TSC Series, Compensated/Unamplified ±60 mbar to ±10 bar ±6 kpa to ±1 MPa ±1 psi to ±150 psi Millivolt Analog Output

Size: px
Start display at page:

Download "TSC Series, Compensated/Unamplified ±60 mbar to ±10 bar ±6 kpa to ±1 MPa ±1 psi to ±150 psi Millivolt Analog Output"

Transcription

1 TruStability Board Mount Pressure Sensors TSC Series, Compensated/Unamplified ±60 mbar to ±0 bar ±6 kpa to ± MPa ± psi to ±50 psi Millivolt Analog Output NSC Series, Uncompensated/Unamplified ±2.5 mbar to ±0 bar ±250 Pa to ± MPa ± inh 2 O to ±50 psi Millivolt Analog Output Datasheet

2 TruStability Board Mount Pressure Sensors Honeywell s TruStability TSC Series and NSC Series are piezoresistive silicon pressure sensors offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. TSC Series: Temperature compensated and unamplified. Compensation makes it easier to integrate the sensor into a system by eliminating the need to calibrate the system over temperature and also offers reduced part-to-part variation. Compensated temperature range is 0 C to 85 C [-32 F to 85 F]. Operating temperature range is -40 C to 85 C [-40 F to 85 F]. Measures differential or gage pressures NSC Series: Uncompensated and unamplified. Allows customers the flexibility of performing their own calibration while still benefiting from the industry-leading stability, accuracy, and repeatability that the Honeywell TruStability Pressure Sensors provide. Operates as specified from -40 C to 85 C [-40 F to 85 F]. Measures absolute, differential or gage pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Differential versions allow measurement of pressure between two pressure ports. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. The TSC Series and NSC Series sensors are intended for use with non-corrosive, non-ionic gases, such as air. Port can also be used for non-corrosive, non-ionic liquids on sensors rated above 60 mbar 6 kpa psi. The TSC and NSC Series offer numerous package styles and mounting options, making it easier for device manufacturers to integrate the product into their applications. These sensors offer infinite resolution on the pressure signal. Frequency response is also typically limited only by the end user s system. All products are designed and manufactured according to ISO 900. Table of Contents Features and Benefits Potential Applications...5 TSC Series and NSC Series General Specifications TSC Series Nomenclature and Order Guide..8 NSC Series Nomenclature and Order Guide..9 TSC Series Pressure Range Specifications ±60 mbar to ±0 bar...0 ±6 kpa to ± MPa... ± psi to ±50 psi...2 NSC Series Pressure Range Specifications ±2.5 mbar to ±0 bar....3 ±250 Pa to ± MPa...4 ± inh 2O to ±50 psi...5 Available Standard Configurations Dimensional Drawings DIP Packages SMT Packages SIP Packages Pinouts, PCB Layouts, Circuit Examples...29 TruStability Board Mount Pressure Sensors Portfolio Overview...30 Additional Information back cover 2 sensing.honeywell.com What makes our sensors better? Stability and reliability you can count on Industry-leading accuracy down to ±0.5 %FSS BFSL Port and housing options simplify integration Wide pressure range from ±2.5 mbar to ±0 bar ±250 Pa to ± MPa ± inh 2 O to ±50 psi Small package size Low power consumption stability accuracy flexibility Small size

3 Features and Benefits Industry-leading long-term stability Even after long-term use and thermal extremes, these sensors perform substantially better relative to stability than any other pressure sensor available in the industry today: Minimizes system calibration needs and maximizes system performance. Helps support system uptime by eliminating the need to service or replace the sensor during its application life. Industry-leading accuracy Extremely tight accuracy down to ±0.5 %FSS BFSL: Reduces software needed to correct system inaccuracies, minimizing system design time. Supports system accuracy and warranty requirements. Minimizes system calibration and design needs; supports system uptime. Industry-leading flexibility Modular, flexible design with numerous package styles, pressure ports, and options simplifies integration into the device manufacturer s application. Single side wet media allows the end customer to use one port of the sensor with condensing humidity or directly with non-corrosive liquid media. Simplifies product integration. INsensitive to MOUNTING ORIENTATION Allows flexibility of use within the application. Small size Miniature 0 mm x 0 mm [0.39 in x 0.39 in] package is very small when compared to most board mount pressure sensors: Occupies less area on the PCB. Typically allows for easy placement on crowded PCBs or in small devices. Repeatability Provides excellent repeatability, high accuracy and reliability under many demanding conditions. Supports lean manufacturing J-STD-020-D MSL unlimited shelf life after packaging is opened. System can be calibrated within one hour after reflow solder. Compatible with modern lead-free and no-clean solder processes. sensing.honeywell.com 3

4 Features and Benefits Extremely low power consumption Operating supply voltage as low as.5 Vdc. Reduces power consumption, provides extended battery life, and promotes energy efficiency. Absolute, differential and gage types Provides flexibility of use within the application. Absolute type on NSC Series only. Pressure ranges from ±2.5 Mbar to ±0 bar ±250 Pa to ± MPa ± inh 2 O to ±50 psi Optimizes the customer s system performance by maximizing pressure resolution with more available pressure ranges. RoHS AND ISO900 COMPLIANCE 4 sensing.honeywell.com

5 Potential Applications MEDICAL NEbulizers spirometers PATIENT MONITORING EQUIPMENT Therapeutic Hospital Beds Hospital Gas Supply OXygen Concentrators Blood analysis gas chromatography analytical instruments INDUSTRIAL valves pumps ACTuators HVAC transmitters automated pneumatic assembly equipment pneumatic operator control systems Industrial Gas SUpply Barometry gas chromatography analytical instrument sampling systems sensing.honeywell.com 5

6 TSC Series and NSC Series General Specifications Table. Absolute Maximum Ratings Characteristic Unit Supply voltage (V supply ) 2 : pressure ranges >60 mbar 6 kpa psi pressure ranges <40 mbar 4 kpa 20 inh 2 O Vdc Storage temperature -40 [-40] 85 [85] C [ F] Soldering time and temperature: lead solder temperature (SIP, DIP) peak reflow temperature (SMT) Absolute maximum ratings are the extreme limits the device will withstand without damage. 2 Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure. 4 s max. at 250 C [482 F] 5 s max. at 250 C [482 F] Table 2. Operating Specifications Characteristic Typ. Unit Supply voltage (V supply ):, 2 pressure ranges >60 mbar 6 kpa psi pressure ranges <40 mbar 4 kpa 20 H 2 O Vdc Supply current (at 5.0 Vdc supply) TSC Series NSC Series ma Operating temperature range 3-40 [-40] 85 [85] C [ F] TSC Series compensated temperature range 4 0 [32] 85 [85] C [ F] Startup time 5 ms TSC Series output resistance 2.5 kohm Ratiometricity of the sensor (the ability of the device output to scale to the supply voltage) is achieved within the specified operating voltage. 2 Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure. 3 Operating temperature range: The temperature range over which the sensor will produce an output proportional to pressure. 4 Compensated temperature range: The temperature range over which the sensor will produce an output proportional to pressure within the specified performance limits. Table 3. Environmental Specifications Characteristic Humidity Vibration Shock Life Solder reflow Parameter 0% to 95% RH, non-condensing MIL-STD-202G, Method 204D, Condition B (5 g, 0 Hz to 2 khz) MIL-STD-202G, Method 23B, Condition C (00 g, 6 ms duration) million pressure cycles minimum J-STD-020-D MSL (unlimited shelf life when stored at less than 30 C and 85 %RH) Life may vary depending on the specific application in which the sensor is utilized. 6 sensing.honeywell.com

7 TSC Series and NSC Series General Specifications Table 4. Wetted Materials Component Port (Pressure Port) Port 2 (Reference Port) Ports and covers high temperature polyamide high temperature polyamide Substrate alumina ceramic alumina ceramic Adhesives epoxy, RTV epoxy, RTV Electronic components silicon silicon, glass, gold Contact Honeywell Customer Service for detailed material information. CAUTION PRODUCT DAMAGE Ensure liquid media is applied to Port only; Port 2 is not compatible with liquids. Ensure liquid media contains no particulates. All TruStability sensors are dead-ended devices. Particulates can accumulate inside the sensor, causing damage or affecting sensor output. Recommend that the sensor be positioned with Port facing downwards; any particulates in the system are less likely to enter and settle within the pressure sensor if it is in this position. Ensure liquid media does not create a residue when dried; build-up inside the sensor may affect sensor output. Rinsing of a dead-ended sensor is difficult and has limited effectiveness for removing residue. Ensure liquid media are compatible with wetted materials. Non-compatible liquid media will degrade sensor performance and may lead to sensor failure. Failure to comply with these instructions may result in product damage. Table 5. Sensor Pressure Types Pressure Type Absolute Description Output is proportional to the difference between applied pressure and a built-in reference to vacuum. Differential Output is proportional to the difference between the pressures applied to each port (Port Port 2). Gage Output is proportional to the difference between applied pressure and atmospheric (ambient) pressure. sensing.honeywell.com 7

8 TSC Series Nomenclature and Order Guide Figure. TSC Series Nomenclature and Order Guide For example, TSCDNNN50PGUCV defines a TSC Series TruStability Pressure Sensor, DIP package, NN pressure port, no special options,50 psi gage pressure range, unamplified, compensated, constant supply voltage. T S C D N N N 5 0 P G U C V Series Supply Voltage TSC Compensated/Unamplified V Constant Package D DIP (Dual Inline Pin) M SMT (Surface Mount Technology) S SIP (Single Inline Pin) Pressure Port DIP NN AN LN RN RR DR No ports Single axial barbed port Single axial barbless port Single radial barbed port barbed ports, same side barbed ports, opposite sides NN AN LN RN RR DR SMT No ports Single axial barbed port Single axial barbless port Single radial barbed port barbed ports, same side barbed ports, opposite sides NN AA AN LN FF SIP Dual axial barbed ports, opposite sides Fastener mount, dual axial barbed ports, opposite sides FN Fastener mount, single axial barbed port GN Ribbed fastener mount, single axial barbed port NB No ports Single axial barbed port Single axial barbless port Fastener mount, dual axial ports, same side Single radial RN barbed port RR barbed ports, same side 008B DR barbed ports, opposite sides Pressure Range 60 mbar to 0 bar Differential 060MD ±60 mbar 00MD ±00 mbar 60MD ±60 mbar 250MD ±250 mbar 400MD ±400 mbar 600MD ±600 mbar 00BD ± bar.6bd ±.6 bar 2.5BD ±2.5 bar 004BD ±4 bar 006BD ±6 bar 00BD ±0 bar Gage 060MG 0 mbar to 60 mbar 00MG 0 mbar to 00 mbar 60MG 0 mbar to 60 mbar 250MG 0 mbar to 250 mbar 400MG 0 bar to 400 mbar 600MG 0 bar to 600 mbar 00BG 0 bar to bar.6bg 0 bar to.6 bar 2.5BG 0 bar to 2.5 bar 004BG 0 bar to 4 bar 006BG 0 bar to 6 bar 00BG 0 bar to 0 bar 6 kpa to MPa Differential 006KD ±6 kpa 00KD ±0 kpa 06KD ±6 kpa 025KD ±25 kpa 040KD ±40 kpa 060KD ±60 kpa 00KD ±00 kpa 60KD ±60 kpa 250KD ±250 kpa 400KD ±400 kpa 600KD ±600 kpa 00GD ± MPa Gage 006KG 0 kpa to 6 kpa 00KG 0 kpa to 0 kpa 06KG 0 kpa to 6 kpa 025KG 0 kpa to 25 kpa 040KG 0 kpa to 40 kpa 060KG 0 kpa to 60 kpa 00KG 0 kpa to 00 kpa 60KG 0 kpa to 60 kpa 250KG 0 kpa to 250 kpa 400KG 0 kpa to 400 kpa 600KG 0 kpa to 600 kpa 00GG 0 kpa to MPa Compensation C Compensated Output Type U Unamplified psi to 50 psi Differential 00PD ± psi 005PD ±5 psi 05PD ±5 psi 030PD ±30 psi 060PD ±60 psi 00PD ±00 psi 50PD ±50 psi Gage 00PG 0 psi to psi 005PG 0 psi to 5 psi 05PG 0 psi to 5 psi 030PG 0 psi to 30 psi 060PG 0 psi to 60 psi 00PG 0 psi to 00 psi 50PG 0 psi to 50 psi JN Single radial barbless port JN Single radial barbless port Single radial JN barbless port JJ barbless ports, same side JJ barbless ports, same side JJ barbless ports, same side HH Fastener mount, dual radial barbed ports, same side HN Fastener mount, single radial barbed port MN Manifold mount, outer diameter seal SN Manifold mount, inner diameter seal Options N No special options See Table 5 for an explanation of sensor pressure types. 8 sensing.honeywell.com

9 NSC Series Nomenclature and Order Guide Figure 2. NSC Series Nomenclature and Order Guide For example, NSCDNNN50PGUNV defines an NSC Series TruStability Pressure Sensor, DIP package, NN pressure port, no special options,50 psi gage pressure range, unamplified, uncompensated, constant supply voltage. N S C D N N N 5 0 P G U N V Series NSC Uncompensated/Unamplified Package D DIP (Dual Inline Pin) M SMT (Surface Mount Technology) S SIP (Single Inline Pin) Pressure Port DIP NN AN LN RN RR DR JN JJ Options N No ports Single axial barbed port Single axial barbless port Single radial barbed port barbed ports, same side barbed ports, opposite sides Single radial barbless port barbless ports, same side No special options NN AN LN RN RR DR JN JJ SMT No ports Single axial barbed port Single axial barbless port Single radial barbed port barbed ports, same side barbed ports, opposite sides Single radial barbless port barbless ports, same side NN AA AN LN FF SIP Dual axial barbed ports, opposite sides Fastener mount, dual axial barbed ports, opposite sides FN Fastener mount, single axial barbed port GN Ribbed fastener mount, single axial barbed port NB Fastener mount, dual axial ports, same side Single radial RN barbed port HH No ports Single axial barbed port Single axial barbless port RR barbed ports, same side Fastener mount, dual radial barbed ports, same side HN Fastener mount, single radial barbed port MN Manifold mount, outer diameter seal SN Manifold mount, inner diameter seal 008B DR barbed ports, opposite sides Single radial JN barbless port JJ barbless ports, same side Pressure Range 2.5 mbar to 0 bar Absolute 00BA 0 bar to bar.6ba 0 bar to.6 bar 2.5BA 0 bar to 2.5 bar 004BA 0 bar to 4 bar 006BA 0 bar to 6 bar 00BA 0 bar to 0 bar Differential 2.5MD ±2.5 mbar 004MD ±4 mbar 006MD ±6 mbar 00MD ±0 mbar 06MD ±6 mbar 025MD ±25 mbar 040MD ±40 mbar 060MD ±60 mbar 00MD ±00 mbar 60MD ±60 mbar 250MD ±250 mbar 400MD ±400 mbar 600MD ±600 mbar 00BD ± bar.6bd ±.6 bar 2.5BD ±2.5 bar 004BD ±4 bar 006BD ±6 bar 00BD ±0 bar Gage 004MG 006MG 00MG 06MG 025MG 040MG 060MG 00MG 60MG 250MG 400MG 600MG 00BG.6BG 2.5BG 004BG 006BG 00BG 0 mbar to 4 mbar 0 mbar to 6 mbar 0 mbar to 0 mbar 0 mbar to 6 mbar 0 mbar to 25 mbar 0 mbar to 40 mbar 0 mbar to 60 mbar 0 mbar to 00 mbar 0 mbar to 60 mbar 0 mbar to 250 mbar 0 bar to 400 mbar 0 bar to 600 mbar 0 bar to bar 0 bar to.6 bar 0 bar to 2.5 bar 0 bar to 4 bar 0 bar to 6 bar 0 bar to 0 bar 400 Pa to MPa 00KA 60KA 250KA 400KA 600KA 00GA Differential 250LD ±250 Pa 400LD ±400 Pa 600LD ±600 Pa 00KD ± kpa.6kd ±.6 kpa 2.5KD ±2.5 kpa 004KD ±4 kpa 006KD ±6 kpa 00KD ±0 kpa 06KD ±6 kpa 025KD ±25 kpa 040KD ±40 kpa 060KD ±60 kpa 00KD ±00 kpa 60KD ±60 kpa 250KD ±250 kpa 400KD ±400 kpa 600KD ±600 kpa 00GD ± MPa Gage 400LG 600LG 00KG.6KG Absolute 0 kpa to 00 kpa 0 kpa to 60 kpa 0 kpa to 250 kpa 0 kpa to 400 kpa 0 kpa to 600 kpa 0 kpa to MPa 0 Pa to 400 Pa 0 Pa to 600 Pa 0 kpa to kpa 0 kpa to.6 kpa 004KG 0 kpa to 4 kpa 006KG 0 kpa to 6 kpa 00KG 0 kpa to 0 kpa 06KG 0 kpa to 6 kpa 025KG 0 kpa to 25 kpa 040KG 0 kpa to 40 kpa 060KG 0 kpa to 60 kpa 00KG 0 kpa to 00 kpa 60KG 0 kpa to 60 kpa 250KG 0 kpa to 250 kpa 400KG 0 kpa to 400 kpa 600KG 0 kpa to 600 kpa 00GG 0 kpa to MPa in H 2O to 50 psi 05PA 030PA 060PA 00PA 50PA Supply Voltage V Constant Compensation N Uncompensated Output Type U Unamplified Absolute 0 psi to 5 psi 0 psi to 30 psi 0 psi to 60 psi 0 psi to 00 psi 0 psi to 50 psi Differential 00ND ± inh2o 002ND ±2 inh2o 004ND ±4 inh2o 005ND ±5 inh2o 00ND ±0 inh2o 020ND ±20 inh2o 030ND ±30 inh2o 00PD ± psi 005PD ±5 psi 05PD ±5 psi 030PD ±30 psi 060PD ±60 psi 00PD ±00 psi 50PD ±50 psi Gage 002NG 0 inh2o to 2 inh2o 004NG 0 inh2o to 4 inh2o 005NG 0 inh2o to 5 inh2o 00NG 0 inh2o to 0 inh2o 020NG 0 inh2o to 20 inh2o 030NG 0 inh2o to 30 inh2o 00PG 0 psi to psi 005PG 0 psi to 5 psi 05PG 0 psi to 5 psi 030PG 0 psi to 30 psi 060PG 0 psi to 60 psi 00PG 0 psi to 00 psi 50PG 0 psi to 50 psi See Table 5 for an explanation of sensor pressure types. sensing.honeywell.com 9

10 TSC Series Specifications ±60 mbar to ±0 bar Table 6. TSC Series Pressure Range Specifications for ±60 mbar to ±0 bar Pressure Range Order Code (see Figure ) Pressure Range Pmin. Pmax. Unit Over Pressure Burst Pressure Common Mode Pressure Pressure Accuracy Offset (mv/v) Full Scale Span (mv/v) Thermal Effect on Offset 2 0 C to 50 C 0 C to 85 C Thermal Effect on Span 3 0 C to 50 C 0 C to 85 C Long-Term Stability 000 hr, 25 C Thermal Hysteresis 4 Differential 060MD mbar ±0.20 ± ±0.60 ±.5 ±.00 ±2.00 ±0.5 ±0.5 00MD mbar ±0.20 ± ±0.35 ±0.70 ±.00 ±2.00 ±0.0 ±0.0 60MD mbar ±0.5 ± ±0.80 ±.65 ±0.75 ±2.00 ±0.0 ± MD mbar ±0.5 ± ±0.55 ±.05 ±0.75 ±2.00 ±0.0 ± MD mbar ±0.5 ± ±0.35 ±0.65 ±0.75 ±2.00 ±0.0 ± MD mbar ±0.5 ± ±0.40 ±0.85 ±0.50 ±.25 ±0.0 ±0.0 00BD - bar ±0.5 ± ±0.25 ±0.50 ±0.50 ±.25 ±0.0 ±0.0.6BD bar ±0.5 ± ±0.5 ±0.30 ±0.50 ±.25 ±0.0 ± BD bar ±0.5 ± ±0.20 ±0.40 ±0.50 ±.50 ±0.0 ± BD -4 4 bar ±0.5 ± ±0.25 ±0.50 ±0.50 ±.25 ±0.0 ± BD -6 6 bar ±0.5 ± ±0.35 ±0.50 ±0.50 ±.00 ±0.0 ±0.0 00BD -0 0 bar ±0.5 ± ±0.20 ±0.3 ±0.5 ±.00 ±0.0 ±0.0 Gage 060MG 0 60 mbar ±0.20 ± ±.5 ±2.35 ±.00 ±2.00 ±0.30 ± MG 0 00 mbar ±0.20 ± ±0.70 ±.40 ±.00 ±2.00 ±0.20 ± MG 0 60 mbar ±0.5 ± ±.65 ±3.30 ±0.75 ±2.00 ±0.20 ± MG mbar ±0.5 ± ±.05 ±2.0 ±0.75 ±2.00 ±0.5 ± MG mbar ±0.5 ± ±0.65 ±.30 ±0.75 ±2.00 ±0.0 ± MG mbar ±0.5 ± ±0.85 ±.65 ±0.50 ±.25 ±0.5 ±0.5 00BG 0 bar ±0.5 ± ±0.50 ±.00 ±0.50 ±.25 ±0.0 ±0.0.6BG 0.6 bar ±0.5 ± ±0.30 ±0.65 ±0.50 ±.25 ±0.0 ± BG bar ±0.5 ± ±0.40 ±0.80 ±0.50 ±.50 ±0.0 ± BG 0 4 bar ±0.5 ± ±0.50 ±.00 ±0.50 ±.25 ±0.0 ± BG 0 6 bar ±0.5 ± ±0.65 ±.00 ±0.50 ±.00 ±0.5 ±0.5 00BG 0 0 bar ±0.5 ± ±0.40 ±0.60 ±0.50 ±.00 ±0.0 ±0.0 Offset: The output signal obtained when the reference pressure is applied to all available pressure ports. Also known as null or zero. 2 Thermal effect on offset: The deviation in offset due to changes in temperature over the compensated temperature range, relative to offset measured at 25 ºC. 3 Thermal effect on span: The deviation in full scale span due to changes in temperature over the compensated temperature range, relative to full scale span measured at 25 ºC. 4 Thermal hysteresis: The maximum difference between output readings when the same temperature is reached consecutively, under the same operating conditions, with temperature approaching from opposite directions within the operating temperature range. Validated over the full operating temperature and pressure ranges using a ~5 ºC/minute ramp and 30 minute dwell. Application performance may be affected by the thermal mass of the end user system. 0 sensing.honeywell.com

11 TSC Series Specifications ±6 kpa to ± MPa Table 7. TSC Series Pressure Range Specifications for ±6 kpa to ± MPa Pressure Range Order Code (see Figure ) Pressure Range Pmin. Pmax. Unit Over Pressure Burst Pressure Common Mode Pressure Pressure Accuracy Offset (mv/v) Full Scale Span (mv/v) Thermal Effect on Offset 2 0 C to 50 C 0 C to 85 C Thermal Effect on Span 3 0 C to 50 C 0 C to 85 C Long-Term Stability 000 hr, 25 C Thermal Hysteresis 4 Differential 006KD -6 6 kpa ±0.20 ± ±0.60 ±.5 ±.00 ±2.00 ±0.5 ±0.5 00KD -0 0 kpa ±0.20 ± ±0.35 ±0.70 ±.00 ±2.00 ±0.0 ±0.0 06KD -6 6 kpa ±0.5 ± ±0.80 ±.65 ±0.75 ±2.00 ±0.0 ± KD kpa ±0.5 ± ±0.55 ±.05 ±0.75 ±2.00 ±0.0 ± KD kpa ±0.5 ± ±0.35 ±0.65 ±0.75 ±2.00 ±0.0 ± KD kpa ±0.5 ± ±0.40 ±0.85 ±0.50 ±.25 ±0.0 ±0.0 00KD kpa ±0.5 ± ±0.25 ±0.50 ±0.50 ±.25 ±0.0 ±0.0 60KD kpa ±0.5 ± ±0.5 ±0.30 ±0.50 ±.25 ±0.0 ± KD kpa ±0.5 ± ±0.20 ±0.40 ±0.50 ±.50 ±0.0 ± KD kpa ±0.5 ± ±0.25 ±0.50 ±0.50 ±.25 ±0.0 ± KD kpa ±0.5 ± ±0.35 ±0.50 ±0.50 ±.00 ±0.0 ±0.0 00GD - MPa ±0.5 ± ±0.20 ±0.30 ±0.50 ±.00 ±0.0 ±0.0 Gage 006KG 0 6 kpa ±0.20 ± ±.5 ±2.35 ±.00 ±2.00 ±0.30 ± KG 0 0 kpa ±0.20 ± ±0.70 ±.40 ±.00 ±2.00 ±0.20 ± KG 0 6 kpa ±0.5 ± ±.65 ±3.30 ±0.75 ±2.00 ±0.20 ± KG 0 25 kpa ±0.5 ± ±.05 ±2.0 ±0.75 ±2.00 ±0.5 ± KG 0 40 kpa ±0.5 ± ±0.65 ±.30 ±0.75 ±2.00 ±0.0 ± KG 0 60 kpa ±0.5 ± ±0.85 ±.65 ±0.50 ±.25 ±0.5 ±0.5 00KG 0 00 kpa ±0.5 ± ±0.50 ±.00 ±0.50 ±.25 ±0.0 ±0.0 60KG 0 60 kpa ±0.5 ± ±0.30 ±0.65 ±0.50 ±.25 ±0.0 ± KG kpa ±0.5 ± ±0.40 ±0.80 ±0.50 ±.50 ±0.0 ± KG kpa ±0.5 ± ±0.50 ±.00 ±0.50 ±.25 ±0.0 ± KG kpa ±0.5 ± ±0.65 ±.00 ±0.50 ±.00 ±0.5 ±0.5 00GG 0 MPa ±0.5 ± ±0.40 ±0.60 ±0.50 ±.00 ±0.0 ±0.0 Offset: The output signal obtained when the reference pressure is applied to all available pressure ports. Also known as null or zero. 2 Thermal effect on offset: The deviation in offset due to changes in temperature over the compensated temperature range, relative to offset measured at 25 ºC. 3 Thermal effect on span: The deviation in full scale span due to changes in temperature over the compensated temperature range, relative to full scale span measured at 25 ºC. 4 Thermal hysteresis: The maximum difference between output readings when the same temperature is reached consecutively, under the same operating conditions, with temperature approaching from opposite directions within the operating temperature range. Validated over the full operating temperature and pressure ranges using a ~5 ºC/minute ramp and 30 minute dwell. Application performance may be affected by the thermal mass of the end user system. sensing.honeywell.com

12 TSC Series Specifications ± psi to ±50 psi Table 8. TSC Series Pressure Range Specifications for ± psi to ±50 psi Pressure Range Order Code (see Figure ) Pressure Range Pmin. Pmax. Unit Over Pressure Burst Pressure Common Mode Pressure Pressure Accuracy Offset (mv/v) Full Scale Span (mv/v) Thermal Effect on Offset 2 0 C to 50 C 0 C to 85 C Thermal Effect on Span 3 0 C to 50 C 0 C to 85 C Long-Term Stability 000 hr, 25 C Thermal Hysteresis 4 Differential 00PD - psi ±0.20 ± ±0.50 ±.00 ±.00 ±2.00 ±0.5 ± PD -5 5 psi ±0.5 ± ±0.40 ±0.75 ±0.75 ±2.00 ±0.0 ±0.0 05PD -5 5 psi ±0.5 ± ±0.25 ±0.50 ±0.50 ±.25 ±0.0 ± PD psi ±0.5 ± ±0.25 ±0.50 ±0.50 ±.50 ±0.0 ± PD psi ±0.5 ± ±0.25 ±0.50 ±0.50 ±.25 ±0.0 ±0.0 00PD psi ±0.5 ± ±0.30 ±0.45 ±0.50 ±.00 ±0.0 ±0.0 50PD psi ±0.5 ± ±0.20 ±0.30 ±0.50 ±.00 ±0.0 ±0.0 Gage 00PG 0 psi ±0.20 ± ±.00 ±2.05 ±.00 ±2.00 ±0.25 ± PG 0 5 psi ±0.5 ± ±0.75 ±.50 ±0.75 ±2.00 ±0.0 ±0.0 05PG 0 5 psi ±0.5 ± ±0.50 ±0.95 ±0.50 ±.25 ±0.0 ± PG 0 30 psi ±0.5 ± ±0.50 ±0.95 ±0.50 ±.50 ±0.0 ± PG 0 60 psi ±0.5 ± ±0.50 ±0.95 ±0.50 ±.25 ±0.0 ±0.0 00PG 0 00 psi ±0.5 ± ±0.60 ±0.85 ±0.50 ±.00 ±0.0 ±0.0 50PG 0 50 psi ±0.5 ± ±0.40 ±0.60 ±0.50 ±.00 ±0.0 ±0.0 Offset: The output signal obtained when the reference pressure is applied to all available pressure ports. Also known as null or zero. 2 Thermal Effect on Offset: The deviation in offset due to changes in temperature over the compensated temperature range, relative to offset measured at 25 ºC. 3 Thermal Effect on Span: The deviation in full scale span due to changes in temperature over the compensated temperature range, relative to full scale span measured at 25 ºC. 4 Thermal Hysteresis: The maximum difference between output readings when the same temperature is reached consecutively, under the same operating conditions, with temperature approaching from opposite directions within the operating temperature range. Validated over the full operating temperature and pressure ranges using a ~5 ºC/minute ramp and 30 minute dwell. Application performance may be affected by the thermal mass of the end user system. Figure 3. TSC Series Typical Temperature Performance The graph below indicates typical error multipliers for Thermal Effect on Offset (TEO) and Thermal Effect on Span (TES) outside the Compensated Temperature Range. See Tables 6-8 for details of the specified maximum errors within the Compensated Temperature Range. 4 Typical Error Multiplier for TEO and TES Operating Temperature Range Compensated Temperature Range [-40] -20 [-4] 0 [32] 0 [50] Temperature ( C [ F]) 50 [22] 85 [85] 2 sensing.honeywell.com

13 NSC Series Specifications ±2.5 mbar to ±0 bar Table 9. NSC Series Pressure Range Specifications for ±2.5 mbar to ±0 bar Pressure Range Order Code (see Figure 2) Pressure Range Pmin. Pmax. Unit Working Pressure Over Pressure Burst Pressure Common Mode Pressure Offset (mv/v) Full Scale Span (mv/v) TCO 2 (%FSS/25 ºC) TCS 3 (%FSS/25 ºC) Input Resistance 4 (kohm) TCR 5 (-40 ºC to 25 ºC) (ppm/ C) TCR 5 (25 ºC to 85 ºC) (ppm/ C) Long-Term Stability 000 hr, 25 C Accuracy Absolute 00BA 0 bar N/A ±0.25 ±0.25.6BA 0.6 bar N/A ±0.25 ± BA bar N/A ±0.20 ± BA 0 4 bar N/A ±0.25 ± BA 0 6 bar N/A ±0.25 ± BA 0 0 bar N/A ±0.20 ±0.25 Differential 2.5MD mbar ±0.50 ± MD -4 4 mbar ±0.30 ± MD -6 6 mbar ±0.20 ± MD -0 0 mbar ±0.25 ± MD -6 6 mbar , ±0.40 ± MD mbar , ±0.25 ± MD mbar , ±0.30 ± MD mbar , ±0.20 ± MD mbar , ±0.5 ± MD mbar , ±0.5 ± MD mbar ±0.25 ± MD mbar ±0.5 ± MD mbar ±0.20 ± BD - bar ±0.5 ±0.25.6BD bar ±0.5 ± BD bar ±0.0 ± BD -4 4 bar ±0.5 ± BD -6 6 bar ±0.5 ± BD -0 0 bar ±0.0 ±0.25 Gage 004MG 0 4 mbar ±0.50 ± MG 0 6 mbar ±0.40 ± MG 0 0 mbar ±0.50 ± MG 0 6 mbar , ±0.50 ± MG 0 25 mbar , ±0.50 ± MG 0 40 mbar , ±0.50 ± MG 0 60 mbar , ±0.40 ± MG 0 00 mbar , ±0.25 ± MG 0 60 mbar , ±0.5 ± MG mbar ±0.35 ± MG mbar ±0.30 ± MG mbar ±0.25 ± BG 0 bar ±0.25 ±0.25.6BG 0.6 bar ±0.25 ± BG bar ±0.20 ± BG 0 4 bar ±0.25 ± BG 0 6 bar ±0.25 ± BG 0 0 bar ±0.20 ±0.25 Offset: The output signal obtained when the reference pressure is applied to all available pressure ports. Also known as null or zero. 2 TCO (Thermal Coefficient of Offset): The deviation in offset due to changes in temperature over the compensated temeprature range, relative to offset measured at 25 ºC. 3 TCS (Thermal Coefficient of Span): The deviation in full scale span due to changes in temperature over the compensated temeprature range, relative to full scale span measured at 25 ºC. 4 Input Resistance at 25 ºC, 5 Vdc supply. 5 TCR (Thermal Coefficient of Resistance): The deviation in input resistance due to changes in temperature over the specified temperature range, relative to input resistance measured at 25 ºC. sensing.honeywell.com 3

14 NSC Series Specifications ±250 Pa to ± Mpa Table 0. NSC Series Pressure Range Specifications for ±250 Pa to ± MPa Pressure Range Order Code (see Figure 2) Pressure Range Pmin. Pmax. Unit Working Pressure Over Pressure Burst Pressure Common Mode Pressure Offset (mv/v) Full Scale Span (mv/v) TCO 2 (%FSS/25 ºC) TCS 3 (%FSS/25 ºC) Input Resistance 4 (kohm) TCR 5 (-40 ºC to 25 ºC) (ppm/ C) TCR 5 (25 ºC to 85 ºC) (ppm/ C) Long-Term Stability 000 hr, 25 C Accuracy Absolute 00KA 0 00 kpa N/A ±0.25 ± KA 0 60 kpa N/A ±0.25 ± KA kpa N/A ±0.20 ± KA kpa N/A ±0.25 ± KA kpa N/A ±0.25 ± GA 0 MPa N/A ±0.20 ±0.25 Differential 250LD Pa 33,500 67,500 00, , ±0.50 ± LD Pa 33,500 67,500 00,000345, ±0.30 ± LD Pa 33,500 67,500 00,000345, ±0.20 ± KD - kpa ±0.25 ±0.25.6KD kpa ±0.5 ± KD kpa ±0.25 ± KD -4 4 kpa ±0.30 ± KD -6 6 kpa ±0.20 ± KD -0 0 kpa ±0.5 ± KD -6 6 kpa ±0.5 ± KD kpa ±0.25 ± KD kpa ±0.5 ± KD kpa ±0.20 ± KD kpa ±0.5 ± KD kpa ±0.5 ± KD kpa ±0.0 ± KD kpa ±0.5 ± KD kpa ±0.5 ± GD - MPa ±0.0 ±0.25 Gage 400LG Pa 33,500 67,500 00,000345, ±0.50 ± LG Pa 33,500 67,500 00,000345, ±0.40 ± KG 0 kpa ±0.50 ±0.25.6KG 0.6 kpa ±0.30 ± KG 0 4 kpa ±0.50 ± KG 0 6 kpa ±0.35 ± KG 0 0 kpa ±0.25 ± KG 0 6 kpa ±0.5 ± KG 0 25 kpa ±0.35 ± KG 0 40 kpa ±0.30 ± KG 0 60 kpa ±0.25 ± KG 0 00 kpa ±0.25 ± KG 0 60 kpa ±0.25 ± KG kpa ±0.20 ± KG kpa ±0.25 ± KG kpa ±0.25 ± GG 0 MPa ±0.20 ±0.25 Offset: The output signal obtained when the reference pressure is applied to all available pressure ports. Also known as null or zero. 2 TCO (Thermal Coefficient of Offset): The deviation in offset due to changes in temperature over the compensated temeprature range, relative to offset measured at 25 ºC. 3 TCS (Thermal Coefficient of Span): The deviation in full scale span due to changes in temperature over the compensated temeprature range, relative to full scale span measured at 25 ºC. 4 Input Resistance at 25 ºC, 5 Vdc supply. 5 TCR (Thermal Coefficient of Resistance): The deviation in input resistance due to changes in temperature over the specified temperature range, relative to input resistance measured at 25 ºC. 4 sensing.honeywell.com

15 NSC Series Specifications ± in H 2 O to ±50 psi Table. NSC Series Pressure Range Specifications for ± inh 2 O to ±50 psi Pressure Range Order Code (see Figure 2) Pressure Range Pmin. Pmax. Unit Working Pressure Over Pressure Burst Pressure Common Mode Pressure Offset (mv/v) Full Scale Span (mv/v) TCO 2 TCS 3 (%FSS/25 ºC) (%FSS/25 ºC) Input Resistance 3 (kohm) TCR 4 (-40 ºC to 25 ºC) (ppm/ C) TCR 5 (25 ºC to 85 ºC) (ppm/ C) Long-Term Stability 000 hr, 25 C Accuracy Absolute 05PA 0 5 psi N/A ±0.25 ± PA 0 30 psi N/A ±0.25 ± PA 0 60 psi N/A ±0.25 ± PA 0 00 psi N/A ±0.25 ± PA 0 50 psi N/A ±0.20 ±0.25 Differential 00ND - inh2o ± ND -2 2 inh2o ± ND -4 4 inh2o ± ND -5 5 inh2o ± ND -0 0 inh2o ± ND inh2o ± ND inh2o ± PD - psi ± PD -5 5 psi ± PD -5 5 psi ± PD psi ± PD psi ± PD psi ± PD psi ±0.25 Gage 002NG 0 2 inh2o ± NG 0 4 inh2o ± NG 0 5 inh2o ± NG 0 0 inh2o ± NG 0 20 inh2o ± NG 0 30 inh2o ± PG 0 psi ± PG 0 5 psi ± PG 0 5 psi ± PG 0 30 psi ± PG 0 60 psi ± PG 0 00 psi ± PG 0 50 psi ±0.25 Offset: The output signal obtained when the reference pressure is applied to all available pressure ports. Also known as null or zero. 2 TCO (Thermal Coefficient of Offset): The deviation in offset due to changes in temperature over the compensated temeprature range, relative to offset measured at 25 ºC. 3 TCS (Thermal Coefficient of Span): The deviation in full scale span due to changes in temperature over the compensated temeprature range, relative to full scale span measured at 25 ºC. 4 Input Resistance at 25 ºC, 5 Vdc supply. 5 TCR (Thermal Coefficient of Resistance): The deviation in input resistance due to changes in temperature over the specified temperature range, relative to input resistance measured at 25 ºC. sensing.honeywell.com 5

16 Available Standard Configurations Figure 4. All Available Standard Configurations (Dimensional drawings on pages noted below.) Package Code Pressure Port DIP SMT SIP NN page 8 page 20 page 23 AA page 23 AN page 8 page 2 page 24 LN page 8 page 2 page 24 FF page 24 FN page 25 GN page 25 NB page 25 RN page 9 page 2 page 26 6 sensing.honeywell.com

17 Available Standard Configurations Figure 4. All Available Standard Configurations (Continued; dimensional drawings on pages noted below.) Package Code Pressure Port DIP SMT SIP RR page 9 page 22 page 26 DR page 9 page 22 page 26 JN page 20 page 22 page 27 JJ page 20 page 23 page 27 HH page 27 HN page 28 MN page 28 SN page 28 sensing.honeywell.com 7

18 Dimensional Drawings DIP Packages Figure 5. DIP Package Dimensional Drawings (For reference only: mm [in]) Dimensions DIP NN: No ports 5,44 [0.24] 6,99 [0.275] 3,3 [0.53] PIN INDICATOR 9,24 [0.364] 0,85 [0.427] 8X 0,46 [0.08] DIP AN: SIngle axial barbed port 6,2 [0.24] 4,93 [0.94] 3,75 [0.54] 7,95 [0.33] 6,99 [0.275] 3,3 [0.53] PIN INDICATOR 9,24 [0.364],2 [0.44] 8X 0,46 [0.08] DIP LN: Single axial barbless port 3,75 [0.54] 5,80 [0.228] PIN INDICATOR 2, 54 TYP. 6,95 [0.274] 2,47 [0.097] 9,24 [0.364],2 [0.44] 6,99 [0.275 ] 3,3 [0.53],00 [0.039] 8X 0,46 [0.08] 8 sensing.honeywell.com

19 Dimensional Drawings DIP Packages Figure 5. DIP Package Dimensional Drawings (continued) Dimensions DIP RN: Single radial barbed port 5,80 [0.228] 3,3 [0.53] 6,99 [0.275] 4,2 [0.7],93 [0.076] 9,24 [0.364],2 [0.44] 8X 0,46 [0.08] DIP RR: barbed ports, same side 4,0 [0.6] 6,6 [0.242] 3,3 [0.53] 6,99 [0.275] 2X,93 [0.076] 4,65 [0.83] 9,24 [0.364],2 [0.44] 3,78 [0.49] 8X 0,46 [0.08] DIP DR: barbed ports, opposite sides 5,76 [0.620] 2X,93 [0.076] 6,6 [0.242] 6,99 [0.275] 3,3 [0.53] 9,24 [0.364],2 [0.44] 3,78 [0.49] 8X 0,46 [0.08] sensing.honeywell.com 9

20 Dimensional Drawings DIP and SMT Packages Figure 5. DIP Package Dimensional Drawings (continued) Dimensions DIP JN: Single radial barbless port 6,75 [0.266] 2,34 [0.092] 3,28 [0.29] 9,9 7,58 [0.390] [0.298],9 3,28 9,40 [0.07] [0.29] [0.370] 4, 3,3 [0.6] [0.53] 7,00 [0.276] 6,70 [0.264] 9,24 [0.364],92 [0.469] 8 X 0,46 [0.08] DIP JJ: radial barbless ports, same side 2X 6,75 [0.266] 2X 2,34 [0.092] 4,2 [0.6] 2,54 3,28 [0.29] 9,9 6,5 [0.390] [0.256] 4,76 2,2 9,40 [0.87] [0.087] [0.370] 4, 3,3 [0.6] [0.53] 7,00 [0.276] 4, [0.6] 9,24 [0.364],92 [0.469],9 [0.07],94 [0.076] 8 X 0,46 [0.08] Figure 6. SMT Package Dimensional Drawings (For reference only: mm [in]) Dimensions SMT NN: No ports 5,44 [0.24] 6,99 [0.275] 3,3 [0.53] PIN INDICATOR 4,80 [0.89] 6,4 [0.252] 8X 0,46 [0.08] 20 sensing.honeywell.com

21 Dimensional Drawings SMT Packages Figure 6. SMT Package Dimensional Drawings (continued) Dimensions SMT AN: Single axial barbless port 3,75 [0.54] 7,95 [0.33] 4,93 DIA. [0.94] 6,99 [0.275] 3,3 [0.53] PIN INDICATOR 4,80 [0.89] 6,77 [0.266] 8X 0,46 [0.08] SMT LN: Single axial barbless port 3,75 [0.54] 5,80 [0.228] [0.394] PIN INDICATOR 2,47 DIA. [0.097] 4,80 [0.89] 6,77 [0.266] 6,99 [0.275] 8X 0,46 [0.08] 3,3 [0.53] SMT RN: Single radial barbed port 5,80 [0.228] 3,3 [0.53] 6,99 [0.275] 4,2 [0.7],93 DIA. [0.076] 4,80 [0.89] 6,77 [0.266] 8X 0,46 [0.08] sensing.honeywell.com 2

22 Dimensional Drawings SMT Packages Figure 6. SMT Package Dimensional Drawings (continued) Dimensions SMT RR: barbed ports, same side 4,0 [0.6] 6,6 [0.242] 3,3 [0.53] 6,99 [0.275] 2X,93 DIA. [0.076] 4,6 [0.8] 4,80 [0.89] 6,77 [0.266] 8X 0,46 [0.08] 3,78 [0.49] SMT DR: barbed ports, opposite sides 2X 2,93 [0.5] 5,8 [0.62] 6,6 [0.242] 2X,93 DIA. [0.076] 6,99 [0.275] 3,3 [0.53] 3,78 [0.49] 4,80 [0.89] 6,77 [0.266] 8X 0,46 [0.08] SMT JN: Single radial barbless port 6,5 [0.256] 6,75 3,28 2,2 [0.266] [0.29] [0.087] 2,34 [0.092] 3,3 [0.53] 7,00 [0.276] 9,9 [0.390] 9,40 [0.370],87 [0.074] 4,5 [0.63] 6,98 [0.275] 2,54 7,48 [0.294] 4,80 [0.89] 8 X 0,46 [0.08] 8 X,28 [0.050] 5,38 [0.22] 22 sensing.honeywell.com

23 Dimensional Drawings SMT and SIP Packages Figure 6. SMT Package Dimensional Drawings (continued) Dimensions SMT JJ: barbless ports, same side 2X 6,75 [0.266] 2X 2,34 [0.092] 4,62 [0.639] 2,54 3,28 [0.29] 9,9 7,58 [0.298] [0.390] 9,40 [0.370] 4,76 [0.87] 4,5 [0.63] 7,00 3,3 [0.276] [0.53] 8,36 [0.329] 5,68 [0.89] 8 X 0,46 [0.08] 8 X,28 [0.050] 6,98 [0.275] 5,38 [0.22] Figure 7. SIP Package Dimensional Drawings (For reference only: mm [in].) SIP NN: No ports Dimensions 4,87 [0.92] 5,2 [0.60] 4X 0,5 SIP AA: Dual axial barbed ports, opposite sides 22,06 [0.869] 5,2 [0.60] 2X 4.93 DIA. [0.94] 4X 0,5 sensing.honeywell.com 23

24 Dimensional Drawings SIP Packages Figure 7. SIP Package Dimensional Drawings (continued) Dimensions SIP AN: Single axial barbed port 3,75 [0.54] 5,2 [0.60] 4.93 DIA. [0.94] 4X 0,5 SIP LN: Single axial barbless port 3,75 [0.54] 5,2 [0.60] 2,47 DIA. [0.097] 4X 0,5 SIP FF: Fastener mount, dual axial barbed ports, opposite sides 29,48 [.6] 23,2 [0.90] 27,20 [.07] 0,44 [0.4] 2X 3.94 DIA. [ 0.55] 2X 4,78 DIA. [0.88] 7,78 [0.700] 20,6 [0.794] 4X 0,5 24 sensing.honeywell.com

25 Dimensional Drawings SIP Packages Figure 7. SIP Package Dimensional Drawings (continued) Dimensions SIP FN: Fastener mount, single axial barbed port 29,48 [.6] 23,2 [0.90] 6,38 [0.645] 2X 3.94 DIA. [0.55] 4.78 DIA. [0.88] 7,78 [0.700] 20,6 [0.794] 4X 0,5 SIP GN: Ribbed fastener mount, single axial barbed port 27,96 [.0] 2,60 [0.850] 6,5 [0.650] 2X 3,94 DIA. [0.55] 4.78 DIA. [0.88] 9,06 [0.750] 4X 0,5 0,63 [0.48] SIP NB: Fastener mount, dual axial ports, same side 27,3 [.075] 25,3 2,60 [0.996] [0.850] 2X 4,80 DIA. [0.89] 22,87 [0.900] 2X 3.50 DIA. [0.38] 4X 0,5 3 [0.52] sensing.honeywell.com 25

Airflow Sensors Line Guide

Airflow Sensors Line Guide Airflow Sensors Line Guide Go with the flow of engineering leadership. All airflow sensors operate on heat transfer flow and differential pressure. But Honeywell Sensing and Control (S&C) offers advanced

More information

Rackmount Intelligent Pressure Scanners

Rackmount Intelligent Pressure Scanners Rackmount Intelligent Pressure Scanners NetScanner System 9816/98RK-1 FEATURES ±0.05% Accuracy 100 Hz EU Throughput Autonegotiating 10/100/1G Base T Ethernet - TCP and UDP Protocol Pressure Ranges up to

More information

humidity sensors Line Guide FEATURES Honeywell HumidIcon Digital Humidity/Temperature Sensors HIH7000 Series, HIH8000 Series

humidity sensors Line Guide FEATURES Honeywell HumidIcon Digital Humidity/Temperature Sensors HIH7000 Series, HIH8000 Series Humidity Sensors Line Guide Performance and reliability. At Honeywell Sensing and Productivity Solutions (S&PS), each sensor is designed to provide enhanced stability, reliability and sensitivity. Digital

More information

PRODUCT PROFILE FEATURES

PRODUCT PROFILE FEATURES PRODUCT PROFILE Pressure Transmitters & Pneumatic Transducer Airflow Transmitter, Differential Air Pressure Transmitter and Differential & Gauge Liquid/Gas Pressure Transmitter FEATURES AIRFLOW TRANSMITTER

More information

Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm

Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics

More information

HIH-4000 Series Humidity Sensors

HIH-4000 Series Humidity Sensors HIH-4000 Series Humidity Sensors DESCRIPTION The HIH-4000 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or

More information

Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version

Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version Electronic pressure measurement Digital pressure gauge for industrial applications Model DG-10-S, Standard version Model DG-10-E, Enhanced version WIKA data sheet PE 81.66 Applications Machine building

More information

SEMICONDUCTOR TECHNICAL DATA

SEMICONDUCTOR TECHNICAL DATA SEMICONDUCTOR TECHNICAL DATA Order this document by MPX5050/D The MPX5050 series piezoresistive transducer is a state of the art monolithic silicon pressure sensor designed for a wide range of applications,

More information

Honeywell HumidIcon Digital Humidity/Temperature Sensors. HIH8000 Series ±2.0 %RH Accuracy. Datasheet

Honeywell HumidIcon Digital Humidity/Temperature Sensors. HIH8000 Series ±2.0 %RH Accuracy. Datasheet Honeywell HumidIcon Digital Humidity/Temperature Sensors HIH8000 Series ±2.0 %RH Accuracy Datasheet Honeywell HumidIcon Digital Humidity/Temperature Sensors Honeywell HumidIcon Digital Humidity/Temperature

More information

How to measure absolute pressure using piezoresistive sensing elements

How to measure absolute pressure using piezoresistive sensing elements In sensor technology several different methods are used to measure pressure. It is usually differentiated between the measurement of relative, differential, and absolute pressure. The following article

More information

2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.

2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar. CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension

More information

RPS/DPS 8100. High Accuracy Resonant Pressure Sensor. GE Measurement & Control. Features:

RPS/DPS 8100. High Accuracy Resonant Pressure Sensor. GE Measurement & Control. Features: GE Measurement & Control RPS/DPS 8100 High Accuracy Resonant Pressure Sensor For over 40 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in industrial,

More information

Thermal Flow Sensor Die

Thermal Flow Sensor Die Microsystems, Inc. Thermal Flow Sensor Die Description Posifa s Thermal Flow Sensor Die measures the flow of a liquid or gaseous medium across the surface of the die using the Thermotransfer (Calorimetric)

More information

RPS 8000. High Accuracy Resonant Pressure Sensor. GE Measurement & Control Solutions. Features:

RPS 8000. High Accuracy Resonant Pressure Sensor. GE Measurement & Control Solutions. Features: GE Measurement & Control Solutions RPS 8000 High Accuracy Resonant Pressure Sensor For over 35 years, Druck has manufactured precision pressure sensors with a capability to meet critical applications in

More information

Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate

Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate 1 919 1919P01 1919P03 QBM65/C, QBM75-1U/C Differential Pressure Sensors for air and non-corrosive gases, with calibration certificate QBM751-1/C QBM65/C QBM75/C Highly accurate measurements with calibration

More information

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals

More information

www.suco.de Electronic Pressure Monitoring New Products

www.suco.de Electronic Pressure Monitoring New Products Electronic Pressure Monitoring New Products RoHS compliant Electronic Pressure Switches SoS-Technology with one or two switching functions Electronic Pressure Switches CE marking SUCO Electronic pressure

More information

Solutions. Sensing and Control

Solutions. Sensing and Control Background The Basic Amplified ABP Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and

More information

Pressure transmitter For general industrial applications Model A-10

Pressure transmitter For general industrial applications Model A-10 Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding

More information

MicroMachined Silicon modular pressure sensor

MicroMachined Silicon modular pressure sensor MicroMachined Silicon modular pressure sensor Configurable High Accuracy High Temperature Performance For Industrial, Test and Measurement, and Aerospace Applications Low Pressure from 10 in-h 2 O to 2.5

More information

T0118 T2118 T3118. Instruction Manual

T0118 T2118 T3118. Instruction Manual Programmable indoor transmitter of temperature T0118 Programmable indoor transmitter of atmospheric pressure T2118 Programmable indoor transmitter of temperature, relative humidity and other derived humidity

More information

The PACE5000 Modular Pressure Controller/Indicator

The PACE5000 Modular Pressure Controller/Indicator GE Sensing The PACE5000 Modular Pressure Controller/Indicator First in a new generation of modular, high precision Druck pressure controllers/indicators, designed for ATE and test bench applications. The

More information

OEM-EP Pressure Controllers

OEM-EP Pressure Controllers Pressure Controllers Typical Applications Carrier Gas Pressure Control Air over Liquid Control Mass Spectrometer Process Gas Supply Pressure Control Miniature ler The Miniature ler converts a variable

More information

Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61

Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS 40.1001 401001/000-459-405-502-20-601-61 Produktdatenblatt - JUMO MIDAS Pressure Transmitter JUMO AS Street address: Solheimveien 50, 1470 Lørenskog, Norway Phone: +47 67 97 37 10 Delivery address: Solheimveien 50, 1470 Lørenskog, Norway Fax:

More information

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated

Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated Freescale Semiconductor Data Sheet: Technical Data Integrated Silicon Pressure Sensor On-Chip Signal Conditioned, Temperature Compensated and Calibrated The MPxx5010 series piezoresistive transducers are

More information

Heavy Duty Pressure Sensors/ Transducers Line Guide

Heavy Duty Pressure Sensors/ Transducers Line Guide Sensors/ Line Guide products. Built for the toughest applications. Honeywell Sensing and Productivity Solutions (S&PS) offers decades of experience in the heavy duty pressure products industry. That s

More information

Temperature sensor with integrated transmitter for industrial applications, MBT 3560

Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Temperature sensor with integrated transmitter for industrial applications, MBT 3560 Technical brochure Features Designed for use in harsh industrial enviroments where reliable, robust and accurate equipment

More information

PACE Modular Pressure Controller

PACE Modular Pressure Controller GE Measurement & Control Solutions PACE Modular Pressure Controller A new generation of high precision Druck pressure controller, designed for test bench, bench top & rack mount calibration & automated

More information

Rosemount 333 HART Tri-Loop

Rosemount 333 HART Tri-Loop Product Data Sheet September 2014 00813-0100-4754, Rev GA Rosemount 333 HART Tri-Loop HART-to-Analog Signal Converter Convert a digital HART signal into three additional analog signals Easy to configure

More information

Digital Pressure Measuring Instrument MDR480

Digital Pressure Measuring Instrument MDR480 Description The digital panel instrument MDR480 is designed to measure, display, and monitor pressures in industrial applications. The instrument is panel mounted with a front frame dimension of 96 mm

More information

Mass Flow Meters & Controllers

Mass Flow Meters & Controllers HFM-D-3A & 305A Mass Flow Meters HFC-D-3A & 307A Mass Flow Controllers FEATURES Range 0-25 slm to 0-2500 slm (N 2 Equivalent) Excellent Accuracy ±(0.5% of Reading + 0.2% of Full Scale) 0-5 VDC or 4-20

More information

Vehicle Brake System Monitoring 2-wire, 4-20 ma option; Intrinsic Safety Approval to E Exia IIC T4 (Tamb=60 C) BASEEFA, CENELEC EN50-020

Vehicle Brake System Monitoring 2-wire, 4-20 ma option; Intrinsic Safety Approval to E Exia IIC T4 (Tamb=60 C) BASEEFA, CENELEC EN50-020 Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and vibration resistant

More information

AAV003-10E Current Sensor

AAV003-10E Current Sensor Datasheet AAV003-10E Current Sensor Key Features For Low Current Detection On-Chip Current Strap for Precise Operation 80 ma to +80 ma Linear Range Sensitivity up to 2 mv/ma AC or DC Measurement Ultraminiature

More information

VT-802 Temperature Compensated Crystal Oscillator

VT-802 Temperature Compensated Crystal Oscillator T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,

More information

OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250

OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 MAKING MODERN LIVING POSSIBLE Data sheet OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250 The compact OEM pressure transmitter programme is designed for use in severe hydraulic

More information

Rosemount 333 HART Tri-Loop

Rosemount 333 HART Tri-Loop Product Data Sheet Rosemount 333 Rosemount 333 HART Tri-Loop HART-TO-ANALOG SIGNAL CONVERTER Convert a digital HART signal into three additional analog signals Easy to configure and install Accessory product

More information

Automotive and Anti-Sulfuration Chip Resistor 0402

Automotive and Anti-Sulfuration Chip Resistor 0402 The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the

More information

The Do s and Don ts of Pressure Transducers

The Do s and Don ts of Pressure Transducers The Do s and Don ts of Pressure Transducers ABSTRACT When specifying a pressure transducer for a process measurement, a number of items have to be considered. Some of the more important ones are discussed

More information

VSO MAX HP High Flow Proportional Valve

VSO MAX HP High Flow Proportional Valve VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,

More information

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply) transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control

More information

50 W Power Resistor, Thick Film Technology, TO-220

50 W Power Resistor, Thick Film Technology, TO-220 50 W Power Resistor, Thick Film Technology, TO-220 FEATURES 50 W at 25 C heatsink mounted Adjusted by sand trimming Leaded or surface mount versions High power to size ratio Non inductive element Material

More information

Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output.

Technical data. General specifications. Signal voltage 15... 30 V DC Signal duration. 1 s Input 2. Signal voltage. 1 s Analog output. Model Number Features Very small housing High climatic resistance 4 Bit multiturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling

More information

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors

WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors WW12X, WW08X, WW06X, WW04X ±1%, ±5% Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxX_V12 Nov.- 2011

More information

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability.

Power chip resistor size 2512 PRC221 5%; 2% FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. FEATURES Reduced size of final equipment Low assembly costs Higher component and equipment reliability. APPLICATIONS Power supplies Printers Computers Battery chargers Automotive Converters CD-ROM. QUICK

More information

P3000 Series. Pneumatic Deadweight Testers Model P3000. Technical Data. Features

P3000 Series. Pneumatic Deadweight Testers Model P3000. Technical Data. Features P3000 Series Pneumatic Deadweight Testers P3000 Technical Data Features Pressure ranges from Vacuum through 2 000 psi (140 bar) Accuracy better than 0.015 % of reading. (Increased accuracy option of 0.008

More information

FMA 3100/3100ST/3300/3300ST Series Thermal Mass Flow Sensors and Meters

FMA 3100/3100ST/3300/3300ST Series Thermal Mass Flow Sensors and Meters FMA 3100/3100ST/3300/3300ST Series Thermal Mass Flow Sensors and Meters M-4270/0707, pg. 2 of 29 READ THIS MANUAL COMPLETELY BEFORE ATTEMPTING TO CONNECT OR OPERATE YOUR FLOW SENSOR. FAILURE TO DO SO MAY

More information

Type EDL, Electric Double Layer Supercapacitors Ultra High Capacitance, Small Case Size Options

Type EDL, Electric Double Layer Supercapacitors Ultra High Capacitance, Small Case Size Options Ultra High Capacitance, Small Case Size Options Type EDL electric double layer supercapacitors offer extremely high capacitance values (farads) in a variety of packaging options that will satisfy, low

More information

PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages

PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected

More information

Specification of 5 Wire Analog Touch Panel

Specification of 5 Wire Analog Touch Panel Specification of 5 Wire Analog Touch Panel 5 WIRE ANALOG RESISTIVE TOUCH PANEL A. Application This specification applies to the 5 Wire Analog Resistive Touch Panel. B. Environmental Conditions 1. Operating

More information

Application Note TMA Series

Application Note TMA Series 1W, SIP, Single & Dual Output DC/DC Converters Features SIP Package with Industry Standard Pinout Package Dimension: 19.5 x 10.2 x 6.1 mm (0.77 x 0.4 x 0.24 ) 5V&12V Models 19.5 x 10.2 x 7.1 mm (0.77 x

More information

Compliant Terminal Technology Summary Test Report

Compliant Terminal Technology Summary Test Report Engineering Report ER04100 October 5th, 2004 Revision A Copyright Autosplice Inc., September 2004 Table of Contents Summary Overview 3 Compliant Terminal Specifications 3 Test Plan 4 Test Conditions 4

More information

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC 8mm Solenoid Valve Typical Applications Portable Equipment Blood Pressure Monitoring Wound Therapy Air and Oxygen Delivery Sensor Zeroing Product Specifications Mechanical Valve Type: 3-Way, Solenoid-actuated

More information

High Precision TCXO / VCTCXO Oscillators

High Precision TCXO / VCTCXO Oscillators Available at Digi-Key** www.digikey.com High Precision TCXO / VCTCXO Oscillators 2111 Comprehensive Drive Phone: 60-81- 722 Fax: 60-81- 00 US Headquarters: 60-81-722 European Headquarters: +-61-72221 Description:

More information

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402

WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 WR12, WR08, WR06, WR04 ±1%, ±5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice. Page 1 of 10 ASC_WR_V23 APR.- 2015

More information

Precision Leaded Resistors

Precision Leaded Resistors FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 Ω to

More information

Subminiature Load Cell Model 8417

Subminiature Load Cell Model 8417 w Technical Product Information Subminiature Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential connection...

More information

SMD Power Elements Design Guide. 50 A SMD Technology Small Size High Current

SMD Power Elements Design Guide. 50 A SMD Technology Small Size High Current SMD Power Elements Design Guide 50 A SMD Technology Small Size High Current Contents Surface Mount Technology & Assembly Surface Pad Geometry & Stencil Technical Data Qualification Reliability Test 2 www.we-online.com

More information

Specifications - Installation and Operating Instructions Ø5 [127.00] 17/64 [6.91] 1-59/64 [48.89]

Specifications - Installation and Operating Instructions Ø5 [127.00] 17/64 [6.91] 1-59/64 [48.89] Bulletin P-DM-1100 Series DM-1000 DigiMag Digital Differential Pressure Gage Specifications - Installation and Operating Instructions PRESSURE CONNECTIONS 21/64 [8.59] LONG Ø5 [127.00] 4-31/64 [113.89]

More information

T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE

T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-SERIES INDUSTRIAL INCLINOMETER ANALOG INTERFACE T-Series industrial inclinometers are compact high performance sensors used to determine inclination in roll and pitch axes with excellent precision and

More information

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard

Type RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n

More information

MTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter

MTI10 Insertion and MTL10 In-line Thermal Mass Flowmeter and Temperature Transmitter Thermal Mass meter and Temperature Transmitter Description The MTI10 insertion thermal mass flowmeter and the MTL10 in-line thermal mass flowmeter provide accurate mass flow measurement of clean, dry gases

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS

More information

Typical Aluminum GFM Mass Flow Meter

Typical Aluminum GFM Mass Flow Meter MASS FLOW METERS Design Features n Rigid metallic construction. n Maximum pressure of 1000 psig (70 bars). n Leak integrity 1 x 10-9 of helium. n NIST traceable certification. n Built-in tiltable LCD readout.

More information

MPXAZ6115A MPXHZ6115A SERIES. Freescale Semiconductor Technical Data. MPXAZ6115A Rev 4, 01/2007

MPXAZ6115A MPXHZ6115A SERIES. Freescale Semiconductor Technical Data. MPXAZ6115A Rev 4, 01/2007 Freescale Semiconductor Technical Data Media Resistant and High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal Conditioned, Temperature Compensated

More information

NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter

NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter NTE2053 Integrated Circuit 8 Bit MPU Compatible A/D Converter Description: The NTE2053 is a CMOS 8 bit successive approximation Analog to Digital converter in a 20 Lead DIP type package which uses a differential

More information

Honeywell Pressure Switches Line Guide

Honeywell Pressure Switches Line Guide Honeywell Pressure Line Guide Better under pressure. For years, manufacturers and operators of heavy-duty equipment have trusted Honeywell pressure and vacuum switches. They re proven under pressure, in

More information

Freescale Semiconductor. Integrated Silicon Pressure Sensor. On-Chip Signal Conditioned, Temperature Compensated and Calibrated MPX5500.

Freescale Semiconductor. Integrated Silicon Pressure Sensor. On-Chip Signal Conditioned, Temperature Compensated and Calibrated MPX5500. Freescale Semiconductor Integrated Silicon Pressure Sensor + On-Chip Signal Conditioned, Temperature Compensated and Calibrated Series Pressure Rev 7, 09/2009 0 to 500 kpa (0 to 72.5 psi) 0.2 to 4.7 V

More information

SELECTION GUIDE. Nominal Input

SELECTION GUIDE. Nominal Input www.murata-ps.com NKE Series FEATURES RoHS Compliant Sub-Miniature SIP & DIP Styles 3kVDC Isolation UL Recognised Wide Temperature performance at full 1 Watt load, 40 C to 85 C Increased Power Density

More information

Description. Dimensions. Features. www.pwb-encoders.com. precision works better

Description. Dimensions. Features. www.pwb-encoders.com. precision works better Description The MEC22 is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square wave outputs in quadrature

More information

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603

TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603 WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without

More information

Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES AC averaging technique used to rectify, amplify, and filter 50 Hz to 400 Hz sine-wave signals. Accepts inputs of between 20 mv to 550 V rms to give

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.

More information

Relative and absolute pressure switch type 529

Relative and absolute pressure switch type 529 Relative and absolute pressure switch type 529 Pressure range -1... 0 60 bar The compact type 529 pressure switch is based upon the Huba Control developed unique ceramic technology used for the last 20

More information

PMP 4000 Series. Druck Amplified Output Pressure Transducers. GE Sensing. Applications. Features

PMP 4000 Series. Druck Amplified Output Pressure Transducers. GE Sensing. Applications. Features Features Applications The PMP 4000 Series provides a complete range of high level voltage output pressure transducers offering advanced levels of measurement accuracy, stability and flexibility from a

More information

3mm Photodiode,T-1 PD204-6C/L3

3mm Photodiode,T-1 PD204-6C/L3 3mm Photodiode,T-1 Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high

More information

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES

DISCONTINUED (1998) FBR46 SERIES. MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) RoHS compliant FEATURES MINIATURE RELAY 2 POLES 1 to 2 A (FOR SIGNAL SWITCHING) FBR46 SERIES RoHS compliant FEATURES Miniature size About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.

More information

Model: DC-A2IO Advanced HVAC Controller

Model: DC-A2IO Advanced HVAC Controller Model: DC-A2IO Advanced HVAC Controller Job Name: Schedule Reference: Date: DC-A2IO Advanced HVAC Controller Package PAC-IF01 M-Net Adapter AL2-14MR-D α2 Simple Application Controller Accessories AL2-2DA

More information

DS 600. A contact free flux gate based current measurement sensor 600A rms

DS 600. A contact free flux gate based current measurement sensor 600A rms DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum

More information

Power Resistor Thick Film Technology

Power Resistor Thick Film Technology Power Resistor Thick Film Technology LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. FEATURES

More information

SPECIFICATION. MAT.03A Embedded Active GPS and Cellular Antenna Assembly and Reference Board

SPECIFICATION. MAT.03A Embedded Active GPS and Cellular Antenna Assembly and Reference Board SPECIFICATION Part Number: MAT.03A Product Name: Features: MAT.03A Embedded Active GPS and Cellular Antenna Assembly and Reference Board 2in1 Embedded Antenna Solution Two SMA(F) connectors for Output

More information

DPI 260 SERIES: Digital Pressure Indicators

DPI 260 SERIES: Digital Pressure Indicators DPI 260 SERIES: Digital Pressure Indicators INTRODUCTION The DPI 260, 261 and 262 range of digital pressure instruments measure and indicate pressure in any specified scale units and provide accuracies

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK code Location code Customers Sites locations: 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Lim Tiong Thai Tel: +673-2-386475

More information

Description of High Accuracy Digital Pressure Gauge Design

Description of High Accuracy Digital Pressure Gauge Design Order this document by AN1953/D Description of High Accuracy Digital Pressure Gauge Design By Daniel Malik System Application Engineer Technical Information Center MCSL Roznov INTRODUCTION This application

More information

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER Application : The RISH CON - Hz transducer is used for frequency measurement. The output signal is proportional to measured frequency and is either load independent DC Current or load independent DC Voltage.

More information

GT Sensors Precision Gear Tooth and Encoder Sensors

GT Sensors Precision Gear Tooth and Encoder Sensors GT Sensors Precision Gear Tooth and Encoder Sensors NVE s GT Sensor products are based on a Low Hysteresis GMR sensor material and are designed for use in industrial speed applications where magnetic detection

More information

Proportional pressure regulators VPPE

Proportional pressure regulators VPPE Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/

More information

Contactless Encoder RI360P0-QR24M0-INCRX2-H1181

Contactless Encoder RI360P0-QR24M0-INCRX2-H1181 Compact, rugged housing Many mounting possibilities Status displayed via LED Immune to electromagnetic interference 1024 pulses per revolution (default) 360, 512, 1000, 1024, 2048, 2500, 3600, 4096, parametr.

More information

Conductive Level Switch FK 2 Technical Data:

Conductive Level Switch FK 2 Technical Data: Level switch for conductive liquids Optional electrode length adjustment Hygienic installation in accordance with EHEDG Wetted parts compatible with FDA requirements Potted electronic Not influenced by

More information

Ventostat Wall Mount. Telaire Wall Mount CO 2. , Humidity and Temperature Transmitters. GE Measurement & Control. Features:

Ventostat Wall Mount. Telaire Wall Mount CO 2. , Humidity and Temperature Transmitters. GE Measurement & Control. Features: GE Measurement & Control Ventostat Wall Mount Telaire Wall Mount, Humidity and Temperature Transmitters Features: Patented, Absorption Infrared Gas sensing engine provides high accuracy in a compact low

More information

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free

DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0402 5%, 1% RoHS compliant & Halogen Free DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% RoHS compliant & Halogen Free Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes series chip

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology DIMENSIONS in millimeters Power Resistor for Mounting onto a Heatsink Thick Film Technology FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series Non inductive Easy

More information

DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512

DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 DATA SHEET LEAD FREE CHIP RESISTORS RC_P series ±0.5%, ±1%, ±5% Sizes 0100/0201/0402/0603/005/ 1206/1210/121/2010/2512 Product specification August 22, 2014 V.0 Product specification 2 SCOPE This specification

More information

9. Force Measurement with a Strain gage Bridge

9. Force Measurement with a Strain gage Bridge 9. Force Measurement with a Strain gage Bridge Task 1. Measure the transfer characteristics of strain-gage based force sensor in a range 0 10 kg 1. 2. Determine the mass of an unknown weight. 3. Check

More information

SMD High Power Precision Resistors

SMD High Power Precision Resistors Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications

More information

TLI4946. Datasheet TLI4946K, TLI4946-2K, TLI4946-2L. Sense and Control. May 2009

TLI4946. Datasheet TLI4946K, TLI4946-2K, TLI4946-2L. Sense and Control. May 2009 May 2009 TLI4946 High Precision Hall Effect Latches for Industrial and Consumer Applications TLI4946K, TLI4946-2K, TLI4946-2L Datasheet Rev. 1.0 Sense and Control Edition 2009-05-04 Published by Infineon

More information

Data Sheet PS1B Pressure Switch

Data Sheet PS1B Pressure Switch Data Sheet PS1B Pressure Switch Main Features Pressure Ranges 0 to 6 up to 0 to 600 bar (gage) Electrical Connection G 1/4 A DIN 3852-E or -A Pressure Connection Output Signal M12-4 Pin 4-20 ma, Programmable

More information

HM1500LF Relative Humidity Module

HM1500LF Relative Humidity Module Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage supply from 4.75Vdc

More information

Hardware Documentation. Data Sheet HAL 202. Hall-Effect Sensor. Edition Sept. 18, 2014 DSH000159_002EN

Hardware Documentation. Data Sheet HAL 202. Hall-Effect Sensor. Edition Sept. 18, 2014 DSH000159_002EN Hardware Documentation Data Sheet HAL 202 Hall-Effect Sensor Edition Sept. 18, 2014 DSH000159_002EN HAL202 Copyright, Warranty, and Limitation of Liability The information and data contained in this document

More information

WCAP-CSGP Ceramic Capacitors

WCAP-CSGP Ceramic Capacitors A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 15000 pf ± 10% Rated voltage Dissipation factor

More information