BTA A Snubberless Triacs. Features. Description. I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma
|
|
- Robert Glenn
- 7 years ago
- Views:
Transcription
1 20 A Snubberless Triacs Datasheet production data Features I T(RMS) = 20 A V DRM, V RRM = 600 and 700 V I GT (Q1) (max) = 35 and 50 ma Description G A2 A1 The BTA20 Triacs use high performance glass passivated chip technology. The Snubberless concept offers suppression of the RC network and is suitable for applications such as phase control and static switching on inductive or resistive load. Thanks to their clip assembly technique, the BTA20 Triacs provide a superior performance in surge current handling capabilities. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 2500 V rms) complying with UL standards (File ref.: E81734). A1 A2 G TO-220AB Insulated TM: Snubberless is a trademark of STMicroelectronics. July 2012 Doc ID 2932 Rev 3 1/8 This is information on a product in full production. 8
2 Characteristics BTA20 1 Characteristics Table 1. Absolute maximum ratings Symbol Parameter Value Unit I T(RMS) On-state rms current (full sine wave) T c = 70 C 20 A I TSM Non repetitive surge peak on-state current (full cycle, T j initial = 25 C) F = 50 Hz t = 10 ms 210 F = 60 Hz t = 8.3 ms 200 I ² t I ² t Value for fusing t p = 10 ms 200 A ² s di/dt Critical rate of rise of on-state current I G = 2 x I GT, t r 100 ns Repetitive F = 50 Hz T j = 125 C 50 Non repetitive 100 V DSM, V RSM Non repetitive peak off-state voltage t p = 10 ms T j = 25 C V DSM /V RSM I GM Peak gate current t p = 20 µs T j = 125 C 4 A V GM Peak positive gate voltage t p = 20 µs 16 V P G(AV) Average gate power dissipation T j = 125 C 1 W T stg Storage junction temperature range - 40 to T j Operating junction temperature range - 40 to A A/µs V C Table 2. Electrical characteristics (T j = 25 C, unless otherwise specified) BTA20 Symbol Test conditions Quadrant BW CW Unit I (1) GT Min. 2 1 ALL V D = 12 V, R L = 33 Max ma V GT ALL Max. 1.5 V V GD V D = V DRM, R L = 3.3 k T j = 125 C ALL Min. 0.2 V I (2) H I T = 500 ma, gate open Max ma I - III 50 - Typ. I L I G = 1.2 I GT II 90 - ma I - II - III Max dv/dt (2) V D = 67% V DRM, gate open T j = 125 C Typ Min V/µs (dv/dt)c (2) (di/dt)c = 20 A/ms T j = 125 C Typ Min V/µs 1. Minimum I GT is guaranteed at 5% of I GT max. 2. For both polarities of A2 referenced to A1. 2/8 Doc ID 2932 Rev 3
3 Characteristics Table 3. Static characteristics Symbol Parameter Value Unit V (1) TM I TM = 28 A, t p = 380 µs T j = 125 C Max V I DRM T j = 125 C 10 µa V DRM = V RRM Max. I RRM T j = 125 C 3 ma 1. For both polarities of A2 referenced to A1. Table 4. Thermal resistances Symbol Parameter Value Unit R th(j-c) Junction to case for AC 2.1 R th(j-c) Junction to case for DC 2.8 R th(j-a) Junction to ambient 60 C/W Figure 1. Maximum power dissipation versus on-state rms current (full cycle) Figure 2. Correlation between maximum rms power dissipation and maximum allowable temperatures P(W) 30 P(W) 30 T case( C) R th = 0 C/W α = R th = 0.5 C/W 85 α = α = α = α = 30 α 5 α I T(RMS) (A) R th = 1.5 C/W R th = 1 C/W 5 (Tamb and Tcase) for different thermal resistances heatsink + contact T amb( C) Figure 3. On-state rms current versus case temperature (full cycle) Figure 4. Relative variation of thermal impedance versus pulse duration I T(RMS) (A) 25 α = K=[Z th/rth] 20 Zth(j-c) Zth(j-a) T C( C) t p(s) E-3 1.E-2 1.E-1 1.E+0 1.E+1 1.E+2 5.E+2 Doc ID 2932 Rev 3 3/8
4 Characteristics BTA20 Figure 5. On-state characteristics (maximum values) Figure 6. Non repetitive surge peak on-state current versus number of cycles I TM(A) 1000 Tj max. V t0 = 1.04V R d = 20 mω I TSM(A) 1000 t=20ms 100 T= j Tj max. Non repetitive Tj initial=25 C One cycle 10 T j = 25 C. V TM(V) Number of cycles Figure 7. Non repetitive surge peak on-state current for a sinusoidal pulse and corresponding value of I 2 t Figure 8. Relative variation of gate trigger current and holding current versus junction temperature I TSM(A), I t (A s) pulse width t 10 ms Tj initial=25 C 2.5 I GT,I H,I L[T] j / I GT,I H,I L[T j=25 C] 2.0 ITSM 1.5 IGT 2 I t 1.0 IH & IL 100 t (ms) p T j( C) /8 Doc ID 2932 Rev 3
5 Ordering information scheme 2 Ordering information scheme Figure 9. Ordering information scheme BT A BW RG Triac series Insulation A = insulated Current 20 = 20A Voltage 600 = 600V 700 = 700V Sensitivity and type BW = 50mA (max.) CW = 35mA (max) Packing mode RG = Tube Table 5. Product selector Voltage Order code 600 V 700 V Sensitivity Type Package BTA20-600CWRG X 35 ma BTA20-700BWRG X 50 ma BTA20-700CWRG X 35 ma Snubberless TO-220AB Ins. Doc ID 2932 Rev 3 5/8
6 Package information BTA20 3 Package information Epoxy meets UL94, V0 Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: ECOPACK is an ST trademark. Table 6. TO-220AB dimensions Ref. Millimeters Dimensions Inches Min. Typ. Max. Min. Typ. Max. A a B Ø I L b2 C F a B b A b I4 l3 l2 a1 a2 c2 C c c e e b1 M c1 F ØI I L l l M /8 Doc ID 2932 Rev 3
7 Ordering information 4 Ordering information Table 7. Ordering information Ordering type Marking Package Weight Base qty Delivery mode BTA20-600CWRG BTA20-700BWRG BTA20-700CWRG BTA20-600CW BTA20-700BW BTA20-700CW TO-220AB Ins. 2.3 g 50 Tube 5 Revision history Table 8. Document revision history Date Revision Changes Sep A Initial release. 08-Feb TO-220AB Ins. delivery mode changed from bulk to tube. 09-Jul Updated di/dt repetitive value in Table 1. Doc ID 2932 Rev 3 7/8
8 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 8/8 Doc ID 2932 Rev 3
BTA40, BTA41 and BTB41 Series
BTA4, BTA41 and BTB41 Series STANDARD 4A TRIACS Table 1: Main Features Symbol Value Unit I T(RMS) 4 A V DRM /V RRM 6 and 8 V I T (Q1 ) 5 ma DESCRIPTION Available in high power packages, the BTA/ BTB4-41
More informationBTA12, BTB12, T12xx. 12 A Snubberless, logic level and standard triacs. Features. Applications. Order code. Description
12 A Snubberless, logic level and standard triacs Features Medium current triac Low thermal resistance with clip bonding Low thermal resistance insulation ceramic for insulated BTA High commutation (4Q)
More informationBTB04-600SL STANDARD 4A TRIAC MAIN FEATURES
BTB-6SL STANDARD A TRIAC MAIN FEATURES A Symbol Value Unit I T(RMS) A V DRM /V RRM 6 V I GT(Q) ma G A A DESCRIPTION The BTB-6SL quadrants TRIAC is intended for general purpose applications where high surge
More informationAN2703 Application note
Application note list for SCRs, TRIACs, AC switches, and DIACS Introduction All datasheet parameters are rated as minimum or maximum values, corresponding to the product parameter distribution. In each
More informationDDSL01. Secondary protection for DSL lines. Features. Description
Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description
More informationBZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
More informationSTTH1R04-Y. Automotive ultrafast recovery diode. Features. Description
Automotive ultrafast recovery diode Features Datasheet - production data K SMA STTH1R4AY Table 1. Device summary Symbol Value I F(AV) 1 A V RRM 4 V T j (max) 175 C V F (typ) t rr (typ) A K.9 V 14 ns A
More informationETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards
ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved
More informationBTW67 and BTW69 Series
BTW67 and BTW69 Series STNDRD 50 SCRs MIN FETURES: Symbol Value Unit I T(RMS) 50 V DRM /V RRM 600 to 1200 V G K I GT 80 m G K DESCRIPTION vailable in high power packages, the BTW67 / BTW69 Series is suitable
More informationSTTH2R06. High efficiency ultrafast diode. Features. Description
STTH2R6 High efficiency ultrafast diode Features Very low conduction losses Negligible switching losses Low forward and reverse recovery times High junction temperature Description A K The STTH2R6 uses
More informationBTW69-1200N. 50 A 1200 V non insulated SCR thyristor. Description. Features. Applications
50 1200 V non insulated SCR thyristor Datasheet - production data G K K G TOP3 non insulated Description vailable in non insulated TOP3 high power package, the BTW69-1200N is suitable for applications
More informationESDLIN1524BJ. Transil, transient voltage surge suppressor diode for ESD protection. Features. Description SOD323
Transil, transient voltage surge suppressor diode for ESD protection Datasheet production data Features Max peak pulse power 160 W (8/0 µs) Asymmetrical bidirectional device Stand-off voltage: 15 and 4
More information2STBN15D100. Low voltage NPN power Darlington transistor. Features. Application. Description
Low voltage NPN power Darlington transistor Features Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter diode TAB Application Linear
More informationBD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor
Low voltage PNP power transistor Features Low saturation voltage PNP transistor Applications Audio, power linear and switching applications Description The device is manufactured in planar technology with
More informationBD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
More informationULN2801A, ULN2802A, ULN2803A, ULN2804A
ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral
More informationST13005. High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Datasheet production data Features Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed Applications
More informationDSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards
-xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More informationBD135 - BD136 BD139 - BD140
BD135 - BD136 BD139 - BD140 Complementary low voltage transistor Features Products are pre-selected in DC current gain Application General purpose Description These epitaxial planar transistors are mounted
More informationSTP60NF06FP. N-channel 60V - 0.014Ω - 30A TO-220FP STripFET II Power MOSFET. General features. Description. Internal schematic diagram.
N-channel 60V - 0.014Ω - 30A TO-220FP STripFET II Power MOSFET General features Type V DSS R DS(on) I D STP60NF06FP 60V
More informationSTP60NF06. N-channel 60V - 0.014Ω - 60A TO-220 STripFET II Power MOSFET. General features. Description. Internal schematic diagram.
N-channel 60V - 0.014Ω - 60A TO-220 STripFET II Power MOSFET General features Type V DSS R DS(on) I D STP60NF06 60V
More informationTable 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)
More informationLM337. Three-terminal adjustable negative voltage regulators. Features. Description
Three-terminal adjustable negative voltage regulators Datasheet - production data current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional
More informationSTN3NF06L. N-channel 60 V, 0.07 Ω, 4 A, SOT-223 STripFET II Power MOSFET. Features. Application. Description
N-channel 60 V, 0.07 Ω, 4 A, SOT-223 STripFET II Power MOSFET Features Type V DSS (@Tjmax) Exceptional dv/dt capability Avalanche rugged technology 100% avalanche tested R DS(on) max STN3NF06L 60 V < 0.1
More informationEN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. 2N3055, MJ2955 Complementary power transistors Features Datasheet - production
More informationULN2001, ULN2002 ULN2003, ULN2004
ULN2001, ULN2002 ULN2003, ULN2004 Seven Darlington array Datasheet production data Features Seven Darlingtons per package Output current 500 ma per driver (600 ma peak) Output voltage 50 V Integrated suppression
More informationLM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
More informationSTTH110. High voltage ultrafast rectifier. Description. Features
High voltage ultrafast rectifier Datasheet - production data K Description The STTH110, which is using ST ultrafast high voltage planar technology, is especially suited for free-wheeling, clamping, snubbering,
More informationLM135-LM235-LM335. Precision temperature sensors. Features. Description
Precision temperature sensors Features Directly calibrated in K 1 C initial accuracy Operates from 450µA to 5mA Less than 1Ω dynamic impedance TO-92 (Plastic package) Description The LM135, LM235, LM335
More informationMC33079. Low noise quad operational amplifier. Features. Description
Low noise quad operational amplifier Datasheet production data Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion: 0.002% Large output voltage
More informationTDA2004R. 10 + 10 W stereo amplifier for car radio. Features. Description
10 + 10 W stereo amplifier for car radio Features Low distortion Low noise Protection against: Output AC short circuit to ground Overrating chip temperature Load dump voltage surge Fortuitous open ground
More informationTN0023 Technical note
Technical note Discontinuous flyback transformer description and design parameters Introduction The following is a general description and basic design procedure for a discontinuous flyback transformer.
More informationUA741. General-purpose single operational amplifier. Features. Applications. Description. N DIP8 (plastic package)
General-purpose single operational amplifier Datasheet - production data N DIP8 (plastic package) D SO8 (plastic micropackage) Pin connections (top view) 1 - Offset null 1 2 - Inverting input 3 - Non-inverting
More informationDescription. Table 1. Device summary
2 A positive voltage regulator IC Description Datasheet - production data Features TO-220 Output current up to 2 A Output voltages of 5; 7.5; 9; 10; 12; 15; 18; 24 V Thermal protection Short circuit protection
More informationL6234. Three phase motor driver. Features. Description
Three phase motor driver Features Supply voltage from 7 to 52 V 5 A peak current R DSon 0.3 Ω typ. value at 25 C Cross conduction protection TTL compatible driver Operating frequency up to 150 khz Thermal
More informationTDA2003 10W CAR RADIO AUDIO AMPLIFIER
TDA2003 10W CAR RADIO AUDIO AMPLIFIER DESCRIPTION The TDA 2003 has improved performance with the same pin configuration as the TDA 2002. The additional features of TDA 2002, very low number of external
More informationDescription. Table 1. Device summary. Order code Temperature range Package Packaging Marking
14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully
More informationL78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
More informationSTP55NF06L STB55NF06L - STB55NF06L-1
General features STP55NF06L STB55NF06L - STB55NF06L-1 N-channel 60V - 0.014Ω - 55A TO-220/D 2 PAK/I 2 PAK STripFET II Power MOSFET Type V DSS R DS(on) I D STP55NF06L 60V
More informationOrder code Temperature range Package Packaging
ST485B ST485C Low power RS-485/RS-422 transceiver Features Low quiescent current: 300 µa Designed for RS-485 interface application - 7 V to 12 V common mode input voltage range Driver maintains high impedance
More informationSTTH3R02QRL. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes DO-15 STTH3R02Q DO-201AD STTH3R02
Ultrafast recovery diode Main product characteristics I F(V) 3 V RRM 2 V T j (max) V F (typ) 175 C.7 V K t rr (typ) 16 ns Features and benefits Very low conduction losses Negligible switching losses K
More informationDescription. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP
1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for
More informationDescription SO-8. series. Furthermore, in the 8-pin configuration Very low-dropout voltage (0.2 V typ.)
ery low-dropout voltage regulator with inhibit function TO-92 Bag TO-92 Tape and reel Ammopack 1 2 3 SO-8 Description Datasheet - production data The is a very low-dropout voltage regulator available in
More informationSTP10NK80ZFP STP10NK80Z - STW10NK80Z
STP10NK80ZFP STP10NK80Z - STW10NK80Z N-channel 800V - 0.78Ω - 9A - TO-220/FP-TO-247 Zener-protected supermesh TM MOSFET General features Type V DSS R DS(on) I D Pw STP10NK80Z 800V
More informationX02. 1.25 A sensitive gate SCR. Features. Applications. Description. on-state rms current: 1.25 A. repetitive peak off-state voltage: 600 V and 800 V
1.25 sensitive gate SCR Features on-state rms current: 1.25 repetitive peak off-state voltage: 600 V and 800 V G gate triggering current: 50 and 200 µ K pplications ground fault circuit interrupters overvoltage
More informationEVL185W-LEDTV. 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L. Features.
Features 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L Data brief Universal input mains range: 90 264 Vac - frequency 45 65 Hz Output voltage 1: 130
More informationSTPS5L60. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet - production data Description Power Schottky rectifier suited for switch mode power supplies and high frequency inverters. This device is intended for use in low voltage
More informationSTB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP
STB4NK60Z, STB4NK60Z-1, STD4NK60Z STD4NK60Z-1, STP4NK60Z,STP4NK60ZFP N-channel 600 V - 1.76 Ω - 4 A SuperMESH Power MOSFET DPAK - D 2 PAK - IPAK - I 2 PAK - TO-220 - TO-220FP Features Type V DSS R DS(on)
More informationSTB75NF75 STP75NF75 - STP75NF75FP
STB75NF75 STP75NF75 - STP75NF75FP N-channel 75V - 0.0095Ω - 80A - TO-220 - TO-220FP - D 2 PAK STripFET II Power MOSFET General features Type V DSS R DS(on) I D STB75NF75 75V
More informationACS108. Overvoltage protected AC switch (ACS ) Description. Features. Applications
Overvoltage protected AC switch (ACS ) Datasheet - production data OUT G TO-92-6SA -8SA COM COM OUT COMG -6SN -8SN Description The belongs to the AC switch range (built with A. S. D. technology). This
More informationSTGB10NB37LZ STGP10NB37LZ
STGB10NB37LZ STGP10NB37LZ 10 A - 410 V internally clamped IGBT Features Low threshold voltage Low on-voltage drop Low gate charge TAB TAB High current capability High voltage clamping feature Applications
More informationAN3353 Application note
Application note IEC 61000-4-2 standard testing Introduction This Application note is addressed to technical engineers and designers to explain how STMicroelectronics protection devices are tested according
More informationAN3332 Application note
Application note Generating PWM signals using STM8S-DISCOVERY Application overview This application user manual provides a short description of how to use the Timer 2 peripheral (TIM2) to generate three
More informationAN4108 Application note
Application note How to set up a HTTPS server for In-Home display with HTTPS Introduction This application note describes how to configure a simple SSL web server using the EasyPHP free application to
More informationPassivated, sensitive gate triacs in a SOT54 plastic package. General purpose switching and phase control
TO-92 Rev. 9 9 November 2 Product data sheet. Product profile. General description Passivated, sensitive gate triacs in a SOT54 plastic package.2 Features and benefits Designed to be interfaced directly
More informationSTB60N55F3, STD60N55F3, STF60N55F3 STI60N55F3, STP60N55F3, STU60N55F3
STB60N55F3, STD60N55F3, STF60N55F3 STI60N55F3, STP60N55F3, STU60N55F3 N-channel 55 V, 6.5 mω, 80 A, DPAK, IPAK, D 2 PAK, I 2 PAK, TO-220 TO-220FP STripFET III Power MOSFET Features Type V DSS R DS(on)
More informationVN5R003H-E. 3 mω reverse battery protection switch. Features. Description. Application
3 mω reverse battery protection switch Datasheet production data Features Max supply voltage V CC -16 to 41 V Operating voltage range V CC -16 to 28 V On-state resistance R ON 3mΩ General Optimized electromagnetic
More informationSCR, 12 A, 15mA, 500 V, SOT78. Planar passivated SCR (Silicon Controlled Rectifier) in a SOT78 plastic package.
Rev. 5 2 March 29 Product data sheet 1. Product profile 1.1 General description Planar passivated SCR (Silicon Controlled Rectifier) in a SOT78 plastic package. 1.2 Features and benefits High reliability
More informationLM2901. Low-power quad voltage comparator. Features. Description
Low-power quad voltage comparator Features Wide single supply voltage range or dual supplies for all devices: +2 V to +36 V or ±1 V to ±18 V Very low supply current (1.1 ma) independent of supply voltage
More informationTPI. Tripolar protection for ISDN interfaces. Features. Description. Complies with following standards. Benefits
Tripolar protection for ISDN interfaces Features Bidirectional triple crowbar protection Peak pulse current: I PP = 30, 10/1000 µs Breakdown voltage: TPI80N: 80 V TPI120N: 120 V vailable in SO-8 package
More informationPINNING - TO220AB PIN CONFIGURATION SYMBOL
BTA4 series GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated triacs in a plastic envelope, SYMBOL PARAMETER MAX. MAX. UNIT intended for use in applications requiring high bidirectional transient and
More informationSPC5-FLASHER. Flash management tool for SPC56xx family. Description. Features
Flash management tool for SPC56xx family Data brief Flash verify: check the Flash content with a binary image file Unsecure sequence for censored device: sending the private password selected from the
More informationObsolete Product(s) - Obsolete Product(s)
Vertical deflection booster for 3 App TV/monitor applications with 0 V flyback generator Features Figure. Heptawatt package Power amplifier Flyback generator Stand-by control Output current up to 3.0 App
More informationAN2604 Application note
AN2604 Application note STM32F101xx and STM32F103xx RTC calibration Introduction The real-time clock (RTC) precision is a requirement in most embedded applications, but due to external environment temperature
More informationDISCRETE SEMICONDUCTORS DATA SHEET. BT151 series C Thyristors
DISCRETE SEMICONDUCTORS DATA SHEET Product specification April 24 Product specification GENERAL DESCRIPTION QUICK REFERENCE DATA Passivated thyristors in a plastic SYMBOL PARAMETER MAX. MAX. MAX. UNIT
More informationDSL03. Low capacitance TVS for high speed lines such as xdsl. Description. Features. Complies with the following standards
Low capacitance TVS for high speed lines such as xdsl Description Datasheet - production data Features High surge capability to comply with GR-1089 and ITU-T K20/21 Keeps its peak power capability up to
More informationAN2389 Application note
Application note An MCU-based low cost non-inverting buck-boost converter for battery chargers Introduction As the demand for rechargeable batteries increases, so does the demand for battery chargers.
More informationSTIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
More informationSingle LNB supply and control IC DiSEqC 1.X compliant with EXTM based on the LNBH29 in a QFN16 (4x4) Description
Single LNB supply and control IC DiSEqC 1.X compliant with EXTM based on the LNBH29 in a QFN16 (4x4) Data brief Low-drop post regulator and high-efficiency step-up PWM with integrated power N-MOS allowing
More informationVN03. ISO high side smart power solid state relay PENTAWATT. Features. Description. www.tvsat.com.pl
ISO high side smart power solid state relay Features Type V DSS R DS(on) I n (1) Maximum continuous output current (a) : 4A @ Tc= 25 C 5V logic level compatible input Thermal shutdown Under voltage protection
More informationSTCS1. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3x3 mm)
More informationTIC225 SERIES SILICON TRIACS
Copyright 200, Power Innovations Limited, UK JULY 975 - REVISED MARCH 200 Sensitive Gate Triacs 8 A RMS, 70 A Peak Glass Passivated Wafer 400 V to 800 V Off-State Voltage Max I GT of 5 ma (Quadrant ) MT
More informationVN05N. High side smart power solid state relay PENTAWATT. Features. Description
High side smart power solid state relay Features Type V DSS R DS(on) I OUT V CC VN05N 60 V 0.18 Ω 13 A 26 V Output current (continuous): 13A @ Tc=25 C 5V logic level compatible input Thermal shutdown Under
More informationSTW34NB20 N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET
N-CHANNEL 200V - 0.062 Ω - 34A TO-247 PowerMESH MOSFET Table 1. General Features Figure 1. Package Type V DSS R DS(on) I D STW34NB20 200 V < 0.075 Ω 34 A FEATURES SUMMARY TYPICAL R DS(on) = 0.062 Ω EXTREMELY
More informationAN3354 Application note
Application note STM32F105/107 in-application programming using a USB host 1 Introduction An important requirement for most Flash-memory-based systems is the ability to update firmware installed in the
More informationAN2680 Application note
Application note Fan speed controller based on STDS75 or STLM75 digital temperature sensor and ST72651AR6 MCU Introduction This application note describes the method of defining the system for regulating
More informationAN4156 Application note
Application note Hardware abstraction layer for Android Introduction This application note provides guidelines for successfully integrating STMicroelectronics sensors (accelerometer, magnetometer, gyroscope
More informationSTP62NS04Z N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET
N-CHANNEL CLAMPED 12.5mΩ - 62A TO-220 FULLY PROTECTED MESH OVERLAY MOSFET TYPE V DSS R DS(on) I D STP62NS04Z CLAMPED
More informationMC34063AB, MC34063AC, MC34063EB, MC34063EC
MC34063AB, MC34063AC, MC34063EB, MC34063EC DC-DC converter control circuits Description Datasheet - production data Features DIP-8 SO-8 Output switch current in excess of 1.5 A 2 % reference accuracy Low
More informationSTLM20. Ultra-low current 2.4 V precision analog temperature sensor. Features. Applications
Ultra-low current 2.4 V precision analog temperature sensor Features Precision analog voltage output temperature sensor ±1.5 C maximum temperature accuracy at 25 C (±0.5 C typical) Ultra-low quiescent
More informationAN2866 Application note
Application note How to design a 13.56 MHz customized tag antenna Introduction RFID (radio-frequency identification) tags extract all of their power from the reader s field. The tags and reader s antennas
More informationUSBP01-5M8. ESD protection for enhanced micro USB interface. Features. Applications. Description. Complies with following standards
USBP01-5M8 ESD protection for enhanced micro USB interface Datasheet production data Features D+/D- and ID lines protection with 7 V low voltage diodes (LV) V BUS line protection with 32 V high voltage
More informationSTCS1A. 1.5 A max constant current LED driver. Features. Applications. Description
1.5 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 1.5 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic DFN8 (3 x 3
More informationAN3110 Application note
Application note Using the STVM100 to automatically adjust VCOM voltage in e-paper Introduction The widespread use of multimedia electronic devices, coupled with environmental concerns over the manufacturing
More informationlogic level for RCD/ GFI applications
logic level for RCD/ GFI applications BT68 series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope, intended
More informationObsolete Product(s) - Obsolete Product(s)
32 W hi-fi audio power amplifier Features High output power (50 W music power IEC 268.3 rules) High operating supply voltage (50 V) Single or split supply operations Very low distortion Short-circuit protection
More informationAN3359 Application note
Application note Low cost PCB antenna for 2.4GHz radio: Meander design 1 Introduction This application note is dedicated to the STM32W108 product family from STMicroelectronics. One of the main reasons
More informationNE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description
NE555 SA555 - SE555 General-purpose single bipolar timers Features Low turn-off time Maximum operating frequency greater than 500 khz Timing from microseconds to hours Operates in both astable and monostable
More informationlogic level for RCD/ GFI/ LCCB applications
logic level for RCD/ GFI/ LCCB applications BT68W series GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated, sensitive gate SYMBOL PARAMETER MAX. MAX. MAX. MAX. UNIT thyristors in a plastic envelope
More informationUM0985 User manual. Developing your STM32VLDISCOVERY application using the IAR Embedded Workbench software. Introduction
User manual Developing your STM32VLDISCOVERY application using the IAR Embedded Workbench software Introduction This document provides an introduction on how to use IAR Embedded Workbench for ARM software
More informationST19NP18-TPM-I2C. Trusted Platform Module (TPM) with I²C Interface. Features
Trusted Platform Module (TPM) with I²C Interface Data brief Features Single-chip Trusted Platform Module (TPM) Embedded TPM 1.2 firmware I²C communication interface (Slave mode) Architecture based on ST19N
More informationSM6T. Transil. Features. Description. Complies with the following standards. Peak pulse power: 600 W (10/1000 µs).
Transil Features Peak pulse power: 600 W (10/1000 µs) 4 kw (8/20 µs) Breakdown voltage range: from 6.8 V to 220 V Unidirectional and bidirectional types Low leakage current: 0.2 µa at 25 C 1 µa at 85 C
More informationNE555 SA555 - SE555. General-purpose single bipolar timers. Features. Description
NE555 SA555 - SE555 General-purpose single bipolar timers Features Low turn-off time Maximum operating frequency greater than 500 khz Timing from microseconds to hours Operates in both astable and monostable
More informationSTCS2A. 2 A max constant current LED driver. Features. Applications. Description
2 A max constant current LED driver Features Up to 40 V input voltage Less than 0.5 V voltage overhead Up to 2 A output current PWM dimming pin Shutdown pin LED disconnection diagnostic Slope control with
More informationAN3998 Application note
Application note PDM audio software decoding on STM32 microcontrollers 1 Introduction This application note presents the algorithms and architecture of an optimized software implementation for PDM signal
More informationHow To Write A Circuit Imprim\U00E9
Réalisation de circuits imprimés EXTRA1 1996 / 2002 Projet 3 - GRADATOR / Gradateur à TRIAC Projet : EXTRA1 Info : [DATA216] Révision : novembre 2000 Figure 3.1. Vue du circuit imprimé (images-composants\xx.jpg).
More informationSTW20NM50 N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET
N-CHANNEL 550V @ Tjmax - 0.20Ω - 20ATO-247 MDmesh MOSFET TYPE V DSS (@Tjmax) R DS(on) I D STW20NM50 550V < 0.25Ω 20 A TYPICAL R DS (on) = 0.20Ω HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED
More informationSTP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET
STP80NF55-08 STB80NF55-08 STB80NF55-08-1 N-CHANNEL 55V - 0.0065 Ω - 80A D2PAK/I2PAK/TO-220 STripFET II POWER MOSFET TYPE V DSS R DS(on) I D STB80NF55-08/-1 STP80NF55-08 55 V 55 V
More informationSTOD2540. PMOLED display power supply. Features. Application. Description
PMOLED display power supply Features Inductor switches boost controller PFM mode control High efficiency over wide range of load (1 ma to 40 ma) Integrated load disconnect switch Over voltage protection
More information