IPCam Software Brief User Manual

Transcription

1 IPCam Software Brief User Manual Content 1. Installation Introduction of Icons login Introduction How to set Logout Statement... 12

2 1. Installation More Security, More Convenience Note: This IPcam software is match with all Apexis MPJEG and H264 camera Before installation, pls kindly turn off your firewall and Antivirus, so that IPcam software can be install into computer completely and successfully. Pls don t worried, the software is safe and won t bring any hurt to your computer. Note: If computer suggest restarting computer before the first usage, then pls restart computer, then use IPcam software.

3

4 2. Introduction of Icons 1.login Double click the IPcam, you will see the login interface as below, choose English: Then enter the username and password. The orginal username is admin, password also is admin; then click OK to go to the interface:

5 2. Introduction In the interface, you can see the 1window to 64 windows You can see the map function; page up/down; and other Icon, see below: : Software supports 1 to 64 windows for recording and viewing. So you can choose 1window,4 windows,9 windows 64 windows you need to view or record. : view in full screen; : page up/down;

6 : system setting; here you can set: basic settings; user settings; e-map settings; device list; : Map settings: pls kindly note that you need to set the map in your LAN network before using map function. : lock/unlock the IPCam software; : to logout the IPCam software; : to connect/disconnect the IP camera you have set. Pls kindly note that you need to set the ip camera, and choose the right window for connecting the ip camera. : play/stop, to view/stop the real time picture of camera; Speaker; : two-way audio, this function is to active the Mic and : to record/make snapshot;

7 : this is for the PTZ control; : this is for the preset position; when you click this Icon, you can view the position you have preset; note that you need to preset the position, so that you can use this Icon. : this is for setting the parameter of IP camera; : You can choose the type which match with your IP camera: H.264/MPJEG;if your camera is MPJEG compression, then you need to choose MPJEG; If your camera is H.264, you need to choose H.264; 3. How to set Before use IPcam, pls make sure firmware of your IP camera begin with: ** Click, Then you can see ; choose which can match your IP camera; if your camera is MPJEG compression, then you can move the move mouse to MJPEG, then right click, then you choose Add device ; if your camera with h264 compression, then you can move the mouse to H264, then right click, choose add device Let s use MJPEG for example: After right click MJPEG, you will see: For your camera is MJPEG, pls choose MJPEG, then Click OK;

8 After click Search, you can see a dialog box which will show you ip camera online:

9 Then the IP camera information will show in the IPcam software:

10 When you can see the IP camera information: Device Name; IP address; Port; that means the IPcam Software works well, you need to enter View Account and View Password you have set(user name and password), the factory setting View account is admin, no View password. Note: you need to set the Port in camera before use the IPcam Software if you use DDNS to view ;( pls do not use 80 as port, any number is ok) If you can not search the IP camera address, which means your computer IP address can not match with IP camera address. You need to enter the correct user and password in View Account and View Password. Then click OK, you will finish settings and see:

11 Move your mouse to the window you can see your camera name, and right click, choose Connect, then you can view now, see below: To add other camera to other windows is the same way.

12 4.Logout If you want to logout, you just need to click in the buttom, then you can see: Then enter the username and password you have set, the factory setting: username: admin; password: admin; After enter username and password, the click OK to logout. 5.Statement This Brief User manual is written by Carson from Apexis, not from the Apexis Official User manual, the Apexis official User manual will be come out soon and can be downloaded in If you still meet some problem you can not solved yourself, pls kindly Contact Apexis tech team: