Social Housing to CFSH Level 4. Engineering Practice Report Presentation Nov 2011

Transcription

1 Social Housing to CFSH Level 4 Engineering Practice Report Presentation Nov 2011

2 A1 Designing to tight building envelope reference Part F - ventilation free areas Commissioning air tightness testing Identify elements of sustainability and work towards reducing carbon emissions. Engage in post project analysis

3 A1 Evidence Air Permeability Test Certificate

4 A2 Posi-Joist system evaluation duct systems to overcome the practical problems posed. Evaluate solutions to practical and physical problems Develop practical engineering solutions within project constraints.

5 A2 Evidence Data Sheet

6 B1 Summary heat loss information formed a specification schedule Spreadsheet drew information from various sources U values, correction factors and heat loss calculations spreadsheets. Use software or tabulated data in developing solutions. Use spreadsheets to consolidate information

7 B2 Evaluation extent and capacity of PV Advised anticipated electrical loads and export potential / cost implications Use / evaluate innovative solutions / new technology in specific projects with particular reference to sustainability and reduced carbon emissions.

8 B2 Evidence Data Sheet

9 B3 Verification of progress and quality of workmanship Post occupancy evaluation feedback suggested misuse of MVHR unit Information used for future designs on similar projects Undertake project analysis to establish resource level required. Participate in the analysis of a post-occupancy review

10 C1 Coordination of final handover material manufacturer s datasheets safety certificates commissioning certificates as built drawings Contribute to preparation/handling of handover/closing documentation.

11 C1 Evidence As Built Drawing

12 C2 issue sheets produced to indicate the time of issue in line with project milestones tool for continuous evaluation involved in the project from early design stage through to handover in June 2011 Schedule work against agreed targets and monitor progress. Engage in ongoing evaluation of building services engineering projects from conception to completion.

13 C3 Member of design team and internal team of engineers working alongside Architect, Structural Engineer, CDM coordinator, Contractor, Sub Contractors Internal role responsibilities Day to day management, Development morale, Training where necessary Have experience of working with colleagues, contemporaries and other professionals.

14 C4 Monitoring of document control ISO standard. Quality checks on Calculations Drawings correct information was recorded and maintained Company audit team regular random checks external auditors access to data Take part in quality circles or similar. Point to examples of QA success/shortfall.

15 C4 Evidence Quality Control

16 D1 Coordinated and chaired M&E meetings prepared agendas meeting minutes circulated records Prepare agendas, participate in and minute meetings.

17 D2 Prepared and delivered a PowerPoint presentation Part L2 Chaired seminar on the topic Develop and practice skills in presentation e.g. appropriate software, flip charts, overheads, having prepared the material. Attend seminars, courses, feed back knowledge gained, ask questions and debate answers.

18 D2 Evidence Presentation Slide

19 D3 Communicated at various levels colleagues, clients, consultants and contractors. Memos internally Formal letters to clients Formal instructions via Online cloud services for file sharing Develop inter-personal skills e.g. assertiveness, negotiation, compromise and dealing with conflict. Select and use a variety of communications styles e.g. formal, informal. Write for different uses e.g. memos, formal letters, reports, s, minutes.

20 D3 Evidence Communication

21 E1 Read and understood the codes of conduct. Attended Part L Low Carbon Consultants course Examination pass gives professional recognition for EngDesign clients assurance Obtain and maintain a working knowledge of all relevant current and impending legislation and codes of practice that will impact on your work.

22 E1 Evidence CPD

23 E2 Designers Health and Safety risk assessment document danger areas of work severity of risk potential consequences Participate in providing information for the Health and Safety plan for projects and to comply with the Construction (Design & Management) Regulations (CDM).

24 E2 Evidence Risk Assessment

25 E3 I was responsible for the preliminary design process that identified the services necessary to meet the CFSH level 4 criteria of 44% energy improvement on Part L requirements. Through the SAP calculation tool I demonstrated a given area of photovoltaics and MVHR ventilation units would meet the Code level 4 requirements. Actively engage in the process of reducing carbon emissions by reducing energy requirements Where possible, use sustainable technologies such as photovoltaics, wind power, biomass etc.

26 E4 Number of manufacturer seminars including GHP Cool Phase Technologies unfamiliar to office staff applicable to areas of work. Reviewed CIBSE competencies with graduate staff Identified areas for development Opportunity for experience given by assigning appropriate tasks Carry out CPD activities. Assist others with their own CPD.

27 Project Conclusion Lakehouse Webpage Project Completion