOF-PRO SUPPORTS FOR BUILDING SERVICES AND ACCESS EQUIPMENT
Uniclass CI/SfB (5-) JP3:L782 ROOF-PRO S Y S T E M S SUPPORTS FOR BUILDING SERVICES AND ACCESS EQUIPMENT SUPPORTS FOR BUILDING SERVICES AND ACCESS EQUIPMENT THE SUSTAINABLE WAY TO SUPPORT BUILDING SERVICES
More informationTECHNICAL SPECIFICATION
THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,
More informationJCM GENERAL PRODUCT DIRECTORY Effective March 1, 2010 Replaces 01/12/2007
JCM GENERAL PRODUCT DIRECTORY Effective March 1, 20 Replaces 01//2007 UNIVERSAL CLAMP COUPLINGS / REPAIR FITTINGS Page 1 Universal Clamp Coupling - Standard Range...4-2 Universal Clamp Coupling - Extended
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationNEW HAMPSHIRE DEPARTMENT OF TRANSPORTATION BUREAU OF BRIDGE DESIGN BRIDGE DETAILS - REVISION HISTORY
1 of 10 10/1/2015 Revised note #3 to: Joint (behind backwall, brush Expansion joint opening shall be adjusted to curb) temperature anticipated just prior to pouring deck blockout. Final setting in the
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More informationHamilton Form Company, Ltd Custom Designs, Flexible Solutions
Hamilton Form Company, Ltd Custom Designs, Flexible Solutions 1 IFC 2 CUSTOM DESIGNS, FLEXIBLE SOLUTIONS Hamilton Form has been designing and building custom steel forms for the precast industry since
More informationDECIPHERING WELD SYMBOLS
DECIPHERING WELD SYMBOLS When welds are specified on engineering and fabrication drawings, a cryptic set of symbols issued as a sort of shorthand for describing the type of weld, its size, and other processing
More informationHydraulic Jack Units. Contact Us! 888-577-EECO (3326) Delivery & Lead Times
Hydraulic Jack Units Elevator Equipment Corporation (EECO) has been manufacturing hydraulic elevator equipment since 1946, and is one of the leading suppliers in the industry for hydraulic jack units and
More informationTABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
More informationVogt Valves The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22
The Connection Bulletin for Extended Body Forged Steel Valves Welded Bonnet, Bolted Bonnet, Class 800 & Class 1500 CB 22 Extended Body Forged Steel Valves An extended body gate valve specifically designed
More informationSECTION 1 GENERAL REQUIREMENTS
Page 1 of 6 SECTION 1 GENERAL REQUIREMENTS 1. SCOPE OF WORK: The work to be performed under the provisions of these documents and the contract based thereon includes furnishing all labor, equipment, materials,
More informationPreformed Metal Roofing and Siding
Page -1-1. GENERAL 1.1. Description This specification along with the drawings covers the furnishing of all material, products, equipment, accessories, tools, services, transportation, labor and supervision
More informationFlanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
More informationA Table of the Most Common Standard Pipe Sizes. Nominal Bore 1/2 inch (DN 15 mm), Outside Diameter 21.34 mm
Standard Pipe Sizes Standard Pipe Sizes Except for specialist applications, commercially available pipe comes in standard sizes. Pipes in a variety of materials - including carbon steel, steel alloys,
More informationPump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationCommercial Storage Tanks
Commercial Storage Tanks ALL THE STORAGE CHOICES YOU NEED FOR A TOTAL HOT WATER SUPPLY SYSTEM. INNOVATION AT A GLANCE A. O. SMITH IS THE BEST CHOICE FOR COMPLETE COMMERCIAL WATER HEATING AND STORAGE SYSTEMS
More informationThe Augustus Group Products Projects and Engineering Consulting. ASME BOILER AND PRESSURE VESSEL CODE Mike Looram
The Augustus Group Products Projects and Engineering Consulting ASME BOILER AND PRESSURE VESSEL CODE Mike Looram ASME B&PV CODE SECTION VIII DIV. 1 Bolted Flanges With Ring Type Gaskets Stress Calculations
More informationFLEXIBLE SOLUTIONS FOR FLUIDS AND GASES
FLEXIBLE SOLUTIONS FOR FLUIDS AND GASES www.amnitec.nl AmniTec B.V., Rotterdam, is part of a group of companies called United Flexible with an annual turnover of $ 70 Million and 5 operating facilities
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationSpecification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe
Specification for Pipe Bursting Gravity Sewer Mains with HDPE Pipe 1. GENERAL The following supplemental sewer main specifications are intended to address the installation of high-density polyethylene
More informationSECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT
SECTION 23 05 29 - HANGERS AND SUPPORTS FOR HVAC PIPING AND EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe hangers and supports. 2. Hanger rods. 3. Inserts. 4. Flashing. 5. Equipment
More informationSIGRAFLEX EMAIL. Properties. Applications
Multilayer sealing sheet, adhesive-free made from flexible graphite foil reinforced with stainless steel foils especially for use in PTFE envelope gaskets SIGRAFLEX EMAIL has been developed specially for
More informationBaumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationCellar Tech Containment Well Cellar Systems www.cellartech.com
Sealed Well Cellars are protected by US patent 7637692, 7987904, 8127837, and 8256505. Additional US patents pending. Basic Containment Well Cellar Sealed Well Cellars are protected by US patent 7637692,
More informationPBM has solutions for your valve application.
valve solutions i n d u s t r i a l v a l v e s Whether the application is in a chemical plant, paper mill, food plant, manufacturing environment, or other industrial setting, PBM S line of Industrial
More informationSERIES ASM NEOPRENE/EPMD FLANGED SINGLE SPHERE CONNECTOR CONNECTORS. Pressures to 225 PSIG (15.51 barg) Temperatures to 230ºF (110ºC)
APPLICATIONS Process Industry Weak Acids Alkalies Compressed Air Pulp & Paper MODELS ASM - Flanged Connection OPTIONS Control Rods Oil & Gas Water & Waste Pump suction & discharge Sea water Chemical lines
More informationC. CR: Chlorosulfonated polyethylene synthetic rubber. E. EPDM: Ethylene-propylene-diene terpolymer rubber.
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.
More informationwww.klmtechgroup.com TABLE OF CONTENT
Page : 1 of 16 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia ORIFICE FLANGES TABLE OF CONTENT SCOPE
More informationLadder Shelf Plans Final dimensions: 25 L x 21 W x 72 H
Ladder Shelf Plans Final dimensions: 25 L x 21 W x 72 H Copyright 2011. MLCS Woodworking. Page 1 Router bits and supplies needed: 3/8 Rabbeting bit (#10691) 1 Bottom Cleaning bit (#7941) Top and Bottom
More informationSince 1978. HMT Inc. 24 Waterway Avenue, Suite 400 The Woodlands, Texas 77380 Ph: +1.281.681.7000 Fax: +1.281.419.7689
WaTER & wastewater HMT Inc. 24 Waterway Avenue, Suite 400 The Woodlands, Texas 77380 Ph: +1.281.681.7000 Fax: +1.281.419.7689 Locations worldwide to service all your needs. VAPORVAULT and ALUMINATOR are
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More information1-Way Bracket Assemblies
-Way Bracket Assemblies The Astro-Brac in its various configurations is a truly universal system for mounting signals. The Astro-Brac is designed to facilitate the mounting of any size or combination of
More informationAMERICAN GOTHIC PLAYHOUSE
AMERICAN GOTHIC PLAYHOUSE Project Plan #856 Sheet 1 of 5 Pick a spot and get started with the beautiful that your kids will love. The design of the playhouse includes 35 square feet of interior space plus
More informationLight Duty Commercial Electric Water Heater
Features Heavy Duty Construction Hydrastone cement lining provides longer tank life Copper-silicon tappings cannot rust or corrode High impact composite jacket eliminates damage during installation and
More informationCAMERA MTGS. Astro-Brac 1-Piece Camera Bracket Stellar Series
Astro-Brac 1-Piece Camera Bracket Stellar Series AS-3004 SH-0514 SH-0514 Stellar Series Mount, Alum AS-0170 - - - 46=46 : 29, 36, 42, 48, 56, 72, 84, 96, or 114. Specify by including -SS in the part number,
More informationEHV CONNECTORS EHV TERMINALS ACFS (EHV)... ALUMINUM BOLTED TUBE TO FLAT PAD, SHORT...EHV-7
CONNECTORS TERMINALS ACF ()... BOLTED TUBE TO FLAT PAD...- ACFS ()... BOLTED TUBE TO FLAT PAD, SHORT...-7 CCL-... COMPRESSION TUBE TO FLAT PAD...- CCLS-... COMPRESSION TUBE TO FLAT PAD, SHORT... - EVKET...
More informationSECTION 11014 WINDOW WASHING SYSTEMS
SECTION 11014 WINDOW WASHING SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section includes, but is not limited to, design and furnishing portable davits, davit sleeves, dvit bases, four (4) removable outriggers,
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases help make the traffic signal aesthetically pleasing to the eye. Available for various pole diameters and multiple finish options. Ornamental
More informationThe world leader in conveyor pulleys
The world leader in conveyor pulleys You ask. We Deliver. Chantland pulleys and rollers come in virtually any diameter, wall thickness, length, shaft size or end type. They re built from stainless steel,
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More informationDo-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow
Do-It-Yourself- Hydraulic Press Make Your Own, by Marshel Rossow This press can be built from readily available metal. Materials and dimensions need not be exactly what is shown here. Much of the material
More informationFord Service Saddles and Tapping Sleeves
THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast
More informationWORKPLACE SHELVING STORAGE RACKS SHOP FURNITURE & SPECIALTY STORAGE
WORKPLACE SHELVING STORAGE RACKS SHOP FURNITURE & SPECIALTY STORAGE Look to Tri-Boro for: Outstanding Quality Affordable Pricing & Ontime Delivery Online PDF Catalog Pages Tri-Boro Shelving and Partition
More informationSpeed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
More informationHANDRAIL STANDARDS HANDRAILS AXESS LADDER SYSTEM KICK FLAT SYSTEM OPEN FLOORING
ENGINEERING LTD. HANDRAIL STANDARDS HANDRAILS AXESS LADDER SYSTEM KICK FLAT SYSTEM OPEN FLOORING Member of PF Group Guardrail Engineering Limited Manders Industrial Estate Old Heath Road Wolverhampton
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More informationResidential Deck Safety, Construction, and Repair
Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the
More informationINSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS
INSTALLATION INSTRUCTIONS HUSTLER 4-BTV, 5-BTV TRAP VERTICAL WARNING INSTALLATION OF THIS PRODUCT NEAR POWER LINES IS DANGEROUS FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS GENERAL DESCRIPTION:
More informationInstallation Instructions Hustler 6-BTV Trap Vertical
Installation Instructions Hustler 6-BTV Trap Vertical ASSEMBLY 1. Check the package contents against the parts list on page 2. 2. WARNING. Installation of this product near power lines is dangerous. For
More informationType 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
More informationSelect Radiators Installation Guide
Select Radiators Installation Guide Table of Contents Informational Symbols...3 Before You Begin...4 Select Rough-In... 5 Connection Installation...6 Optional Piping Arrangements...7 Conventional Wall
More informationCENTRIFUGAL CASTING. Email: amitjoshi@iitb.ac.in amitjoshi1000@yahoo.ca
CENTRIFUGAL CASTING Amit M Joshi (B.Engg. Mechanical, A.M.I.Prod.E, A.I.E) Dept. of Metallurgical Engg. & Material Science, Indian Institute of Technology Bombay, India. Email: amitjoshi@iitb.ac.in amitjoshi1000@yahoo.ca
More informationDIVERSIFICATION INTEGRITY MARKETS SERVED BUILT ON BUILT ON
BUILT ON DIVERSIFICATION Saulsbury Industries is a full-service Engineering, Procurement and Construction (EPC) contractor that has provided engineering, general construction, and electrical and maintenance
More informationBolted Connectors & Terminals
Disconnect Tee Connecr Type ADT5 75 Body 90 Nom. Function: ADT connecrs provide a convenient means of connecting lugged service conducrs overhead mains conducrs. Construction: Body - High strength cast
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationengineering flexible and rigid holders
Doctoring systems engineering GOOD DOCTORING IS ESSENTIAL FOR EFFICIENT PAPERMAKING! The proper design and application of a doctoring system can improve the performance of your paper machine. BONETTI doctoring
More information