PCB mounted UTS Hi seal: rugged & plastic

Transcription

1 PC mounted UTS Hi seal: rugged & plastic Jam nut & Square flange receptacles with PC tail contacts were designed for applications in harsh environments where s are used in wet, corrosive and tight-space conditions. Wave soldering suitable PC Tail contacts Hold down clips for secure mechanical retention Standoffs to ensure consistent height off PC and to aid cleaning process Stand-offs Metal hold down clips (optional) Excellent corrosion resistance Plastic > 500 hr salt spray Pre-assembled PC tail contacts Leakage prevention when no cap IP68/69K mated / unmated UV-resistant 5 years of exposure without mechanical & visual degradation

2 Technical features Mechanical Housing & ackshell: Thermplastic UL94-V0 Insert: Elastomer Contacts: Copper alloy - gold plated Other platings on request Endurance: 250 mating/unmating Vibrations: Sinusoidal vibrations per CEI from 10 to 2000 Hz Thermal shock: 5 cycles 30 min. from -40 C to 105 C per MIL-ST1344 method 1003 Electrical Current rating per contact max: - Size 16: 13 - Size 20: 7.5 Insulation resistance: 5000 MΩ under 500Vcc at 25 C Test potential: Veff between contacts Veff between contacts 16 according to MIL-TL Working voltage: V - contacts V - contacts 16 according to MIL-TL Environmental Temperature range:-40 C to C Salt spray resistance: 500 hours Sealing (mated/unmated): - ynamic IP68 - under water for 1 week, 1 bar - ynamic IP69K per IN UV resistance: No mechanical degradation or important variation of color after 5 years of exposure in natural environment (equivalence exposure to sun and moisture as per ISO4892) RoHS compliant & conform to the Chinese standard SJ/T (Chinese RoHS equivalent) Ordering information Connector family UTS P - - ody variation ackshell 7 Jam nut receptacle 0 Square flange receptacle No digit: No backshell 8, 10, 12, 14, 18 Contact type = PC tail contacts Insert arrangement See next page Contact gender Insert rotation Specification P = Pin contacts S = Socket contacts No digit = Normal W, X, Y, Z = ifferent orientations No digit: Standard version 32: version with hold down clips (only for Jam nut receptacle) 2

3 Contacts layouts Size 8 Size / Ø 1 (#20) 3 Ø 1 (#20) 3 Ø 1 (#20) 4 Ø 1 (#20) 3 Ø 1 (#20) 6 Ø 1 (#20) 7 Ø 1 (#20) 6 Ø 1 (#20) Size Ø 1.6 (#16) 3 Ø 1.6 (#16) 8 Ø 1 (#20) 10 Ø 1 (#20) 14 Ø 1 (#20) Size 14 Size 18* Ø 1.6 (#16) 18 8 Ø 1 (#20) 4 Ø 1.6 (#16) Ø 1 (#20) 1 Ø 1.6 (#16) 11 Ø 1.6 (#16) Ø 1 (#20) 1 Ø 1.6 (#16) 18 Ø 1 (#20) 19 Ø 1 (#20) 32 Ø 1 (#20) * Please consult factory 3

4 Insert orientation* Normal X Z W Y s layouts angle in degrees W X Y Z (98)* * * * Insert rotated in body (viewed from front face of male insert) * 8-98 layout, W and X non standard orientations / 10-7 & layouts, W non standard orientation Range presentation Square flange receptacle with PC contacts C I E Ø 3.20 ±0.1 E 4 Holes Ø 3.20 ±0.1 Ø max. C ±0.15 ±0.15 max. I E ±0.25 ±0.25 Male emale ±0.25 Ø ± / (1) / (2) 9.55 / (1) / (2) 7 / UNE / / / UNE / (3) 9.55 / (3) 11 / UNE / / / / / UNE Please consult us (1) for layouts 8-2, 8-3, 8-4 / (2) for layouts 8-3, 8-89, 8-33 / (3) for layout

5 Jam nut receptacle with PC contacts Panel thickness C G Ø 0.6 ±0.05 Contact #20 Ø 1 ±0.05 Contact #16 H Tightening torque Ø ±0.15 max. C max. Panel thickness max. G Male H emale Tightening torque (Nm) Ø ±0.2 ± / 6.0 (1) 4.7 / 7.25 (2) 3.75 / 5.8 (1) 4.8 / 6.9 (2) 9 / UNE / / / UNE / (3) 5.2 / 7 (3) 7 / 8 20 UNE / 5.9 (4) 3.85 / 5.9 (4) / / UNE Please consult us (1) for layouts 8-2, 8-3, 8-4 / (2) for layouts 8-3, 8-98, 8-33 / (3) for layouts 12-3, 12-, / (4) for layout Jam nut receptacle with PC contacts & hold on clips Panel thickness C E Ø 0.6 ±0.05 Contact #20 Ø 1 ±0.05 Contact #16 G H Hold down pin Ø ±0.15 max. C max. Panel thickness max. E ±0.2 G Male H emale Tightening torque (Nm) Ø ±0.2 ± / / / UNE / (3) 5.2 / 7 (3) 7 / 8 20 UNE / 5.9 (4) 3.85 / 5.9 (4) (1) for layouts 8-2, 8-3, 8-4 / (2) for layouts 8-3, 8-98, 8-33 / (3) for layouts 12-3, 12-, / (4) for layout / 6.0 (1) 4.7 / 7.25 (2) 3.75 / 5.8 (1) 4.8 / 6.9 (2) 9 / UNE / / UNE Please consult us 5

6 ccessories Jam nut sealing caps Part numbers Part numbers UTS8CG 8 UTS10CG 10 UTS12CG 12 UTS14CG 14 UTS18CG 18 UTS8CGR 8 UTS10CGR 10 UTS12CGR 12 UTS14CGR 14 UTS18CGR 18 Metal terminal* Square flange sealing cap Colour coding rings Part numbers UTS8CGE 8 UTS10CGE 10 UTS12CGE 12 UTS14CGE 14 UTS18CGE 18 Metal terminal* Receptacles Part numbers Plugs UTS710CCR* UTS610CCR* 10 UTS712CCR* UTS612CCR* 12 UTS714CCR* UTS614CCR* 14 * dd G for Green, Y for Yellow, R for Red or shell s 8 & 18, please consult factory Gasket Plastic protective cap Part numbers / neoprene UT11 8 UT12 10 UT13 12 UT14 14 UT16 18 Part numbers Receptacle Plug cap cap

7 rilling patterns /

8 or further information, visit our website or contact us at contactindustry@souriau.com WINUTSHSP00301EN Copyright SOURIU september ll information in this document presents only general particulars and shall not form part of any contract. ll rights reserved to SOURIU for changes without prior notification or public announcement. ny duplication is prohibited, unless approved in writing.

9 UTS ctive steering system tion Leakage detec Robot anagement Road traffic m ther station Outdoor wea SOU R IU S..S 9 rue de la Porte de uc Versailles rance - Tel ax