Item No. Name of Part Item No. Name of Part 1 * 2 * 8 9 * 13 * 14 * * * 73 73D * 80
|
|
- Gervais Copeland
- 7 years ago
- Views:
Transcription
1 Assembly Parts Types G, GT, GL, K, KH Unipumps, Close Coupled pump motors with Mechanical Seal - Bulletin Packing with Lantern Ring Item No. Name of Part Item No. Name of Part 1 * 2 * 8 9 * 13 * A * 25 * 26 * 28 Casing Impeller Impeller Ring (Not Shown) Suction Cover Packing Shaft Sleeve Stuffi ng Box Gland Seal Cap Suction Cover Ring Impeller Screw Impeller Screw Washer 29 * * * 73 73D * 80 Furnished only in Pairs as complete units * For domestic service we recommend these parts be carried in stock as spares NOTE: All pumps have a maximum working pressure PSIG * Recommended Spare Parts Lantern Ring Impeller Key Defl ector (Liquid) Stuffi ng Box Bushing Mechanical Shaft Seal (Stationary Element) Seal Sleeve Casing Gasket Seal Cap Gasket Mechanical Shaft Seal (Rotating Element) 15 10/12
2 Bulletin Split Cases End Suctions Key Description (310) Shaft Group 1 Only 1 Key on BOM (310) Shaft Group 2 Only 1 Key on BOM (500) 2BA-67 Only 1 Key on BOM (500) 4BA-67 Only 1 Key on BOM Impeller Key p/n 1SC Q21-25-J8 KEY,.25 x.25 x 3.03", 303SS 2SC Q21-23-J8 KEY,.31 x.31 x 3.53", 303SS 3SC Q21-22-J8 KEY,.31 x.31 x 3.65", 303SS 4SC Q21-37-J8 KEY,.50 x.50 x 5.13", 303SS 5SC Q21-52-J8 KEY,.50 x.50 x 6.69", 303SS 6SC Q21-47-J8 KEY,.50 x.50 x 4.75", 303SS 16 2/09
3 Bulletin Shaft Group 1 1G 1.5G Quantity 2 Impeller B12/A2 B70-13-B12/A Suction Cover Ring A6470-C9/A2 A6808-C9/A2 1 - Double Wear Rings A6604-C9/A2 & A6605-C9/A2 A7019-C9/A2 & A7020-C9/A2 1 each 2 Impeller N/A B12A Suction Cover Ring N/A N/A 1 - Double Wear Rings N/A A6808-C9/A2 & A7251-C9/A2 1 each 1 Casing - 125# 1G G-125 Casing C A2 C A Case Gasket - 125# A6345-L13 A6345-L Suction Cover - 125# C A2 C7014-A2 1 1 Casing - 250# 1G-250D 1.5G-250D Casing C A12 C A Case Gasket - 250# A7444-L13 A7444-L Suction Cover - 250# C A12 C A Shaft Sleeve A5204-C9/J4 A5204-C9/J Impeller Screw Q60-2-J3 Q60-2-J Impeller Screw Washer A5090-J3 A5090-J Impeller Key Q21-4-J8 Q21-4-J Adapter - JP Frame C5522-A2 C5522-A Adapter - TCZ Frame C5523-A2 C5523-A Packing Q27-60-M2 Q27-60-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-12-C2/E26 Q17-12-C2/E Lantern Ring (Seal Cage) A5086-V2 A5086-V Stuffi ng Box Bushing A7492-J2 A7492-J & 80 Mechanical Seal - STD Q Y34 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8493-C9/J2/J10 A8493-C9/J2/J10 1 BALANCED 14 Shaft Sleeve A5782-C9/J2/J4 A5782-C9/J2/J Step Shaft Sleeve A7443-C9 A7443-C & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-32-K9 Q41-32-K Impeller Key A7356-J8 A7356-J8 1 17
4 Bulletin Shaft Group 1 1.5GT 1.5K Quantity 2 Impeller B7233-B12/A2 C6390-B12/A Suction Cover Ring A6809-C9/A2 A6809-C9/E4 1 - Double Wear Rings N/A A6610-C9/A2 & A6611-C9/A2 1 each 2 Impeller N/A C8457-B12/A Suction Cover Ring N/A A7277-C9/A2 1 - Double Wear Rings N/A A6409-C9/E4 & A7921-C9/A2 1 each 1 Casing - 125# 1.5GT K-125 Casing C A2 C A Case Gasket - 125# A6345-L13 A6346-L Suction Cover - 125# C7234-A2 B6391-A2 1 1 Casing - 250# 1.5GT-250D 1.5K-250D Casing C A12 C A Case Gasket - 250# A7444-L13 A7771-L Suction Cover - 250# C A12 B A Shaft Sleeve A5204-C9/J4 A5204-C9/J Impeller Screw Q60-2-J3 Q60-2-J Impeller Screw Washer A5090-J3 A5090-J Impeller Key Q21-4-J8 Q21-4-J Adapter - JP Frame C5522-A2 C5522-A Adapter - TCZ Frame C5523-A2 C5523-A Packing Q27-60-M2 Q27-60-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-12-C2/E26 Q17-12-C2/E Lantern Ring (Seal Cage) A5086-V2 A5086-V Stuffi ng Box Bushing A7492-J2 A7492-J & 80 Mechanical Seal - STD Q Y34 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8493-C9/J2/J10 A8493-C9/J2/J10 1 BALANCED 14 Shaft Sleeve A5782-C9/J2/J4 A5782-C9/J2/J Step Shaft Sleeve A7443-C9 A7443-C & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-32-K9 Q41-32-K Impeller Key A7356-J8 A7356-J8 1 18
5 Bulletin Shaft Group 1 1.5KH 2G Quantity 2 Impeller C6099-B12/A B12/A Suction Cover Ring A6409-C9/A2 A6409-C9/A2 1 - Double Wear Rings A6610-C9/? & A6611-C9/? A6610-C9/? & A6611-C9/? 1 each 1 Casing - 125# 1.5KH-125 2G-125 Casing C A2 C A Case Gasket - 125# A6083-L13 A6345-L Suction Cover - 125# B A2 C A2 1 1 Casing - 250# 1.5KH-250D 2G-250D Casing C A12 C A Case Gasket - 250# A7777-L13 A7444-L Suction Cover - 250# B A12 C A Shaft Sleeve A5204-C9/J4 A5204-C9/J Impeller Screw Q60-2-J3 Q60-2-J Impeller Screw Washer A5090-J3 A5090-J Impeller Key Q21-4-J8 Q21-4-J Adapter - JP Frame C5522-A2 C5522-A Adapter - TCZ Frame C5523-A2 C5523-A Packing Q27-60-M2 Q27-60-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-12-C2/E26 Q17-12-C2/E Lantern Ring (Seal Cage) A5086-V2 A5086-V Stuffi ng Box Bushing A7492-J2 A7492-J & 80 Mechanical Seal - STD Q Y34 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8493-C9/J2/J10 A8493-C9/J2/J10 1 BALANCED 14 Shaft Sleeve A5782-C9/J2/J4 A5782-C9/J2/J Step Shaft Sleeve A7443-C9 A7443-C & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-32-K9 Q41-32-K Impeller Key A7356-J8 A7356-J8 1 19
6 Bulletin Shaft Group 1 2K 2.5G Quantity 2 Impeller B12/A B12/A Suction Cover Ring A6430-C9/A2 A6808-C9/A2 1 - Double Wear Rings A6612-C9/A2 & A7915-C9/A2 A7019-C9/A2 & A7020-C9/A2 1 each 1 Casing - 125# 2K G-125 Casing C A2 C A Case Gasket - 125# A6346-L13 A6345-L Suction Cover - 125# C A A2 1 1 Casing - 250# 2K-250D 2.5G-250D Casing C A12 C A Case Gasket - 250# A7771-L13 A7444-L Suction Cover - 250# C A12 B A Shaft Sleeve A5204-C9/J4 A5204-C9/J Impeller Screw Q60-2-J3 Q60-2-J Impeller Screw Washer A5090-J3 A5090-J Impeller Key Q21-4-J8 Q21-4-J Adapter - JP Frame C5522-A2 C5522-A Adapter - TCZ Frame C5523-A2 C5523-A Packing Q27-60-M2 Q27-60-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-12-C2/E26 Q17-12-C2/E Lantern Ring (Seal Cage) A5086-V2 A5086-V Stuffi ng Box Bushing A7492-J2 A7492-J & 80 Mechanical Seal - STD Q Y34 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8493-C9/J2/J10 A8493-C9/J2/J10 1 BALANCED 14 Shaft Sleeve A5782-C9/J2/J4 A5782-C9/J2/J Step Shaft Sleeve A7443-C9 A7443-C & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-32-K9 Q41-32-K Impeller Key A7356-J8 A7356-J8 1 20
7 Bulletin Shaft Group 1 2.5K 3G Quantity 2 Impeller B12/A B12/A Suction Cover Ring A6808-C9/A2 A6809-C9/A2 1 - Double Wear Rings A7019-C9/A2 & A7020-C9/A2 A5577-C9/A2 & H C9/A2 1 each 1 Casing - 125# 2.5K-125 3G-125 Casing C A2 C A Case Gasket - 125# A6346-L13 A6345-L Suction Cover - 125# A2 B A2 1 1 Casing - 250# 2.5K-250D 3G-250D Casing C A12 C A Case Gasket - 250# A7771-L13 A7444-L Suction Cover - 250# A12 B A Shaft Sleeve A5204-C9/J4 A5204-C9/J Impeller Screw Q60-2-J3 Q60-2-J Impeller Screw Washer A5090-J3 A5090-J Impeller Key Q21-4-J8 Q21-4-J Adapter - JP Frame C5522-A2 C5522-A Adapter - TCZ Frame C5523-A2 C5523-A Packing Q27-60-M2 Q27-60-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-12-C2/E26 Q17-12-C2/E Lantern Ring (Seal Cage) A5086-V2 A5086-V Stuffi ng Box Bushing A7492-J2 A7492-J & 80 Mechanical Seal - STD Q Y34 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8493-C9/J2/J10 A8493-C9/J2/J10 1 BALANCED 14 Shaft Sleeve A5782-C9/J2/J4 A5782-C9/J2/J Step Shaft Sleeve A7443-C9 A7443-C & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-32-K9 Q41-32-K Impeller Key A7356-J8 A7356-J8 1 21
8 Bulletin Shaft Group 1 3K 4G Quantity 2 Impeller B B12/A2 C5508-B12A Suction Cover Ring A6623-C9/A2 A6810-C9/A2 1 - Double Wear Rings A6145-C9/A2 & A6146-C9/A2 H C9/A2 & H C9/A2 1 each 2 Impeller B B12/A2 B B12/A Suction Cover Ring A6623-C9/A2 H484-1-C9/A2 1 - Double Wear Rings A6145-C9/A2 & A6146-C9/A2 A6810-C9/A2 & A7592-C9/A2 1 each 1 Casing - 125# 3K-125 4G-125 Casing C A12 C A Case Gasket - 125# A6346-L13 A6345-L Suction Cover - 125# A2 C A2 1 1 Casing - 250# 3K-250D 4G-250D Casing C A12 C A Case Gasket - 250# A7771-L13 A7444-L Suction Cover - 250# C A12 C A Shaft Sleeve A5204-C9/J4 A5204-C9/J Impeller Screw Q60-2-J3 Q60-2-J Impeller Screw Washer A5090-J3 A5090-J Impeller Key Q21-4-J8 Q21-4-J Adapter - JP Frame C5522-A2 C5522-A Adapter - TCZ Frame C5523-A2 C5523-A Packing Q27-60-M2 Q27-60-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-12-C2/E26 Q17-12-C2/E Lantern Ring (Seal Cage) A5086-V2 A5086-V Stuffi ng Box Bushing A7492-J2 A7492-J & 80 Mechanical Seal - STD Q Y34 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8493-C9/J2/J10 A8493-C9/J2/J10 1 BALANCED 14 Shaft Sleeve A5782-C9/J2/J4 A5782-C9/J2/J Step Shaft Sleeve A7443-C9 A7443-C & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-32-K9 Q41-32-K Impeller Key A7356-J8 A7356-J8 1 22
9 Bulletin Shaft Group 1 4GL Quantity 2 Impeller H B12/A Suction Cover Ring H484-1-C9/A2 1 - Double Wear Rings A6810-C9/A2 & A7592-C9/A2 1 each 1 Casing - 125# 4GL-125 Casing C A2 1 Plugs Case Gasket - 125# A6345-L Suction Cover - 125# C A2 1 1 Casing - 250# 4GL-250D Casing C A12 1 Plugs Case Gasket - 250# A7444-L Suction Cover - 250# C A Shaft Sleeve A5204-C9/J Impeller Screw Q60-2-J Impeller Screw Washer A5090-J Impeller Key Q21-4-J Adapter - JP Frame C5522-A Adapter - TCZ Frame C5523-A2 0 - Tubing - Black Impolene Q30-6-V6TF 1 - Vent Cock Q24-1-C2/E Packing Q27-60-M Stuffi ng Box Gland A B5/A Gland Stud Q17-12-C2/E Gland Nut Q18-8-C2/J Gland Washer Q20-3-E Lantern Ring (Seal Cage) A5086-V Stuffi ng Box Bushing A7492-J2 1 - Male Elbow -.25 x.25 Q30-11-C2/E4 2 17A Seal Cap A A2 1 73D Seal Cap Gasket A7424-L & 80 Mechanical Seal - STD Q Y & 80 Mechanical Seal - Hot Water Q Y Seal Sleeve (Spacer) A8493-C9/J2/J Male Elbow -.25 x.25 Q30-11-C2/E4 1 - Male Elbow x.25 Q30-16-C2/E4 1 BALANCED 14 Shaft Sleeve A5782-C9/J2/J Step Shaft Sleeve A7443-C9 1 17A Seal Cap A A2 1 73D Seal Cap Gasket A7424-L & 80 Balanced Mech. Seal - STD Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y Step Sleeve O-ring Q41-32-K9 1 - Tubing - Copper Q30-6-C6TF 1 - Tubing Steel (All Iron Pump) Q30-6-E6 12" 32 Impeller Key A7356-J8 1 - Male Elbow -.25 x.25 Q30-11-C2/E4 1 - Male Elbow x.25 Q30-16-C2/E4 1 23
10 Bulletin Shaft Group 2 1.5K 1.5KH Quantity 2 Impeller B B12/A2 C B12/A Suction Cover Ring A6409-C9/A2 A6409-C9/A2 1 - Double Wear Rings A6610-C9/A2 & A6611-C9/A2 A6610-C9/A2 & A6611-C9/A2 1 each 2 Impeller C B12/A2 N/A 1 25 Suction Cover Ring C B12/A2 N/A 1 - Double Wear Rings A7277-C9/A2 N/A 1 each 1 Casing - 125# 1.5K KH Casing C A2 C A Case Gasket - 125# A6346-L13 A6083-L Suction Cover - 125# B6391-A2 B A2 1 1 Casing - 250# 1.5K-250D-2 1.5KH-250D-2 Casing C A12 C A Case Gasket - 250# A7771-L13 A7777-L Suction Cover - 250# B A12 B A Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 24
11 Bulletin Shaft Group 2 2K 2.5G Quantity 2 Impeller B B12/A2 C B12/A Suction Cover Ring A6430-C9/A2 A6808-C9/A2 1 - Double Wear Rings A6612-C9/A2 & A7915-C9/A2 A7019-C9/A2 & A7020-C9/A2 1 each 1 Casing - 125# 2KL G Casing C A2 C A Case Gasket - 125# A6346-L13 A6345-L Suction Cover - 125# C A2 B A Casing - 250# 2K-250D-2 2.5G-250D-2 Casing C A12 C A Case Gasket - 250# A7771-L13 A7444-L Suction Cover - 250# C A12 B A Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J4 1 BALANCED 14 Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 25
12 Bulletin Shaft Group 2 2.5K 2.5KH Quantity 2 Impeller B B12/A2 B4846-B12/A Suction Cover Ring A6808-C9/A2 A6623-C9/A2 1 - Double Wear Rings A7019-C9/A2 & A7020-C9/A2 A5328-C9/A2 & A6811-C9/A2 1 each 2 Impeller N/A B4586-B12/A Suction Cover Ring N/A A6623-C9/A2 1 - Double Wear Rings N/A A5328-C9/A2 & A6811-C9/A2 1 each 1 Casing - 125# 2.5K KH Casing C A2 C A Case Gasket - 125# A6346-L13 A6083-L Suction Cover - 125# A A2 1 1 Casing - 250# 2.5K-250D-2 2.5KH-250D-2 Casing C A12 C A Case Gasket - 250# A7771-L13 A7777-L Suction Cover - 250# A12 B A Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 26
13 Bulletin Shaft Group 2 3G 3K Quantity 2 Impeller B B12/A2 B B12/A Suction Cover Ring A6809-C9/A2 A6623-C9/A2 1 - Double Wear Rings A5577-C9/A2 & H C9/A2 A6145-C9/A2 & A6146-C9/A2 1 each 2 Impeller N/A B B12/A Suction Cover Ring N/A A6623-C9/A2 1 - Double Wear Rings N/A A6145-C9/A2 & C6146-C9/A2 1 each 1 Casing - 125# 3G K Casing C A2 C A Case Gasket - 125# A6345-L13 A6346-L Suction Cover - 125# B A A Casing - 250# 3G-250D-2 3K-250D-2 Casing C A12 C A Case Gasket - 250# A7444-L13 A7771-L Suction Cover - 250# B A12 C A Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 27
14 Bulletin Shaft Group 2 3KH 4G Quantity 2 Impeller B B12/A2 B B12/A Suction Cover Ring A6812-C9/A2 H484H-1-C9/A2 1 - Double Wear Rings A6811-C9/A2 & A8048-C9/A2 A6810-C9/A2 & A7592-C9/A2 1 each 2 Impeller B B12/A2 C B12/A Suction Cover Ring A6811-C9/A2 A6810-C9/A2 1 - Double Wear Rings N/A H C9/A2 & H C9/A2 1 each 1 Casing - 125# 3KH G Casing C A2 C A Case Gasket - 125# A6083-L13 A6345-L Suction Cover - 125# A2 C A2 1 1 Casing - 250# 3KH-250D-2 4G-250D-2 Casing C A12 C A Case Gasket - 250# A7777-L13 A7444-L Suction Cover - 250# C A12 C A Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 28
15 Bulletin Shaft Group 2 4GL 4K Quantity 2 Impeller B B12/A2 B B12/A Suction Cover Ring H484-1-C9/A2 A6810-C9/A2 1 - Double Wear Rings A6810-C9/A2 & A7592-C9/A2 H C9/A2 & H C9/A2 1 each 1 Casing - 125# 4GL K Casing C A2 C A Case Gasket - 125# A6345-L13 A6083-L Suction Cover - 125# C A A2 1 1 Casing - 250# 4GL-250D-2 4K-250D-2 Casing C A12 C A Case Gasket - 250# A7444-L13 A7777-L Suction Cover - 250# C A12 C A Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 29
16 Bulletin Shaft Group 2 4KL 4KS Quantity 2 Impeller C5412-B12/A2 C B12/A Suction Cover Ring H C9/A2 A6810-C9/A2 1 - Double Wear Rings A6595-C9/A2 & A6596-C9/A2 H C9/A2 & H C9/A2 1 each 1 Casing - 125# 4KL KS Casing C A2 C A Case Gasket - 125# A6346-L13 A6007-L Suction Cover - 125# B5531-A2 C A2 1 1 Casing - 250# 4KL-250D-2 4KS-250D-2 Casing C A12 C A Case Gasket - 250# A7771-L13 A L Suction Cover - 250# B A12 C A Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 30
17 Bulletin Shaft Group 2 5G 6G Quantity 2 Impeller 4378-B12/A B12/A Suction Cover Ring H C9/A2 H C9/A2 1 - Double Wear Rings A6595-C9/A2 & C6596-C9/A2 A6442-C9/A2 & A6443-C9/A2 1 each 1 Casing - 125# 5G G Casing C A2 C A12 1 Plugs Case Gasket - 125# A6082-L13 A6346-L Suction Cover - 125# H A A2 1 1 Casing - 250# 5G-250D-2 6G-250D-2 Casing N/A N/A 1 Plugs N/A 6 73 Case Gasket - 250# A8287-L13 N/A 1 9 Suction Cover - 250# B A12 N/A 1 14 Shaft Sleeve H C9/J2/J4 H C9/J2/J Impeller Screw Q60-3-J3 Q60-3-J Impeller Screw Washer A6680-J3 A6680-J Impeller Key Q21-5-J8 Q21-5-J Adapter - JP Frame C A2 C A Adapter - TCZ Frame C6679-A2 C6679-A Packing Q27-62-M2 Q27-62-M Stuffi ng Box Gland A B5/A2 A B5/A Gland Stud Q17-70-C2/E26 Q17-70-C2/E Lantern Ring (Seal Cage) A5350-V2 A5350-V Stuffi ng Box Bushing A6759-J2 A6759-J2 1 17A Seal Cap B8419-A2 B8419-A2 1 73D Seal Cap Gasket A6500-L13 A6500-L & 80 Mechanical Seal - STD Q Y35 Q Y & 80 Mechanical Seal - Hot Water Q Y6 Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 A8494-C9/J2/J Step Shaft Sleeve A7460-C9/J2/J4 A7460-C9/J2/J4 1 17A Seal Cap B A2 B A2 1 73D Seal Cap Gasket A6500L13 A6500-L & 80 Balanced Mech. Seal - STD Q Y34 Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y17 Q Y Step Sleeve O-ring Q41-34-K9 Q41-34-K Impeller Key Q21-63-J8 Q21-63-J8 1 31
18 Bulletin Shaft Group 2 6K Quantity 2 Impeller D325811P01-B12/A Suction Cover Ring H C9/A2 1 - Double Wear Rings A5849-C9/A2 & A5850-C9/A2 1 each 1 Casing - 125# 6K Casing C A12 1 Plugs Case Gasket - 125# A6083-L Suction Cover - 125# A2 1 1 Casing - 250# 6K-250D-2 Casing C A12 1 Plugs Case Gasket - 250# A7777-L Suction Cover - 250# C A Shaft Sleeve H C9/J2/J Impeller Screw Q60-3-J Impeller Screw Washer A6680-J Impeller Key Q21-5-J Adapter - JP Frame C A Adapter - TCZ Frame C6679-A2 0 - Tubing - Black Impolene Q30-6-V6TF 1 - Vent Cock Q24-1-C2/E Packing Q27-62-M Stuffi ng Box Gland A B5/A Gland Stud Q17-70-C2/E Gland Nut Q18-8-C2/J Gland Washer Q20-3-E Lantern Ring (Seal Cage) A5350-V Stuffi ng Box Bushing A6759-J2 1 - Male Elbow -.25 x.25 Q30-11-C2/E4 2 17A Seal Cap B8419-A2 1 73D Seal Cap Gasket A6500-L & 80 Mechanical Seal - STD Q Y & 80 Mechanical Seal - Hot Water Q Y Seal Sleeve (Spacer) A8494-C9/J2/J4 1 - Male Elbow -.25 x.25 Q30-11-C2/E Step Shaft Sleeve A7460-C9/J2/J4 1 17A Seal Cap B A2 1 73D Seal Cap Gasket A6500L & 80 Balanced Mech. Seal - STD Q Y & 80 Balanced Mech. Seal - Tung. Car. Q Y Step Sleeve O-ring Q41-34-K9 1 - Tubing - Copper Q30-6-C6TF 1 - Tubing Steel (All Iron Pump) Q30-6-E6 12" 32 Impeller Key Q21-63-J8 1 - Male Elbow -.25 x.25 Q30-11-C2/E4 1 32
Item No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More information10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
More informationPARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR
Ingersoll-Rand Company 800-B Beaty Street P. O. Box 1803 Davidson, NC 28036 1-800-AIR-SERV (1-800-247-7378) www.air.ingersoll-rand.com PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR Ingersoll-Rand
More informationSIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS 426 2.98 12.06
SIGMA PUMPY HRANICE CENTRIFUGAL MULTISTAGE HORIZONTAL PUMPS LV SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz
More informationBell & Gossett Parts List DHP-650-PL. Replacement Parts for Hoffman Series VBF & Hoffman Series HBF. Boiler Feed Units
Bell & Gossett Parts List DHP-650-PL Replacement Parts for Hoffman Series VBF & Hoffman Series HBF Boiler Feed Units SERIES VBF & HBF Index How to use this Parts List...Page 3 30 VBF (Part number 161024
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationIF IT FLOWS THE BOWIE PUMP CAN PUMP IT
IF IT FLOWS THE BOWIE PUMP CAN PUMP IT Bowie Industries, Inc. Bowie, TX 76230 USA Page 1 Bowie Pumps Manual General Pump Information..Page 2 300 Series Pumps.. Page 5 400 Series Pumps.Page 11 500 Series
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationPump Shaft Sleeves - Stratford Engineering
Pump shafts are usually protected from erosion, corrosion, and wear at seal chambers, leakage joints, internal bearings, and in the waterways by renewable sleeves. The most common shaft sleeve function
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationWorld Bridge Replacement Parts for EMD 567 and 645 Diesel Engines
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationCDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationMULTISTAGE CENTRIFUGAL PUMPS
MULTISTAGE CENTRIFUGAL PUMPS MULTISTAGE CENTRIFUGAL PUMPS TK - TKR - VTK - TKK series TK-VTK-TKR-TKK are high pressure multistage pumps. Connection to the driving machine (generally an electrical motor)
More informationHow To Maintain A Gardner Dianner Pump
GARDNER DENVER 3-1-541 Rev D April, 2005 HD-2250 WELL SERVICE PUMP POWER END PARTS LIST ECN 1025185 MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES Gardner
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationSeries 1510 Centrifugal Pumps Technical Bulletin. Bulletin B-207G Bell & Gossett
Bulletin B-7G Bell & Gossett Series 1 Centrifugal Pumps Technical Bulletin For hydronic heating and cooling systems, industrial, pressure boosting and general pumping applications High efficiency, low
More informationIN series. Centrifugal pumps standardized to DIN-24255
IN series Centrifugal pumps standardized to DIN-24255 DESCRIPTION The new standardized IN series are single-stage horizontal centrifugal pumps, with axial suction and radial discharge, buit to Standard
More informationMDT5N25 & MTD5N40 SERVICE PARTS
MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts
More informationTwo Stage Water Ring Vacuum Pump VWS II Series
Two Stage Water Ring Vacuum Pump VWS II Series PPIS ISO 9001: 2008 CERTIFIED COMPANY Thank you for purchasing the PPI WATER RING VACUUM PUMP Before using the pump, please read the operating instructions
More information300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS
Section: MOYNO 500 PUMPS Page: 1 of 8 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 300 SERIES 331, 332, 333, 344, 356 AND 367 MODELS Mechanical Seal Models Packing Gland Models MODELS DESIGN FEATURES
More informationSINGLE STAGE INLINE FIRE PUMP
MODEL 383 SINGLE STAGE INLINE FIRE PUMP INSTRUCTION AND REPAIR MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains
More informationDISASSEMBLY & ASSEMBLY INSTRUCTIONS MULTISTAGE CENTRIFUGAL PUMPS TMA
DISASSEMBLY & ASSEMBLY INSTRUCTIONS MULTISTAGE CENTRIFUGAL PUMPS TMA INTRODUCTION These instructions are for the maintenance personnel for maintenance and/or repair of the indicated pump series. Disassembly
More informationInstructions for Using Current Production Parts List for Small Pump Drives
Amarillo Instructions for Using Current Production Parts List for Small Pump Drives 1. These parts lists are for current production models from the model to the model 350. Contact Amarillo for prices.
More informationRexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD
: R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE
More informationCajon VCR Fittings. Flanges, Fittings, & Components. Cajon & Swagelok Fittings. Cajon VCR Fittings. Nuts, Caps, & Plugs. Socket Weld Glands
Cajon VCR Fittings Cajon VCR Fittings Make excellent low-pressure gas connections Ideal for lecture bottle gas cylinders, standard helium checks, and general gas plumbing Withstand bakeout to 58º C (with
More informationJOB or CUSTOMER: ENGINEER: CONTRACTOR: SUBMITTED BY: SPECIFICATION REF: QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS.
Redi-Flo2, 2 Environmental Submersible Pumps MP1 Submittal Data QUANTITY TAG NO. MODEL NO. GPM FEET LEAD LENGTH COMMENTS Technical Data Motor Type: Water-Filled, variable speed submersible Maximum Fluid
More informationPARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin
More informationINSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS
INSTRUCTIONS AND PARTS LIST FOR MODEL 70H & 75H HAND-OPERATED HYDRAULIC PRESS SETTING UP THE PRESS FOR OPERATION For shipping convenience, the gauge, pump handle, hoist crank, screw nose and base angles
More informationTC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationAprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
More informationHT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
More informationOPERATION & MAINTENANCE MANUAL. for VERTICAL INLINE PUMPS
OPERATION & MAINTENANCE MANUAL for VERTICAL INLINE PUMPS PATTERSON PUMP COMPANY A SUBSIDIARY OF THE GORMAN-RUPP COMPANY PO Box 790 9201 Ayersville Road Toccoa, Georgia 30577 Telephone: 706-886-2101 SAFETY
More informationRICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE
RICAMBI FLECK P/N 0 O'ring 560 CD 0 P/N 050 Grommet pass rod 20 2300/230/ 2350 P/N 060 Tube 3/8in (0,92 m) 0 P/N 086 Holding Nut M5 2300 0 P/N 0209-0 Quad Ring 560 CD 0 P/N 028 Microswitch 5 P/N 0220 Screw
More informationBuy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model:K 520M /CDN ( 59559150 ) - Parts Section:1.0 PIECE PARTS Page 1 of 16 1 50690940 1 COVER 2 50319770 1 COVER / 1.069-937.0 2 50312410 1 COVER 4 40503340 1 CHASSIS 5 51052230 1 AXLE 6 53215050
More informationGT Horizontal Split Casing Pumps
GT Horizontal Split Casing Pumps 302-054 Operations and Maintenance Manual SUPERSEDES: New EFFECTIVE: March 1, 2009 Plant ID No. 001-3930 SAFETY REQUIREMENTS These operating instructions must be complied
More informationIMPORTANT SAFETY NOTICE
IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will minimize your risk of injury. ITT Goulds
More informationPart No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)
Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner
More informationSJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
More information000594 Eye-bolt for front chain adjustment, Pre-49 singles, 1949-55 twins, 1958-on CS singles 7.60 6.33
Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo
More informationVertical Pumps for the Oil & Gas Industry
Vertical Pumps for the Oil & Gas Industry ITT API Expert ITT Commitment ITT is committed to the Oil and Gas market, which is the largest segment of our business. We have been investing in technology to
More informationPLUMBING VALVES HOUSTON ORLANDO GREENVILLE 800/392-5066 800/327-3022 800/476-2212 TOTAL MAINTENANCE SOLUTIONS
8-1 BRONZE GATE VALVES 125 psi. SWP 200 psi WOG Threaded ends Non-rising stem Solid wedge disc DOMESTIC IMPORT PART # 40300250 1/4 40300260 40300251 3/8 40300261 40300252 1/2 40300262 40300206 3/4 40300263
More informationFROM THE FRAME UP Catalog Items
7 Carburetor CA Carburetors 7 Carburetor Tech Tips Parts Illustration & Factory Carb See: Web/TechTips/Carb/AUC429 SU Factory Spec Sheet Tech Tips Specs 7 Carburetor Carb Sets Complete 7 Carburetor CA010
More informationIndustrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE
Industrial Process Pump Safety Manual IMPORTANT SAFETY NOTICE To: Our Valued Customers User safety is a major focus in the design of our products. Following the precautions outlined in this manual will
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationFEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL
Page 1 of 102 FEDERAL AVIATION ADMINISTRATION - PARTS MANUFACTURER APPROVAL DESIGN DATA Pump 2897-3R 2897-3 Test and Computation per Dwg No: 2897-3R Rev: B Date: 03/23/07 747-100 Series, 747-200B Series,
More informationTrash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001
Trash Pumps Models: 56200, 562000, 56201, 562001, 56300, 563000, 56301, 563001 Specifically designed pumps for heavy duty applications Handles solids with eas and simple to open and clean Standard roll
More information1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationSeries 90 100 cc Axial Piston Pump. Parts Manual
Series 90 100 cc Axial Piston Pump GENERAL INFORMATION Service parts identification... 4 Nameplate... 4 Date code... 5 Service bulletins... 5 Procedure to identify a part... 5 Order code... 7 VARIABLE
More informationInline Pumps Type NCV / NCVL
Inline Pumps Type NCV / NCVL General The DICKOW-Inline-Pumps, series NCV / NCVL, have been developed for the chemical, petrochemical and related industries. Since the pumps are installed inline, only a
More informationALIGNMENT. Pump and Driver Alignment
ALIGNMENT Pump and Driver Alignment Alignment Subject: Pump and Driver Alignment In the pump business alignment means that the centerline of the pump is aligned with the centerline of the driver. Although
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationSolstice/Sky Water Pump Replacement
Solstice/Sky Water Pump Replacement The water pump on the Solstice/Sky is starting to need replacement on some vehicles. This guide will help in replacing the water pump while the engine is still in the
More informationSVA SIGMA PUMPY HRANICE SELF PRIMING PUMPS 426 2.98 16.05
SIGMA PUMPY HRANICE SELF PRIMING PUMPS SVA SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +40 581 661 111, fax: +40 581 60 587 Email: sigmahra@sigmahra.cz 46.98 16.05 Applications
More informationdp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
More informationCUTTER-CRUSHER RAMMER RC 22
11/99 PARTS MANUAL PMRC22EN.A99 CUTTER-CRUSHER RAMMER RC 22 SERIAL NO. RC22BC0015-UP RC22RC0021-UP TABLE OF CONTENTS 1. Cylinder RC 22.......................................................... 4 2. Hydraulics
More informationSeries 1510 and 1510/Universal Centrifugal Pumps
Bell & Gossett INSTRUCTION MANUAL P81673 REVISION F Series 1510 and 1510/Universal Centrifugal Pumps Installation, Operation and Service Instructions INSTALLER: PLEASE LEAVE THIS MANUAL FOR THE OWNER S
More informationNELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
More informationOPERATION ASSEMBLY INSTRUCTIONS AND PARTS LIST FOR L10 DRIVE END (FRAME SIZES 1L10, 2L10, 3L10, 1L10H, 2L10H, 3M8, 3P6, 6P6, 9P6)
Section: L and J FRAME PUMPS Page: 1 Date: (Revision 5/88) OPERATION ASSEMBLY INSTRUCTIONS AND PARTS LIST FOR L10 DRIVE END (FRAME SIZES 1L10, 2L10, 3L10, 1L10H, 2L10H, 3M8, 3P6, 6P6, 9P6) GENERAL The
More information1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 1 of 13 Accessories www.ktoutdoor.com 16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 2 of 13 Accessories 1 219179 1 Nozzle, Round 2
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationVertical selfpriming Side-Channel Pumps Type WPV
Vertical selfpriming Side-Channel Pumps Type WPV FIELD OF APPLICATION The side-channel pumps are selfpriming and operate more economically (better efficiency) than normal centrifugal pumps when handling
More informationDR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
More informationOPERATION & MAINTENANCE MANUAL SUBMERSIBLE SEWAGE PUMP
OPERATION & MAINTENANCE MANUAL SUBMERSIBLE SEWAGE A Mark of Quality CROSS SECTION DRAWING No. DESCRIPTION MATERIAL 01 CABLE PVC. INSU. SHEATHED 02 CABLE PROTECTOR NITRILE RUBBER 03 GLAND COVER C.I. IS-210,
More informationMaintenance and Service Instruction
Screw pumps E4 Maintenance and Service Instruction E4 1 IMO AB This instruction is valid for all E4 pump models shown on page 2 Contents Page List of components 2 Exploded view/ordering code 3 Service
More informationintroduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide.
introduction Welcome to Midwest Motorcycle Supply s Engine Reference Guide. In an effort to make servicing your V-Twin engine easier, the staff at Midwest Motorcycle Supply have put together what we believe
More informationReplacement Spare Parts for FORD TRACTOR
(3650) POWER STEERING HYDRAULIC PUMP GEAR SET (9T.) (866) HYDRAULIC PUMP FRONT DRIVE GEAR (10T.) (C5NN 3A710 A/NUT) STRG. GEAR SHAFT MAIN NUT (C5NN 3A710 A/TUBE) STRG. GEAR SHAFT MAIN NUT TUBE (C5NN 3A710
More informationBuy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.
Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1
More informationKTZ32.2-51. data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ32.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
More informationUNITS Units are designated by the unmounted pump model numbers followed by a letter indicating drive style.
TECHNICAL SERVICE MANUAL UNIVERSAL SEAL HEAVY DUTY PUMPS SERIES 124A, 4124A, 224A, 224AH, 4224A AND 4224Ah CAST IRON SERIES 126A, 4126A, 226A AND 4226A DUCTILE IRON SERIES 123A, 4123A, 223A AND 4223A STEEL
More informationCommon Rail Spare Parts Catalogue
Common Rail Spare Parts Catalogue Fax.No. ++44(0)54 53547 E-mail. sales@darwendiesels.co.uk www.darwendiesels.co.uk C O M M 7D50 4.5mmx7.5mmx.5mm copper Fitted to Mercedes 7D5 4.5mmx7.5mmx3mm copper Fitted
More informationSeaStar steering parts
Helms: SeaStar steering parts SEASTAR/HYNAUTIC helm parts BayStar HELM SEAL KIT BAYSTAR (HS17) Replacement shaft seal kit for BayStar helms only. Contains three screws, shaft seal and o-ring. (See Items
More informationATTIX 350, 360, 8 GALLON
Model: ATTIX 350-01 ATTIX 360-11 ATTIX 360-21 Part List English Table of Contents Cabinet 350-01, 8 GALLON 3 Cabinet 360-11, -21, 8 GALLON AS/E 5 Motor/ Filter 7 Container 9 Accessories 350 / 360 11 Accessories
More informationBACKPACK SPRAYERS. MODEL NOS: KSP16 & KSP20 Part Nos: 3402270 & 3402275 OPERATING & MAINTENANCE INSTRUCTIONS GC04/12
BACKPACK SPRAYERS MODEL NOS: KSP16 & KSP20 Part Nos: 3402270 & 3402275 OPERATING & MAINTENANCE INSTRUCTIONS GC04/12 INTRODUCTION Thank you for purchasing this CLARKE Sprayer, designed for use only with
More informationAuto mo tive Cor po ra tion TC 237 TRANSFER CASE PARTS MAN UAL
Auto mo tive Cor po ra tion TC 237 TRANSFER CASE PARTS MAN UAL Fabco Automotive Corporation, Livermore, CA Ph: (925) 454-9500 Fax: (925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com See Note 5 See
More informationTECHNICAL SERVICE MANUAL
TECHNICAL SERVICE MANUAL HEAVY-DUTY PUMPS SERIES 4195 AND 495 SIZES GG - AL SECTION TSM 144 PAGE 1 of 10 ISSUE D CONTENTS Introduction....................... 1 Safety Information.................... 2
More informationILLUSTRATED PARTS LIST XTREME ICE MAKER (1230 SERIES) MODEL NO.
XTREME ICE MAKER (0 SERIES) MODEL NO. 00 00 00 00 00 00 0 XTREME ICE MAKER (0 SERIES) FIGURE. GENERAL ASSEMBLY (AIR CONDENSER SHOWN) 00 Screw TC - HXWS 00000 Screw TC - HXWS 0 (Marine) 0000 Grommet Nut
More informationGROENEVELD AUTOMATIC GREASING SYSTEMS
GROENEVELD AUTOMATIC GREASING SYSTEMS TWIN Parts & Accessories Book Pumps, Fittings, Injectors, Lining, etc. www.groeneveld-group.com 1 TWIN ELECTRICAL Item Part # Description 1 F113966 Switch 24V 2 F122991
More informationSERIES 127A AND 4127A STAINLESS STEEL SIZES H, HL, K, KK, L, LQ, LL CONTENTS UNMOUNTED PUMP UNITS
TECHNICAL SERVICE MANUAL UNIVERSAL SEAL HEAVY DUTY PUMPS SERIES 124A, 4124A, 124AE, 4124AE, AND 4124B CAST IRON SERIES 126A AND 4126A DUCTILE IRON SERIES 123A AND 4123A STEEL SERIES 127A AND 4127A STAINLESS
More informationEaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-5005C March 2003
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-00C March 00 For the most current information, visit the Roadranger web site at www.roadranger.com Contents How To Use The Illustrated Parts
More informationSpira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationService Parts. John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF. Engine. Engine Models:
Service s Engine Engine Models: John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF Generator Models: 20--40ROZJ/REOZJ 20--40DSJ/DSEJ 50/60ROZJ serial nos. 257821 and above 50/60REOZJ/REOZJB 50/60DSJ/DSEJ/DSEJB
More informationBR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
More informationPump and Valve Components and Maintenance
Pump and Valve Components and Maintenance Outline: 1. Split case and End Suction pumps, industry in the 21 st century, cost of ownership, and performance tips 2. Split case Pumps features, maintenance,
More informationModel 413 AURORA. 410 Series SINGLE STAGE SPLIT CASE PUMPS WWW.AURORAPUMP.COM
Model Model AURORA Series SINGLE SAGE SPLI CASE PUMPS WWW.AURORAPUMP.COM SINGLE SAGE SPLI CASE PUMPS AURORA Series Single Stage Split Case Pumps Capacities to 00 GPM (0 m /hr) Heads to Ft. (0 m) emperatures
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationINLINE SD-PUMPS WITH IEC-STANDARD MOTOR
INLINE SD-PUMPS WITH IEC-STANDARD MOTOR AT_-1/ Hz DN1 3 r/min min H G 1/ G 1/ 17 11 3xM, Depth 1 1 Ø1 Ø1 xø19 7 3xØ1 9 17 1 xø1 17 1 kw A kg H OKN-13 E1 F19 7. (9). 9 OKN-13 C1 F19. (.) 11. 1 9 OKN-1 E1
More information3", 4", 6" & 8" Model H Series Alarm Check Valve Installation and Maintenance Guide
", ", " & " Model H Series Alarm Check Valve Installation and Maintenance Guide 077 AIRPARK DRIVE STANDISH, MICHIGAN PHONE 99-- 00-2-0 FAX 99--92 www.globesprinkler.com OCTOBER 2 C- BULLETIN A.C.V.I.M.,
More informationDET SIGMA PUMPY HRANICE PUMP TURBINES 426 2.98 81.01
SIGMA PUMPY HRANICE PUMP TURBINES DET SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +420 581 661 111, fax: +420 581 602 587 Email: sigmahra@sigmahra.cz 426 2.98 81.01 Applications
More informationTABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
More informationQLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationSUPER-TITAN. Split-case pumps with power, performance and reliability for a world of applications
SUPER-TITAN Split-case pumps with power, performance and reliability for a world of applications The Prestige. The Performance. SUPER-TITAN PUMPS Features The TKL Super-Titan pump makes a significant contribution
More informationMODEL 341A SINGLE STAGE END SUCTION PUMPS
MODEL 44A MODEL 42A MODEL 41A MODELS 41A, 42A and 44A SINGLE STAGE END SUCTION PUMPS INSTRUCTION AND REPAIR MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip
More informationPARTS LIST DOMESTIC. Eclipse Ergonomic Tilting Braising Pans. BPP-30E, BPP-40E Braising Pans Circa 2003 to Present
IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION PARTS LIST DOMESTIC This manual provides s for: Eclipse Ergonomic Tilting Braising Pans MODELS: BPM-30E, BPM-40E BPP-30E, BPP-40E Braising
More informationINSTALLATION & OPERATING INSTRUCTIONS
INSTALLATION & OPERATING INSTRUCTIONS WARNING RISK OF ELECTRIC SHOCK. CONNECT ONLY TO A CIRCUIT PROTECTED BY A GROUND-FAULT CIRCUIT-INTERRUPTER. THE UNIT SHOULD BE INSTALLED BY A QUALIFIED SERVICE REPRESENTATIVE.
More informationSlide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
More information