PRESTOTIG. A full range of DC and AC/DC TIG welding inverters
|
|
- Flora Wheeler
- 7 years ago
- Views:
Transcription
1 PRSTOT full of and / T welding inverters
2 Welding inverters for carbon steel, stainless steel and aluminum compact of T welding inverters for carbon and stainless steel, and specially, for / T welding of aluminum. Protected against dust by their shielded front panel, the new PRSTOT units will accompany you in all your operations both in the workshop and on outside sites. Selection criteria egend: mini at 60 % (40 ) maxi Primary power supply Weldable materials and thicknesses* Welding current ooling unit Weight Steels luminum MM welding Product name Single-phase at 3 mm no 16,5 kg 4 PRSTOT 210 Three-phase at 4 mm optional 22 kg 4 PRSTOT 310 / 310 W Three-phase at 6 mm standard 33 kg 4 PRSTOT 410 W Single-phase at 3 mm at 4 mm no 30 kg 4 PRSTOT 210 / Three-phase at 4 mm at 5 mm no 39 kg 4 PRSTOT 250 / Three-phase at 4 mm at 5 mm standard 65 kg 4 PRSTOT 250 W / Three-phase at 6 mm at 8 mm standard 74 kg 4 PRSTOT 350 W / * for information and according to assembly preparation Main advantages or operator comfort: or MM welding (+, -, ): utomatic hot start for easier Reduced weight and size. arc striking according to type Maximum safety with electrode bias of coated electrode used. djustable arc dynamics ncreased user-friendliness with to optimize melting according controls grouped on the front to electrode type panel, parameters To meet your T welding (rutile, basic or cellulosic). memorization (/), unit requirements: transportable using carriages Multi-process units: T or, T1, T2 and T2. T, electrode. Possibility to connect to a - continuous, spot, pulsed welding. or working in difficult remote control or foot-operated - full welding cycle. conditions: pedal. - or lift-t arc striking system. igh-resistance steel cabinet, Separate gas to torch in : balance adjustment, protection against dust and connection. Torch with cleaning/penetration, welding with cerium electrodes (pointed) or pure spatter. potentiometer as tungsten electrodes (balling an option (). adjustment). pulsed system adjustment on front panel of the power sources, engine 2 generator compatibility.
3 up to You will find the right choice for your application in the PRSTOT : 200, 300 or 400 amps, air or water-cooling depending on model. our versions with a unique and very intuitive front panel will make you operational very quickly, whatever the PRSTOT you choose. or T welding vailable in 4 versions with reduced weight and electric generator compatibility (if you do not have a power source available on site), each of our PRSTOT offers the same welding quality with a unique and intuitive front panel grouping all the controls necessary for optimum execution of your welding operation Power on indicator Thermal safety indicator Supply voltage defect indicator Pulsed T / Synergic pulsed T / Spot T selection Post-gas adjustment Welding parameter adjustment isplay Welding parameters selection keys 2T / 4T selection MM welding selection ocal/remote control selection djustment of arc striking and end of welding current Technical characteristics: 1 PRSTOT PRSTOT PRSTOT 310 W 4 PRSTOT 410 W 3 Primary power supply 230 V (+/-10%) single-phase 400 V (-15% / +20%) three-phase 400 V (-15% / +20%) three-phase bsorbed power at maximum intensity 6.5 kv 8.4 kv 13.8 kv No-load voltage 80 V 80 V 80 V djustment 5 to to to 400 uty cycle (T) at 100 % (at 40 ) at 60 % at 30 % Max. diameter for coated electrodes 4.0 mm 5.0 mm 6.0 mm imensions ( x w x h) 410 x 180 x 390 mm 500 x 180 x 390 mm 499 x 180 x 650 mm 500 x 180 x 650 mm Net weight 16.5 kg 22 kg 32 kg 33 kg Protection class P 23 P 23 P 23 Standards N ;-10 N ;-10 N ;-10 Welding cycles 2T - 4T - spot Welding cycle functions Pre and post-gas, arc rise and fading ramps with settings, electrode welding, T, pulsed T and synergic pulsed T
4 and up to n addition to work on carbon and stainless steels, the major development of aluminum use in industry requires high-performances and multipurpose equipments, not only for maintenance operations but also for different welding applications in manufacture. wide, simple, high-performance vailable in 4 versions, from 200 to 350 amps, air or water-cooled, the new PRSTOT / will allow you to handle all welding situations including the most delicate ones. unique and very user-friendly front panel has the capacity for you to store up to 9 complete welding programs. Power on indicator Thermal defect indicator Supply voltage defect indicator ocal/remote control selection and code locking Welding parameters adjustment ading time adjustment T / T Pac-sytem arc striking selection balance parameters adjustment T spot weld adjustment 2T / 4T selection MM welding selection Parameters memorization PRSTOT 210 / 6 PRSTOT 250 / 7 PRSTOT 250 W / 8 PRSTOT 350 W / 230 V (+/-10%) single-phase 230/400/460 V (+/-10%) three-phase 400 V (+/-10%) three-phase 6.8 kv 7.5 kv 11.7 kv 70 V 70 V 70 V 3 to 200 () - 10 to 200 () 3 to 250 () - 10 to 250 () 3 to 350 () - 10 to 350 () (70%) mm 5.0 mm 5.0 mm 540 x 260 x 510 mm 690 x 260 x 550 mm 690 x 260 x 830 mm 690 x 260 x 870 mm 30 kg 39 kg 65 kg 74 kg P 23 P 23 P 23 N ;-10 N ;-10 N ;-10 2T - 4T - spot Pre and post-gas, arc rise and fading ramps with settings, memorization of 9 programs, and electrode welding (+/- polarity), T, pulsed T
5 T Our PRSTOT welding units are delivered complete, with or without cooling unit. They can be complemented by a carriage, a pressure regulator and a torch, all available in the form of a ready-to-use package. remote control or foot-operated control pedal can be supplied as options for your PRSTOT unit. To order PRSTOT PRSTOT / W 410 W W 350 W Power source part number W W W W W W W W OORT - - uilt in uilt in Part number of package* (including power source + W W W W W W W W torch + pressure regulator) with trolley with trolley with trolley with trolley dd-ons Trolley W W W Remote control W W oot-operated control pedal W W QUOW pressure regulator-flowmeter Tungsten or cerium electrodes diam. 2.0 mm W diam. 2.4 mm W diam. 3.2 mm W Our PRSTOT are delivered with: 1 x 3-meter power supply cable (with 16 plug for single-phase models) 1 x 3-meter earth cable with earth clamp 1 x 1.5-meter gas hose + intermediate connection 1 x user and maintenance manual dd-ons: Remote control R1 for PRSTOT W Remote control R2 for PRSTOT / W Pure tungsten electrode QUOW pressure regulator-flowmeter with preset flow rate at. no Mask UROUX T VN at. no. W (version 3 000) at. no. W (version 4 000) erium electrode We recommend the use of cerium electrodes for better penetration in angles for aluminum welding (). of 3 T carriages for easy transport of: PRSTOT unit, according to model OORT cooling unit () as bottle (size 20 max.) Torches and accessories that can be carefully stored or rolled 3 models of carriage to make your PRSTOT transporting and storing easier: T1 for PRSTOT units T2 for PRSTOT 210 / units T2 for other PRSTOT / models PROT maintenance box at. no (PROT 10 RS) at. no (PROT 20 RS) oot-operated control pedal P1 for PRSTOT at. no. W oot-operated control pedal P2 for PRSTOT / at. no. W T T2 T * or rench market 5
6 ontacts R QU WN RN 13 rue d'pluches P Saint Ouen l'umône ergy Pontoise édex - rance Tél. : ax : or other countries please contact our xport departments W taly xport epartment Via Torricelli15/ Verona - taly Tel.: ax: W rance xport epartment 13, rue d'pluches - P Saint Ouen l'umône ergy-pontoise edex - rance Tel.: ax: ir iquide Welding rance reserves the right to carry out modifications to its machinery without prior notice. The manufacturer accepts no liability for illustrations, descriptions and characteristics, which are for information only. ounded in 1902, ir iquide is the world leader in industrial and medical gases and related services. The company has offices in 70 countries and employs a work force of 35,900. rawing on constantly renewed technologies, ir iquide develops groundbreaking solutions used in making countless everyday products and in helping to preserve life. W W S 01 d. 1 Q : 2284 Photos W : SR
SMARTY 160 POWER page 4-5 SMARTY 180 / 220 XL page 4-6 SMARTY TX 250 page 4-7. SMARTY TX 160 Alu page 4-8 SMARTY TX 220 Alu page 4-9
CHAPTER TIG welding Introduction pages - & - WELDING POWER SOURCES DC power sources SMARTY 60 POWER page -5 SMARTY 80 / 0 XL page -6 SMARTY TX 50 page -7 AC/DC power sources SMARTY TX 60 Alu page -8 SMARTY
More information2350-011. Chapter 2 TIG welding
350-011 Chapter TIG welding TIG welding TIG welding overview and selection guide Scheme of a manual installation for TIG welding Helmet/mask Protective clothing Filler metal rod Earth clamp Fume extraction
More informationKemppi Mastertig MLS 2500 and 3500. Welding Versatility for Professionals
Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals Kemppi Mastertig MLS 2500 and 3500 Welding Versatility for Professionals The Mastertig MLS 2500 and 3500 offer outstanding TIG performance
More information2350-012. Chapter 3 MIG/MAG welding
250-012 Chapter MIG/MAG welding 2000-489 MIG/MAG welding The transfer of metal Torch Nozzle Contact tip Gaseous protection Molten metal Electrode wire Weld bead MIG/MAG welding overview and selection guide
More informationCITOTIG II DC Industrial range
CITOTIG II DC Industrial range The best of TIG welding using inverter technology for the most demanding welders. www.oerlikon-welding.com CITOTIG II DC Industrial range Single or three-phase portable inverters
More informationOPTIMAG. MIG/MAG welding equipment with OPTI system. Simplicity and productivity. www.saf-fro.com 2008-036 2008-202
OPTIMAG MIG/MAG welding equipment with OPTI system. Simplicity and productivity. 008-0 008-036 www.saf-fro.com OPTIMAG range and opti system 1881-047 MIG/MAG welding equipment designed for heavy-duty quality
More informationTypical TIG-plasma solutions
Typical -plasma solutions 2228-005 2003-670 Boilers maker solutions 2004-257 1210-064 1210-067 64 3638-008 2008-400 1415-014 2000-169 2003-204 1467-003 2000-343 2000-160 Pipework solutions or plasma welded
More informationSection 2 - TIG welding General information and choice criteria
Section 2 - TIG welding General information and choice criteria 0255-029 2000-173 3551-046 Scheme of a manual installation for TIG welding Filler wire Welding torch Regulator flowmeter Remote control for
More informationTIG torches... 3-2 to 3-5 Tungsten electrodes... 3-6 to 3-7 TIG consumables... 3-8 Miscellaneous... 3-9
3- welding torches........................................................... 3-2 to 3-5 Tungsten electrodes........................................ 3-6 to 3-7 consumables........................................................
More informationSquare Wave TIG 200 TIG WELDING MACHINE
Square Wave TIG 200 TIG WELDING MACHINE Simplicity Without Compromise The Square Wave TIG 200 is a portable TIG and stick welding machine that lets hobbyists, makers, small fabricators and craftsmen explore
More informationMaster catalogue arc equipment
Master catalogue arc equipment MMA - TIG - MIG/MAG - Plasma cutting Master catalogue arc equipments 2008 / 2009 www.oerlikon-welding.com 2006-93 2008-204 2008-205 2008-206 OERLIKON is part of the Air Liquide
More informationV3.2-12-2013 PREFAB WELDING PREFAB WELDING
SP121 ø12 - ø121 mm ø0,45 to ø4,5 '' Technical Specifications - Basic stainless steel jaws Ø 1 to 4,5 ( Ø 24 to Ø 121 mm ) - Additional stainless steel jaws Ø 0,45 to 4,25 (Ø12 to Ø108mm) - Electric rotation
More informationYEAR/MODEL ANNÉE/MODÈLE BODY SHOP WELDING EQUIPMENT
YEAR/MODEL ANNÉE/MODÈLE DATE OF ISSUE DATE EN VIGUEUR BULLETIN NUMBER NUMÉRO DU BULLETIN Body Repair News ALL APRIL 15, 2014 BRN-14-1 BODY SHOP WELDING EQUIPMENT DISCLAIMER: This publication provides details
More informationSAFMIG BLX. Digital controlled MIG/MAG step machines. Complete range of intelligent step controlled semi-automatic equipment. www.saf-fro.
SAFMIG BLX Digital controlled MIG/MAG step machines. Complete range of intelligent step controlled semi-automatic equipment. 000-84 006-36 www.saf-fro.com SAFMIG BLX: over 40 years of excellent servic
More informationThe TransCut 300 plasma cutting system - Plasmacutting with liquid working medium
The TransCut 300 plasma cutting system - Plasmacutting with liquid working medium Speaker Sector Company Street Town Excellent portability with the TransCut 300 plasma cutting system Compact, portable
More informationwilkinsonstar.com TIG 200P DC Pulse TIG / MMA Welding - Dual voltage Order code JT-200PDV OPERATOR MANUAL
wilkinsonstar.com TIG 200P DC Pulse TIG / MMA Welding - Dual voltage Order code JT-200PDV OPERATOR MANUAL Your new product Thank you for selecting this Jasic Technology, Wilkinson Star product. This product
More informationA Beginner s Guide to TIG Welding
A Beginner s Guide to TIG Welding TIG Welding Names TIG Welding, or TIG, is an acronym for Tungsten Inert Gas welding. TIG is a commonly used and accepted slag term. The proper terminology is Gas Tungsten
More informationAristo robot package STANDARD MIG ROBOTIC WELDING COMPONENTS FOR FIELDBUS COMMUNICATION XA00125020. TrueArcVoltage TM System inside
Aristo robot package STANDARD MIG ROBOTIC WELDING COMPONENTS FOR FIELDBUS COMMUNICATION TrueArcVoltage TM System inside XA0000 ESAB has been working with robotic welding for many years. This is why you
More informationPRESTOTIG PFC / PRO Professional range
PRESTOTIG PFC / PRO Professional range Portable TIG DC welding installations www.saf-fro.com PRESTOTIG DC PFC / PRO Professional range PRESTOTIG DC Professional offers leading technology in TIG DC welding
More informationPlasma / TIG machine range
Plasma / TIG machine range The PLASMA/TIG solutions are often used to weld vessels or pipes in various domains as food, transport, petrochemical or aeronautical industries. Air Liquide Welding proposes
More informationWORD DEFINITION WORD (NATIONAL LANGUAGE)
WELDING GLOSSARY The Glossary has been created as part of the Migration for Development in the Western Balkans (MIDWEB) project, which received financial assistance from the European Commission IPA 2009
More informationINTELLIGENT ENERGY ICHARGER & IDCHARGER
INTELLIGENT ENERGY ICHARGER & IDCHARGER www.cemont.com MICROPROCESSOR UNIVERSAL AUTOMATIC INTELLIGENT BATTERY CHARGERS WITH INVERTER TECHNOLOGY SAFE Will not damage your car s onboard electronics FAST
More informationChapter 5 - Aircraft Welding
Chapter 5 - Aircraft Welding Chapter 5 Section A Study Aid Questions Fill in the Blanks 1. There are 3 types of welding:, and, welding. 2. The oxy acetylene flame, with a temperature of Fahrenheit is produced
More informationUNI FLAME AUTOLIFT MIG/MMA/TIG. 165/190/220/250 Inverter Manual. 240 Volt. Standard MIG / MAG
UNI FLAME AUTOLIFT MIG/MMA/TIG 165/190/220/250 Inverter Manual 240 Volt Standard MIG / MAG UNI FLAME AUTOLIFT 2YEARS Warranty * Machine Model Description Part Number MIG/MM/TIG Inverter KUMJR165 / 190
More informationTIG INVERTER INSTRUCTION MANUAL
TIG INVERTER INSTRUCTION MANUAL Contents Warning General Description Block Diagram Main Parameters Circuit Diagram Installation and Operation Caution Maintenance Spare Parts List Troubleshooting 3 4 4
More informationPAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation
MASTERXL PLUS- Air Plasma Cutting Systems 3 Year Warranty PakMaster 50XL PLUS-CE GENUINE CUT 12.7mm ( 1 2 ) SEVERANCE CUT 19.1mm ( 3 4 ) PakMaster 75XL PLUS-CE GENUINE CUT 19.1mm ( 3 4 ) SEVERANCE CUT
More informationTBi Industries. MIG / MAG Welding torches TBi Expert 0. 1
TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240
More informationSVENSKA.......................................................3 DANSK.........................................................10 NORSK................
Caddy 150 & Caddy Tig 150 LHQ 150, LTV 150 SVENSKA.......................................................3 DANSK.........................................................10 NORSK.........................................................17
More informationSTT -10 WIRE FEEDER. For Surface Tension Transfer TM. Process
STT -10 WIRE FEEDER For Surface Tension Transfer TM Process STT -10 WIRE FEEDER ADVANTAGE LINCOLN The STT-10 does a lot more than just feed wire. This new generation microprocessor controlled wire feeder
More informationESAB Swift Arc Transfer TM MAG welding at very high travel speed
ESAB Swift Arc Transfer TM MAG welding at very high travel speed The ultimate high productivity process. STRENGTH THROUGH COOPERATION ESAB Swift Arc Transfer (SAT TM ) ESAB Swift Arc Transfer (SAT TM )
More informationBMW Service Special tools and equipment New spot welding machine Multispot MI-100control BMW/MINI
Geschäftsleitung Management Service/Beratung Service/Reception Werkstatt Workshop Gewährleistung Warranty Teile und Zubehör Parts and Accessories Verkauf Sales Verantwortlich/Responsible: VS-14/Beyser
More informationTIG WELDING TIPS by Tom Bell
(This is a two-part document, with general tig welding first followed by one aluminum-specific.) TIG WELDING TIPS by Tom Bell 1. The bigger the rod, the easier it is to feed. Use larger diameter rods (3/32
More informationPlasma and TIG processes. Automatic welding applications
Plasma and TIG processes. Automatic welding applications Performance and high productivity in boiler and pipe work. 2003-665 www.airliquidewelding.com Plasma and TIG processes used in automatic applica
More informationGeneral Guidelines for Building Aluminum Production Injection Molds
General Guidelines for Building Aluminum Production Injection Molds Using 7000 series Aluminum Mold Plate By David Bank Aluminum Injection Mold Company Rochester, New York 1 Introduction This high strength
More informationWelding Equipment. Welding Equipment Catalog
Weldg Equipment Weldg Equipment Catalog WELDING SOLUTIONS 2014 Weldg Equipment ACC ACCESSORIES Table of contents Conectable to Generators with imum of 1.5 times the absorbed power of weldg mache. 4 St
More informationWelding & Cutting Solutions. 2016 Equipment Catalog
Welding & Cutting Solutions 2016 Equipment Catalog TABLE OF CONTENTS Icons and Warranty Information... 2 Stick Welders... 3-10 TIG Welders... 11-20 MIG: Wire Feeder/Welders... 21-30 MIG & FCAW: Industrial
More informationPRESTOTIG 240 & 310 AC/DC
PRESTOTIG 20 & 310 AC/DC TIG AC/DC machine for welding specialists www.saf-fro.com PRESTOTIG AC/DC PRESTOTIG AC/DC machines are designed to meet the expectations of the most demanding welders. Optimum
More informationAN INTRODUCTION TO TIG WELDING. wws group support@weldability.com
AN INTRODUCTION TO TIG WELDING wws group suppt@weldability.com WARNING: This document contains general infmation about the topic discussed herein. This document is not an application manual and does not
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationCutMaster 82. 6.04 Major External Replacement Parts
CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080
More informationVIROSAF POSISAF. Rotators and positioners for manual and automatic welding applications.
VIROSAF POSISAF Rotators and positioners for manual and automatic welding applications. Rotators and positioners: improved handling means improved welding. SAF positioning equipment adapts to the welding
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationA Beginner s Guide to MIG Welding
A Beginner s Guide to MIG Welding MIG Welding Names MIG welding, or MIG, is an acronym for Metal Inert Gas welding. MIG is a commonly used and accepted slang term that was appropriate when the process
More informationGas tungsten arc welding, commonly called TIG (tungsten inert gas), produces an arc between a
DESIGN CONSIDERATIONS FOR WELDING Apart from resistance spot welding (RSW), three processes are most commonly used for welding metal stampings and fabrications: gas metal arc welding (GMAW) or MIG; gas
More informationA COMPARISON OF AC TO INVERTER DC RESISTANCE SPOT WELDING AND THE EFFECTS ON DUAL-PHASE 600
A COMPARISON OF AC TO INVERTER DC RESISTANCE SPOT WELDING AND THE EFFECTS ON DUAL-PHASE 600 Kurt Hofman, Mike Soter, Charles Orsette, Shawn Villaire, and Matt Prokator RoMan Engineering Services Inc. Abstract
More informationGK Packing System Welding Instructions
GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions
More informationDRM75A 230V 20/100A DIN rail single phase two wire energy meter
DRM75A 230V 20/100A DIN rail single phase two wire energy meter 1.1 Safety instruction 1.2 Foreword 1.3 Performance criteria 1.4 Specifications 1.5 Basic errors 1.6 Description 1.7 Dimensions 1.8 Installation
More informationPipeWorx Welding System
PipeWorx Welding System Issued August 014 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes
More informationOVR-3SP Recloser with PCD Control Style Guide 1VAL263901-SG March 30, 2009 Revision B
OVR-3SP Recloser with PCD Control Style Guide 1VAL263901-SG March 30, 2009 Revision B The OVR-3SP three-phase recloser style guide aids in the proper selection of your OVR-3SP style number. The OVR-3SP
More informationThe solution for Europe: Type 2 charging socket with or without shutter
The solution for Europe: Type 2 charging socket with or without shutter The charging socket for the Europe plug. Now also with shutter. Europe needs a standardised charging connection for electric vehicles.
More informationPlasma range PRESTOJET / PLASMAJET
Plasma range PRESTOJET / PLASMAJET A complete range of installations for manual plasma cutting and gouging 008-0 www.saf-fro.com The plasma expert 00-090 00-00 00-89 00-0 The plasma process Principles
More informationAWELD160. ARC Welder w/thermal Overload Assembly & Operating Instructions
AWELD160 ARC Welder w/thermal Overload Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationESAB MIG/MAG Robot packages Yaskawa Motoman
ESAB MIG/MAG Robot packages Yaskawa Motoman MA 1400 & 1900 with Aristo W8 2 Anybus Devicenet Processes used in robotic welding include: MIG/MAG MIG/MAG pulse MIG/MAG SuperPulse Short arc / pulse Pulse
More informationRailtrac 1000. A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere
1000 A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere 1 SAB Flexible answer to stiff requirements is a system of components that can be
More informationVarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2. MIG/MAG welding
VarioSynergic 3400 / 4000 / 5000 VarioSynergic 3400-2 / 4000-2 / 5000-2 MIG/MAG welding A high-calibre machine that s user-friendly, too. GENERAL REMARKS UTILISATION It s got the lot The VarioSynergic
More informationNetworking Cabinets > Part No Capacity Available Colors Height(mm) Width(mm) Depth(mm)
Wall Mount Cabinets Link IT Single Sided Wall Mount Cabinets Welded frame, reliable structure Standing or wall mounting installation Easy mounting installation 19 standard installation Removable side panels,
More informationECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
More informationEML 2322L MAE Design and Manufacturing Laboratory. Welding
EML 2322L MAE Design and Manufacturing Laboratory Welding Intro to Welding A weld is made when separate pieces of material to be joined combine and form one piece when heated to a temperature high enough
More informationLED LEONARDO 120 W. LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature
LED LEONARDO 120 W LED Fresnel SPOTLIGHT White light, either Tungsten or Daylight balanced Correlated Color Temperature OVERVIEW The LED LEONARDO 120W is a highly efficient Fresnel lens spotlight using
More informationPS07572. ARC Welder Assembly & Operating Instructions
PS07572 201107 ARC Welder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every
More information8.2 FUSION WELDING. Types of welding processes. Oxyfuel gas welding
Valery Marino, Manufacturing Technology Fusion Welding 153 8.2 FUSION WELDING Types of welding processes Welding is a material joining process for a permanent combining of two (or more) parts that inoles
More informationElectric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
More informationFastMig M A new breed of industrial workhorse
FastMig M A new breed of industrial workhorse Proven reliability from the top of the welding technology Top welding performance for industrial MIG/MAG welding. Welding machine with various configurations
More informationLED...A70..4-..Q Series Sealed High-Intensity
LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for
More informationSolar Hot Water Heaters
Solar Hot Water Heaters Three High Vacuum Water inlet Stainless Steel screw Gel seal and insulation Water outlet Dust proof seals Non Pressure Models Details ASWH-1b ( Color Painted 304 ) ASWH-1c ( stainless
More informationOverview on Welding and Ergonomics
Jannuary, 30-2014 Overview on Welding and Ergonomics Luca Costa srl, Italy luca.costa@iisprogress.it Approaching ergonomics in welding fabrication Welding fabrication involves several operations which
More informationAristotig 255 AC/DC DTE 255. Instruction manual
Aristotig 255 AC/DC DTE 255 Instruction manual 0457 784 201 GB 031110 Valid for serial no. 810 to 246 1 DIRECTIVE........................................................ 3 2 SAFETY...........................................................
More informationQuick Connect. quick - simple - efficient. www.g-mw.de
Quick Connect quick - simple - efficient www.g-mw.de Phone: +49 9103 7129-0 Fax: +49 9103 7129-207 Innovative connection technology to plug three single-phase current transformers to multifunctional power
More informationEDM Drilling Power. start
EDM Drilling Power Three models and endless possibilities. Mitsubishi Electric.... 5 Highlights... 7 Design.... 9 Simple operation.... 11. Practical and well thought out.... 13 Service... 15 Key data...
More information5-Other arc welding WELDING TOOLS AND ACCESSORIES
WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...
More informationOVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F
OVR Three-Phase Recloser and PCD Control Style Guide 1VAL264001-SG October 13, 2009 Revision F The OVR three-phase recloser style guide aids in the proper selection of your OVR three-phase style number.
More informationEuropean Welding Standards
European Welding Standards John Dyson 15 th March 2004 European Standards Harmonised Standards Not all EN Standards are Harmonised, only those that are considered to satisfy relevant ESRs in product directives.
More informationCITOTIG 240 & 310 AC/DC
CITOTIG 20 & 310 AC/DC TIG AC/DC machine for highly demanding welding specialists www.oerlikon-welding.com CITOTIG AC/DC CITOTIG AC/DC machines are designed to meet the expectations of the most demanding
More informationMaxstar TIG/Stick Welding
00 Series Issued February 001 Index No. DC/ Maxstar TIG/Stick Welding Power Source Quick Specs Heavy Industrial Applications Petro/Chem Fabrication Aerospace Food/Beverage Industry Mechanical Contractors
More informationIn the previous presentation, we discussed how x-rays were discovered and how they are generated at the atomic level. Today we will begin the
In the previous presentation, we discussed how x-rays were discovered and how they are generated at the atomic level. Today we will begin the discussion on the major components of the x-ray machine. Today
More informationPAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
More informationEncoder WDGI 58H. www.wachendorff-automation.com/wdgi58h
Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationBAHAUDDIN ZAKARIYA UNIVERSITY, MULTAN.
BAHAUDDIN ZAKARIYA UNIVERSITY, MULTAN. RE-TENDER TENDER DOCUMENT For LAB EQUIPMENTS FOR THE INSTITUTE OF ADVANCED MATERIALS Last Date of Submission: 29.02.2016 BAHAUDDIN ZAKARIYA UNIVERSITY, MULTAN www.bzu.edu.pk
More informationMACHINES FOR REFRIGERATION AND AIR CONDITIONING
00 MA0900 MACHINES FOR REFRIGERATION AND AIR CONDITIONING The widespread use of air conditioning systems, both civil and industrial, in order to increase the comfort at work and at home, as well as the
More informationDurmazlar has aimed continous development since 1956
Head Quarter & Ataevler Durmazlar has aimed continous development since 1956 Owes one of the world s most contemporary production plants in the production technology business.3 different plants oriented
More informationWELDING & CUTTING MAIN EQUIPMENT
GASES DIVISION GAS WELDING & CUTTING EQUIPMENT WELDING & CUTTING MAIN EQUIPMENT GAS WELDING & CUTTING KIT The MARIGASES GAS WELDING AND CUTTING KIT is a high quality set containing all the tools and components
More informationEncoder WDG 58B. www.wachendorff-automation.com/wdg58b
Encoder WDG www.wachendorffautomation.com/wdgb Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions Maximum
More informationAPPLICATIONS. Semiautomatic Automation Hard Automation Heavy Equipment Transportation Fabrication FEATURES, CONT D. UNIT REQUIRES
ADVANCED PROCESS WELDERS Power Wave Processes Stick, TIG, MIG, Pulsed MIG, Flux-Cored, Tandem MIG, Carbon Arc Gouging Product Number K3279-1 Power Wave S700 S700 Input Power 380-415/440-460/500/575/3/50/60
More informationINTRODUCES MERLIN 1000 MAXIMUM FLEXIBILITY MAXIMUM PERFORMANCE MAXIMUM PARTS LIFE. Literature # 0-2721 09-Dec-98
INTRODUCES MERLIN 1000 MAXIMUM FLEXIBILITY MAXIMUM PERFORMANCE MAXIMUM PARTS LIFE Literature # 0-2721 09-Dec-98 DAVID R. ROUTHIER AUTOMATION SPECIALIST November 9, 1998 THERMAL DYNAMICS CORPORATION INDUSTRIAL
More informatione 2 ALPHA Medium Voltage Switchgear Data Sheet K-1.1.2 EN
e 2 ALPHA Medium Voltage Switchgear Data Sheet K-1.1.2 EN We create ideas with power! ELEKTROMETAL ENERGETYKA SA is a new Polish company providing solutions for electrical power engineering. Our services
More informationCRISTAL F 119 - F 208
CRISTAL F 119 - F 208 A new generation of seamless flux cored wires The future of welding is clear RL00537R 2006-204 www.oerlikon-welding.com CRISTAL F, a new generation of flux cored wires 3534-053 Our
More informationPROTIG NG. Manual TIG Welding Torches. www.saf-fro.com
NG Manual TIG Welding Torches www.saf-fro.com New range Round handle series (RL), designed for worksite applications. Easy to handle, and easy to maintain. These classic round handled TIG torches have
More informationULTRASONIC THICKNESS GAUGE TT100/110/120/130
ULTRASONIC THICKNESS GAUGE TT100/110/120/130 TT100 TT110 Portable size and easy operation Suitable for any metallic and non-metallic materials ultrasonic can go through Self-compensating of nonlinearity
More informationThe ARPEGE range. Optimising storage of samples in vials or straws. www.dmc.airliquide.com
The range Optimising storage of samples in vials or straws www.dmc.airliquide.com The range New range of medium capacity containers, units are used for keeping small-sized biological products. They are
More informationGENERAL INFORMATION ORDERING INFORMATION
GENERAL INFORMATION Lenco 2 THE LENCOSPOT MARK II Autobody Dual-Spot Welder Offers All These Features: Protected Control Panel Streamlined Construction On/Off Indicating Switch Solid State Timer Tool Storage
More informationRISH EM 3490 DS Dual Source Energy Meter RISH EM 3490 DS. Application : Product Features:
Application : RISH Master 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network & replaces the multiple analog
More informationCK Worldwide, Inc. How To Use Your New Flexible Purge Chamber TABLE OF CONTENTS:
CK Worldwide, Inc. How To Use Your New Flexible Purge Chamber TABLE OF CONTENTS: Safety Guidelines... Warranty... Introduction... Description... Specifications... Check list... Optional items... Suggestions...
More informationCOOLSIDE box R410A. conditioned server - racks for direct installation into the room INVERTER E C
COOLS conditioned server - racks for direct installation into the room COOLSIDE box INVERTER R410A E C 2 COOLSIDE box GENERAL FEATURES COOLSIDE BOX is a split system consisting of an outdoor motocondensing
More informationOPERATION MANUAL INFRARED THERMOMETER
OPERATION MANUAL INFRARED THERMOMETER Features: Precise non-contact measurements Built-in laser pointer Automatic selection range and Resolution to 0.1ºor 1º / switchable button Automatic Data Hold & Auto
More information