RM/900/M Imperial cylinders

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "RM/900/M Imperial cylinders"

Transcription

1 RM/900/M Imperial cylinders Double acting, Ø 1 1/ Ideal for a wide range of industrial applications Extensive range of mountings Rugged, reliable long established design TECHNICL DT Medium: Compressed air, filtered, lubricated or non-lubricated Operation: RM/900: double acting, adjustable cushioning and non-magnetic RM/900/M: double acting, adjustable cushioning and magnetic piston Operating pressure: bar Operating temperature: -20 C C Consult our Technical Service for use below +2 C MTERILS Barrel: anodized aluminium except Ø 14 inch which is steel End cover: diecast aluminium Bearing housing: brass for 1 1/4 inch to 3 inch (Ø 4 inch to 14 inch aluminium) Piston: aluminium Piston rod and tie rods: stainless steel (Martensitic) Seals: nitrile rubber O-rings: nitrile rubber STNDRD MODELS Ø inch Piston rod Ø Port size MODELS Nonmagnetic Magnetic CCESSORIES Reed switch integral with 5m cable Switch mounting Banjo flow Straight control fitting Tube diameter in bold Elbow fitting Service kit 1 1/4 12 mm G1/8 RM/9125/* RM/9125/M/* M/50/LSU/5V QM/27/2/1 C0K C C QM/9125/00 1 3/4 16 mm G1/4 RM/9175/* RM/9175/M/* M/50/LSU/5V QM/27/2/1 C0K C C QM/9175/ mm G1/4 RM/920/* RM/920/M/* M/50/LSU/5V QM/27/2/1 C0K C C QM/920/00 2 1/2 25 mm G3/8 RM/925/* RM/925/M/* M/50/LSU/5V QM/27/2/1 C0K C C QM/925/ mm G3/8 RM/930/* RM/930/M/* M/50/LSU/5V QM/27/2/1 C0K C C QM/930/ mm G3/8 RM/940/* RM/940/M/* M/50/LSU/5V QM/27/2/1 C0K C C QM/940/ /2 inch G1/2 RM/950/* C0K C C QM/950/00 Non-magnetic 6 1 1/2 inch G1/2 RM/960/* C0K C C QM/960/ /4 inch G3/4 RM/980/* QM/980/ /4 inch G1 RM/9100/* QM/9100/ /4 inch G1 RM/9120/* QM/9120/00 Magnetic /4 inch G1 RM/9140/* QM/9140/00 * Insert stroke length in mm For information on additional magnetic switches see page Other fittings are available, please see section 7 For further information

2 Theoretical forces, cushioning, air consumption MODELS Cushion length Cushion volume Theoretical forces (N) at 6 bar ir consumption (l/cm) per stroke at 6 bar Ø inch (mm) (cm 3 ) outstroke intstroke outstroke intstroke RM/9125/.. 1 1/ ,056 0,047 RM/9175/.. 1 3/ ,109 0,095 RM/920/ ,143 0,124 RM/925/.. 2 1/ ,190 RM/930/ ,318 0,282 RM/940/ ,572 0,516 RM/950/ , ,887 0,807 RM/960/ , ,270 1,191 RM/980/ ,266 2,157 RM/9100/ ,547 3,368 RM/9120/ ,114 4,936 RM/9140/ ,968 6,789 OPTIONS SELECTOR M/9 / / Special variants High temperature version: 150 C max. Substitute T s (mm) 2500 max. Piston rod material Stainless steel (martensitic) Stainless steel (austenitic) Substitute R S Cylinder diameters Ø (inch) Substitute 1 1/ / / Variants (non-magnetic piston) Standard Female piston rod thread Full piston rod thread Piston rod bellow Double ended piston rod Variants (magnetic piston) Standard Female piston rod thread Full piston rod thread Piston rod bellow Double ended piston rod Substitute None X Y G J Substitute M MX MY MG JM Note: If option is not required, disregard option position within part number, eg. RM/920/100. For combinations of cylinder variants consult our Technical Service. Please note that heat resistant seals are not available for all variants. This options selector explains only the cylinder variants. dditional variants/options can not be derived from

3 RM/900/M Imperial cylinders Double acting, Ø 1 1/ MOUNTINGS Cylinder B B + G C D F G H K L Ø inch 1 1/4 M/P6938 QM/819 QM/754 M/P6937 QM/402 M/P6938 M/P14001 M/P6937 QM/ /4 QM/888 QM/1181 QM/753 M/P7457 QM/404 QM/986 M/P11224 M/P7457 QM/922 2 QM/875 QM/1182 QM/752 M/P10228 QM/405 QM/871 M/P8635 QM/962 QM/ /2 QM/876 QM/1184 QM/748 M/P10311 QM/407 QM/877 M/P8636 QM/964 QM/910 3 QM/878 QM/1185 QM/983 M/P10229 QM/407 QM/984 M/P8637 QM/966 QM/911 4 QM/887 QM/1187 QM/982 QM/758 QM/408 QM/987 M/P8638 QM/758 QM/912 5 QM/886 QM/1188 QM/981 QM/759 QM/409 QM/988 M/P8639 QM/759 QM/913 6 QM/884 QM/1189 QM/826 QM/761 QM/409 QM/884 M/P8640 QM/761 QM/914 8 QM/883 QM/1190 QM/825 QM/762 QM/410 QM/883 M/P8645 QM/762 QM/ QM/882 QM/824 QM/411 QM/882 M/P8667 QM/ QM/889 QM/756 QM/411 QM/889 M/P8670 QM/ QM/741 QM/755 QM/411 QM/741 M/P11819 QM/924 Cylinder M N R UF UH UR Ø inch 1 1/4 QM/393 M/P11716 M/P11966 QM/1141 QM/9125/40 QM/ /4 QM/923 M/P7955 M/P11219 QM/1142 QM/9175/40 QM/ QM/908 M/P9969 M/P10349 QM/1143 QM/920/40 QM/ /2 QM/901 M/P9905 M/P10351 QM/1144 QM/925/40 QM/ QM/901 M/P9905 M/P10353 QM/1144 QM/930/40 QM/ QM/902 QM/1475* QM/763 QM/1146 QM/940/40 QM/ QM/903 QM/997* QM/ QM/950/33 6 QM/903 QM/997* QM/ QM/960/33 8 QM/904 - QM/ QM/980/33 10 QM/919 - QM/ QM/919 - QM/ QM/919 - QM/ Note: When fitted with a Foot Mounting Style C the maximum pressure for the 14 inch bore model is 8 bar. * These cannot be supplied separately. If a spare Nose Mounting is required, specify basic cylinder reference with Q prefix and -/06 suffix, e.g. QM/950/N/

4 BSIC DIMENSIONS RM/900, RM/900/M Standard cylinder ZJ + Y PJ + BB BF VD EE PF EE KB øbd BE MM h 9 KK ø 211 TV Cushion screw Ø inch Cushion screw Ø 1 1/ inch ø V 1 2 BW WH G J 11 3 PD DD E 3 For Ø 14 inch only BW MODELS Ø inch V BB Ø BD BE BF BW DD E EE G J KB RM/ /4 14, M 22 x M 6 45 G 1/ RM/ /4 19 8,5 26,5 27 M 27 x M 8 57 G 1/ ,5 RM/ , M 33 x M 8 63,5 G 1/4 29,5 24 6,5 RM/ /2 33, M 39 x 2 25,5 22 M 8 74,5 G 3/ ,5 RM/ , M 39 x 2 25,5 22 M G 3/ RM/ Ø M G 3/ RM/ , Ø 58,5 - Ø 10 M G 1/ RM/ ,5-49,5 - Ø 58,5 - Ø 10 M G 1/ RM/ ,5 - Ø 63,5 - Ø 10 M G 3/ RM/ ,5 - Ø 77 - Ø 10 M G RM/ ,5 - Ø 77 - Ø 10 M G RM/ Ø 89 - Ø 10 M G MODELS Ø inch KK Ø MMh9 PD PF PJ TV VD WH Y ZJ at 0 mm per 25 mm RM/ /4 M , ,5 125,5 0,47 kg 0,06 kg RM/ /4 M ,5 0,91 kg 0,10 kg RM/920 2 M ,5 9, , ,15 kg 0,13 kg RM/ /2 M , ,5 152,5 1,93 kg 0,17 kg RM/930 3 M , , ,5 3,02 kg 0,20 kg RM/940 4 M , ,5 187,5 4,01 kg 0,26 kg RM/950 5 M /2 inch 82, ,5 9,10 kg 0,55 kg RM/960 6 M /2 inch 82,5-115,5 128, ,80 kg 0,80 kg RM/980 8 M /4 inch ,5 168, , ,00 kg 1,00 kg RM/ M /4 inch ,5 209, , ,40 kg 1,90 kg RM/ M /4 inch , , ,60 kg 2,10 kg RM/ M /4 inch , ,5 366,5 99,80 kg 3,00 kg LTERNTIVE VRINTS RM/900/X, RM/900/MX Piston rod end style X MODELS Ø inch F BW KF WG RM/ / M 10 50,5 RM/ / M 10 54,5 RM/ M 12 64,5 RM/ / M 18 84,5 RM/ M 18 89,5 RM/ M RM/ Ø 10 M ,5 RM/ Ø 10 M ,5 RM/ Ø 10 M ,5 RM/ Ø 10 M ,5 RM/ Ø 10 M ,5 RM/ Ø 10 M ,5 KF F BW WG RM/900/Y, RM/900/MY Piston rod end style Y MODELS Ø inch BW KM WD RM/ /4 29,5 10 M 12 39,5 RM/ /4 35,5 12 M RM/ M 18 56,5 RM/ / M RM/ M RM/ M RM/ Ø 10 M RM/ Ø 10 M RM/ Ø 10 M RM/ Ø 10 M ,5 RM/ Ø 10 M ,5 RM/ Ø 10 M ,5 KM BW WD 1-229

5 RM/900/M Imperial cylinders Double acting, Ø 1 1/ RM/900/J, RM/900/JM Cylinder with double ended piston rod MODELS Ø inch PK ZK ZL ZM Y at 0 mm per 25 mm RM/ /4 66,5 128,5 155,5 165,5 49,5 0,65 kg 0,08 kg RM/ /4 69,5 136,5 163,5 173,5 52 1,21 kg 0,13 kg RM/ , ,5 60,5 1,66 kg 0,19 kg RM/ /2 72, , ,5 2,82 kg 0,27 kg RM/ , ,86 kg 0,30 kg RM/ ,5 187, ,5 77,5 5,31 kg 0,41 kg RM/ , , ,85 kg 0,77 kg RM/ , , ,60 kg 1,20 kg RM/ , , ,5 26,91 kg 1,30 kg RM/ , ,5 81,10 kg 2,39 kg RM/ , ,5 105,30 kg 2,59 kg RM/ ,5 366, ,5 153,5 109,00 kg 3,30 kg ZM + 2 x ZL + ZK + Y PK + RM/900/G und RM/900/MG Cylinder with piston rod bellows MODELS Ø inch Ø Max. stroke Piston rod extension B per bellow for first bellow for further bellow RM/9125/.G/.. 1 1/ RM/9175/.G/.. 1 3/ RM/920/.G/ RM/925/.G/ / RM/930/.G/ RM/940.G/ RM/950/.G/ RM/960/.G/ RM/980/.G/ RM/9120/.G/ ø B MOUNTINGS Front flange - B or G Front flange - BG For 9125 cylinder only FB ZF + UF W MF MF E R TF FB OF TF UF E MODELS B MODELS BG MODELS G Ø inch E FB MF OF R TF UF W ZF Weight M/P6938 QM/819 M/P / , , , ,15 kg QM/888 QM/1181 QM/ / , ,5 0,20 kg QM/875 QM/1182 QM/ ,5 85, , ,20 kg QM/876 QM/1184 QM/ /2 75, ,5 93, ,5 0,25 kg QM/878 QM/1185 QM/ ,5 11, , ,5 41,5 195,5 0,45 kg QM/887 QM/1187 QM/ ,5 1,00 kg QM/886 QM/1188 QM/ , , ,5 1,50 kg QM/884 QM/1189 QM/ , , ,40 kg QM/883 QM/1190 QM/ , ,5 314, ,50 kg QM/882 QM/ , ,5 333, ,00 kg QM/889 QM/ ,00 kg QM/741 QM/ ,00 kg 1-230

6 Foot mounting - C T H U ø B O S + TR X + E MODELS Ø inch Ø B H O T U E S TR X Weight QM/ /4 6,8 24 6,5 6,5 14, ,5 0,06 kg QM/ /4 10,5 37, ,5-151,5 0,20 kg QM/ , ,20 kg QM/ / , , ,5 0,25 kg QM/ , ,5 198,5 0,30 kg QM/ , ,5 8 25, ,5 0,65 kg QM/ ,5 82,5 21,5 8 28, , ,00 kg QM/ ,5 99, ,50 kg QM/ , , ,50 kg QM/ ,5 114, ,00 kg QM/ ,5 139, ,50 kg QM/ ,5 212,5 33, , ,5 20,50 kg Foot mounting - D UB XD + ER 2 CD G 7 CB CL L FL MR MODELS Ø inch CB Ø CD G7 CL ER 2 FL L MR UB XD Weight M/P /4 25,4 6 44,5 9,5 14,5 9,5 6,5-139,5 0,08 kg M/P /4 34, , , ,5 0,15 kg M/P , ,5 20,5 28,5 20, ,5 0,25 kg M/P /2 42, ,5 28,5 20, ,25 kg M/P , , , ,5 0,75 kg QM/ , ,5 36, ,5 244,5 1,25 kg QM/ , , , ,5 298,5 2,50 kg QM/ , , ,50 kg QM/ , , , ,00 kg Foot mounting - K ER 2 CD G 7 UB MR L CB XW FL CL MODELS Ø inch CB Ø CD G7 CL ER 2 FL L MR UB XW Weight M/P /4 25,4 6 44,5 9,5 14,5 9,5 6,5-22,5 0,08 kg M/P /4 34, , , ,15 kg QM/ , ,5 20,5 28,5 20,5 13-7,5 0,25 kg QM/ /2 42, ,5 28,5 20, ,5 0,25 kg QM/ , , ,5 14-6,5 0,75 kg QM/ , ,5 36, ,5 7 1,25 kg QM/ , , , ,5 13 2,50 kg QM/ , , ,5 3,50 kg QM/ , , , ,00 kg 1-231

7 RM/900/M Imperial cylinders Double acting, Ø 1 1/ Nose mounting - N KV KW MODELS Ø inch KV KW Weight M/P /4 28 6,5 0,02 kg M/P / ,04 kg M/P ,04 kg M/P / ,04 kg M/P ,04 kg QM/1475* ,06 kg QM/997* ,5 0,18 kg QM/997* ,5 0,18 kg * These cannot be supplied separately. If a spare Nose Mounting is required, specify basic cylinder reference with Q prefix and -/06 suffix, e.g. QM/950/N/06. Rear hinge mounting - L CR FL L SD GL JL HB UD XD + LF max. 120 P TJ R R RC CL MODELS Ø inch CL CR FL GL Ø HB JL L LF P R RC SD TJ UD XD Weight QM/ / ,5 25,5 28,5 7,2 20,5 19 9,5 1,5 25,5 41, ,25 kg QM/ / , ,7 25, ,5 164,5 1,10 kg QM/ ,5 8,5 39,5 25,5 15,5 6,5 47, ,5 68, ,20 kg QM/ / ,5 8,5 39,5 25,5 15,5 6,5 47, ,5 68,5 187,5 1,25 kg QM/ ,5 8,5 39,5 25,5 15,5 6,5 47, ,5 68,5 214,5 1,50 kg QM/ , , , ,5 82, ,50 kg QM/ , , ,5 23, ,5 82,5 285,5 5,00 kg QM/ ,5 114, , ,5 101, ,00 kg QM/ ,5 79, , ,5 31, , ,5 355,5 17,50 kg QM/ ,5 171, , , , ,00 kg QM/ ,5 171, , , , ,00 kg QM/ , , ,5 28,5 139,5 63,5 279, ,5 61,00 kg Rear hinge mounting - M R 1 R 1 TJ 1 P 1 CE CR 1 CL 1 RC 1 HB 1 SD 1 GL 1 JL 1 LF 1 UD 1 MODELS Ø inch CE CL 1 CR 1 GL 1 Ø HB 1 JL 1 LF 1 P 1 R 1 RC 1 SD 1 TJ 1 UD 1 Weight QM/ /4 25, ,5 28,5 7,2 20,5 9,5 1,5 25,5 41,5 0,17 kg QM/ /4 33, ,5 32 8,7 25, ,5 0,30 kg QM/ , , ,40 kg QM/ /2 58, ,5 8,5 39,5 16 6,5 47, ,5 1,00 kg QM/ , ,5 8,5 39,5 16 6,5 47, ,5 1,00 kg QM/ , ,5 74, ,5 2,00 kg QM/ ,5 79, ,3 79,5 28, ,5 3,00 kg QM/ ,5 79, ,3 79,5 28, ,5 32 3,00 kg QM/ ,5 98,5 114, , ,5 12, ,00 kg QM/ , , ,5 120, ,5 41,5 9,00 kg QM/ , , ,5 120, ,5 41,5 9,00 kg QM/ , , ,5 120, ,5 41,5 10,50 kg 1-232

8 Centre trunnion - H TN TK ø TP ø TD g 10 UW XV TL TM UM MODELS Ø inch Ø TDg10 TK TL TM TN Ø TP UM UW XV min XV max Weight M/P / ,5 50,5 20, , ,5 93 0,16 kg M/P / , , ,5 0,50 kg M/P ,5 79, ,5 97 0,60 kg M/P / , ,5 0,90 kg M/P ,5 125,5 1,25 kg M/P ,5 139,5 44,5 44,5 222, , ,50 kg M/P , , ,50 kg M/P , ,5 168,5 5,00 kg M/P , , , ,00 kg M/P , ,00 kg M/P , ,5 238,5 35,00 kg M/P , , , ,5 51,50 kg Note: These mountings are only supplied assembled complete with the cylinder. Unless otherwise specified, units will be supplied with dimension XV plus half the stroke length. Grease nipple supplied as standard on cylinders 9175 to Centre trunnion - UH TN UV ø TP ø TD g 10 UW 1 XV TL TM UM MODELS Ø TDg10 Ø TP TL TM TN UM UV UW 1 XV min XV max Torque Nm Weight QM/9125/ ,5 50,5 20,5 85, , ,24 kg QM/9175/ ,5 120, ,5 8 0,43 kg QM/920/ ,5 79, , ,70 kg QM/925/ , ,5 8 1,14 kg QM/930/ ,5 125,5 10 1,30 kg QM/940/ ,5 41,5 139,5 44,5 222, , ,32 kg Note: It is most important that the locking screws which secure the mounting to the tie rods are tightened to the torque figures shown in the above table. For maximum energy input, consult our Technical Service. Piston rod clevis - F CR CL CM ER CE ø EK g 10 LE MODELS Ø inch CE CL CM CR Ø EKg10 ER LE Weight QM/ /4 25,5 12,5 6, ,5 11 0,03 kg QM/ /4 33, ,5 0,05 kg QM/ ,5 25, ,10 kg QM/ /2 58, ,5 0,40 kg QM/ , ,5 0,40 kg QM/ ,5 44, ,5 0,90 kg QM/ , ,25 kg QM/ , ,25 kg QM/ ,5 63, ,70 kg QM/ , ,5 2,75 kg QM/ , ,5 2,75 kg QM/ , ,5 4,50 kg 1-233

9 RM/900/M Imperial cylinders Double acting, Ø 1 1/ Rear eye - R EW XD 2 + ER CD 1 G 7 UD L 1 FL 1 MR 1 MODELS Ø inch Ø CD 1G7 ER EW FL 1 L 1 MR 1 UD XD 2 Weight M/P / , ,10 kg M/P / , ,5 0,26 kg M/P , , ,55 kg M/P / , , ,5 0,80 kg M/P , , ,5 214,5 0,90 kg QM/ ,5 44, , ,60 kg QM/ ,5 44, , ,5 3,60 kg QM/ ,5 63, , ,20 kg QM/ ,5 79,5 47,5 25,5 217,5 355,5 11,50 kg QM/ ,5 101,6 95, , ,60 kg QM/ ,5 101,6 95, ,30 kg QM/ , ,5 32,80 kg Universal piston rod eye - UF CN H 7 LD max LF min KX KV 1 EN - 0,1 EF CH MODELS Ø inch CH Ø CN H7 EF EN-0,1 KV 1 KX LD max. LF min. Z Weight QM/ / ,07 kg QM/ / ,13 kg QM/ ,17 kg QM/ /2 96, ,43 kg QM/ , ,43 kg QM/ ,44 kg Universal rear eye - UR UD 1 XD 1 + CN H 7 EN LT ER 1 MODELS Ø inch Ø CN H7 EN ER 1 LT UD 1 XD 1 Z Weight QM/ / ,5 151,5 13 0,18 kg QM/ / ,5 166,5 12 0,30 kg QM/ ,43 kg QM/ / ,5 12 0,60 kg QM/ ,5 214,5 12 0,75 kg QM/ ,40 kg QM/950/ ,70 kg QM/960/ ,60 kg QM/980/ ,30 kg 1-234

10 BRCKETS QM/27/2/1 Bracket Switches: M/ B 1 Bracket 2 Switch Cylinder Ø B Weight 1 1/4 9 30,5 0,010 kg 1 3/4 8 35,5 0,010 kg ,010 kg 2 1/2 7 44,5 0,010 kg ,5 0,010 kg ,010 kg QM/31/000/22 Bracket Switches: QM/32, QM/ Bracket 2 B 2 Switch Cylinder Ø B Weight 1 1/4 4,5 42 0,010 kg 1 3/4 1,5 47 0,010 kg 2 3,5 52 0,010 kg 2 1/2 0,5 58 0,010 kg 3-4,5 64 0,010 kg ,010 kg 1-235

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431) Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,

More information

KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting

KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56

More information

RM/8000/M, ISO cylinder Magnetic piston, double acting

RM/8000/M, ISO cylinder Magnetic piston, double acting > > Ø 0... 5 mm > > Magnetic piston as standard > > Conforming to ISO 6 > > Corrosion resistant- With buffer or adjustable cushioning > > Nose mounting nut and piston rod supplied locknut as standard Technical

More information

RM/55401/M, Roundline cylinder Magnetic piston, double acting

RM/55401/M, Roundline cylinder Magnetic piston, double acting RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed

More information

STANDARD STROKES Ø M 2 P 050 A 0200

STANDARD STROKES Ø M 2 P 050 A 0200 > Cylinders Series 6 CATALOGUE > Release 8.5 Cylinders Series 6 Aluminium profile New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperatures versions ø 32, 40,

More information

ACT-72. DA/8000 Double acting Ø mm

ACT-72. DA/8000 Double acting Ø mm ISO/VDMA Cylinders DA/8000 Double acting Ø 32... 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:

More information

RA/8000/M, RA/8000, ISO cylinder Magnetic & Non-magnetic piston, double acting

RA/8000/M, RA/8000, ISO cylinder Magnetic & Non-magnetic piston, double acting R/8000/M, R/8000, ISO cylinder > >... 0 mm > > Comprehensive range for the utmost versatility > > Supplied complete with piston rod locknut > > Comprehensive range of standard mountings > > Conforms to

More information

Cylinders DIN ISO 6431 and VDMA 24 562

Cylinders DIN ISO 6431 and VDMA 24 562 Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets

More information

RA/8000/M, RA/8000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 320 mm

RA/8000/M, RA/8000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 320 mm Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 30 mm Comprehensive range for the utmost versatility Conforms to ISO 555 (ISO 643, VDM 456 and NFE 49-003-) High performance,

More information

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,

More information

DOUBLE ACTING CYLINDERS, Ø 32 to 125 mm

DOUBLE ACTING CYLINDERS, Ø 32 to 125 mm DOUBLE ACTING CYLINDERS, 3 to 15 mm conforming to ISO 6431 - VDMA 456 STANDARDS SERIES 450 - TYPE : PES (with profiled barrel) P30-GB.R8 DOUBLE ACTING PNEUMATIC CYLINDERS - TYPE PES WITH PROFILED BARREL

More information

Normcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB

Normcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according

More information

PRA/182000/M; PRA/182000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 125 mm

PRA/182000/M; PRA/182000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 125 mm P/8000/M; P/8000 Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 5 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders

More information

Piston rod cylinder Tie rod cylinder Series 167. Brochure

Piston rod cylinder Tie rod cylinder Series 167. Brochure Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting

More information

Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure

Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional

More information

Piston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure

Piston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional

More information

Stainless Steel Cylinders DIN ISO 6431 and VDMA 24 562

Stainless Steel Cylinders DIN ISO 6431 and VDMA 24 562 Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYPE MAGNETIC STANDARD AMX STAINLESS STEEL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed

More information

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent

More information

DOUBLE ACTING CYLINDERS, Ø 25 to 200 mm

DOUBLE ACTING CYLINDERS, Ø 25 to 200 mm DOUBLE ACTING CYLINDERS, 25 to 200 mm CONFORMING WITH CNOMO / AFNOR STANDARDS TRINORM CNOMO / AFNOR - SERIES 437 - TYPE: PCN 2 P245-GB-R3a Series 437 Type: PCN CONSTRUCTION Barrel : stainless ( 25), drawn

More information

TECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES

TECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES Pneumatic cylinders mm according to ISO 643 and VDMA 56 with adjustable cushioning UNIVER pneumatic cylinders which comply with ISO 643 and VDMA 56 standards, take advantage of the improvements arising

More information

Port size 32 12 G1/8 RA/8032/* RA/8032/M/* QA/8032/00 100 25 G1/2 RA/8100/* RA/8100/M/* QA/8100/00

Port size 32 12 G1/8 RA/8032/* RA/8032/M/* QA/8032/00 100 25 G1/2 RA/8100/* RA/8100/M/* QA/8100/00 Actuators ISO/VDMA Cylinders RA/8000/M Ø 32 to 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:

More information

ISO/VDMA Actuators. Engineering GREAT Solutions

ISO/VDMA Actuators. Engineering GREAT Solutions ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to

More information

Hydraulic cylinder Mill type. CDL2 type. Contents. Features. RE 17326 Version: 2013-06 Replaces: 12.12. Series L2 Component series 1X

Hydraulic cylinder Mill type. CDL2 type. Contents. Features. RE 17326 Version: 2013-06 Replaces: 12.12. Series L2 Component series 1X Hydraulic cylinder Mill type CDL2 type RE 17326 Version: 2013-06 Replaces: 12.12 Series L2 Component series 1X 2 pressure ranges: Nominal pressure 160 bar [16 MPa] Nominal pressure 250 bar [25 MPa] Features

More information

AA SERIES. Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI

AA SERIES. Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI AA SERIES Light-Duty Aluminum Pneumatic Cylinders Pressure Rating 200 PSI Parts List 1 1 /2", 2" AND 2 1 /2" BORE SIZE 3 27 13 21 24 25 1 71 33 16B 30 1,2 Head and Cap Accurately machined from aluminum

More information

Compact cylinders ADVU/AEVU

Compact cylinders ADVU/AEVU Compact cylinders ADVU/AEVU Compact cylinders ADVU Product range overview Function Version Type Piston Stroke Position sensing [mm] [mm] Doubleacting Basic version ADVU Piston rod at one end 12, 16 5,

More information

Lehigh High Pressure Hydraulic Cylinders Nominal Pressure 3000 PSI* (5000 PSI Non-Shock) Manufacturing Engineering At It s Best

Lehigh High Pressure Hydraulic Cylinders Nominal Pressure 3000 PSI* (5000 PSI Non-Shock) Manufacturing Engineering At It s Best Lehigh High Pressure Hydraulic Cylinders Nominal Pressure 3000 PSI* (5000 PSI Non-Shock) Manufacturing Engineering At It s Best To meet today s wide range of advanced technology for pressure and force

More information

-U- Type to be discontinued

-U- Type to be discontinued Standard cylinders DNU/DNUL, For new designs use standard cylinders DNC 1 / 1.2-24 Double-acting For contactless position sensing Comprehensive range of accessories 2003/10 Subject to change Products 2004/2005

More information

Short stroke cylinders W series Ø mm

Short stroke cylinders W series Ø mm Short stroke cylinders W series mm The wide product range and unique design make Univer Short stroke cylinders W series essential for all applications where compact overall dimensions and short strokes

More information

Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08

Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08 Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

M/60285... M/60288 Rotary vane actuators, double acting

M/60285... M/60288 Rotary vane actuators, double acting M/6085... M/6088 > > Torque at 6 bar 5,78...,7 Nm > > Suitable for torques from,... 0,6 Nm > > High torque from compact units > > Rotation angles from 90... 70 Technical features Medium: Compressed air,

More information

Piston rod cylinder Diaphragm actuator, power transducer and pressure intensifier Series RDC. Brochure

Piston rod cylinder Diaphragm actuator, power transducer and pressure intensifier Series RDC. Brochure Piston rod cylinder Diaphragm actuator, power transducer and pressure intensifier Brochure 2 Piston rod cylinder Diaphragm actuator, power transducer and pressure intensifier Diaphragm and piston actuators,

More information

M/60280... M/60284, M/60280 /TI... M/60284/TI MINI-Rotary vane actuators, double acting

M/60280... M/60284, M/60280 /TI... M/60284/TI MINI-Rotary vane actuators, double acting M/6080... M/608, M/6080 /TI... M/608/TI > > Torque at 6 bar 0,... 9,0 Nm > > Suitable for torques from 0,09... 6,6 Nm > > ompact design > > Angle of rotation from... 0 Technical features Medium: ompressed

More information

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition

More information

Guide cylinder, Series GPC-BV Ø mm double-acting Plain bearing cushioning: elastic with magnetic piston

Guide cylinder, Series GPC-BV Ø mm double-acting Plain bearing cushioning: elastic with magnetic piston Bosch Rexroth AG Pneumatics Ambient temperature min./max. -10 C / +70 C Medium temperature min./max. -10 C / +70 C Medium Compressed air Max. particle size 50 µm Oil content of compressed air 0 mg/m³ -

More information

Cylinder Series PNC, to ISO 6431 and VDMA

Cylinder Series PNC, to ISO 6431 and VDMA Cylinder Series PNC, ISO 6431 and VDMA 24 562 Page 1 of11 Cylinder Series PNC, to ISO 6431 and VDMA 24 562 How to Order PNC ---------------- Ø ---------------------------- Stroke --------- S PNC: basic

More information

ACT-112. Series N Actuators 1-1/8" to 4" bore sizes. Actuators. Options selector

ACT-112. Series N Actuators 1-1/8 to 4 bore sizes. Actuators. Options selector ctuators Series ctuators Precision machined 00 Series stainless steel components. Cylinders rated to 50 PSI air, 400 PSI hydraulic (non-shock). Designed for non-lube service. Switches available on all

More information

MP/MR Series VDMA 24562 ISO 6431

MP/MR Series VDMA 24562 ISO 6431 MP/MR Series VDMA 24562 6431 PNEUMATIC PNEUMATIC MP/MR SERIES VDMA/ POWER General Page numbers General description and application benefits 3 Functional symbols 3 Model code 4 Preferred models - Basic

More information

Standard cylinders DSNU/DSNUP/DSN/ESNU/ESN, ISO 6432

Standard cylinders DSNU/DSNUP/DSN/ESNU/ESN, ISO 6432 Standard cylinders DSNU/DSNUP/DSN/ESNU/ESN, ISO 6432 Standard cylinders DSNU/DSNUP/DSN/ESNU/ESN, ISO 6432 Key features At a glance DIN ISO 6432 DIN ISO 6432 Round cylinders with piston diameters from 8

More information

1-3/4" Bore Air Cylinders

1-3/4 Bore Air Cylinders 1-3/4" Bore Air Ground and Polished, High Strength Carbon Steel Piston Rod Standard 303 Stainless Steel Rod Available as an Option Bronze Rod Guide Bushing Standard Force Exerted Approximately 2.4 of Air

More information

Max. particle size 5 µm. Pressure for determining piston forces. Materials:

Max. particle size 5 µm. Pressure for determining piston forces. Materials: Rodless cylinders Rodless cylinder Ports 10-32 UNF - 3/8 NPTF 16-80 mm double-acting with magnetic piston integrated guide Basic 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max.

More information

Hydraulic Cylinders Heavy-Duty Large Bore Tie Rod Type

Hydraulic Cylinders Heavy-Duty Large Bore Tie Rod Type Hydraulic Cylinders Heavy-Duty Large Bore Tie Rod Type Catalog Series VG Table of Contents Design Features...3 Model Code...4 How to Order...6 Mounting Style & Installation...7 Mounting Application Guide...7

More information

cylinders CONSTRUCTION CHARACTERISTICS Enlarged chromium-plated hollow guides provide robustness and reliability

cylinders CONSTRUCTION CHARACTERISTICS Enlarged chromium-plated hollow guides provide robustness and reliability Technical characteristics s for pneumatic cylinder suitable for: ISO 6431-64 cylinders M series K/KD series 0 s for rodless cylinders S1 series Short- cylinders W series 0 Compact cylinders STRONG RS series

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information

PCC TechTorq. Rack and Pinion Actuators. A PCC Flow Technologies Company. Double Acting & Spring Return

PCC TechTorq. Rack and Pinion Actuators. A PCC Flow Technologies Company. Double Acting & Spring Return PCC TechTorq A PCC Flow Technologies Company Rack and Pinion Actuators Double Acting & Spring Return FEATURES precision engineered pistons with 4 wear pads blowout proof, onepiece drive shaft standard

More information

AIR-AIR PRESSURE MULTIPLIER (BOOSTER)

AIR-AIR PRESSURE MULTIPLIER (BOOSTER) AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally

More information

Standard cylinders DNG/DNGZK/DNGZS, ISO 15552

Standard cylinders DNG/DNGZK/DNGZS, ISO 15552 Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO 15552 (corresponds

More information

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16" Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57

500 Hydraulic H-09 -DBZ H-09 -DUZ H-09 -DZ 1-1/16 Bore 500 Hydraulic Push Force =.886 x psi Pull Force =.776 x psi Front Block Mount Base Weight:.57 HEX-STUD made from heat treated alloy steel. In case of failure due to overload, the hexagon portion will remain in rod and can be easily removed Buna N rod wiper seal assures dry drip free piston rod

More information

Rotary actuators Rotary wing drives Series RAK. Brochure

Rotary actuators Rotary wing drives Series RAK. Brochure Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:

More information

Metric Hydraulic Cylinders. Series HMI

Metric Hydraulic Cylinders. Series HMI Metric Hydraulic Cylinders aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Catalog HY085/NA Parker As the world leader

More information

Mini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide

Mini slide, Series MSN narrow version Ø 6-16 mm double-acting with magnetic piston cushioning: elastic with integrated ball rail guide Piston rod cylinder uide cylinders ini slide, Series SN 1 Ambient temperature min./max. +0 C / +60 C edium Compressed air ax. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure

More information

List of Part Numbers Manufacturer's No. / Hella No.

List of Part Numbers Manufacturer's No. / Hella No. List of Part Numbers Manufacturer's No. / No. List of part numbers.02-.09 Manufacturer's no. / no..-.53 Note: The original numbers listed in the manufacturer number - number comparison serve exclusively

More information

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company

HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner

More information

Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data

Oil Dampers with Fixings on. Both Ends. Damping Engineering Oil Dampers with Fixings on Both Ends. Technical Data amping Engineering Oil ampers with Fixings on Both Ends Oil dampers with fixings on both ends are used when moving objects may not exceed a certain speed e.g. flaps, lids, lever arms. They are fixed at

More information

Air Cylinder Model Selection Procedures

Air Cylinder Model Selection Procedures Air Cylinder Model Selection Procedures Step Obtain the bore of the cylinder tube. Refer to Graphs and. qdetermine the load factor in accordance with the purpose. Purpose of operation Load factor η Series

More information

2H Hydraulic Cylinders. Heavy Duty NFPA Tie Rod Cylinders for Working Pressures up to 210 bar

2H Hydraulic Cylinders. Heavy Duty NFPA Tie Rod Cylinders for Working Pressures up to 210 bar H Hydraulic Cylinders Heavy Duty NPA for Working Pressures up to 0 bar Catalogue H07-0/U Mounting Styles H Series H Cylinder Mounting Styles The standard range of Parker H cylinders comprises 7 mounting

More information

FULL COLOR TAB #4 BTP, 3P, TM

FULL COLOR TAB #4 BTP, 3P, TM FULL COLOR TAB #4 BTP, 3P, TM 60 BACK-TO-BACK CYLINDERS: You can back-to-back any series of cylinder together mixed or matched, to provide unlimited design possibilities. Back-to-back cylinders consist

More information

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm

Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders

More information

Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8

Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8 * U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned

More information

Precision Manual Clamps

Precision Manual Clamps 5.4 Series 670, 675, 690, 695 Product Overview Features: Precision clamping for high production Adjustable collet-type bushing minimizes radial plunger movement Plunger has a flat surface for anti rotation

More information

RODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446

RODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446 RODESS AND CYINDERS WITH CARRIER RACKET-TYPE ST SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length of

More information

CYLINDERS OPTIONS ACCESSORIES

CYLINDERS OPTIONS ACCESSORIES CYLINDERS NFPA Interchangeable 1.50 thru 1 Bores 50 PSI Pneumatic Strokes to 10 Inches Permanent Lubrication Temperatures: 00 F Standard Double Acting Multi-Stage Multi-Position Triple Rod Flush Mount

More information

Victims Compensation Claim Status of All Pending Claims and Claims Decided Within the Last Three Years

Victims Compensation Claim Status of All Pending Claims and Claims Decided Within the Last Three Years Claim#:021914-174 Initials: J.T. Last4SSN: 6996 DOB: 5/3/1970 Crime Date: 4/30/2013 Status: Claim is currently under review. Decision expected within 7 days Claim#:041715-334 Initials: M.S. Last4SSN: 2957

More information

Commercial Shearing (Pty) Ltd P3-P11-P17

Commercial Shearing (Pty) Ltd P3-P11-P17 Commercial Shearing (Pty) Ltd P3-P11-P17 HYDRAULIC PUMPS P3 HYDRAULIC PUMPS Superior Performance. High Efficiency. High Pressure Operation. The Advantage At One Glance UP TO 4000 PSI/276 BAR CONTINUOUS

More information

Vacuum Gate Valve DN 100 and DN 150

Vacuum Gate Valve DN 100 and DN 150 Vacuum Gate Valve DN 100 and DN 150 WER Dok.E.02.050_02.051 1. Introduction/Safety Instructions 2. Description 3. Technical Data 4. Installation 5. Operation 6. Maintenance Instructions 7. Spare Parts

More information

Pneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US

Pneumatic Grippers Parallel and Angular Grippers. Catalog 1900-2/US Pneumatic Grippers Parallel and Angular Grippers Catalog 19-2/US Catalog 19-2/US OContents GPR Series Rotary vane driven design GPR GPCR Series P5G-HPM(C) Series P5G-HP Series GPT Series P5G-AP Series

More information

Flat Cylinders Flat-I Square Flat-I 2.3-2.11 2.12-2.18 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories EF1 Cylinders EF2 Cylinders EFP and

More information

Introduction. Hyva Hydraulic Kits

Introduction. Hyva Hydraulic Kits Hyva Hydraulic Kits Introduction Hyva Hydraulic Kits The listed components joined together will form ideal kits to drive hydraulic equipment on your commercial vehicle. The following kits are composed

More information

TD series. TD series Dual rod cylinder Ø6 ~ Ø40 P Dual rod cylinder. TD Dual Rod Cylinder. TDX Dual Rod Cylinder. TDXU Dual Rod Cylinder

TD series. TD series Dual rod cylinder Ø6 ~ Ø40 P Dual rod cylinder. TD Dual Rod Cylinder. TDX Dual Rod Cylinder. TDXU Dual Rod Cylinder TD series Dual rod cylinder TD series rovide CD external dimension. TD TDX TDXU STU STM STX TD series Dual rod cylinder Ø6 ~ Ø0.3-8.1 Dual rod cylinder, double force, rods made of hard chrome shaft with

More information

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?

More information

Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP

Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational

More information

NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove

NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring

More information

T43002 T46002 T412002

T43002 T46002 T412002 JACK STAND 2001 2002 Model TL2003-1 TL2003-4 Capacity 3 Ton 6 Ton 285 395 TL2003-1 Max. Height 425 605 5 9.7 TL2003-4 JACK STAND T43002 T46002 T412002 2003 2004 2005 Model T43002 T46002 T412002 Capacity

More information

Compact Cylinder Single Acting, Single Rod. How to Order /2" Cylinder stroke (in)

Compact Cylinder Single Acting, Single Rod. How to Order /2 Cylinder stroke (in) ompact ylinder Single cting, Single Rod Series N8 size: 056 (9/16 ), 075 (/ ), 106 (1-1/16 ), 150 (1-1/ ), 00 ( ), 50 (-1/ ) ithout auto switch ith auto switch B M N Built-in magnet pplicable uto Switches

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc. CONTROLS A Division of BRAY INTERNATIONAL, Inc. Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 06/20/2014 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation

More information

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg 21 Series 0.3 hp 0.22 kw 0.2 15.2 ft. lbs. 0.27 20.6 Nm Non-Reversible Rear Exhaust 21M1340-40 Spindle Rotation All models are right-hand rotation. To order left-hand rotation models (not reversible) substitute

More information

Fluid Power Hydro-Line Cylinders IHM Series Cylinders. ISO 6020-2 Interchangeable

Fluid Power Hydro-Line Cylinders IHM Series Cylinders. ISO 6020-2 Interchangeable Fluid Power Hydro-Line Cylinders IHM Series Cylinders ISO 6020-2 Interchangeable The Power of One Eaton HANSEN GROMELLE There s a certain energy at Eaton. It s the power of integrating the competencies

More information

PROFILE SYSTEM PROFILE VA PROFILE SYSTEM VA MINITEC PROFILE SYSTEM

PROFILE SYSTEM PROFILE VA PROFILE SYSTEM VA MINITEC PROFILE SYSTEM PROFILE SYSTEM PROFILE VA AV el i f or P PROFILE SYSTEM VA MINITEC PROFILE SYSTEM 243 PROFILE SYSTEM PROFILE VA PROFILE SYSTEM VA The new profile-generation Many new applications are possible with the

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive

More information

kymanual or Automatic - it s your Choice

kymanual or Automatic - it s your Choice . kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.

More information

890 SERIES. Tork-Mate Pneumatic Actuators. Up to 15 Million Cycles. Heavy Duty Rack and Pinion Extended Life...

890 SERIES. Tork-Mate Pneumatic Actuators. Up to 15 Million Cycles. Heavy Duty Rack and Pinion Extended Life... Tork-Mate Pneumatic Actuators 890 SERIES Heavy Duty Rack and Pinion Extended Life... Up to 15 Million Cycles Design Features 1. Piston Aluminum alloy, designed for the most demanding applications. 2. Piston

More information

FULL COLOR TAB #3 FM 25

FULL COLOR TAB #3 FM 25 FULL COLOR TAB #3 FM 25 FM - How to Order SERIES FM : Benefits Same construction as TA series with the added benefit of sleeve nut construction. Four tapped holes in Head and Cap-Standard. Optional four

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

BULLETIN 74.00-2 DECEMBER 2011. DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS

BULLETIN 74.00-2 DECEMBER 2011. DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS BULLETIN 74.00-2 DECEMBER 2011 DeZURIK POWERRAC CYLINDER ACTUATORS TECHNICAL SPECIFICATIONS Materials of Construction B21 R1A & R2A B9D B9E B9G B9H B9F B15 B14 B11 B10 B12 B13 B9C B7 B9A B6 B5 B9B B8 B22

More information

Accessories for Differential Pressure and Flow Regulators

Accessories for Differential Pressure and Flow Regulators Self-operated Regulators Accessories for Differential Pressure and Flow Regulators Compression fittings Needle valves Condensation chamber Orifice plates Welding neck flanges Control lines Application

More information

3 Way Proportional Pressure Control Valve Nominal diameter 2 Direct operated poppet valves Flange design Low hysteresis

3 Way Proportional Pressure Control Valve Nominal diameter 2 Direct operated poppet valves Flange design Low hysteresis VP0 Way Proportional Pressure Control Valve Nominal diameter Direct operated poppet valves Flange design Low hysteresis Good repeatability High flow capacity at exhaust port Manifold mountable system Compact

More information

Compact cylinders ADN/AEN, to ISO 21287

Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap

More information

Standard cylinders DSBC, to ISO 15552

Standard cylinders DSBC, to ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E49003.1 and UNI 10290) Double-acting For contactless

More information

Parker Series 2A Air Cylinder

Parker Series 2A Air Cylinder Parker Series ir ylinder hen the job calls for reliable, heavy-duty performance, specify Series. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with

More information

NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Parallel gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove

NOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Parallel gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove NOMENCLATURE RPP -A - 100-1 / GA / V RÖHM Parallel gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 50-380 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: Spring safety

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK Bosch Rexroth Corporation Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion Systems Basic Mechanical

More information

4/2-Way Pneumatic Solenoid Valve

4/2-Way Pneumatic Solenoid Valve 4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug

More information

LCG Series. Specifications. Stroke length. Linear slide cylinder Double acting single rod type. Bore size: 6, 8, 12, 16, 20, 25.

LCG Series. Specifications. Stroke length. Linear slide cylinder Double acting single rod type. Bore size: 6, 8, 12, 16, 20, 25. Linear slide cylinder Double acting single rod type Bore size: 6, 8, 2, 6, 20, 25 JIS symbol Specifications Descriptions LCG Bore size mm 6 8 2 6 20 25 Actuation Working fluid Double acting Compressed

More information

APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module.

APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS. This work covers part of outcome 2 of the standard Edexcel module. APPLIED PNEUMATICS AND HYDRAULICS H TUTORIAL HYDRAULIC AND PNEUMATIC CYLINDERS This work covers part of outcome 2 of the standard Edexcel module. The material needed for outcome 2 is very extensive so

More information

POSI 1 GG-40 POSI 1 GG-150 POSI 1 GG-300. POSI 2 PosiControl PosiControl4

POSI 1 GG-40 POSI 1 GG-150 POSI 1 GG-300. POSI 2 PosiControl PosiControl4 POSI 1 GG-40 POSI 1 GG-150 POSI 1 GG-300 POSI 2 PosiControl PosiControl4 HANDLING SYSTEMS POSI 1 Handling stand GG series Base out of aluminium die casting, rods out of stainless steel. Ears for the cable

More information

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread

FITTINGS 5-01. 82A series Aluminium (light weight) compression fittings Ø 6... 42 mm tube size, BSPP and BSPT thread FITTINS 82 series luminium (light weight) compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 82 series rass compression fittings Ø 6... 42 mm tube size, SPP and SPT thread 83 series luminium

More information

Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.

Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston. SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary

More information

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls

Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls www.atos.com Table A609/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,

More information

KEYSTONE. Operating and Maintenance Instructions for: Figure 79 Pneumatic Actuators (U/E options)

KEYSTONE. Operating and Maintenance Instructions for: Figure 79 Pneumatic Actuators (U/E options) KEYSTONE for: Figure 79 Pneumatic Actuators (U/E options) Introduction The Keystone Figure 79 Pneumatic Actuator range is available in three mounting options, as follows:- 79U - Keystone Mounting Standard

More information