Siberian Heat Saving Company

Transcription

1 Siberian Heat Saving Company

2 liquid, ultra-thin, heat-insulating material. It consists of microscopic vacuum ceramic microspheres (diameter mm), which are in the liquid composition on the similarity of the paint. After drying form a flexible coating. The layer thickness of 0.5 mm are arranged around 20 layers of vacuum microspheres. They create a thermal barrier and prevent the passage of heat flow. Heat flow 2

3 Thermal insulation efficiency, applied a layer of 1 mm., similar efficiency 50 mm. polyurethane foam. 1 mm TSM Ceramic 50 mm Polyurethane foam 50 mm Mineral wool 3

4 Material operated at temperatures from -60 C to C. The temperature of the surface to be coated is from + 5 C to C. The coating has a guarantee of 10 years, and service life of over 30 years The cost of working with the material less than the cost of conventional solutions Traditional heat insulation Galvanized iron Ruberoid Vapor insulation Mats sewed Undercoat (2 layers) 4

5 Material is applied to the surface of any shape with a brush or spray: metal, concrete, brick, wood, plastic, drywall and other. metal drywall concrete brick wood plastic 5

6 30% 60-70% 45% 0.6 mm 2 db 0,03g / cm³ 6

7 С. 30 years 7

8 Energy-saving material construction: is widely used for insulation in Walls, floors, ceilings, roofs of residential and industrial buildings, both from the inside and outside Metal structures Hangars and garages Balconies, loggias Country houses, cottages Eliminating the «bridges of cold» 8

9 Effectiveness of material is proved not only in the harsh Siberian conditions, but also in many other regions of Russia: Yuzhno-Sakhalinsk, 28 residential buildings were completely insulated for 47 days. The cost of insulation is 2 times lower hinged facades and 7 times faster Yuzhno-Sakhalinsk - thermal insulation of facades, tinting in any color 9

10 In the autumn of 2009 in Moscow children's educational institution made the facade insulation using coating thickness of 1 mm., the thickness of pipeline coating mm. After applying the material FCM Ceramic reduced coolant flow rate by 55% The thermal resistance of the wall increased by 30.5% 10

11 is successfully used for thermal insulation of houses and sports facilities. Krasnoyarsk, insulation of the ice rink from the inside Krasnoyarsk, insulation of the cottage 11

12 , due to its structure allows you to insulate the complex constrained designs that are not insulated by conventional methods Krasnoyarsk - insulation of the facade of the Big Concert Hall Krasnoyarsk - warming of the base and a rampant, eliminating «bridges of cold» BC "Gold" Krasnoyarsk, settlement Pines - warming wood walls Krasnoyarsk, apartment pr.svobodny - floor insulation 12

13 Lower operating costs during the heating season, by reducing heat loss. Lower operating costs for air conditioning indoors, by insulating of the roof and walls of the building. Reducing direct costs of the construction of buildings and structures due to the possibility of reducing the thickness of the walls, the size of the foundations. The possibility of replacing cumbersome insulation systems of facades, walls of buildings by the material TSM Ceramics. High service life of the material (at least 30 years). 13

14 TSM Ceramic is widely used in heat and power engineering Pipelines of thermal heating systems Steam lines and gas pipelines Air conditioning systems ( condensation Pipes with cold water (to avoid Steam boilers Valving Tanks and reservoirs 14

15 is successfully used for thermal insulation of tanks and gas-holders. Achinsk, "Rosneft" Insulation of the storage tanks of petroleum products 15

16 used for insulating oil and gas pipelines as a ground and underground installation. Insulation of water and oil tanks 16

17 widely used for thermal insulation of carriages and locomotives Insulation of locomotive cabin 17

18 Insulating of heating main Insulation of pipelines Krasnoyarsk, PNS North - insulation of pipelines and equipment 18

19 Competitive price of in comparison to commonly used insulation.. Reduced labor costs and time using by simplicity and ease of handling. Reducing of repair costs due to accidents visibility and easy maintainability. Reducing of the cost of thermal energy saving in pipes, boilers, etc. due to the high thermal insulation characteristics of the and full insulation of pipes, boilers, etc., even in the most hard to reach places. The possibility of applying directly the to hot surface (up to 150 C) without stopping current district heating network or boiler. Reducing of the repair costs of thermal insulation by increasing the warranty period, compared with standard insulation. No costs for the restoration of the insulation due to lack of the possibility of secondary use (vandal resistance) 19

20 TSM Group Moscow, Sushchevskiy Val Street 16/4 phone: