WE stock up for YOU! Here you will find our new stock dimensions!
|
|
- Thomas Miles
- 7 years ago
- Views:
Transcription
1 LUMINIUM Profiles Tubes Fence ystems WE stock up for YOU! Here you will find our new stock dimensions! Ingrid L. LECH Ges.m.b.H. IMPORT - EXPORT -60 NEUNKIRCHEN, Triftweg 10 Tel Fax export@blecha.at
2 profiles in alloy: EN W-6060 T66 (lmgi 0,5 F) EN W-6060 T66 (lmgi 0,5 F) L = 6m D x kg/m RR 1 x 1 (6,1m) 0,093 RR 50 x 6, RR 15 x 5 5,090 RR 135 x 5 5,514 RR 170 x 10 13,573 RR 180 x 10 14,4 round tubes D EN W-6060 T66 (lmgi 0,5 F) L = 6m x x kg/m FR x 5 x 3 0,956 FR 60 x 30 x,5 1,148 FR 70 x 30 x 3 1,53 FR 70 x x 4,03 FR 1 x 0 x 3,495 FR 1 x 80 x 6 6,739 FR 150 x 60 x 4 4,363 FR 00 x 0 x,333 FR 00 x 100 x 5 7,830 FR x 100 x 5 8,910 FR 50 X X 3 4,601 rectangular tubes EN W-6060 T66 (lmgi 0,5 F) L = 6m x x kg/m FR x x R 0,81 FR 100 x x,5 R 10 1,71 FR 00 x 00 x 8 R 5 16,55 FR 300 x 10 x 5 R,5 11,057 tubes with round corners R EN W-6060 T66 (lmgi 0,5 F) L = 6m x x kg/m L 5 x 5 x 5 0,608 L x 0 x 1,5 0,37 L 80 x x 8,419 L 100 x x 6,171 L 10 x 10 x 1 7,387 L 150 x 80 x 6 3,69 L 150 x 100 x 5 3,308 L 180 x 80 x 6 4,115 angles 1
3 EN W-6060 T66 (lmgi 0,5 F) L = 6m x x x kg/m U 5 x x 5 x 4 0,886 U 60 x x 60 x 4 1,64 U 5 x 50 x 5 x 3 0,761 U x 70 x x 4 1,534 U x 80 x x,5 1,046 U x 80 x x 6,398 U 60 x 1 x 60 x 8 5,70 U 50 x 00 x 50 x 5 3,915 U 38 x 60 x 38 x 3,673 u-channels EN W-6060 T66 (lmgi 0,5 F) L = 6m x kg/m FL 45 x 30 3,645 FL 55 x 8 1,188 FL 70 x 35 6,615 FL 75 x 5 1,013 FL 80 x 60 1,960 FL 90 x 9,70 FL 100 x 60 16,00 FL 110 x 10,970 FL 10 x 1,960 FL 130 x 15 5,65 FL 1 x 0 7,560 FL 160 x 1 5,184 FL 300 x 5 4,050 flat bars EN W-6060 T66 (lmgi 0,5 F) L = 6m x x C x 1 x kg/m Z 17 x 5 x 17 x x 0,97 Z 15 x x 15 x x 0,356 Z x 60 x x 4 x 4 1,46 Z x 70 x x 3 x 3 1,166 Z x 86 x x 3 x 3 1,96 z-sections 1 1 C EN W-6060 T66 (lmgi 0,5 F) L = 6m x x kg/m T 35 x 35 x 4 0,713 T 70 x 70 x 8,851 T 80 x 80 x 7,89 t-sections
4 anodised profiles E6C0 15 my EN W-6060 T66 L = 6,15m anodised E6/C0 15 µm x x kg/m L 0 x 0 x 0,05 L 5 x 5 x 0,59 L 30 x 0 x 0,59 L 30 x 30 x 0,313 L x 0 x 0,313 L x x 0,41 anodised angles E6C0 15 my EN W-6060 T66 L = 6,15m anodised E6/C0 15 µm x x x kg/m U 0 x 15 x 0 x 1,5 0,1 U 30 x 15 x 30 x 0,9 U 5 x 5 x 5 x 0,383 U 0 x 30 x 0 x 0,356 U 30 x 30 x 30 x 0,464 U 0 x x 0 x 0,410 U x x x 0,66 anodised u-channels E6C0 15 my elbows 90 alloy W x radius EN W x elbows 90 3
5 profiles in alloy: EN W-608 T6 (li1mgmn) ENW-608T6(li1MgMn) D x kg/m RR 90 x 15 (3m) 9,543 RR 150 x 5 (5m) 6,507 round tubes D ENW-608T6(li1MgMn) x kg/m VK 65 x 65 (3m) 11,8 square bars profiles in various alloys ENW-007T6(lCu4PbMgMn)L=3m x kg/m FL x 5,85 flat bars EN W-04 T3 drawn (lcu4mg1) L = 6m D x kg/m RR 1 x 1 0,096 RR 14 x 1 0,114 RR 30 x 3 0,707 round tubes D EN W-1350 /El 99,5 H11 D kg/m RD 30 1,909 round bars D 4
6 special photovoltaic profiles in alloy: EN W-6060 T66 (lmgi 0,5 F) PV 01 mounting rail profile x length 6500 mm PV 0 mounting rail profile x length 6500 mm PV 03 mounting rail profile x length 6500 mm PV 04 mounting rail profile x length 6500 mm 5 lamella plugs for PV 01 and PV 0 x RL plastic PP Copo
7 special profiles in alloy: EN W-6060 T66 (lmgi 0,5 F) P15 lamella x 46 x mm Possibility to assemble with following u-channels: U 0x30x0x3 U 30x30x30x3 U x30xx3 U 50x30x50x3 U 0x50x0x U 5x50x5x U 30x50x30x U 50x50x50x P115 lamella decor x 60 x mm Possibility to assemble with following u-channels: U 0xx0x3 U 5x65x5x,5 U 5xx5x3 U 55x65x55x,5 U 30xx30x3 U xxx3 U 60xx60x
8 special profiles in alloy: EN W-6060 T66 (lmgi 0,5 F) 116 P1151 lamella x 60 x mm Possibility to assemble with following u-channels: U 0xx0x3 U 5xx5x3 U 30xx30x3 U xxx3 U 60xx60x3 U 5x65x5x,5 U 55x65x55x, fixing example lamella P1151 with u-channel 55 x 65 x 55 x,5 u 55 x 65 x 55 x,5 7 u 55 x 65 x 55 x,5
9 special profiles in alloy: EN W-6060 T66 (lmgi 0,5 F) 0 P 40 folding bar profile x 0 x 60 P 441 folding bar profile 60 x x P 44 folding bar profile 80 x x 0 x ,8 30 1,8 10,5 10,5 19,7,5 P45 enclosure profile x 0 x 1,8 19,7,5 P53 enclosure profile 50 x 30 x 1,8 8
10 special profiles in alloy: EN W-6060 T66 (lmgi 0,5 F) ,45 0 1, ,3 30 P10 aviary profile 30 x 0 length 6100 mm 3,3 P11 aviary profile x 0 length 6100 mm 30 6 P1354 smoking rod dm 30 length 6050 mm aluminium sheet perforated alloy: EN-W 1050 (l99,5) division = spacing from middle to middle of each hole x x L division x 150 x 500 QG 10x10 15 x 150 x 500 QG 0x0 50 x 1500 x 3000 QG 10x10 15 x 1500 x 3000 QG 0x0 50 x x L division 1 x 1000 x 000 RV 8 1 9
11 fence profiles in alloy: EN W-6060 T66 (lmgi 0,5 F) P 081 lath plane 80 x 19 mm P 845 hand rail profile 80 x 45 x 1,8 mm inside width 61,1 mm for 60 mm standings 10
12 Export in Czech Republic 46 countries Germany alzburg Linz t. Pölten OÖ UTRI NÖ Wien Eisenstadt lovakia regenz V Innsbruck T T Graz witz Italy K Klagenfurt Hungary lovenia Croatia Visit our website In order to provide even more products on stock, we are currently building a new warehouse for you. aluminium is our business innovation our destination Tel Fax export@blecha.at Ingrid L. LECH Ges.m.b.H. IMPORT-EXPORT -60 NEUNKIRCHEN, Triftweg 10
UNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationAluminium and aluminium alloys Ð Extruded rod/bar, tube and profiles Ð
BRITISH STANDARD BS EN 755-7:1998 The European Standard has the status of a British Standard ICS 23.4.15; 77.15.1 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Aluminium and aluminium
More informationToyota Hilux Genuine Tray Bodies
Toyota Hilux Genuine Tray Bodies Hilux Product Range Aluminium Trays Single Cab PZQ8489505 General Purpose Aluminium Features GPA deck Quick Lock Dropsides & Tailgate Latch knobs 16 Internal Load Restraint
More informationSöll GlideLoc Aluminium Ladders. Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073
Söll GlideLoc Aluminium Ladders Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073 7 Söll GlideLoc Aluminium ladders Y-spar Profile 52 x 51 mm With connector Mounting
More informationD y n a mic. Fl e x ible. Simple. MODULAR SYSTEMS LABORATORY & OFFICE ASSEMBLY WORKPLACES BASICS INTRALOGISTICS PAPERLESS PRODUCTION EDUCATION
Proz Flexible Labor-Arbeitsplatzsysteme Processes conneceted with flexibility Dynamic and flexible solutions Office. Laboratory. Education. MODULAR SYSTEMS LABORATORY & OFFICE ASSEMBLY WORKPLACES BASICS
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationBuyers Guide: Information required:
Buyers Guide: Information required: When ordering, please state: 1 Reference Number of Mesh (include any alphabetical suffix) Conventional/Flattened Mesh Dimensions: 1. For conventional (raised) meshes
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationAMF Line; wall absorbers Wall mounted acoustic designs PERFORMANCE CEILINGS. M ore s c op e f or i n n ovat i on MADE IN GERMANY
PERFORMANCE CEILINGS M ore s c op e f or i n n ovat i on AMF Line; wall absorbers Wall mounted acoustic designs MADE IN GERMANY 138568_Prospekt Wandabsorber_GB int.indd 1 Acoustic elements on the wall
More informationMaximum and minimum problems. Information sheet. Think about
Maximum and minimum problems This activity is about using graphs to solve some maximum and minimum problems which occur in industry and in working life. The graphs can be drawn using a graphic calculator
More informationALUMINIUM SYSTEMS S.A.
ΡΟΛΑ ΑΠΛΑ και ΘΕΡΜΟΜΟΝΩΤΙΚΑ NORMAL & THERMAL INSULATING ROLLER SHUTTERS ALUMINIUM SYSTEMS S.A. ALUMINIUM SYSTEMS S.A C.AL.COM,.,,,.,,.. C.AL.COM. C.AL.COM. About us C.AL.COM is a modern dynamic commercial
More informationSheet metal operations - Bending and related processes
Sheet metal operations - Bending and related processes R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Table of Contents 1.Quiz-Key... Error! Bookmark not defined. 1.Bending
More informationAccessories, Foot Caps, Spare Parts
Accessories,, Spare Parts Inset Hooks For inseration in supportable tubes ca. ø 30 mm On request further hook designs available Mast Claw For safe attachment of rung ladders on masts with a dimension from
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationAn introduction to selling blinds
An introduction to selling blinds We are a small family owned independent blind manufacturer. We have been manufacturing blinds for trade and contract customers since 1991, from our factory in Hevingham
More informationAluminium Standard. Technical Data. Included in delivery
luminium Standard UL / cul Robust aluminium enclosure for mechanical engineering and automation technology Fixing options for s and mounting plates Usable in wide temperature area Technical ata aterial:
More informationLIBERA USER S MANUAL
USER S MANUAL 2002 Litec s.r.l. Italy All rights reserved. No parts of this manual can be reproduced, without permission of Litec s.r.l. Cod. Version 2 Pag. 2 di 23 INDICE 1. Introduction.... 3 2. The
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More informationSPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.
SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.
More informationInstallation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms
Edition: 1997-1 1-01 ldentical (IDT) with EN 1474:1997 Supersedes 1 ICS 75.200 Installation and equipment for liquefied natural gas - Design and testing of loadinglunloading arms Anlagen und Ausrüstung
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationVCE VET ENGINEERING STUDIES
Victorian Certificate of Education 2013 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES Written examination Section Wednesday 20 November 2013
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationSheet Metal Design: Beyond Bends and Flanges
11/30/2005-8:00 am - 9:30 am Room:Pelican 1 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Sheet Metal Design: Beyond Bends and Flanges Anthony B. Rodriguez - KETIV Technologies MA31-2
More informationHS-Steel-Classic. Curing chambers for the concrete block industry in a proven steel version
ANLAGENTECHNIK HS-Steel-Classic Curing chambers for the concrete block industry in a proven steel version + special galvanising + simple assembly due to snap-in connections and building kit system We build
More informationArchitectural Canopy Schematic Available in: Mill Finish & Anodized; Various Lengths & Alloys ENGINEERING AVAILABLE UPON REQUEST
Architectural Canopy Schematic Available in: & Anodized; Various Lengths & Alloys ENGINEERING AVAILABLE UPON REQUEST Back Gutter Fascia Hanger Arm: Square Tube, Round Tube or Pipe Pans Architectural Canopy:
More informationStainless Steel Section...
Structural & Decorative Tube Bar & Sections Seamless Tube Hygienic Tube Structural & Decorative Tube Aluminium Butt Weld Fittings Hygienic Fittings Architectural Stainless Steel Rolled Products Mirror
More informationDRAWING INSTRUMENTS AND THEIR USES
Chapter - A DRAWING INSTRUMENTS AND THEIR USES Drawing Instruments are used to prepare neat and accurate Drawings. To a greater extent, the accuracy of the Drawings depend on the quality of instruments
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationPV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY
PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY Tile on-roof PV Mounting System Installation on tiles roof. Various quick roof hooks with different strength and structure are available.
More informationTallahassee Community College PERIMETER
Tallahassee Community College 47 PERIMETER The perimeter of a plane figure is the distance around it. Perimeter is measured in linear units because we are finding the total of the lengths of the sides
More informationLarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves
LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly
More informationGate Leg Drop Leaf Table Plans
Preparing the table top blanks: Cut and glue enough 3/4 stock to make three panels 40 long by 24 wide (they will be cut to final size at a later time). While the glue dries we will work on the legs. Preparing
More informationThe Miniature Railway Supply Co. Ltd.
The Miniature Railway Supply Co. Ltd. 42 Stratford Way, Boxmoor, Hemel Hempstead, Herts, HP3 9AS, England Telephone, Fax and Answerphone: 01442 214702 E-mail: sales@mrsc.org.uk www.mrsc.org.uk 2005A Contents
More information6.0 FIXATION CLIPS. Fixation clips. Fixation clips 6.0. WKK: producer of fixation clips
6.0 Fixation clips Fixation clips 6.0 WKK: producer of fixation clips Through our subsidiary WKK Automotive, WKK has access to its own production facility for the development and production of plastic
More informationAccess Server Rack Cabinet Compatibility Guide
Access Server Rack Cabinet Compatibility Guide A Guide to the Selection and Evaluation of Access Server Rack Cabinets for Compatibility and Use with Third Party Server Chassis Kalkenstraat 91-93 B-8800
More informationRe-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationCHAPTER 29 VOLUMES AND SURFACE AREAS OF COMMON SOLIDS
CHAPTER 9 VOLUMES AND SURFACE AREAS OF COMMON EXERCISE 14 Page 9 SOLIDS 1. Change a volume of 1 00 000 cm to cubic metres. 1m = 10 cm or 1cm = 10 6m 6 Hence, 1 00 000 cm = 1 00 000 10 6m = 1. m. Change
More informationHOTCHKISS AIR SUPPLY Heating, Ventilating & Air Movement Equipment
HOTCHKISS AIR SUPPLY Heating, Ventilating & Air Movement Equipment F l a t O v a l T u b e a n d F i t t i n g s Introduction Hotchkiss Flat Oval ductwork offers all the advantages of rectangular ducts
More informationPhotovoltaic Cell: Converting Light to Electricity
Photovoltaic Cell: Converting Light to Electricity Outcomes: 1. Understand that a photovoltaic cell produces DC voltage when light shines on its surface. 2. Understand that the electrical voltage produced
More informationTubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
More informationHave questions? Feel free to contact us to help you create your custom suite order. WEDDING COLLECTION PRICING HOW TO BUILD YOUR CUSTOM SUITE:
c s CHIPS AND SALSA DESIGNS unexpected paper goods WEDDING COLLECTION PRICING Thank you for your interest in Chips and Salsa Designs, a paper goods company dedicated to providing clients exceptionally
More informationInstallation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationDECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001
NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)
More informationPRODUCT DATA SHEET T-LIFT DESK
T-LIFT DESK The height-adjustable desk allows you to alternate at work between sitting and standing. Formally minimalist; visually and technically based on the T-Platform. To be used for desk-sharing applications
More informationTY-FLO Needle Valves
Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted
More informationPREMIUM CLASS PHOTOVOLTAICS
PREMIUM CLASS PHOTOVOLTAICS ENGLISH A CNBM COMPANY PREMIUM CLASS PHOTOVOLTAICS Our successful flagship is the brand PowerMax. PowerMax modules offer a high energy yield (kwh per kwp), possible due to broad
More informationFLEXIBLE COPPER & ALUMINIUM CONNECTIONS. Product Range 1 VGL - ALLIED CONNECTORS
Product Range ROUND STRANDED COPPER CABLE Electrolytic Copper / Oxygen Free Copper Conforms to DIN 46438 Standards Finish: Bare Copper / Tinned / Silver-plated ROUND BRAID / ROUND STRANDED CABLE WITH OVERALL
More informationfilm capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm
MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5/37.5mm 10 and 15mm 22.5 and 27.5mm QUICK REFERENCE DATA Capacitance range (E6 series) * Capacitance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
More informationThe complete range. Shower Hardware Doors & Partitions Balustrades Post Railings Glass Windscreens Glass Canopies
The complete range Shower Hardware Doors & Partitions Balustrades Post Railings Glass Windscreens Glass Canopies Serenity Series Sliding Door System Specifications Glass Thickness: 8mm or 10mm Toughened
More informationCOMMUNICATION FROM THE COMMISSION
EUROPEAN COMMISSION Brussels, 17.9.2014 C(2014) 6767 final COMMUNICATION FROM THE COMMISSION Updating of data used to calculate lump sum and penalty payments to be proposed by the Commission to the Court
More informationR310EN 2225 (2011.04) The Drive & Control Company
Ball Rail Systems Resist NRII R310EN 5 (011.04) he Drive & Control Company R310EN 5 (011.04) Ball Rail Systems Resist NR II Bosch Rexroth AG 3 Ball Rail Systems Resist NRII General Product Description
More informationTECHNICAL MANUAL AWNINGS STELA, JASMINA, ISABELA, LAURA
TECHNICAL MANUAL AWNINGS STELA, JASMINA, ISABELA, LAURA EN MARKISE Contents - Awnings CE product marking 4 Jasmina awning without load-bearing profile 5 Basic technical specification 6 Stela awning with
More informationDECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001
NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009
More informationMONDOATHENS BASKETBALL SET (Reference PK110)
MONDOATHENS BASKETBALL SET (Reference PK110) DESCRIPTION The MONDOATHENS backstop unit is mainly designed for multi-sports pavilions and installations where the highest-level basketball competitions are
More information16 Circles and Cylinders
16 Circles and Cylinders 16.1 Introduction to Circles In this section we consider the circle, looking at drawing circles and at the lines that split circles into different parts. A chord joins any two
More informationAISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels
AISI CHEMICAL COMPOSITION LIMITS: Nonresulphurized Carbon Steels AISI No. 1008 1010 1012 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 10 1026 1027 1029 10 1035 1036 1037 1038 1039 10 1041 1042 1043
More information39HQ Airovision Air Handling Units
39HQ Airovision Air Handling Units Mounting instructions CONTENTS 1 - TRANSPORT AND LIFTING INSTRUCTIONS... 3 1.1 - General... 3 1.2 - Transport and storage... 3 1.3 - Roof edge protection during transport
More informationAluGrid product sheet
AluGrid The flat roof system with optimized superimposed load quick, simple and mainly tool-free mounting reduced number of components economically effi cient system structural analysis based on the latest
More informationSECTION 4: Cable Ladder Stainless Steel & Aluminium
SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General
More informationAssessment For The California Mathematics Standards Grade 4
Introduction: Summary of Goals GRADE FOUR By the end of grade four, students understand large numbers and addition, subtraction, multiplication, and division of whole numbers. They describe and compare
More informationINSTRUCTIONS FOR CHAIN LINK INSTALLATION Chain Link fence & Posts Meshdirect.co.uk
INSTRUCTIONS FOR CHAIN LINK INSTALLATION Chain Link fence & Posts Meshdirect.co.uk This guide explains how to correctly install our chain link fencing and post system. The guide provides details of the
More informationHOW TO BUILD A LOU-VEE-AIRCAR
HOW TO BUILD A LOU-VEE-AIRCAR MATERIALS (PER CAR) 1. One sheet of legal-sized paper 2. Three standard paper clips 3. One butterfly paper clip 4. One plastic soda straw 5. Two large index cards 6. Narrow
More informationDiffractive Optical Elements (DOE) for FLEXPOINT Laser Modules
With the help of DOEs it is possible to turn a simple laser dot into a variety of different beam patterns. All DOE s can be used with FLEXPOINT laser modules, either fixed to the module or removable in
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationMiracel 19 rack platform for data center, telecommunication and network technology. Rack & Integrated Enclosure Systems
Miracel 19 rack platform for data center, telecommunication and network technology Rack & Integrated Enclosure Systems The Miracel innovation rack multi-talented, distinguished, integrative The Miracel
More informationHow To Design An Injection Moulded Union
Aadorf, May 2005 New design for PVDF and PA unions New look thanks to est development technology In designing injection moulded products, utmost attention must be awarded to several factors, such as the
More informationXL PREMIUM OIL COOLER KIT
-J05 REV. 0-0-0 XL PREMIUM OIL COOLER KIT GENERAL Kit Number 0008 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationASSEMBLED SOCKET-COMBINATIONS
ASSEMBLED SOCKETCOMBINATIONS Enclosure extra strong, schockresistant easily open, it provides a comfortable mount it can be connected across a cable gland it consists of a 35 mm mounting rail Window 6
More informationImportant Information
Single Door Quadrant Instruction Manual ESQ Important Information Toughened glass is completely safe for use in our shower enclosures and bath screens; providing our products are installed according to
More informationDTU Animal Cart Programme
DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523
More informationToll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com
Toll-Free: 800-272-8946 Telephone: 630-562-1400 Website: www.vogeltool.com Supercharge your Fence & Gate Manufacturing Only $3,650! Vogel s 25 Ton Power Tower Model Tonnage Power Requirements Power Connection
More informationBUILDINGA 1/10 SCALE FLATBED TRAILER
VOLUME 1, ISSUE 1 BUILDINGA 1/10 SCALE FLATBED TRAILER BUILT, DESIGNED & WRITTEN BY NATHAN MYERS MATERIALS: FEATURES: While the design was kept simple to allow anyone to be able to build their own trailer,
More informationPRODUCTS. Stainless Steel (Ferritic & Austenitic) Aluminised Steel Mild Steel Titanium
S u p p l i e r s o f H i g h Q u a l i t y P e r f o r a t e d S t a i n l e s s S t e e l Tu b i n g THE COMPANY The Joint Perforating Company, established in 2001 has re-invented the perforating process.
More informationItem #: BTOL Assembly Instructions
Item #: BTOL Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www.walkeredison.com
More informationWorking Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
More informationCADprofi Fast switching between symbols views/variants
12.03 Fast switching between symbols views/variants A possibility to quickly switch variants or views of symbols has been added to the program. Thanks to this user can easily change the selected symbol
More informationIncorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles
Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract
More informationLunette 2 Series. Curved Fixed Frame Projection Screen. User s Guide
Lunette 2 Series Curved Fixed Frame Projection Screen User s Guide Important Safety and Warning Precautions Please follow these instructions carefully to ensure proper maintenance and safety with your
More informationThe WANZ Guide to Window Installation
The WANZ Guide to Window Installation as described in E2/AS1 Amendment 5 Ver. 1.1 Page 2 of 74 Contents Overview Page 5 Objective Page 5 Scope Page 5 Opening Preparation Page 7 Step P1 Preliminary Check
More informationCompact pressure switch Flameproof enclosure Ex d Model PCA
Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationCHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS
CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical drawings,
More informationP System Cubicles. Certified for more safety
P System Cubicles Prisma Plus LV Switchboards Certified for more safety Prisma Plus, an offer thought out for greater professionalism With the Prisma Plus P system, Schneider Electric proposes high-performance
More informationpaperless picking systems
paperless picking systems PAPERLESS PICKING SYSTEMS FAST PICKING SATISFIED CUSTOMERS Short warehouse access times and reliable supply quality. SSI SCHäFER PEEM Pick by Light is a semi-automatic, paperless
More information06 / 2003. Optional components. MAXDATA PLATINUM Server-Rack PLATINUM. [Product Guide] www.maxdata.de
D Positioning Key-Features Specifications Optional components MAXDATA PLATINUM Server-Rack PLATINUM [Product Guide] www.maxdata.de Positioning Description Server-Racks with 41U, 37U and 23U Highlights
More informationOGi Architectural Metal Solutions
SUNSHADE CATALOG 2009 A B O U T U S Corporate Headquarters - Operating in accordance with NAAMM standards, Ohio Gratings, Inc. began operations in Canton, Ohio in 1970 and expanded from 8,000 square feet
More informationSheet Metal Bending. By- Prem Mahendranathan
Sheet Metal Bending By- BENDING n Bending is a manufacturing process by which a metal can be deformed by plastically deforming the material and changing its shape n Deformation about one axis PROFILES
More informationUBBINK SOLAR IN-ROOF SYSTEM
UBBINK SOLAR IN-ROOF SYSTEM The integrated solar mounting system Installation guide UBBINK SOLAR IN-ROOF SYSTEM Table of contents Solar In-Roof System introduction System components Installation guide
More informationOptical laser beam scanner lens relay system
1. Introduction Optical laser beam scanner lens relay system Laser beam scanning is used most often by far in confocal microscopes. There are many ways by which a laser beam can be scanned across the back
More informationEUPEN Cable Inc. North & South America
toronto EUPEN Cable Inc. North & South America Bethlehem, PA dallas, tx Mexico city Tampa Bay EUPEN CABLE INC. Table of Contents ELLIPTICAL WAVEGUIDE and Connectors.................................................5
More informationLayher. Keder Roof and Hall System. F a s t. L i g h t w e i g h t. C o s t e f f e c t i v e.
Weather protection in lightweight design, made of aluminium Verified structural strength Certification according to DIN ISO 9001/EN 29 001 by TÜV-CERT Keder Roof and Hall System F a s t. L i g h t w e
More information