Trend and Challenges for MEMS Packaging 天水华天科技股份有限公司 于大全

Size: px
Start display at page:

Download "Trend and Challenges for MEMS Packaging 天水华天科技股份有限公司 于大全"

Transcription

1 Trend and Challenges for MEMS Packaging 天水华天科技股份有限公司 于大全 July TianShui HuaTian Technology CO., Ltd

2 Outline of Presentation Development of MEMS MEMS Packaging Trend and Challenges MEMS Packaging of HuaTian Summary 2 HuaTian Technology (XI AN) CO., Ltd

3 MEMS & Sensors in Smartphones 3 HuaTian Technology (XI AN) CO., Ltd

4 MEMS & Cellphones 4 HuaTian Technology (XI AN) CO., Ltd

5 Some of the Things Things and Sensors Inertial Sensors Magnetic Sensors Pressure Sensors Temperature Sensors MEMS Microphone Sensors Smart meters v v v Smart pills v v v Wearables v v v v v v Engine control units v v Anti-lock braking systems Airbag control modules Digital cameras(stills and camcorders) Security cameras Automotive GPSs v v v v v v Printers v v Elderly person monitors/alarms v v Video game consoles Tire pressure monitoring systems Portable media players v v v Toys v v v Video game handheld devices Blood pressure sensors, E-readers v v * This includes sensors such as those for measuring humidity and detecting gas v v v Other Sensors 5 HuaTian Technology (XI AN) CO., Ltd

6 Market of lot According to Gartner, The IoT will include 26 billion units of "things" installed by Furthermore, there will be 10 billion units of things shipped in 2020 alone. Mobile phones, tablets and PCs are not considered. With wearables which are examples of the more visible things in the IoT the volumes are currently very small (less than 50 million units) and are expected to reach about 200 million units by A potential market of nearly $300 million. However, most importantly, the IoT in 2020 will be a very highly fragmented market and there will be no one dominant end application for sensors. But, there will be many different applications using sensors in low volumes, at least not in the volumes we have seen with smartphones. Per Strategy Analytics, the demand for automotive sensors will grow at 6.8% CAGR between 2012 and 2017, rising from $16.9 billion to $23.5 billion. Safety system growth is the largest driver of sensor growth through HuaTian Technology (XI AN) CO., Ltd

7 Outline of Presentation Development of MEMS MEMS Packaging Trend and Challenges MEMS Packaging of HuaTian Summary 7 HuaTian Technology (XI AN) CO., Ltd

8 MEMS Packaging Requirements (1) MEMS devices are more demanding on packaging than ICs due to their mechanical function, environmental interaction, and the applications. Specialized interface with the outside world and exposure to corrosive gases or fluids such as pressure sensors, fluidic devices Vacuum packaging, hermeticity Protection from moisture-sensitive capacitive devices will get signal errors High-temperature operation, such in-cylinder pressure sensors operating at 1000C Challenging assembly processes, such as wire bonding to vertical surfaces Sensitivity to vibration and shock during processing steps such as grinding or pick and place 8 HuaTian Technology (XI AN) CO., Ltd

9 MEMS Packaging Requirements (2) The type of MEMS product dictates the specific packaging requirements; even the same MEMS device could require different packaging for different markets including military, avionics, industrial process control. Automotive, medical, and consumer. Mechanical devices, such as accelerometers, gyroscopes, pressure sensors, microphones, resonators, and valves Optical devices such as mirrors, spectrometers, gas chromatographs, displays Fluidic devices such as reactors, pumps, filters, separators Bio/nano devices (sensors, actuators) 9 HuaTian Technology (XI AN) CO., Ltd

10 Process Challenges There are a number of process challenges for MEMS packaging Release and stiction Dicing Die handling Wafer level encapsulation Stress Outgasing 10 HuaTian Technology (XI AN) CO., Ltd

11 Test and Reliability Methods for reliability assessment of MEMS devices are still being developed, and the requirements are more complex than for ICs. Failure modes and mechanisms are more complex Number of potential failure modes and mechanisms is larger Some failures, such as collisions or sticking of movable parts, are transient and thus hard to identify or locate Packages contain multiple components, and MEMS device failure must be differentiated from and ASIC failure Failure criteria are device- and application-specific Standard destructive failure analysis can result in erroneous conclusions due to sample preparation problems, so physical analysis must often be combined with modeling Monitoring instruments may be exposed to the loading conditions, such as temperature excursions, mechanical shock, or vibration, and may need to be checked for degradation themselves 11 HuaTian Technology (XI AN) CO., Ltd

12 Drivers for MEMS Package Drivers in MEMS packaging: performance, cost, size MEMS average selling price (ASP) erosion from 2006 to HuaTian Technology (XI AN) CO., Ltd

13 Lower Cost: Standard Platforms Package cost is a significant component; MEMS device cost drops quickly, the package and test become a larger percentage of total production cost. Package standardization is required to reduce cost MEMS companies can take advantages of their package optimization experience and mature production lines. Popular standard platforms: Laminate, Leadframe, and WLCSP 13 HuaTian Technology (XI AN) CO., Ltd

14 MEMS Packages and Laminate/PCB A lamination-based manufacturing process allows for a broader selection of materials and fabrication processes than silicon-based manufacturing, and therefore provides greater design freedom for producing functional microdevices. Laminate microphones RF micro-switch on PCB Flexible integrated microfluidics From Prof. Mark Bachman, University of California Irvine 14 HuaTian Technology (XI AN) CO., Ltd

15 Miniaturization Source: Robert Bosch and Gartner MEMS technology has also allowed a shrinkage in size The figure shows the accelerometer footprint sizes for the automotive and consumer segments. 15 HuaTian Technology (XI AN) CO., Ltd

16 New Enabling Technology More advanced 3D technologies, are generally reserved for high-i/o communication ICs and could be applied to higher-i/o combo sensor MEMS. These include: flip chip, through silicon via (TSV) through-mold via copper pillar ASIC as a capping wafer wafer bonding 16 HuaTian Technology (XI AN) CO., Ltd

17 BMA355 Bosch Sensortec BMA355, 3-Axis MEMS Accelerometer, the first MEMS device using TSV in ASIC and WLCSP to reach the smallest. With a size of 1.4mm3 (1.2x1.5x0.8mm) the BMA335 is the smallest MEMS accelerometer on the market and feauture 60% volume reduction. 17 HuaTian Technology (XI AN) CO., Ltd

18 CMOS Image Sensor 18 HuaTian Technology (XI AN) CO., Ltd

19 TGV Application Diameter 5-30μm, pitch 10-80μm, thickness μm Vertical feedthrough, Hermeticity, low cost. reliability May need microlense/ micro mirror 19 HuaTian Technology (XI AN) CO., Ltd

20 Outline of Presentation Development of MEMS MEMS Packaging Trend and Challenges MEMS Packaging of HuaTian Summary 20 HuaTian Technology (XI AN) CO., Ltd

21 MEMS Packaging Technology Packaging Technology Laminate Leadframe SiP Wafer level Packaging Simulation Mechanical and stress Thermal Electrical 21 HuaTian Technology (XI AN) CO., Ltd

22 HTXA QFN Technology Roadmap 22 HuaTian Technology (XI AN) CO., Ltd

23 HTXA Laminated Technology Roadmap Items Package LGA TFBGA VFBGA WFBGA BGA-H Options SiP LFBGA Stack die CSP PiP Au Wire HVM Pd-Cu Wire HVM Technology Pd-Cu Wire Qual run Max I/O Counts: 408 Min Pitch: 0.65mm Min Ball size: 0.3mm Alloy Wire HVM Max I/O Counts: 800 Min Pitch: 0.4mm Min Ball size: 0.25mm Coreless Substrate 1Layer Substrate Min. Sub Thk 0.13mm Package size: Min. Sub Thk 0.18mm 5G SerDes 1.5x1.0~21.0x21.0mm Package size: ~35x35mm CODEC AP FPGA G-Sensor Key Market Trends Set-Top Box(STB) GPS-LNA SIM Card RF Transceiver Base Bond HDTV DSP Si-Microphone RF-PA Gyroscope Touch-Sensor Si Node =50nm 40nm 28nm 23 HuaTian Technology (XI AN) CO., Ltd

24 HTKS TSV Technology TSV WLCSP WLO WLC Application Application Application Application WLCSP WLO TSV WLC CIS MEMS Interposer CIS PMU RFIC AP BP DSP CIS lens LED lens Laser Lens Stacked Lens Normal CIS Module Array CIS Module 24 HuaTian Technology (XI AN) CO., Ltd

25 HTKS WLCSP Technology Process Wafer size Line & Space Metal Layer num 200mm 20um/20um Al/Ni/Au or Cu/Ni/Au 2 RDL Wafer size Method Bump diameter Bump height Bump pitch Bump Metal Solder bump 200mm Mount 100~150 um 100um 150~300 um 200mm Print 200um 100um 400um As customer request (MP SAC305) Wafer size Bump Diameter Bump height Bump pitch Bump Metal 200/300mm 15um 20um 40um Cu/Ni/Sn Cu/Ni/SnAg ECD bumping (developing) 25 HuaTian Technology (XI AN) CO., Ltd

26 Outline of Presentation Development of MEMS MEMS Packaging Trend and Challenges MEMS Packaging of HuaTian Summary 26 HuaTian Technology (XI AN) CO., Ltd

27 Summary (1) With the proliferation of sensors due to IoT and smartphones, MEMS market is exploding. It give a great push for MEMS packaging and provide a good business chance for OSAT. (2) There are a number of packaging challenges for MEMS packaging. New technology, TSV, TGV, Cu pillar are developing to achieve low cost, miniaturization and high performance. (3) Standard packaging technology based on laminate, leadframe and WLCSP will be the main technologies for OSAT (4) Huatian group has put great effort for MEMS packaging and are ready for MEMS packaging. 27 HuaTian Technology (XI AN) CO., Ltd

28 Thank you for your attention! 28 HuaTian Technology (XI AN) CO., Ltd

MEMS & SENSORS PACKAGING EVOLUTION

MEMS & SENSORS PACKAGING EVOLUTION MEMS & SENSORS PACKAGING EVOLUTION Presented by Christophe Zinck ASE Group September 26th, 2013 Outline 1. Brief presentation of ASE Group 2. Overview of MEMS packaging 3. ASE MEMS packaging background

More information

Wafer Level Fan-out and Embedded Technology for Potable/Wearable/IoT Devices. Max Lu, Deputy Director, SPIL

Wafer Level Fan-out and Embedded Technology for Potable/Wearable/IoT Devices. Max Lu, Deputy Director, SPIL Wafer Level Fan-out and Embedded Technology for Potable/Wearable/IoT Devices Max Lu, Deputy Director, SPIL 2 Outline Market Trend & Industry Benchmark KEY Innovative Package Solutions Molded WLCSP Fan-Out

More information

K&S Interconnect Technology Symposium

K&S Interconnect Technology Symposium Advanced Packaging Interconnect Trends and Technology Developments E. Jan Vardaman, President, Advanced Packaging Market Share 28 billion WB 13.8 billion FC & WLP 41 billion WB 28.5 billion FC & WLP Source:

More information

Dual Integration - Verschmelzung von Wafer und Panel Level Technologien

Dual Integration - Verschmelzung von Wafer und Panel Level Technologien ERÖFFNUNG DES INNOVATIONSZENTRUMS ADAPTSYS Dual Integration - Verschmelzung von Wafer und Panel Level Technologien Dr. Michael Töpper BDT Introduction Introduction Why do we need such large machines to

More information

Fraunhofer ISIT, Itzehoe 14. Juni 2005. Fraunhofer Institut Siliziumtechnologie (ISIT)

Fraunhofer ISIT, Itzehoe 14. Juni 2005. Fraunhofer Institut Siliziumtechnologie (ISIT) Research and Development centre for Microelectronics and Microsystems Applied Research, Development and Production for Industry ISIT applies an ISO 9001:2000 certified quality management system. Certificate

More information

Wafer Level Testing Challenges for Flip Chip and Wafer Level Packages

Wafer Level Testing Challenges for Flip Chip and Wafer Level Packages Wafer Level Testing Challenges for Flip Chip and Wafer Level Packages by Lim Kok Hwa and Andy Chee STATS ChipPAC Ltd. 5 Yishun Street 23, Singapore 768442 kokhwa.lim@statschippac.com; kenghwee.chee@statschippac.com

More information

A Manufacturing Technology Perspective of: Embedded Die in Substrate and Panel Based Fan-Out Packages

A Manufacturing Technology Perspective of: Embedded Die in Substrate and Panel Based Fan-Out Packages A Manufacturing Technology Perspective of: Embedded Die in Substrate and Panel Based Fan-Out Packages Bernd K Appelt Director WW Business Development April 24, 2012 Table of Content Definitions Wafer Level

More information

MEMS devices application based testing

MEMS devices application based testing MEMS devices application based testing CEEES Seminar 18-10-2012 RDM Campus Rotterdam NL by Kees Revenberg MASER Engineering Enschede NL Outline Introduction MEMS classification Sensing & Actuating Manufacturing

More information

Advanced Technologies and Equipment for 3D-Packaging

Advanced Technologies and Equipment for 3D-Packaging Advanced Technologies and Equipment for 3D-Packaging Thomas Oppert Semicon Russia 15 th May 2014 Outline Short Company Introduction Electroless Plating on Wafer Level Ultra-SB 2 - Wafer Level Solder Balling

More information

The Internet of Everything or Sensors Everywhere

The Internet of Everything or Sensors Everywhere The Internet of Everything or s Everywhere 2015 This document and the information included herein are proprietary of the China Wafer Level CSP Co., Ltd. Disclosure or reproduction by any media, inclusive

More information

MEMS mirror for low cost laser scanners. Ulrich Hofmann

MEMS mirror for low cost laser scanners. Ulrich Hofmann MEMS mirror for low cost laser scanners Ulrich Hofmann Outline Introduction Optical concept of the LIDAR laser scanner MEMS mirror requirements MEMS mirror concept, simulation and design fabrication process

More information

Dry Film Photoresist & Material Solutions for 3D/TSV

Dry Film Photoresist & Material Solutions for 3D/TSV Dry Film Photoresist & Material Solutions for 3D/TSV Agenda Digital Consumer Market Trends Components and Devices 3D Integration Approaches Examples of TSV Applications Image Sensor and Memory Via Last

More information

Semi Networking Day Packaging Key for System Integration

Semi Networking Day Packaging Key for System Integration Semi Networking Day Packaging Key for System Integration Le Quartz, 75 Cours Emile Zola 69100 Villeurbanne, France Tel : +33 472 83 01 80 - Fax : +33 472 83 01 83 Web: http://www.yole.fr Semi Networking

More information

SUSS MICROTEC INVESTOR PRESENTATION. November 2015

SUSS MICROTEC INVESTOR PRESENTATION. November 2015 SUSS MICROTEC INVESTOR PRESENTATION November 2015 DISCLAIMER This presentation contains forward-looking statements relating to the business, financial performance and earnings of SUSS MicroTec AG and its

More information

Fraunhofer IZM-ASSID Targets

Fraunhofer IZM-ASSID Targets FRAUNHOFER INSTITUTE FoR Reliability and MiCroinTegration IZM Fraunhofer IZM ASSID All Silicon System Integration Dresden All Silicon System Integration Dresden Fraunhofer IZM-ASSID Fraunhofer IZM The

More information

Acoustic/Electronic stack design, interconnect, and assembly Techniques available and under development

Acoustic/Electronic stack design, interconnect, and assembly Techniques available and under development Acoustic/Electronic stack design, interconnect, and assembly Techniques available and under development - supported by the European Commission under support-no. IST-026461 e-cubes Maaike M. V. Taklo :

More information

SiP Solutions for IoT / Wearables. Pin-Chiang Chang, Deputy Manager, SPIL

SiP Solutions for IoT / Wearables. Pin-Chiang Chang, Deputy Manager, SPIL SiP Solutions for IoT / Wearables Pin-Chiang Chang, Deputy Manager, SPIL Electronic Products Integration Trend Year ~2000 2010 2015 Main Stream Products PC / Notebook Mobile Phone / Tablet IoT / Wearables

More information

Specializing in Open Cavity Packages & Complete IC Assembly Services ISO 9001:2008 Certified and ITAR Registered

Specializing in Open Cavity Packages & Complete IC Assembly Services ISO 9001:2008 Certified and ITAR Registered TowerJazz Global Symposium Specializing in Open Cavity Packages & Complete IC Assembly Services and TowerJazz Global Symposium Quik-Pak a division of Delphon Industries 2011 Gold Sponsor and TowerJazz

More information

Advanced Technologies for System Integration Leveraging the European Ecosystem

Advanced Technologies for System Integration Leveraging the European Ecosystem Advanced Technologies for System Integration Leveraging the European Ecosystem Presented by Jean-Marc Yannou ASE Europe June 27, 2013 Packaging - Key for System Integration Semi networking day, Porto 1

More information

PCB Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices

PCB Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices Introduction There is an industry-wide trend towards using the smallest package possible for a given pin count. This is driven primarily

More information

Silicon-On-Glass MEMS. Design. Handbook

Silicon-On-Glass MEMS. Design. Handbook Silicon-On-Glass MEMS Design Handbook A Process Module for a Multi-User Service Program A Michigan Nanofabrication Facility process at the University of Michigan March 2007 TABLE OF CONTENTS Chapter 1...

More information

How to Improve Tablet PCs and Other Portable Devices with MEMS Timing Technology

How to Improve Tablet PCs and Other Portable Devices with MEMS Timing Technology How to Improve Tablet PCs and Other Portable Devices with MEMS Timing Technology The tremendous success of tablets and smart phones such as the ipad, iphone and Android based devices presents both challenges

More information

Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M

Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection

More information

Global Semiconductor Packaging Materials Outlook

Global Semiconductor Packaging Materials Outlook NOVEMBER 2009 Global Semiconductor Packaging Materials Outlook Produced by Semiconductor Equipment and Materials International and TechSearch International, Inc. EXECUTIVE SUMMARY 1 1 INTRODUCTION 5 1.1

More information

Internet of Things (IoT) and its impact on Semiconductor Packaging

Internet of Things (IoT) and its impact on Semiconductor Packaging Internet of Things (IoT) and its impact on Semiconductor Packaging Dr. Nathapong Suthiwongsunthorn 21 November 2014 What is the IoT? From Wikipedia: The Internet of Things (IoT) is the interconnection

More information

8-bit Atmel Microcontrollers. Application Note. Atmel AVR211: Wafer Level Chip Scale Packages

8-bit Atmel Microcontrollers. Application Note. Atmel AVR211: Wafer Level Chip Scale Packages Atmel AVR211: Wafer Level Chip Scale Packages Features Allows integration using the smallest possible form factor Packaged devices are practically the same size as the die Small footprint and package height

More information

1.Introduction. Introduction. Most of slides come from Semiconductor Manufacturing Technology by Michael Quirk and Julian Serda.

1.Introduction. Introduction. Most of slides come from Semiconductor Manufacturing Technology by Michael Quirk and Julian Serda. .Introduction If the automobile had followed the same development cycle as the computer, a Rolls- Royce would today cost $00, get one million miles to the gallon and explode once a year Most of slides

More information

Simon McElrea : BiTS 3.10.14

Simon McElrea : BiTS 3.10.14 Interconnectology The Road to 3D Mobile Consumer Driven Market This Changes Everything 1 Simon McElrea : BiTS 3.10.14 What Is Advanced/3D Packaging? 2 This Is... But So Is This. The level of Hardware Engineering

More information

Five Year Projections of the Global Flexible Circuit Market

Five Year Projections of the Global Flexible Circuit Market Five Year Projections of the Global Flexible Circuit Market Robert Turunen and Dominique Numakura, DKN Research And James J. Hickman, PhD, Hickman Associates Inc Summary A new market research process has

More information

MEPTEC. Ecosystem for MCU, Sensors and MEMS for IoT Tony Massimini Chief of Technology Semico Research Corp. May 20, 2015 tonym@semico.

MEPTEC. Ecosystem for MCU, Sensors and MEMS for IoT Tony Massimini Chief of Technology Semico Research Corp. May 20, 2015 tonym@semico. MEPTEC Ecosystem for MCU, Sensors and MEMS for IoT Tony Massimini Chief of Technology Semico Research Corp. May 20, 2015 tonym@semico.com Outline Impact of Sensors Basic Building Blocks for IoT Sensors

More information

t Markus Sonnemann, Robert Bosch GmbH

t Markus Sonnemann, Robert Bosch GmbH MST Baden-Württemberg, Stuttgart, 27.04.2015 Mikrosystemtechnik t Enabler für das Internet-der-Dinge t Markus Sonnemann, Robert Bosch GmbH 1 Bosch the MEMS Pioneer Start t of MEMS production in 1995 More

More information

Ball Grid Array (BGA) Technology

Ball Grid Array (BGA) Technology Chapter E: BGA Ball Grid Array (BGA) Technology The information presented in this chapter has been collected from a number of sources describing BGA activities, both nationally at IVF and reported elsewhere

More information

POWER FORUM, BOLOGNA 20-09-2012

POWER FORUM, BOLOGNA 20-09-2012 POWER FORUM, BOLOGNA 20-09-2012 Convertitori DC/DC ad alta densità di potenza e bassa impedenza termica. Massimo GAVIOLI. Senior Field Application Engineer. Intersil SIMPLY SMARTER Challenges when Designing

More information

Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions

Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions Innovative Wafer & Interconnect Technologies Outline Low cost RFID Tags & Labels Standard applications and

More information

Integrated Circuit Packaging and Thermal Design

Integrated Circuit Packaging and Thermal Design Lezioni di Tecnologie e Materiali per l Elettronica Integrated Circuit Packaging and Thermal Design Danilo Manstretta microlab.unipv.it danilo.manstretta@unipv.it Introduction to IC Technologies Packaging

More information

GUIDELINES FOR PRINTED CIRCUIT BOARD ASSEMBLY (PCBA) OF UTAC GROUP S GRID ARRAY PACKAGE (GQFN) AND ITS BOARD LEVEL RELIABILITY

GUIDELINES FOR PRINTED CIRCUIT BOARD ASSEMBLY (PCBA) OF UTAC GROUP S GRID ARRAY PACKAGE (GQFN) AND ITS BOARD LEVEL RELIABILITY GUIDELINES FOR PRINTED CIRCUIT BOARD ASSEMBLY (PCBA) OF UTAC GROUP S GRID ARRAY PACKAGE (GQFN) AND ITS BOARD LEVEL RELIABILITY Kyaw Ko Lwin*, Daniel Ting Lee Teh, Carolyn Epino Tubillo, Jun Dimaano, Ang

More information

Microsystem technology and printed circuit board technology. competition and chance for Europe

Microsystem technology and printed circuit board technology. competition and chance for Europe Microsystem technology and printed circuit board technology competition and chance for Europe Prof. Udo Bechtloff, KSG Leiterplatten GmbH 1 Content KSG a continuously growing company PCB based Microsystems

More information

Faszination Licht. Entwicklungstrends im LED Packaging. Dr. Rafael Jordan Business Development Team. Dr. Rafael Jordan, Business Development Team

Faszination Licht. Entwicklungstrends im LED Packaging. Dr. Rafael Jordan Business Development Team. Dr. Rafael Jordan, Business Development Team Faszination Licht Entwicklungstrends im LED Packaging Dr. Rafael Jordan Business Development Team Agenda Introduction Hermetic Packaging Large Panel Packaging Failure Analysis Agenda Introduction Hermetic

More information

Flip Chip Package Qualification of RF-IC Packages

Flip Chip Package Qualification of RF-IC Packages Flip Chip Package Qualification of RF-IC Packages Mumtaz Y. Bora Peregrine Semiconductor San Diego, Ca. 92121 mbora@psemi.com Abstract Quad Flat Pack No Leads (QFNs) are thermally enhanced plastic packages

More information

Samsung emcp. WLI DDP Package. Samsung Multi-Chip Packages can help reduce the time to market for handheld devices BROCHURE

Samsung emcp. WLI DDP Package. Samsung Multi-Chip Packages can help reduce the time to market for handheld devices BROCHURE Samsung emcp Samsung Multi-Chip Packages can help reduce the time to market for handheld devices WLI DDP Package Deliver innovative portable devices more quickly. Offer higher performance for a rapidly

More information

, Yong-Min Kwon 1 ) , Ho-Young Son 1 ) , Jeong-Tak Moon 2 ) Byung-Wook Jeong 2 ) , Kyung-In Kang 2 )

, Yong-Min Kwon 1 ) , Ho-Young Son 1 ) , Jeong-Tak Moon 2 ) Byung-Wook Jeong 2 ) , Kyung-In Kang 2 ) Effect of Sb Addition in Sn-Ag-Cu Solder Balls on the Drop Test Reliability of BGA Packages with Electroless Nickel Immersion Gold (ENIG) Surface Finish Yong-Sung Park 1 ), Yong-Min Kwon 1 ), Ho-Young

More information

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0. ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)

More information

NXP and the Internet of Things ( IoT ) Andrew C. Russell VP Marketing Greater China

NXP and the Internet of Things ( IoT ) Andrew C. Russell VP Marketing Greater China NXP and the Internet of Things ( IoT ) Andrew C. Russell VP Marketing Greater China Agenda The Internet of Things ( IoT ): a New and Exciting Application Space A typical IoT application Lighting for Home

More information

MACHINE VISION FOR SMARTPHONES. Essential machine vision camera requirements to fulfill the needs of our society

MACHINE VISION FOR SMARTPHONES. Essential machine vision camera requirements to fulfill the needs of our society MACHINE VISION FOR SMARTPHONES Essential machine vision camera requirements to fulfill the needs of our society INTRODUCTION With changes in our society, there is an increased demand in stateof-the art

More information

The Internet of Things: Opportunities & Challenges

The Internet of Things: Opportunities & Challenges The Internet of Things: Opportunities & Challenges What is the IoT? Things, people and cloud services getting connected via the Internet to enable new use cases and business models Cloud Services How is

More information

Thermal Management for Low Cost Consumer Products

Thermal Management for Low Cost Consumer Products Thermal Management for Low Cost Consumer Products TI Fellow Manager: Advanced Package Modeling and Characterization Texas Instruments rvin@ti.com Outline The challenges Stacked die, Package-on-Package,

More information

IoT: New Opportunities for Semiconductor Industry Growth. Andrew C. Russell Vice President Marketing Greater China

IoT: New Opportunities for Semiconductor Industry Growth. Andrew C. Russell Vice President Marketing Greater China IoT: New Opportunities for Semiconductor Industry Growth Andrew C. Russell Vice President Marketing Greater China Agenda The Internet of Things ( IoT ): An Exciting, Disruptive Technology and Application

More information

TN0991 Technical note

TN0991 Technical note Technical note Description of WLCSP for STMicroelectronics EEPROMs and recommendations for use Introduction This document describes the 5 and 8-bump WLCSPs (wafer level chip size package) used for STMicroelectronics

More information

Technology Developments Towars Silicon Photonics Integration

Technology Developments Towars Silicon Photonics Integration Technology Developments Towars Silicon Photonics Integration Marco Romagnoli Advanced Technologies for Integrated Photonics, CNIT Venezia - November 23 th, 2012 Medium short reach interconnection Example:

More information

Figure 1 Wafer with Notch

Figure 1 Wafer with Notch Glass Wafer 2 SCHOTT is an international technology group with more than 125 years of experience in the areas of specialty glasses, materials and advanced technologies. With our high-quality products and

More information

Compliant Terminal Technology Summary Test Report

Compliant Terminal Technology Summary Test Report Engineering Report ER04100 October 5th, 2004 Revision A Copyright Autosplice Inc., September 2004 Table of Contents Summary Overview 3 Compliant Terminal Specifications 3 Test Plan 4 Test Conditions 4

More information

Anti-Counterfeit, Miniaturized, and Advanced Electronic Substrates for Medical Device Applications

Anti-Counterfeit, Miniaturized, and Advanced Electronic Substrates for Medical Device Applications Anti-Counterfeit, Miniaturized, and Advanced Electronic Substrates for Medical Device Applications Rabindra N. Das, Frank D. Egitto, and How Lin Endicott Interconnect Technologies, Inc., 1093 Clark Street,

More information

to realize innovative electronic products 2 June 13, 2013 Jan Eite Bullema 3D Printing to realize innovative electronic products

to realize innovative electronic products 2 June 13, 2013 Jan Eite Bullema 3D Printing to realize innovative electronic products Overview of 2 What is? Methods / Materials / Current Products Rapid Prototyping evolves to Additive Manufacturing in Electronics Manufacturing Recent developments in 3D printing at TNO Conclusions / jan_eite.bullema@tno.nl

More information

Advanced-packaging technologies: The implications for first movers and fast followers

Advanced-packaging technologies: The implications for first movers and fast followers 55 Mick Ryan/Getty Images Advanced-packaging technologies: The implications for first movers and fast followers Adoption of 3-D technologies appears inevitable, creating both opportunities and risks. Seunghyuk

More information

Copyright 2008 IEEE. Reprinted from ECTC2008 Proceedings.

Copyright 2008 IEEE. Reprinted from ECTC2008 Proceedings. Copyright 2008 IEEE. Reprinted from ECTC2008 Proceedings. This material is posted here with permission of the IEEE. Such permission of the IEEE does not in any way imply IEEE endorsement of any of Amkor

More information

Chip-on-board Technology

Chip-on-board Technology Hybrid Technology The trend in electronics is to continue to integrate more and more functions and numbers of components into a single, smaller assembly. Hybrid circuit technology is a key method of increasing

More information

Designing with High-Density BGA Packages for Altera Devices

Designing with High-Density BGA Packages for Altera Devices 2014.12.15 Designing with High-Density BGA Packages for Altera Devices AN-114 Subscribe As programmable logic devices (PLDs) increase in density and I/O pins, the demand for small packages and diverse

More information

SiP Technology and Testing. Name: Philippe Cauvet Date: 2007, March 28

SiP Technology and Testing. Name: Philippe Cauvet Date: 2007, March 28 SiP Technology and Testing Name: Philippe Cauvet Date: 2007, March 28 Outline Definition Market / Applications Design and technology Packaging Technologies Test Challenges Conclusion Journée EEA Montpellier

More information

ECP Embedded Component Packaging Technology

ECP Embedded Component Packaging Technology ECP Embedded Component Packaging Technology A.Kriechbaum, H.Stahr, M.Biribauer, N.Haslebner, M.Morianz AT&S Austria Technologie und Systemtechnik AG Abstract The packaging market has undergone tremendous

More information

Comparison of Advanced PoP Package Configurations

Comparison of Advanced PoP Package Configurations Comparison of Advanced PoP Package Configurations By Hamid Eslampour, SeongMin Lee, SeongWon Park, TaeKeun Lee, InSang Yoon, YoungChul Kim STATS ChipPAC Inc. 47400 Kato Rd Fremont, CA 94538 Copyright 2010.

More information

2009 April 22, Cambridge UK

2009 April 22, Cambridge UK 13.05.2009 1 Astride the Packaging Roadmap Access to Packaging Case Study 2009 April 22, Cambridge UK certified by RoodMicrotec. eltek MilleniumMicrotec Zwolle (NL) Dresden (D) Noerdlingen (D) Stuttgart

More information

Commercializing TSV 3DIC Wafer Process Technology Solutions for Next Generation of Mobile Electronic Systems

Commercializing TSV 3DIC Wafer Process Technology Solutions for Next Generation of Mobile Electronic Systems 2013 SEMICON China 3D-IC Forum Commercializing TSV 3DIC Wafer Process Technology Solutions for Next Generation of Mobile Electronic Systems Dr. Shiuh-Wuu Lee, Sr. VP of Technology Research & Development

More information

Modern Market Sensors in Smartphones: State-of-the-art How to make smartphones even more smarter? Conclusions

Modern Market Sensors in Smartphones: State-of-the-art How to make smartphones even more smarter? Conclusions Smartphone Sensing: What Sensors Would we Like to Have in the Future Smartphones? Dr. Sergey Y. Yurish International Frequency Sensor Association (IFSA), Technology Assistance BCNA 2010, S.L. Barcelona,

More information

Lecture 1. Introduction to Embedded Computer Systems

Lecture 1. Introduction to Embedded Computer Systems CENG 314 Lecture 1 Introduction to Embedded Computer Systems Asst. Prof. Tolga Ayav, Ph.D. Department of Computer Engineering System A system has a set of one or more inputs entering a black box and a

More information

Metallized Particle Interconnect A simple solution for high-speed, high-bandwidth applications

Metallized Particle Interconnect A simple solution for high-speed, high-bandwidth applications Metallized Particle Interconnect A simple solution for high-speed, high-bandwidth applications The MPI Material Advantage Advantages: High-Density - Scalable Pitches down to 0,8 mm pitch possible - Scalable

More information

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble) Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / LCMS Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations

More information

Abracon PTM Introduction to ANFCA Series Flexible Peel & Stick NFC Antennas

Abracon PTM Introduction to ANFCA Series Flexible Peel & Stick NFC Antennas Abracon PTM Introduction to ANFCA Series Flexible Peel & Stick NFC Antennas WWW.ABRACON.COM ANFCA Series Flexible Peel & Stick NFC Antennas Purpose To introduce ANFCA Series, Flexible Peel & Stick NFC

More information

CIN::APSE COMPRESSION TECHNOLOGY GET CONNECTED...

CIN::APSE COMPRESSION TECHNOLOGY GET CONNECTED... CIN::APSE COMPRESSION TECHNOLOGY E N A B L I N G T E C H N O L O G Y F O R T H E M O S T D E M A N D I N G I N T E R C O N N E C T A P P L I C AT I O N S GET CONNECTED... CIN::APSE It takes more than an

More information

RJR Polymers Reliability Qualification Report RQFN55-24-A and RQFN44-12-A

RJR Polymers Reliability Qualification Report RQFN55-24-A and RQFN44-12-A Reliability Qualification Report RQFN55-24-A and RQFN44-12-A Package Qualification September 14, 2011 RJR Polymers Reliability Qualification Report RQFN55-24-A and RQFN44-12-A Table of Contents Purpose.3

More information

MEMS and Sensor Trends Smaller, Faster and Available to the Mass Market. Karen Lightman, Executive Director MEMS Industry Group

MEMS and Sensor Trends Smaller, Faster and Available to the Mass Market. Karen Lightman, Executive Director MEMS Industry Group MEMS and Sensor Trends Smaller, Faster and Available to the Mass Market Karen Lightman, Executive Director MEMS Industry Group Uplinq Hardware Day - 2013 About MEMS Industry Group (MIG) MIG is the industry

More information

Development of a Design & Manufacturing Environment for Reliable and Cost-Effective PCB Embedding Technology

Development of a Design & Manufacturing Environment for Reliable and Cost-Effective PCB Embedding Technology Development of a Design & Manufacturing Environment for Reliable and Cost-Effective PCB Embedding Technology Outline Introduction CAD design tools for embedded components Thermo mechanical design rules

More information

Analysis of BGA Solder Joint Reliability for Selected Solder Alloy and Surface Finish Configurations

Analysis of BGA Solder Joint Reliability for Selected Solder Alloy and Surface Finish Configurations Analysis of BGA Solder Joint Reliability for Selected Solder Alloy and Surface Finish Configurations Hugh Roberts / Atotech USA Inc Sven Lamprecht and Christian Sebald / Atotech Deutschland GmbH Mark Bachman,

More information

Molded. By July. A chip scale. and Omega. Guidelines. layer on the silicon chip. of mold. aluminum or. Bottom view. Rev. 1.

Molded. By July. A chip scale. and Omega. Guidelines. layer on the silicon chip. of mold. aluminum or. Bottom view.  Rev. 1. Application Note PAC-006 By J. Lu, Y. Ding, S. Liu, J. Gong, C. Yue July 2012 Molded Chip Scale Package Assembly Guidelines Introduction to Molded Chip Scale Package A chip scale package (CSP) has direct

More information

Thermal Modeling Methodology for Fast and Accurate System-Level Analysis: Application to a Memory-on-Logic 3D Circuit

Thermal Modeling Methodology for Fast and Accurate System-Level Analysis: Application to a Memory-on-Logic 3D Circuit Thermal Modeling Methodology for Fast and Accurate System-Level Analysis: Application to a Memory-on-Logic 3D Circuit Cristiano Santos 1,2, Pascal Vivet 1, Philippe Garrault 3, Nicolas Peltier 3, Sylvian

More information

The Impact of IoT on Semiconductor Companies

The Impact of IoT on Semiconductor Companies Advisory The Impact of IoT on Semiconductor Companies Rajesh Mani Director, Strategy and Operations April 15, 2015 The Internet of Things (IoT) has been defined in multiple ways here s our take! The collection

More information

類 比 與 MEMS 感 測 器 啟 動 智 慧 新 生 活 The Smart-World Started with ST (Analog, MEMS and Sensors)

類 比 與 MEMS 感 測 器 啟 動 智 慧 新 生 活 The Smart-World Started with ST (Analog, MEMS and Sensors) 類 比 與 MEMS 感 測 器 啟 動 智 慧 新 生 活 The Smart-World Started with ST (Analog, MEMS and Sensors) 郁 正 德 資 深 技 術 行 銷 經 理 意 法 半 導 體 Robert Yu Sr. Technical Marketing Manager STMicroelectronics. laubarnes on flickr

More information

Connection Systems. Gold Dot Connection Systems

Connection Systems. Gold Dot Connection Systems Connection Systems Gold Dot Connection Systems Connection Systems Gold Dot speed, density and reliability Delphi Connection Systems has the solution for emerging interconnect requirements of speed and

More information

Embedding components within PCB substrates

Embedding components within PCB substrates Embedding components within PCB substrates Max Clemons, Altium - March 19, 2014 Continued pressure for electronic devices that provide greater functionality in ever-smaller formfactors is not only providing

More information

Non-Contact Vibration Measurement of Micro-Structures

Non-Contact Vibration Measurement of Micro-Structures Non-Contact Vibration Measurement of Micro-Structures Using Laser Doppler Vibrometry (LDV) and Planar Motion Analysis (PMA) to examine and assess the vibration characteristics of micro- and macro-structures.

More information

Embedded Systems. introduction. Jan Madsen

Embedded Systems. introduction. Jan Madsen Embedded Systems introduction Jan Madsen Informatics and Mathematical Modeling Technical University of Denmark Richard Petersens Plads, Building 321 DK2800 Lyngby, Denmark jan@imm.dtu.dk Wireless Sensor

More information

HDI. HDI = High Density Interconnect. Kenneth Jonsson Bo Andersson. NCAB Group

HDI. HDI = High Density Interconnect. Kenneth Jonsson Bo Andersson. NCAB Group HDI HDI = High Density Interconnect Kenneth Jonsson Bo Andersson NCAB Group Definitions / Standards (IPC) Pros & Cons Key equipment Build-ups Choice of material Design rules IPC HDI reliability (µvia stacked

More information

italtec PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines

italtec PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines PRINTED CIRCUITS EQUIPMENT PRINTED CIRCUITS EQUIPMENT Insulator machines Echting machines Special equipment and machines On customer request it is possible to supply: Benches for PCB Oven for PCB Chemicals

More information

CIRCUITS AND SYSTEMS- Assembly and Printed Circuit Board (PCB) Package Mohammad S. Sharawi ASSEMBLY AND PRINTED CIRCUIT BOARD (PCB) PACKAGE

CIRCUITS AND SYSTEMS- Assembly and Printed Circuit Board (PCB) Package Mohammad S. Sharawi ASSEMBLY AND PRINTED CIRCUIT BOARD (PCB) PACKAGE ASSEMBLY AND PRINTED CIRCUIT BOARD (PCB) PACKAGE Mohammad S. Sharawi Electrical Engineering Department, King Fahd University of Petroleum and Minerals Dhahran, 31261 Saudi Arabia Keywords: Printed Circuit

More information

State-of-Art (SoA) System-on-Chip (SoC) Design HPC SoC Workshop

State-of-Art (SoA) System-on-Chip (SoC) Design HPC SoC Workshop Photos placed in horizontal position with even amount of white space between photos and header State-of-Art (SoA) System-on-Chip (SoC) Design HPC SoC Workshop Michael Holmes Manager, Mixed Signal ASIC/SoC

More information

Introduction to Silicon Labs. November 2015

Introduction to Silicon Labs. November 2015 Introduction to Silicon Labs November 2015 1 Company Background Global mixed-signal semiconductor company Founded in 1996; public since 2000 (NASDAQ: SLAB) >1,100 employees and 11 R&D locations worldwide

More information

FEATURE ARTICLE. Figure 1: Current vs. Forward Voltage Curves for Silicon Schottky Diodes with High, Medium, Low and ZBD Barrier Heights

FEATURE ARTICLE. Figure 1: Current vs. Forward Voltage Curves for Silicon Schottky Diodes with High, Medium, Low and ZBD Barrier Heights PAGE 1 FEBRUARY 2009 Schottky Diodes by Rick Cory, Skyworks Solutions, Inc. Introduction Schottky diodes have been used for several decades as the key elements in frequency mixer and RF power detector

More information

Mounting Instructions for SP4 Power Modules

Mounting Instructions for SP4 Power Modules Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the

More information

Research in Nanotechnologies and Sensing

Research in Nanotechnologies and Sensing Eemeli työpaja nro 12, Micronova Research in Nanotechnologies and Sensing Tapani Ryhänen Nokia Research Center, Sensor and Material Technologies Laboratory (Cambridge, Otaniemi, Skolkovo) November 12,

More information

Smart Systems for Healthcare and Energy Efficiency

Smart Systems for Healthcare and Energy Efficiency Smart Systems for Healthcare and Energy Efficiency EPOSS Annual Forum 8 th October 2010 Salvo Coffa Group VP, R&D General Manager Industrial & Multisegment Sector STMicroelectronics 1 Smart Systems Main

More information

From Technologies to Applications

From Technologies to Applications Laboratoire d électronique et de technologie de l information From Technologies to Applications J.R. Lèquepeys, Head of Silicon Component Division 2012 INTEL ERIC - 2012 1 AGENDA Brief overview of CEA-Leti

More information

MEMS Processes from CMP

MEMS Processes from CMP MEMS Processes from CMP MUMPS from MEMSCAP Bulk Micromachining 1 / 19 MEMSCAP MUMPS processes PolyMUMPS SOIMUMPS MetalMUMPS 2 / 19 MEMSCAP Standard Processes PolyMUMPs 8 lithography levels, 7 physical

More information

The accelerometer designed and realized so far is intended for an. aerospace application. Detailed testing and analysis needs to be

The accelerometer designed and realized so far is intended for an. aerospace application. Detailed testing and analysis needs to be 86 Chapter 4 Accelerometer Testing 4.1 Introduction The accelerometer designed and realized so far is intended for an aerospace application. Detailed testing and analysis needs to be conducted to qualify

More information

Silicon MEMS Oscillators for High Speed Digital Systems. Aaron Partridge, PhD Sassan Tabatabaei, PhD

Silicon MEMS Oscillators for High Speed Digital Systems. Aaron Partridge, PhD Sassan Tabatabaei, PhD Silicon MEMS Oscillators for High Speed Digital Systems Aaron Partridge, PhD Sassan Tabatabaei, PhD Questions This Talk Will Answer What are MEMS oscillators, and why do they matter? What is their history,

More information

Webinar: HDI 2 Perfection in HDI Optimal use of the HDI technology Würth Elektronik Circuit Board Technology

Webinar: HDI 2 Perfection in HDI Optimal use of the HDI technology Würth Elektronik Circuit Board Technology Webinar: HDI 2 Perfection in HDI Optimal use of the HDI technology Würth Elektronik Circuit Board Technology www.we-online.de Seite 1 04.09.2013 Agenda Overview Webinar HDI 1 Route out a BGA Costs Roadmap

More information

Connected Intelligence

Connected Intelligence Connected Intelligence Bringing the IoT to Life Steve Wainwright EMEA VP Sales & Marketing J u l. 0 1. 2 0 1 4 External Use The Next Big Thing: The Internet of Things 50 BILLION World Population # Connected

More information

HDI-Baugruppen der Zukunft - Applikationen, Entwurf, Technologien

HDI-Baugruppen der Zukunft - Applikationen, Entwurf, Technologien HDI-Baugruppen der Zukunft - Applikationen, Entwurf, Technologien 2,5D SiP Vertikale Integration heterogener Mikroschaltungen Stephan Guttowski 2), David Polityko 1), Herbert Reichl 1) 1) Technical University

More information

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / Grenoble)

Microstockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / Grenoble) Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations

More information

Introduction to Microfluidics. Date: 2013/04/26. Dr. Yi-Chung Tung. Outline

Introduction to Microfluidics. Date: 2013/04/26. Dr. Yi-Chung Tung. Outline Introduction to Microfluidics Date: 2013/04/26 Dr. Yi-Chung Tung Outline Introduction to Microfluidics Basic Fluid Mechanics Concepts Equivalent Fluidic Circuit Model Conclusion What is Microfluidics Microfluidics

More information

OmniBSI TM Technology Backgrounder. Embargoed News: June 22, 2009. OmniVision Technologies, Inc.

OmniBSI TM Technology Backgrounder. Embargoed News: June 22, 2009. OmniVision Technologies, Inc. OmniBSI TM Technology Backgrounder Embargoed News: June 22, 2009 OmniVision Technologies, Inc. At the heart of any digital camera lies the image sensor. The image sensor is an integrated circuit, like

More information

Multilevel Socket Technologies

Multilevel Socket Technologies Multilevel Socket Technologies High Performance IC Sockets And Test Adapters Overview Company Overview Over 5,000 products High Performance Adapters and Sockets Many Custom Designs & Turn-Key Solutions

More information