Data Sheet. HSMD-Cxxx, HSMG-Cxxx, HSMH-Cxxx, HSMS-Cxxx, HSMY-Cxxx, Surface Mount Chip LEDs

Transcription

1 HSMD-Cxxx, HSMG-Cxxx, HSMH-Cxxx, HSMS-Cxxx, HSMY-Cxxx, Surface Mount Chip LEDs Data Sheet HSMx-C11/ HSMx-C12/HSMx-C15/HSMx-C17/HSMx-C177/ HSMx-C19/HSMx-C191/HSMx-C197/HSMx-C265 Description These chip LEDs are designed in an industry standard package for ease of handling and use. Various different LED colors are available in nine compact, single color packages. The HSMx-C15 has the industry standard 3.2 x 1.6 mm footprint that is excellent for all around use. The HSMx-C17 has the widely used 2. x 1.25 mm foot-print with.8 mm profile. The HSMx-C177 has the widely used 2. x 1.25 mm footprint with.4 mm profile. The HSMx-C19x series has the industry standard 1.6 x.8 mm footprint with varying profile to suit designers needs, the HSMx-C19 has.8 mm profile, the HSMx-C191 has a low profile of.6 mm, and the HSMx-C197 has the ultra low profile of.4 mm. This family with its thin profile and wide viewing angle makes this LED exceptional for backlighting applications. The HSMx-C11 is a right angle package with the universally accepted dimensions of 3.2 x 1. x 1.5 mm. The HSMx-C12 is a smaller right angle package with industry standard 1.6 x.6 x 1. mm. HSMx-C265 is a reverse mount package with dimensions of 3.4 x 1.25 x 1.1 mm. These devices are ideal for LCD backlighting and sidelighting applications. In order to facilitate pick and place operation, these chip LEDs are shipped in tape and reel with 4 units per reel for HSMx-C12, C17, C177, C19, C191, C197 packages, and 3 units per reel for HSMx-C11, C15, C265 packages. All packages are compatible with IR reflow solder processes. The small size and wide viewing angle make these LEDs prime choices for backlighting applications and front panel illumination especially where space is a premium. Features Small size Industry standard footprint Compatible with IR solder Diffused optics Operating temperature range of -4 C to +85 C Right angle & reverse mount package available Various colors available Available in 8 mm tape on 7 in. (178 mm) diameter reels Applications Keypad backlighting Push-button backlighting LCD backlighting Symbol backlighting Front panel indicator

2 Device Selectiion Guide GaP Green HER Orange Yellow Description HSMG-C11 HSMS-C11 HSMD-C11 HSMY-C11 Untinted, Non-Diffused HSMG-C12 HSMS-C12 HSMD-C12 Untinted, Non-Diffused HSMG-C15 HSMS-C15 HSMD-C15 HSMY-C15 Untinted, Diffused HSMG-C17 HSMS-C17 HSMD-C17 HSMY-C17 Untinted, Diffused HSMG-C177 HSMS-C177 HSMD-C177 HSMY-C177 Untinted, Diffused HSMG-C19 HSMS-C19 HSMD-C19 HSMY-C19 Untinted, Diffused HSMG-C191 HSMS-C191 HSMD-C191 HSMY-C191 Untinted, Diffused HSMG-C197 HSMS-C197 HSMD-C197 HSMY-C197 Untinted, Diffused HSMG-C265 Untinted, Non-Diffused As AlGaAs Red HSMH-C11 HSMH-C12 HSMH-C15 HSMH-C17 HSMH-C19 HSMH-C191 HSMH-C265 Description Untinted, Non-Diffused Untinted, Non-Diffused Untinted, Diffused Untinted, Diffused Untinted, Diffused Untinted, Diffused Untinted, Non-Diffused Package Dimensions CATHODE MARK (ANODE MARK FOR HSMH-C15) CATHODE MARK (ANODE MARK FOR HSMH-C17) 1.6 (.63) 1.25 (.49) 3.2 (.126 ) 2. (.79 ) DIFFUSED EPOXY 2. (.79) POLARITY [3] DIFFUSED EPOXY 1.4 (.55) POLARITY [3].6 (.24) FOR HSMH-C15).5 ±.2 (.2 ±.8).5 (.2) 1.1 (.43).5 ±.2 (.2 ±.8).3 (.12) FOR HSMH-C17).4 ±.15 (.16 ±.6).8 (.31).3 (.12).4 ±.15 (.16 ±.6) HSMx-C15 Notes: 1. All dimensions in millimeters (inches). 2. Tolerance is ±.1 mm (±.4 in.) unless otherwise specified. 3. Polarity for HSMH-Cxxx will be the opposite of what is shown on above drawings. HSMx-C17 2

3 CATHODE MARK (ANODE MARK FOR HSMH-C19) LED DIE CATHODE LINE (ANODE MARK FOR HSMH-C11).8 (.31) 1. (.39) 1.6 (.63 ) 2.6 (.12 ) 3.2 (.126 ) POLARITY [3] 1. (.39) POLARITY [3] CLEAR EPOXY.3 (.12) 1.5 (.59) DIFFUSED EPOXY FOR HSMH-C19).3 ±.15 (.12 ±.6).8 (.31).3 (.12).3 ±.15 (.12 ±.6).8 (.31) 3.2 (.126 ) 1.6 (.63 ).5 (.2) FOR HSMH-C11) 1. (.39).7 (.28) MIN. HSMx-C19 HSMx-C11 CATHODE MARK (ANODE MARK FOR HSMH-C191) CATHODE MARK.8 (.31) 1.25 (.49) 1.6 (.63 ) 2. (.79).3 (.12) 1. (.39) POLARITY [3] DIFFUSED EPOXY.4 (.16) POLARITY DIFFUSED EPOXY FOR HSMH-C191).3 ±.15 (.12 ±.6).6 (.23).3 (.12).3 ±.15 (.12 ±.6).4 ±.15 (.16 ±.6).16 (.6).4 ±.15 (.16 ±.6).7 (.28) MIN. 1.1 (.43) MIN. HSMx-C191 HSMx-C177 Notes: 1. All dimensions in millimeters (inches). 2. Tolerance is ±.1 mm (±.4 in.) unless otherwise specified. 3. Polarity for HSMH-Cxxx will be the opposite of what is shown on above drawings. 3

4 LED DIE 3.4 (.134) CATHODE MARK (ETCHED) [ANODE MARK FOR HSMH-C265] CATHODE MARK 1.25 (.49).8 (.31) GREEN SOLDER MASK POLARITY [3] 1.6 (.63) UNDIFFUSED EPOXY 1.2 (.47) DIFFUSED EPOXY POLARITY 1.1 (.43) 1.1 (.43).4 (.16) FOR HSMH-C265).3 (.12).16 (.6).5 ±.15 (.2 ±.6).5 ±.15 (.2 ±.6).3 ±.15 (.12 ±.6).7 (.28) MIN. HSMx-C265 HSMx-C197 LED DIE CATHODE MARK (ANODE MARK FOR HSMH-C12).3 (.12) 1.6 (.63).6 (.24) CLEAR EPOXY 1.2 (.47) POLARITY[3] 1. (.39).5 (.2) FOR HSMH-C12) 3.3 (.12) HSMx-C12 Notes: 1. All dimensions in millimeters (inches). 2. Tolerance is ±.1 mm (±.4 in.) unless otherwise specified. 3. Polarity for HSMH-Cxxx will be the opposite of what is shown on above drawings. 4

5 Absolute Maximum Ratings for GaP at T A =25 C Parameter C11/15/265 C12/17/177/19/191/197 Units DC Forward Current [1] 25 2 ma Power Dissipation mw Reverse Voltage (I R =1 μa) 5 5 V LED Junction Temperature C Operating Temperature Range -4 to to +85 C Storage Temperature Range -4 to to +85 C Soldering Temperature See reflow soldering profile (Figure 9 & 1) Absolute Maximum Ratings for AlGaAs at T A =25 C Parameter C11/15 C12/17/19/191/265 Units DC Forward Current [1] 3 25 ma Power Dissipation mw Reverse Voltage (I R =1μA) 5 5 V LED Junction Temperature C Operating Temperature Range -4 to to +85 C Storage Temperature Range -4 to to +85 C Soldering Temperature See reflow soldering profile (Figure 9 & 1) Note: 1. Derate linearly as shown in Figure 4 for temperature above 25 C. Electrical Characteristics at T A =25 C Reverse Capacitance Forward Voltage Breakdown C(pF), Thermal Part Number Color V F (Volts) V R V F = V, I F = 2 I R = 1 μa f = 1 MHz R J-P ( C/W) Typ. Max. Min. Typ. Typ. HSMS-C11/15 HER HSMS-C12 35 HSMS-C17/177/19/191/ HSMD-C11/15 Orange HSMD-C12 35 HSMD-C17/177/19/191/ HSMY-C11/15 Yellow HSMY-C17/177/19/191/ HSMG-C11/15 Green HSMG-C12 35 HSMG-C17/177/19191/197/ HSMH-C11/15 AlGaAs HSMH-C12 4 HSMH-C17/19/191/

6 Optical Characteristics at T A =25 C Luminous Peak Dominant Intensity [1] Wavelength Wavelength Viewing Part Number Color Iv(mcd)@2mA peak (nm) d (nm) Angle 2 1/2 ( ) [2] Min. Typ. Typ. Typ. Typ. HSMG-C11/177/197 Green HSMG-C HSMG-C15/17/19/191/ HSMS-C11/177/197 HER HSMS-C HSMS-C15/17/19/ HSMD-C11/177/197 Orange HSMD-C HSMD-C15/17/19/ HSMY-C11/177/197 Yellow HSMY-C15/17/19/ HSMH-C11 AlGaAs HSMH-C HSMH-C15/17/19/191/ Notes: 1. The luminous intensity, Iv, is measured at the peak of the spatial radiation pattern, which may not be aligned with the mechanical axis of the lamp package. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Color Bin Limits [1] Green Color Bins [1] Dom. Wavelength (nm) Bin ID Min. Max. A B C D E Tolerance: ±1 nm Yellow Color Bins [1] Dom. Wavelength (nm) Bin ID Min. Max. A B C D E F Tolerance: ±1 nm Orange Color Bins [1] Dom. Wavelength (nm) Bin ID Min. Max. A B C D E F Tolerance: ±1 nm 6

7 Light Intensity (Iv) Bin Limits [1] Intensity (mcd) Intensity (mcd) Bin ID Min. Max. Bin ID Min. Max. A N B P C Q D R E S F T G U H V J W K X L Y M Tolerance: ±15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Avago representative for information on currently available bins. 2. The Iv binning specification set-up is for lowest allowable Iv binning only. There is no upper Iv bin limits. 1. GREEN AlGaAs RELATIVE INTENSITY.5 YELLOW ORANGE HER Figure 1. Relative intensity vs. wavelength. WAVELENGTH nm I F FORWARD CURRENT ma 1 HER AlGaAs GREEN 1 1 YELLOW ORANGE V F FORWARD VOLTAGE V LUMINOUS INTENSITY (NORMALIZED AT 2 ma) AlGaAs GaP I F FORWARD CURRENT ma I F MAX. MAXIMUM FORWARD CURRENT ma 35 C11/C15 AlGaAs C12/C17/ C177/C19/ C191/C197 HER, ORANGE, YELLOW, GREEN C11/C15/C265 HER, ORANGE, YELLOW, GREEN C12/C17/C177/ C19/C191/C197/ C265 AlGaAs Rq J-A = 8 C/W Rq J-A = 6 C/W T A AMBIENT TEMPERATURE C Figure 2. Forward current vs. forward voltage. Figure 3. Luminous intensity vs. forward current. Figure 4. Maximum forward current vs. ambient temperature. 7

8 RELATIVE INTENSITY % RELATIVE INTENSITY % ANGLE ANGLE Figure 5. Relative intensity vs. angle for HSMx-C11. RELATIVE INTENSITY ANGLE RELATIVE INTENSITY ANGLE Figure 6. Relative intensity vs. angle for HSMx-C12. 8

9 RELATIVE INTENSITY % ANGLE Figure 7. Relative intensity vs. angle for HSMx-C177 and C197. RELATIVE INTENSITY % ANGLE Figure 8. Relative intensity vs. angle for HSMx-C15, C17, C19, C191 and C SEC. MAX. TEMPERATURE C 1 SEC. MAX. 23 C MAX. 4 C/SEC. MAX. 4 C/SEC. MAX. 3 C/SEC. MAX. TEMPERATURE 217 C 2 C 15 C C 3 C/SEC. MAX. 3 C/SEC. MAX SEC. 6 C/SEC. MAX. 6 SEC. MAX. OVER 2 MIN. TIME TIME Figure 9. Recommended reflow soldering profile. Figure 1. Recommended Pb-free reflow soldering profile. 1.5 (.59) 1.2 (.47).8 (.31) 1.5 (.59) 2. (.79) 1.5 (.59) Figure 11. Recommended soldering pattern for HSMx-C (.47).9 (.35) 1.2 (.47) Figure 12. Recommended soldering pattern for HSMx-C17 and C (.31).7 (.28).8 (.31) Figure 13. Recommended soldering pattern for HSMx-C19, C191 and C197. 9

10 5. (.2).9 (.35).9 (.35).4 (.16).4 (.16).2 (.8) 1.5 (.59) 2. (.79) 1.5 (.59) Figure 14. Recommended soldering pattern for HSMx-C (.39) CENTERING BOARD.15 (.6).8 (.31) 1.2 (.47).8 (.31) Figure 15. Recommended soldering pattern for HSMx-C12..7 (.28) CENTERING BOARD USER FEED DIRECTION 2.2 (.87) DIA. PCB HOLE CATHODE SIDE 1.25 (.49) 1.4 (.55) 2.3 (.91) 1.4 (.55) PRINTED LABEL Figure 16. Recommended soldering pattern for HSMx-C265. Figure 17. Reeling orientation. 8. ± 1. (.315 ±.39) Ø 13.1 ±.5 (Ø.516 ±.2) 1.5 ± 1. (.413 ±.39) 3. ±.5 (.118 ±.2) Ø 2.2 MIN. (Ø.795 MIN.) ± 1. (7.24 ±.39) 59.6 ± 1. (2.346 ±.39) 4. ±.5 (.157 ±.2) 6 PS 5. ±.5 (.197 ±.2) Figure 18. Reel dimensions. Note: All dimensions in millimeters (inches). 1

11 4. (.157) 1.5 (.59) CATHODE DIM. C.2 ±.5 (.8 ±.2) 1.75 (.69) DIM. A 3.5 ±.5 (.138 ±.2) 8. ±.3 (.315 ±.12) DIM. B 2. ±.5 (.79 ±.2) HSMx-C11/C12 POSITION IN CARRIER TAPE DIM. A DIM. B 4. (.157) R 1. ±.5 (.39 ±.2) R.5 ±.5 (.2 ±.2) PART NUMBER HSMx-C11 SERIES HSMx-C12 SERIES HSMx-C15 SERIES HSMx-C17 SERIES HSMx-C177 SERIES HSMx-C19 SERIES HSMx-C191 SERIES HSMx-C197 SERIES USER FEED DIRECTION TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) DIM. A ±.1 (.4) 3.4 (.134) 1.9 (.75) 3.5 (.138) 2.3 (.91) 2.3 (.91) 1.75 (.69) 1.86 (.73) 1.75 (.69) DIM. B ±.1 (.4) 1.7 (.67) 1.15 (.45) 1.88 (.74) 1.45 (.57) 1.4 (.55).9 (.35).89 (.35).95 (.37) COVER TAPE DIM. C ±.1 (.4) 1.2 (.47).75 (.3) 1.27 (.5).95 (.37).6 (.24).9 (.35).87 (.34).6 (.24) CARRIER TAPE 4. (.157) 1.5 (.59) CATHODE DIM. C.2 ±.5 (.8 ±.2) 1.75 (.69) DIM. A 3.5 ±.5 (.138 ±.2) 8. ±.3 (.315 ±.12) DIM. B 2. ±.5 (.79 ±.2) 4. (.157) PART NUMBER USER FEED DIRECTION TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) DIM. A ±.1 (.4) DIM. B ±.1 (.4) COVER TAPE DIM. C ±.1 (.4) HSMx-C265 SERIES 3.7 (.146) 1.45 (.57) 1.3 (.51) CARRIER TAPE Figure 19. Tape dimensions. 11

12 END START Storage Condition: 5 to 3 6% RH max. Baking is required under the condition: a) Humidity Indicator Card is >1% when read at 23 ± 5 C. b) Device exposed to factory conditions <3 C/6% RH more than 672 hours. Baking recommended condition: 6 +/ 5 C for 2 hours. THERE SHALL BE A MINIMUM OF 16 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 16 mm (6.3 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. MINIMUM OF 23 mm (9.5 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE. Figure 2. Tape leader and trailer dimensions. Notes: 1. All dimensions in millimeters (inches). 2. Tolerance is ±.1 mm (±.4 in.)unless otherwise specified. Convective IR Reflow Soldering For more information on IR reflow soldering, refer to Application Note 16, Surface Mounting SMT LED Indicator Components. For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright Avago Technologies. All rights reserved. Obsoletes EN AV2-551EN - March 5, 212