Drilling & Piling Attachments. of Sweden

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Drilling & Piling Attachments. of Sweden"

Transcription

1 Drilling & Piling Attachments of Sweden General Catalogue 2012

2 Made in Sweden

3 Blast Hole Drilling MD33 MD45 DM60 Foundation Drilling SPD AB It s with pride and joy I present our company SPD AB. DM85 DM-X DT85 DT145 We are a company specialized in manufacturing drilling and foundation equipment. Almost 20 years of experience and the fact that we only use high quality components from world leading manufacturers has resulted in a range of robust and reliable products. Magnus Andersson CEO We make money the old-fashioned way. We earn it! -Merril Lynch Piling PM85 PM-X PT145 Accessories Drifters Rotary Heads Hydraulic Breakers Piling Hammers

4 Blast Hole Drilling Mast Attachments Some of the benefits with an SPD drilling mast is Quality Reliability Flexibility Service Remote control as standard since 2003 Also possible to remote control the carrier Use the excavator for digging, drilling, piling etc Change between mast and other tools in a couple of minutes

5 Mast attachments for excavators For blast hole drilling Recommended Excavator 4-10 ton MD33 Hole Range* mm Mast Length 3600 mm Stroke, travel length rod 3100 mm Feeding* 10 kn Weight* 750 kg Remote control yes standard Lateral tilt 25 degrees (Option tilt 360 degrees) STD drifter DF500X 10 kw Option drifter*** DF430, HB4, HB5 Recommended hydraulic flow** >125 liter/min Recommended hydraulic pressure** 200 bar Recommended engine power** >30 kw Shank adaptor 7/8 Hex 108 x 22 1 Hex 108 x 25 Dust Collector yes Recommended Excavator 8-16 ton MD45 Hole Range* mm Mast Length Stroke, travel length rod Feeding* Weight* Remote control Lateral tilt STD drifter Option drifter*** Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor Dust Collector 4800 mm 4200 mm 25 kn 850 kg yes standard 360 degrees slew drive DF550S 17 kw COP1132, HB5, HB15 >215 liter/min >250 bar >60 kw R32, R38, T38, T45 yes *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice

6 Blast Hole Drilling Mast Attachments Andersson & Rask company from Hofors, is drilling blast holes with DM60. The mast is fully equipped with GPS and display with X, Y and Z on the remote control, even the carrier Volvo EC210 is remote controlled.

7 Mast attachments for excavators For blast hole drilling Recommended Excavator ton DM60 Hole Range* mm Mast Length Stroke, travel length rod Feeding* Weight* Remote control Lateral tilt STD drifter Option drifter*** Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor Dust Collector 6500 mm 5800 mm 25 kn 1500 kg yes standard 360 degrees slew drive DF550S 17 kw COP1240, HB5, HB15 >215 liter/min >250 bar >60 kw R32, R38, T38, T45 yes *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice

8 Foundation Drilling Mast Attachments Skanska Grundläggning is drilling piles for wind mills in Gothenburg coastline, with DM85 drilling mast

9 Mast attachments for excavators For foundation drilling, combined with blast hole drilling Recommended Excavator ton DM85 Hole Range* <323 mm Mast Length Stroke, travel length Feeding* Weight* Remote control Lateral tilt STD drifter STD rotary drive Recommended hydraulic flow** Recommended hydraulic pressure** Recommended engine power** Shank adaptor Water pump for dust binding 9000 mm 7000 mm 80 kn 4500 kg yes standard 90 degrees Krupp HB45 Krupp HR liter/min >250 bar >89 kw R55 Left/Right C64 Left/Right T38, T45, T51 Left Option Recommended Excavator ton DM-X Modular System Hole Range* <323 mm *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable Mast Length Modular system, 5500 mm mm mm Stroke, travel length 3500 mm/6500 mm/8500 mm Feeding* 80 kn Weight* 3500 kg kg Remote control yes standard Lateral tilt 90 degrees STD drifter Krupp HB45 STD rotary drive Krupp HR40 Recommended hydraulic flow** 260 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw Shank adaptor R55 Left/Right C64 Left/Right T38, T45, T51 Left Water pump for dust binding Option >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice

10 Foundation Drilling Mast Attachments BESAB is drilling anchors in the docks in Landskrona with DT145 on Volvo EC290 carrier

11 Mast attachments for excavators For foundation drilling Recommended Excavator ton DT85 Telescopic System Hole Range* <323 mm Mast Length Telescopic System 5500 mm mm Stroke, travel length 7000 mm Feeding* 100 kn Weight* 5500 kg Remote control yes standard Lateral tilt 90 degrees STD drifter Krupp HB45 STD rotary drive Krupp HR40 Recommended hydraulic flow** 260 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw Shank adaptor R55 Left/Right C64 Left/Right T38, T45, T51 Left Water pump for dust binding Option Recommended Excavator ton DT145 Telescopic System Hole Range* <403 mm *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable Mast Length Telescopic System 9000 mm mm Stroke, travel length mm Feeding* 140 kn Weight* 6500 kg Remote control yes standard Lateral tilt 90 degrees Slewing mast left to right 180 degrees STD drifter Krupp HB45 STD rotary drive Krupp HR40 Recommended hydraulic flow** 260 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw Shank adaptor R55 Left/Right C64 Left/Right T38, T45, T51 Left Water pump for dust binding Option >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice

12 Piling Mast Attachments Kankareen Paalutus OY is piling steel piles for the foundation of the new SPD factory 2010 in Sala Sweden They are using PT145 which is the largest and latest of their seven machines from SPD.

13 Mast attachments for excavators For Micro Piling Recommended Excavator ton PM85 Pile Range* 76 mm mm Mast Length 9000 mm Stroke, travel length 7000 mm Feeding* 80 kn Weight* 4500 kg Remote control yes standard Lateral tilt 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** 120 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw Recommended Excavator ton PM-X Modular System Pile Range* 76 mm mm Mast Length Modular system, 5500 mm mm mm Stroke, travel length 3500 mm/6500 mm/8500 mm Feeding* 80 kn Weight* 3500 kg kg Remote control yes standard Lateral tilt 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** 260 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice

14 Piling Mast Attachments Engströms piling rig PT145 on the trailer, on the way to the jobsite

15 Mast attachments for excavators For Micro Piling Recommended Excavator ton PT85 Telescopic System Pile Range* 76 mm mm Mast Length Telescopic System 5500 mm mm Stroke, travel length 7000 mm Feeding* 100 kn Weight* 4500 kg Remote control yes standard Lateral tilt 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** 120 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw Recommended Excavator ton PT145 Telescopic System Pile Range* 76 mm mm Mast Length Telescopic System 9000 mm mm Stroke, travel length mm Feeding* 140 kn Weight* 5000 kg Remote control yes standard Lateral tilt 90 degrees STD piling hammer SPD 1000, RR 76 - RR 140 Option piling hammer*** SPD 2000 RR 90 - RR 170 Recommended hydraulic flow** 120 liter/min Recommended hydraulic pressure** >250 bar Recommended engine power** >89 kw *Nominal value (depending on different tools and equipment) **Approximate (depending on what drifter, rotary head or other hydraulic consumption) ***Choice at order -Not applicable >More than <Less than Overcenter valve (load holding valve) on excavator cylinders must be guaranteed by customer All measures and values are approximate and can be changed without further notice

16 Accessories Krupp HR40 Rotary Head Thyssen Krupp rotary head with integrated flushing head

17 Drifters & Rotary Heads Thyssen Krupp HB5

18 Accessories Krupp HB45 Drifter Drilling and foundation are a demanding industry, that s why we use drifters or rotary heads from Thyssen Krupp and Doofor mainly.

19 Drifters & Rotary Heads

20 Accessories Doofor Drifters

21 Drifters & Rotary Heads Doofor Rock drill name DF430X DF500X DF510X DF550S DF600S Percussion power class 5kW 10kW 10kW 17kW 20kW Shank/Striker or chuck type Hex 108 mm * 22 mm Hex 159*25mm Male R32 Male T45 Hex 108 mm * 25 mm Male R38 Male T51 Male T38 Male T45 Recommended maximum 36 mm 45 mm 45 mm 70 mm 89 mm Hole diameter Percussion oil pressure 110 bar 130 bar 130 bar 160 bar 140 bar Max. rotation speed 300 RPM 300 RPM 300 RPM 200 RPM 180 RPM with recommended motor Max. rotation torque 100 Nm 110 Nm 110 Nm 1300 Nm 1645 Nm intermitent Weight 41 Kg 55 Kg 59 Kg 152 Kg 230 Kg Length without 460 mm 532 mm 584 mm 998 mm 1002 mm shank adapter Width 232 mm 245 mm 245 mm 292 mm 363 mm Height 165 mm 172 mm 172 mm 292 mm 289 mm

22 Accessories SPD Hydraulic Rock Breakers

23 SPD Hydraulic Rock Breakers SPECIFICATIONS: T-series Description H90 H100 H180T H300T H380T H580T H900T h1000 H1200T H1500T H1700T Weight (kg) Oilflow (l/min) Pressure (bar) Blows (B/min) Tool (mm) Excavator (t) Energy (J) dB (A) radius (m) Heigth with tool (mm) , Hose Diameter (inch) 1/2" 1/2" 1/2" 1/2" 1/2" 3/4" 3/4" 1 1" 1" 1" Piston weight (Kg) SPECIFICATIONS: F- and E-series Description H1600F H1700F H2400F H2800F H1100E H1500E H2100E H2800E H3000E h5000e Weight (kg) Oilflow (l/min) Pressure (bar) Blows (B/min) Tool (mm) Excavator (t) Energy (J) dB (A) radius (m) Heigth with tool (mm) Hose Diameter (inch) 1" 1" 1 1/4" 1 1/4" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/4 Piston weight (kg) Valve [ t-series ] [ f-series ] [ e-series ] Tie rod - Dynamic screw design prevents damage Valve Valve Accumulator - Reduces irregular pulse pressure on hydraulic circuit - Improved striking power with supply of accumulated gas pressure Accumulator Accumulator Valve housing Extended piston stroke - Smoother operation - Minimal repercussion on carrier Improved properties (Piston) - Improved emergency running properties - Manufactured with high-quality nickel and vanadium alloy steel SPD tool - Exceptional performance and reliability - Manufactured with high-quality alloy steel Back Head - Start-up safety - Power accumulator Lubrication adequate for entire shift - Reduced wear and tear - Consistent availability due to extended maintenance intervals Cylinder & Valve - Prevents scoring with precision finishing treatment

24 SPD Piling Hammers SPECIFICATIONS: SPD Piling Hammers Description SPD150 SPD200 SPD300 SPD350 SPD400 SPD1000 SPD1500 SPD2000 SPD3600 SPD4000 SPD5000 Weight (kg) Oilflow (l/min) Pressure (bar) Blows (B/min) Tool (mm) Excavator (t) 0,8-3,0 1,0-3,5 2,0-7,0 3,5-9,0 6,0-11,0 9,0-12,0 13,0-18,0 18,0-26,0 28,0-35,0 33,0-50,0 45,0-55,0 Energy (J) dB (A) radius (m) Heigth with tool (mm) Hose Diameter (inch) 1/2" 1/2" 1/2" 1/2" 3/4«3/4" 1«1" 1" 1 1/4 1 1/4 Piston weight (Kg) 5,4 7,8 14, ,5 42, Functions SPD Piling Hammers is enviromental friendly hammer series, which offer low noise level, high impact power, and is the ideal piling tool The energy of piston stroke is accumulated due to charged nitrogen gas in the backhead. The hammers have high piston weight because it s needed when piling Accumulator as high pressure surge dampener, it s for protecting pump output of base machine. All our hammers always include: 2 pcs std tools, 2 pcs std hoses, 1 top bracket, 1 set of Nitrogen filling set, 1 pcs of tool box, 1 pcs manual, 1 pcs spare parts list SPD uses the highest quality materials which are machined by our experienced technicians utilizing state-of-the-art manufacturing technology and production machinery. SPD s stringent quality control procedures ensure superior quality hydraulic hammers. - Precision machining - Strict monitoring of temperatures and time intervals for multi-phase heat treatment processes - Precision welding of hammer holders, hammer brackets and adapters - Stringent, continuous quality control checks and comprehensive final testing of all SPD hydraulic hammers prior to delivery

25 Remote Controls Remote Controls are standard on all our rigs. Developed together with our customers during a long time Various range of types depending of use and attachment model The most advanced with display for drilling data, X, Y and Z and GPS

26 SPD - BM Frontloader SPD s BM frontloader is a useful tool for mounting on wheeled excavators in the tonne class. Standard is a BM hydraulic quick hitch with both lift and tilt and hydraulic locking of the bucket. The linkage is bolted into existing bolt mount on the loader and mounted on the dozer blade hydraulics, functions of the frontloader is controlled by a wireless remote control. You can use it to transport the material in the bucket, or pallets with pallet forks, or to move the other tools in the bucket between the workstations. Other tools that can be used are eg railway wheels, sweeper, snow blade or blade with BM quick hitch Tekniska data Quickcoupler Max hydraulic pressure Recommended oilflow Tilting angle Lifting height Max load Electric feeding Controls Hydraulic feeding from Volvo BM 250 bar liter/min Approx 45 degrees Approx 900 mm 2000 kg volt Remote Dozer hydraulics To be attached to: Volvo, Cat, Komatsu, Terex, Hitachi, Liebherr, Doosan etc ton

27 Made in Sweden

28 Fridhemsgatan 16, Sala, Sweden tel. +46 (0) mobil. +46 (0)

Atlas Copco Surface Drill rig

Atlas Copco Surface Drill rig Atlas Copco Surface Drill rig ROC D for m m 89 m m hole range ROC D7 for 6 m m m m hole range Full radio remote controlled drill rigs exceptionally maneuverable in the roughest terrain. Radio Remote Control

More information

Post Pounders & Post Hole Augers

Post Pounders & Post Hole Augers Post Pounders & Post Hole Augers High & Heavy Hitters Side Mast Our most popular model for all heavy and light duty post placement Ability to move sideways a total of 16 Four hammer head mounting positions

More information

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

Wheatheart Post Pounder Features & Options Wheatheart Post Pounders are ideal for fencing, vineyard and orchard applications.

Wheatheart Post Pounder Features & Options Wheatheart Post Pounders are ideal for fencing, vineyard and orchard applications. Fencing Equipment Wheatheart Post Pounder Features & Options Wheatheart Post Pounders are ideal for fencing, vineyard and orchard applications. Heavyduty and hard hitting Low maintenance (no springs in

More information

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS

JCB MIDI EXCAVATOR 8040 ZTS / 8045 ZTS OPERATING WEIGHT: 9,480 lb (4,300 kg) 10,472 lb (4,750 kg) NET ENGINE POWER: 45 hp (33.1 kw) Interim Tier IV STATIC DIMENSIONS A Sprocket Idler Centers 6-1 (1845) 6-6 (1990) B Undercarriage Overall Length

More information

Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 )

Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) Atlas Copco Surface drill rigs SmartROC T35/ T40 Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) When smart means easy and efficient Main benefits Combines low fuel

More information

S36 ROCK DRILL Rock Drill & Blast Equipment and Technical Overview

S36 ROCK DRILL Rock Drill & Blast Equipment and Technical Overview S36 ROCK DRILL Rock Drill & Blast Equipment and Technical Overview Copyright 2012. All rights reserved. S36 rock drill continues on its long history of providing premium Rock Drill and Blast Drilling products

More information

Rock Drills, Rotary Hammers, Sinker Drills. High-performance products. Designed for you!

Rock Drills, Rotary Hammers, Sinker Drills. High-performance products. Designed for you! High-performance products. Designed for you! Rock Drills, Rotary Hammers, Sinker Drills Key features Rotary Hammers, Hammer Drills The CP range of compact and lightweight plughole drills includes tools

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 2012/04/19 TECHNICAL SPECIFICATIONS Elite LOADER BOOMS Main boom: rectangular structure 6" x 8" (152 mm x 203 mm) made of high tensile steel Stick boom: rectangular structure 6" x 6" (152 mm x 152 mm)

More information

Standard for flexibility and future-oriented technology

Standard for flexibility and future-oriented technology Standard for flexibility and future-oriented technology for tractors: The front hitch is designed in a way to be ideally integrated in the tractor Welded frame construction Construction is adjusted to

More information

Worldwide network in over 40 countries.

Worldwide network in over 40 countries. Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers

More information

Sandvik DC120 & DC300 series Been there

Sandvik DC120 & DC300 series Been there Sandvik DC120 & DC300 series Been there The little drill that can When you need to do small diameter drilling - in the 24 to 45 mm (7/8 to 1 ¾ ) hole range - that involves foundation drilling, road cutting,

More information

E18SR 11.3 kw hp kg 660 mm 44 l

E18SR 11.3 kw hp kg 660 mm 44 l net flywheel power operating weight (MAX) REAR END SWING RADIUS bucket capacity E18SR 11.3 kw - 15.2 hp 1 65 kg 66 44 l 18SR * A GREAT SMALL GENIUS 212 MIN. WORKING DISTANCE NEW ENGINE Little powerful

More information

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1

Skid Steer Loader CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg NET POWER CK20-1: 51,8 kw / 69,5 HP @ 2.500 rpm CK30-1: 62 kw / 84 HP @ 2.500 rpm

More information

301.7D. Mini Hydraulic Excavator

301.7D. Mini Hydraulic Excavator 301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 2 HYDRAULIC AND PNEUMATIC CYLINDERS The material needed for outcome 2 is very extensive

More information

CHRISTENSEN 140. Surface core drilling rig for medium to large depths

CHRISTENSEN 140. Surface core drilling rig for medium to large depths CHRISTENSEN 140 Surface core drilling rig for medium to large depths GAME CHANGER THE NEW CHRISTENSEN 140 EXPLORATION DRILL RIG FROM ATLAS COPCO CAN BE THE GAME CHANGER YOU NEED. EQUIPPED WITH THIS NEW

More information

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation

More information

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines

PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling

More information

2. Crane standing on firm, horizontal ground.

2. Crane standing on firm, horizontal ground. The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom

More information

VOLVO COMPACT EXCAVATORS ECR28, ECR38 Power installed: ECR28 : 13.5 kw / 18.1 hp ECR38 : 19.7 kw / 26.4 hp Operating Weight : ECR28 : 2727-2821 kg ECR38 : 3343-3437 kg Maximum Digging Depth : ECR28 : 2660-2910

More information

KUBOTA MINI-EXCAVATOR

KUBOTA MINI-EXCAVATOR KUBOTA MINI-EXCAVATOR May the largest force be with you! The KX41-3 packs the greatest lifting force, the deepest dig depth, and the most powerful digging force in the 1.5-ton class. Put the KX41-3 mini-excavator

More information

JCB LOADALLS 506C, 506C HL, 508C SPEC LIFT AND PLACE TELESCOPIC HANDLERS. Construction Equipment

JCB LOADALLS 506C, 506C HL, 508C SPEC LIFT AND PLACE TELESCOPIC HANDLERS. Construction Equipment JCB LOADALLS 06C, 06C HL, 08C SPEC LIFT AND PLACE TELESCOPIC HANDLERS Construction Equipment JCB TELESCOPIC HANDLER 06C MAX. PAYLOAD: MAX. LIFT HEIGHT: 6000lbs (2722kg) 36ft 0in (11.0 meters) A D B C H

More information

Swing System. Sound Levels. Electrical System. Blade

Swing System. Sound Levels. Electrical System. Blade Engine Model Mitsubishi L3E NA Diesel Rated net power (ISO 9249) 13.5 kw 18.1 hp Gross power 14 kw 19 hp Meets U.S. EPA Interim Tier 4 emissions requirements. Swing System Machine swing speed 10.5 rpm

More information

OUR DRILL RIG RANGE. PRODUCING QUALITY. Ideal for Well drilling Geothermal drilling

OUR DRILL RIG RANGE. PRODUCING QUALITY.  Ideal for Well drilling Geothermal drilling PRODUCING QUALITY. Ideal for Well drilling Geothermal drilling Geological exploration drilling Probe drilling OUR DRILL RIG RANGE. www.adler-arbeitsmaschinen.de Breaking new ground Powerful drilling solutions

More information

HYDAC Compact Power Units CA

HYDAC Compact Power Units CA 1007 HYDAC Compact Power Units CA Up to 250 bar Up to 12.6 l/min Suitable for: Short-term operation S2 Intermittent operation S3 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL For short-term operation S2 or intermittent

More information

E08 E10. Compact Excavators

E08 E10. Compact Excavators E08 E10 Compact Excavators E08 Micro-Excavator Retractable undercarriage and blade Foldable TOPS structure Built-in operator safety Compact dimensions Cylinder-over-the-boom design Optional Demolition

More information

Workshop Compressors CLASSIC Series

Workshop Compressors CLASSIC Series www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using

More information

CGM COLD CUTTING & BEVELING MACHINE (PNEUMATIC AND HYDRAULIC)

CGM COLD CUTTING & BEVELING MACHINE (PNEUMATIC AND HYDRAULIC) CGM COLD CUTTING & BEVELING MACHINE (PNEUMATIC AND HYDRAULIC) Blade Height Adjustment Handle HYDRAULIC CGM P COLD CUTTING MACHINE The Mathey Dearman CGM chain-driven cold cutting system smoothly cuts and

More information

Mechanical PULLING & EXTRACTING

Mechanical PULLING & EXTRACTING Mechanical PULLING & EXTRACTING Twin and Triple Leg Pullers n Toledo mechanical pullers are manufactured from drop forged chrome vanadium alloy steel n Designed for easy removal of bearings, pulleys, gears

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

THE COMPANY 02 CZM FOUNDATION EQUIPMENT SAVANNAH GEORGIA USA

THE COMPANY 02 CZM FOUNDATION EQUIPMENT SAVANNAH GEORGIA USA PRODUCT LINE SAVANNAH GEORGIA USA BELO HORIZONTE MINAS GERAIS BRAZIL SÃO PAULO SÃO PAULO BRAZIL THE COMPANY CZM has 40 years of know-how in the manufacturing of foundation equpament with a wide range of

More information

FLUTEC Pressure Relief Valves

FLUTEC Pressure Relief Valves FLUTEC Pressure Relief Valves Pressure Relief DB4E 1.1. up to 630 bar up to 30 l/min Connection housings 2 1. DESCRIPTION 1.1. GENERAL According to DIN -ISO 1219, DB4E are valves for oil hydraulic systems

More information

HEDGE CUTTERS Professional hedge cutters KATIA PRO CAMILLA PRO

HEDGE CUTTERS Professional hedge cutters KATIA PRO CAMILLA PRO HEDGE CUTTERS Professional hedge cutters KATIA PRO CAMILLA PRO HEDGE CUTTERS FLEXIBILITY AT WORK! KATIA and CAMILLA are the new hedge cutters designed for contractors and road maintenance professionals

More information

A concentration of power in such a small space?

A concentration of power in such a small space? A concentration of power in such a small space? 20M industrial air motors 20M industrial air motors Be demanding 20M industrial air motors: solutions for every need Compact, performing, light, reliable:

More information

303.5E CR, 304E CR, 305E CR, 305.5E CR

303.5E CR, 304E CR, 305E CR, 305.5E CR 303.5E CR, 304E CR, 305E CR, 305.5E CR Mini Hydraulic Excavators 303.5E CR 304E CR 305E CR 305.5E CR Engine Engine Model Cat C1.8 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 23.6 kw (31.6 hp) 30 kw

More information

JCB MINI EXCAVATOR 8025/8030/8035 ZTS

JCB MINI EXCAVATOR 8025/8030/8035 ZTS JB MINI EXAVATOR 05/030/035 ZTS OPERATING WEIGT: 5 kg (599 lb), 37kg (709 lb) & 35 kg (03 lb) NET ENGINE POWER: 0 kw (. hp) &.7 kw (30. hp) D F K G L I A B E J STATI DIMENSIONS Machine model 05 ZTS 030

More information

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated

More information

Sandvik TH230L. General Arrangement

Sandvik TH230L. General Arrangement Technical Specification TH230L-Revision 2 1/8 General Arrangement 60 4700 1962 1937 282 9633 4774 3467 3012 40 8680 4451 5.5 m Revision Date: -5-05 Copyright Technical Specification TH230L-Revision 2 2/8

More information

Atlas Copco Surface drill rigs. FlexiROC T45. Hole diameter mm (3 ½ 5 ) - Folding boom mm (3 ½ 5½ ) - Fixed boom

Atlas Copco Surface drill rigs. FlexiROC T45. Hole diameter mm (3 ½ 5 ) - Folding boom mm (3 ½ 5½ ) - Fixed boom Atlas Copco Surface drill rigs FlexiROC T45 Hole diameter 89 127 mm (3 ½ 5 ) - Folding boom 89-140 mm (3 ½ 5½ ) - Fixed boom You have to see it to believe it Main benefits Fuel efficiency Efficiency like

More information

TITGEMEYER Tb1433GB(0116)1. Installation Tools for threaded inserts

TITGEMEYER Tb1433GB(0116)1. Installation Tools for threaded inserts TITGEMEYER Installation Tools for threaded inserts manual Hand tool R 1 Complete with reversible-ratchet ring spanner and Allen key. The force required to fix the blind rivet nut is created, in the case

More information

RAMMER HITS FIRST CONTENT COMPACT RANGE 108... 4-7 211... 4-7 315... 4-7 522... 4-7

RAMMER HITS FIRST CONTENT COMPACT RANGE 108... 4-7 211... 4-7 315... 4-7 522... 4-7 HAMMERS 1 CONTENT COMPACT RANGE 108... 4-7 211... 4-7 315... 4-7 522... 4-7 RAMMER HITS FIRST The world s best-known and most-respected brand of hydraulic hammers offers a comprehensive range of powerful,

More information

HydrauliC breakers mb & Hb range. High efficiency & performance, low noise & vibration

HydrauliC breakers mb & Hb range. High efficiency & performance, low noise & vibration HydrauliC breakers mb & Hb range High efficiency & performance, low noise & vibration 1 Efficiency and performance you can rely on! We introduced the innovative hydraulic breaker 50 years ago And it transformed

More information

HYDRAULIC EXCAVATOR. ZAXIS-2 series

HYDRAULIC EXCAVATOR. ZAXIS-2 series ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code: ZX17U-2 Engine Rated Power: 11.0 kw (14.8 HP) Operating Weight: 1 750-2 020 kg Backhoe Bucket: ISO Heaped: 0.02-0.05 m 3 Versatile excavator with adjustable

More information

Pump Trailer Submersible PTS-60000

Pump Trailer Submersible PTS-60000 Pump Trailer Submersible PTS-60000 Technical specification Table of contents: 1. TECHNICAL DATA 2. GENERAL 3. ENGINE 4. FIRE PUMP 5. SUBMERSIBLE PUMPS 6. PIPING 7. OPERATING PANEL 8. LIGHTING AND ELECTRICAL

More information

Z E P P E L I N ZT400-P PILING

Z E P P E L I N ZT400-P PILING Z E P P E L I N ZT400-P PILING Heikantsestraat 15 4861 TH CHAAM The Netherlands P.O. Box 67 4860 AB CHAAM Tel. +31 (0)161 491 953 Fax +31 (0)161 491 952 Internet address: www.crane-house.com E-mail address:

More information

Grapple Loaders & Forest Trailers

Grapple Loaders & Forest Trailers Grapple Loaders & Forest Trailers Master Serie Choose a predefined combination or separate Loader and Trailer 1 2 3 4 HK 4170H MV 952K HK 3668H MV 952K HK 3267H MV 851 HK 25L MV 701 The profitable partner

More information

ET20. ET20 Big performance in a compact package

ET20. ET20 Big performance in a compact package ET20 Tracked Conventional Tail Excavators ET20 Big performance in a compact package The 2-tonne, ET20 excavator offers excellent performance and comfort in a compact package. The ET is a productive and

More information

TSi 150C SONIC DRILL RIG

TSi 150C SONIC DRILL RIG TECHNICAL INFORMATION Reno Business Park, 27825 State Route 7, Marietta, Ohio, USA 45750 Telephone: 1.740.374.6608 Fax: 1.740.374.6907 www.terrasonicinternational.com Copyright 2011 Terra Sonic International.

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

JAWMASTER TM SINGLE TOGGLE JAW CRUSHER

JAWMASTER TM SINGLE TOGGLE JAW CRUSHER JAWMASTER TM SINGLE TOGGLE JAW CRUSHER ROBUST CONSTRUCTION Within Sandvik we have more than a century of experience of designing and manufacturing jaw crushers. We also have a wealth of knowledge about

More information

Construction Planning, Equipment, and Methods

Construction Planning, Equipment, and Methods CHAPTER Construction Planning, Equipment, and Methods Sixth Edition DRILLING ROCK AND EARTH A. J. Clark School of Engineering Department of Civil and Environmental Engineering 12a By Dr. Ibrahim Assakkaf

More information

trenching the world Rotation Units Revolving Rotary Revolving cutting

trenching the world Rotation Units Revolving Rotary Revolving cutting Rotation Units Revolving Rotary Drum Cutters Revolving cutting technology BROADEN NEW HORIZONS erkat rotation units The ERU series from Erkat represents a new generation of rotation units specifically

More information

MORE CARE. BUILT IN. VOLVO EXCAVATOR. hydraulic hammers

MORE CARE. BUILT IN. VOLVO EXCAVATOR. hydraulic hammers MORE CARE. BUILT IN. VOLVO EXCAVATOR hydraulic hammers For extra-tough conditions, Volvo hammers deliver high impact Stubborn rock. Concrete debris. Frost-locked earth. These are the kinds of conditions

More information

AERIAL PLATFORM SPECIFICATIONS SPEC. SHEET No. AT-270-2/EX-30 MODEL AT-270TG MAX. BASKET BOTTOM HEIGHT 27.0 m BASKET EQUIPMENT BOOM ELEVATION ROTATION

AERIAL PLATFORM SPECIFICATIONS SPEC. SHEET No. AT-270-2/EX-30 MODEL AT-270TG MAX. BASKET BOTTOM HEIGHT 27.0 m BASKET EQUIPMENT BOOM ELEVATION ROTATION DATE September, 2012 TADANO AERIAL PLATFORM MODEL : AT-270TG (CARRIER : FC9JJLA) GENERAL DATA MAXIMUM WORKING HEIGHT 29.0 m MAXIMUM BASKET BOTTOM HEIGHT 27.0 m MAXIMUM BASKET LOADING CAPACITY 200 kg or

More information

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3

net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000

More information

Tesmec S.p.A. Tesmec USA Inc. Headquarters Via Zanica, 17/O Grassobbio (BG) - Italy Tel: Fax:

Tesmec S.p.A. Tesmec USA Inc. Headquarters Via Zanica, 17/O Grassobbio (BG) - Italy Tel: Fax: ROCKSAW 300 COMPACT ROCKSAW TRENCHER MACHINE SPECIALLY DESIGNED FOR FIBER-OPTIC PROJECTS IN URBAN AREAS. THIS MODEL FEATURES AN OFFSET DIGGING BACK-END, TILTING TRACK SYSTEM, AND - AS OPTIONAL- AN AUTOMATIC

More information

Pipe Cutting and Beveling Machines LCSF. Externally mounted portable pipe cutting and beveling system.

Pipe Cutting and Beveling Machines LCSF. Externally mounted portable pipe cutting and beveling system. Externally mounted portable pipe cutting and beveling system. Optional "Bridge Slide" for heavy wall pipe. Bevel, compound bevel and J prep. All "Low Clearance Split Frames" are designed for portability

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

MT52 MINI TRACK LOADER SPECIFICATIONS

MT52 MINI TRACK LOADER SPECIFICATIONS MT52 MINI TRACK LOADER SPECIFICATIONS DIMENSIONS 82.3 36.0 in. (914 mm) 54.9 in. (1394 mm) 95.4 in. (2422 mm) 49.6 71.3 in. (1810 mm) 18.2 in. (463 mm) 49.1 in. (1246 mm) 48.7 in. (1237 mm) 23 22 7.3 in.

More information

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés.

LM 55 UNDERGROUND coring DRill. Technical Overview. Copyright 2011 Boart Longyear. Tous droits réservés. LM 55 UNDERGROUND coring DRill Technical Overview Copyright 2011. Tous droits réservés. LM 55 MODULAR CORE DRILL Copyright 2011. All rights reserved. The LM 55 is a compact underground diamond coring drill

More information

VOLVO COMPACT EXCAVATORS ECR58 plus, ECR88 PLUS

VOLVO COMPACT EXCAVATORS ECR58 plus, ECR88 PLUS VOLVO COMPACT EXCAVATORS ECR58 plus, ECR88 PLUS The comfortable way to get into tight spaces. When your job takes you to an area where space is at a premium, turn to the Volvo ECR58 Plus and ECR88 Plus.

More information

Presentation of. factory at Segmon, Grums municipal.

Presentation of. factory at Segmon, Grums municipal. Presentation of factory at Segmon, Grums municipal. Office building Office building Office building Storehouse Space for annex Preparatory work with plinths for the extension of sheet metal building by

More information

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK

INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single

More information

Drilling fleet. Capabilities. Agriculture. Water. Environment.

Drilling fleet. Capabilities. Agriculture. Water. Environment. Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function

More information

URBAN SEARCH & RESCUE TOOLS RAPID, COMPACT AND LIGHTWEIGHT

URBAN SEARCH & RESCUE TOOLS RAPID, COMPACT AND LIGHTWEIGHT URBAN SEARCH & RESCUE TOOLS RAPID, COMPACT AND LIGHTWEIGHT Pneumatic Breaching Tool Kits Structural Collapse / Confined Spaces Drilling, Breaking and Breaching 080 Franklin Avenue Franklin Park, Illinois

More information

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS

TOOLS FOR THE SPECIALIST UNDERWATER TOOLS TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces

More information

OIL COOLING SYSTEMS AIR/OIL AND WATER /OIL HEAT EXCHANGERS THE FIRST COOLER DESIGNED AND BUILT FOR OIL COOLING IN CERAMIC INDUSTRY.

OIL COOLING SYSTEMS AIR/OIL AND WATER /OIL HEAT EXCHANGERS THE FIRST COOLER DESIGNED AND BUILT FOR OIL COOLING IN CERAMIC INDUSTRY. OIL COOLING SYSTEMS AIR/OIL AND WATER /OIL HEAT EXCHANGERS THE FIRST COOLER DESIGNED AND BUILT FOR OIL COOLING IN CERAMIC INDUSTRY. EASY TO INSTALL FULLY AUTOMATIC NO SPECIAL MAINTENANCE REQUIRED DESIGNED

More information

Hydraulic Control Solutions

Hydraulic Control Solutions Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district

More information

Portable Boring Bars

Portable Boring Bars Portable Boring Bars Who We Are One Company, Total Support, Complete Solutions Over many years, Hydratight has provided world-class bolted joint solutions and continues to set international standards in

More information

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR

303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR 303.5E2 CR, 304E2 CR, 305E2 CR, 305.5E2 CR Mini Hydraulic Excavators 303.5E2 CR 304E2 CR 305E2 CR 305.5E2 CR Engine Engine Model Cat C1.7 Cat C2.4 Cat C2.4 Cat C2.4 Net Power (ISO 9249) 17.5 kw (23.5 hp)

More information

Providing Answers For All Your Machine Tool Needs

Providing Answers For All Your Machine Tool Needs Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION

More information

CATALOGUE HYDRAULIC PUMPS. TAON ApS Tlf.:

CATALOGUE HYDRAULIC PUMPS. TAON ApS Tlf.: CATALOGUE HYDRAULIC PUMPS TAON ApS Tlf.: +45 24488480 E-mail: info@taon.dk www.taon-hydraulic.com Catalogue Hydraulic pumps Table of contents Piston pumps... 3 Variable piston pump... 3 A10V(S)O... 3 A4VSO...

More information

EXPORT PRICE LIST March 2016

EXPORT PRICE LIST March 2016 LIMITED EXPORT PRICE LIST March 2016 CONTENTS Page COMPLETE TESTER KITS Medium Duty s 2 Model 2050 Mid-Heavy Duty s 3 Model 2008 Heavy Duty s 3 Model 0095 Long Stroke 4 Model 0097 Tension Meter s 4 Universal

More information

ALFRA hydraulic manual punches

ALFRA hydraulic manual punches ALFRA hydraulic manual punches Up to 750 bar pressure Up to 138 x 138 mm square Up to 15 mm round Only 1.5 kg 5 Compact manual punch straight Compact manual punch straight for use in construction of switch

More information

Precision Machine Tools

Precision Machine Tools Precision Machine Tools Milling, grinding, Drilling, Turning & sawing Milling, Grinding, Drilling, Turning & Sawing from North America s leading brand Clausing Since 1911, Clausing Industrial has been

More information

Industrial Cutting Equipment. includes new Concrete Crusher

Industrial Cutting Equipment. includes new Concrete Crusher Industrial Cutting Equipment includes new Concrete Crusher LUKAS Industrial Cutting Equipment The demand for environmentally-friendly disposal and recycling of used or discarded products within highly

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

VOLVO WHEEL LOADERS BLOCK HANDLING

VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO WHEEL LOADERS BLOCK HANDLING VOLVO S BEEN AROUND THE BLOCK With Volvo on the job, moving large, heavy blocks quickly and effi ciently is easily done. That s because Volvo block handlers are specially

More information

AF 280 HYDRAULIC DRILL RIG

AF 280 HYDRAULIC DRILL RIG AF 280 HYDRAULIC DRILL RIG AF 280 1 THE PERFECT BLEND OF TECHNOLOGY AND PERFORMANCE The AF 280 is a drill rig that can easily overcome any kind of problem on the job site, even the most difficult ones.

More information

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³

PC 18MR. Mini-Excavator PC18MR-3. NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ PC 18MR Mini-Excavator PC18MR-3 NET HORSEPOWER 11,2 kw / 15 HP @ 2.600 rpm OPERATING WEIGHT 1.840-2.070 kg BUCKET CAPACITY 0,03-0,06 m³ Walk-Around The new PC18MR-3 compact mini-excavator is the product

More information

Nitrogen Gas Springs

Nitrogen Gas Springs THE INNOVATOR OF OUR INDUSTRY Nitrogen Gas Springs They truly are... Better by Design We have one of the Largest Selections of Gas Springs in North America DESIGN 2 -TITE - Extended & Expanded We are proud

More information

Product catalogue, pipe and sewer cleaning systems

Product catalogue, pipe and sewer cleaning systems Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes

More information

Operating Instructions Drill rig DRU160

Operating Instructions Drill rig DRU160 Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested

More information

Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series

Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series Cat Fusion Coupler System Wheel Loaders 938, 950, 962, 966, 972 H and K-series Features Improved Machine Performance Unsurpassed Durability Increased Visibility Wide Range of Job Site Solutions Benefits

More information

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the

More information

304C CR Mini Hydraulic Excavator

304C CR Mini Hydraulic Excavator 304C CR Mini Hydraulic Excavator Engine Model Mitsubishi S4Q2 Rated net power 31 kw 42 hp (ISO 9249) Weights Operating weight 4800 kg 10,582 lb with canopy Operating weight 4920 kg 10,844 lb with cab Weight

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

HCR. European series

HCR. European series HCR European series 1 INSIDE FURUKAWA Japan, a country of old traditions, has proven its highly technical performances in many different ways. Already, many years ago, Japanese electronic equipment contributed

More information

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle

DUGARD. Machine Tools Since CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle DUGARD Machine Tools Since 1939 CNC Turning and Milling Centres Dugard 52 Twin Turret SY - Twin Spindle Dugard 52 Triple Turret SY - Twin Spindle www.dugard.com Structure Design Assures Outstanding Stability

More information

Heavy Duty & Industrial Air Tools

Heavy Duty & Industrial Air Tools Heavy Duty & Industrial Air Tools Heavy-Duty Impacts with Magnesium Housing Tool Part Number 0 607 450 614 0 607 450 615 0 607 450 618 0 607 450 616 0 607 450 619 Drive end 3/8 square 1/2 square 1/2 extended

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

ARTI Bileme GRINDING & WELDING MACHINERY

ARTI Bileme GRINDING & WELDING MACHINERY UNIVERSAL TOOL GRINDER (Hydraulic Complete with PowerLock Unit) ARTI Bileme Universal Tool Grinding machine is designed specially to grind the tools used in window-door production and other types of cutter

More information

Atlas Copco Surface drill rigs. SmartRig ROC D65. Revolutionize your mining operation with us. Hole Diameter: mm (4 5 /16 8 )

Atlas Copco Surface drill rigs. SmartRig ROC D65. Revolutionize your mining operation with us. Hole Diameter: mm (4 5 /16 8 ) Atlas Copco Surface drill rigs SmartRig ROC D65 Revolutionize your mining operation with us Hole Diameter: 110 203 mm (4 5 /16 8 ) The mining mastermind. Brilliant and built to last. Surface mining equipment

More information

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg

21-1340-40. RPM Stall Torque Weight Free Speed ft lbs. Nm lbs. kg 21 Series 0.3 hp 0.22 kw 0.2 15.2 ft. lbs. 0.27 20.6 Nm Non-Reversible Rear Exhaust 21M1340-40 Spindle Rotation All models are right-hand rotation. To order left-hand rotation models (not reversible) substitute

More information

SPACIOUS CABIN TEMPERATURE TELESCOPIC

SPACIOUS CABIN TEMPERATURE TELESCOPIC THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

HYDRAULIC BREAKERS SB RANGE. A solid body, an innovative tool guiding system and a remarkable hydraulic design

HYDRAULIC BREAKERS SB RANGE. A solid body, an innovative tool guiding system and a remarkable hydraulic design HYDRAULIC BREAKERS SB RANGE A solid body, an innovative tool guiding system and a remarkable hydraulic design Solid productivity you can rely on! We introduced the innovative hydraulic breaker 50 years

More information

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile

ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB. company profile dredges catalogue ISO 9001 FM 537604 TAILOR MADE SOLUTION FOR HEAVY DUTY JOB company profile History Dragflow S.r.l. was born at the end of the 1980 s as a manufacturer of heavy duty submersible agitator

More information