Need To Miss a Class?

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Need To Miss a Class?"

Transcription

1 Need To Miss a Class? Please Call & Let Us Know (727) Please call at least 24 hours prior to your scheduled class to prevent forfeiture of the class you re seeking to cancel. Your call will free up space for other students looking to find a makeup spot.

2 SAFETY IN THE STUDIO No eating or smoking in your work area - you are using lead and chemical products. Clothing: Wear short-sleeved shirts, long slacks and closed-toe shoes Hair: Pull long hair back Handle glass carefully. Always assume there are sharp edges. Grinders and Saws: Always use safety glasses even over prescriptions glasses. Glass shards may chip your prescription frames and lenses. It s a good idea to wear an apron or smock when using these tools, cutting glass or using chemicals. Soldering Irons: Soldering irons may reach 1000 degrees. Use a sturdy soldering iron rest don t lay your hot iron on your work surface. Focus on what you re working on when a soldering iron is on. Remember a soldering iron takes several minutes to cool down after being unplugged. Use soldering irons in a well ventilated area. Kilns: The glass kilns are to be used with extreme caution! Temperatures of kilns in use can reach 1700 degrees. Always assume they are hot when walking nearby. Cuts and Burns: Clean cuts and burns as soon as possible and apply appropriate antibiotic ointment and bandage. Don t allow children in your work area unsupervised.

3 GLASS FUSING CLASS SYLLABUS - In this glass course you will gain understanding of the following: Glass tools and the correct usage. Kiln operation is optional. Scoring, cutting and breaking art glass into various shapes. Methods of cutting glass shapes with cathedral and opalescent glass. Types of art glass used in glass fusing. - Coefficient of Expansion. Cathedrals, Opalescents Iridescents and Dichroics Molds for slumping and draping. Care and handling. Kilns and How they Work - Heating and Annealing Glass Designing your fused glass art: Fusing Stages - Full Fuse, Dimensional Fuse, Tack Fuse Cutting and layering glass for textural effects. Frit Enamels Fiber products Wire and metal inclusions Use of fusers' glue, craft glue, nail polish and hair spray Hanging your fused glass art - Wire loops, channels, drilling Readying your finished glass project for the kiln cleaning and handling, kiln firing paper or kiln wash?, firing instructions A beginning student will select a mold, design and cut glass for their art projects with the assistance of instructors. It is beneficial to look online for fused glass items to get an idea of the types and or style of items you might be interested in creating prior to each class. Intermediate students will progress their skills and techniques in design and production. Advanced techniques are taught in private lessons only. Projects should not be larger than 20 x 20 in size for group classes. Fusing fees for projects created during class periods are included in your class fee. Additional fees are charged for large projects, bottle slumping and fusing projects created outside of class. We will be happy to fire your art piece with ceramic firing paper you have purchased. Students are to bring their personal projects and items home after each class session. Supplies you will purchase include a variety fusible sheet art glass, compatible stringers, noodles, dichroic glass, copper, nichrome or fine silver wire, fusing enamels, copper inclusion metal, precut glass shapes, fusing glue, firing paper, fiber sheets and boards, exacto knife, and jewelry bases, bails, or other gift accessories. Our studio is equipped with a variety of glass cutters, breaking tools, glass grinders, and other tools and equipment. You are most welcome to use these during your class period.

4 CLASS SUPPLY LIST Item Copper Foil Leading Fusing Mosaics Wire Wrapping 91% Rubbing Alcohol Safety Glasses Black & Silver Sharpie Markers Band-Aids Masking Tape Glue Stick Weldbond Glue E6000 Glue Fusers' Glue, Craft Glue or Clear Nail Polish Hair Spray - unscented Cotton Balls Q-Tips Disposable latex gloves Ziploc Bags Apron Plastic Box OPTIONAL ITEMS: Glass cutter Cutter oil Running Pliers Grozers/Breakers Wheeled Nippers Lead Dykes (Nippers) Needle-nose Pliers Corked-back Ruler Plywood Workboard

5 Glass Cutting Exercises Outside Curve Straight Line Inside Curve Slight Curve Circle

Make your own glass jewellery, anyone can do it!

Make your own glass jewellery, anyone can do it! User manual Make your own glass jewellery, anyone can do it! INTRODUCTION With the HotPot you can melt glass in a microwave to create jewellery or glass components for jewellery and other creative purposes.

More information

Offset Pendants. Availability

Offset Pendants. Availability Offset Pendants The Offset Square Pendants and Offset Round Pendants can be filled in a multitude of ways creating everything from simple, everyday jewelry to dramatic, one-of-a-kind pieces. nnn Preparing

More information

Conservation of Momentum Greg Kifer

Conservation of Momentum Greg Kifer SCIENCE EXPERIMENTS ON FILE Revised Edition 6.7-1 Conservation of Momentum Greg Kifer Topic Conservation of momentum Time 1 hour! Safety Please click on the safety icon to view the safety precautions.

More information

Etching using chemicals

Etching using chemicals Etching using chemicals Free tutorial Artsandtechniques.com Arts and Techniques School RJDS inc. Etching using chemicals There are several ways to etch metal, this technique uses a chemical. The etching

More information

Casting Candle Holders with Colour de Verre Molds

Casting Candle Holders with Colour de Verre Molds Casting Candle Holders with Colour de Verre Molds Cast a glass candle holder from frit using Colour de Verre reusable molds. Students will learn how to prime molds, create frit mixtures, and fill and fire

More information

Using Paper Chromatography to Separate Ink Virgil A. Sestini

Using Paper Chromatography to Separate Ink Virgil A. Sestini SCIENCE EXPERIMENTS ON FILE Revised Edition 5.31-1 Using Paper Chromatography to Separate Ink Virgil A. Sestini Topic Paper chromatography Time 1 hour! Safety Please click on the safety icon to view the

More information

Measuring Quartz Crystals

Measuring Quartz Crystals 1.2-1 SCIENCE EXPERIMENTS ON FILE Revised Edition Measuring Quartz Crystals Gary L. Stringer Topic Interfacial angles of crystals Time 30 minutes! Safety Please click on the safety icon to view the safety

More information

Potato Battery Lois Fruen and Chelen Johnson

Potato Battery Lois Fruen and Chelen Johnson SCIENCE EXPERIMENTS ON FILE Revised Edition 5.40-1 Potato Battery Lois Fruen and Chelen Johnson Topic Construction of a battery Time 45 minutes to 1 hour! Safety Please click on the safety icon to view

More information

This great technique will help you to make a perfectly flat backed mold, without distorting your casting when removing it from the mold.

This great technique will help you to make a perfectly flat backed mold, without distorting your casting when removing it from the mold. This great technique will help you to make a perfectly flat backed mold, without distorting your casting when removing it from the mold. Click here for instructions for using our Flexible Molds. What are

More information

The Boltzmann Distribution Lee Marek

The Boltzmann Distribution Lee Marek 5.27-1 SCIENCE EXPERIMENTS ON FILE Revised Edition The Boltzmann Distribution Lee Marek Topic Distribution of kinetic energy Time 30 minutes! Safety Please click on the safety icon to view the safety precautions.

More information

SOIL TEMPERATURES. Introduction. Time Needed. What You Need. Safety Precautions

SOIL TEMPERATURES. Introduction. Time Needed. What You Need. Safety Precautions SOIL TEMPERATURES Introduction The temperature of soil is determined by factors such as season, soil type, moisture content, and weather conditions. Depth also affects soil temperature, since a layer of

More information

Lesson One: Etching with Vinyl

Lesson One: Etching with Vinyl Lesson One: Have you ever wanted to learn the art of glass etching but aren t sure where to start? Are you etching but not getting the finish you d like? We ll explore how to use the Silhouette Cutting

More information

Get The Oxidized Look Without Oxidizing

Get The Oxidized Look Without Oxidizing 1 Get The Oxidized Look Without Oxidizing Love the oxidized look? So do I but oxidation methods will only work with certain types of metal. For instance, stainless steel, titanium, tantalum and niobium

More information

LOOK! DG624 MANUEL SUAREZ KIM SAUVÉ

LOOK! DG624 MANUEL SUAREZ KIM SAUVÉ LOOK! DG624 MANUEL SUAREZ KIM SAUVÉ CONTENTS 3 MOODBOARD 10 SKETCHES 20 MODELS 36 FINAL PRODUCT 39 INDIVIDUAL REFLECTIONS 2 MOODBOARD For the first deliverable, we had to do an individual mood board representing

More information

How-To #9: Make a Printed Circuit Board

How-To #9: Make a Printed Circuit Board How-To #9: Make a Printed Circuit Board Background: Fabricating a circuit board is a four-step process. 1. Expose: Use light and a mask to set the image of the desired traces on the circuit board. 2. Develop:

More information

Center of Gravity. Is the center of gravity always the center? In this experiment you will determine the center of gravity of an irregular object.

Center of Gravity. Is the center of gravity always the center? In this experiment you will determine the center of gravity of an irregular object. 4.1 (page 1) Center of Gravity Is the center of gravity always the center? In this experiment you will determine the center of gravity of an irregular object. Gravity is the force that pulls objects toward

More information

MEASURING LENGTH IN METRICS

MEASURING LENGTH IN METRICS MEASURING LENGTH IN METRICS Introduction GENERAL SCIENCE / EASY LEVEL Most science experiments are conducted using measurements in the metric system. Most countries use the metric system; therefore, scientists

More information

Screen Melts. Introduction. Selecting Screen Material. Prefire Before Using. Spalling. Kiln Shelf

Screen Melts. Introduction. Selecting Screen Material. Prefire Before Using. Spalling. Kiln Shelf Introduction There are two terrific reasons for melting glass through screens. First because screen melts produce uniquely intricate patterns not possible any other way and second because it does it using

More information

1.01 C The Pathway to Kitchen Safety

1.01 C The Pathway to Kitchen Safety 1.01 C The Pathway to Kitchen Safety Seven Types of Kitchen Accidents Kitchen accidents lead to injuries that could be prevented by not taking shortcuts. Kitchen hazards are conditions that lead to accidental

More information

The Official and Complete Scale4x4RC Hardbody Painting Tutorial By Shodog

The Official and Complete Scale4x4RC Hardbody Painting Tutorial By Shodog The Official and Complete Scale4x4RC Hardbody Painting Tutorial By Shodog 2006 All rights reserved The following is a guide on how to paint hard plastic (styrene) bodies and get great results. For most

More information

Cedar-Strip Canoe Part 2: Stripping the canoe with cedar strips

Cedar-Strip Canoe Part 2: Stripping the canoe with cedar strips Cedar-Strip Canoe Part 2: Stripping the canoe with cedar strips Now the fun really begins - building the cedar hull and covering it with fiberglass. You ve done the tedious but necessary groundwork, building

More information

Getting Started with Kiln-Fired Glass

Getting Started with Kiln-Fired Glass Spectrum Glass presents: Getting Started with Kiln-Fired Glass Guide to Materials and Procedures Beautiful fused glass projects are easy and fun! Glass Meets Kiln Any kiln with a programmable controller

More information

SMOKED SALMON SMOKER

SMOKED SALMON SMOKER SMOKED SALMON SMOKER I'm going to show you just how easy it is to make gorgeous smoked salmon at home. What you will need:- Some stainless steel wire mesh A large cardboard box 4 x M8 nuts 4 x M8 bolts

More information

A Soaked Potato Nancy C. Griffin

A Soaked Potato Nancy C. Griffin 4.27-1 SCIENCE EXPERIMENTS ON FILE Revised Edition A Soaked Potato Nancy C. Griffin Topic Osmosis Time 10 minutes preparation; 2 days to completion! Safety Please click on the safety icon to view the safety

More information

IRSC BSC2094L Fall 2014 SKINNING THE CAT

IRSC BSC2094L Fall 2014 SKINNING THE CAT SKINNING THE CAT GOAL: to remove or cover as much hair and fat as possible. If it is left exposed they tend to breed fungi which can result in your cat experiencing a phase change to a liquid state. MATERIALS

More information

How Much Sugar Is in Your Chewing Gum? Walter M. Hunter

How Much Sugar Is in Your Chewing Gum? Walter M. Hunter 5.9-1 SCIENCE EXPERIMENTS ON FILE Revised Edition How Much Sugar Is in Your Chewing Gum? Walter M. Hunter Topic Percentage composition of a common substance Time 45 minutes! Safety Please click on the

More information

Images Formed by Plane Mirrors Donald A. Schaefer

Images Formed by Plane Mirrors Donald A. Schaefer SCIENCE EXPERIMENTS ON FILE Revised Edition 6.16-1 Images Formed by Plane Mirrors Donald A. Schaefer Topic Laws of reflection Time 1 hour! Safety Please click on the safety icon to view the safety precautions.

More information

Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic

Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Build a Junior Solar Sprint Model Car Kit Materials: 1 PITSCO Ray Catcher Sprint Kit or Solar Made Junior Solar Sprint Kit 1 White Sheet of Plastic Coated Paper 2 Balsa Sheets (10-1/2 x4 x3/16 ) 2 Alligator

More information

Science Fun for Everyone Project STEM Starters

Science Fun for Everyone Project STEM Starters Science Fun for Everyone Project STEM Starters Ten fun science activities for parents and children Complete this booklet and return the ten attached Experiment Reports to your teacher before Spring Break

More information

How do salt crystals form? In this experiment you will see how crystals grow and how they differ in shape.

How do salt crystals form? In this experiment you will see how crystals grow and how they differ in shape. 4.6 (page 1) Science Projects For ALL Students Crystals How do salt crystals form? In this experiment you will see how crystals grow and how they differ in shape. Most solids are made up of small particles.

More information

Instructions for assembling the WARS Powerpole Distribution Kit. (V2)

Instructions for assembling the WARS Powerpole Distribution Kit. (V2) Instructions for assembling the WARS Powerpole Distribution Kit. (V2) Warning: The construction of this project should only be undertaken by persons with the requisite skills and knowledge and should only

More information

Chesapeake Ceramics Fired-On Images Transfer Paper MS (Multi-Surface) Instructions for Glazed Clay Bisque, Factory Glazed Ware and Fusible Glass

Chesapeake Ceramics Fired-On Images Transfer Paper MS (Multi-Surface) Instructions for Glazed Clay Bisque, Factory Glazed Ware and Fusible Glass Chesapeake Ceramics Fired-On Images Transfer Paper MS (Multi-Surface) Instructions for Glazed Clay Bisque, Factory Glazed Ware and Fusible Glass STEP 1 - Acquiring Images: Photographs, drawings, invitations

More information

A tool is an object made to help the man constructing, repairing, or modifying other objects. E.g.: Wrench Drill Hammer Screwdriver

A tool is an object made to help the man constructing, repairing, or modifying other objects. E.g.: Wrench Drill Hammer Screwdriver HANDOUT 1.TOOLS: A tool is an object made to help the man constructing, repairing, or modifying other objects. E.g.: Wrench Drill Hammer Screwdriver L We can classify them in tools and power tools, power

More information

Parallel Circuits Charles Lang

Parallel Circuits Charles Lang SCIENCE EXPERIMENTS ON FILE Revised Edition 6.20-1 Parallel Circuits Charles Lang Topic Parallel circuits Time 1 1 2 hours! Safety Adult supervision is required. Please click on the safety icon to view

More information

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE YOU BEGIN INSTALLATION. IMPROPER INSTALLATION WILL VOID WARRANTY

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE YOU BEGIN INSTALLATION. IMPROPER INSTALLATION WILL VOID WARRANTY Handscraped Laminate Flooring Collection Warranty This quality laminate flooring is under warranty for 25 years not to fade, wear through or stain. This warranty applies only to the original purchaser

More information

Making an Apple Box Oven

Making an Apple Box Oven saltnprepper.com http://saltnprepper.com/making-an-apple-box-oven?pfstyle=wp Making an Apple Box Oven 1 Apple Box or Cardboard Box Packing Tape Heavy Duty Aluminum Foil Spray Adhesive or Masking Tape and

More information

Great GLASS FUSING PROJECTS

Great GLASS FUSING PROJECTS Great GLASS FUSING PROJECTS Lynn Haunstein INCLUDES FULL-SIZE PATTERNS 40 Great Glass Fusing Projects Lynn Haunstein PHOTOGRAPHS BY ALAN WYCHECK STACKPOLE BOOKS Copyright 2014 by Stackpole Books Published

More information

DASH KIT INSTALLATION

DASH KIT INSTALLATION ÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿ ÿÿÿÿÿ ÿÿ ÿÿÿ ÿÿÿÿÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿÿÿ ÿÿÿÿ ÿÿÿÿ ÿÿ ÿÿÿÿÿ ÿÿÿÿÿÿÿÿ PROUDLY MADE IN THE USA DASH KIT INSTALLATION These instructions are aimed at the do-it-yourself installer. Read

More information

Flashing LED Circuit Assembly Activity

Flashing LED Circuit Assembly Activity Flashing LED Circuit Assembly Activity Project: Each student will build a flashing LED circuit to take home. Skills: Safety first Listening to directions Following directions and diagrams Learning to solder

More information

How to build a Digital Trail Camera using the PixController DigitalEye Trail Camera Kit

How to build a Digital Trail Camera using the PixController DigitalEye Trail Camera Kit Copyright, PixController, Inc. http://www.pixcontroller.com, all rights reserved. How to build a Digital Trail Camera using the PixController DigitalEye Trail Camera Kit Getting Started This tutorial will

More information

from a pencil style torch and pre fluxed soldering paste, you need something to hold the work while

from a pencil style torch and pre fluxed soldering paste, you need something to hold the work while Silver Soldering Hints Russell Barnes Several years ago, I built a cross section model. It had a mast and I created the deadeyes and chain plates for it, rigged the shrouds, and then tied the ratlines.

More information

Applications Round-up with the AnaJet Direct-to-Garment Printer

Applications Round-up with the AnaJet Direct-to-Garment Printer Applications Round-up with the AnaJet Direct-to-Garment Printer Hosted by AnaJet Applications Manager, Paul Green The presentation will begin shortly 1 AnaJet Applications Round-up Before we begin please

More information

3D Rapid Prototype Printer

3D Rapid Prototype Printer 3D Rapid Prototype Printer Introduction Risks & Hazards General Safety Operating Safety Maintenance Operating Procedures Introduction The information contained in this SOP is general in nature. It is advised

More information

MAKING FLYING OBJECTS

MAKING FLYING OBJECTS MAKING FLYING OBJECTS Introduction GENERAL SCIENCE / INTERMEDIATE LEVEL Most of us have had the experience of making paper airplanes. You can change the design and flight abilities of a paper plane by

More information

Let s Explore Electricity Basics!

Let s Explore Electricity Basics! Let s Explore Electricity Basics! Instructor Guide Subject Area Unit Grade Time Science Physical Science 5th grade 45 minutes Overview This lesson provides instruction on static electricity and the two

More information

Roller Thermal Fuse Retrofit Instruction for 2 Series Laminators

Roller Thermal Fuse Retrofit Instruction for 2 Series Laminators Roller Thermal Fuse Retrofit Instruction for 2 Series Laminators (Excludes 44 Inch Laminators) Read & Understand the ENTIRITY of this document and UNPLUG THE MACHINE BEFORE beginning! Tools Needed: From

More information

Lesson Plan for Teaching a Leisure Activity Lesson Title/Topic: Recycled Paper Duration: 2 hours

Lesson Plan for Teaching a Leisure Activity Lesson Title/Topic: Recycled Paper Duration: 2 hours Lesson Plan for Teaching a Leisure Activity Lesson Title/Topic: Recycled Paper Duration: 2 hours Necklaces Learning By participating fully in this activity, student will be able Objectives/Outcomes to:

More information

General Laboratory Equipment

General Laboratory Equipment General Laboratory Equipment 1 Science Laboratory Workbench Purpose: This is a simple science all-purpose worktable that can be easily built in any home or schoolroom. The laboratory contains a power supply,

More information

Bill of Materials: Line Follower: A Zippy Robot That Senses Where to Go PART NO. 2170783

Bill of Materials: Line Follower: A Zippy Robot That Senses Where to Go PART NO. 2170783 Line Follower: A Zippy Robot That Senses Where to Go PART NO. 2170783 This kit has the parts you'll need with the exception of a few craft items sold separately to make a line-following cart. It uses a

More information

Armstrong Do-It-Yourself Tile Installation System

Armstrong Do-It-Yourself Tile Installation System Armstrong Do-It-Yourself Tile Installation System What tools will I need to install my tile floor? You'll need just the basics: - floor tile (make sure you have enough tile to finish the job) - adhesive

More information

MAKE-IT-NOW (September 2014 Version)

MAKE-IT-NOW (September 2014 Version) 2 nd Floor, 56 Harvester Ave., Batavia, NY 14020 585-230-7626 or 585-300-7606 info@oatkaglass.com www.oatkaglass.com MAKE-IT-NOW (September 2014 Version) Walk into the studio anytime and create your own,

More information

Costco Bakery Employee Training Manual

Costco Bakery Employee Training Manual Costco Bakery Employee Training Manual Prepared for Costco Wholesale #684 Prepared by Ondria Arias May 3, 2013 Table of Contents iii Table of Contents Introduction... v Chapter 1: Operating the Equipment...

More information

Suggested Activities Processes that Shape the Earth: Earth s Structure and Plate Tectonics

Suggested Activities Processes that Shape the Earth: Earth s Structure and Plate Tectonics Suggested Activities Processes that Shape the Earth: Earth s Structure and Plate Tectonics From Harcourt Science Teacher Ed. Source (Grade Level) Title Pages Concept Harcourt Science (4) The Layers of

More information

Permanent Magnetic Generator Construction Manual

Permanent Magnetic Generator Construction Manual Permanent Magnetic Generator Construction Manual http://hojomotor.com Our Team Doing an On-site Assembly in Peru http://hojomotor.com Section 1) Introduction This manual describes how to build a 'permanent

More information

CREATING A MUSICAL SCALE WITH GLASS BOTTLES

CREATING A MUSICAL SCALE WITH GLASS BOTTLES CREATING A MUSICAL SCALE WITH GLASS BOTTLES Introduction You hear sounds when vibrations called sound waves hit your eardrum and your brain decodes them. Musical instruments produce a variety of sounds.

More information

ANT PREFERENCES. Introduction. Time Needed. What You Need

ANT PREFERENCES. Introduction. Time Needed. What You Need ANT PREFERENCES Introduction Ants, shown in Figure 1, are described as social insects because they live in colonies. In most species, all members of a colony of ants are descendants of the ant queen. Within

More information

Gear PEPSI CAN STOVE INSTRUCTIONS

Gear PEPSI CAN STOVE INSTRUCTIONS Gear PEPSI CAN STOVE INSTRUCTIONS [NOTE: Updated Instructions are now available. The new stove is less likely to develop flame leaks and the fuel/air mixture is improved. Instructions for a simmer ring

More information

Circuit Board Fabrication Project

Circuit Board Fabrication Project Circuit Board Fabrication Project TEL 240 - Electronics Technology Name: What you will be able to do: Etch a printed circuit board from prepared artwork. Prepare the circuit board for component population

More information

Unit 1 Lab Safety, Measurement, Density, Buoyancy and Controlled Experiment

Unit 1 Lab Safety, Measurement, Density, Buoyancy and Controlled Experiment Unit 1 Lab Safety, Measurement, Density, Buoyancy and Controlled Experiment NYS Standards: MST Standard #1 MST Standard #4 3.1h Density can be described as the amount of matter that is in a given amount

More information

MACHINE SHOP RULES AND REGULATIONS

MACHINE SHOP RULES AND REGULATIONS General MACHINE SHOP RULES AND REGULATIONS The College of Engineering Machine Shop was established for support of student course work and research. Every effort will be made to make the shop available

More information

PLEASE READ THE INSTRUCTION CAREFULLY UP TO THE END!

PLEASE READ THE INSTRUCTION CAREFULLY UP TO THE END! The instruction for installation of auto sound deadener noico for cars The installation of noico is not as hard as you think and you can do it on your own. However, in order to do everything right, please

More information

Using a Pendulum to Measure Gravity s Acceleration Elizabeth B. Chesick

Using a Pendulum to Measure Gravity s Acceleration Elizabeth B. Chesick SCIENCE EXPERIMENTS ON FILE Revised Edition 6.33-1 Using a Pendulum to Measure Gravity s Acceleration Elizabeth B. Chesick Topic Motion of a pendulum; gravity Time 1 2 hour! Safety Please click on the

More information

Tools and Tips: ( 1 )

Tools and Tips: ( 1 ) Tools and Tips: As you build the book will show in my many picture manual how to assemble. You can use your own methods as you desire, but these worked best for me. A smooth, flat work surface is very

More information

Circuits and Electricity

Circuits and Electricity Have you ever thought about how much we depend on electricity? Electricity is a form of energy that runs computers, appliances, and radios. Electricity lights our homes, schools, and office buildings.

More information

Equilox. 2009, Equilox International, Inc. All rights reserved.

Equilox. 2009, Equilox International, Inc. All rights reserved. Equilox Table of Contents I. WHAT IS THE EQUILOX ADHESIVE HOOF REPAIR SYSTEM AND HOW DOES IT WORK?... II. EQUILOX ADHESIVE DIRECTIONS FOR USE... III. GLUE-ON ALUMINUM SHOES... IV. QUARTER CRACK REPAIR...

More information

Draft Unit 6: Electricity and Magnetism Key Ideas:

Draft Unit 6: Electricity and Magnetism Key Ideas: Unit 6: Electricity and Magnetism Key Ideas: 6.1 Observe, describe, and investigate the evidence of energy transfer in electrical circuits. 6.2 Construct and diagram an electrical circuit 6.3 Identify

More information

Sea Star Surface Craft Construction Manual DRAFT

Sea Star Surface Craft Construction Manual DRAFT Sea Star Surface Craft Construction Manual DRAFT UNIT 1 DESIGNING AND MANUFACTURING THE HULL FOR THIS UNIT YOU WILL NEED: Tools Pencil & Eraser Ruler Scissors Felt-tip marker Hot Wire Foam Cutters (Sculpting

More information

Tutorial: Home etching of circuit boards with Toner Transfer.

Tutorial: Home etching of circuit boards with Toner Transfer. Tutorial: Home etching of circuit boards with Toner Transfer. by Bram Knaapen b.knaapen@student.tue.nl www.bramknaapen.com WARNING: In the etching process acid is used. USING THIS TUTORIAL AND THE GUIDELINES

More information

PENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA

PENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA PENNY IN A CUP: DEMONSTRATING THE LAW OF INERTIA Introduction Newton s (Sir Isaac Newton, English physicist, 1642 1727) First Law of Motion states that: An object at rest tends to stay at rest, and an

More information

3D EFFECTS FLOWERS TUTORIAL

3D EFFECTS FLOWERS TUTORIAL 3D EFFECTS FLOWERS TUTORIAL Project Materials List: Nylon sparkle organza or Nylon Iridescent Organza Water soluble backing (dissolve-away / washaway) Cut Away backing For best results we recommend that

More information

KidWind Solar Thermal Kit

KidWind Solar Thermal Kit KidWind Solar Thermal Kit Parts Included: 25 ft. Clear Tubing Black Plastic Box Plexiglas lid for plastic box 2 Containers 2V/400MA Solar Panel Electric Water Pump 2 Thermometers 2 Sets of Test Leads,

More information

Geotropism in Germinating Bean Seeds

Geotropism in Germinating Bean Seeds 4.26-1 SCIENCE EXPERIMENTS ON FILE Revised Edition Geotropism in Germinating Bean Seeds Dorothea Allen Topic Geotropic response in plants Time 1 2 hour preparation; 4 to 5 days to completion! Safety Please

More information

polymer clay. by Jill Erickson

polymer clay. by Jill Erickson intermediate polymer clay You ought to be in pictures... Transfer your favorite photographs to jewelry using polymer clay. by Jill Erickson This direct image-transfer technique is easy to master and does

More information

Arc Welder. Given a functional welder, instruction and demonstration of use, each student will be able to:

Arc Welder. Given a functional welder, instruction and demonstration of use, each student will be able to: Arc Welder I. Competencies Given a functional welder, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the arc welder. B. Pass a written test of safety

More information

Soldering. Resources and methods for learning about these subjects (list a few here, in preparation for your research):

Soldering. Resources and methods for learning about these subjects (list a few here, in preparation for your research): Soldering This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,

More information

For this project you will need: Tylose Gum Glue

For this project you will need: Tylose Gum Glue For this project you will need: 3/4# 50-50 fondant/gumpaste mix for bow (color of your choice) 3/4# 50-50 fondant/gumpaste mix for lid (color of your choice) 1 1/2# fondant 2 sheets of edible images (should

More information

Cutting Clay with Your Klic-N-Kut

Cutting Clay with Your Klic-N-Kut Cutting Clay with Your Klic-N-Kut by Judy Keating January 31, 2010 There are many types of items that can be made from polymer clay that has been cut with the Klic-N-Kut cutter. Those include buttons,

More information

MAPPING THE WEATHER. Introduction. Time Needed. What You Need. Safety Precautions

MAPPING THE WEATHER. Introduction. Time Needed. What You Need. Safety Precautions MAPPING THE WEATHER Introduction Weather maps are used by meteorologists to view different elements of the weather over a large area of the Earth s surface. A weather map can be made by plotting on a geographical

More information

Cloud Chamber Experiment

Cloud Chamber Experiment Cloud Chamber Experiment Teachers Guide Page 1 of 8 Purpose: The Cloud Chamber experiment illustrates that though radiation cannot be detected with the senses, it is possible to observe the result of radioactive

More information

ATD Angle Grinder Instruction Manual

ATD Angle Grinder Instruction Manual ATD-10503 Angle Grinder Instruction Manual Technical Data Model: ATD10503 Rated voltage frequency: AC120V 60Hz Input power: 750W No-load speed: 11,000 RPM Wheel: 4.5 Arbor size: 5/8-11 UNC Approximate

More information

Percentage of Water in Popcorn

Percentage of Water in Popcorn Skills Practice DATASHEET FOR IN-TEXT LAB Percentage of Water in Popcorn Popcorn pops because of the natural moisture inside each kernel. When the internal water is heated above 100 C, the liquid water

More information

The Sandpit - How to hang stuff

The Sandpit - How to hang stuff The Sandpit - How to hang stuff The Sandpit has the potential to display a wide range of content, some of the options for hanging or mounting that content are outlined below. Using light boxes Light boxes

More information

Make Your Own Hot and Cold Packs

Make Your Own Hot and Cold Packs 5.41-1 SCIENCE EXPERIMENTS ON FILE Revised Edition Make Your Own Hot and Cold Packs Lois Fruen Topic Endothermic and exothermic reactions Time 1 hour! Safety Please click on the safety icon to view the

More information

SCIENCE EXPERIMENTS ON FILE Revised Edition. Ice Cream Lab. Linda Preston

SCIENCE EXPERIMENTS ON FILE Revised Edition. Ice Cream Lab. Linda Preston 5.46-1 SCIENCE EXPERIMENTS ON FILE Revised Edition Ice Cream Lab Linda Preston Topic Lowering the freezing point Time 2 1 2 hours (includes time required to chill the ice cream mixture before doing the

More information

Soldering. Resources and methods for learning about these subjects (list a few here, in preparation for your research):

Soldering. Resources and methods for learning about these subjects (list a few here, in preparation for your research): Soldering This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,

More information

Popcorn Density Jane B. Nelson

Popcorn Density Jane B. Nelson 5.15-1 SCIENCE EXPERIMENTS ON FILE Revised Edition Popcorn Density Jane B. Nelson Topic Density Time 1 hour! Safety Please click on the safety icon to view the safety precautions. Adult supervision is

More information

Wings and Arms Paul Kuecks

Wings and Arms Paul Kuecks SCIENCE EXPERIMENTS ON FILE Revised Edition 4.8-1 Wings and Arms Paul Kuecks Topic Anatomy: skeletal muscles Time 2 hours Safety! Please click on the safety icon to view the safety precautions. Adult supervision

More information

Tech Shop Safety Level 2 - FN000425. Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258)

Tech Shop Safety Level 2 - FN000425. Tech Shop / Tool Safety Operations. (Fermilab machines not covered in course FN000258) Tech Shop Safety Level 2 - FN000425 Tech Shop / Tool Safety Operations (Fermilab machines not covered in course FN000258) Table of Contents Tech Shop / Tool Safety Operations 3 General Rules of Safety

More information

ACRYLITE extruded sheet (FF)

ACRYLITE extruded sheet (FF) Technical information ACRYLITE extruded sheet (FF) #3 Other Methods of Cutting This brief gives advice for: Equipment Procedures Trouble Shooting Equipment ACRYLITE extruded sheet is most commonly cut

More information

Bones Tell Your Height

Bones Tell Your Height Bones Tell Your Height Topic Calculation of height using long bones of arm or leg Introduction Scientists have long known that various measurements of the human body are in proportion to each other. For

More information

WARNING This is not a toy. Only for use by children 10 years EXPERIMENT MANUAL

WARNING This is not a toy. Only for use by children 10 years EXPERIMENT MANUAL EXPERIMENT MANUAL WARNING This is not a toy. Only for use by children 10 years of age or older with continuous adult supervision and assistance. Components in this kit may be sharp, breakable, or have

More information

Westerville Central High School Theatre Scene Shop Safety Rules and Equipment Guidelines

Westerville Central High School Theatre Scene Shop Safety Rules and Equipment Guidelines Westerville Central High School Theatre Scene Shop Safety Rules and Equipment Guidelines Warning: Knowledge and understanding of rules and procedures are your responsibility. Scene Shop supervisor holds

More information

Most commonly Liquid Tub Liners are used for restoration of bathtubs.

Most commonly Liquid Tub Liners are used for restoration of bathtubs. Most commonly Liquid Tub Liners are used for restoration of bathtubs. Due to that, the provided below detailed instruction is for restoration of the bath tubs. Quite the same way can be used for restoration

More information

North Carolina FFA Association Agricultural Mechanics Career Development Event

North Carolina FFA Association Agricultural Mechanics Career Development Event North Carolina FFA Association Three (3) of the following Agricultural Mechanics Performance Skills will be selected for the state competition. North Carolina FFA Association Agricultural Mechanics Performance

More information

Chop Saws and Grinders

Chop Saws and Grinders Chop Saws and Grinders 1. CHOP SAW 1.0 Function of the Chop Saw Chop saws are used to create a rough, initial abrasive cut in a desired material. In principle, a chop saw is an electrically powered motor

More information

No cracking Easy to cut and install Suitable for painting or tiling Dimensionally stable Withstands temperatures of up to 100 O C

No cracking Easy to cut and install Suitable for painting or tiling Dimensionally stable Withstands temperatures of up to 100 O C Why use Cement Backerboard for multi-fuel or log burning stove installation? HardieBacker cement backerboard can now be used as both a register plate and a decorative non-combustible lining sheet for multi-fuel

More information

CAPTURING NATURE IN FIBER AND THREAD Melody Randol www.melodyquilts.com randolm@earthlink.net

CAPTURING NATURE IN FIBER AND THREAD Melody Randol www.melodyquilts.com randolm@earthlink.net CAPTURING NATURE IN FIBER AND THREAD Melody Randol www.melodyquilts.com randolm@earthlink.net August 18, 19, 20 AQuA Fiber Arts Studio Thank you all for joining me in Capturing Nature in Fiber and Thread.

More information

Sugar or Salt? Ionic and Covalent Bonds

Sugar or Salt? Ionic and Covalent Bonds Lab 11 Sugar or Salt? Ionic and Covalent Bonds TN Standard 2.1: The student will investigate chemical bonding. Have you ever accidentally used salt instead of sugar? D rinking tea that has been sweetened

More information

Girls in Engineering GRADE 7. MIDDLE SCHOOL Newton, MA

Girls in Engineering GRADE 7. MIDDLE SCHOOL Newton, MA Girls in Engineering MOTORIZED MAG - LEV GRADE 7 BIGELOW ENGINEERING Technology MIDDLE SCHOOL Newton, MA 05-14-03 PROBLEM GUIDELINES As we move toward the twenty first century, an analysis of our transportation

More information

Accessorize Your Home with Pendant Lamps

Accessorize Your Home with Pendant Lamps Accessorize Your Home with Pendant Lamps Shine a light on your creativity with custom lighting. Pendant lights are a stylish way to update your home and show off fused and stained glass art. Draped Pendant

More information