ACCESSORIES SHIPPED IN THE BOX 29-Mar-16

Transcription

1 ACCESSORIES SHIPPED IN THE BOX Array Models Mounting Bracket w/ Lock Arm Mounting Bracket w/ Lock Arm for Mounting Bracket w/ Lock Arm for XRfor XR-500/600, X2-120, XD2- XR-2000 and XR and XR , XD4-130, XD4-240 Read Me First Document 15/16" Twist clip (caddy clips), 1/2" stud used for installation to non-recessed suspension ceiling ONLY. Nut, Hex, 1/4-20 Serr Flange, ZPS XR-500/600 1 X XD XD4-130/XD XR-2000/ XR XR-6000/

2 Xirrus Array/AP Mounting Guide J-Box WALL MOUNTING USING KEY HOLES WALL MOUNTING USING MOUNTING BRACKET VERTICAL WALL MOUNT SHORT BRACKET VERTICAL WALL MOUNT WITH LONG BRACKET + Array Model XE-500-MOUNT + XR-500/600 XE-500-JBOX Built-in feature XE-500-MOUNT XE-500-WALL XE-500-MOUNT + XE-4010-WALL X2-120 XE-500-JBOX Built-in feature included XE-500-WALL XE-4010-WALL XD2-240 XE-500-JBOX Built-in feature included XE-500-WALL XE-4010-WALL XD4-130/XD4-240 Not Available Built-in feature included NA XE-4010-WALL XR-2000/2005 Not Available NA included NA XE-4010-WALL XR-4000 Not Available NA included NA XE-4010-WALL XR-6000/7000 Not Available NA included NA XE-4010-WALL

3 SUSPENSION GRID MOUNTING OPTIONS 15/16" SUSPENSION GRID RECESSED AND NON-RECESSED 9/16" SUSPENSION GRID RECESSED AND NON- RECESSED SLOTTED SUSPENSION GRID (9/16") CEILING TYPE T-Bar bracket (with spacers) + 9/16" Twist Clips with 1/2" stud 1 TBolt slot 1 OR 15/16" Twist Clips with 1/2" XR-500/600 XE-500-MOUNT XE-500-MOUNT + XE-THINCLIP-KIT XE-500-MOUNT + XE-TBOLT-KIT X /16" Twsit clips included, order XE-CLIP-KIT-01 for recessed XE-THINCLIP-KIT-01 XE-TBOLT-KIT-01 XD /16" Twsit clips included, order XE-CLIP-KIT-01 for recessed XE-THINCLIP-KIT-01 XE-TBOLT-KIT-01 XD4-130/XD /16" Twist clip included, order XE-CLIP-KIT-01 for recessed XE-THINCLIP-KIT-01 XE-TBOLT-KIT-01 XR-2000/ /16" Twist clip included, order XE-CLIP-KIT-01 for recessed XE-THINCLIP-KIT-01 XE-TBOLT-KIT-01 XR /16" Twist clip included, order XE-CLIP-KIT-01 for recessed XE-THINCLIP-KIT-01 XE-TBOLT-KIT-01 XR-6000/ /16" Twist clip included, order XE-CLIP-KIT-01 for recessed XE-THINCLIP-KIT-01 XE-TBOLT-KIT-01 1 Twist clips can be use only on non-recessed ceilings

4 ENCLOSURES AND SNAP-ONS 28-Mar-16 STADIUM UNDER THE SEAT STADIUM UNDER THE CONCRETE with REFLECTOR SNAP-ON COVER T-BAR Enclosure I-Beam Gym - Wall Gym - I-Beam Factory - I-Beam 2 Outdoor 3 XR-500/600 1 XE-600-STADIUM-OMNI XE-600-STADIUM-FOCUS XE-500-SNAPON 4 TBAR XE-500-MOUNT + XE XE-500-MOUNT + XE IBEAM XE-500-MOUNT + XE WALL-GYM XE-500-MOUNT + XE IBEAM-GYM XE-500-MOUNT + XE IBEAM-MFG XE-500-MOUNT + XE OUTDOOR X2-120 XE-STADIUM-OMNI XE-STADIUM-FOCUS NA XE-6000-TBAR XE-4000-IBEAM XE-4000-WALL-GYM XE-4000-IBEAM-GYM XE-6000-IBEAM-MFG XE-4000-OUTDOOR XD2-240 XE-STADIUM-OMNI XE-STADIUM-FOCUS NA XE-6000-TBAR XE-4000-IBEAM XE-4000-WALL-GYM XE-4000-IBEAM-GYM XE-6000-IBEAM-MFG XE-4000-OUTDOOR XD4-130/XD4-240 NA NA NA XE-6000-TBAR XE-4000-IBEAM XE-4000-WALL-GYM XE-4000-IBEAM-GYM XE-6000-IBEAM-MFG XE-4000-OUTDOOR XR-2000/2005 NA NA XE-2000-SNAPON XE-6000-TBAR XE-4000-IBEAM XE-4000-WALL-GYM XE-4000-IBEAM-GYM XE-6000-IBEAM-MFG XE-4000-OUTDOOR XR-4000 NA NA XE-4000-SNAPON XE-6000-TBAR XE-4000-IBEAM XE-4000-WALL-GYM XE-4000-IBEAM-GYM XE-6000-IBEAM-MFG XE-4000-OUTDOOR XR-6000/7000 NA NA XE-6000-SNAPON XE-6000-TBAR XE-4000-IBEAM XE-4000-WALL-GYM XE-4000-IBEAM-GYM XE-6000-IBEAM-MFG XE-6000-OUTDOOR 1 Order XE-500-MOUNT for mounting XR-520 to ceilings or in XE-4000-xxx or XE-6000-xxx enclosures 2 Order one power injector 75W or higher to power each enclosure 3 Order one 95W power injector (XE-4000-OUTDOOR) or 75W or higher (XE-4000-POE) to power each enclosure; order one of the mounting kits from the table below with each enclosure 4 Only for XR-520 and XR-620. Incompatible with XR-630 due to thermal stress. 7 For 15/16" T-bar suspension grid, use either 15/16" twist clip with 1/2" stud, SKU XE-CLIP-KIT or TbarX that is included on all array Mounting Kits for XE-XXXX-OUTDOOR Model Number XE-6000-OUT-MNT-POLE XE-6000-OUT-MNT-CEIL XE-6000-OUT-MNT-WALL Description Pole mounting kit Ceiling mounting kit Wall mounting kit Enclosure Versions XE-4000-OUTDOOR and XE-6000-OUTDOOR XE-4000-OUTDOOR and XE-6000-OUTDOOR XE-4000-OUTDOOR and XE-6000-OUTDOOR

5 Xirrus Injector Guide Model Generic PoE Switch (802.3af) Generic PoE+ Switch (802.3at) Xirrus XT-5024/48 Switches XP1-MSI-20 XP1-MSI-30 XP1-MSI-33 XP1-MSI-75 Manufactured Before Dec 2009 Manufactured After Dec 2009 with with label label XP1-MSI-75M XP2-MSI-95M XP8-MSI-70 XP8-MSI-70M "POE-75U-1UP-R" "POE-75U-1UP-X" XR XH2-120 X2-120 XR-520/520H XD / XD4 XD4-130 XD4-240 XR-620 XR-630 XR-1220 XR-1230 XR-1230H 1 XR-2225/26 XR-2235/36 XR-2425/26 XR-2425H 1 XR-2435/36 XR-2220 XR-2230 XR-2420 XR-2430 XR-4420/26 XR-4430/36 XR-4820/26 XR-4830/36 XR-6820 (1 port) XR-6830/36 (1 port) XR-7220 (1 port) XR-7230 (2 port) XR-7620 (1 port) XR-7630 (2 port) Important - You must allow for loss of 4.4W between Array/AP and switch or injector output. Cat 5e or Cat 6 cable is required; total run must be under 100m. 1 When installing multiple 1230H or 2425H to a common metal surface or pole, individual injectors (XP1-MSI-75 or XP1-MSI-75M) must be used to properly power the array. For more details on the installation recommendation and options, please refer to the installation manual. 2 The XR320 can be powered by an external 48VDC power supply that meets these specifications OUTPUT POWER +48VDC NOMINAL LOAD CURRENT 0.63A Reference XR-320 External Power Supply : Mean Well GS36U48-P1J RIPPLE AND NOISE At 20Mhz, and output parallel with 0.1uF & 10uF capacitors to ground. Temperature at 25 C, At nominal input voltage CONNECTOR Jack Plug 55*2.5*11.5mm POLARITY

6 Xirrus Array/Cable /Antenna Interconnection Guide XH2-120 Cabling Antennas Part Number Info Part Number Info 10' AP to antenna cable. Cable is LMR 195 with two male ANT-CAB MM -0 N-type connector. 15 Degree Beamwidth 2x2 panel antenna 2.4G only 17dBi ANT-DIR15-2x2-2.4G-01 Two N-type female connectors per band. ANT-CAB MF 10' extension cable, LMR-400, male N to female N connectors. 15 Degree Beamwidth 2x2 panel antenna 5.0G only 17dBi ANT-DIR15-2x2-5.0G-01 Two N-type female connectors per band. ANT-DIR30-2X Degree Beamwidth 2x2 panel antenna 2.4GHz and 5GHz 14dBi. Two N-type female connectors per band. Connection Information XH2-120 Uses N Type (female) connectors ANT-DIR60-2X2-01 ANT-DIR90-2X2-01 ANT-OMNI-2X2-03 ANT-OMNI-1x1-03 ANT-OMNI-1x Degree Beamwidth 2x2 panel antenna, 2.4GHz and 5GHz 8dBi. Two N-type female connectors per band. 90 Degree Beamwidth 2x2 panel antenna. 2.4GHz or 5GHz 6dBi Includes two 12" antenna leads terminating in female N type connectors. Requires ANT-CAB MM -02 to connect to XH2-120 Does not require changing antenna connections to switch bands. Omnidirectional 2.4GHz and 5GHz 5dBi cylindrical antenna. Two N-type female connectors per Band Omnidirectional Dipole Antenna, Dual Band 2.4/5 GHZ. "Rubber Duck" Type Antenna attaches directly to N-Type connector in the XH2-120 One antenna per N-Type connector Omnidirectional 2.4GHz/5GHz, 4DBI, OMNI-DIRECTIONAL, STUB antenna Antenna attaches directly to N-Type connector in the XH2-120 One antenna per N-Type connector Standard Deployment Examples (shown with only single Radio Connection) Direct Connection All Antennas on Xirrus Pricelist use N-Type Female Connectors Except : Omni 'Rubber Duck' Type Except 2x2 Omni Antennas w/ pingtail used for the XR-520H XH2-120 use 2 N-type connectors for external antenna connection - per radio XR-1230H use 3 N-style connectors for external antenna connections - per radio XR-520H & XR-2425H use 2 RP-TNC connectors for external antenna connections - per radio XN Series Array use 1 N-style connector for external antenna connections - per radio Connection with extension cable + 2 antenans per radio + + (2) ANT-CAB MM-02 per band CHOICE OF ANTENNA: ANT-OMNI-2x2-03 ANT- DIR90-2x2-01 ANT-DIR60-2x2-01 ANT-DIR30-2x2-01 ANT-DIR15-2x2-2.4G-01 ANT-DIR15-2x2-5.0G-01 * Use ANT-CAB MF if longer reach required (2) cables per band expect 15 degree antennas that requires ONLY tw

7 Xirrus Array/Cable /Antenna Interconnection Guide XR-520H Cabling Antennas Part Number Info Part Number Info 10' AP to antenna cable. Cable is LMR 200 with one male RP-TNC connector and one male N-type ANT-CAB MM connector. 10' extension cable, LMR-400, male N to female N ANT-CAB MF connectors. 15 Degree Beamwidth 2x2 panel antenna 2.4G only 17dBi ANT-DIR15-2x2-2.4G-01 Two N-type female connectors per band. 15 Degree Beamwidth 2x2 panel antenna 5.0G only 17dBi ANT-DIR15-2x2-5.0G-01 Two N-type female connectors per band. ANT-DIR30-2X Degree Beamwidth 2x2 panel antenna 2.4GHz and 5GHz 14dBi. Two N-type female connectors per band. Connection Information Uses RP-TNC (female) Connectors 2x2 MIMO Antenna Design - Requires 2 cables per Radio, 4 cables per unit ANT-DIR60-2X2-01 ANT-DIR90-2X2-01 ANT-OMNI-2X2-02 ANT-OMNI-1x Degree Beamwidth 2x2 panel antenna, 2.4GHz and 5GHz 8dBi. Two N-type female connectors per band. 90 Degree Beamwidth 2x2 panel antenna. 2.4GHz or 5GHz 6dBi Includes two 12" antenna leads terminating in female N type connectors. Requires ANT-CAB MM to connect to XR-520 Does not require changing antenna connections to switch bands. Omnidirectional 2.4GHz and 5GHz 5dBi cylindrical antenna. Includes four 36" antenna leads terminating in male RP-TNC connectors. Recommend a direct connection to XR-520H, no extension Omnidirectional Dipole Antenna, Dual Band 2.4/5 GHZ. "Rubber Duck" Type Antenna attaches directly to RP-TNC connector without the need for cables. One antenna per RP-RNC connectorconnection to XR-520H, no extension Standard Deployment Examples (shown with only single Radio Connection) Use Case All Antennas on Xirrus Pricelist use N-Type Female Connectors Except Omni 'Rubber Duck' Type Except Omni Antennas with attached Pigtails XR-1230H use 3 N-style connectors for external antenna connections - per radio XR-520H & XR-2425H use 2 RP-TNC connectors for external antenna connections - per radio Direct Connection: XR-520H - 2 Antennas per Radio XN Series Array use 1 N-style connector for external antenna connections - per radio (no extension cable recommended) Direct Connection: XR-520H - Antenna Requires TNC to N cable (2) (no extension cable recommended) Use ANT-CAB MF if longer reach required

8 Xirrus Array/Cable /Antenna Interconnection Guide XR-2425H Connection Information Uses RP-TNC (female) Connectors Radio #1 Radio #2 Radio #3 Radio #4 2x2 MIMO Antenna Design - Requires 2 cables per Radio, 8 cables per unit Cabling Antennas Part Number Info Part Number Info 10' AP to antenna cable. Cable is LMR 200 with one male RP-TNC connector ANT-CAB M and one male N-type connector. 10' extension cable, LMR-400, male N ANT-CAB Mto female N connectors. ANT-DIR30-2X2-01 ANT-DIR60-2X2-01 ANT-DIR90-2X2-01 ANT-OMNI-2X2-02 ANT-OMNI-1x Degree Beamwidth 2x2 panel antenna 2.4GHz and 5GHz 14dBi. Two N-type female connectors per band. 60 Degree Beamwidth 2x2 panel antenna, 2.4GHz and 5GHz 8dBi. Two N-type female connectors per band. 90 Degree Beamwidth 2x2 panel antenna. 2.4GHz or 5GHz 6dBi Includes two 12" antenna leads terminating in female N type connectors. Requires ANT-CAB MM to connect to XR-2425H Does not require changing antenna connections to switch bands. Omnidirectional 2.4GHz and 5GHz 5dBi cylindrical antenna. Includes four 36" antenna leads terminating in male RP-TNC connectors. Recommend a direct connection to XR-2425H, no extension Omnidirectional Dipole Antenna, Dual Band 2.4/5 GHZ. "Rubber Duck" Type Antenna attaches directly to RP-TNC connector without the need for cables. One antenna per RP-RNC connector. Connects directly to XR-2425H, no extension Standard Deployment Examples (shown with only single Radio Connection) All Antennas on Xirrus Pricelist use N-Type Female Connectors Except Omni 'Rubber Duck' Type Except Omni Antennas with attached Pigtails XR-1230H use 3 N-style connectors for external antenna connections - per radio XR-520H & XR-2425H use 2 RP-TNC connectors for external antenna connections - per radio XN Series Array use 1 N-style connector for external antenna connections - per radio Direct Connection: XR-2425H - 2 Antennas per Radio (no extension cable recommended) Direct Connection: XR-2425H - Antenna Requires TNC to N cable (2) (no extension cable recommended) Use ANT-CAB MF if longer reach required

9 Xirrus Array/Cable /Antenna Interconnection Guide 17-Aug-15 XR-1230H Part Number Info Part Number Info ANT-CAB MM Cabling 10' Array to antenna cable. Cable is LMR-400, right angle male N to male N connectors. Up to 3 cables required for Radio/Antenna connection Antenna 2.4GHz or 5GHz, 6dBi omni-directional MIMO antenna. ANT-OMNI-MIMO-01 Includes three 36'' antenna cable pigtails with male N connectors. Recommend a direct connection XR-1230H, no extension Radio #2 Radio #1 ANT-CAB MF 10' extension cable. LMR-400, male N to female N connectors. Up to 3 cables required for Radio/Antenna connection 2.4GHz or 5GHz, 14dBi dual polarized panel antenna, with 3 N-Type Female ANT-DIR-MIMO-01 connectors Connection Information Uses N-Type (female) Connectors 2x2 Antenna OptionNOTE: The 2x2 Antennas (XR520) can also be used, but only provide 2 3x3 MIMO Antenna Design - data streams ( 300Mbps Max) and one connector is left disconnected Requires up to 3 cables per Radio, 6 cables per unit Use case Standard Deployment Examples (shown with only single antenna) All Antennas on Xirrus Pricelist use N-Type Female Connectors Except Omni Antennas with attached Pigtails XR-1230H use 3 N-style connectors for external antenna connections - per radio XR-520H & XR-2425H use 2 RP-TNC connectors for external antenna connections - per radio XN Series Array use 1 N-style connector for external antenna connections - per radio Direct Connection: XR-1230H - Antenna Requires N-type to N-type cable (3) (no extension cable recommended) Use ANT-CAB MF if longer reach required